Megatest

		(if (equal? sel-val val)
		    (iup:attribute-set! lb "VALUE" val-num))
		(set! val-num (+ val-num 1)))
	      values)
    (let ((val (iup:attribute lb "VALUE")))
      (if val
	  val
	  (if (not (null? values))
	      (let ((newval (car values)))
		(iup:attribute-set! lb "VALUE" newval)
		newval))))))

(define (dashboard:update-target-selector key-lbs #!key (action-proc #f))
  (let* ((db-target-dat (open-run-close db:get-targets #f))
	 (header        (vector-ref db-target-dat 0))
	 (db-targets    (vector-ref db-target-dat 1))
	 (key-listboxes (if key-lbs key-lbs (make-list (length header) #f))))
    (let loop ((key     (car header))

			       ;; substitute the TEST_SRC_PATH and TEST_TARG_PATH
			       (string-substitute "TEST_TARG_PATH" test-path
						  (string-substitute "TEST_SRC_PATH" test-src-path cmd #t) #t)
			       #f)))
		 (cmd    (if ovrcmd 
			     ovrcmd
			     (conc "rsync -av" (if (debug:debug-mode 1) "" "q") " " test-src-path "/ " test-path "/"
				   " >> " test-path "/mt_launch.log 2>> " test-path "/mt_launch.log")))
		 (status (system cmd)))
	    (if (not (eq? status 0))
		(debug:print 2 "ERROR: problem with running \"" cmd "\"")))
	  (list lnkpathf lnkpath ))
	(list #f #f))))

;; 1. look though disks list for disk with most space

;; Always use two digit decimal
;; 1.01, 1.02...1.10,1.11 ... 1.99,2.00..

(declare (unit megatest-version))

(define megatest-version 1.5418)

	(registery-mutex   (make-mutex))
	(num-retries        0)
	(max-retries       (config-lookup *configdat* "setup" "maxretries")))
    (set! max-retries (if (and max-retries (string->number max-retries))(string->number max-retries) 100))
    (if (not (null? sorted-test-names))
	(let loop ((hed         (car sorted-test-names))
		   (tal         (cdr sorted-test-names))
		   (registered  '())
		   (reruns      '()))
	  (if (not (null? reruns))(debug:print-info 4 "reruns=" reruns))
	  ;; (print "Top of loop, hed=" hed ", tal=" tal " ,reruns=" reruns)
	  (let* ((test-record (hash-table-ref test-records hed))
		 (test-name   (tests:testqueue-get-testname test-record))
		 (tconfig     (tests:testqueue-get-testconfig test-record))
		 (testmode    (let ((m (config-lookup tconfig "requirements" "mode")))

		 ;; Check item path against item-patts
		 ((not (tests:match test-patts (tests:testqueue-get-testname test-record) item-path)) ;; This test/itempath is not to be run
		  ;; else the run is stuck, temporarily or permanently
		  ;; but should check if it is due to lack of resources vs. prerequisites
		  (debug:print-info 1 "Skipping " (tests:testqueue-get-testname test-record) " " item-path " as it doesn't match " test-patts)
		  ;; (thread-sleep! *global-delta*)
		  (if (not (null? tal))
		      (loop (car tal)(cdr tal) registered reruns)))
		 ;; Registery has been started for this test but has not yet completed
		 ;; this should be rare, the case where there are only a couple of tests and the db is slow
		 ;; delay a short while and continue
		 ;; ((eq? (hash-table-ref/default test-registery (runs:make-full-test-name test-name item-path) #f) 'start)
		 ;;  (thread-sleep! 0.01)
		 ;;  (loop (car newtal)(cdr newtal) reruns))
		 ;; count number of 'done, if more than 100 then skip on through.

