Megatest

;;======================================================================
;; S T A T E S   A N D   S T A T U S E S
;;======================================================================

;; BBnote: *common:std-states* - dashboard filter control and test control state buttons defined here; used in set-fields-panel and dboard:make-controls
(define *common:std-states*   ;; for toggle buttons in dashboard
  '(
    (0 "ARCHIVED")
    (1 "STUCK")
    (2 "KILLREQ")
    (3 "KILLED")
    (4 "NOT_STARTED")
    (5 "COMPLETED")
    (6 "LAUNCHED")
    (7 "REMOTEHOSTSTART")

       (let ((tr-res
              (sqlite3:with-transaction
               db
               (lambda ()
                 ;; NB// Pass the db so it is part fo the transaction
                 (db:test-set-state-status db run-id test-id state status comment) ;; this call sets the item state/status
                 (if (not (equal? item-path "")) ;; only roll up IF incoming test is an item
                     (let* ((state-status-counts  (db:get-all-state-status-counts-for-test dbstruct run-id test-name item-path state status)) ;; item-path is used to exclude current state/status of THIS test
                            (running              (length (filter (lambda (x)
                                                                    (member (dbr:counts-state x) *common:running-states*))
                                                                  state-status-counts)))
                            (bad-not-started      (length (filter (lambda (x)
                                                                    (and (equal? (dbr:counts-state x) "NOT_STARTED")
                                                                         (not (member (dbr:counts-status x)
                                                                                      *common:not-started-ok-statuses*))))
								  state-status-counts)))
                            ;; (non-completes        (filter (lambda (x)
                            ;;                                 (not (equal? (dbr:counts-state x) "COMPLETED")))
                            ;;                               state-status-counts))
                            (all-curr-states      (common:special-sort  ;; worst -> best (sort of)
                                                       (delete-duplicates
                                                        (if (not (equal? state "DELETED"))
                                                            (cons state (map dbr:counts-state state-status-counts))
                                                            (map dbr:counts-state state-status-counts)))
                                                       *common:std-states* >))
                            (all-curr-statuses    (common:special-sort  ;; worst -> best
                                                   (delete-duplicates
                                                    (if (not (equal? state "DELETED"))
                                                        (cons status (map dbr:counts-status state-status-counts))
                                                        (map dbr:counts-status state-status-counts)))
                                                   *common:std-statuses* >))
			    (non-completes     (filter (lambda (x)
							 (not (member x '("DELETED" "COMPLETED"))))
						       all-curr-states))
			    (preq-fails        (filter (lambda (x)
							 (equal? x "PREQ_FAIL"))
						       all-curr-statuses))
                            (num-non-completes (length non-completes))
                            (newstate          (cond
						((> running 0)           "RUNNING")            ;; anything running, call the situation running

                                                 "PREQ_FAIL")
                                                ((or (> bad-not-started 0)
                                                     (and (equal? newstate "NOT_STARTED")
                                                          (> num-non-completes 0)))
                                                 "STARTED")
                                                (else
                                                 (car all-curr-statuses)))))

                       (debug:print-info 2 *default-log-port*
                                         "\n--> probe db:set-state-status-and-roll-up-items: "
                                         "\n--> state-status-counts: "(map dbr:counts->alist state-status-counts)
                                         "\n--> running:             "running
                                         "\n--> bad-not-started:     "bad-not-started
                                         "\n--> non-non-completes:   "num-non-completes
                                         "\n--> non-completes:       "non-completes
                                         "\n--> all-curr-states:     "all-curr-states
                                         "\n--> all-curr-statuses:     "all-curr-statuses
                                         "\n--> newstate              "newstate
                                         "\n--> newstatus            "newstatus
                                         "\n\n")

                       ;; (print "bad-not-supported: " bad-not-support " all-curr-states: " all-curr-states " all-curr-statuses: " all-curr-states)
                       ;;      " newstate: " newstate " newstatus: " newstatus)
                       ;; NB// Pass the db so it is part of the transaction
                       (debug:print 4 *default-log-port* "BB> tl-test-id="tl-test-id" ; "test-name":"item-path"> bad-not-started="bad-not-started" newstate="newstate" newstatus="newstatus" num-non-completes="num-non-completes" non-completes="non-completes "len(sscs)="(length state-status-counts)  " state-status-counts: "
                                    (apply conc
                                           (map (lambda (x)
                                                  (conc
                                                   (with-output-to-string (lambda () (pp (dbr:counts->alist x)))) " | "))
                                                state-status-counts))
                                    
                                    ); end debug:print
                       (if tl-test-id
			   (db:test-set-state-status db run-id tl-test-id newstate newstatus #f)) ;; we are still in the transaction - must access the db and not the dbstruct
		       ))))))
                           
