Megatest

(define *test-paths*        (make-hash-table)) ;; cache test-id to test run paths here
(define *test-ids*          (make-hash-table)) ;; cache run-id, testname, and item-path => test-id
(define *test-info*         (make-hash-table)) ;; cache the test info records, update the state, status, run_duration etc. from testdat.db

(define *run-info-cache*    (make-hash-table)) ;; run info is stable, no need to reget
(define *launch-setup-mutex* (make-mutex))     ;; need to be able to call launch:setup often so mutex it and re-call the real deal only if *toppath* not set
(define *homehost-mutex*     (make-mutex))

;; cache environment vars for each run here
(define *env-vars-by-run-id* (make-hash-table))

;; Testconfig and runconfig caches. 
(define *testconfigs*       (make-hash-table)) ;; test-name => testconfig
(define *runconfigs*        (make-hash-table)) ;; target    => runconfig

;; This is a cache of pre-reqs met, don't re-calc in cases where called with same params less than

;;======================================================================
;; E X I T   H A N D L I N G
;;======================================================================

(define (common:run-sync?)
  (let ((ohh (common:on-homehost?))
	(srv (args:get-arg "-server")))
    ;; (debug:print-info 0 *default-log-port* "common:run-sync? ohh=" ohh ", srv=" srv)
    (and (common:on-homehost?)
	 (args:get-arg "-server"))))

;;;; run-ids
;;    if #f use *db-local-sync* : or 'local-sync-flags
;;    if #t use timestamps      : or 'timestamps
(define (common:sync-to-megatest.db dbstruct) 

			  (debug:print-info 0 *default-log-port* "Waiting for server alive signature")
                          (mutex-lock! *heartbeat-mutex*)
                          (set! sdat *server-info*)
                          (mutex-unlock! *heartbeat-mutex*)
                          (if (and sdat
				   (not changed)
				   (> (- (current-seconds) start-time) 2))
			      (begin
				(debug:print-info 0 *default-log-port* "Received server alive signature")
				sdat)
                              (begin
				(debug:print-info 0 *default-log-port* "Still waiting, last-sdat=" last-sdat)
                                (sleep 4)
				(if (> (- (current-seconds) start-time) 120) ;; been waiting for two minutes
				    (begin
				      (debug:print-error 0 *default-log-port* "transport appears to have died, exiting server " server-id " for run " run-id)
				      (tasks:server-delete-record (db:delay-if-busy tdbdat) server-id "failed to start, never received server alive signature")
				      (exit))
				    (loop start-time
					  (equal? sdat last-sdat)
					  sdat)))))))
         (iface       (car server-info))
         (port        (cadr server-info))
         (last-access 0)
	 (server-timeout (server:get-timeout))
	 (server-going  #f))
    (let loop ((count         0)
	       (server-state 'available)
	       (bad-sync-count 0)
	       (start-time     (current-milliseconds)))

      ;; Use this opportunity to sync the tmp db to megatest.db
      (if (not server-going) ;; *dbstruct-db* 




	    ;; Removed code is pasted below (keeping it around until we are clear it is not needed).
	    ;; no *dbstruct-db* yet, set running after our first pass through and start the db
	    (if (eq? server-state 'available)
		(let ((new-server-id (tasks:server-am-i-the-server? (db:delay-if-busy tdbdat) run-id))) ;; try to ensure no double registering of servers
		  (if (equal? new-server-id server-id)
		      (begin
			(tasks:server-set-state! (db:delay-if-busy tdbdat) server-id "dbprep")
			(thread-sleep! 0.5) ;; give some margin for queries to complete before switching from file based access to server based access
			(set! *dbstruct-db*  (db:setup)) ;;  run-id))
			(set! server-going #t)
			(tasks:server-set-state! (db:delay-if-busy tdbdat) server-id "running")
			(server:write-dotserver *toppath* (conc iface ":" port))
			(delete-file* (conc *toppath* "/.starting-server")))
		      (begin ;; gotta exit nicely
			(tasks:server-set-state! (db:delay-if-busy tdbdat) server-id "collision")
			(http-transport:server-shutdown server-id port))))))

