Megatest

. Re-work the dbstruct data structure?
.. Move main.db to global?
.. [ run-id.db inmemdb last-mod last-read last-sync inuse ]
. Re-work all queries to use run-id to dereference server
. Open main.db directly in calls to -runtests etc. No need to talk remote?
. remove common:faux-lock

db:get-test-info-by-id
db:get-test-state-status-by-id
db:get-test-info - do a get id by name/item-path
    cache the id-
    use test id plus run id to get from cache
 
need to do db:get-test-info-db
look at html gen for items - rollup needs deduplication nonoverlap

;; cache write these with transaction
db:teststep-set-status!
db:test-set-top-process-id

;; called a lot, maybe from rollup?
db:get-all-state-status-counts-for-test

;; load to move from server to client
tests:summarize-items ;; appears to be on client
tests:summarize-tests

;; ;; speed up for common cases with a little logic
;; ;; NB// Ultimately this will be deprecated in deference to mt:test-set-state-status-by-id
;;
;;      NOTE: run-id is not used
;; ;;
(define (db:test-set-state-status dbstruct run-id test-id newstate newstatus newcomment)



  (db:with-db
   dbstruct
   run-id #t
   (lambda (dbdat db)
     (db:test-set-state-status-db db run-id test-id newstate newstatus newcomment))))

(define (db:test-set-state-status-db db run-id test-id newstate newstatus newcomment)
  ;; clear cache after this, I think that makes sense
  (cond
   ((and newstate newstatus newcomment)
    (sqlite3:execute db "UPDATE tests SET state=?,status=?,comment=? WHERE id=?;" newstate newstatus newcomment ;; (sdb:qry 'getid newcomment)
		     test-id))
   ((and newstate newstatus)
    (sqlite3:execute db "UPDATE tests SET state=?,status=? WHERE id=?;" newstate newstatus test-id))
   (else
    (if newstate   (sqlite3:execute db "UPDATE tests SET state=?   WHERE id=?;" newstate   test-id))
    (if newstatus  (sqlite3:execute db "UPDATE tests SET status=?  WHERE id=?;" newstatus  test-id))
    (if newcomment (sqlite3:execute db "UPDATE tests SET comment=? WHERE id=?;" newcomment ;; (sdb:qry 'getid newcomment)
				    test-id))))
  ;; (mt:process-triggers dbstruct run-id test-id newstate newstatus)) ;; NOTE: Moved into calling function
  (let* ((hash-key (cons run-id test-id)))
    (hash-table-delete! *db:get-test-info-by-id-cache* hash-key)
    (hash-table-delete! *db:get-test-state-status-by-id-cache* hash-key))
  )

;; NEW BEHAVIOR: Count tests running in all runs!
;;
(define (db:get-count-tests-running dbstruct run-id) ;; fastmode)
  (let* ((qry ;; (if fastmode
		;;   "SELECT count(id) FROM tests WHERE state in ('RUNNING','LAUNCHED','REMOTEHOSTSTART') AND NOT (uname = 'n/a' AND item_path = '') LIMIT 1;"

	 (begin
	   (debug:print-error 0 *default-log-port* "reception failed. Received \"" msg "\" but cannot translate it.")
           (print-call-chain (current-error-port))
	   msg))) ;; crude reply for when things go awry
    ((zmq nmsg)(with-input-from-string msg (lambda ()(deserialize))))
    (else msg))) ;; rpc
















;; state is the priority rollup of all states
;; status is the priority rollup of all completed statesfu
;;
;; if test-name is an integer work off that as test-id instead of test-name test-path
;;
(define (db:set-state-status-and-roll-up-items dbstruct run-id test-name item-path state status comment)
  ;; establish info on incoming test followed by info on top level test

                 (if (not (equal? item-path "")) ;; only roll up IF incoming test is an item
                     (let* ((state-status-counts (db:get-all-state-status-counts-for-test db run-id test-name item-path state status)) ;; item-path is used to exclude current state/status of THIS test
			    (state-statuses      (db:roll-up-rules state-status-counts state status))
                            (newstate            (car state-statuses))
                            (newstatus           (cadr state-statuses)))
		       (set! new-state-eh newstate)
		       (set! new-status-eh newstatus)
                       (debug:print 4 *default-log-port* "BB> tl-test-id="tl-test-id" ; "test-name":"item-path
				    " newstate="newstate" newstatus="newstatus" len(sscs)="(length state-status-counts)  " state-status-counts: "
				    (apply conc
					   (map (lambda (x)
						  (conc
                     				   (with-output-to-string (lambda () (pp (dbr:counts->alist x)))) " | "))
						state-status-counts))); end debug:print
		       (if tl-test-id
			   (db:test-set-state-status-db db run-id tl-test-id newstate newstatus #f)) ;; we are still in the transaction - must access the db and not the dbstruct