         (mutex-unlock! *db-transaction-mutex*)
         (if (and test-id state status (equal? status "AUTO")) 
             (db:test-data-rollup dbstruct run-id test-id status))
         tr-res)))))
;; BBnote: db:get-all-state-status-counts-for-test returns dbr:counts object aggregating state and status of items of a given test, *not including rollup state/status*
(define (db:get-all-state-status-counts-for-test dbstruct run-id test-name item-path item-state-in item-status-in)


  (let* ((test-info   (db:get-test-info dbstruct run-id test-name item-path))
         (item-state  (or item-state-in (db:test-get-state test-info))) 
         (item-status (or item-status-in (db:test-get-status test-info)))
         (other-items-count-recs (db:with-db
                                  dbstruct #f #f
                                  (lambda (db)
                                    (sqlite3:map-row
                                     (lambda (state status count)
                                       (make-dbr:counts state: state status: status count: count))
                                     db
                                     ;; ignore current item because we have changed its value in the current transation so this select will see the old value.
                                     "SELECT state,status,count(id) FROM tests WHERE run_id=? AND testname=? AND item_path != '' AND item_path !=? GROUP BY state,status;"
                                     run-id test-name item-path))))

         ;; add current item to tally outside of sql query
         (match-countrec-lambda (lambda (countrec) 
                                  (and (equal? (dbr:counts-state  countrec) item-state)
                                       (equal? (dbr:counts-status countrec) item-status))))

         (already-have-count-rec-list
          (filter match-countrec-lambda other-items-count-recs)) ;; will have either 0 or 1 count recs depending if another item shares this item's state/status
         
         (updated-count-rec    (if (null? already-have-count-rec-list)
                                   (make-dbr:counts state: item-state status: item-status count: 1)
                                   (let* ((our-count-rec (car already-have-count-rec-list))
                                          (new-count (add1 (dbr:counts-count our-count-rec))))
                                     (make-dbr:counts state: item-state status: item-status count: new-count))))

         (nonmatch-countrec-lambda (lambda (countrec) (not (match-countrec-lambda countrec))))
         
         (unrelated-rec-list   
          (filter nonmatch-countrec-lambda other-items-count-recs)))
    
    (cons updated-count-rec unrelated-rec-list)))

;; (define (db:get-all-item-states db run-id test-name)
;;   (sqlite3:map-row 
;;    (lambda (a) a)
;;    db
;;    "SELECT DISTINCT state FROM tests WHERE item_path != '' AND state != 'DELETED' AND run_id=? AND testname=?"
;;    run-id test-name))

		(begin
		  (print-call-chain *default-log-port*)
		  (debug:print 0 *default-log-port* "Message: " ((condition-property-accessor 'exn 'message) exn))
		  (debug:print 0 *default-log-port* "ERROR: failed to run post-hook " run-post-hook ", check the log " log-file))
	      (debug:print-info 0 *default-log-port* "running run-post-hook: \"" run-post-hook "\", log is " actual-logf)
	      (system (conc run-post-hook " >> " actual-logf " 2>&1"))
	      (debug:print-info 0 *default-log-port* "post-hook \"" run-post-hook "\" took " (- (current-seconds) start-time) " seconds to run."))))))

;; return #t when all items in waitors-upon list are represented in test-patt, #f otherwise.
(define (runs:testpatts-mention-waitors-upon? test-patt waitors-upon)
  (let* ((tests-in-testpatt
          (map
           (lambda (test-patt-item)
             (car (string-split test-patt-item "/")))
           (string-split test-patt ",")))
         (waitors-upon-not-mentioned (lset-difference equal? waitors-upon tests-in-testpatt)))
    (null? waitors-upon-not-mentioned)))

;;  test-names: Comma separated patterns same as test-patts but used in selection 
;;              of tests to run. The item portions are not respected.
;;              FIXME: error out if /patt specified
;;            
(define (runs:run-tests target runname test-patts user flags #!key (run-count 1)) ;; test-names
  (let* ((keys               (keys:config-get-fields *configdat*))
	 (keyvals            (keys:target->keyval keys target))
	 (run-id             (rmt:register-run keyvals runname "new" "n/a" user (args:get-arg "-contour")))  ;;  test-name)))
	 ;; (deferred          '()) ;; delay running these since they have a waiton clause
	 (runconfigf         (conc  *toppath* "/runconfigs.config"))
         (dbfile             (conc  *toppath* "/megatest.db"))
         (readonly-mode      (not (file-write-access? dbfile)))
	 (test-records       (make-hash-table))
	 ;; need to process runconfigs before generating these lists
	 (all-tests-registry #f)  ;; (tests:get-all)) ;; (tests:get-valid-tests (make-hash-table) test-search-path)) ;; all valid tests to check waiton names
	 (all-test-names     #f)  ;; (hash-table-keys all-tests-registry))
	 (test-names         #f)  ;; Generated by a call to (tests:filter-test-names all-test-names test-patts))
	 (required-tests     #f)  ;; Put fully qualified test/testpath names in this list to be done
         (waitors-upon       (make-hash-table)) ;; given a test, return list of tests waiting upon this test.
	 (task-key           (conc (hash-table->alist flags) " " (get-host-name) " " (current-process-id)))
	 ;; (tdbdat             (tasks:open-db))
	 (config-reruns      (let ((x (configf:lookup *configdat* "setup" "reruns")))
			       (if x (string->number x) #f)))
	 (allowed-tests      #f))

