Megatest

# make install CSCOPTS='-accumulate-profile -profile-name $(PWD)/profile-ww$(shell date +%V.%u)'
PREFIX=$(PWD)
CSCOPTS= 
INSTALL=install
SRCFILES = common.scm items.scm launch.scm \
           ods.scm runconfig.scm server.scm configf.scm \
           db.scm keys.scm margs.scm megatest-version.scm \
           process.scm runs.scm tasks.scm tests.scm genexample.scm \
	   fs-transport.scm http-transport.scm \
           client.scm gutils.scm synchash.scm daemon.scm mt.scm dcommon.scm \
	   tree.scm ezsteps.scm lock-queue.scm sdb.scm

GUISRCF  = dashboard-tests.scm dashboard-guimonitor.scm 

OFILES   = $(SRCFILES:%.scm=%.o)
GOFILES  = $(GUISRCF:%.scm=%.o)

ADTLSCR=mt_laststep mt_runstep mt_ezstep

[87cbe68f31] 
[be405e8e2e]

# FROM andyjpg on #chicken

(let ((original-exit (exit-handler)))
  (exit-handler (lambda (#!optional (exit-code 0))
		  (printf "Preparing to exit...\n" exit-code)
		  (for-each (lambda (pid)
			      (printf "Sending signal/term to ~A\n" pid)

(define *env-vars-by-run-id* (make-hash-table))
(define *current-run-name*   #f)

;; Testconfig and runconfig caches. 
(define *testconfigs*       (make-hash-table)) ;; test-name => testconfig
(define *runconfigs*        (make-hash-table)) ;; target    => runconfig

;; This is a cache of pre-reqs met, don't re-calc in cases where called with same params less than
;; five seconds ago
(define *pre-reqs-met-cache* (make-hash-table))

(define (common:clear-caches)
  (set! *target*             (make-hash-table))
  (set! *keys*               (make-hash-table))
  (set! *keyvals*            (make-hash-table))
  (set! *toptest-paths*      (make-hash-table))
  (set! *test-paths*         (make-hash-table))
  (set! *test-ids*           (make-hash-table))

	  (if (> min 0)(conc min "m ")  "")
	  sec "s")))

(define (seconds->time-string sec)
  (time->string 
   (seconds->local-time sec) "%H:%M:%S"))

(define (seconds->work-week/day-time sec)
  (time->string
   (seconds->local-time sec) "ww%V.%u %H:%M"))

(define (seconds->work-week/day sec)
  (time->string
   (seconds->local-time sec) "ww%V.%u"))

(define (seconds->year-work-week/day sec)
  (time->string
   (seconds->local-time sec) "%yww%V.%w"))

(define (seconds->year-work-week/day-time sec)
  (time->string
   (seconds->local-time sec) "%yww%V.%w %H:%M"))

;;======================================================================
;; Colors
;;======================================================================
      
(define (common:name->iup-color name)
  (case (string->symbol (string-downcase name))

    (if targ
	(or (configf:lookup config targ var)
	    (configf:lookup config "default" var))
	(configf:lookup config "default" var))))

(define-inline (configf:read-line p ht allow-processing)
  (let loop ((inl (read-line p)))
    (let ((cont-line (and (string? inl)
			  (not (string-null? inl))
			  (equal? "\\" (string-take-right inl 1)))))
      (if cont-line ;; last character is \ 
	  (let ((nextl (read-line p)))
	    (if (not (eof-object? nextl))
		(loop (string-append (if cont-line 
					 (string-take inl (- (string-length inl) 1))
					 inl)
				     nextl))))
	  (if (and allow-processing 
		   (not (eq? allow-processing 'return-string)))
	      (configf:process-line inl ht)
	      inl)))))

;; read a config file, returns hash table of alists

;; read a config file, returns hash table of alists
;; adds to ht if given (must be #f otherwise)
;; envion-patt is a regex spec that identifies sections that will be eval'd
;; in the environment on the fly

			  (iup:label val ; #:expand "HORIZONTAL"
				     ))
			(list "Testname: "
			      "Item path: "
			      "Current state: "
			      "Current status: "
			      "Test comment: "
			      "Test id: "
			      "Test date: "))
		   (list (iup:label "" #:expand "VERTICAL"))))
    (apply iup:vbox  ; #:expand "YES"
	   (list 
	    (store-label "testname"
			 (iup:label (db:test-get-testname  testdat) #:expand "HORIZONTAL")
			 (lambda (testdat)(db:test-get-testname testdat)))
	    (store-label "item-path"

			 (lambda (testdat)
			   (db:test-get-comment testdat)))
	    (store-label "testid"
			 (iup:label "TestId                             "
				    #:expand "HORIZONTAL")
			 (lambda (testdat)
			   (db:test-get-id testdat)))
	    (store-label "testdate" 
			 (iup:label "TestDate                           "
				    #:expand "HORIZONTAL")
			 (lambda (testdat)
			   (seconds->work-week/day-time (db:test-get-event_time testdat))))
	    )))))

;;======================================================================
;; Test meta panel
;;======================================================================

(define (test-meta-panel-get-description testmeta)

	    )))))


;;======================================================================
;; Run info panel
;;======================================================================
(define (run-info-panel keydat testdat runname)
  (let* ((run-id     (db:test-get-run_id testdat))
	 (rundat     (cdb:remote-run db:get-run-info #f run-id))
	 (header     (db:get-header rundat))
	 (event_time (db:get-value-by-header (db:get-row rundat)
					     (db:get-header rundat)
					     "event_time")))
    (iup:frame 
     #:title "Megatest Run Info" ; #:expand "YES"
     (iup:hbox ; #:expand "YES"
      (apply iup:vbox ; #:expand "YES"
	     (append (map (lambda (keyval)
			    (iup:label (conc (car keyval) " ")))

			  keydat)
		     (list (iup:label "runname ")
			   (iup:label "run-id")
			   (iup:label "run-date"))))
      (apply iup:vbox
	     (append (map (lambda (keyval)
			    (iup:label (cadr keyval) #:expand "HORIZONTAL"))
			  keydat)
		     (list (iup:label runname)
			   (iup:label (conc run-id))
			   (iup:label (seconds->year-work-week/day-time event_time))
			   (iup:label "" #:expand "VERTICAL"))))))))
  
;;======================================================================
;; Host info panel
;;======================================================================
(define (host-info-panel testdat store-label)
  (iup:frame
   #:title "Remote host and Test Run Info" ; #:expand "YES"

	       (refreshdat (lambda ()
			     (let* ((curr-mod-time (max (file-modification-time db-path)
							(if (file-exists? testdat-path)
							    (file-modification-time testdat-path)
							    (begin
							      (set! testdat-path (conc rundir "/testdat.db"))
							      0))))
				    (need-update   (or (and (> curr-mod-time db-mod-time)
							    (> (current-milliseconds)(+ last-update 250))) ;; every half seconds if db touched
						       (> (current-milliseconds)(+ last-update 10000))     ;; force update even 10 seconds
						       request-update))
				    (newtestdat (if need-update 
						    ;; NOTE: BUG HIDER, try to eliminate this exception handler
						    (handle-exceptions
						     exn 
						     (debug:print-info 0 "WARNING: test db access issue for test " test-id ": " ((condition-property-accessor 'exn 'message) exn))
						     (make-db:test)
						     (let* ((newdat (open-run-close db:get-test-info-by-id db test-id ))
							    (tstdat (if newdat
									(open-run-close tests:testdat-get-testinfo db test-id #f)
									'())))
						       (if (and newdat 
								(not (null? tstdat))) ;; (update-time cpuload diskfree run-duration)
							   (let* ((rec      (car tstdat))
								  (cpuload  (vector-ref rec 1))
								  (diskfree (vector-ref rec 2))
								  (run-dur  (vector-ref rec 3)))
							     (db:test-set-run_duration! newdat run-dur)
							     (db:test-set-diskfree!     newdat diskfree)
							     (db:test-set-cpuload!      newdat cpuload)))
						       ;; (debug:print 0 "newdat=" newdat)
						       newdat)
						     )
						    #f)))
			       ;; (debug:print 0 "newtestdat=" newtestdat)
			       (cond
				((and need-update newtestdat)
				 (set! testdat newtestdat)
				 (set! teststeps    (db:get-compressed-steps test-id work-area: rundir))
				 (set! logfile      (conc (db:test-get-rundir testdat) "/" (db:test-get-final_logf testdat)))
				 (set! rundir       (db:test-get-rundir testdat))
				 (set! testfullname (db:test-get-fullname testdat))
				 ;; (debug:print 0 "INFO: teststeps=" (intersperse teststeps "\n    "))
				 
				 ;; I don't see why this was implemented this way. Please comment it ...
				 ;; (if (eq? curr-mod-time db-mod-time) ;; do only once if same
				 ;;     (set! db-mod-time (+ curr-mod-time 1))
				 ;;     (set! db-mod-time curr-mod-time))

				 (if (not (eq? curr-mod-time db-mod-time))
				     (set! db-mod-time curr-mod-time))
				 (set! last-update (current-milliseconds))
				 (set! request-update #f) ;; met the need ...
				 )
				(need-update ;; if this was true and yet there is no data ....
				 (db:test-set-testname! testdat "DEAD OR DELETED TEST")))
			       (if need-update

    ;; trim runs to only those that are changing often here
    ;; 
    (for-each (lambda (run)
		(let* ((run-id      (db:get-value-by-header run header "id"))
		       (tests       (mt:get-tests-for-run run-id testnamepatt states statuses
							  not-in: *hide-not-hide*
							  sort-by: sort-by
							  sort-order: sort-order
							  qryvals: 'shortlist))
		       ;; NOTE: bubble-up also sets the global *all-item-test-names*
		       ;; (tests       (bubble-up tmptests priority: bubble-type))
		       (key-vals    (cdb:remote-run db:get-key-vals #f run-id)))
		  ;; NOTE: 11/01/2013 This routine is *NOT* getting called excessively.
		  ;; (debug:print 0 "Getting data for run " run-id " with key-vals=" key-vals)
		  ;; Not sure this is needed?
		  (set! referenced-run-ids (cons run-id referenced-run-ids))
		  (if (> (length tests) maxtests)
		      (set! maxtests (length tests)))
		  (if (or (not *hide-empty-runs*) ;; this reduces the data burden when set
			  (not (null? tests)))
		      (let ((dstruct (vector run tests key-vals)))

					     (vector -1 -1 "" "" "" 0 "" "" 0 "" "" "" 0 "" "")
					     (car matching))))
			   (testname   (db:test-get-testname  test))
			   (itempath   (db:test-get-item-path test))
			   (testfullname (test:test-get-fullname test))
			   (teststatus (db:test-get-status   test))
			   (teststate  (db:test-get-state    test))
			   ;;(teststart  (db:test-get-event_time test))
			   (runtime    (db:test-get-run_duration test))
			   (buttontxt  (if (equal? teststate "COMPLETED") teststatus teststate))
			   (button     (vector-ref columndat rown))
			   (color      (car (gutils:get-color-for-state-status teststate teststatus)))
			   (curr-color (vector-ref buttondat 1)) ;; (iup:attribute button "BGCOLOR"))
			   (curr-title (vector-ref buttondat 2))) ;; (iup:attribute button "TITLE")))
		      (if (not (equal? curr-color color))

	 (handler   (make-busy-timeout (if (args:get-arg "-override-timeout")
					   (string->number (args:get-arg "-override-timeout"))
					   136000)))) ;; 136000))) ;; 136000 = 2.2 minutes
    (if (and dbexists
	     (not write-access))
	(set! *db-write-access* write-access)) ;; only unset so other db's also can use this control
    (debug:print-info 11 "open-db, dbpath=" dbpath " argv=" (argv))
    (if write-access (sqlite3:set-busy-handler! db handler))
    (if (not dbexists)
	(db:initialize db))
    ;; Moving db:set-sync to a call in run.scm - it is a persistent value and only needs to be set once
    ;; (db:set-sync db)
    db))

;; keeping it around for debugging purposes only
(define (open-run-close-no-exception-handling  proc idb . params)
  (debug:print-info 11 "open-run-close-no-exception-handling START given a db=" (if idb "yes " "no ") ", params=" params)
  (if (or *db-write-access*
	  (not (member proc *db:all-write-procs*)))
      (let* ((db   (cond
		    ((sqlite3:database? idb) idb)
		    ((not idb)               (open-db))
		    ((procedure? idb)       (idb))
		    (else   	            (open-db))))
	     (res #f))
	(set! res (apply proc db params))
	(if (not idb)(sqlite3:finalize! db))
	(debug:print-info 11 "open-run-close-no-exception-handling END" )
	res)
      #f))

(define (open-run-close-exception-handling proc idb . params)
  (handle-exceptions
   exn
   (begin
     (debug:print 0 "EXCEPTION: database probably overloaded or unreadable.")
     (debug:print 0 "  " ((condition-property-accessor 'exn 'message) exn))
     (print-call-chain)
     (thread-sleep! (random 120))
     (debug:print-info 0 "trying db call one more time....")
     (apply open-run-close-no-exception-handling proc idb params))
   (apply open-run-close-no-exception-handling proc idb params)))

;; Create the sqlite db for the individual test(s)
(define (open-test-db work-area) 
  (debug:print-info 11 "open-test-db " work-area)
  (if (and work-area 
	   (directory? work-area)
	   (file-read-access? work-area))
      (let* ((dbpath    (conc work-area "/testdat.db"))
	     (tdb-writeable (file-write-access? dbpath))
	     (dbexists  (file-exists? dbpath))
	     (handler   (make-busy-timeout (if (args:get-arg "-override-timeout")
					       (string->number (args:get-arg "-override-timeout"))
					       136000))))
	(handle-exceptions
	 exn
	 (begin
	   (debug:print 2 "ERROR: problem accessing test db " work-area ", you probably should clean and re-run this test"
			((condition-property-accessor 'exn 'message) exn))
	   (set! db (sqlite3:open-database ":memory:"))) ;; open an in-memory db to allow readonly access 
	 (set! db (sqlite3:open-database dbpath)))
	(if *db-write-access* (sqlite3:set-busy-handler! db handler))
	(if (not dbexists)
	    (begin
	      (sqlite3:execute db "PRAGMA synchronous = FULL;")
	      (debug:print-info 11 "Initialized test database " dbpath)
	      (db:testdb-initialize db)))
	;; (sqlite3:execute db "PRAGMA synchronous = 0;")
	(debug:print-info 11 "open-test-db END (sucessful)" work-area)

