Megatest

;;
;; NB// Runs on the server as part of the server loop
;;
(define (api:process-request dbstruct $) ;; the $ is the request vars proc
  (set! *api-process-request-count* (+ *api-process-request-count* 1))
  (let* ((cmd     ($ 'cmd))
	 (paramsj ($ 'params))
         (key     ($ 'key)))   
	 (params  (db:string->obj paramsj transport: 'http)) ;; incoming data from the POST (or is it a GET?)
         (debug:print 0 *default-log-port* "cmd:" cmd " with params " params "key " key)
         (if (equal? key *server-id**)
           (let* ((resdat  (api:execute-requests dbstruct (vector cmd params))) ;; process the request, resdat = #( flag result )
	      (success (vector-ref resdat 0))
	      (res     (vector-ref resdat 1))) ;; (vector flag payload), get the payload, ignore the flag (why?)
             (debug:print 0 *default-log-port* "res:" res)
             (if (not success)
	        (debug:print 0 *default-log-port* "ERROR: success flag is #f for " cmd " with params " params))
    (if (> *api-process-request-count* *max-api-process-requests*)
	(set! *max-api-process-requests* *api-process-request-count*))
    (set! *api-process-request-count* (- *api-process-request-count* 1))
    ;; This can be here but needs controls to ensure it doesn't run more than every 4 seconds
    ;; (rmt:dat->json-str
    ;;  (if (or (string? res)
    ;;          (list?   res)
    ;;          (number? res)
    ;;          (boolean? res))
    ;;      res 
    ;;      (list "ERROR, not string, list, number or boolean" 1 cmd params res)))))
    (db:obj->string res transport: 'http))
    (begin
       (debug:print 0 *default-log-port*   "Login failed server-id mismatch: " server-signature ", " *server-id*) 
       (db:obj->string (conc "Login failed server-id mismatch: " server-signature ", " *server-id*) transport: 'http)))))

      ;; through them searching for a good one.
      ;;
      (let* ((server-dat (server:get-rand-best areapath)) ;; (server:get-first-best areapath))
	     (runremote  (or area-dat *runremote*)))
	(if (not server-dat) ;; no server found
	    (client:setup-http areapath remaining-tries: (- remaining-tries 1))
	    (let ((host  (cadr  server-dat))
		  (port  (caddr server-dat))
                  (server-id (caddr (cddr server-dat))))
	      (debug:print-info 4 *default-log-port* "client:setup server-dat=" server-dat ", remaining-tries=" remaining-tries)
	      (if (and (not area-dat)
		       (not *runremote*))
                  (begin       
		    (set! *runremote* (make-remote))
                    (let* ((server-info (remote-server-info *runremote*))) 
                      (if server-info
                        (begin
                          (remote-server-url-set! *runremote* (server:record->url server-info))
                          (remote-server-id-set! *runremote* (server:record->id server-info)))))))
	      (if (and host port server-id)
		  (let* ((start-res (case *transport-type*
				      ((http)(http-transport:client-connect host port server-id))))
			 (ping-res  (case *transport-type* 
				      ((http)(rmt:login-no-auto-client-setup start-res)))))
		    (if (and start-res
			     ping-res)
			(let ((runremote (or area-dat *runremote*))) ;; it might have been generated only a few statements ago
			  (remote-conndat-set! runremote start-res) ;; (hash-table-set! runremote run-id start-res)
			  (debug:print-info 2 *default-log-port* "connected to " (http-transport:server-dat-make-url start-res))

    (else "FAIL")))

(define (common:logpro-exit-code->test-status exit-code)
  (status-sym->string (common:logpro-exit-code->status-sym exit-code)))

(defstruct remote
  (hh-dat            (common:get-homehost)) ;; homehost record ( addr . hhflag )
  (server-url        #f) ;; (server:check-if-running *toppath*) #f))
  (server-id         #f)
  (server-info       (if *toppath* (server:check-if-running *toppath*)))
  (last-server-check 0)  ;; last time we checked to see if the server was alive
  (conndat           #f)
  (transport         *transport-type*)
  (server-timeout    (server:expiration-timeout))
  (force-server      #f)
  (ro-mode           #f)  
  (ro-mode-checked   #f)) ;; flag that indicates we have checked for ro-mode

			       flush
			       sync
			       set-verbosity
			       killserver
			       ))

