Megatest

Artifact [1582aa56da]
Login

Artifact 1582aa56dac28e3c2b3cc1ff10d37ad5537fdc9c:


;;======================================================================
;; Copyright 2006-2013, Matthew Welland.
;; 
;;  This program is made available under the GNU GPL version 2.0 or
;;  greater. See the accompanying file COPYING for details.
;; 
;;  This program is distributed WITHOUT ANY WARRANTY; without even the
;;  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
;;  PURPOSE.
;;======================================================================

(use json format) ;; RADT => purpose of json format??

(declare (unit rmt))
(declare (uses api))
(declare (uses tdb))
(declare (uses http-transport))
;;(declare (uses nmsg-transport))
;;
;; THESE ARE ALL CALLED ON THE CLIENT SIDE!!!
;;

;; ;; For debugging add the following to ~/.megatestrc
;;
;; (require-library trace)
;; (import trace)
;; (trace
;; rmt:send-receive
;; api:execute-requests
;; )

;; generate entries for ~/.megatestrc with the following
;;
;;  grep define ../rmt.scm | grep rmt: |perl -pi -e 's/\(define\s+\((\S+)\W.*$/\1/'|sort -u


;;======================================================================
;;  S U P P O R T   F U N C T I O N S
;;======================================================================

;; if a server is either running or in the process of starting call client:setup
;; else return #f to let the calling proc know that there is no server available
;;
(define (rmt:get-connection-info run-id)
  (let ((cinfo *runremote*)) ;; (hash-table-ref/default *runremote* run-id #f)))
    (if cinfo
	cinfo
	(if (tasks:server-running-or-starting? (db:delay-if-busy (tasks:open-db)) run-id)
	    (client:setup run-id)
	    #f))))

(define *send-receive-mutex* (make-mutex)) ;; should have separate mutex per run-id

;; RA => e.g. usage (rmt:send-receive 'get-var #f (list varname))
;;
(define (rmt:send-receive cmd rid params #!key (attemptnum 1)) ;; start attemptnum at 1 so the modulo below works as expected
  ;; clean out old connections
  ;; (mutex-lock! *db-multi-sync-mutex*)

  ;; 1. check if server is started IFF cmd is a write OR if we are not on the homehost, store in *runremote*
  ;; 2. check the age of the connections. refresh the connection if it is older than timeout-20 seconds.
  ;; 3. do the query, if on homehost use local access
  ;;
  (if (and ;; #f  ;; FORCE NO GO FOR RIGHT NOW
	   (not *runremote*)                         ;; we trust *runremote* to reflect that a server was found previously
	   (not (member cmd api:read-only-queries))) ;; we don't trust so much the list of write queries
      (let ((serverconn (server:check-if-running *toppath*)))
	(if serverconn
	    (set! *runremote* serverconn) ;; the string can be consumed by the client setup if needed
	    (if (not (server:start-attempted? *toppath*))
		(server:kind-run *toppath*)))))
  
  (rmt:open-qry-close-locally cmd (if rid rid 0) params))