       (sqlite3:execute db "ALTER TABLE test_meta ADD COLUMN jobgroup TEXT DEFAULT 'default';"))
      ((< mver 1.37)
       (db:set-var db "MEGATEST_VERSION" 1.37)
       (sqlite3:execute db "ALTER TABLE tests ADD COLUMN archived INTEGER DEFAULT 0;")) 
      ((< mver megatest-version)
       (db:set-var db "MEGATEST_VERSION" megatest-version))))))

;;======================================================================
;; M A I N T E N A N C E
;;======================================================================

;;  select end_time-now from
;;      (select testname,item_path,event_time+run_duration as
;;                          end_time,strftime('%s','now') as now from tests where state in
;;      ('RUNNING','REMOTEHOSTSTART','LAUNCED'));


(define (db:find-and-mark-incomplete db #!key (ovr-deadtime #f))
  (let* ((incompleted '())
	 (deadtime-str (configf:lookup *configdat* "setup" "deadtime"))
	 (deadtime     (if (and deadtime-str
				(string->number deadtime-str))
			   (string->number deadtime-str)
			   7200)) ;; two hours
	 (run-ids      (db:get-run-ids db))) ;; iterate over runs to divy up the calls
    (if (number? ovr-deadtime)(set! deadtime ovr-deadtime))
    (for-each
     (lambda (run-id)

       ;; in RUNNING or REMOTEHOSTSTART for more than 10 minutes
       ;;
       ;; THIS CANNOT WORK. The run_duration is not updated in the central db due to performance concerns.
       ;;                   The testdat.db file must be consulted.
       ;;
       ;; HOWEVER: this code in run:test seems to work fine
       ;;              (> (- (current-seconds)(+ (db:test-get-event_time testdat)
       ;;                     (db:test-get-run_duration testdat)))
       ;;                    600) 
       (sqlite3:for-each-row 
	(lambda (test-id)
	  (set! incompleted (cons test-id incompleted)))
	db
	"SELECT id FROM tests WHERE run_id=? AND (strftime('%s','now') - event_time - run_duration) > ? AND state IN ('RUNNING','REMOTEHOSTSTART');"
	run-id deadtime)

       ;; in LAUNCHED for more than one day. Could be long due to job queues TODO/BUG: Need override for this in config
       ;;
       (sqlite3:for-each-row
	(lambda (test-id)
	  (set! incompleted (cons test-id incompleted)))
	db
	"SELECT id FROM tests WHERE run_id=? AND (strftime('%s','now') - event_time - run_duration) > ? AND state IN ('LAUNCHED');"
	run-id (* 60 60 24)))
     run-ids)
       
    ;; These are defunct tests, do not do all the overhead of set-state-status. Force them to INCOMPLETE.
    ;;
    (if (> (length incompleted) 0)
	(begin
	  (debug:print 0 "WARNING: Marking test(s); " (string-intersperse (map conc incompleted) ", ") " as INCOMPLETE")
	  (sqlite3:execute 
	   db
	   (conc "UPDATE tests SET state='INCOMPLETE' WHERE id IN (" 
		 (string-intersperse (map conc incompleted) ",")
		 ");"))))))
		     
;; Clean out old junk and vacuum the database
;;
;; Ultimately do something like this:
;;
;; 1. Look at test records either deleted or part of deleted run:
;;    a. If test dir exists, set the the test to state='UNKNOWN', Set the run to 'unknown'
;;    b. If test dir gone, delete the test record

			     count-stmt)
       (map sqlite3:execute statements)
       (sqlite3:for-each-row (lambda (tot)
			       (debug:print-info 0 "Records count after  clean: " tot))
			     count-stmt)))
    (map sqlite3:finalize! statements)
    (sqlite3:finalize! count-stmt)
    (db:find-and-mark-incomplete db)
    (sqlite3:execute db "VACUUM;")))




;;======================================================================
;; meta get and set vars
;;======================================================================

;; returns number if string->number is successful, string otherwise
;; also updates *global-delta*

			    "unlocked"
			    "locked")))) ;; semi-failsafe
    (sqlite3:execute db "UPDATE runs SET state=? WHERE id=?;" newlockval run-id)
    (sqlite3:execute db "INSERT INTO access_log (user,accessed,args) VALUES(?,strftime('%s','now'),?);"
		     user (conc newlockval " " run-id))
    (debug:print-info 1 "" newlockval " run number " run-id)))

(define (db:get-run-ids db)
  (let ((res '()))
    (sqlite3:for-each-row
     (lambda (id)
       (set! res (cons id res)))
     db 
     "SELECT id FROM runs;")))

;;======================================================================
;; K E Y S
;;======================================================================

;; get key val pairs for a given run-id
;; ( (FIELDNAME1 keyval1) (FIELDNAME2 keyval2) ... )
(define (db:get-key-val-pairs db run-id)

;; states and statuses are lists, turn them into ("PASS","FAIL"...) and use NOT IN
;; i.e. these lists define what to NOT show.
;; states and statuses are required to be lists, empty is ok
;; not-in #t = above behaviour, #f = must match
(define (db:get-tests-for-run db run-id testpatt states statuses offset limit not-in sort-by sort-order
			      #!key
			      (qryvals #f))

  (let* ((qryvalstr       (case qryvals
			    ((shortlist) "id,run_id,testname,item_path,state,status")
			    ((#f)        "id,run_id,testname,state,status,event_time,host,cpuload,diskfree,uname,rundir,item_path,run_duration,final_logf,comment")
			    (else        qryvals)))
	 (res            '())
	 ;; if states or statuses are null then assume match all when not-in is false
	 (states-qry      (if (null? states) 
			      #f
			      (conc " state "  
				    (if not-in
					" NOT IN ('"

	    (conc " AND ( " states-qry " AND " statuses-qry " ) "))
	   (states-qry  
	    (conc " AND " states-qry))
	   (statuses-qry 
	    (conc " AND " statuses-qry))
	   (else "")))
	 (tests-match-qry (tests:match->sqlqry testpatt))
	 (qry             (conc "SELECT " qryvalstr
				" FROM tests WHERE run_id=? AND state != 'DELETED' "
				states-statuses-qry
				(if tests-match-qry (conc " AND (" tests-match-qry ") ") "")
				(case sort-by
				  ((rundir)      " ORDER BY length(rundir) ")
				  ((testname)    (conc " ORDER BY testname " (if sort-order (conc sort-order ",") "") " item_path "))
				  ((statestatus) (conc " ORDER BY state " (if  sort-order (conc sort-order ",") "") " status "))

    (sqlite3:for-each-row 
     (lambda (a . b) ;; id run-id testname state status event-time host cpuload diskfree uname rundir item-path run-duration final-logf comment)
       (set! res (cons (apply vector a b) res))) ;; id run-id testname state status event-time host cpuload diskfree uname rundir item-path run-duration final-logf comment) res)))
     db 
     qry
     run-id
     )
    (case qryvals
      ((shortlist)(map db:test-short-record->norm res))
      ((#f)       res)
      (else       res))))

(define (db:test-short-record->norm inrec)
  ;;  "id,run_id,testname,item_path,state,status"
  ;;  "id,run_id,testname,state,status,event_time,host,cpuload,diskfree,uname,rundir,item_path,run_duration,final_logf,comment
  (vector (vector-ref inrec 0) ;; id
	  (vector-ref inrec 1) ;; run_id
	  (vector-ref inrec 2) ;; testname
	  (vector-ref inrec 4) ;; state
	  (vector-ref inrec 5) ;; status
	  -1 "" -1 -1 "" "-" 
	  (vector-ref inrec 3) ;; item-path
	  -1 "-" "-"))


(define (db:get-tests-for-run-state-status db run-id testpatt)
  (let ((res            '())
	(tests-match-qry (tests:match->sqlqry testpatt)))
    (sqlite3:for-each-row
     (lambda (id testname item-path state status)
       ;; id,run_id,testname,state,status,event_time,host,cpuload,diskfree,uname,rundir,item_path,run_duration,final_logf,comment
       (set! res (cons (vector id run-id testname state status -1 "" -1 -1 "" "-" item-path -1 "-" "-") res)))
     db 
     (conc "SELECT id,testname,item_path,state,status FROM tests WHERE run_id=? " 
	   (if tests-match-qry (conc " AND (" tests-match-qry ") ") ""))
     run-id)
    res))

(define (db:get-testinfo-state-status db test-id)
  (let ((res            #f))
    (sqlite3:for-each-row
     (lambda (run-id testname item-path state status)
       ;; id,run_id,testname,state,status,event_time,host,cpuload,diskfree,uname,rundir,item_path,run_duration,final_logf,comment
       (set! res (vector test-id run-id testname state status -1 "" -1 -1 "" "-" item-path -1 "-" "-")))
     db 
     "SELECT run_id,testname,item_path,state,status FROM tests WHERE id=?;" 
     test-id)
    res))

;; get a useful subset of the tests data (used in dashboard
;; use db:mintests-get-{id ,run_id,testname ...}
(define (db:get-tests-for-runs-mindata db run-ids testpatt states status not-in)
  (db:get-tests-for-runs db run-ids testpatt states status not-in: not-in qryvals: "id,run_id,testname,state,status,event_time,item_path"))


;; NB // This is get tests for "runs" (note the plural!!)
;;
;; states and statuses are lists, turn them into ("PASS","FAIL"...) and use NOT IN
;; i.e. these lists define what to NOT show.
;; states and statuses are required to be lists, empty is ok
;; not-in #t = above behaviour, #f = must match

    res))

;; this one is a bit broken BUG FIXME
(define (db:delete-test-step-records db test-id #!key (work-area #f))
  ;; Breaking it into two queries for better file access interleaving
  (let* ((tdb (db:open-test-db-by-test-id db test-id work-area: work-area)))
    ;; test db's can go away - must check every time
    (if (sqlite3:database? tdb)
	(begin
	  (sqlite3:execute tdb "DELETE FROM test_steps;")
	  (sqlite3:execute tdb "DELETE FROM test_data;")
	  (sqlite3:finalize! tdb)))))

;; 
(define (db:delete-test-records db tdb test-id #!key (force #f))

    (sqlite3:execute db "UPDATE tests SET state=?,status=? WHERE id=?;" newstate newstatus test-id))
   (else
    (if newstate   (sqlite3:execute db "UPDATE tests SET state=?   WHERE id=?;" newstate   test-id))
    (if newstatus  (sqlite3:execute db "UPDATE tests SET status=?  WHERE id=?;" newstatus  test-id))
    (if newcomment (sqlite3:execute db "UPDATE tests SET comment=? WHERE id=?;" newcomment test-id))))
  (mt:process-triggers test-id newstate newstatus))

;; Never used, but should be?
(define (db:test-set-state-status-by-run-id-testname db run-id test-name item-path status state)
  (sqlite3:execute db "UPDATE tests SET state=?,status=?,event_time=strftime('%s','now') WHERE run_id=? AND testname=? AND item_path=?;" 
 		   state status run-id test-name item-path))

(define (db:get-count-tests-running db)
  (let ((res 0))
    (sqlite3:for-each-row
     (lambda (count)
       (set! res count))
     db

(define (cdb:get-test-info-by-id serverdat test-id)
  (let ((test-dat (cdb:client-call serverdat 'immediate #f *default-numtries* open-run-close db:get-test-info-by-id #f test-id)))
    (hash-table-set! *test-info* test-id (vector (current-seconds) test-dat)) ;; cached for use where up-to-date info is not needed
    test-dat))

;; db should be db open proc or #f
(define (cdb:remote-run proc db . params)
  (if (or *db-write-access*
	  (not (member proc *db:all-write-procs*)))
      (apply cdb:client-call *runremote* 'immediate #f *default-numtries* open-run-close proc #f params)
      (begin
	(debug:print 0 "ERROR: Attempt to access read-only database")
	#f)))

(define (db:test-get-logfile-info db run-id test-name)
  (let ((res #f))
    (sqlite3:for-each-row 
     (lambda (path final_logf)
       (set! logf final_logf)
       (set! res (list path final_logf))

    (debug:print-info 11 "Special queries/requests stmt-key=" stmt-key ", return-address=" return-address ", query=" query ", params=" params)
    (if query
	;; hand queries off to the write queue
	(let ((response (case *transport-type*
			  ((http)
			   (debug:print-info 7 "Queuing item " item " for wrapped write")
			   (db:queue-write-and-wait db qry-sig query params))
			  (else 
			   (apply sqlite3:execute db query params)
			   #t))))
	  (debug:print-info 7 "Received " response " from wrapped write")
	  (server:reply return-address qry-sig response response))
	;; otherwise if appropriate flush the queue (this is a read or complex query)
	(begin
	  (cond

;;======================================================================
;; T E S T   D A T A 
;;======================================================================

(define (db:csv->test-data db test-id csvdata #!key (work-area #f))
  (debug:print 4 "test-id " test-id ", csvdata: " csvdata)
  (let ((tdb     (db:open-test-db-by-test-id db test-id work-area: work-area)))
    (if (sqlite3:database? tdb)
	(let ((csvlist (csv->list (make-csv-reader
				   (open-input-string csvdata)
				   '((strip-leading-whitespace? #t)
				     (strip-trailing-whitespace? #t)) )))) ;; (csv->list csvdata)))
	  (for-each 
	   (lambda (csvrow)
	     (let* ((padded-row  (take (append csvrow (list #f #f #f #f #f #f #f #f #f)) 9))

				test-id category variable value expected tol units (if comment comment "") status type)))
	   csvlist)
	  (sqlite3:finalize! tdb)))))