		    ;; NO NEED TO CALL set-state-status-and-roll-up-items HERE, THIS IS DONE IN set-state-status-and-roll-up-items called by tests:test-set-status!
		 )
              )


	      ;; for automated creation of the rollup html file this is a good place...
	      (if (not (equal? item-path ""))
		  (tests:summarize-items run-id test-id test-name #f))
	      ;; BUG was this meant to be the antecnt of the if above?
	      (tests:summarize-test run-id test-id)  ;; don't force - just update if no
              ;; Leave a .final-status file for the top level test
              (tests:save-final-status run-id test-id)
	      (rmt:update-run-stats run-id (rmt:get-raw-run-stats run-id))) ;; end of let*

	    (mutex-unlock! m)
            (launch:end-of-run-check run-id )

    (debug:print-info 0 *default-log-port* "TRIGGERED on " trigger ", running command " fullcmd " output at " (get-environment-variable "NBFAKE_LOG"))
    (process-run fullcmd)
    (if prev-nbfake-log
	(setenv "NBFAKE_LOG" prev-nbfake-log)
	(unsetenv "NBFAKE_LOG"))
    ))

(define (mt:process-triggers run-id test-id newstate newstatus)
  (if test-id 
      (let* ((test-dat      (rmt:get-test-info-by-id run-id test-id)))
	(if test-dat
	    (let* ((test-rundir   (db:test-get-rundir       test-dat)) ;; ) ;; )
		   (test-name     (db:test-get-testname     test-dat))
		   (item-path     (db:test-get-item-path    test-dat))
		   (duration      (db:test-get-run_duration test-dat))
		   (comment       (db:test-get-comment      test-dat))
		   (event-time    (db:test-get-event_time   test-dat))

(define (mt:test-set-state-status-by-id run-id test-id newstate newstatus newcomment)
  (if (not (and run-id test-id))
      (begin
	(debug:print-error 0 *default-log-port* "bad data handed to mt:test-set-state-status-by-id, run-id=" run-id ", test-id=" test-id ", newstate=" newstate)
	(print-call-chain (current-error-port))
	#f)
      (begin









	(rmt:set-state-status-and-roll-up-items run-id test-id #f newstate newstatus newcomment)

	#t)))


(define (mt:test-set-state-status-by-id-unless-completed run-id test-id newstate newstatus newcomment)
  (let* ((test-vec   (rmt:get-testinfo-state-status run-id test-id))
         (state     (vector-ref test-vec 3)))
    (if (equal? state "COMPLETED")

  ;; (mt:process-triggers run-id test-id new-state new-status)
  #t);)
	;;(mt:test-set-state-status-by-id run-id test-id new-state new-status new-comment)))

(define (mt:test-set-state-status-by-testname-unless-completed run-id test-name item-path new-state new-status new-comment)
  (let ((test-id (rmt:get-test-id run-id test-name item-path)))
    (mt:test-set-state-status-by-id-unless-completed run-id test-id new-state new-status new-comment)))

;; state and status are extra hints not usually used in the calculation
;;
(define (rmt:set-state-status-and-roll-up-items run-id test-name item-path state status comment)
  (assert (number? run-id) "FATAL: Run id required.")
  (rmt:client-side-set-state-status-and-roll-up  run-id test-name item-path state status comment)
  ;; (rmtmod:send-receive 'set-state-status-and-roll-up-items run-id (list run-id test-name item-path state status comment))
  )