;;   (let ((expire-time (- (current-seconds) (server:get-timeout) 10))) ;; don't forget the 10 second margin
;;     (for-each 
;;      (lambda (run-id)
;;        (let ((connection (hash-table-ref/default *runremote* run-id #f)))
;;          (if (and (vector? connection)
;;         	  (< (http-transport:server-dat-get-last-access connection) expire-time))
;;              (begin
;;                (debug:print-info 0 *default-log-port* "Discarding connection to server for run-id " run-id ", too long between accesses")
;;                ;; bb- disabling nanomsg
;;                ;; SHOULD CLOSE THE CONNECTION HERE 
;; 	       ;; (case *transport-type*
;; 	       ;;   ((nmsg)(nn-close (http-transport:server-dat-get-socket 
;; 	       ;;  		   (hash-table-ref *runremote* run-id)))))
;;                (hash-table-delete! *runremote* run-id)))))
;;      (hash-table-keys *runremote*)))
;;   ;; (mutex-unlock! *db-multi-sync-mutex*)
;;   ;; (mutex-lock! *send-receive-mutex*)
;;   (let* ((run-id          (if rid rid 0))
;; 	 (home-host       (common:get-homehost))
;; 	 (connection-info (if (cdr home-host) ;; we are on the home-host
;; 			      #f
;; 			      (rmt:get-connection-info run-id))))
;;     (cond
;;      (home-host        (rmt:open-qry-close-locally cmd run-id params))
;;      (connection-info
;;       ;; the nmsg method does the encoding under the hood (the http method should be changed to do this also)
;;       ;; use the server if have connection info
;;       (let* ((dat     (case *transport-type*
;; 			((http)(condition-case
;; 				(http-transport:client-api-send-receive run-id connection-info cmd params)
;; 				((commfail)(vector #f "communications fail"))
;; 				((exn)(vector #f "other fail"))))
;; 			;; ((nmsg)(condition-case
;; 			;;         (nmsg-transport:client-api-send-receive run-id connection-info cmd params)
;; 			;;         ((timeout)(vector #f "timeout talking to server"))))
;; 			(else  (exit))))
;; 	     (success (if (vector? dat) (vector-ref dat 0) #f))
;; 	     (res     (if (vector? dat) (vector-ref dat 1) #f)))
;; 	(if (vector? connection-info)(http-transport:server-dat-update-last-access connection-info))
;; 	(if success
;; 	    (begin
;; 	      ;; (mutex-unlock! *send-receive-mutex*)
;; 	      (case *transport-type* 
;; 		((http) res) ;; (db:string->obj res))
;; 		;; ((nmsg) res)
;; 		)) ;; (vector-ref res 1)))
;; 	    (begin ;; let ((new-connection-info (client:setup run-id)))
;; 	      (debug:print 0 *default-log-port* "WARNING: Communication failed, trying call to rmt:send-receive again.")
;; 	      ;; (case *transport-type*
;; 	      ;;   ((nmsg)(nn-close (http-transport:server-dat-get-socket connection-info))))
;; 	      (hash-table-delete! *runremote* run-id) ;; don't keep using the same connection
;; 	      ;; NOTE: killing server causes this process to block forever. No idea why. Dec 2. 
;; 	      ;; (if (eq? (modulo attemptnum 5) 0)
;; 	      ;;     (tasks:kill-server-run-id run-id tag: "api-send-receive-failed"))
;; 	      ;; (mutex-unlock! *send-receive-mutex*) ;; close the mutex here to allow other threads access to communications
;; 	      (tasks:start-and-wait-for-server (tasks:open-db) run-id 15)
;; 	      ;; (nmsg-transport:client-api-send-receive run-id connection-info cmd param remtries: (- remtries 1))))))
;; 	      
;; 	      ;; no longer killing the server in http-transport:client-api-send-receive
;; 	      ;; may kill it here but what are the criteria?
;; 	      ;; start with three calls then kill server
;; 	      ;; (if (eq? attemptnum 3)(tasks:kill-server-run-id run-id))
;; 	      ;; (thread-sleep! 2)
;; 	      (rmt:send-receive cmd run-id params attemptnum: (+ attemptnum 1))))))
;;      (else
;;      ;; no connection info? try to start a server, or access locally if no
;;       ;; server and the query is read-only
;;       ;;
;;       ;; Note: The tasks db was checked for a server in starting mode in the rmt:get-connection-info call
;;       ;;
;;       (if (and (< attemptnum 15)
;; 	       (member cmd api:write-queries))
;; 	  (let ((homehost  (common:get-homehost))) ;; faststart (configf:lookup *configdat* "server" "faststart")))
;; 	      (hash-table-delete! *runremote* run-id)
;; 	      ;; (mutex-unlock! *send-receive-mutex*)
;; 	      (if (not (cdr homehost)) ;; we always require a server if not on homehost ;; (and faststart (equal? faststart "no"))
;; 		  (begin
;; 		    (tasks:start-and-wait-for-server (db:delay-if-busy (tasks:open-db)) run-id 10)
;; 		    (thread-sleep! (random 5)) ;; give some time to settle and minimize collison?
;; 		    (rmt:send-receive cmd rid params attemptnum: (+ attemptnum 1)))
;; 		  ;; NB - probably can remove the query time stuff but need to discuss it ....
;; 		  (let ((start-time (current-milliseconds))
;; 			(max-query  (string->number (or (configf:lookup *configdat* "server" "server-query-threshold")
;; 							"300")))
;; 			(newres     (rmt:open-qry-close-locally cmd run-id params)))
;; 		    (let ((delta (- (current-milliseconds) start-time)))
;; 		      (if (> delta max-query)
;; 			  (begin
;; 			    (debug:print-info 0 *default-log-port* "WARNING: long query times, you may have an overloaded homehost.") ;; Starting server as query time " delta " is over the limit of " max-query)
;; 			    ;; (server:kind-run run-id)))
;; 			    ))
;; 		      ;; return the result!
;; 		      newres)
;; 		    )))
;; 	  (begin
;; 	    ;; (debug:print-error 0 *default-log-port* "Communication failed!")
;; 	    ;; (mutex-unlock! *send-receive-mutex*)
;; 	    ;; (exit)
;; 	    (rmt:open-qry-close-locally cmd run-id params)
;; 	    ))))))