    ;; check if readonly

    ;; What happended, this code is now duplicated in tests!?
    ;;
    ;;======================================================================
    
    (if (not (null? test-names)) ;; BEGIN test-names loop
	(let loop ((hed (car test-names))   ;; NOTE: This is the main loop that iterates over the test-names
		   (tal (cdr test-names)))         ;; 'return-procs tells the config reader to prep running system but return a proc
          (debug:print-info 4 *default-log-port* "\n\ntestpatt elaboration loop => hed="hed " tal="tal" test-patts="test-patts" test-names="test-names)
	  (change-directory *toppath*) ;; PLEASE OPTIMIZE ME!!! I think this should be a no-op but there are several places where change-directories could be happening.
	  (setenv "MT_TEST_NAME" hed) ;; 
	  (let*-values (((waitons             waitors   config)
                         (tests:get-waitons   hed       all-tests-registry)))
	    (debug:print-info 8 *default-log-port* "waitons: " waitons)
	    ;; check for hed in waitons => this would be circular, remove it and issue an
	    ;; error
	    (if (or (member hed waitons)
		    (member hed waitors))
		(begin
		  (debug:print-error 0 *default-log-port* "test " hed " has listed itself as a waiton or waitor, please correct this!")
		  (set! waitons (filter (lambda (x)(not (equal? x hed))) waitons))
		  (set! waitors (filter (lambda (x)(not (equal? x hed))) waitors))))
	    
	    ;; (items   (items:get-items-from-config config)))
	    (if (not (hash-table-ref/default test-records hed #f)) ;; waiton-tconfig below will be #f until that test is visted here at least once
		(hash-table-set! test-records ;; BB: we are doing a manual make-tests:testqueue
				 hed (vector hed     ;; 0 ;; testname
					     config  ;; 1 
					     waitons ;; 2 
					     (config-lookup config "requirements" "priority")     ;; priority 3
					     (tests:get-items config) ;; 4 ;; expand the [items] and or [itemstable] into explict items
					     #f      ;; itemsdat 5
					     #f      ;; spare - used for item-path
					     waitors ;; 
					     )))
            ;; update waitors-upon here
            (for-each
             (lambda (waiton)
               (let* ((current-waitors-upon (hash-table-ref/default waitors-upon waiton '())))
                 (debug:print-info 8 *default-log-port* " current-waiters-upon["waiton"] is "current-waitors-upon )
                 (when (not (member hed current-waitors-upon))
                   (debug:print-info 8 *default-log-port* " current-waiters-upon["waiton"] << "hed  )
                   (hash-table-set! waitors-upon waiton (cons hed current-waitors-upon)))))
             (if (list? waitons) waitons '()))
            (debug:print-info 8 *default-log-port* " process waitons&waitors of "hed": "(delete-duplicates (append waitons waitors)))
            (for-each 
	     (lambda (waiton)
	       (if (and waiton (not (member waiton test-names)))
		   (let* ((waitors-in-testpatt (runs:testpatts-mention-waitors-upon? test-patts (hash-table-ref/default waitors-upon waiton '())))
                          (waiton-record   (hash-table-ref/default test-records waiton #f))
			  (waiton-tconfig  (if waiton-record (vector-ref waiton-record 1) #f))
			  (waiton-itemized (and waiton-tconfig
						(or (hash-table-ref/default waiton-tconfig "items" #f)
						    (hash-table-ref/default waiton-tconfig "itemstable" #f))))
			  (itemmaps        (tests:get-itemmaps config))  ;; (configf:lookup config "requirements" "itemmap"))
			  (new-test-patts  (tests:extend-test-patts test-patts hed waiton itemmaps))) ;; BB: items expanded here - chained-waiton goes awry by now.
		     (debug:print-info 0 *default-log-port* "Test " waiton " has " (if waiton-record "a" "no") " waiton-record and" (if waiton-itemized " " " no ") "items")
		     ;; need to account for test-patt here, if I am test "a", selected with a test-patt of "hed/b%"
		     ;; and we are waiting on "waiton" we need to add "waiton/,waiton/b%" to test-patt
		     ;; is this satisfied by merely appending "/" to the waiton name added to the list?
		     ;;
		     ;; This approach causes all of the items in an upstream test to be run 

		     ;; if we have this waiton already processed once we can analzye it for extending
		     ;; tests to be run, since we can't properly process waitons unless they have been
		     ;; initially added we add them again to be processed on second round AND add the hed
		     ;; back in to also be processed on second round
		     ;;
		     (if waiton-tconfig ;; BB: waiter should be in test-patts as well as the waiton have a tconfig.