(define (db:login dbstruct calling-path calling-version client-signature)
   (cond 
   ((not (equal? calling-path *toppath*))
    (list #f "Login failed due to mismatch paths: " calling-path ", " *toppath*))
   ;; ((not (equal? *run-id* run-id))
   ;;  (list #f "Login failed due to mismatch run-id: " run-id ", " *run-id*))
   ((not (equal? megatest-version calling-version))
    (list #t (conc "Login warning due to mismatch megatest version: " calling-version ", " megatest-version)))
   
    (else
    (hash-table-set! *logged-in-clients* client-signature (current-seconds))
    '(#t "successful login"))))

(define (db:general-call dbstruct stmtname params)
  (let ((query (let ((q (alist-ref (if (string? stmtname)
				       (string->symbol stmtname)
				       stmtname)

				 ;;    	 (iup:attribute-set! servers-matrix (conc "0:" colnum) colname)
				 ;;    	 (set! colnum (+ 1 colnum)))
				 ;;           colnames)
				 (set! rownum 1)
				 (for-each 
				  (lambda (server)
				    (set! colnum 0)
				    (match-let (((mod-time host port start-time server-id pid)
						 server))
				      (let* ((uptime  (- (current-seconds) mod-time))
					     (runtime (if start-time
							  (- mod-time start-time)
							  0))
					     (vals (list "-"  ;; (vector-ref server 0) ;; Id
							 "-"  ;; (vector-ref server 9) ;; MT-Ver

			 (http-transport:server-dat-get-api-req serverdat)
			 (begin
			   (debug:print 0 *default-log-port* "FATAL ERROR: http-transport:client-api-send-receive called with no server info")
			   (exit 1))))
	 (res        (vector #f "uninitialized"))
	 (success    #t)
	 (sparams    (db:obj->string params transport: 'http))
	 (runremote  (or area-dat *runremote*))
         (server-id   (if (vector? serverdat) 
                           (http-transport:server-dat-get-server-id serverdat)
                           (begin
			     (debug:print 0 *default-log-port* "FATAL ERROR: http-transport:client-api-send-receive called with no server info")
			     (exit 1)))))
       ;(debug:print-info 0 *default-log-port* "fullurl=" fullurl ", cmd=" cmd ", params=" params ", run-id=" run-id "\n runremote=" runremote " serverdat=" serverdat " server-id" server-id "current time:" (current-seconds) ) 
       ;(debug:print-info 0 *default-log-port* "cmd=" cmd " fullurl=" fullurl " server-id=" server-id " current time:" (current-seconds)) 

       ;; set up the http-client here
       (max-retry-attempts 1)
       ;; consider all requests indempotent
       (retry-request? (lambda (request)
			 #f))
       ;; send the data and get the response
       ;; extract the needed info from the http data and 
       ;; process and return it.
       (let* ((send-recieve (lambda ()
			      (mutex-lock! *http-mutex*)
			      ;; (condition-case (with-input-from-request "http://localhost"; #f read-lines)
			      ;;					       ((exn http client-error) e (print e)))
			      (set! res (vector                ;;; DON'T FORGET - THIS IS THE CLIENT SIDE! NOTE: consider moving this to client.scm since we are only supporting http transport at this time.
					 success
					 (db:string->obj 
					  (handle-exceptions
					      exn
					      (let ((call-chain (get-call-chain))
						    (msg        ((condition-property-accessor 'exn 'message) exn)))
						(set! success #f)
                                                (if (debug:debug-mode 3)
                                                    (debug:print-info 0 *default-log-port* "couldn't talk to server, trying again ...")
                                                    (begin
                                                      (debug:print 0 *default-log-port* "WARNING: failure in with-input-from-request to " fullurl ".")
                                                      (debug:print 0 *default-log-port* " message: " msg ", exn=" exn)
                                                      (debug:print 0 *default-log-port* " cmd: " cmd " params: " params " key:" (or server-id "thekey"))
                                                      (debug:print 0 *default-log-port* " call-chain: " call-chain)))
                                                (if runremote
						    (remote-conndat-set! runremote #f))
						;; Killing associated server to allow clean retry.")
						;; (tasks:kill-server-run-id run-id)  ;; better to kill the server in the logic that called this routine?
						(mutex-unlock! *http-mutex*)
					     ;;; (signal (make-composite-condition
					     ;;;          (make-property-condition 'commfail 'message "failed to connect to server")))
					     ;;; "communications failed"
						(db:obj->string #f))
					    (with-input-from-request ;; was dat
					     fullurl 
					     (list (cons 'key (or server-id "thekey"))
						   (cons 'cmd cmd)
						   (cons 'params sparams))
					     read-string))
					  transport: 'http)
                                         0)) ;; added this speculatively
			      ;; Shouldn't this be a call to the managed call-all-connections stuff above?
			      (close-all-connections!)
			      (mutex-unlock! *http-mutex*)
			      ))
	      (time-out     (lambda ()
			      (thread-sleep! 45)
			      (debug:print 0 *default-log-port* "WARNING: send-receive took more than 45 seconds!!")
			      #f))
	      (th1 (make-thread send-recieve "with-input-from-request"))
	      (th2 (make-thread time-out     "time out")))
	 (thread-start! th1)
	 (thread-start! th2)
	 (thread-join! th1)
          (vector-set! res 0 success)
	 (thread-terminate! th2)
	 (debug:print-info 0 *default-log-port* "got res=" res)
	 (if (vector? res)
	     (if (vector-ref res 0) ;; this is the first flag or the second flag?
		 res ;; this is the *inner* vector? seriously? why?
                 (if (debug:debug-mode 11)
                     (let ((call-chain (get-call-chain))) ;; note: this code also called in nmsg-transport - consider consolidating it
                       (print-call-chain (current-error-port))
                       (debug:print-error 11 *default-log-port* "error above occured at server, res=" res) ;; " message: " ((condition-property-accessor 'exn 'message) exn))

