Megatest

# make install CSCOPTS='-accumulate-profile -profile-name $(PWD)/profile-ww$(shell date +%V.%u)'
# rm <files>.o ; make install CSCOPTS='-profile' ; ... ;  chicken-profile | less

PREFIX=$(PWD)
CSCOPTS=-O4
INSTALL=install
SRCFILES = common.scm items.scm launch.scm \
   ods.scm runconfig.scm server.scm configf.scm \
   db.scm keys.scm margs.scm megatest-version.scm \
   process.scm runs.scm tasks.scm tests.scm genexample.scm \
   http-transport.scm filedb.scm \
   client.scm synchash.scm daemon.scm mt.scm \

                 exn
                 #f
                 (delete-file fullname)))))))
   '()
   "logs"))

;; Force a megatest cleanup-db if version is changed and skip-version-check not specified
;; Do NOT check if not on homehost!
;;
(define (common:exit-on-version-changed)

  (if (common:on-homehost?)
      (if (common:version-changed?)
	  (let* ((mtconf (conc (get-environment-variable "MT_RUN_AREA_HOME") "/megatest.config"))
                (dbfile (conc (get-environment-variable "MT_RUN_AREA_HOME") "/megatest.db"))
                (read-only (not (file-write-access? dbfile)))
                (dbstruct (db:setup)))
	    (debug:print 0 *default-log-port*
			 "WARNING: Version mismatch!\n"
			 "   expected: " (common:version-signature) "\n"

              (debug:print 0 *default-log-port* "   You do not own megatest.db in this area.  Cannot proceed with megatest version migration.")
              (exit 1))
             (read-only
              (debug:print 0 *default-log-port* "   You have read-only access to this area.  Cannot proceed with megatest version migration.")
              (exit 1))
             (else
              (debug:print 0 *default-log-port* " to switch versions you can run: \"megatest -cleanup-db\"")
              (exit 1)))))
      (begin
	(debug:print 0 *default-log-port* "ERROR: cannot migrate version unless on homehost. Exiting.")
	(exit 1))))

;;======================================================================
;; S P A R S E   A R R A Y S
;;======================================================================

(define (make-sparse-array)
  (let ((a (make-sparse-vector)))

(define (assoc/default key lst . default)
  (let ((res (assoc key lst)))
    (if res (cadr res)(if (null? default) #f (car default)))))

(define (common:get-testsuite-name)
  (or (configf:lookup *configdat* "setup" "testsuite" )
      (if (string? *toppath* )
          (pathname-file *toppath*)
          (pathname-file (current-directory)))))

(define (common:get-db-tmp-area)
  (if *db-cache-path*
      *db-cache-path*
      (if *toppath*
	  (let ((dbpath (create-directory (conc "/tmp/" (current-user-name)
						"/megatest_localdb/"
						(common:get-testsuite-name) "/"
						(string-translate *toppath* "/" ".")) #t)))
	    (set! *db-cache-path* dbpath)
	    dbpath)
	  #f)))

(define (common:get-area-path-signature)
  (message-digest-string (md5-primitive) *toppath*))

;;======================================================================
;; E X I T   H A N D L I N G
;;======================================================================

			(delay-loop (+ count 1))))
		  (if (not *time-to-exit*) (loop))))
	    (if (common:low-noise-print 30)
		(debug:print-info 0 *default-log-port* "Exiting watchdog timer, *time-to-exit* = " *time-to-exit*" pid="(current-process-id)" this-wd-num="this-wd-num)))))))

;; TODO: for multiple areas, we will have multiple watchdogs; and multiple threads to manage
(define (common:watchdog)

  (debug:print-info 13 *default-log-port* "common:watchdog entered.")
  (if (common:on-homehost?)
      (let ((dbstruct (db:setup)))
	(debug:print-info 13 *default-log-port* "after db:setup with dbstruct="dbstruct)
	(cond
	 ((dbr:dbstruct-read-only dbstruct)
	  (debug:print-info 13 *default-log-port* "loading read-only watchdog")
	  (common:readonly-watchdog dbstruct))
	 (else
	  (debug:print-info 13 *default-log-port* "loading writable-watchdog.")
	  (common:writable-watchdog dbstruct)))
	(debug:print-info 13 *default-log-port* "watchdog done."))