(define (rmt:update-db-stats run-id rawcmd params duration)
  (mutex-lock! *db-stats-mutex*)
  (handle-exceptions
   exn
   (begin
     (debug:print 0 *default-log-port* "WARNING: stats collection failed in update-db-stats")
     (debug:print 0 *default-log-port* " message: " ((condition-property-accessor 'exn 'message) exn))
     (print "exn=" (condition->list exn))
     #f) ;; if this fails we don't care, it is just stats
   (let* ((cmd      (conc "run-id=" run-id " " (if (eq? rawcmd 'general-call) (car params) rawcmd)))
	  (stat-vec (hash-table-ref/default *db-stats* cmd #f)))
     (if (not (vector? stat-vec))
	 (let ((newvec (vector 0 0)))
	   (hash-table-set! *db-stats* cmd newvec)
	   (set! stat-vec newvec)))
     (vector-set! stat-vec 0 (+ (vector-ref stat-vec 0) 1))
     (vector-set! stat-vec 1 (+ (vector-ref stat-vec 1) duration))))
  (mutex-unlock! *db-stats-mutex*))


(define (rmt:print-db-stats)
  (let ((fmtstr "~40a~7-d~9-d~20,2-f")) ;; "~20,2-f"
    (debug:print 18 *default-log-port* "DB Stats\n========")
    (debug:print 18 *default-log-port* (format #f "~40a~8a~10a~10a" "Cmd" "Count" "TotTime" "Avg"))
    (for-each (lambda (cmd)
		(let ((cmd-dat (hash-table-ref *db-stats* cmd)))
		  (debug:print 18 *default-log-port* (format #f fmtstr cmd (vector-ref cmd-dat 0) (vector-ref cmd-dat 1) (/ (vector-ref cmd-dat 1)(vector-ref cmd-dat 0))))))
	      (sort (hash-table-keys *db-stats*)
		    (lambda (a b)
		      (> (vector-ref (hash-table-ref *db-stats* a) 0)
			 (vector-ref (hash-table-ref *db-stats* b) 0)))))))

(define (rmt:get-max-query-average run-id)
  (mutex-lock! *db-stats-mutex*)
  (let* ((runkey (conc "run-id=" run-id " "))
	 (cmds   (filter (lambda (x)
			   (substring-index runkey x))
			 (hash-table-keys *db-stats*)))
	 (res    (if (null? cmds)
		     (cons 'none 0)
		     (let loop ((cmd (car cmds))
				(tal (cdr cmds))
				(max-cmd (car cmds))
				(res 0))
		       (let* ((cmd-dat (hash-table-ref *db-stats* cmd))
			      (tot     (vector-ref cmd-dat 0))
			      (curravg (/ (vector-ref cmd-dat 1) (vector-ref cmd-dat 0))) ;; count is never zero by construction
			      (currmax (max res curravg))
			      (newmax-cmd (if (> curravg res) cmd max-cmd)))
			 (if (null? tal)
			     (if (> tot 10)
				 (cons newmax-cmd currmax)
				 (cons 'none 0))
			     (loop (car tal)(cdr tal) newmax-cmd currmax)))))))
    (mutex-unlock! *db-stats-mutex*)
    res))

(define (rmt:open-qry-close-locally cmd run-id params #!key (remretries 5))
  (let* ((qry-is-write   (not (member cmd api:read-only-queries)))
	 (db-file-path   (db:dbfile-path)) ;;  0))
	 (dbstruct-local (db:setup))  ;; make-dbr:dbstruct path:  dbdir local: #t)))
	 (read-only      (not (file-write-access? db-file-path)))
	 (start          (current-milliseconds))
	 (resdat         (if (not (and read-only qry-is-write))
			     (api:execute-requests dbstruct-local (vector (symbol->string cmd) params))
			     (vector #t '())))
	 (success        (vector-ref resdat 0))
	 (res            (vector-ref resdat 1))
	 (duration       (- (current-milliseconds) start)))
    (if (and read-only qry-is-write)
        (debug:print 0 *default-log-port* "ERROR: attempt to write to read-only database ignored. cmd=" cmd))
    (if (not success)
	(if (> remretries 0)
	    (begin
	      (debug:print-error 0 *default-log-port* "local query failed. Trying again.")
	      (thread-sleep! (/ (random 5000) 1000)) ;; some random delay 
	      (rmt:open-qry-close-locally cmd run-id params remretries: (- remretries 1)))
	    (begin
	      (debug:print-error 0 *default-log-port* "too many retries in rmt:open-qry-close-locally, giving up")
	      #f))
	(begin
	  ;; (rmt:update-db-stats run-id cmd params duration)
	  ;; mark this run as dirty if this was a write, the watchdog is responsible for syncing it
	  (if qry-is-write
	      (let ((start-time (current-seconds)))
		(mutex-lock! *db-multi-sync-mutex*)
		(set! *db-last-write* start-time) ;; the oldest "write"
                (mutex-unlock! *db-multi-sync-mutex*)))))
    res))