		 ;; ((< (length (filter (lambda (x)(eq? x 'done))(hash-table-values test-registery))) 100) ;; why get more than 200 ahead?
		 ;;  
		 ;; 
		 ;;  )
		 ((not (hash-table-ref/default test-registery (runs:make-full-test-name test-name item-path) #f)) ;; too many changes required. Implement later.
		  (debug:print-info 4 "Pre-registering test " test-name "/" item-path " to create placeholder" )
		  ;; NEED TO THREADIFY THIS
		  (let ((th (make-thread (lambda ()
		        		   (mutex-lock! registery-mutex)
		        		   (hash-table-set! test-registery (runs:make-full-test-name test-name item-path) 'start)
		        		   (mutex-unlock! registery-mutex)
					   ;; If haven't done it before register a top level test if this is an itemized test
					   (if (not (eq? (hash-table-ref/default test-registery (runs:make-full-test-name test-name "") #f) 'done))
					       (cdb:tests-register-test *runremote* run-id test-name ""))
					   (cdb:tests-register-test *runremote* run-id test-name item-path)
		        		   (mutex-lock! registery-mutex)
					   (hash-table-set! test-registery (runs:make-full-test-name test-name item-path) 'done)
		        		   (mutex-unlock! registery-mutex))
		        		 (conc test-name "/" item-path))))
		    (thread-start! th))
		  (thread-sleep! *global-delta*)
		  (runs:shrink-can-run-more-tests-delay)   ;; DELAY TWEAKER (still needed?)
		  (if (> (length (filter (lambda (x)(eq? x 'done))(hash-table-values test-registery))) 100) ;; start things running if have at least 100 queued up
		      (loop (car registered)(append (cdr registered)(list hed) tal) '() reruns)
		      (loop (car newtal)(cdr newtal) (append registered (list hed)) reruns)))
		 ;; At this point *all* test registrations must be completed.
		 ((not (null? (filter (lambda (x)(eq? 'start x))(hash-table-values test-registery))))
		  (debug:print-info 0 "Waiting on test registrations: " (string-intersperse 
									 (filter (lambda (x)
										   (eq? (hash-table-ref/default test-registery x #f) 'start))
										 (hash-table-keys test-registery))
									 ", "))
		  (thread-sleep! 0.1)
		  (loop hed tal registered reruns))
		 ((not have-resources) ;; simply try again after waiting a second
		  (debug:print-info 1 "no resources to run new tests, waiting ...")
		  ;; Have gone back and forth on this but db starvation is an issue.
		  ;; wait one second before looking again to run jobs.
		  (thread-sleep! 1) ;; (+ 2 *global-delta*))
		  ;; could have done hed tal here but doing car/cdr of newtal to rotate tests
		  (loop (car newtal)(cdr newtal) registered reruns))
		 ((and have-resources
		       (or (null? prereqs-not-met)
			   (and (eq? testmode 'toplevel)
				(null? non-completed))))
		  (run:test run-id runname keyvallst test-record flags #f)
		  (hash-table-set! test-registery (runs:make-full-test-name test-name item-path) 'running)
		  (runs:shrink-can-run-more-tests-delay)  ;; DELAY TWEAKER (still needed?)
		  ;; (thread-sleep! *global-delta*)
		  (if (not (null? tal))
		      (loop (car tal)(cdr tal) registered reruns)))
		 (else ;; must be we have unmet prerequisites
		    (debug:print 4 "FAILS: " fails)
		    ;; If one or more of the prereqs-not-met are FAIL then we can issue
		    ;; a message and drop hed from the items to be processed.
		    (if (null? fails)
			(begin
			  ;; couldn't run, take a breather
			  (debug:print-info 4 "Shouldn't really get here, race condition? Unable to launch more tests at this moment, killing time ...")
			  ;; (thread-sleep! (+ 0.01 *global-delta*)) ;; long sleep here - no resources, may as well be patient
			  ;; we made new tal by sticking hed at the back of the list
			  (loop (car newtal)(cdr newtal) registered reruns))
			;; the waiton is FAIL so no point in trying to run hed ever again
			(if (not (null? tal))
			    (if (vector? hed)
				(begin 
				  (debug:print 1 "WARN: Dropping test " (db:test-get-testname hed) "/" (db:test-get-item-path hed)
					       " from the launch list as it has prerequistes that are FAIL")
				  (runs:shrink-can-run-more-tests-delay) ;; DELAY TWEAKER (still needed?)
				  ;; (thread-sleep! *global-delta*)
				  (hash-table-set! test-registery (runs:make-full-test-name test-name item-path) 'removed)
				  (loop (car tal)(cdr tal) registered (cons hed reruns)))
				(begin
				  (debug:print 1 "WARN: Test not processed correctly. Could be a race condition in your test implementation? " hed) ;;  " as it has prerequistes that are FAIL. (NOTE: hed is not a vector)")
				  (runs:shrink-can-run-more-tests-delay) ;; DELAY TWEAKER (still needed?)
				  ;; (thread-sleep! (+ 0.01 *global-delta*))
				  (loop hed tal registered reruns))))))))) ;; END OF INNER COND
	     
	     ;; case where an items came in as a list been processed
	     ((and (list? items)     ;; thus we know our items are already calculated
		   (not   itemdat)) ;; and not yet expanded into the list of things to be done
	      (if (and (debug:debug-mode 1) ;; (>= *verbosity* 1)
		       (> (length items) 0)
		       (> (length (car items)) 0))

			 (hash-table-set! test-records newtestname new-test-record)
			 (set! tal (cons newtestname tal)))))) ;; since these are itemized create new test names testname/itempath
	       items)
	      (if (not (null? tal))
		  (begin
		    (debug:print-info 4 "End of items list, looping with next after short delay")
                    ;; (thread-sleep! (+ 0.01 *global-delta*))
		    (loop (car tal)(cdr tal) registered reruns))))

	     ;; if items is a proc then need to run items:get-items-from-config, get the list and loop 
	     ;;    - but only do that if resources exist to kick off the job
	     ((or (procedure? items)(eq? items 'have-procedure))
	      (let ((can-run-more    (runs:can-run-more-tests test-record)))
		(if (and (list? can-run-more)
			 (car can-run-more))