      (debug:print-info 13 *default-log-port* "no need for watchdog on non-homehost")))


(define (std-exit-procedure)
  (on-exit (lambda () 0))
  ;;(debug:print-info 13 *default-log-port* "std-exit-procedure called; *time-to-exit*="*time-to-exit*)
  (let ((no-hurry  (if *time-to-exit* ;; hurry up
		       #f

;;
(define (common:on-homehost?)
  (let ((hh (common:get-homehost)))
    (if hh
	(cdr hh)
	#f)))

;; do we honor the caches of the config files?
;;
(define (common:use-cache?)
  (not (or (args:get-arg "-no-cache")
	   (and *configdat*
		(equal? (configf:lookup *configdat* "setup" "use-cache") "no")))))

;;======================================================================
;; M I S C   L I S T S
;;======================================================================

;; items in lista are matched value and position in listb
;; return the remaining items in listb or #f
;;

      (exit)))

(if (args:get-arg "-h")
    (begin
      (print help)
      (exit)))





;; TODO: Move this inside (main)
;;
(if (not (launch:setup))
    (begin
      (print "Failed to find megatest.config, exiting") 
      (exit 1)))

(if (not (common:on-homehost?))
    (begin
      (debug:print 0 *default-log-port* "WARNING: Current policy requires running dashboard on homehost: " (common:get-homehost))))
    
;; RA => Might require revert for filters 
;; create a watch dog to move changes from lt/.db/*.db to megatest.db
;;
;;;(if (file-write-access? (conc *toppath* "/megatest.db"))
;;(debug:print-info 13 *default-log-port* "Before common:watchdog spawn")
(thread-start! (make-thread common:watchdog "Watchdog thread"))
;;(debug:print-info 13 *default-log-port* "After common:watchdog spawn")

	(mutex-unlock! *launch-setup-mutex*)
	*toppath*)
      (let ((res (launch:setup-body force: force areapath: areapath)))
	(mutex-unlock! *launch-setup-mutex*)
	res)))

(define (launch:setup-body #!key (force #f) (areapath #f))
  (let* ((use-cache (common:use-cache?))
	 (toppath  (or *toppath* areapath (getenv "MT_RUN_AREA_HOME"))) ;; preserve toppath
	 (runname  (common:args-get-runname))
	 (target   (common:args-get-target))
	 (linktree (common:get-linktree))
	 (sections (if target (list "default" target) #f)) ;; for runconfigs
	 (mtconfig (or (args:get-arg "-config") "megatest.config")) ;; allow overriding megatest.config 
	 (rundir   (if (and runname target linktree)(conc linktree "/" target "/" runname) #f))
	 (mtcachef (and rundir (conc rundir "/" ".megatest.cfg-"  megatest-version "-" megatest-fossil-hash)))

    ;; (print "runname: " runname " target: " target " mtcachef: " mtcachef " rccachef: " rccachef)
    (set! *toppath* toppath) ;; This is needed when we are running as a test using CMDINFO as a datasource
    (cond
     ;; data was read and cached and available in *configstatus*, toppath has already been set
     ((eq? *configstatus* 'fulldata)
      *toppath*)
     ;; if mtcachef exists just read it, however we need to assume toppath is available in $MT_RUN_AREA_HOME
     ((and mtcachef (file-exists? mtcachef) (get-environment-variable "MT_RUN_AREA_HOME") use-cache)
      (set! *configdat*    (configf:read-alist mtcachef))
      (set! *runconfigdat* (configf:read-alist rccachef))
      (set! *configinfo*   (list *configdat*  (get-environment-variable "MT_RUN_AREA_HOME")))
      (set! *configstatus* 'fulldata)
      (set! *toppath*      (get-environment-variable "MT_RUN_AREA_HOME"))
      *toppath*)
     ;; we have all the info needed to fully process runconfigs and megatest.config

	     (directory-exists? *toppath*))
	(begin
	  (setenv "MT_RUN_AREA_HOME" *toppath*)
	  (setenv "MT_TESTSUITENAME" (common:get-testsuite-name)))
	(begin
	  (debug:print-error 0 *default-log-port* "failed to find the top path to your Megatest area.")
          ;;(exit 1)
	  (set! *toppath* #f) ;; force it to be false so we return #f
          #f
          ))
    *toppath*))

(define (get-best-disk confdat testconfig)
  (let* ((disks   (or (and testconfig (hash-table-ref/default testconfig "disks" #f))
		      (hash-table-ref/default confdat "disks" #f)))

  -rerun-all              : set all tests to NOT_STARTED,n/a and run with -preclean
  -lock                   : lock run specified by target and runname
  -unlock                 : unlock run specified by target and runname
  -set-run-status status  : sets status for run to status, requires -target and -runname
  -get-run-status         : gets status for run specified by target and runname
  -run-wait               : wait on run specified by target and runname
  -preclean               : remove the existing test directory before running the test
  -clean-cache            : remove the cached megatest.config and runconfigs.config files
  -no-cache               : do not use the cached config files. 