(define (make-http-transport:server-dat)(make-vector 6))
(define (http-transport:server-dat-get-iface         vec)    (vector-ref  vec 0))
(define (http-transport:server-dat-get-port          vec)    (vector-ref  vec 1))
(define (http-transport:server-dat-get-api-uri       vec)    (vector-ref  vec 2))
(define (http-transport:server-dat-get-api-url       vec)    (vector-ref  vec 3))
(define (http-transport:server-dat-get-api-req       vec)    (vector-ref  vec 4))
(define (http-transport:server-dat-get-last-access   vec)    (vector-ref  vec 5))
;(define (http-transport:server-dat-get-socket        vec)    (vector-ref  vec 6))
(define (http-transport:server-dat-get-server-id     vec)    (vector-ref  vec 6))

(define (http-transport:server-dat-make-url vec)
  (if (and (http-transport:server-dat-get-iface vec)
	   (http-transport:server-dat-get-port  vec))
      (conc "http://" 
	    (http-transport:server-dat-get-iface vec)
	    ":"
	    (http-transport:server-dat-get-port  vec))
      #f))

(define (http-transport:server-dat-update-last-access vec)
  (if (vector? vec)
      (vector-set! vec 5 (current-seconds))
      (begin
	(print-call-chain (current-error-port))
	(debug:print-error 0 *default-log-port* "call to http-transport:server-dat-update-last-access with non-vector!!"))))

;;
;; connect
;;
(define (http-transport:client-connect iface port server-id) 
  (let* ((api-url      (conc "http://" iface ":" port "/api"))
	 (api-uri      (uri-reference (conc "http://" iface ":" port "/api")))
	 (api-req      (make-request method: 'POST uri: api-uri))
	 (server-dat   (vector iface port api-uri api-url api-req (current-seconds) server-id)))
    server-dat))

;; run http-transport:keep-running in a parallel thread to monitor that the db is being 
;; used and to shutdown after sometime if it is not.
;;
(define (http-transport:keep-running) 
  ;; if none running or if > 20 seconds since 

      
      (if (not (equal? sdat (list iface port)))
	  (let ((new-iface (car sdat))
		(new-port  (cadr sdat)))
	    (debug:print-info 0 *default-log-port* "WARNING: interface changed, refreshing iface and port info")
	    (set! iface new-iface)
	    (set! port  new-port)
             (if (not *server-id*)
              (set! *server-id* (server:mk-signature)))
            (debug:print 0 *default-log-port* (current-seconds) (current-directory) (current-process-id) (argv))
	    (debug:print 0 *default-log-port* "SERVER STARTED: " iface ":" port " AT " (current-seconds) " server-id: " *server-id*)
	    (flush-output *default-log-port*)))
      
      ;; Transfer *db-last-access* to last-access to use in checking that we are still alive
      (mutex-lock! *heartbeat-mutex*)
      (set! last-access *db-last-access*)
      (mutex-unlock! *heartbeat-mutex*)
      