			  (setenv "MT_RUNNAME"   runname)
			  (set-megatest-env-vars run-id) ;; these may be needed by the launching process
			  (let ((items-list (items:get-items-from-config tconfig)))
			    (if (list? items-list)
				(begin
				  (tests:testqueue-set-items! test-record items-list)
				  ;; (thread-sleep! *global-delta*)
				  (loop hed tal registered reruns))
				(begin
				  (debug:print 0 "ERROR: The proc from reading the setup did not yield a list - please report this")
				  (exit 1))))))
		       ((null? fails)
			(debug:print-info 4 "fails is null, moving on in the queue but keeping " hed " for now")
			;; only increment num-retries when there are no tests runing
			(if (eq? 0 (list-ref can-run-more 1))
			    (begin
			      (if (> num-retries 100) ;; first 100 retries are low time cost
				  (thread-sleep! (+ 2 *global-delta*))
				  (thread-sleep! (+ 0.01 *global-delta*)))
			      (set! num-retries (+ num-retries 1))))
			(if (> num-retries  max-retries)
			    (if (not (null? tal))
				(loop (car tal)(cdr tal) registered reruns))
			    (loop (car newtal)(cdr newtal) registered reruns))) ;; an issue with prereqs not yet met?
		       ((and (not (null? fails))(eq? testmode 'normal))
			(debug:print-info 1 "test "  hed " (mode=" testmode ") has failed prerequisite(s); "
				     (string-intersperse (map (lambda (t)(conc (db:test-get-testname t) ":" (db:test-get-state t)"/"(db:test-get-status t))) fails) ", ")
				     ", removing it from to-do list")
			(if (not (null? tal))
			    (begin
                              ;; (thread-sleep! *global-delta*)
			      (loop (car tal)(cdr tal) registered (cons hed reruns)))))
		       (else
			(debug:print 8 "ERROR: No handler for this condition.")
			(thread-sleep! (+ 1 *global-delta*))
			(loop (car newtal)(cdr newtal) registered reruns)))) ;; END OF IF CAN RUN MORE

		    ;; if can't run more just loop with next possible test
		    (begin
		      (debug:print-info 4 "processing the case with a lambda for items or 'have-procedure. Moving through the queue without dropping " hed)
		      ;; (thread-sleep! (+ 2 *global-delta*))
		      (loop (car newtal)(cdr newtal) registered reruns))))) ;; END OF (or (procedure? items)(eq? items 'have-procedure))
	     
	     ;; this case should not happen, added to help catch any bugs
	     ((and (list? items) itemdat)
	      (debug:print 0 "ERROR: Should not have a list of items in a test and the itemspath set - please report this")
	      (exit 1))
	     ((not (null? reruns))
	      (let* ((newlst (tests:filter-non-runnable run-id tal test-records)) ;; i.e. not FAIL, WAIVED, INCOMPLETE, PASS, KILLED,
		     (junked (lset-difference equal? tal newlst)))
		(debug:print-info 4 "full drop through, if reruns is less than 100 we will force retry them, reruns=" reruns ", tal=" tal)
		(if (< num-retries max-retries)
		    (set! newlst (append reruns newlst)))
		(set! num-retries (+ num-retries 1))
		;; (thread-sleep! (+ 1 *global-delta*))
		(if (not (null? newlst))
		    ;; since reruns have been tacked on to newlst create new reruns from junked
		    (loop (car newlst)(cdr newlst) registered (delete-duplicates junked)))))
	     ((not (null? tal))
	      (debug:print-info 4 "I'm pretty sure I shouldn't get here."))
	     (else
	      (debug:print-info 4 "Exiting loop with...\n  hed=" hed "\n  tal=" tal "\n  reruns=" reruns))
	     )))) ;; LET* ((test-record

    ;; we get here on "drop through" - loop for next test in queue

# Add additional steps here. Format is "stepname script"
[ezsteps]
step1 step1.sh

# Test requirements are specified here
[requirements]
# waiton setup
priority 0

# Iteration for your tests are controlled by the items section
[items]
NUMBER #{scheme (string-intersperse (map number->string (sort (let loop ((a 0)(res '()))(if (< a 4500)(loop (+ a 1)(cons a res)) res)) >)) " ")}

# test_meta is a section for storing additional data on your test
[test_meta]
author matt
owner  matt
description An example test
tags tagone,tagtwo

# launchwait yes


# It is possible (but not recommended) to override the rsync command used
# to populate the test directories. For test development the following 
# example can be useful
#
# testcopycmd cp --remove-destination -rsv TEST_SRC_PATH/. TEST_TARG_PATH/. >> TEST_TARG_PATH/mt_launch.log 2>> TEST_TARG_PATH/mt_launch.log

# or for hard links

# testcopycmd cp --remove-destination -rlv TEST_SRC_PATH/. TEST_TARG_PATH/.

# FULL or 2, NORMAL or 1, OFF or 0
synchronous OFF