Selectors (e.g. use for -runtests, -remove-runs, -set-state-status, -list-runs etc.)
  -target key1/key2/...   : run for key1, key2, etc.
  -reqtarg key1/key2/...  : run for key1, key2, etc. but key1/key2 must be in runconfigs
  -testpatt patt1/patt2,patt3/...  : % is wildcard
  -runname                : required, name for this particular test run
  -state                  : Applies to runs, tests or steps depending on context
  -status                 : Applies to runs, tests or steps depending on context
  --modepatt key          : load testpatt from <key> in runconfigs instead of default TESTPATT if -testpatt and -tagexpr are not specified
  -tagexpr tag1,tag2%,..  : select tests with tags matching expression

# Get test path, use '.' to get a single path or a specific path/file pattern
megatest -test-files 'logs/*.log' -target ubuntu/n%/no% -runname w49% -testpatt test_mt%

Called as " (string-intersperse (argv) " ") "
Version " megatest-version ", built from " megatest-fossil-hash ))

;;  -gui                    : start a gui interface
;;  -config fname           : override the runconfigs file with fname

;; process args
(define remargs (args:get-args 
		 (argv)
		 (list  "-runtests"  ;; run a specific test
			"-config"    ;; override the config file name
			"-execute"   ;; run the command encoded in the base64 parameter

			"-summarize-items"
		        "-gui"
			"-daemonize"
			"-preclean"
			"-rerun-clean"
			"-rerun-all"
			"-clean-cache"
			"-no-cache"
			"-cache-db"
                        "-use-db-cache"
			;; misc
			"-repl"
			"-lock"
			"-unlock"
			"-list-servers"

  (let* ((rundir (if (and (getenv "MT_LINKTREE")(getenv "MT_TARGET")(getenv "MT_RUNNAME"))
		     (conc (getenv "MT_LINKTREE") "/" (getenv "MT_TARGET") "/" (getenv "MT_RUNNAME"))
		     #f))
	 (cfgf   (if rundir (conc rundir "/.runconfig." megatest-version "-" megatest-fossil-hash) #f)))
    (if (and cfgf
	     (file-exists? cfgf)
	     (file-write-access? cfgf)
	     (common:use-cache?))
	(configf:read-alist cfgf)
	(let* ((keys   (rmt:get-keys))
	       (target (common:args-get-target))
	       (key-vals (if target (keys:target->keyval keys target) #f))
	       (sections (if target (list "default" target) #f))
	       (data     (begin
			   (setenv "MT_RUN_AREA_HOME" *toppath*)

			 change-env)
		    (safe-setenv envvar val))
		(hash-table-set! finaldat envvar val)))
	      (map car section-dat)))))
     sections)
    (if already-seen
	(begin
	  (debug:print 2 *default-log-port* "Key settings found in runconfigs.config:")
	  (for-each (lambda (fullkey)
		      (debug:print 2 *default-log-port* (format #f "~20a ~a\n" fullkey (hash-table-ref/default whatfound fullkey 0))))
		    sections)
	  (debug:print 2 *default-log-port* "---")
	  (set! *already-seen-runconfig-info* #t)))
    ;; finaldat ;; was returning this "finaldat" which would be good but conflicts with other uses
    confdat

;; if .testconfig exists in test directory read and return it
;; else if have cached copy in *testconfigs* return it IFF there is a section "have fulldata"
;; else read the testconfig file
;;   if have path to test directory save the config as .testconfig and return it
;;
(define (tests:get-testconfig test-name item-path test-registry system-allowed #!key (force-create #f))
  (let* ((use-cache    (common:use-cache?))
	 (cache-path   (tests:get-test-path-from-environment))
	 (cache-file   (and cache-path (conc cache-path "/.testconfig")))
	 (cache-exists (and cache-file
			    (not force-create)  ;; if force-create then pretend there is no cache to read
			    (file-exists? cache-file)))
	 (cached-dat   (if (and (not force-create)
				cache-exists
				use-cache)
			   (handle-exceptions
			    exn
			    #f ;; any issues, just give up with the cached version and re-read
			    (configf:read-alist cache-file))
			   #f))
         (test-full-name (if (and item-path (not (string-null? item-path)))
                             (conc test-name "/" item-path)