;; get a list of test_data records matching categorypatt
(define (db:read-test-data db test-id categorypatt #!key (work-area #f))
  (let ((tdb  (db:open-test-db-by-test-id db test-id work-area: work-area)))
    (if (sqlite3:database? tdb)
	(let ((res '()))
	  (sqlite3:for-each-row 
	   (lambda (id test_id category variable value expected tol units comment status type)
	     (set! res (cons (vector id test_id category variable value expected tol units comment status type) res)))
	   tdb
	   "SELECT id,test_id,category,variable,value,expected,tol,units,comment,status,type FROM test_data WHERE test_id=? AND category LIKE ? ORDER BY category,variable;" test-id categorypatt)
	  (sqlite3:finalize! tdb)

;; look at the test_data status field, 
;;    if all are pass (any case) and the test status is PASS or NULL or '' then set test status to PASS.
;;    if one or more are fail (any case) then set test status to PASS, non "pass" or "fail" are ignored
(define (db:test-data-rollup db test-id status #!key (work-area #f))
  (let ((tdb (db:open-test-db-by-test-id db test-id work-area: work-area))
	(fail-count 0)
	(pass-count 0))
    (if (sqlite3:database? tdb)
	(begin
	  (sqlite3:for-each-row
	   (lambda (fcount pcount)
	     (set! fail-count fcount)
	     (set! pass-count pcount))
	   tdb 
	   "SELECT (SELECT count(id) FROM test_data WHERE test_id=? AND status like 'fail') AS fail_count,

(define (db:step-get-time-as-string vec)
  (seconds->time-string (db:step-get-event_time vec)))

;; db-get-test-steps-for-run
(define (db:get-steps-for-test db test-id #!key (work-area #f))
  (let* ((tdb (db:open-test-db-by-test-id db test-id work-area: work-area))
	 (res '()))
    (if (sqlite3:database? tdb)
	(handle-exceptions
	 exn
	 (begin
	   (debug:print 0 "ERROR: error on access to testdat for test with id " test-id)
	   '())
	 (begin
	   (sqlite3:for-each-row 
	    (lambda (id test-id stepname state status event-time logfile)
	      (set! res (cons (vector id test-id stepname state status event-time (if (string? logfile) logfile "")) res)))
	    tdb
	    "SELECT id,test_id,stepname,state,status,event_time,logfile FROM test_steps WHERE test_id=? ORDER BY id ASC;" ;; event_time DESC,id ASC;
	    test-id)
	   (sqlite3:finalize! tdb)
	   (reverse res)))
	'())))

;; get a pretty table to summarize steps
;;
(define (db:get-steps-table db test-id #!key (work-area #f))
  (let ((steps   (db:get-steps-for-test db test-id work-area: work-area)))
    ;; organise the steps for better readability

      '()
      (let* ((unmet-pre-reqs '())
	     (result         '()))
	(for-each 
	 (lambda (waitontest-name)
	   ;; by getting the tests with matching name we are looking only at the matching test 
	   ;; and related sub items
	   (let ((tests             (cdb:remote-run db:get-tests-for-run-state-status #f run-id waitontest-name)) ;; (mt:get-tests-for-run run-id waitontest-name '() '()))
		 (ever-seen         #f)
		 (parent-waiton-met #f)
		 (item-waiton-met   #f))
	     (for-each 
	      (lambda (test)
		;; (if (equal? waitontest-name (db:test-get-testname test)) ;; by defintion this had better be true ...
		(let* ((state             (db:test-get-state test))

	     ;; (if (not ever-seen)(set! result (cons waitontest-name result)))))
	     (if (not ever-seen)
		 (set! result (append (if (null? tests)(list waitontest-name) tests) result)))))
	 waitons)
	(delete-duplicates result))))

(define (db:teststep-set-status! db test-id teststep-name state-in status-in comment logfile #!key (work-area #f))

  ;;                 db:open-test-db-by-test-id does cdb:remote-run
  (let* ((tdb       (db:open-test-db-by-test-id db test-id work-area: work-area))
	 (state     (items:check-valid-items "state" state-in))
	 (status    (items:check-valid-items "status" status-in)))
    (if (or (not state)(not status))
	(debug:print 3 "WARNING: Invalid " (if status "status" "state")
		     " value \"" (if status state-in status-in) "\", update your validvalues section in megatest.config"))
    (if (sqlite3:database? tdb)
	(begin
	  (sqlite3:execute 
	   tdb
	   "INSERT OR REPLACE into test_steps (test_id,stepname,state,status,event_time,comment,logfile) VALUES(?,?,?,?,?,?,?);"
	   test-id teststep-name state-in status-in (current-seconds) (if comment comment "") (if logfile logfile ""))
	  (sqlite3:finalize! tdb)
	  #t)

	   (debug:print 0 "WARNING: path given, " outputfile " is relative, prefixing with current directory")
	   (conc (current-directory) "/" outputfile)))
     results)
    ;; brutal clean up
    (system "rm -rf tempdir")))

;; (db:extract-ods-file db "outputfile.ods" '(("sysname" "%")("fsname" "%")("datapath" "%")) "%")

;; This is a list of all procs that write to the db
;;
(define *db:all-write-procs*
  (list 
   db:set-var 
   db:del-var
   db:register-run
   db:set-comment-for-run
   db:delete-run
   db:update-run-event_time
   db:lock/unlock-run 
   db:delete-test-step-records
   db:delete-test-records
   db:delete-tests-for-run
   db:delete-old-deleted-test-records
   db:set-tests-state-status
   db:test-set-state-status-by-id
   db:test-set-state-status-by-run-id-testname
   db:test-set-comment
   db:testmeta-add-record
   db:csv->test-data
   db:test-data-rollup
   db:teststep-set-status! ))

(define (make-db:test)(make-vector 20))
(define-inline (db:test-get-id           vec) (vector-ref vec 0))
(define-inline (db:test-get-run_id       vec) (vector-ref vec 1))
(define-inline (db:test-get-testname     vec) (vector-ref vec 2))
(define-inline (db:test-get-state        vec) (vector-ref vec 3))
(define-inline (db:test-get-status       vec) (vector-ref vec 4))
(define-inline (db:test-get-event_time   vec) (vector-ref vec 5))
(define-inline (db:test-get-host         vec) (vector-ref vec 6))

;; Single record for managing a filedb
;; make-vector-record "Filedb record" filedb fdb db dbpath pathcache idcache partcache
;; Filedb record
(define (make-filedb:fdb)(make-vector 5))
(define-inline (filedb:fdb-get-db          vec)    (vector-ref  vec 0))
(define-inline (filedb:fdb-get-dbpath      vec)    (vector-ref  vec 1))
(define-inline (filedb:fdb-get-pathcache   vec)    (vector-ref  vec 2))
(define-inline (filedb:fdb-get-idcache     vec)    (vector-ref  vec 3))
(define-inline (filedb:fdb-get-partcache   vec)    (vector-ref  vec 4))
(define-inline (filedb:fdb-set-db!         vec val)(vector-set! vec 0 val))
(define-inline (filedb:fdb-set-dbpath!     vec val)(vector-set! vec 1 val))
(define-inline (filedb:fdb-set-pathcache!  vec val)(vector-set! vec 2 val))
(define-inline (filedb:fdb-set-idcache!    vec val)(vector-set! vec 3 val))
(define-inline (filedb:fdb-set-partcache!  vec val)(vector-set! vec 4 val))

;; children records, should have use something other than "child"
(define-inline (filedb:child-get-id vec)       (vector-ref vec 0))
(define-inline (filedb:child-get-path vec)     (vector-ref vec 1))
(define-inline (filedb:child-get-parent_id vec)(vector-ref vec 2))

;; Copyright 2006-2011, Matthew Welland.
;;
;;  This program is made available under the GNU GPL version 2.0 or
;;  greater. See the accompanying file COPYING for details.
;;
;;  This program is distributed WITHOUT ANY WARRANTY; without even the
;;  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
;;  PURPOSE.

;; (require-extension synch sqlite3 posix srfi-13 srfi-1 utils regex)
(use sqlite3 srfi-1 posix regex srfi-69 srfi-13 posix-extras)
(import (prefix sqlite3 sqlite3:))

(declare (unit filedb))

(include "fdb_records.scm")
;; (include "settings.scm")

(define (filedb:open-db dbpath)
  (let* ((fdb      (make-filedb:fdb))
	 (dbexists (file-exists? dbpath))
	 (db (sqlite3:open-database dbpath)))
    (filedb:fdb-set-db!        fdb db)
    (filedb:fdb-set-dbpath!    fdb dbpath)
    (filedb:fdb-set-pathcache! fdb (make-hash-table))
    (filedb:fdb-set-idcache!   fdb (make-hash-table))
    (filedb:fdb-set-partcache! fdb (make-hash-table))
    ;(sqlite3:set-busy-timeout! db 1000000)
    (if (not dbexists)
	(begin
	  (sqlite3:execute db "PRAGMA synchronous = OFF;")
	  (sqlite3:execute db "CREATE TABLE names (id INTEGER PRIMARY KEY,name TEST);") ;; for future use - change path in paths table to path_id
	  (sqlite3:execute db "CREATE INDEX name_index ON names (name);")
	  ;; NB// We store a useful subset of file attributes but do not attempt to store all
	  (sqlite3:execute db "CREATE TABLE paths (id        INTEGER PRIMARY KEY,
                                                   path      TEXT,
                                                   parent_id INTEGER,
                                                   mode      INTEGER DEFAULT -1,
                                                   uid       INTEGER DEFAULT -1,
                                                   gid       INTEGER DEFAULT -1,
                                                   size      INTEGER DEFAULT -1,
                                                   mtime     INTEGER DEFAULT -1);")
	  (sqlite3:execute db "CREATE INDEX path_index ON paths (path,parent_id);")
	  (sqlite3:execute db "CREATE TABLE bases (id INTEGER PRIMARY KEY,base TEXT,                  updated TIMESTAMP);")))
    fdb))

(define (filedb:finalize-db! fdb)
  (sqlite3:finalize! (filedb:fdb-get-db fdb)))

(define (filedb:get-current-time-string)
  (string-chomp (time->string (seconds->local-time (current-seconds)))))

(define (filedb:get-base-id db path)
  (let ((stmt   (sqlite3:prepare db "SELECT id FROM bases WHERE base=?;"))
        (id-num #f))
    (sqlite3:for-each-row 
     (lambda (num) (set! id-num num)) stmt path)
    (sqlite3:finalize! stmt)
    id-num))

(define (filedb:get-path-id db path parent)
  (let ((stmt   (sqlite3:prepare db "SELECT id FROM paths WHERE path=? AND parent_id=?;"))
        (id-num #f))
    (sqlite3:for-each-row 
     (lambda (num) (set! id-num num)) stmt path parent)
    (sqlite3:finalize! stmt)
    id-num))

(define (filedb:add-base db path)
  (let ((existing (filedb:get-base-id db path)))
    (if existing #f
        (begin
          (sqlite3:execute db "INSERT INTO bases (base,updated) VALUES (?,?);" path (filedb:get-current-time-string))))))

;; index 	value 	field 	notes
;; 0 	inode number 	st_ino 	
;; 1 	mode 	st_mode 	bitfield combining file permissions and file type
;; 2 	number of hard links 	st_nlink 	
;; 3 	UID of owner 	st_uid 	as with file-owner
;; 4 	GID of owner 	st_gid 	
;; 5 	size 	st_size 	as with file-size
;; 6 	access time 	st_atime 	as with file-access-time
;; 7 	change time 	st_ctime 	as with file-change-time
;; 8 	modification time 	st_mtime 	as with file-modification-time
;; 9 	parent device ID 	st_dev 	ID of device on which this file resides
;; 10 	device ID 	st_rdev 	device ID for special files (i.e. the raw major/minor number)
;; 11 	block size 	st_blksize 	
;; 12 	number of blocks allocated 	st_blocks 	

(define (filedb:add-path-stat db path parent statinfo)
  (let ((stmt (sqlite3:prepare db "INSERT INTO paths (path,parent_id,mode,uid,gid,size,mtime) VALUES (?,?,?,?,?,?,?);")))
	(sqlite3:execute stmt
			 path
			 parent
			 (vector-ref statinfo 1) ;; mode
			 (vector-ref statinfo 3) ;; uid
			 (vector-ref statinfo 4) ;; gid
			 (vector-ref statinfo 5) ;; size
			 (vector-ref statinfo 8) ;; mtime
			 )
	(sqlite3:finalize! stmt))) ;;  (filedb:get-current-time-string))))
  
(define (filedb:add-path db path parent)
  (let ((stmt (sqlite3:prepare db "INSERT INTO paths (path,parent_id) VALUES (?,?);")))
    (sqlite3:execute stmt path parent)
    (sqlite3:finalize! stmt)))

(define (filedb:register-path fdb path #!key (save-stat #f))
  (let* ((db        (filedb:fdb-get-db        fdb))
	 (pathcache (filedb:fdb-get-pathcache fdb))
	 (stat      (if save-stat (file-stat path #t)))
	 (id        (hash-table-ref/default pathcache path #f)))
    (if id id 
        (let ((plist (string-split path "/")))
          (let loop ((head (car plist))
                     (tail (cdr plist))
                     (parent 0))
            (let ((id (filedb:get-path-id db head parent))
                  (done (null? tail)))
              (if id          ;; we'll have a id if the path is already registered
                  (if done 
                      (begin
                        (hash-table-set! pathcache path id)
                        id) ;; return the last path id for a result
                      (loop (car tail)(cdr tail) id))
                  (begin      ;; add the path and then repeat the loop with the same data
		    (if save-stat
			(filedb:add-path-stat db head parent stat) 
			(filedb:add-path db head parent))
                    (loop head tail parent)))))))))