(define (rmt:send-receive-no-auto-client-setup connection-info cmd run-id params)
  (let* ((run-id   (if run-id run-id 0))
	 ;; (jparams  (db:obj->string params)) ;; (rmt:dat->json-str params))
	 (res  	   (handle-exceptions
		    exn
		    #f
		    (http-transport:client-api-send-receive run-id connection-info cmd params))))
;;		    ((commfail) (vector #f "communications fail")))))
    (if (and res (vector-ref res 0))
	(vector-ref res 1) ;;; YES!! THIS IS CORRECT!! CHANGE IT HERE, THEN CHANGE rmt:send-receive ALSO!!!
	#f)))
;; 	(db:string->obj (vector-ref dat 1))
;; 	(begin
;; 	  (debug:print-error 0 *default-log-port* "rmt:send-receive-no-auto-client-setup failed, attempting to continue. Got " dat)
;; 	  dat))))

;; Wrap json library for strings (why the ports crap in the first place?)
(define (rmt:dat->json-str dat)
  (with-output-to-string 
    (lambda ()
      (json-write dat))))

(define (rmt:json-str->dat json-str)
  (with-input-from-string json-str
    (lambda ()
      (json-read))))

;;======================================================================
;;
;; A C T U A L   A P I   C A L L S  
;;
;;======================================================================

;;======================================================================
;;  S E R V E R
;;======================================================================

(define (rmt:kill-server run-id)
  (rmt:send-receive 'kill-server run-id (list run-id)))

(define (rmt:start-server run-id)
  (rmt:send-receive 'start-server 0 (list run-id)))

;;======================================================================
;;  M I S C
;;======================================================================

(define (rmt:login run-id)
  (rmt:send-receive 'login run-id (list *toppath* megatest-version run-id *my-client-signature*)))

;; This login does no retries under the hood - it acts a bit like a ping.
;; Deprecated for nmsg-transport.
;;
(define (rmt:login-no-auto-client-setup connection-info)
  (case *transport-type* ;; run-id of 0 is just a placeholder
    ((http)(rmt:send-receive-no-auto-client-setup connection-info 'login 0 (list *toppath* megatest-version *my-client-signature*)))
    ;;((nmsg)(nmsg-transport:client-api-send-receive run-id connection-info 'login (list *toppath* megatest-version run-id *my-client-signature*)))
    ))

;; hand off a call to one of the db:queries statements
;; added run-id to make looking up the correct db possible 
;;
(define (rmt:general-call stmtname run-id . params)
  (rmt:send-receive 'general-call run-id (append (list stmtname run-id) params)))

;; (define (rmt:sync-inmem->db run-id)
;;   (rmt:send-receive 'sync-inmem->db run-id '()))

(define (rmt:sdb-qry qry val run-id)
  ;; add caching if qry is 'getid or 'getstr
  (rmt:send-receive 'sdb-qry run-id (list qry val)))

;; NOT COMPLETED
(define (rmt:runtests user run-id testpatt params)
  (rmt:send-receive 'runtests run-id testpatt))

;;======================================================================
;;  K E Y S 
;;======================================================================

;; These require run-id because the values come from the run!
;;
(define (rmt:get-key-val-pairs run-id)
  (rmt:send-receive 'get-key-val-pairs run-id (list run-id)))

(define (rmt:get-keys)
  (if *db-keys* *db-keys* 
     (let ((res (rmt:send-receive 'get-keys #f '())))
       (set! *db-keys* res)
       res)))

;; we don't reuse run-id's (except possibly *after* a db cleanup) so it is safe
;; to cache the resuls in a hash
;;
(define (rmt:get-key-vals run-id)
  (or (hash-table-ref/default *keyvals* run-id #f)
      (let ((res (rmt:send-receive 'get-key-vals #f (list run-id))))
        (hash-table-set! *keyvals* run-id res)
        res)))