      ;; when things go wrong we don't want to be doing the various queries too often
      ;; so we strive to run this stuff only every four seconds or so.
      (let* ((sync-time (- (current-milliseconds) start-time))
	    (rem-time  (quotient (- 4000 sync-time) 1000)))
	(if (and (<= rem-time 4)
		 (>  rem-time 0))
	    (thread-sleep! rem-time)))
      
      (if (< count 1) ;; 3x3 = 9 secs aprox
	  (loop (+ count 1) 'running bad-sync-count (current-milliseconds)))
      
      ;; Check that iface and port have not changed (can happen if server port collides)
      (mutex-lock! *heartbeat-mutex*)
      (set! sdat *server-info*)
      (mutex-unlock! *heartbeat-mutex*)
      
      (if (or (not (equal? sdat (list iface port)))

	      ;;
	      ;; Consider implementing some smarts here to re-insert the record or kill self is
	      ;; the db indicates so
	      ;;
	      ;; (if (tasks:server-am-i-the-server? tdb run-id)
	      ;;     (tasks:server-set-state! tdb server-id "running"))
	      ;;
	      (loop 0 server-state bad-sync-count (current-milliseconds)))
	    (http-transport:server-shutdown server-id port))))))

;; code cut out from above
;;
;; (condition-case
;;  ;; (if (and (member (mutex-state *db-sync-mutex*) '(abandoned not-abandoned))
;;  ;;	      (> (- (current-seconds) *db-last-sync*) 5)) ;; if not currently being synced nor recently synced

    (exit)))

;; all routes though here end in exit ...
;;
;; start_server? 
;;
(define (http-transport:launch run-id)
  (with-output-to-file
      (conc *toppath* "/.starting-server")
    (lambda ()
      (print (current-process-id) " on " (get-host-name))))
  (let* ((tdbdat (tasks:open-db)))
    (set! *run-id*   run-id)
    (if (args:get-arg "-daemonize")
	(begin
	  (daemon:ize)
	  (if *alt-log-file* ;; we should re-connect to this port, I think daemon:ize disrupts it
	      (begin
		(current-error-port *alt-log-file*)
		(current-output-port *alt-log-file*)))))
    (if (server:check-if-running run-id)
	(begin
	  (debug:print 0 *default-log-port* "INFO: Server for run-id " run-id " already running")
	  (exit 0))
	(begin ;; ok, no server detected, clean out any lingering records
	   (tasks:server-force-clean-running-records-for-run-id  (db:delay-if-busy tdbdat) run-id "notresponding")))
    (let loop ((server-id (tasks:server-lock-slot (db:delay-if-busy tdbdat) run-id))
	       (remtries  4))
      (if (not server-id)
	  (if (> remtries 0)
	      (begin
		(thread-sleep! 2)
		(loop (tasks:server-lock-slot (db:delay-if-busy tdbdat) run-id)
		      (- remtries 1)))
	      (begin
		;; since we didn't get the server lock we are going to clean up and bail out
		(debug:print-info 2 *default-log-port* "INFO: server pid=" (current-process-id) ", hostname=" (get-host-name) " not starting due to other candidates ahead in start queue")
		(tasks:server-delete-records-for-this-pid (db:delay-if-busy tdbdat) " http-transport:launch")
		(delete-file* (conc *toppath* "/.starting-server"))
		))
	  (let* ((th2 (make-thread (lambda ()
				     (debug:print-info 0 *default-log-port* "Server run thread started")
				     (http-transport:run 
				      (if (args:get-arg "-server")
					  (args:get-arg "-server")
					  "-")

	    (begin
	      (thread-sleep! 3) ;; (+ 3 (random 6))) ;; add some jitter to the call home time to spread out the db accesses
	      (if (hash-table-ref/default misc-flags 'keep-going #f)  ;; keep originals for cpu-load and disk-free unless they change more than the allowed delta
		  (loop (calc-minutes) (or new-cpu-load cpu-load) (or new-disk-free disk-free)))))))
    (tests:update-central-meta-info run-id test-id (get-cpu-load) (get-df (current-directory))(calc-minutes) #f #f))) ;; NOTE: Checking twice for keep-going is intentional