(define (filedb:update-recursively fdb path #!key (save-stat #f))
  (let ((p  (open-input-pipe (string-append "find -L " path)))) ;; (resolve-pathname path)))) ;; (string-append "find " path))))
    (print "processed 0 files...")
    (let loop ((l  (read-line p))
               (lc 0)) ;; line count
      (if (eof-object? l) 
	  (begin
	    (print "          " lc " files")
	    (close-input-port p))
          (begin
            (filedb:register-path fdb l save-stat: save-stat) ;; (get-real-path l)) ;; don't like losing the original path info
            (if (= (modulo lc 100) 0)
                (print "          " lc " files"))
            (loop (read-line p)(+ lc 1)))))))

(define (filedb:update fdb path #!key (save-stat #f))
  ;; first get the realpath and add it to the bases table
  (let ((real-path path) ;; (filedb:get-real-path path))
	(db        (filedb:fdb-get-db    fdb)))
    (filedb:add-base db real-path)
    (filedb:update-recursively fdb path save-stat: save-stat)))

;; not used and broken
;;
(define (filedb:get-real-path path)
  (let* ((p (open-input-pipe (string-append real-path " " (regexp-escape path))))
         (pth (read-line p)))
    (if (eof-object? pth) path
	(begin
	  (close-input-port p)
	  pth))))

(define (filedb:drop-base fdb path)
  (print "Sorry, I don't do anything yet"))

(define (filedb:find-all fdb pattern action)
  (let* ((db     (filedb:fdb-get-db fdb))
	 (stmt   (sqlite3:prepare db "SELECT id FROM paths WHERE path like ?;"))
	 (result '()))
    (sqlite3:for-each-row 
     (lambda (num)
       (action num)
       (set! result (cons num result))) stmt pattern)
    (sqlite3:finalize! stmt)
    result))

(define (filedb:get-path-record fdb id)
  (let* ((db        (filedb:fdb-get-db        fdb))
	 (partcache (filedb:fdb-get-partcache fdb))
	 (dat (hash-table-ref/default partcache id #f)))
    (if dat dat
	(let ((stmt (sqlite3:prepare db "SELECT path,parent_id FROM paths WHERE id=?;"))
	      (result #f))
	  (sqlite3:for-each-row 
	   (lambda (path parent_id)(set! result (list path parent_id))) stmt id)
	  (hash-table-set! partcache id result)
	  (sqlite3:finalize! stmt)
	  result))))

(define (filedb:get-children fdb parent-id)
  (let* ((db        (filedb:fdb-get-db fdb))
	 (res       '()))
    (sqlite3:for-each-row
     (lambda (id path parent-id)
       (set! res (cons (vector id path parent-id) res)))
     db "SELECT id,path,parent_id FROM paths WHERE parent_id=?;"
     parent-id)
    res))

;; retrieve all that have children and those without
;; children that match patt
(define (filedb:get-children-patt fdb parent-id search-patt)
  (let* ((db        (filedb:fdb-get-db fdb))
	 (res       '()))
    ;; first get the children that have no children
    (sqlite3:for-each-row
     (lambda (id path parent-id)
       (set! res (cons (vector id path parent-id) res)))
     db "SELECT id,path,parent_id FROM paths WHERE parent_id=? AND 
            (id IN (SELECT parent_id FROM paths) OR path LIKE ?);"
     parent-id search-patt)
    res))

(define (filedb:get-path fdb id)
  (let* ((db      (filedb:fdb-get-db      fdb))
	 (idcache (filedb:fdb-get-idcache fdb))
	 (path    (hash-table-ref/default idcache id #f)))
    (if path path
        (let loop ((curr-id id)
                   (path    ""))
          (let ((path-record (filedb:get-path-record fdb curr-id)))
            (if (not path-record) #f ;; this id has no path
                (let* ((parent-id (list-ref path-record 1))
                       (pname     (list-ref path-record 0))
                       (newpath   (string-append  "/" pname path)))
                  (if (= parent-id 0) ;; fields 0=path, 1=parent. root parent=0
                      (begin
                        (hash-table-set! idcache id newpath)
                        newpath)
                      (loop parent-id newpath)))))))))

(define (filedb:search db pattern)
  (let ((action (lambda (id)(print (filedb:get-path db id)))))
    (filedb:find-all db pattern action)))

			       (list? x))
			     (map (lambda (x)
				    (debug:print 6 "item-assoc->item-list x: " x)
				    (if (< (length x) 2)
					(begin
					  (debug:print 0 "ERROR: malformed items spec " (string-intersperse x " "))
					  (list (car x)'()))
					(let* ((name (car x))
					       (items (cadr x))
					       (ilist (list name (if (string? items)
								     (string-split items)
								     '()))))
					  (if (null? ilist)
					      (debug:print 0 "ERROR: No items specified for " name))
					  ilist)))
				  itemsdat))))
	(let ((debuglevel 5))
	  (debug:print 5 "item-assoc->item-list: itemsdat => itemlst ")
	  (if (debug:debug-mode 5)
	      (begin
		(pp itemsdat)
		(print " => ")

			(if s (string-split s) #f))))
    (if valid-values
	(if (member item valid-values)
	    item #f)
	item)))

(define (items:get-items-from-config tconfig)
  (let* ((have-items  (hash-table-ref/default tconfig "items"      #f))
	 (have-itable (hash-table-ref/default tconfig "itemstable" #f))
	 (items       (hash-table-ref/default tconfig "items"      '()))
	 (itemstable  (hash-table-ref/default tconfig "itemstable" '())))
    (debug:print 5 "items: " items " itemstable: " itemstable)
    (set! items (map (lambda (item)
		       (if (procedure? (cadr item))
			   (list (car item)((cadr item)))
			   item))
		     items))
    (set! itemstable (map (lambda (item)
			    (if (procedure? (cadr item))
				(list (car item)((cadr item)))
				item))
			  itemstable))
    (if (and have-items  (null? items))     (debug:print 0 "ERROR: [items] section in testconfig but no entries defined"))
    (if (and have-itable (null? itemstable))(debug:print 0 "ERROR: [itemstable] section in testconfig but no entries defined"))
    (if (or (not (null? items))(not (null? itemstable)))
	(append (item-assoc->item-list items)
		(item-table->item-list itemstable))
	'(()))))

;; (pp (item-assoc->item-list itemdat))


	

		       (let ((varval (string-split varpair "=")))
			 (if (eq? (length varval) 2)
			     (let ((var (car varval))
				   (val (cadr varval)))
			       (debug:print 1 "Adding pre-var/val " var " = " val " to the environment")
			       (setenv var val)))))
		     varpairs)))
	  (for-each
	   (lambda (varval)
	     (let ((var (car varval))
		   (val (cadr varval)))
	       (if val
		   (setenv var val)
		   (begin
		     (debug:print 0 "ERROR: required variable " var " does not have a valid value. Exiting")
		     (exit)))))
	     (list 
	      (list  "MT_TEST_RUN_DIR" work-area)
	      (list  "MT_TEST_NAME" test-name)
	      (list  "MT_ITEM_INFO" (conc itemdat))
	      (list  "MT_RUNNAME"   runname)
	      (list  "MT_MEGATEST"  megatest)
	      (list  "MT_TARGET"    target)
	      (list  "MT_LINKTREE"  (configf:lookup *configdat* "setup" "linktree"))))
	  (if mt-bindir-path (setenv "PATH" (conc (getenv "PATH") ":" mt-bindir-path)))
	  ;; (change-directory top-path)
	  (if (not (setup-for-run))
	      (begin
		(debug:print 0 "Failed to setup, exiting") 
		;; (sqlite3:finalize! db)
		;; (sqlite3:finalize! tdb)
		(exit 1)))
	  ;; Can setup as client for server mode now
	  ;; (client:setup)

	  (change-directory *toppath*) 
	  (set-megatest-env-vars run-id inkeys: keys inkeyvals: keyvals) ;; these may be needed by the launching process
	  (change-directory work-area) 

	  (set-run-config-vars run-id keyvals target) ;; (db:get-target db run-id))
	  ;; environment overrides are done *before* the remaining critical envars.
	  (alist->env-vars env-ovrd)
	  (set-megatest-env-vars run-id inkeys: keys inkeyvals: keyvals)
	  (set-item-env-vars itemdat)
	  (save-environment-as-files "megatest")
	  ;; open-run-close not needed for test-set-meta-info
	  (tests:set-full-meta-info #f test-id run-id 0 work-area)

	  ;; (tests:test-set-status! test-id "REMOTEHOSTSTART" "n/a" (args:get-arg "-m") #f)
	  (tests:test-force-state-status! test-id "REMOTEHOSTSTART" "n/a")

									       ((eq? rollup-status 0) 'pass)
									       (else 'fail)))
							    (next-status      (cond 
									       ((eq? overall-status 'pass) this-step-status)
									       ((eq? overall-status 'warn)
										(if (eq? this-step-status 'fail) 'fail 'warn))
									       (else 'fail)))
							    (next-state       ;; "RUNNING") ;; WHY WAS THIS CHANGED TO NOT USE (null? tal) ??
							                       (cond
									       ((null? tal) ;; more to run?
									        "COMPLETED")
									       (else "RUNNING")))
							    )
						       (debug:print 4 "Exit value received: " (vector-ref exit-info 2) " logpro-used: " logpro-used 
								    " this-step-status: " this-step-status " overall-status: " overall-status 
								    " next-status: " next-status " rollup-status: " rollup-status)
						       (case next-status
							 ((warn)
							  (set! rollup-status 2)
							  ;; NB// test-set-status! does rdb calls under the hood
							  (tests:test-set-status! test-id next-state "WARN" 
									  (if (eq? this-step-status 'warn) "Logpro warning found" #f)
									  #f))
							 ((pass)
							  (tests:test-set-status! test-id next-state "PASS" #f #f))
							 (else ;; 'fail
							  (set! rollup-status 1) ;; force fail, this used to be next-state but that doesn't make sense. should always be "COMPLETED" 
							  (tests:test-set-status! test-id "COMPLETED" "FAIL" (conc "Failed at step " stepname) #f)
							  ))))
						   (if (and (steprun-good? logpro-used (vector-ref exit-info 2))
							    (not (null? tal)))
						       (loop (car tal) (cdr tal) stepname)))
						 (debug:print 4 "WARNING: a prior step failed, stopping at " ezstep))))))))
		 (monitorjob   (lambda ()
				 (let* ((start-seconds (current-seconds))

						   ;;      (car processes))
						   ;;     (system (conc "kill -9 -" pid))))
						   (begin
						     (debug:print 0 "WARNING: Request received to kill job but problem with process, attempting to kill manager process")
						     (tests:test-set-status! test-id "KILLED"  "FAIL"
								     (args:get-arg "-m") #f)
						     (sqlite3:finalize! tdb)
						     (exit 1) ;; IS THIS NECESSARY OR WISE???
						     )))
					     (set! kill-tries (+ 1 kill-tries))
					     (mutex-unlock! m)))
				       ;; (sqlite3:finalize! db)
				       (if keep-going
					   (begin
					     (thread-sleep! 3) ;; (+ 3 (random 6))) ;; add some jitter to the call home time to spread out the db accesses
					     (if keep-going
						 (loop (calc-minutes)))))))
				   (tests:update-central-meta-info test-id (get-cpu-load) (get-df (current-directory))(calc-minutes) #f #f)))) ;; NOTE: Checking twice for keep-going is intentional
		 (th1          (make-thread monitorjob "monitor job"))
		 (th2          (make-thread runit "run job")))
	    (set! job-thread th2)
	    (thread-start! th1)
	    (thread-start! th2)
	    (thread-join! th2)
	    (set! keep-going #f)
	    (thread-join! th1)
	    ;; (thread-sleep! 1)
	    ;; (thread-terminate! th1) ;; Not sure if this is a good idea
	    (thread-sleep! 1)       ;; give thread th1 a chance to be done TODO: Verify this is needed. At 0.1 I was getting fail to stop, increased to total of 1.1 sec.
	    ;; (tests:update-central-meta-info test-id cpuload diskfree minutes #f #f)
	    (mutex-lock! m)
	    (let* ((item-path (item-list->path itemdat))
		   ;; only state and status needed - use lazy routine
		   (testinfo  (cdb:remote-run db:get-testinfo-state-status #f test-id))) ;;;(cdb:get-test-info-by-id *runremote* test-id))) ;; )) ;; run-id test-name item-path)))
	      ;; Am I completed?
	      (if (member (db:test-get-state testinfo) '("REMOTEHOSTSTART" "RUNNING")) ;; NOTE: It should *not* be REMOTEHOSTSTART but for reasons I don't yet understand it sometimes gets stuck in that state ;; (not (equal? (db:test-get-state testinfo) "COMPLETED"))
		  (let ((new-state  (if kill-job? "KILLED" "COMPLETED") ;; (if (eq? (vector-ref exit-info 2) 0) ;; exited with "good" status
				                                        ;; "COMPLETED"
							                ;; (db:test-get-state testinfo)))   ;; else preseve the state as set within the test
				    )
			(new-status (cond

		       " - creating link from: " test-path "\n"
		       "                   to: " lnktarget)

	  ;; If there is already a symlink delete it and recreate it.
	  (handle-exceptions
	   exn
	   (begin
	     (debug:print 0 "ERROR:  Failed to re-create link " lnktarget ((condition-property-accessor 'exn 'message) exn) ", exiting")
	     (exit))
	   (if (symbolic-link? lnktarget)     (delete-file lnktarget))
	   (if (not (file-exists? lnktarget)) (create-symbolic-link test-path lnktarget)))))

    ;; I suspect this section was deleting test directories under some 
    ;; wierd sitations? This doesn't make sense - reenabling the rm -f 
    ;; I honestly don't remember *why* this chunk was needed...

