Megatest

	      (if (server:check-if-running areapath)
		  (client:setup areapath)
		  #f))))

(define *send-receive-mutex* (make-mutex)) ;; should have separate mutex per run-id

;; RA => e.g. usage (rmt:send-receive 'get-var #f (list varname))

;;
(define (rmt:send-receive cmd rid params #!key (attemptnum 1)(area-dat #f)) ;; start attemptnum at 1 so the modulo below works as expected

  (common:telemetry-log (conc "rmt:"(->string cmd))
                        payload: `((rid . ,rid)
                                   (params . ,params)))
                          
  
  ;;DOT digraph megatest_state_status {
  ;;DOT   ranksep=0;
  ;;DOT   // rankdir=LR;
  ;;DOT   node [shape="box"];
  ;;DOT "rmt:send-receive" -> MUTEXLOCK;
  ;;DOT { edge [style=invis];"case 1" -> "case 2" -> "case 3" -> "case 4" -> "case 5" -> "case 6" -> "case 7" -> "case 8" -> "case 9" -> "case 10" -> "case 11"; }
  ;; do all the prep locked under the rmt-mutex
  (mutex-lock! *rmt-mutex*)
  
  ;; 1. check if server is started IFF cmd is a write OR if we are not on the homehost, store in runremote
  ;; 2. check the age of the connections. refresh the connection if it is older than timeout-20 seconds.
  ;; 3. do the query, if on homehost use local access
  ;;
  (let* ((start-time    (current-seconds)) ;; snapshot time so all use cases get same value
         (areapath      *toppath*);; TODO - resolve from dbstruct to be compatible with multiple areas
	 (runremote     (or area-dat
			    *runremote*))
	 (readonly-mode (rmtmod:calc-ro-mode runremote *toppath*)))

    ;; DOT INIT_RUNREMOTE; // leaving off - doesn't really add to the clarity
    ;; DOT MUTEXLOCK -> INIT_RUNREMOTE [label="no remote?"];
    ;; DOT INIT_RUNREMOTE -> MUTEXLOCK;
    ;; ensure we have a record for our connection for given area
    (if (not runremote)                   ;; can remove this one. should never get here.         
	(begin
	  (set! *runremote* (make-remote))
	  (set! runremote   *runremote*))) ;; new runremote will come from this on next iteration
    
    ;; DOT SET_HOMEHOST; // leaving off - doesn't really add to the clarity
    ;; DOT MUTEXLOCK -> SET_HOMEHOST [label="no homehost?"];
    ;; DOT SET_HOMEHOST -> MUTEXLOCK;
    ;; ensure we have a homehost record
    (if (not (pair? (remote-hh-dat runremote)))  ;; not on homehost
	(thread-sleep! 0.1) ;; since we shouldn't get here, delay a little
	(remote-hh-dat-set! runremote (common:get-homehost)))
    
    ;;(print "BB> readonly-mode is "readonly-mode" dbfile is "dbfile)
    (cond
     ;;DOT EXIT;
     ;;DOT MUTEXLOCK -> EXIT [label="> 15 attempts"]; {rank=same "case 1" "EXIT" }
     ;; give up if more than 15 attempts
     ((> attemptnum 15)
      (debug:print 0 *default-log-port* "ERROR: 15 tries to start/connect to server. Giving up.")
      (exit 1))

     ;;DOT CASE2 [label="local\nreadonly\nquery"];
     ;;DOT MUTEXLOCK -> CASE2; {rank=same "case 2" CASE2}
     ;;DOT CASE2 -> "rmt:open-qry-close-locally";
     ;; readonly mode, read request-  handle it - case 2
     ((and readonly-mode
           (member cmd api:read-only-queries)) 
      (mutex-unlock! *rmt-mutex*)
      (debug:print-info 12 *default-log-port* "rmt:send-receive, case 2")
      (rmt:open-qry-close-locally cmd 0 params)
      )

     ;;DOT CASE3 [label="write in\nread-only mode"];
     ;;DOT MUTEXLOCK -> CASE3 [label="readonly\nmode?"]; {rank=same "case 3" CASE3}
     ;;DOT CASE3 -> "#f";
     ;; readonly mode, write request.  Do nothing, return #f
     (readonly-mode (extras-readonly-mode *rmt-mutex* *default-log-port* cmd params))