(define (rmt:get-targets)
  (rmt:send-receive 'get-targets #f '()))

(define (rmt:get-target run-id)
  (rmt:send-receive 'get-target run-id (list run-id)))

;;======================================================================
;;  T E S T S
;;======================================================================

;; Just some syntatic sugar
(define (rmt:register-test run-id test-name item-path)
  (rmt:general-call 'register-test run-id run-id test-name item-path))

(define (rmt:get-test-id run-id testname item-path)
  (rmt:send-receive 'get-test-id run-id (list run-id testname item-path)))

(define (rmt:get-test-info-by-id run-id test-id)
  (if (and (number? run-id)(number? test-id))
      (rmt:send-receive 'get-test-info-by-id run-id (list run-id test-id))
      (begin
	(debug:print 0 *default-log-port* "WARNING: Bad data handed to rmt:get-test-info-by-id run-id=" run-id ", test-id=" test-id)
	(print-call-chain (current-error-port))
	#f)))

(define (rmt:test-get-rundir-from-test-id run-id test-id)
  (rmt:send-receive 'test-get-rundir-from-test-id run-id (list run-id test-id)))

(define (rmt:open-test-db-by-test-id run-id test-id #!key (work-area #f))
  (let* ((test-path (if (string? work-area)
			work-area
			(rmt:test-get-rundir-from-test-id run-id test-id))))
    (debug:print 3 *default-log-port* "TEST PATH: " test-path)
    (open-test-db test-path)))

;; WARNING: This currently bypasses the transaction wrapped writes system
(define (rmt:test-set-state-status-by-id run-id test-id newstate newstatus newcomment)
  (rmt:send-receive 'test-set-state-status-by-id run-id (list run-id test-id newstate newstatus newcomment)))

(define (rmt:set-tests-state-status run-id testnames currstate currstatus newstate newstatus)
  (rmt:send-receive 'set-tests-state-status run-id (list run-id testnames currstate currstatus newstate newstatus)))

(define (rmt:get-tests-for-run run-id testpatt states statuses offset limit not-in sort-by sort-order qryvals last-update mode)
  (if (number? run-id)
      (rmt:send-receive 'get-tests-for-run run-id (list run-id testpatt states statuses offset limit not-in sort-by sort-order qryvals last-update mode))
      (begin
	(debug:print-error 0 *default-log-port* "rmt:get-tests-for-run called with bad run-id=" run-id)
	(print-call-chain (current-error-port))
	'())))

;; get stuff via synchash 
(define (rmt:synchash-get run-id proc synckey keynum params)
  (rmt:send-receive 'synchash-get run-id (list run-id proc synckey keynum params)))

;; IDEA: Threadify these - they spend a lot of time waiting ...
;;
(define (rmt:get-tests-for-runs-mindata run-ids testpatt states status not-in)
  (let ((multi-run-mutex (make-mutex))
	(run-id-list (if run-ids
			 run-ids
			 (rmt:get-all-run-ids)))
	(result      '()))
    (if (null? run-id-list)
	'()
	(let loop ((hed     (car run-id-list))
		   (tal     (cdr run-id-list))
		   (threads '()))
	  (if (> (length threads) 5)
	      (loop hed tal (filter (lambda (th)(not (member (thread-state th) '(terminated dead)))) threads))
	      (let* ((newthread (make-thread
				 (lambda ()
				   (let ((res (rmt:send-receive 'get-tests-for-run-mindata hed (list hed testpatt states status not-in))))
				     (if (list? res)
					 (begin
					   (mutex-lock! multi-run-mutex)
					   (set! result (append result res))
					   (mutex-unlock! multi-run-mutex))
					 (debug:print-error 0 *default-log-port* "get-tests-for-run-mindata failed for run-id " hed ", testpatt " testpatt ", states " states ", status " status ", not-in " not-in))))
				 (conc "multi-run-thread for run-id " hed)))
		     (newthreads (cons newthread threads)))
		(thread-start! newthread)
		(thread-sleep! 0.05) ;; give that thread some time to start
		(if (null? tal)
		    newthreads
		    (loop (car tal)(cdr tal) newthreads))))))
    result))

;; ;; IDEA: Threadify these - they spend a lot of time waiting ...
;; ;;
;; (define (rmt:get-tests-for-runs-mindata run-ids testpatt states status not-in)
;;   (let ((run-id-list (if run-ids
;; 			 run-ids
;; 			 (rmt:get-all-run-ids))))
;;     (apply append (map (lambda (run-id)
;; 			 (rmt:send-receive 'get-tests-for-run-mindata run-id (list run-ids testpatt states status not-in)))
;; 		       run-id-list))))