(define (rmt:client-side-set-state-status-and-roll-up  run-id test-name item-path state status comment)
  ;; establish info on incoming test followed by info on top level test
  ;; BBnote - for mode itemwait, linkage between upstream test & matching item status is propagated to run queue in db:prereqs-not-met
  (let* ((testdat      (if (number? test-name)
			   (rmt:get-test-info-by-id run-id test-name) ;; test-name is actually a test-id
			   (db:keep-trying-until-true ;; in our threaded stuff this call could happen before the test is registered (maybe?)
			    rmt:get-test-info
			    (list run-id test-name item-path)
			    10)))
	 (test-id      (db:test-get-id testdat))
	 (test-name    (if (number? test-name)
			   (db:test-get-testname testdat)
			   test-name))
	 (item-path    (db:test-get-item-path testdat))
         (tl-testdat   (rmt:get-test-info run-id test-name ""))
         (tl-test-id   (if tl-testdat
			   (db:test-get-id tl-testdat)
			   #f))
	 (new-state-eh #f)
	 (new-status-eh #f))
    (if (member state '("LAUNCHED" "REMOTEHOSTSTART")) 
	(rmt:general-call run-id 'set-test-start-time (list test-id)))
    (let* ((res (begin
		  (rmt:test-set-state-status-db run-id test-id state status comment) ;; this call sets the item state/status
		  (if (not (equal? item-path "")) ;; only roll up IF incoming test is an item
		      (let* ((state-status-counts (rmt:get-all-state-status-counts-for-test run-id test-name item-path state status)) ;; item-path is used to exclude current state/status of THIS test
			     (state-statuses      (db:roll-up-rules state-status-counts state status))
			     (newstate            (car state-statuses))
			     (newstatus           (cadr state-statuses)))
			(set! new-state-eh newstate)
			(set! new-status-eh newstatus)
			(debug:print 4 *default-log-port* "BB> tl-test-id="tl-test-id" ; "test-name":"item-path
				     " newstate="newstate" newstatus="newstatus" len(sscs)="(length state-status-counts)  " state-status-counts: "
				     (apply conc
					    (map (lambda (x)
						   (conc
						    (with-output-to-string (lambda () (pp (dbr:counts->alist x)))) " | "))
						 state-status-counts))); end debug:print
			(if tl-test-id
			    (rmt:test-set-state-status run-id tl-test-id newstate newstatus #f)) ;; we are still in the transaction - must access the db and not the dbstruct
		       )))))
      (mutex-unlock! *db-transaction-mutex*)
      (if (and test-id state status (equal? status "AUTO")) 
	  (rmt:test-data-rollup run-id test-id status))
      (if new-state-eh ;; moved from db:test-set-state-status
	  (mt:process-triggers run-id test-id new-state-eh new-status-eh))
      res)))

;;  select end_time-now from
;;      (select testname,item_path,event_time+run_duration as
;;                          end_time,strftime('%s','now') as now from tests where state in
;;      ('RUNNING','REMOTEHOSTSTART','LAUNCHED'));
;;
;; NOT EASY TO MIGRATE TO db{file,mod}
;;
(define (rmt:find-and-mark-incomplete-engine run-id ovr-deadtime cfg-deadtime test-stats-update-period)
  (let* ((incompleted '())
	 (oldlaunched '())
	 (toplevels   '())
          ;; The default running-deadtime is 720 seconds = 12 minutes.
          ;; "(running-deadtime-default (+ server-start-allowance (* 2 launch-monitor-period)))" = 200 + (2 * (200 + 30 + 30))
         (deadtime-trim (or ovr-deadtime cfg-deadtime))
         (server-start-allowance 200)
         (server-overloaded-budget 200)
         (launch-monitor-off-time (or test-stats-update-period 30))
         (launch-monitor-on-time-budget 30)
         (launch-monitor-period (+ launch-monitor-off-time launch-monitor-on-time-budget server-overloaded-budget))
         (remotehoststart-deadtime-default (+ server-start-allowance server-overloaded-budget 30))
         (remotehoststart-deadtime (or deadtime-trim remotehoststart-deadtime-default))
         (running-deadtime-default (+ server-start-allowance (* 2 launch-monitor-period)))
         (running-deadtime (or deadtime-trim running-deadtime-default))) ;; two minutes (30 seconds between updates, this leaves 3x grace period)

    (debug:print-info 4  *default-log-port* "running-deadtime = " running-deadtime)
    (debug:print-info 4  *default-log-port* "deadtime-trim = " deadtime-trim)

    (let* ((dat (rmt:get-toplevels-and-incompletes run-id running-deadtime remotehoststart-deadtime)))
      (set! oldlaunched (list-ref dat 1))
      (set! toplevels   (list-ref dat 2))
      (set! incompleted (list-ref dat 0)))

    (debug:print-info 18 *default-log-port* "Found " (length oldlaunched) " old LAUNCHED items, "
		      (length toplevels) " old LAUNCHED toplevel tests and "
		      (length incompleted) " tests marked RUNNING but apparently dead.")
  