	 (launcher        (config-lookup *configdat* "jobtools"     "launcher"))
	 (runscript       (config-lookup test-conf   "setup"        "runscript"))
	 (ezsteps         (> (length (hash-table-ref/default test-conf "ezsteps" '())) 0)) ;; don't send all the steps, could be big
	 (diskspace       (config-lookup test-conf   "requirements" "diskspace"))
	 (memory          (config-lookup test-conf   "requirements" "memory"))
	 (hosts           (config-lookup *configdat* "jobtools"     "workhosts"))
	 (remote-megatest (config-lookup *configdat* "setup" "executable"))
	 (run-time-limit  (or (configf:lookup  test-conf   "requirements" "runtimelim")
			      (configf:lookup  *configdat* "setup" "runtimelim")))
	 ;; FIXME SOMEDAY: not good how this is so obtuse, this hack is to 
	 ;;                allow running from dashboard. Extract the path
	 ;;                from the called megatest and convert dashboard
	 ;;             	  or dboard to megatest
	 (local-megatest  (let* ((lm  (car (argv)))
				 (dir (pathname-directory lm))
				 (exe (pathname-strip-directory lm)))

;; Always use two digit decimal
;; 1.01, 1.02...1.10,1.11 ... 1.99,2.00..

(declare (unit megatest-version))

(define megatest-version 1.5514)

  -transport http|fs      : use http or direct access for transport (default is http) 
  -daemonize              : fork into background and disconnect from stdin/out
  -list-servers           : list the servers 
  -stop-server id         : stop server specified by id (see output of -list-servers), use
                            0 to kill all
  -repl                   : start a repl (useful for extending megatest)
  -load file.scm          : load and run file.scm
  -mark-incompletes       : find and mark incomplete tests

Spreadsheet generation
  -extract-ods fname.ods  : extract an open document spreadsheet from the database
  -pathmod path           : insert path, i.e. path/runame/itempath/logfile.html
                            will clear the field if no rundir/testname/itempath/logfile
                            if it contains forward slashes the path will be converted
                            to windows style

			"-runall"    ;; run all tests
			"-remove-runs"
			"-rebuild-db"
			"-cleanup-db"
			"-rollup"
			"-update-meta"
			"-gen-megatest-area"
			"-mark-incompletes"

			"-logging"
			"-v" ;; verbose 2, more than normal (normal is 1)
			"-q" ;; quiet 0, errors/warnings only
		       )
		 args:arg-hash
		 0))

      (if (not (setup-for-run))
	  (begin
	    (debug:print 0 "Failed to setup, exiting") 
	    (exit 1)))
      ;; keep this one local
      (open-run-close db:clean-up #f)
      (set! *didsomething* #t)))

(if (args:get-arg "-mark-incompletes")
    (begin
      (if (not (setup-for-run))
	  (begin
	    (debug:print 0 "Failed to setup, exiting") 
	    (exit 1)))
      (open-run-close db:find-and-mark-incomplete #f)
      (set! *didsomething* #t)))

;;======================================================================
;; Wait on a run to complete
;;======================================================================

(if (args:get-arg "-run-wait")
    (begin

    (begin
      (if (not (setup-for-run))
	  (begin
	    (debug:print 0 "Failed to setup, exiting") 
	    (exit 1)))
      ;; now can find our db
      ;; keep this one local
      (open-run-close runs:update-all-test_meta #f)
      (set! *didsomething* #t)))

;;======================================================================
;; Start a repl
;;======================================================================

(if (or (args:get-arg "-repl")

		  full-list
		  new-offset
		  limit))
	  full-list))))

(define (mt:get-prereqs-not-met run-id waitons ref-item-path #!key (mode 'normal))
  (db:get-prereqs-not-met run-id waitons ref-item-path mode: mode))

(define (mt:lazy-get-prereqs-not-met run-id waitons ref-item-path #!key (mode 'normal))
  (let* ((key    (list run-id waitons ref-item-path mode))
	 (res    (hash-table-ref/default *pre-reqs-met-cache* key #f))
	 (useres (let ((last-time (if (vector? res) (vector-ref res 0) #f)))
		   (if last-time
		       (< (current-seconds)(+ last-time 5))
		       #f))))
    (if useres
	(let ((result (vector-ref res 1)))
	  (debug:print 4 "Using lazy value res: " result)
	  result)
	(let ((newres (db:get-prereqs-not-met run-id waitons ref-item-path mode: mode)))
	  (hash-table-set! *pre-reqs-met-cache* key (vector (current-seconds) newres))
	  newres))))

(define (mt:get-run-stats)
  (cdb:remote-run db:get-run-stats #f))

(define (mt:discard-blocked-tests run-id failed-test tests test-records)
  (if (null? tests)
      tests
      (begin
	(debug:print-info 1 "Discarding tests from " tests " that are waiting on " failed-test)
	(let loop ((testn (car tests))
		   (remt  (cdr tests))
		   (res   '()))
	  (let ((waitons (vector-ref (hash-table-ref/default test-records testn (vector #f #f '())) 2)))
	    ;; (print "mt:discard-blocked-tests run-id: " run-id " failed-test: " failed-test " testn: " testn " with waitons: " waitons)
	    (if (null? remt)
		(let ((new-res (reverse res)))
		  ;; (print "       new-res: " new-res)
		  new-res)
		(loop (car remt)
		      (cdr remt)
		      (if (member failed-test waitons)
			  res
			  (cons testn res)))))))))

;;======================================================================
;;  T R I G G E R S
;;======================================================================

(define (mt:process-triggers test-id newstate newstatus)
  (let* ((test-dat      (mt:lazy-get-test-info-by-id test-id))

	     (hash-table-set! vals (car key) (cadr key))) ;; (cdb:remote-run db:get-run-key-val #f run-id (car key))))
	   keyvals)))
    ;; from the cached data set the vars
    (hash-table-for-each
     vals
     (lambda (key val)
       (debug:print 2 "setenv " key " " val)
       (if (and (string? key)
		(string? val))
	   (setenv key val)
	   (debug:print 0 "ERROR: Malformed environment variable definition: var=" var ", val=" val))))
    (if (not (get-environment-variable "MT_TARGET"))(setenv "MT_TARGET" target))
    (alist->env-vars (hash-table-ref/default *configdat* "env-override" '()))
    ;; Lets use this as an opportunity to put MT_RUNNAME in the environment
    (setenv "MT_RUNNAME" (if inrunname inrunname (cdb:remote-run db:get-run-name-from-id #f run-id)))
    (setenv "MT_RUN_AREA_HOME" *toppath*)))

(define (set-item-env-vars itemdat)

	 (deferred          '()) ;; delay running these since they have a waiton clause
	 (runconfigf         (conc  *toppath* "/runconfigs.config"))
	 (required-tests    '())
	 (test-records       (make-hash-table))
	 (all-tests-registry (tests:get-all)) ;; (tests:get-valid-tests (make-hash-table) test-search-path)) ;; all valid tests to check waiton names
	 (all-test-names     (hash-table-keys all-tests-registry))
	 (test-names         (tests:filter-test-names all-test-names test-patts)))

    ;; Update the synchronous setting in the db based on the default or what is set by the user
    ;; This is done once here on a call to run tests rather than on every call to open-db
    (cdb:remote-run db:set-sync #f)

    (set-megatest-env-vars run-id inkeys: keys) ;; these may be needed by the launching process
    (if (file-exists? runconfigf)
	(setup-env-defaults runconfigf run-id *already-seen-runconfig-info* keyvals "pre-launch-env-vars")
	(debug:print 0 "WARNING: You do not have a run config file: " runconfigf))
    
    ;; look up all tests matching the comma separated list of globs in
    ;; test-patts (using % as wildcard)

	(begin
	  ;; have to delete test records where NOT_STARTED since they can cause -keepgoing to 
	  ;; get stuck due to becoming inaccessible from a failed test. I.e. if test B depends 
	  ;; on test A but test B reached the point on being registered as NOT_STARTED and test
	  ;; A failed for some reason then on re-run using -keepgoing the run can never complete.
	  (cdb:delete-tests-in-state *runremote* run-id "NOT_STARTED")
	  (cdb:remote-run db:set-tests-state-status #f run-id test-names #f "FAIL" "NOT_STARTED" "FAIL")))

    ;; Ensure all tests are registered in the test_meta table
    (runs:update-all-test_meta #f)

    ;; now add non-directly referenced dependencies (i.e. waiton)
    ;;======================================================================
    ;; refactoring this block into tests:get-full-data
    ;;
    ;; What happended, this code is now duplicated in tests!?
    ;;

      (cdr reg)
      (if (null? tal) ;; if tal is null and reg not full then '() as reg contents moved to tal
	  '()
	  reg)))

(define runs:nothing-left-in-queue-count 0)

(define (runs:expand-items hed tal reg reruns regfull newtal jobgroup max-concurrent-jobs run-id waitons item-path testmode test-record can-run-more items runname tconfig reglen test-registry test-records)
  (let* ((loop-list       (list hed tal reg reruns))
	 (prereqs-not-met (mt:lazy-get-prereqs-not-met run-id waitons item-path mode: testmode))
	 (fails           (runs:calc-fails prereqs-not-met))
	 (non-completed   (runs:calc-not-completed prereqs-not-met)))
    (debug:print-info 4 "START OF INNER COND #2 "
		      "\n can-run-more:    " can-run-more
		      "\n testname:        " hed
		      "\n prereqs-not-met: " (runs:pretty-string prereqs-not-met)
		      "\n non-completed:   " (runs:pretty-string non-completed) 
		      "\n fails:           " (runs:pretty-string fails)
		      "\n testmode:        " testmode
		      "\n (eq? testmode 'toplevel): " (eq? testmode 'toplevel)
		      "\n (null? non-completed):    " (null? non-completed)
		      "\n reruns:          " reruns
		      "\n items:           " items
		      "\n can-run-more:    " can-run-more)

    (cond
     ;; all prereqs met, fire off the test
     ;; or, if it is a 'toplevel test and all prereqs not met are COMPLETED then launch

     ((member (hash-table-ref/default test-registry (runs:make-full-test-name hed item-path) 'n/a)
	      '(DONOTRUN removed)) ;; *common:cant-run-states-sym*) ;; '(COMPLETED KILLED WAIVED UNKNOWN INCOMPLETE)) ;; try to catch repeat processing of COMPLETED tests here
      (debug:print-info 1 "Test " hed " set to \"" (hash-table-ref test-registry (runs:make-full-test-name hed item-path)) "\". Removing it from the queue")
      (if (or (not (null? tal))
	      (not (null? reg)))
	  (list (runs:queue-next-hed tal reg reglen regfull)
		(runs:queue-next-tal tal reg reglen regfull)

	(set-megatest-env-vars run-id inrunname: runname) ;; these may be needed by the launching process
	(let ((items-list (items:get-items-from-config tconfig)))
	  (if (list? items-list)
	      (begin
		(tests:testqueue-set-items! test-record items-list)
		(list hed tal reg reruns))
	      (begin
		(debug:print 0 "ERROR: The proc from reading the items table did not yield a list - please report this")
		(exit 1))))))

     ((and (null? fails)
	   (not (null? non-completed)))
      (let* ((allinqueue (map (lambda (x)(if (string? x) x (db:test-get-testname x)))
        		      (append newtal reruns)))
	     ;; prereqstrs is a list of test names as strings that are prereqs for hed

	;; We need to use this to dequeue this item as CANNOTRUN
	(for-each (lambda (prereq)
		    (if (eq? (hash-table-ref/default test-registry prereq 'justfine) 'CANNOTRUN)
			(set! give-up #t)))
		  prereqstrs)
	(if (and give-up
		 (not (and (null? tal)(null? reg))))
	    (let ((trimmed-tal (mt:discard-blocked-tests run-id hed tal test-records))
		  (trimmed-reg (mt:discard-blocked-tests run-id hed reg test-records)))
	      (debug:print 1 "WARNING: test " hed " has discarded prerequisites, removing it from the queue")
	      (if (and (null? trimmed-tal)
		       (null? trimmed-reg))
		  #f
		  (list (runs:queue-next-hed trimmed-tal trimmed-reg reglen regfull)
			(runs:queue-next-tal trimmed-tal trimmed-reg reglen regfull)
			(runs:queue-next-reg trimmed-tal trimmed-reg reglen regfull)
			reruns)))
	      (list (car newtal)(append (cdr newtal) reg) '() reruns))))


     ;; (debug:print-info 1 "allinqueue: " allinqueue)
     ;; (debug:print-info 1 "prereqstrs: " prereqstrs)
     ;; (debug:print-info 1 "notinqueue: " notinqueue)
     ;; (debug:print-info 1 "tal:        " tal)
     ;; (debug:print-info 1 "newtal:     " newtal)
     ;; (debug:print-info 1 "reg:        " reg)

(define (runs:process-expanded-tests hed tal reg reruns reglen regfull test-record runname test-name item-path jobgroup max-concurrent-jobs run-id waitons item-path testmode test-patts required-tests test-registry registry-mutex flags keyvals run-info newtal all-tests-registry)
  (let* ((run-limits-info         (runs:can-run-more-tests jobgroup max-concurrent-jobs)) ;; look at the test jobgroup and tot jobs running
	 (have-resources          (car run-limits-info))
	 (num-running             (list-ref run-limits-info 1))
	 (num-running-in-jobgroup (list-ref run-limits-info 2)) 
	 (max-concurrent-jobs     (list-ref run-limits-info 3))
	 (job-group-limit         (list-ref run-limits-info 4))
	 (prereqs-not-met         (mt:lazy-get-prereqs-not-met run-id waitons item-path mode: testmode))
	 (fails                   (runs:calc-fails prereqs-not-met))
	 (non-completed           (runs:calc-not-completed prereqs-not-met))
	 (loop-list               (list hed tal reg reruns)))
    (debug:print-info 4 "have-resources: " have-resources " prereqs-not-met: (" 
		      (string-intersperse 
		       (map (lambda (t)
			      (if (vector? t)