     ;; This block was for pre-emptively resetting the connection if there had been no communication for some time.
     ;; I don't think it adds any value. If the server is not there, just fail and start a new connection.
     ;; also, the expire-time calculation might not be correct. We want, time-since-last-server-access > (server:get-timeout)
     ;;
     ;;DOT CASE4 [label="reset\nconnection"];
     ;;DOT MUTEXLOCK -> CASE4 [label="have connection,\nlast_access > expire_time"]; {rank=same "case 4" CASE4}
     ;;DOT CASE4 -> "rmt:send-receive";
     ;; reset the connection if it has been unused too long
     ((and runremote
           (remote-conndat runremote)
	   (> (current-seconds) ;; if it has been more than server-timeout seconds since last contact, close this connection and start a new on
	      (+ (http-transport:server-dat-get-last-access (remote-conndat runremote))
		 (remote-server-timeout runremote))))
      (debug:print-info 0 *default-log-port* "Connection to " (remote-server-url runremote) " expired due to no accesses, forcing new connection.")
      (http-transport:close-connections area-dat: runremote)
      (remote-conndat-set! runremote #f) ;; invalidate the connection, thus forcing a new connection.
      (mutex-unlock! *rmt-mutex*)
      (rmt:send-receive cmd rid params attemptnum: attemptnum))
     
     ;;DOT CASE5 [label="local\nread"];
     ;;DOT MUTEXLOCK -> CASE5 [label="server not required,\non homehost,\nread-only query"]; {rank=same "case 5" CASE5};
     ;;DOT CASE5 -> "rmt:open-qry-close-locally";

     ;; on homehost and this is a read
     ((and (not (remote-force-server runremote)) ;; honor forced use of server, i.e. server NOT required
	   (cdr (remote-hh-dat runremote))       ;; on homehost
           (member cmd api:read-only-queries))   ;; this is a read
      (mutex-unlock! *rmt-mutex*)
      (debug:print-info 12 *default-log-port* "rmt:send-receive, case  5")
      (rmt:open-qry-close-locally cmd 0 params))

     ;;DOT CASE6 [label="init\nremote"];
     ;;DOT MUTEXLOCK -> CASE6 [label="on homehost,\nwrite query,\nhave server,\ncan't reach it"]; {rank=same "case 6" CASE6};
     ;;DOT CASE6 -> "rmt:send-receive";
     ;; on homehost and this is a write, we already have a server, but server has died
     ((and (cdr (remote-hh-dat runremote))           ;; on homehost
           (not (member cmd api:read-only-queries))  ;; this is a write
           (remote-server-url runremote)             ;; have a server
           (not (server:ping (remote-server-url runremote))))  ;; server has died. NOTE: this is not a cheap call! Need better approach.
      (set! *runremote* (make-remote))
      (remote-force-server-set! runremote (common:force-server?))
      (mutex-unlock! *rmt-mutex*)
      (debug:print-info 12 *default-log-port* "rmt:send-receive, case  6")
      (rmt:send-receive cmd rid params attemptnum: attemptnum))

     ;;DOT CASE7 [label="homehost\nwrite"];
     ;;DOT MUTEXLOCK -> CASE7 [label="server not required,\non homehost,\na write,\nhave a server"]; {rank=same "case 7" CASE7};
     ;;DOT CASE7 -> "rmt:open-qry-close-locally";
     ;; on homehost and this is a write, we already have a server
     ((and (not (remote-force-server runremote))     ;; honor forced use of server, i.e. server NOT required
	   (cdr (remote-hh-dat runremote))           ;; on homehost
           (not (member cmd api:read-only-queries))  ;; this is a write
           (remote-server-url runremote))            ;; have a server
      (mutex-unlock! *rmt-mutex*)
      (debug:print-info 12 *default-log-port* "rmt:send-receive, case  4.1")
      (rmt:open-qry-close-locally cmd 0 params))

     ;;DOT CASE8 [label="force\nserver"];
     ;;DOT MUTEXLOCK -> CASE8 [label="server not required,\nhave homehost info,\nno connection yet,\nnot a read-only query"]; {rank=same "case 8" CASE8};
     ;;DOT CASE8 -> "rmt:open-qry-close-locally";
     ;;  on homehost, no server contact made and this is a write, passively start a server 
     ((and (not (remote-force-server runremote))     ;; honor forced use of server, i.e. server NOT required
	   (cdr (remote-hh-dat runremote))           ;; have homehost
           (not (remote-server-url runremote))       ;; no connection yet
	   (not (member cmd api:read-only-queries))) ;; not a read-only query
      (debug:print-info 12 *default-log-port* "rmt:send-receive, case  8")
      (let ((server-url  (server:check-if-running *toppath*))) ;; (server:read-dotserver->url *toppath*))) ;; (server:check-if-running *toppath*))) ;; Do NOT want to run server:check-if-running - very expensive to do for every write call
	(if server-url
	    (remote-server-url-set! runremote server-url) ;; the string can be consumed by the client setup if needed
	    (if (common:force-server?)
		(server:start-and-wait *toppath*)
		(server:kind-run *toppath*))))
      (remote-force-server-set! runremote (common:force-server?))
      (mutex-unlock! *rmt-mutex*)
      (debug:print-info 12 *default-log-port* "rmt:send-receive, case  8.1")
      (rmt:open-qry-close-locally cmd 0 params))