(define (rmt:delete-test-records run-id test-id)
  (rmt:send-receive 'delete-test-records run-id (list run-id test-id)))

;; This is not needed as test steps are deleted on test delete call
;;
;; (define (rmt:delete-test-step-records run-id test-id)
;;   (rmt:send-receive 'delete-test-step-records run-id (list run-id test-id)))

(define (rmt:test-set-status-state run-id test-id status state msg)
  (rmt:send-receive 'test-set-status-state run-id (list run-id test-id status state msg)))

(define (rmt:test-toplevel-num-items run-id test-name)
  (rmt:send-receive 'test-toplevel-num-items run-id (list run-id test-name)))

;; (define (rmt:get-previous-test-run-record run-id test-name item-path)
;;   (rmt:send-receive 'get-previous-test-run-record run-id (list run-id test-name item-path)))

(define (rmt:get-matching-previous-test-run-records run-id test-name item-path)
  (rmt:send-receive 'get-matching-previous-test-run-records run-id (list run-id test-name item-path)))

(define (rmt:test-get-logfile-info run-id test-name)
  (rmt:send-receive 'test-get-logfile-info run-id (list run-id test-name)))

(define (rmt:test-get-records-for-index-file run-id test-name)
  (rmt:send-receive 'test-get-records-for-index-file run-id (list run-id test-name)))

(define (rmt:get-testinfo-state-status run-id test-id)
  (rmt:send-receive 'get-testinfo-state-status run-id (list run-id test-id)))

(define (rmt:test-set-log! run-id test-id logf)
  (if (string? logf)(rmt:general-call 'test-set-log run-id logf test-id)))

(define (rmt:test-set-top-process-pid run-id test-id pid)
  (rmt:send-receive 'test-set-top-process-pid run-id (list run-id test-id pid)))

(define (rmt:test-get-top-process-pid run-id test-id)
  (rmt:send-receive 'test-get-top-process-pid run-id (list run-id test-id)))

(define (rmt:get-run-ids-matching-target keynames target res runname testpatt statepatt statuspatt)
  (rmt:send-receive 'get-run-ids-matching-target #f (list keynames target res runname testpatt statepatt statuspatt)))

;; NOTE: This will open and access ALL run databases. 
;;
(define (rmt:test-get-paths-matching-keynames-target-new keynames target res testpatt statepatt statuspatt runname)
  (let ((run-ids (rmt:get-run-ids-matching-target keynames target res runname testpatt statepatt statuspatt)))
    (apply append 
	   (map (lambda (run-id)
		  (rmt:send-receive 'test-get-paths-matching-keynames-target-new run-id (list run-id keynames target res testpatt statepatt statuspatt runname)))
	   run-ids))))

;; (define (rmt:get-run-ids-matching keynames target res)
;;   (rmt:send-receive #f 'get-run-ids-matching (list keynames target res)))

(define (rmt:get-prereqs-not-met run-id waitons ref-test-name ref-item-path #!key (mode '(normal))(itemmaps #f))
  (rmt:send-receive 'get-prereqs-not-met run-id (list run-id waitons ref-test-name ref-item-path mode itemmaps)))

(define (rmt:get-count-tests-running-for-run-id run-id)
  (rmt:send-receive 'get-count-tests-running-for-run-id run-id (list run-id)))

;; Statistical queries

(define (rmt:get-count-tests-running run-id)
  (rmt:send-receive 'get-count-tests-running run-id (list run-id)))

(define (rmt:get-count-tests-running-for-testname run-id testname)
  (rmt:send-receive 'get-count-tests-running-for-testname run-id (list run-id testname)))

(define (rmt:get-count-tests-running-in-jobgroup run-id jobgroup)
  (rmt:send-receive 'get-count-tests-running-in-jobgroup run-id (list run-id jobgroup)))

;; state and status are extra hints not usually used in the calculation
;;
(define (rmt:roll-up-pass-fail-counts run-id test-name item-path state status comment)
  (rmt:send-receive 'roll-up-pass-fail-counts run-id (list run-id test-name item-path state status comment)))

(define (rmt:update-pass-fail-counts run-id test-name)
  (rmt:general-call 'update-pass-fail-counts run-id test-name test-name test-name))

(define (rmt:top-test-set-per-pf-counts run-id test-name)
  (rmt:send-receive 'top-test-set-per-pf-counts run-id (list run-id test-name)))

(define (rmt:get-raw-run-stats run-id)
  (rmt:send-receive 'get-raw-run-stats run-id (list run-id)))