      (if (common:low-noise-print 120 (conc "server running on " iface ":" port))
	  (begin
             (if (not *server-id*)
              (set! *server-id* (server:mk-signature)))
            (debug:print 0 *default-log-port* (current-seconds) (current-directory) (current-process-id) (argv))   
	    (debug:print 0 *default-log-port* "SERVER STARTED: " iface ":" port " AT " (current-seconds) " server-id: " *server-id*)
	    (flush-output *default-log-port*)))
      (if (common:low-noise-print 60 "dbstats")
	  (begin
	    (debug:print 0 *default-log-port* "Server stats:")
	    (db:print-current-query-stats)))
      (let* ((hrs-since-start  (/ (- (current-seconds) server-start-time) 3600)))
	(cond

      (if out-file (close-output-port out-port))
      (exit) ;; yes, bending the rules here - need to exit since this is a utility
      ))

(if (args:get-arg "-ping")
    (let* ((server-id     (string->number (args:get-arg "-ping"))) ;; extract run-id (i.e. no ":"
	   (host:port     (args:get-arg "-ping")))
      (server:ping (or server-id host:port) #f do-exit: #t)))

;;======================================================================
;; Capture, save and manipulate environments
;;======================================================================

;; NOTE: Keep these above the section where the server or client code is setup

    ;; DOT INIT_RUNREMOTE; // leaving off - doesn't really add to the clarity
    ;; DOT MUTEXLOCK -> INIT_RUNREMOTE [label="no remote?"];
    ;; DOT INIT_RUNREMOTE -> MUTEXLOCK;
    ;; ensure we have a record for our connection for given area
    (if (not runremote)                   ;; can remove this one. should never get here.         
	(begin
	  (set! *runremote* (make-remote))
          (let* ((server-info (remote-server-info *runremote*))) 
            (if server-info
		(begin
			(remote-server-url-set! *runremote* (server:record->url server-info))
			(remote-server-id-set! *runremote* (server:record->id server-info)))))  
	  (set! runremote   *runremote*))) ;; new runremote will come from this on next iteration
    
    ;; DOT SET_HOMEHOST; // leaving off - doesn't really add to the clarity
    ;; DOT MUTEXLOCK -> SET_HOMEHOST [label="no homehost?"];
    ;; DOT SET_HOMEHOST -> MUTEXLOCK;
    ;; ensure we have a homehost record
    (if (not (pair? (remote-hh-dat runremote)))  ;; not on homehost

     ;;DOT CASE6 [label="init\nremote"];
     ;;DOT MUTEXLOCK -> CASE6 [label="on homehost,\nwrite query,\nhave server,\ncan't reach it"]; {rank=same "case 6" CASE6};
     ;;DOT CASE6 -> "rmt:send-receive";
     ;; on homehost and this is a write, we already have a server, but server has died
     ((and (cdr (remote-hh-dat runremote))           ;; on homehost
           (not (member cmd api:read-only-queries))  ;; this is a write
           (remote-server-url runremote)             ;; have a server
           (not (server:ping (remote-server-url runremote) (remote-server-id runremote))))  ;; server has died. NOTE: this is not a cheap call! Need better approach.
      (set! *runremote* (make-remote))
      (let* ((server-info (remote-server-info *runremote*))) 
            (if server-info
		(begin
		  (remote-server-url-set! *runremote* (server:record->url server-info))
                  (remote-server-id-set! *runremote* (server:record->id server-info)))))
      (remote-force-server-set! runremote (common:force-server?))
      (mutex-unlock! *rmt-mutex*)
      (debug:print-info 12 *default-log-port* "rmt:send-receive, case  6")
      (rmt:send-receive cmd rid params attemptnum: attemptnum))

     ;;DOT CASE7 [label="homehost\nwrite"];
     ;;DOT MUTEXLOCK -> CASE7 [label="server not required,\non homehost,\na write,\nhave a server"]; {rank=same "case 7" CASE7};

     ;;DOT CASE8 -> "rmt:open-qry-close-locally";
     ;;  on homehost, no server contact made and this is a write, passively start a server 
     ((and (not (remote-force-server runremote))     ;; honor forced use of server, i.e. server NOT required
	   (cdr (remote-hh-dat runremote))           ;; have homehost
           (not (remote-server-url runremote))       ;; no connection yet
	   (not (member cmd api:read-only-queries))) ;; not a read-only query
      (debug:print-info 12 *default-log-port* "rmt:send-receive, case  8")
      (let ((server-info  (server:check-if-running *toppath*))) ;; (server:read-dotserver->url *toppath*))) ;; (server:check-if-running *toppath*))) ;; Do NOT want to run server:check-if-running - very expensive to do for every write call
	(if server-info
	    (begin
              (remote-server-url-set! runremote (server:record->url server-info)) ;; the string can be consumed by the client setup if needed
              (remote-server-id-set! runremote (server:record->id server-info)))  
	    (if (common:force-server?)
		(server:start-and-wait *toppath*)
		(server:kind-run *toppath*)))
      (remote-force-server-set! runremote (common:force-server?))
      (mutex-unlock! *rmt-mutex*)
      (debug:print-info 12 *default-log-port* "rmt:send-receive, case  8.1")
      (rmt:open-qry-close-locally cmd 0 params)))