     ;;DOT CASE9 [label="force server\nnot on homehost"];
     ;;DOT MUTEXLOCK -> CASE9 [label="no connection\nand either require server\nor not on homehost"]; {rank=same "case 9" CASE9};
     ;;DOT CASE9 -> "start\nserver" -> "rmt:send-receive";
     ((or (and (remote-force-server runremote)              ;; we are forcing a server and don't yet have a connection to one
	       (not (remote-conndat runremote)))
	  (and (not (cdr (remote-hh-dat runremote)))        ;; not on a homehost 
	       (not (remote-conndat runremote))))           ;; and no connection
      (debug:print-info 12 *default-log-port* "rmt:send-receive, case 9, hh-dat: " (remote-hh-dat runremote) " conndat: " (remote-conndat runremote))
      (mutex-unlock! *rmt-mutex*)
      (if (not (server:check-if-running *toppath*)) ;; who knows, maybe one has started up?
	  (server:start-and-wait *toppath*))
      (remote-conndat-set! runremote (rmt:get-connection-info *toppath*)) ;; calls client:setup which calls client:setup-http
      (rmt:send-receive cmd rid params attemptnum: attemptnum)) ;; TODO: add back-off timeout as

     ;;DOT CASE10 [label="on homehost"];
     ;;DOT MUTEXLOCK -> CASE10 [label="server not required,\non homehost"]; {rank=same "case 10" CASE10};
     ;;DOT CASE10 -> "rmt:open-qry-close-locally";
     ;; all set up if get this far, dispatch the query
     ((and (not (remote-force-server runremote))
	   (cdr (remote-hh-dat runremote))) ;; we are on homehost
      (mutex-unlock! *rmt-mutex*)
      (debug:print-info 12 *default-log-port* "rmt:send-receive, case 10")
      (rmt:open-qry-close-locally cmd (if rid rid 0) params))

     ;;DOT CASE11 [label="send_receive"];
     ;;DOT MUTEXLOCK -> CASE11 [label="else"]; {rank=same "case 11" CASE11};
     ;;DOT CASE11 -> "rmt:send-receive" [label="call failed"];
     ;;DOT CASE11 -> "RESULT" [label="call succeeded"];
     ;; not on homehost, do server query
     (else (extras-case-11 *default-log-port* runremote cmd params attemptnum)))))
    ;;DOT }

;; bunch of small functions factored out of send-receive to make debug easier
;;

(define (extras-case-11 *default-log-port* runremote cmd params attemptnum)
  ;; (mutex-unlock! *rmt-mutex*)
  (debug:print-info 12 *default-log-port* "rmt:send-receive, case  9")
  ;; (mutex-lock! *rmt-mutex*)
  (let* ((conninfo (remote-conndat runremote))
	 (dat      (case (remote-transport runremote)
		     ((http) (condition-case ;; handling here has
					     ;; caused a lot of
					     ;; problems. However it
					     ;; is needed to deal with
					     ;; attemtped
					     ;; communication to
					     ;; servers that have gone
					     ;; away
			      (http-transport:client-api-send-receive 0 conninfo cmd params)
			      ((commfail)(vector #f "communications fail"))
			      ((exn)(vector #f "other fail" (print-call-chain)))))
		     (else
		      (debug:print 0 *default-log-port* "ERROR: transport " (remote-transport runremote) " not supported")
		      (exit))))
	 (success  (if (vector? dat) (vector-ref dat 0) #f))
	 (res      (if (vector? dat) (vector-ref dat 1) #f)))
    (if (and (vector? conninfo) (< 5 (vector-length conninfo)))
	(http-transport:server-dat-update-last-access conninfo) ;; refresh access time
	(begin
	  (debug:print 0 *default-log-port* "INFO: Should not get here! conninfo=" conninfo)
	  (set! conninfo #f)
	  (remote-conndat-set! *runremote* #f) ;; NOTE: *runremote* is global copy of runremote. Purpose: factor out global.
	  (http-transport:close-connections  area-dat: runremote)))
    (debug:print-info 13 *default-log-port* "rmt:send-receive, case  9. conninfo=" conninfo " dat=" dat " runremote = " runremote)
    (mutex-unlock! *rmt-mutex*)
    (if success ;; success only tells us that the transport was
	;; successful, have to examine the data to see if
	;; there was a detected issue at the other end
	(extras-transport-succeded *default-log-port* *rmt-mutex* attemptnum runremote res)
	(extras-transport-failed *default-log-port* *rmt-mutex* attemptnum runremote cmd rid params)
	)))