     
     ;; This is the final stage, everything is in place so launch the test
     ;;
     ((and have-resources
	   (or (null? prereqs-not-met)
	       (and (eq? testmode 'toplevel)
		    (null? non-completed))))
      ;; (hash-table-delete! *max-tries-hash* (runs:make-full-test-name test-name item-path))
      ;; we are going to reset all the counters for test retries by setting a new hash table
      ;; this means they will increment only when nothing can be run
      (set! *max-tries-hash* (make-hash-table))
      (run:test run-id run-info keyvals runname test-record flags #f test-registry all-tests-registry)
      (hash-table-set! test-registry (runs:make-full-test-name test-name item-path) 'running)
      (runs:shrink-can-run-more-tests-count)  ;; DELAY TWEAKER (still needed?)
      ;; (thread-sleep! *global-delta*)
      (if (or (not (null? tal))(not (null? reg)))
	  (list (runs:queue-next-hed tal reg reglen regfull)
		(runs:queue-next-tal tal reg reglen regfull)
		(runs:queue-next-reg tal reg reglen regfull)
		reruns)
	  #f))
     
     ;; must be we have unmet prerequisites
     ;;
     (else
      (debug:print 4 "FAILS: " fails)
      ;; If one or more of the prereqs-not-met are FAIL then we can issue
      ;; a message and drop hed from the items to be processed.
      ;; (runs:mixed-list-testname-and-testrec->list-of-strings prereqs-not-met)
      (if (not (null? prereqs-not-met))
	  (debug:print-info 1 "waiting on tests; " (string-intersperse 
						    (runs:mixed-list-testname-and-testrec->list-of-strings 
						     prereqs-not-met) ", ")))
      
      (if (null? fails)
	  (begin
	    ;; couldn't run, take a breather
	    (debug:print-info 0 "Waiting for more work to do...")
	    (thread-sleep! 1)
	    (list (car newtal)(cdr newtal) reg reruns))

			  (cons hed reruns)))
		  (begin
		    (debug:print 0 "WARNING: Test not processed correctly. Could be a race condition in your test implementation? Dropping test " hed) ;;  " as it has prerequistes that are FAIL. (NOTE: hed is not a vector)")
		    (runs:shrink-can-run-more-tests-count) ;; DELAY TWEAKER (still needed?)
		    ;; (list hed tal reg reruns)
		    (list (car newtal)(cdr newtal) reg reruns)
		    ))))))))

;; every time though the loop increment the test/itempatt val.
;; when the min is > max-allowed and none running then force exit
;;
(define *max-tries-hash* (make-hash-table))

;; test-records is a hash table testname:item_path => vector < testname testconfig waitons priority items-info ... >
(define (runs:run-tests-queue run-id runname test-records keyvals flags test-patts required-tests reglen-in all-tests-registry)
  ;; At this point the list of parent tests is expanded 
  ;; NB// Should expand items here and then insert into the run queue.
  (debug:print 5 "test-records: " test-records ", flags: " (hash-table->alist flags))

  ;; Do mark-and-find clean up of db before starting runing of quue
  ;;
  ;; (cdb:remote-run db:find-and-mark-incomplete #f)

  (let ((run-info              (cdb:remote-run db:get-run-info #f run-id))
	(tests-info            (mt:get-tests-for-run run-id #f '() '())) ;;  qryvals: "id,testname,item_path"))
	(sorted-test-names     (tests:sort-by-priority-and-waiton test-records))
	(test-registry         (make-hash-table))
	(registry-mutex        (make-mutex))
	(num-retries           0)
	(max-retries           (config-lookup *configdat* "setup" "maxretries"))
	(max-concurrent-jobs   (let ((mcj (config-lookup *configdat* "setup"     "max_concurrent_jobs")))
				 (if (and mcj (string->number mcj))
				     (string->number mcj)
				     1))) ;; length of the register queue ahead
	(reglen                (if (number? reglen-in) reglen-in 1))
	(last-time-incomplete  (current-seconds)))

    ;; Initialize the test-registery hash with tests that already have a record
    ;; convert state to symbol and use that as the hash value
    (for-each (lambda (trec)
		(let ((id (db:test-get-id        trec))
		      (tn (db:test-get-testname  trec))
		      (ip (db:test-get-item-path trec))
		      (st (db:test-get-state     trec)))
		  (if (not (equal? st "DELETED"))
		      (hash-table-set! test-registry (runs:make-full-test-name tn ip) (string->symbol st)))))
	      tests-info)
    (set! max-retries (if (and max-retries (string->number max-retries))(string->number max-retries) 100))

    (let loop ((hed         (car sorted-test-names))
	       (tal         (cdr sorted-test-names))
	       (reg         '()) ;; registered, put these at the head of tal 
	       (reruns      '()))
      (if (not (null? reruns))(debug:print-info 4 "reruns=" reruns))

      ;; Here we mark any old defunct tests as incomplete. Do this every fifteen minutes
      ;; (if (> (current-seconds)(+ last-time-incomplete 900))
      ;;     (begin
      ;;       (set! last-time-incomplete (current-seconds))
      ;;       (cdb:remote-run db:find-and-mark-incomplete #f)))

      ;; (print "Top of loop, hed=" hed ", tal=" tal " ,reruns=" reruns)
      (let* ((test-record (hash-table-ref test-records hed))
	     (test-name   (tests:testqueue-get-testname test-record))
	     (tconfig     (tests:testqueue-get-testconfig test-record))
	     (jobgroup    (config-lookup tconfig "requirements" "jobgroup"))
	     (testmode    (let ((m (config-lookup tconfig "requirements" "mode")))
			    (if m (string->symbol m) 'normal)))
	     (waitons     (tests:testqueue-get-waitons    test-record))
	     (priority    (tests:testqueue-get-priority   test-record))
	     (itemdat     (tests:testqueue-get-itemdat    test-record)) ;; itemdat can be a string, list or #f
	     (items       (tests:testqueue-get-items      test-record))
	     (item-path   (item-list->path itemdat))
	     (tfullname   (runs:make-full-test-name test-name item-path))
	     (newtal      (append tal (list hed)))
	     (regfull     (>= (length reg) reglen)))

	(hash-table-set! *max-tries-hash* tfullname (+ (hash-table-ref/default *max-tries-hash* tfullname 0) 1))
	;; (debug:print 0 "max-tries-hash: " (hash-table->alist *max-tries-hash*))

	;; Ensure all top level tests get registered. This way they show up as "NOT_STARTED" on the dashboard
	;; and it is clear they *should* have run but did not.
	(if (not (hash-table-ref/default test-registry (runs:make-full-test-name test-name "") #f))
	    (begin
	      (cdb:tests-register-test *runremote* run-id test-name "")
	      (hash-table-set! test-registry (runs:make-full-test-name test-name "") 'done)))

	;; error
	(if (member test-name waitons)
	    (begin
	      (debug:print 0 "ERROR: test " test-name " has listed itself as a waiton, please correct this!")
	      (set! waiton (filter (lambda (x)(not (equal? x hed))) waitons))))

	(cond 
	 
	 ;; We want to catch tests that have waitons that are NOT in the queue and discard them IFF 
	 ;; they have been through the wringer 10 or more times
	 ((and (list? waitons)
	       (not (null? waitons))
	       (> (hash-table-ref/default *max-tries-hash* tfullname 0) 10)
	       (not (null? (filter
			    number?
			    (map (lambda (waiton)
				   (if (and (not (member waiton tal))            ;; this waiton is not in the list to be tried to run
					    (not (member waiton reruns)))
				       1
				       #f))
				 waitons))))) ;; could do this more elegantly with a marker....
	  (debug:print 0 "WARNING: Marking test " tfullname " as not runnable. It is waiting on tests that cannot be run. Giving up now.")
	  (hash-table-set! test-registry tfullname 'removed))

	 ;; items is #f then the test is ok to be handed off to launch (but not before)
	 ;; 
	 ((not items)
	  (debug:print-info 4 "OUTER COND: (not items)")
	  (if (and (not (tests:match test-patts (tests:testqueue-get-testname test-record) item-path required: required-tests))
		   (not (null? tal)))

	 ;; if items is a proc then need to run items:get-items-from-config, get the list and loop 
	 ;;    - but only do that if resources exist to kick off the job
	 ;; EXPAND ITEMS
	 ((or (procedure? items)(eq? items 'have-procedure))
	  (let ((can-run-more    (runs:can-run-more-tests jobgroup max-concurrent-jobs)))
	    (if (and (list? can-run-more)
		     (car can-run-more))
		(let ((loop-list (runs:expand-items hed tal reg reruns regfull newtal jobgroup max-concurrent-jobs run-id waitons item-path testmode test-record can-run-more items runname tconfig reglen test-registry test-records)))
		  (if loop-list
		      (apply loop loop-list)))
		;; if can't run more just loop with next possible test
		(loop (car newtal)(cdr newtal) reg reruns))))
	    
	 ;; this case should not happen, added to help catch any bugs
	 ((and (list? items) itemdat)

    (setenv "MT_ITEMPATH"  item-path)
    (setenv "MT_RUNNAME"   runname)
    (set-megatest-env-vars run-id inrunname: runname) ;; these may be needed by the launching process
    (change-directory *toppath*)

    ;; Here is where the test_meta table is best updated
    ;; Yes, another use of a global for caching. Need a better way?
    ;;
    ;; There is now a single call to runs:update-all-test_meta and this 
    ;; per-test call is not needed. Given the delicacy of the move to 
    ;; v1.55 this code is being left in place for the time being.
    ;;
    (if (not (hash-table-ref/default *test-meta-updated* test-name #f))
        (begin
	   (hash-table-set! *test-meta-updated* test-name #t)
           (runs:update-test_meta test-name test-conf)))
    
    ;; itemdat => ((ripeness "overripe") (temperature "cool") (season "summer"))
    (let* ((new-test-path (string-intersperse (cons test-path (map cadr itemdat)) "/"))
	   (test-id       (cdb:remote-run db:get-test-id-cached #f  run-id test-name item-path))
	   (testdat       (if test-id (cdb:get-test-info-by-id *runremote* test-id) #f)))
      (if (not testdat)
	  (let loop ()
	    ;; ensure that the path exists before registering the test
	    ;; NOPE: Cannot! Don't know yet which disk area will be assigned....
	    ;; (system (conc "mkdir -p " new-test-path))
	    ;;
	    ;; (open-run-close tests:register-test db run-id test-name item-path)
	    ;;
	    ;; NB// for the above line. I want the test to be registered long before this routine gets called!
	    ;;
	    (if (not test-id)(set! test-id (cdb:remote-run db:get-test-id-cached #f run-id test-name item-path)))
	    (if (not test-id)
		(begin
		  (debug:print 2 "WARN: Test not pre-created? test-name=" test-name ", item-path=" item-path ", run-id=" run-id)
		  (cdb:tests-register-test *runremote* run-id test-name item-path)
		  (set! test-id (cdb:remote-run db:get-test-id-cached #f run-id test-name item-path))))
	    (debug:print-info 4 "test-id=" test-id ", run-id=" run-id ", test-name=" test-name ", item-path=\"" item-path "\"")
	    (set! testdat (cdb:get-test-info-by-id *runremote* test-id))
	    (if (not testdat)
		(begin
		  (debug:print-info 0 "WARNING: server is overloaded, trying again in one second")
		  (thread-sleep! 1)
		  (loop)))))

	     (begin
	       (print "Updating " test-name " " fld " to " val)
	       (cdb:remote-run db:testmeta-update-field #f test-name fld val)))))
     '(("author" 2)("owner" 3)("description" 4)("reviewed" 5)("tags" 9)))))

;; Update test_meta for all tests
(define (runs:update-all-test_meta db)
  (let ((test-names (tests:get-all))) ;; (tests:get-valid-tests)))
    (for-each 
     (lambda (test-name)
       (let* ((test-conf    (mt:lazy-read-test-config test-name)))
	 ;; use the cdb:remote-run instead of passing in db
	 (if test-conf (runs:update-test_meta test-name test-conf))))
     (hash-table-keys test-names))))

;; This could probably be refactored into one complex query ...
(define (runs:rollup-run keys runname user keyvals)
  (debug:print 4 "runs:rollup-run, keys: " keys " :runname " runname " user: " user)
  (let* ((db              #f)
	 (new-run-id      (cdb:remote-run db:register-run #f keyvals runname "new" "n/a" user))
	 (prev-tests      (cdb:remote-run test:get-matching-previous-test-run-records db new-run-id "%" "%"))

;;======================================================================
;; Copyright 2006-2013, Matthew Welland.
;; 
;;  This program is made available under the GNU GPL version 2.0 or
;;  greater. See the accompanying file COPYING for details.
;; 
;;  This program is distributed WITHOUT ANY WARRANTY; without even the
;;  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
;;  PURPOSE.
;;======================================================================

;;======================================================================
;; Simple persistant strings lookup table. Keep out of the main db
;; so writes/reads don't slow down central access.
;;======================================================================

(require-extension (srfi 18) extras)
(use sqlite3 srfi-1 posix regex regex-case srfi-69 csv-xml s11n md5 message-digest base64)
(import (prefix sqlite3 sqlite3:))
(import (prefix base64 base64:))

(declare (unit sdb))

;; 
(define (sdb:open) ;;  (conc *toppath* "/megatest.db") (car *configinfo*)))
  (if (not *toppath*)
      (if (not (setup-for-run))
	  (begin
	    (debug:print 0 "ERROR: Attempted to open db when not in megatest area. Exiting.")
	    (exit))))
  (let* ((dbpath    (conc *toppath* "/db/sdb.db")) ;; fname)
	 (dbexists  (let ((fe (file-exists? dbpath)))
		      (if fe 
			  fe
			  (begin
			    (create-directory (conc *toppath* "/db") #t)
			    #f))))
	 (sdb        (sqlite3:open-database dbpath))
	 (handler   (make-busy-timeout (if (args:get-arg "-override-timeout")
					   (string->number (args:get-arg "-override-timeout"))
					   136000))))
    (sqlite3:set-busy-handler! sdb handler)
    (if (not dbexists)
	(sdb:initialize sdb))
    (sqlite3:execute sdb "PRAGMA synchronous = 1;")
    sdb))