(define (launch:execute encoded-cmd)
  (let* ((cmdinfo    (common:read-encoded-string encoded-cmd))
	 (tconfigreg #f))
    (setenv "MT_CMDINFO" encoded-cmd)
    (if (list? cmdinfo) ;; ((testpath /tmp/mrwellan/jazzmind/src/example_run/tests/sqlitespeed)
	;; (test-name sqlitespeed) (runscript runscript.rb) (db-host localhost) (run-id 1))
	(let* ((testpath  (assoc/default 'testpath  cmdinfo))  ;; testpath is the test spec area
	       (top-path  (assoc/default 'toppath   cmdinfo))
	       (work-area (assoc/default 'work-area cmdinfo))  ;; work-area is the test run area
	       (test-name (assoc/default 'test-name cmdinfo))

	    (if (or (file-exists? top-path)
		    (> count 10))
		(change-directory top-path)
		(begin
		  (debug:print 0 *default-log-port* "INFO: Not starting job yet - directory " top-path " not found")
		  (thread-sleep! 10)
		  (loop (+ count 1)))))
	  (launch:setup) ;; should be properly in the top-path now
	  (set! tconfigreg (tests:get-all))
	  (let ((sighand (lambda (signum)
			   ;; (signal-mask! signum) ;; to mask or not? seems to cause issues in exiting
			   (if (eq? signum signal/stop)
			       (debug:print-error 0 *default-log-port* "attempt to STOP process. Exiting."))
			   (set! *time-to-exit* #t)
			   (print "Received signal " signum ", cleaning up before exit. Please wait...")
			   (let ((th1 (make-thread (lambda ()

;;   side effects:
;;     sets; *configdat*    (megatest.config info)
;;           *runconfigdat* (runconfigs.config info)
;;           *configstatus* (status of the read data)
;;
(define (launch:setup #!key (force #f))
  (mutex-lock! *launch-setup-mutex*)
  (if (and *toppath*
	   (eq? *configstatus* 'fulldata)) ;; got it all
      (begin
	(debug:print 0 *default-log-port* "NOTE: skipping launch:setup-body call since we have fulldata")
	(mutex-unlock! *launch-setup-mutex*)
	*toppath*)
      (let ((res (launch:setup-body force: force)))
	(mutex-unlock! *launch-setup-mutex*)
	res)))

(define (launch:setup-body #!key (force #f))

;;======================================================================

(if (args:get-arg "-server")

    ;; Server? Start up here.
    ;;
    (let ((tl        (launch:setup))
	;; (run-id    (and (args:get-arg "-run-id")
	;; 		  (string->number (args:get-arg "-run-id"))))
          (transport-type (string->symbol (or (args:get-arg "-transport") "http"))))
      ;; (if run-id
      ;;   (begin
      (server:launch 0 transport-type)
      (set! *didsomething* #t)))
;;     ;; (debug:print-error 0 *default-log-port* "server requires run-id be specified with -run-id")))
;; 
;;     ;; Not a server? This section will decide how to communicate
;;     ;;
;;     ;;  Setup client for all expect listed here
;;     (if (null? (lset-intersection 
;; 		equal?
;; 		(hash-table-keys args:arg-hash)
;; 		'("-list-servers"
;; 		  "-stop-server"
;;                   "-kill-server"
;; 		  "-show-cmdinfo"
;; 		  "-list-runs"
;; 		  "-ping")))
;; 	(if (launch:setup)
;; 	    (let ((run-id    (and (args:get-arg "-run-id")
;; 				  (string->number (args:get-arg "-run-id")))))
;; 	      ;; (set! *fdb*   (filedb:open-db (conc *toppath* "/db/paths.db")))
;; 	      ;; if not list or kill then start a client (if appropriate)
;; 	      (if (or (args-defined? "-h" "-version" "-create-megatest-area" "-create-test")
;; 		      (eq? (length (hash-table-keys args:arg-hash)) 0))
;; 		  (debug:print-info 1 *default-log-port* "Server connection not needed")
;; 		  (begin
;; 		    ;; (if run-id 
;; 		    ;;     (client:launch run-id) 
;; 		    ;;     (client:launch 0)      ;; without run-id we'll start a server for "0"
;; 		    #t
;; 		    ))))))