;; (define (rmt:update-db-stats run-id rawcmd params duration)
;;   (mutex-lock! *db-stats-mutex*)
;;   (handle-exceptions
;;    exn
;;    (begin
;;      (debug:print 0 *default-log-port* "WARNING: stats collection failed in update-db-stats")
;;      (debug:print 0 *default-log-port* " message: " ((condition-property-accessor 'exn 'message) exn))
;;      (print "exn=" (condition->list exn))
;;      #f) ;; if this fails we don't care, it is just stats
;;    (let* ((cmd      (conc "run-id=" run-id " " (if (eq? rawcmd 'general-call) (car params) rawcmd)))
;; 	  (stat-vec (hash-table-ref/default *db-stats* cmd #f)))
;;      (if (not (vector? stat-vec))
;; 	 (let ((newvec (vector 0 0)))
;; 	   (hash-table-set! *db-stats* cmd newvec)
;; 	   (set! stat-vec newvec)))
;;      (vector-set! stat-vec 0 (+ (vector-ref stat-vec 0) 1))
;;      (vector-set! stat-vec 1 (+ (vector-ref stat-vec 1) duration))))
;;   (mutex-unlock! *db-stats-mutex*))

(define (rmt:print-db-stats)
  (let ((fmtstr "~40a~7-d~9-d~20,2-f")) ;; "~20,2-f"
    (debug:print 18 *default-log-port* "DB Stats\n========")
    (debug:print 18 *default-log-port* (format #f "~40a~8a~10a~10a" "Cmd" "Count" "TotTime" "Avg"))
    (for-each (lambda (cmd)
		(let ((cmd-dat (hash-table-ref *db-stats* cmd)))
		  (debug:print 18 *default-log-port* (format #f fmtstr cmd (vector-ref cmd-dat 0) (vector-ref cmd-dat 1) (/ (vector-ref cmd-dat 1)(vector-ref cmd-dat 0))))))

(define (rmt:test-get-archive-block-info archive-block-id)
  (rmt:send-receive 'test-get-archive-block-info #f (list archive-block-id)))

(set-functions rmt:send-receive                       remote-server-url-set!
	       http-transport:close-connections	      remote-conndat-set!
	       debug:print                            debug:print-info
	       remote-ro-mode                         remote-ro-mode-set!
	       remote-ro-mode-checked-set!            remote-ro-mode-checked)

(module rmtmod
	*
	
(import scheme chicken data-structures extras)
(import (prefix sqlite3 sqlite3:) posix typed-records srfi-18)
(import commonmod)


;; Hack to make these functions visible to the refactored code, goal is to eliminate these over time.

(define (rmt:send-receive . params) #f)
(define (http-transport:close-connections . params) #f)



;; from remote defstruct in common.scm
(define (remote-conndat-set! . params) #f)
(define (remote-server-url-set! . params) #f)
(define (remote-ro-mode . params) #f)
(define (remote-ro-mode-set! . params) #f)
(define (remote-ro-mode-checked-set! . params) #f)
(define (remote-ro-mode-checked . params) #f)




(define (debug:print . params) #f)
(define (debug:print-info . params) #f)

(define (set-functions send-receive        rsus
		       close-connections   rcs
		       dbgp                dbgpinfo
		       ro-mode             ro-mode-set
		       ro-mode-checked-set ro-mode-checked
		       ) 



  (set! rmt:send-receive                 send-receive)
  (set! remote-server-url-set!           rsus)
  (set! http-transport:close-connections close-connections)




  (set! remote-conndat-set!              rcs)
  (set! debug:print                      dbgp)
  (set! debug:print-info                 dbgpinfo)
  (set! remote-ro-mode                   ro-mode)
  (set! remote-ro-mode-set!              ro-mode-set)
  (set! remote-ro-mode-checked-set!      ro-mode-checked-set)
  (set! remote-ro-mode-checked           ro-mode-checked))





(define (rmtmod:calc-ro-mode runremote *toppath*)
  (if (and runremote
	   (remote-ro-mode-checked runremote))
      (remote-ro-mode runremote)
      (let* ((dbfile  (conc *toppath* "/megatest.db"))
	     (ro-mode (not (file-write-access? dbfile)))) ;; TODO: use dbstruct or runremote to figure this out in future

	(mutex-lock! *rmt-mutex*)
	(http-transport:close-connections area-dat: runremote)
	(set! *runremote* #f) ;; force starting over
	(mutex-unlock! *rmt-mutex*)
	(thread-sleep! wait-delay)
	(rmt:send-receive cmd rid params attemptnum: (+ attemptnum 1)))
      res)) ;; All good, return res






































)