;;======================================================================
;;  R U N S
;;======================================================================

(define (rmt:get-run-info run-id)
  (rmt:send-receive 'get-run-info run-id (list run-id)))

(define (rmt:get-num-runs runpatt)
  (rmt:send-receive 'get-num-runs #f (list runpatt)))

;; Use the special run-id == #f scenario here since there is no run yet
(define (rmt:register-run keyvals runname state status user)
  (rmt:send-receive 'register-run #f (list keyvals runname state status user)))
    
(define (rmt:get-run-name-from-id run-id)
  (rmt:send-receive 'get-run-name-from-id run-id (list run-id)))

(define (rmt:delete-run run-id)
  (rmt:send-receive 'delete-run run-id (list run-id)))

(define (rmt:update-run-stats run-id stats)
  (rmt:send-receive 'update-run-stats #f (list run-id stats)))

(define (rmt:delete-old-deleted-test-records)
  (rmt:send-receive 'delete-old-deleted-test-records #f '()))

(define (rmt:get-runs runpatt count offset keypatts)
  (rmt:send-receive 'get-runs #f (list runpatt count offset keypatts)))

(define (rmt:get-all-run-ids)
  (rmt:send-receive 'get-all-run-ids #f '()))

(define (rmt:get-prev-run-ids run-id)
  (rmt:send-receive 'get-prev-run-ids #f (list run-id)))

(define (rmt:lock/unlock-run run-id lock unlock user)
  (rmt:send-receive 'lock/unlock-run #f (list run-id lock unlock user)))

;; set/get status
(define (rmt:get-run-status run-id)
  (rmt:send-receive 'get-run-status #f (list run-id)))

(define (rmt:set-run-status run-id run-status #!key (msg #f))
  (rmt:send-receive 'set-run-status #f (list run-id run-status msg)))

(define (rmt:update-run-event_time run-id)
  (rmt:send-receive 'update-run-event_time #f (list run-id)))

(define (rmt:get-runs-by-patt  keys runnamepatt targpatt offset limit fields last-runs-update) ;; fields of #f uses default
  (rmt:send-receive 'get-runs-by-patt #f (list keys runnamepatt targpatt offset limit fields last-runs-update)))

(define (rmt:find-and-mark-incomplete run-id ovr-deadtime)
  (if (rmt:send-receive 'have-incompletes? run-id (list run-id ovr-deadtime))
      (rmt:send-receive 'mark-incomplete run-id (list run-id ovr-deadtime))))

(define (rmt:get-main-run-stats run-id)
  (rmt:send-receive 'get-main-run-stats #f (list run-id)))

(define (rmt:get-var varname)
  (rmt:send-receive 'get-var #f (list varname)))

(define (rmt:set-var varname value)
  (rmt:send-receive 'set-var #f (list varname value)))

;;======================================================================
;; M U L T I R U N   Q U E R I E S
;;======================================================================

;; Need to move this to multi-run section and make associated changes
(define (rmt:find-and-mark-incomplete-all-runs #!key (ovr-deadtime #f))
  (let ((run-ids (rmt:get-all-run-ids)))
    (for-each (lambda (run-id)
	       (rmt:find-and-mark-incomplete run-id ovr-deadtime))
	     run-ids)))

;; get the previous record for when this test was run where all keys match but runname
;; returns #f if no such test found, returns a single test record if found
;; 
;; Run this at the client end since we have to connect to multiple run-id dbs
;;
(define (rmt:get-previous-test-run-record run-id test-name item-path)
  (let* ((keyvals (rmt:get-key-val-pairs run-id))
	 (keys    (rmt:get-keys))
	 (selstr  (string-intersperse  keys ","))
	 (qrystr  (string-intersperse (map (lambda (x)(conc x "=?")) keys) " AND ")))
    (if (not keyvals)
	#f
	(let ((prev-run-ids (rmt:get-prev-run-ids run-id)))
	  ;; for each run starting with the most recent look to see if there is a matching test
	  ;; if found then return that matching test record
	  (debug:print 4 *default-log-port* "selstr: " selstr ", qrystr: " qrystr ", keyvals: " keyvals ", previous run ids found: " prev-run-ids)
	  (if (null? prev-run-ids) #f
	      (let loop ((hed (car prev-run-ids))
			 (tal (cdr prev-run-ids)))
		(let ((results (rmt:get-tests-for-run hed (conc test-name "/" item-path) '() '() ;; run-id testpatt states statuses
						      #f #f #f               ;; offset limit not-in hide/not-hide
						      #f #f #f #f 'normal))) ;; sort-by sort-order qryvals last-update mode
		  (debug:print 4 *default-log-port* "Got tests for run-id " run-id ", test-name " test-name ", item-path " item-path ": " results)
		  (if (and (null? results)
			   (not (null? tal)))
		      (loop (car tal)(cdr tal))
		      (if (null? results) #f
			  (car results))))))))))