     ;;DOT CASE9 [label="force server\nnot on homehost"];
     ;;DOT MUTEXLOCK -> CASE9 [label="no connection\nand either require server\nor not on homehost"]; {rank=same "case 9" CASE9};
     ;;DOT CASE9 -> "start\nserver" -> "rmt:send-receive";
     ((or (and (remote-force-server runremote)              ;; we are forcing a server and don't yet have a connection to one
	       (not (remote-conndat runremote)))
	  (and (not (cdr (remote-hh-dat runremote)))        ;; not on a homehost 

	    
;; Generate a unique signature for this server
(define (server:mk-signature)
  (message-digest-string (md5-primitive) 
			 (with-output-to-string
			   (lambda ()
			     (write (list (current-directory)
                                          (current-process-id)
					  (argv)))))))

;; When using zmq this would send the message back (two step process)
;; with spiffy or rpc this simply returns the return data to be returned
;; 
(define (server:reply return-addr query-sig success/fail result)
  (debug:print-info 11 *default-log-port* "server:reply return-addr=" return-addr ", result=" result)

    (if (get-environment-variable "TARGETHOST")(unsetenv "TARGETHOST"))
    (thread-join! log-rotate)
    (pop-directory)))

;; given a path to a server log return: host port startseconds
;;
(define (server:logf-get-start-info logf)
  (let ((rx (regexp "^SERVER STARTED: (\\S+):(\\d+) AT ([\\d\\.]+) server-id: (\\S+)"))) ;; SERVER STARTED: host:port AT timesecs
    (handle-exceptions
	exn
      (begin
	(print "failed to get server info from " logf ", exn=" exn)
	(list #f #f #f #f)) ;; no idea what went wrong, call it a bad server
      (with-input-from-file
	  logf
	(lambda ()
	  (let loop ((inl  (read-line))
		     (lnum 0))
	    (if (not (eof-object? inl))
		(let ((mlst (string-match rx inl)))
		  (if (not mlst)
		      (if (< lnum 500) ;; give up if more than 500 lines of server log read
			  (loop (read-line)(+ lnum 1))
			  (list #f #f #f #f))
		      (let ((dat  (cdr mlst)))
			(list (car dat) ;; host
			      (string->number (cadr dat)) ;; port
			      (string->number (caddr dat))
                              (cadr (cddr dat))))))
		(list #f #f #f #f))))))))

;; get a list of servers with all relevant data
;; ( mod-time host port start-time pid )
;;
(define (server:get-list areapath #!key (limit #f))
  (let ((fname-rx    (regexp "^(|.*/)server-(\\d+)-(\\S+).log$"))
	(day-seconds (* 24 60 60)))

	      '()
	      (let loop ((hed  (car server-logs))
			 (tal  (cdr server-logs))
			 (res '()))
		(let* ((mod-time  (handle-exceptions
				   exn
				   (begin
				     (debug:print 0 *default-log-port* "failed to get modification time on " hed ", exn=" exn)
				     (current-seconds)) ;; 0
				   (file-modification-time hed))) ;; default to *very* old so log gets ignored if deleted
		       (down-time (- (current-seconds) mod-time))
		       (serv-dat  (if (or (< num-serv-logs 10)
				  	  (< down-time 900)) ;; day-seconds))
				      (server:logf-get-start-info hed)
				      '())) ;; don't waste time processing server files not touched in the 15 minutes if there are more than ten servers to look at

			  new-res)
		      (loop (car tal)(cdr tal) new-res)))))))))

(define (server:get-num-alive srvlst)
  (let ((num-alive 0))
    (for-each
     (lambda (server)
       (match-let (((mod-time host port start-time server-id pid)
		    server))
	 (let* ((uptime  (- (current-seconds) mod-time))
		(runtime (if start-time
			     (- mod-time start-time)
			     0)))
	   (if (< uptime 5)(set! num-alive (+ num-alive 1))))))
     srvlst)