(define (sdb:initialize sdb)
  (sqlite3:execute sdb "CREATE TABLE IF NOT EXISTS strs
                           (id  INTEGER PRIMARY KEY,
                            str TEXT,
                        CONSTRAINT str UNIQUE (str));")
  (sqlite3:execute sdb "CREATE INDEX strindx ON strs (str);"))

;; (define sumup (let ((a 0))(lambda (x)(set! a (+ x a)) a)))

(define (sdb:register-string sdb str)
  (sqlite3:execute sdb "INSERT OR IGNORE INTO strs (str) VALUES (?);" str))

(define (sdb:string->id sdb str-cache str)
  (let ((id (hash-table-ref/default str-cache str #f)))
    (if (not id)
	(sqlite3:for-each-row
	 (lambda (sid)
	   (set! id sid)
	   (hash-table-set! str-cache str id))
	 sdb
	 "SELECT id FROM strs WHERE str=?;" str))
    id))

(define (sdb:id->string sdb id-cache id)
  (let ((str (hash-table-ref/default id-cache id #f)))
    (if (not str)
	(sqlite3:for-each-row
	 (lambda (istr)
	   (set! str istr)
	   (hash-table-set! id-cache id str))
	 sdb
	 "SELECT str FROM strs WHERE id=?;" id))
    str))

(define sdb:qry
  (let ((sdb    #f)
	(scache (make-hash-table))
	(icache (make-hash-table)))
    (lambda (cmd var)
      (if (not sdb)(set! sdb (sdb:open)))
      (case cmd
	((init)      (if (not sdb)(set! sdb (sdb:open))))
	((finalize!) (if sdb (sqlite3:finalize! sdb)))
	((getid)     (let ((id (sdb:string->id sdb scache var)))
		       (if id
			   id
			   (begin
			     (sdb:register-string sdb var)
			     (sdb:string->id sdb scache var)))))
	((getstr)    (if (or (number? var)
			     (string->number var))
			 (sdb:id->string sdb icache var)
			 var))
	(else #f)))))

     (lambda (testkeyname)
       (let* ((test-record (hash-table-ref testrecordshash testkeyname))
	      (test-name   (tests:testqueue-get-testname  test-record))
	      (itemdat     (tests:testqueue-get-itemdat   test-record))
	      (item-path   (tests:testqueue-get-item_path test-record))
	      (waitons     (tests:testqueue-get-waitons   test-record))
	      (keep-test   #t)
	      (test-id     (cdb:remote-run db:get-test-id-cached #f run-id test-name item-path))
	      (tdat        (cdb:remote-run db:get-testinfo-state-status #f test-id))) ;; (cdb:get-test-info-by-id *runremote* test-id)))
	 (if tdat
	     (begin
	       ;; Look at the test state and status
	       (if (or (and (member (db:test-get-status tdat) 
				    '("PASS" "WARN" "WAIVED" "CHECK" "SKIP"))
			    (equal? (db:test-get-state tdat) "COMPLETED"))
		       (member (db:test-get-state tdat)
				    '("INCOMPLETE" "KILLED")))
		   (set! keep-test #f))

	       ;; examine waitons for any fails. If it is FAIL or INCOMPLETE then eliminate this test
	       ;; from the runnable list
	       (if keep-test
		   (for-each (lambda (waiton)
			       ;; for now we are waiting only on the parent test
			       (let* ((parent-test-id (cdb:remote-run db:get-test-id-cached #f run-id waiton ""))
				      (wtdat          (cdb:remote-run db:get-testinfo-state-status #f test-id))) ;; (cdb:get-test-info-by-id *runremote* test-id)))
				 (if (or (and (equal? (db:test-get-state wtdat) "COMPLETED")
					      (member (db:test-get-status wtdat) '("FAIL")))
					 (member (db:test-get-status wtdat)  '("KILLED"))
					 (member (db:test-get-state wtdat)   '("INCOMPETE")))
				 ;; (if (or (member (db:test-get-status wtdat)
				 ;;        	 '("FAIL" "KILLED"))
				 ;;         (member (db:test-get-state wtdat)

;;======================================================================
;; test steps
;;======================================================================

;; teststep-set-status! used to be here

(define (test-get-kill-request test-id) ;; run-id test-name itemdat)
  (let* ((testdat   (cdb:remote-run db:get-testinfo-state-status #f test-id))) ;; (cdb:get-test-info-by-id *runremote* test-id))) ;; run-id test-name item-path)))
    (and testdat
	 (equal? (test:get-state testdat) "KILLREQ"))))

(define (test:tdb-get-rundat-count tdb)
  (if tdb
      (let ((res 0))
	(sqlite3:for-each-row

	  
(define (tests:set-partial-meta-info db test-id run-id minutes work-area)
  ;; DOES cdb:remote-run under the hood!
  (let* ((cpuload  (get-cpu-load))
	 (diskfree (get-df (current-directory))))
    (tests:update-testdat-meta-info db test-id work-area cpuload diskfree minutes)
    ;; Update central with uname and hostname = #f
    ;; Is this one of the performance problems? This info should come from testdat-meta anyway
    ;; (tests:update-central-meta-info test-id cpuload diskfree minutes #f #f)
  ))
	 
(define (tests:update-testdat-meta-info db test-id work-area cpuload diskfree minutes)
  (let ((tdb         (db:open-test-db-by-test-id db test-id work-area: work-area)))
    (if (sqlite3:database? tdb)
	(begin
	  (sqlite3:execute tdb "INSERT INTO test_rundat (update_time,cpuload,diskfree,run_duration) VALUES (strftime('%s','now'),?,?,?);"
			   cpuload diskfree minutes)
	  (sqlite3:finalize! tdb))
	(debug:print 2 "Can't update testdat.db for test " test-id " read-only or non-existant"))))
    
(define (tests:testdat-get-testinfo db test-id work-area)
   (let ((tdb         (db:open-test-db-by-test-id db test-id work-area: work-area))
	 (res         '()))
     (if (sqlite3:database? tdb)
	 (begin
	   (sqlite3:for-each-row
	    (lambda (update-time cpuload diskfree run-duration)
	      (set! res (cons (vector update-time cpuload diskfree run-duration) res)))
	    tdb
	    "SELECT update_time,cpuload,diskfree,run_duration FROM test_rundat ORDER BY update_time ASC;")
	   (sqlite3:finalize! tdb)))
     res))

;;======================================================================
;; A R C H I V I N G
;;======================================================================

(define (test:archive db test-id)
  #f)

(define (test:archive-tests db keynames target)
  #f)

#
# run some tests

BINPATH=$(shell readlink -m $(PWD)/../bin)
MEGATEST=$(BINPATH)/megatest
PATH := $(BINPATH):$(PATH)
RUNNAME := $(shell date +w%V.%u.%H.%M)
IPADDR := "-"

	cd fullrun;megatest -runtests % -target ubuntu/nfs/none :runname $(RUNNAME)_01 -testpatt %/,%/ai -debug $(DEBUG)
	cd fullrun;megatest -runtests %/,%/ai -target ubuntu/nfs/none :runname $(RUNAME)_02 -debug $(DEBUG)
	cd fullrun;megatest -runtests runfirst/%,%/ai -target ubuntu/nfs/none :runname $(RUNNAME)_02 -debug $(DEBUG)
	cd fullrun;megatest -runtests %/,%/winter -target ubuntu/nfs/none :runname $(RUNNAME)_03  -debug $(DEBUG)
	sleep 40;cd fullrun;megatest -target ubuntu/nfs/none :runname $(RUNNAME) -set-state-status COMPLETED,FORCED :state COMPLETED :status PASS -testpatt ez_p%s,runfirst/ -debug $(DEBUG) $(LOGGING)


test3 : fullprep test3a test3b

test3a :
	@echo Run runfirst and any waitons.
	cd fullrun;$(MEGATEST) -runtests runfirst -reqtarg ubuntu/nfs/none :runname $(RUNNAME)_b 

test3b :
	@echo Run all_toplevel and all waitons
	cd fullrun;$(MEGATEST) -runtests all_toplevel -reqtarg ubuntu/nfs/none :runname $(RUNNAME)_c

test4 : cleanprep
	@echo "WARNING: No longer running fullprep, test converage may be lessened"
	cd fullrun;time $(MEGATEST) -debug $(DEBUG) -runtests % -reqtarg ubuntu/nfs/none :runname $(RUNNAME)_b -m "This is a comment specific to a run" -v $(LOGGING)

# NOTE: Only one instance can be a server
test5 : cleanprep

test8 : test8a
	cd fullrun;$(MEGATEST) -runtests lineitem_fail 1 -target ubuntu/nfs/none :runname $(RUNNAME)_singletest
	cd fullrun;$(MEGATEST) -runtests runfirst/fall 1 -target ubuntu/nfs/none :runname $(RUNNAME)_singleitem
	cd fullrun;$(MEGATEST) -runtests test_mt_vars/2 -target ubuntu/nfs/none :runname $(RUNNAME)_singleitem_waiton

# Some simple checks for bootstrapping and run loop logic 

test9 : minsetup test9a test9b test9c test9d test9e

test9a :
	@echo Run super-simple mintest e, no waitons.
	cd mintest;megatest -runtests e -target $(VER) :runname `date +%H.%M.%S` -debug $(DEBUG)

test9b :
	@echo Run simple mintest d with one waiton c
	cd mintest;megatest -runtests d -target $(VER) :runname `date +%H.%M.%S` -debug $(DEBUG)

test9c :
	@echo Run mintest a with full waiton chain a -> b -> c -> d -> e
	cd mintest;megatest -runtests a -target $(VER) :runname `date +%H.%M.%S` -debug $(DEBUG)

test9d :
	@echo Run an itemized test with no items
	cd mintest;megatest -runtests g -target $(VER) :runname `date +%H.%M.%S` -debug $(DEBUG)

test9e :
	@echo Run mintest a1 with full waiton chain with d1fail: a1 -> b1 -> c1 -> d1fail -> e1
	cd mintest;megatest -runtests a1 -target $(VER) :runname `date +%H.%M.%S` -debug $(DEBUG)

test10 :
	@echo Run a bunch of different targets simultaneously
	(cd fullrun;$(MEGATEST) -server - ;sleep 2)&
	for targ in mint/btrfs/mintdir sunos/sshfs/loc; do \
	   (cd fullrun;$(MEGATEST) -runtests priority_10_waiton_1 -target $$targ :runname $(RUNNAME) &); done
	for sys in ubuntu suse redhat debian;do \
	  for fs in afs nfs zfs; do \

[setup]
testcopycmd cp --remove-destination -rlv TEST_SRC_PATH/. TEST_TARG_PATH/. >> TEST_TARG_PATH/mt_launch.log 2>> TEST_TARG_PATH/mt_launch.log
runqueue 20
# transport http
launchwait no

[include ../fdk.config]

[server]
port 9080

[setup]
# exectutable /path/to/megatest
max_concurrent_jobs 50

linktree #{getenv MT_RUN_AREA_HOME}/tmp/mt_links

[jobtools]
useshell yes
# ## launcher launches jobs, the job is managed on the target host
## by megatest, comment out launcher to run local
# workhosts localhost hermes
# launcher exec nbfake

launcher nbfake
# launcher echo

# launcher nbfind
# launcher nodanggood

## use "xterm -e csi -- " as a launcher to examine the launch environment.
## exit with (exit)
## get a shell with (system "bash")
# launcher xterm -e csi --

[setup]
# Set launchwait to no to use the more agressive code that does not wait for the launch to complete before proceeding
# this may save a few milliseconds on launching tests
# launchwait no

# Use http instead of direct filesystem access
transport http
# transport fs

# If set to "default" the old code is used. Otherwise defaults to 200 or uses
# numeric value given.
#
runqueue 20

# Default runtimelim 1d 1h 1m 10s
#
runtimelim 20m

# Deadtime - when to consider tests dead (i.e. haven't heard from them in too long)
# Number in seconds, set to 20 seconds here to trigger a little trouble. Default is
# 1800
#
deadtime 600

# It is possible (but not recommended) to override the rsync command used
# to populate the test directories. For test development the following 
# example can be useful
#
# testcopycmd cp --remove-destination -rsv TEST_SRC_PATH/. TEST_TARG_PATH/. >> TEST_TARG_PATH/mt_launch.log 2>> TEST_TARG_PATH/mt_launch.log

#!/bin/bash

for x in `cat all-db-procs.txt`;do
  cat > ~/.megatestrc <<EOF
(require-library trace)
(import trace)
(trace
$x
)
EOF
  fname=`echo "$x" | tr ':!>' '-_g'`
  megatest -runtests sqlitespeed,test2,ez% -target ubuntu/nfs/none :runname $fname > $fname.log
done 

;; (c) 2006,2007,2008,2009 Matthew Welland matt@kiatoa.com
;;  
;;   License GPL.