(define (rmt:get-run-stats)
  (rmt:send-receive 'get-run-stats #f '()))

;;======================================================================
;;  S T E P S
;;======================================================================

;; Getting steps is more complicated.
;;
;; If given work area 
;;  1. Find the testdat.db file
;;  2. Open the testdat.db file and do the query
;; If not given the work area
;;  1. Do a remote call to get the test path
;;  2. Continue as above
;; 
;;(define (rmt:get-steps-for-test run-id test-id)
;;  (rmt:send-receive 'get-steps-data run-id (list test-id)))

(define (rmt:teststep-set-status! run-id test-id teststep-name state-in status-in comment logfile)
  (let* ((state     (items:check-valid-items "state" state-in))
	 (status    (items:check-valid-items "status" status-in)))
    (if (or (not state)(not status))
	(debug:print 3 *default-log-port* "WARNING: Invalid " (if status "status" "state")
		     " value \"" (if status state-in status-in) "\", update your validvalues section in megatest.config"))
    (rmt:send-receive 'teststep-set-status! run-id (list run-id test-id teststep-name state-in status-in comment logfile))))

(define (rmt:get-steps-for-test run-id test-id)
  (rmt:send-receive 'get-steps-for-test run-id (list run-id test-id)))

;;======================================================================
;;  T E S T   D A T A 
;;======================================================================

(define (rmt:read-test-data run-id test-id categorypatt #!key (work-area #f)) 
  (rmt:send-receive 'read-test-data run-id (list run-id test-id categorypatt)))
;;   (let ((tdb  (rmt:open-test-db-by-test-id run-id test-id work-area: work-area)))
;;     (if tdb
;; 	(tdb:read-test-data tdb test-id categorypatt)
;; 	'())))

(define (rmt:testmeta-add-record testname)
  (rmt:send-receive 'testmeta-add-record #f (list testname)))

(define (rmt:testmeta-get-record testname)
  (rmt:send-receive 'testmeta-get-record #f (list testname)))

(define (rmt:testmeta-update-field test-name fld val)
  (rmt:send-receive 'testmeta-update-field #f (list test-name fld val)))

(define (rmt:test-data-rollup run-id test-id status)
  (rmt:send-receive 'test-data-rollup run-id (list run-id test-id status)))

(define (rmt:csv->test-data run-id test-id csvdata)
  (rmt:send-receive 'csv->test-data run-id (list run-id test-id csvdata)))

;;======================================================================
;;  T A S K S
;;======================================================================

(define (rmt:tasks-find-task-queue-records target run-name test-patt state-patt action-patt)
  (rmt:send-receive 'find-task-queue-records #f (list target run-name test-patt state-patt action-patt)))

(define (rmt:tasks-add action owner target runname testpatt params)
  (rmt:send-receive 'tasks-add #f (list action owner target runname testpatt params)))

(define (rmt:tasks-set-state-given-param-key param-key new-state)
  (rmt:send-receive 'tasks-set-state-given-param-key #f (list  param-key new-state)))

(define (rmt:tasks-get-last target runname)
  (rmt:send-receive 'tasks-get-last #f (list target runname)))

;;======================================================================
;; A R C H I V E S
;;======================================================================

(define (rmt:archive-get-allocations  testname itempath dneeded)
  (rmt:send-receive 'archive-get-allocations #f (list testname itempath dneeded)))

(define (rmt:archive-register-block-name bdisk-id archive-path)
  (rmt:send-receive 'archive-register-block-name #f (list bdisk-id archive-path)))

(define (rmt:archive-allocate-testsuite/area-to-block block-id testsuite-name areakey)
  (rmt:send-receive 'archive-allocate-test-to-block #f (list  block-id testsuite-name areakey)))

(define (rmt:archive-register-disk bdisk-name bdisk-path df)
  (rmt:send-receive 'archive-register-disk #f (list bdisk-name bdisk-path df)))

(define (rmt:test-set-archive-block-id run-id test-id archive-block-id)
  (rmt:send-receive 'test-set-archive-block-id run-id (list run-id test-id archive-block-id)))

(define (rmt:test-get-archive-block-info archive-block-id)
  (rmt:send-receive 'test-get-archive-block-info #f (list archive-block-id)))