    (if (and (list? srvrs)
	     (not (null? srvrs)))
	(let* ((len (length srvrs))
	       (idx (random len)))
	  (list-ref srvrs idx))
	#f)))

(define (server:record->id servr)
  (match-let (((mod-time host port start-time server-id pid)
	       servr))
    (if server-id
	server-id
	#f)))

(define (server:record->url servr)
  (match-let (((mod-time host port start-time server-id pid)
	       servr))
    (if (and host port)
	(conc host ":" port)
	#f)))

(define (server:get-client-signature) ;; BB> why is this proc named "get-"?  it returns nothing -- set! has not return value.
  (if *my-client-signature* *my-client-signature*

		  (common:simple-file-release-lock lock-file)))
	(hash-table-set! *server-kind-run* areapath (list (+ call-num 1)(current-seconds))))))

;; this one seems to be the general entry point
;;
(define (server:start-and-wait areapath #!key (timeout 60))
  (let ((give-up-time (+ (current-seconds) timeout)))
    (let loop ((server-info (server:check-if-running areapath))
	       (try-num    0))
      (if (or server-info
	      (> (current-seconds) give-up-time)) ;; server-url will be #f if no server available.
	  (server:record->url server-info)
	  (let ((num-ok (length (server:get-best (server:get-list areapath)))))
	    (if (and (> try-num 0)  ;; first time through simply wait a little while then try again
		     (< num-ok 1))  ;; if there are no decent candidates for servers then try starting a new one
		(server:kind-run areapath))
	    (thread-sleep! 5)
	    (loop (server:check-if-running areapath)
		  (+ try-num 1)))))))

(define server:try-running server:run) ;; there is no more per-run servers ;; REMOVE ME. BUG.

(define (server:get-num-servers #!key (numservers 2))
  (let ((ns (string->number
	     (or (configf:lookup *configdat* "server" "numservers") "notanumber"))))
    (or ns numservers)))

;; no longer care if multiple servers are started by accident. older servers will drop off in time.
;;
(define (server:check-if-running areapath) ;;  #!key (numservers "2"))
  (let* ((ns            (server:get-num-servers))
	 (servers       (server:get-best (server:get-list areapath))))
    (print "in server:check-if-running servers: " servers " ns: " ns)
    (if (or (and servers
		 (null? servers))
	    (not servers)
	    (and (list? servers)
		 (< (length servers) (random ns)))) ;; somewhere between 0 and numservers
        #f
        (let loop ((hed (car servers))
                   (tal (cdr servers)))
          (let ((res (server:check-server hed)))
            (if res
                hed
                (if (null? tal)
                    #f
                    (loop (car tal)(cdr tal)))))))))

;; ping the given server
;;
(define (server:check-server server-record)
  (let* ((server-url (server:record->url server-record))
         (server-id (server:record->id server-record)) 
         (res        (case *transport-type*
                       ((http)(server:ping server-url server-id))
                       ;; ((nmsg)(nmsg-transport:ping (tasks:hostinfo-get-interface server)
                       )))
    (if res
        server-url
	#f)))

(define (server:kill servr)
  (match-let (((mod-time hostname port start-time pid)
	       servr))
    (tasks:kill-server hostname pid)))

;; called in megatest.scm, host-port is string hostname:port
;;
;; NOTE: This is NOT called directly from clients as not all transports support a client running
;;       in the same process as the server.
;;
(define (server:ping host-port-in server-id #!key (do-exit #f))
  (let ((host:port (if (not host-port-in) ;; use read-dotserver to find
		       #f ;; (server:check-if-running *toppath*)
		;; (if (number? host-port-in) ;; we were handed a server-id
		;; 	   (let ((srec (tasks:get-server-by-id (db:delay-if-busy (tasks:open-db)) host-port-in)))
		;; 	     ;; (print "srec: " srec " host-port-in: " host-port-in)
		;; 	     (if srec
		;; 		 (conc (vector-ref srec 3) ":" (vector-ref srec 4))

	  (begin
	    (if host-port-in
		(debug:print 0 *default-log-port*  "ERROR: bad host:port"))
	    (if do-exit (exit 1))
	    #f)
	  (let* ((iface      (car host-port))
		 (port       (cadr host-port))
		 (server-dat (http-transport:client-connect iface port server-id))
		 (login-res  (rmt:login-no-auto-client-setup server-dat)))
	    (if (and (list? login-res)
		     (car login-res))
		(begin
		  ;; (print "LOGIN_OK")
		  (if do-exit (exit 0))
		  #t)