(define logbody "LogFileBody")

(define pass-specs '( ;; testname num-expected max-runtime
		     ("exit_0"		        1  20)
		     ("ezlog_fail_then_pass"    1  20)
		     ("ezlog_pass"	        1  20)
		     ("ez_pass"		        1  20)
		     ("lineitem_pass"	        1  20)
		     ("priority_1"	        1  20)
		     ("priority_10"	        1  20)
		     ("priority_10_waiton_1"    1  20)
		     ("priority_3"	        1  20)
		     ("priority_4"	        1  20)
		     ("priority_5"	        1  20)
		     ("priority_6"	        1  20)
		     ("priority_7"	        1  20)
		     ("priority_8"	        1  20)
		     ("priority_9"	        1  20)
		     ("runfirst"	        7  20)
		     ("singletest"	        1  20)
		     ("singletest2"	        1  20)
		     ("special"		        1  20)
		     ("sqlitespeed"	       10  20)
		     ("test1"		        1  20)
		     ("test2"		        6  20)
		     ("test_mt_vars"	        6  20)
		     ))

(define fail-specs '( ;; testname num-expected max-runtime
		     ("exit_1"		        1  20)
		     ("ez_exit2_fail"           1  20)
		     ("ez_fail"		        1  20)
		     ("ez_fail_quick"	        1  20)
		     ("ezlog_fail"	        1  20)
		     ("lineitem_fail"	        1  20)
		     ("logpro_required_fail"    1  20)
		     ("manual_example"	        1  20)
		     ("neverrun"	        1  20)))
		     
(define warn-specs   '(("ezlog_warn"	        1  20)))
(define nost-specs   '(("wait_no_items1"        1  20)
		       ("wait_no_items2"        1  20)
		       ("wait_no_items3"        1  20)
		       ("wait_no_items4"        1  20)
		       ("no_items"              1  20)))

(define (check-one-test estate estatus testname count runtime)
   (let* ((rxe      (regexp (conc "^\\s+Test: " testname "(\\(.*|\\s+)\\s+State: " estate "\\s+Status: " estatus "\\s+Runtime:\\s+(\\d+)s")))
	  (msg1     (conc testname " expecting count of " count))
	  (msg2     (conc testname " expecting runtime less than " runtime)))
     (expect:required in logbody = count msg1 rxe)
     ;;(expect:value    in logbody count < msg2 rxe)
     ))

;; Special cases
;;
(expect:ignore   in logbody >= 0  "all_toplevel may not yet be done" #/Test: all_toplevel/)
(expect:error    in logbody =  0  "tests left in RUNNING state"      #/State: RUNNING/)
(expect:required in logbody =  1  "priority_2 is KILLED"             #/Test: priority_2\s+State: KILLED\s+Status: FAIL/)
(expect:required in logbody =  1  "testxz has 1 NOT_STARTED test"    #/Test: testxz\s+State: NOT_STARTED/)
(expect:required in logbody = 29  "blocktestxz has 29 tests"         #/Test: blocktestxz/)

;; General cases
;;
(for-each 
 (lambda (testdat)
   (apply check-one-test "COMPLETED" "PASS" testdat))
 pass-specs)

(for-each 
 (lambda (testdat)
   (apply check-one-test "COMPLETED" "FAIL" testdat))
 fail-specs)

(for-each 
 (lambda (testdat)
   (apply check-one-test "COMPLETED" "WARN" testdat))
 warn-specs)

(for-each 
 (lambda (testdat)
   (apply check-one-test "NOT_STARTED" "n/a" testdat))
 nost-specs)

;; Catch all.
;;
(expect:error    in logbody = 0   "Tests not accounted for"     #/Test: /)


;; ;; define your hooks
;; (hook:first-error   "echo \"Error hook activated: #{escaped errmsg}\"")
;; (hook:first-warning "echo \"Got warning: #{escaped warnmsg}\"")
;; (hook:value "echo \"Value hook activated: expected=#{expected}, measured=#{measured}, tolerance=#{tolerance}, message=#{message}\"")
;; 
;; ;; first ensure your run at least started
;; ;;
;; (trigger "Init"     #/This is a header/)
;; (trigger "InitEnd"  #/^\s*$/)
;; (section "Init" "Init" "InitEnd")
;; 
;; (trigger "Body"     #/^.*$/) ;; anything starts the body
;; ;; (trigger "EndBody"  #/This had better never match/)
;; 
;; (section "Body"     "Body" "EndBody")
;; 
;; (trigger "Blah2"    #/^begin Blah2/)
;; (trigger "Blah2End" #/^end Blah2/)
;; (section "Blah2"    "Blah2" "Blah2End")
;; 
;; (expect:required in "Init"  = 1 "Header"      #/This is a header/)
;; (expect:required in "LogFileBody" > 0 "Something required but not found" #/This is required but not found/)
;; (expect:value    in "LogFileBody" 1.9 0.1 "Output voltage" #/Measured voltage output:\s*([\d\.\+\-e]+)v/)
;; (expect:value    in "LogFileBody" 0.5 0.1 "Output current" #/Measured output current:\s*([\d\.\+\-e]+)mA/)
;; (expect:value    in "LogFileBody" 110e9 2e9 "A big number (first)" #/Freq:\s*([\d\.\+\-e]+)\s+Hz/)
;; (expect:value    in "LogFileBody" 110e9 1e9 "A big number (second), hook not called" #/Freq:\s*([\d\.\+\-e]+)Hz/)
;; (expect:value    in "LogFileBody" 110e9 1e9 "A big number (never activated)" #/Freq:\s*([\d\.\+\-e]+)zH/)
;; 
;; ;; Using match number
;; (expect:value    in "LogFileBody" 1.9 0.1 "Time Voltage" #/out: (\d+)\s+(\d+)/ match: 2)
;; 
;; ;; Comparison instead of tolerance
;; (expect:value    in "LogFileBody" 1.9 >   "Time voltage" #/out: (\d+)\s+(\d+)/ match: 2)
;; 
;; (expect:ignore   in "Blah2" < 99 "FALSE ERROR" #/ERROR/)
;; (expect:ignore   in "Body"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
;; (expect:warning  in "Body"  = 0 "Any warning" #/WARNING/)
;; (expect:error    in "Body"  = 0 "ERROR BLAH"  (list #/ERROR/ #/error/)) ;; but disallow any other errors
;; 
;; ;(expect in "Init"  < 1 "Junk"        #/This is bogus/)

[ezsteps]
listfiles ls

[items]
FOO

[test_meta]
author matt
owner  bob
description This test runs a single ezstep which is expected to pass \
but there is an items definition with no items. This should evoke an \
error.

tags first,single
reviewed 09/10/2011, by Matt

[ezsteps]
listfiles ls

[requirements]
waiton no_items

[items]

[test_meta]
author matt
owner  bob
description This test runs a single ezstep which is expected to pass \
but there is an items definition with no items. This should evoke an \
error.

tags first,single
reviewed 09/10/2011, by Matt

[ezsteps]
listfiles ls

[requirements]
waiton wait_no_items1

[items]

[test_meta]
author matt
owner  bob
description This test runs a single ezstep which is expected to pass \
but there is an items definition with no items. This should evoke an \
error.

tags first,single
reviewed 09/10/2011, by Matt

[ezsteps]
listfiles ls

[requirements]
waiton wait_no_items2

[items]

[test_meta]
author matt
owner  bob
description This test runs a single ezstep which is expected to pass \
but there is an items definition with no items. This should evoke an \
error.

tags first,single
reviewed 09/10/2011, by Matt

[ezsteps]
listfiles ls

[requirements]
waiton wait_no_items3

[items]

[test_meta]
author matt
owner  bob
description This test runs a single ezstep which is expected to pass \
but there is an items definition with no items. This should evoke an \
error.

tags first,single
reviewed 09/10/2011, by Matt

# Add steps here. Format is "stepname script"
[ezsteps]
step1 echo SUCCESS

[requirements]
waiton b1

# Add steps here. Format is "stepname script"
[ezsteps]
step1 echo SUCCESS

[requirements]
waiton c1

# Add steps here. Format is "stepname script"
[ezsteps]
step1 echo SUCCESS

[requirements]
waiton d1fail

# Add steps here. Format is "stepname script"
[ezsteps]
step1 echo SUCCESS
step2 exit 123

[requirements]
waiton e1

# Add steps here. Format is "stepname script"
[ezsteps]
step1 echo SUCCESS

[fields]
sysname TEXT
fsname TEXT
datapath TEXT

[setup]
transport #{scheme (if (getenv "USEHTTP") "http" "fs")}

max_concurrent_jobs 50

# It is possible (but not recommended) to override the rsync command used
# to populate the test directories. For test development the following 
# example can be useful
#
testcopycmd cp --remove-destination -rsv TEST_SRC_PATH/. TEST_TARG_PATH/. >> TEST_TARG_PATH/mt_launch.log 2>> TEST_TARG_PATH/mt_launch.log

# FULL or 2, NORMAL or 1, OFF or 0
synchronous OFF

# override the logview command
#
logviewer (%MTCMD%) 2> /dev/null > /dev/null

# override the html viewer launch command
#
# htmlviewercmd firefox -new-window 
htmlviewercmd konqueror

[jobtools]
launcher nbfake

[server]

# If the server can't be started on this port it will try the next port until
# it succeeds
port 8080

# This server will keep running this number of hours after last access. 
# Three minutes is 0.05 hours
timeout 0.025

## disks are:
## name host:/path/to/area
## -or-
## name /path/to/area
[disks]
disk0 #{getenv MT_RUN_AREA_HOME}/tmp_run

[default]
SOMEVAR This should show up in SOMEVAR3

#!/bin/bash

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep $TEST_DELAY
  $MT_MEGATEST -step step$i :state end :status 0
done

exit 0

[setup]
runscript main.sh

[requirements]
priority 1

[items]
SETLOG 0 1
TEST_DELAY 0 1 2 3 4 5 6 7 8 9 10
ITERATIONS 0 1 2 3 4 5 6 7 8 9 10

[test_meta]
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

if [[ $KTYPE == "" ]]; then
  echo 'Using KTYPE=26'
  export KTYPE=26
else
  echo Using KTYPE=$KTYPE
fi

export CHICKEN_VERSION=4.8.0.5
export CHICKEN_BASEVER=4.8.0
if ! [[ -e chicken-${CHICKEN_VERSION}.tar.gz ]]; then 
    wget http://code.call-cc.org/releases/${CHICKEN_BASEVER}/chicken-${CHICKEN_VERSION}.tar.gz
fi 

BUILDHOME=$PWD
DEPLOYTARG=$BUILDHOME/deploy

if [[ $PREFIX == "" ]]; then
   PREFIX=$PWD/inst

#!/usr/bin/env bash

# Copyright 2012, Matthew Welland.
#
#  This program is made available under the GNU GPL version 2.0 or
#  greater. See the accompanying file COPYING for details.
#
#  This program is distributed WITHOUT ANY WARRANTY; without even the
#  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
#  PURPOSE.
#
# VERSION: 

# set -e
# set -u
# set -x

# Usage: mtrunscript scriptname params
#
#    Look for scriptname in this order
#
#       $MT_TEST_RUN_DIR/scripts => $MT_RUN_AREA_HOME/scripts 
#          => $MT_RUN_AREA_HOME/../scripts => $PATH
#
#    In each area look for the script with the name like this:
#
#       scriptname_$TARGET[1]_$TARGET[2]_...$TARGET[n]_$MT_TESTNAME_$MT_ITEMPATH(s#/#_)
#

echo "NOT IMPLEMENTED YET!"
exit

case "x$1" in 
    # repo
    xrep*)
    fsl_dbinit
    case "x$2" in 
	xhelp)
	fsl_help
	exit
	;;
	
        # repo get
	xget)
	hook_pre_repo_get "$@"
	fsl_repo_get $3 $4
	hook_post_repo_get "$@"
	exit
	;;

	xaddarea)
	fsl_add_area $3 $4
	exit
	;;
	
	xdroparea)
	fsl_remove_area $3
	exit
	;;

	xdbinit)
	fsl_dbinit
	exit
	;;

	xls|xlist)
	shift
	shift
	fsl_ls "$@"
	exit
	;;

	xcreate)
	hook_pre_repo_create
	fsl_repo_create $3 $4 $5 $6
	hook_post_repo_create
	exit
	;; 

	ximport)
	fsl_repo_import $3 $4 $5
	exit
	;;

	*)
	fsl_help
	exit
    esac
    ;;

    "xmv")
    if [ "x$2" = "x-f" ];then
	# echo "Force mode"
	fsl_force=1
	shift
	shift
        # change this to exec when happy!
        # fsl mv -f f1 [f2 f3...] targ
	fsl_mv "$@"
	# args=("$@")
	# echo $@  -> echo $@
        # use $# variable to print out
        # number of arguments passed to the bash script
	# echo Number of arguments passed: $#  -> echo Number of arguments passed: $#
	exit
    else
        # echo No force
	shift
	fsl_mv "$@"
	exit
    fi
    ;;

    xtim*)
    fsl_fork_find
    shift
    $FOSSILEXE timeline "$@" | sed -e :a -e '$!N;s/\n         / /;ta' -e 'P;D'
    exit
    ;;

    # leaves output needs to be niceified, no need for a function
    xle*)
    fsl_fork_find
    shift
    $FOSSILEXE leaves "$@" | sed -e :a -e '$!N;s/\n         / /;ta' -e 'P;D'
    exit
    ;;

    # changes and status
    xcha* | xstat*)
    fsl_fork_find
    fsl_conflicts "$@"
    rm -f $CONFLICT_FLAG_FILE
    exit
    ;;

    # ci/commit
    xci | xcom*)
    fsl_conflicts changes "$@"
    trap "$FOSSILUTIL releaselock $FSLUTIL_PARAMS" SIGINT
    # Set up for remote locking
    if [ ! -e $CONFLICT_FLAG_FILE ]; then
	rm -f $CONFLICT_FLAG_FILE
	read -p "ERROR: Conflicts detected. Type \"yes\" to continue: " -e ANSWER
	if [ $ANSWER = "yes" ]; then
	    $FOSSILUTIL commitlock $FSLUTIL_PARAMS
	    $FOSSILEXE "$@"
	    $FOSSILUTIL releaselock $FSLUTIL_PARAMS
	else
	    exit 1
	fi
    else
	$FOSSILUTIL commitlock $FSLUTIL_PARAMS
	$FOSSILEXE "$@"
	$FOSSILUTIL releaselock $FSLUTIL_PARAMS
    fi
    exit
    ;;

    xtag)
    case "x$2" in
	xadd | xcancel)
	$FOSSILEXE "$@"
	$FOSSILEXE sync
	exit
	;;
	
	*)
	$FOSSILEXE "$@"
	exit
	;;
    esac
    ;;

    # add mention of repo to help
    "xhelp")
    if [ $# -gt 1 ]; then
       case "x$2" in 
          xrepo)
          fsl_help
          exit
          ;;
          
          *)
          $FOSSILEXE "$@"
	  ;;

       esac
    else
       $FOSSILEXE help | sed -e 's/sync/sync        repo/'
    fi
    exit
    ;;

    xup* | xco)
    fsl_fork_find
    $FOSSILEXE "$@"
    exit
    ;;

esac	

exec $FOSSILEXE "$@"