(if (or (args:get-arg "-list-servers")
	(args:get-arg "-stop-server")
        (args:get-arg "-kill-server"))
    (let ((tl (launch:setup)))
      (if tl 
	  (let* ((tdbdat  (tasks:open-db))

  ;; clean out old connections
  ;; (mutex-lock! *db-multi-sync-mutex*)

  ;; 1. check if server is started IFF cmd is a write OR if we are not on the homehost, store in *runremote*
  ;; 2. check the age of the connections. refresh the connection if it is older than timeout-20 seconds.
  ;; 3. do the query, if on homehost use local access
  ;;
  (if (and ;; #f  ;; FORCE NO GO FOR RIGHT NOW
	   (not *runremote*)                         ;; we trust *runremote* to reflect that a server was found previously
	   (not (member cmd api:read-only-queries))) ;; we don't trust so much the list of write queries
      (let ((serverconn (server:check-if-running *toppath*)))
	(if serverconn
	    (set! *runremote* serverconn) ;; the string can be consumed by the client setup if needed
	    (if (not (server:start-attempted? *toppath*))
		(server:kind-run *toppath*)))))
  
  (rmt:open-qry-close-locally cmd (if rid rid 0) params))

;;   (let ((expire-time (- (current-seconds) (server:get-timeout) 10))) ;; don't forget the 10 second margin
;;     (for-each 
;;      (lambda (run-id)
;;        (let ((connection (hash-table-ref/default *runremote* run-id #f)))

;; try running on that host
;;   incidental: rotate logs in logs/ dir.
;;
(define  (server:run areapath) ;; areapath is ignored for now.
  (let* ((curr-host   (get-host-name))
	 (curr-ip     (server:get-best-guess-address curr-host))
	 (curr-pid    (current-process-id))
	 (homehost    (common:get-homehost)) ;; configf:lookup *configdat* "server" "homehost" ))
	 (target-host (car homehost))
	 (testsuite   (common:get-testsuite-name))
	 (logfile     (conc *toppath* "/logs/server.log"))
	 (cmdln (conc (common:get-megatest-exe)
		      " -server " (or target-host "-") " -run-id " 0 (if (equal? (configf:lookup *configdat* "server" "daemonize") "yes")
									      (conc " -daemonize -log " logfile)
									      "")
		      " -m testsuite:" testsuite)) ;; (conc " >> " logfile " 2>&1 &")))))
	 (log-rotate  (make-thread common:rotate-logs  "server run, rotate logs thread")))
    ;; we want the remote server to start in *toppath* so push there
    (push-directory *toppath*)
    (debug:print 0 *default-log-port* "INFO: Trying to start server (" cmdln ") ...")
    (thread-start! log-rotate)

    ;; host.domain.tld match host?
    (if (and target-host 
	     ;; look at target host, is it host.domain.tld or ip address and does it 
	     ;; match current ip or hostname
	     (not (string-match (conc "("curr-host "|" curr-host"\\..*)") target-host))

	    (> (- (current-seconds) last-run-time) 30))
	(begin
	  (server:run areapath)
	  (hash-table-set! *server-kind-run* areapath (current-seconds))))))

;; The generic run a server command. Dispatches the call to server 0 if run-id != 0
;; 
;;  (define (server:try-running run-id)
;;    (if (eq? run-id 0)
;;        (server:run run-id)
;;        (rmt:start-server run-id)))
(define server:try-running server:run) ;; there is no more per-run servers ;; REMOVE ME. BUG.

(define (server:start-attempted? areapath)
  (let ((flagfile (conc areapath "/.starting-server")))
    (and (file-exists? flagfile)
	 (< (- (current-seconds)
	       (file-modification-time flagfile))
	    15)))) ;; exists and less than 15 seconds old
    
(define (server:read-dotserver areapath)
  (let ((dotfile (conc areapath "/.server")))
    (if (and (file-exists? dotfile)
	     (file-read-access? dotfile))
	(with-input-from-file
	    dotfile
	  (lambda ()