                         (if waiton-itemized
                             (if waitors-in-testpatt
                                 (begin
                                   (debug:print-info 0 *default-log-port* "New test patts: " new-test-patts ", prev test patts: " test-patts)
                                   (set! test-names (cons waiton test-names)) ;; need to process this one, only add once the waiton tconfig read
                                   (set! required-tests (cons (conc waiton "/") required-tests))
                                   (set! test-patts new-test-patts))
                                 (begin
                                   (debug:print-info 0 *default-log-port* "Waitor(s) not yet on testpatt for " waiton ", setting up to re-process it")
                                   (set! tal (append (cons waiton tal)(list hed)))))
                             (begin
                               (debug:print-info 0 *default-log-port* "Adding non-itemized test " waiton " to required-tests")
                               (set! required-tests (cons waiton required-tests))
                               (set! test-patts new-test-patts)))
			 (begin
			   (debug:print-info 0 *default-log-port* "No testconfig info yet for " waiton ", setting up to re-process it")
			   (set! tal (append (cons waiton tal)(list hed))))) ;; (cons (conc waiton "/") required-tests))
			 
		     ;; NOPE: didn't work. required needs to be plain test names. Try tacking on to test-patts
		     ;;  - doesn't work
		     ;; (set! test-patts (conc test-patts "," waiton "/"))
		     
		     ;; (set! test-names (cons waiton test-names))))) ;; was an append, now a cons
		     )))
	     (delete-duplicates (append waitons waitors)))
	    (let ((remtests (delete-duplicates (append waitons tal))))
              (debug:print-info 8 *default-log-port* " remtests are "remtests)
	      (if (not (null? remtests))
		  (begin
		    ;; (debug:print-info 0 *default-log-port* "Preprocessing continues for " (string-intersperse remtests ", "))
		    (loop (car remtests)(cdr remtests)))))))) ;; END test-names loop

    (if (not (null? required-tests))
	(debug:print-info 1 *default-log-port* "Adding \"" (string-intersperse required-tests " ") "\" to the run queue"))

(define runs:nothing-left-in-queue-count 0)

;; return value of runs:expand-items is passed back to runs-tests-queue and is fed to named loop with this signature:
;;    (let loop ((hed         (car sorted-test-names))
;;	         (tal         (cdr sorted-test-names))
;;	         (reg         '()) ;; registered, put these at the head of tal 
;;	         (reruns      '()))

(define (runs:expand-items hed tal reg reruns regfull newtal jobgroup max-concurrent-jobs run-id waitons item-path testmode test-record can-run-more items runname tconfig reglen test-registry test-records itemmaps)
  (let* ((loop-list       (list hed tal reg reruns))
	 (prereqs-not-met (let ((res (rmt:get-prereqs-not-met run-id waitons hed item-path mode: testmode itemmaps: itemmaps)))
			    (if (list? res)
				res
				(begin
				  (debug:print 0 *default-log-port*

				  (let* ((modpatt (if itemmap (db:convert-test-itempath x itemmap) x)) 
					 (newpatt (conc waiton-test "/" (substring modpatt waiting-test-len (string-length modpatt)))))
				    ;; (conc waiting-test "/," waiting-test "/" (substring modpatt waiton-test-len (string-length modpatt)))))
				    ;; (print "in map, x=" x ", newpatt=" newpatt)
				    newpatt))
				(filter (lambda (x)
					  (eq? (substring-index (conc waiting-test "/") x) 0)) ;; is this patt pertinent to the waiting test
					patts)))
         (extended-test-patt   (append patts (if (null? patts-waiton)
                                     (list (conc waiton-test "/%")) ;; really shouldn't add the waiton forcefully like this
                                     patts-waiton)))
         (extended-test-patt-with-toplevels
          (fold (lambda (testpatt-item accum )
                  (let ((my-match (string-match "^([^%\\/]+)\\/.+$" testpatt-item)))
                    (cons testpatt-item
                          (if my-match
                              (cons
                               (conc (cadr my-match) "/")
                               accum)
                              accum))))
                '()
                extended-test-patt)))
    (string-intersperse (delete-duplicates extended-test-patt-with-toplevels) ",")))


  
;; tests:glob-like-match 
(define (tests:glob-like-match patt str) 
  (let ((like (substring-index "%" patt)))
    (let* ((notpatt  (equal? (substring-index "~" patt) 0))