[setup]
testcopycmd cp --remove-destination -rlv TEST_SRC_PATH/. TEST_TARG_PATH/. >> TEST_TARG_PATH/mt_launch.log 2>> TEST_TARG_PATH/mt_launch.log
# launchwait no
launch-delay 0

[server]
runtime 180

# All these are overridden in ../fdk.config
# [jobtools]
# launcher nbfake
# launcher bsub -q priority -o $MT_TEST_RUN_DIR/openlava.log 

[include ../fdk.config]

#!/bin/bash

# (cd ../../..;make && make install) || exit 1
# export PATH=$PWD/../../../bin:$PATH

for i in a b c d e f;do
  # g h i j k l m n o p q r s t u v w x y z;do
  viewscreen megatest -run -testpatt % -target a/b -runname w$(date +%U.%u.%H)$i
done

echo "" > num-running.log
while true; do
  foo=$(megatest -list-runs % | grep RUNNING | wc -l)
  echo "Num running at `date` $foo"
  echo "$foo at `date`" >> num-running.log

  sleep 10
done

[archive-disks]

# Archives will be organised under these paths like this:
#  <testsuite>/<creationdate>
# Within the archive the data is structured like this:
#  <target>/<runname>/<test>/
disk0 /tmp/#{getenv USER}/adisk1
disk1 /mfs/tmp/archive

# Uncomment these to emulate a job queue with a long time (look in bin/sleeprunner for the time)
[jobtools]
launcher #{scheme (case (string->symbol (conc (getenv "datapath"))) \
                         ((none) "nbfake") \
                         ((openlava) "bsub -o $MT_LINKTREE/$MT_TARGET/$MT_RUNNAME.$MT_TESTNAME-$MT_ITEM_PATH.log") \
                         ((sleeprunner) "sleeprunner") \

[default]
SOMEVAR This should show up in SOMEVAR3
VARNOVAL
VARNOVAL_WITHSPACE
QUICK %

# target based getting of config file, look at afs.config and nfs.config
[include #{getenv fsname}.config]

[include #{getenv MT_RUN_AREA_HOME}/common_runconfigs.config]

# #{system echo 'VACKYVAR #{shell pwd}' > $MT_RUN_AREA_HOME/configs/$USER.config}

  (expect:required in "LogFileBody" = 1 "VARNOVAL"            #/VARNOVAL/)

[test_meta]
author matt
owner  bob
description This test runs a single ezstep which is expected to pass, no logpro file.

tags quick,first,single
reviewed 09/10/2011, by Matt

echo sudo apt-get install libssl-dev  uuid-dev
echo sudo apt-get install libmotif3 -OR- set KTYPE=26g4
echo
echo Set OPTION to std, currently OPTION=$OPTION
echo
echo Additionally, if you want mysql-client, you will need to make sure
echo mysql_config is in your path
echo for postgres to install dbi libpq-dev
echo
echo You are using PREFIX=$PREFIX
echo You are using proxy="$proxy"
echo 
echo "Set additional_libpath to help find gtk or other libraries, don't forget a leading :"

SYSTEM_TYPE=$(lsb_release -irs |tr ' ' '_' |tr '\n' '-')$(uname -i)-$OPTION
CHICKEN_VERSION=4.11.0
CHICKEN_BASEVER=4.11.0

# Set up variables
#
case $SYSTEM_TYPE in
Ubuntu-16.04-x86_64-std)
	KTYPE=32
	CDVER=5.10
	IUPVER=3.17
	IMVER=3.11
	CHICKEN_VERSION=4.12.0
	CHICKEN_BASEVER=4.12.0
	;;
Ubuntu-16.04-i686-std)
	KTYPE=32
	CDVER=5.10
	IUPVER=3.17
	IMVER=3.11
	;;

  echo Using KTYPE=$KTYPE
fi

# Put all the downloaded tar files in tgz
mkdir -p tgz

# http://code.call-cc.org/releases/4.8.0/chicken-4.8.0.5.tar.gz


chicken_targz=chicken-${CHICKEN_VERSION}.tar.gz
if ! [[ -e tgz/$chicken_targz ]]; then 
    wget http://code.call-cc.org/releases/${CHICKEN_BASEVER}/${chicken_targz}
    mv $chicken_targz tgz
fi 

BUILDHOME=$PWD