    ;; These are defunct tests, do not do all the overhead of set-state-status. Force them to INCOMPLETE.
    ;;
    ;; (db:delay-if-busy dbdat)
    (let* ((min-incompleted-ids (map car incompleted)) ;; do 'em all
	   (all-ids             (append min-incompleted-ids (map car oldlaunched))))
      (if (> (length all-ids) 0)
	  (begin
	    ;; (launch:is-test-alive "localhost" 435)
	    (debug:print 0 *default-log-port* "WARNING: Marking test(s); " (string-intersperse (map conc all-ids) ", ")
			 " as DEAD")
	    (for-each
             (lambda (test-id)
               (let* ((tinfo   (rmt:get-test-info-by-id run-id test-id))
		      (run-dir (db:test-get-rundir     tinfo))
		      (host    (db:test-get-host       tinfo))
		      (pid     (db:test-get-process_id tinfo))
		      (result (rmt:get-status-from-final-status-file run-dir)))
		 (if (and (list? result) (> (length result) 1) (equal? "PASS" (cadr result)) (equal? "COMPLETED" (car result))) 
		     (begin
		       (debug:print 0 *default-log-port* "INFO: test " test-id " actually passed, so marking PASS not DEAD")
		       (rmt:set-state-status-and-roll-up-items
			run-id test-id 'foo "COMPLETED" "PASS"
			"Test stopped responding but it has PASSED; marking it PASS in the DB."))
		     (let ((is-alive (and (not (eq? pid 0))  ;; 0 is default in re-used field "attemptnum" where pid stored.
					  (commonmod:is-test-alive host pid))))
		       (if is-alive
			   (debug:print 0 *default-log-port* "INFO: test " test-id " on host " host
					" has a process on pid " pid ", NOT setting to DEAD.")
			   (begin
			     (debug:print 0 *default-log-port* "INFO: test " test-id
					  " final state/status is not COMPLETED/PASS. It is " result)
			     (rmt:set-state-status-and-roll-up-items
			      run-id test-id 'foo "COMPLETED" "DEAD"
			      "Test stopped responding while in RUNNING or REMOTEHOSTSTART; presumed dead.")))))))
	     ;; call end of eud of run detection for posthook - from merge, is it needed?
	     ;; (launch:end-of-run-check run-id)
	     all-ids)
	    )))))





(define (mt:lazy-read-test-config test-name)
  (let ((tconf (hash-table-ref/default *testconfigs* test-name #f)))
    (if tconf
	tconf
	(let ((test-dirs (tests:get-tests-search-path *configdat*)))
	  (let loop ((hed (car test-dirs))
		     (tal (cdr test-dirs)))

  (assert (number? run-id) "FATAL: Run id required.")
  (rmt:send-receive 'get-count-tests-running-in-jobgroup run-id (list run-id jobgroup)))

(define (rmt:set-state-status-and-roll-up-run run-id state status)
  (assert (number? run-id) "FATAL: Run id required.")
  (rmt:send-receive 'set-state-status-and-roll-up-run run-id (list run-id state status)))

;; run on client version of set-state-status-and-roll-up-run

(define (rmt:update-pass-fail-counts run-id test-name)
  (assert (number? run-id) "FATAL: Run id required.")
  (rmt:general-call 'update-pass-fail-counts run-id test-name test-name test-name))

(define (rmt:top-test-set-per-pf-counts run-id test-name)
  (assert (number? run-id) "FATAL: Run id required.")

  (assert (number? run-id) "FATAL: Run id required.")
  (rmtmod:send-receive 'synchash-get run-id (list run-id proc synckey keynum params)))

(define (rmt:get-tests-for-run-mindata run-id testpatt states status not-in)
  (assert (number? run-id) "FATAL: Run id required.")
  (rmtmod:send-receive 'get-tests-for-run-mindata run-id (list run-id testpatt states status not-in)))
  







;;======================================================================
;; Maintenance
;;======================================================================


(define (rmt:get-toplevels-and-incompletes run-id running-deadtime remotehoststart-deadtime)
  (rmtmod:send-receive 'get-toplevels-and-incompletes run-id (list run-id running-deadtime remotehoststart-deadtime)))

(define (rmt:get-status-from-final-status-file run-dir)
  (let ((infile (conc run-dir "/.final-status")))
    ;; first verify we are able to write the output file
    (if (not (file-read-access? infile))
        (begin 
	  (debug:print 2 *default-log-port* "ERROR: cannot read " infile)
          (debug:print 2 *default-log-port* "ERROR: run-dir is " run-dir)
          #f
          )
        (with-input-from-file infile read-lines)
	)))
  


























)