Megatest

;;
(define (common:watchdog)
  (thread-sleep! 0.05) ;; delay for startup
  (let ((legacy-sync (common:run-sync?))
	(debug-mode  (debug:debug-mode 1))
	(last-time   (current-seconds))
        (this-wd-num     (begin (mutex-lock! *wdnum*mutex) (let ((x *wdnum*)) (set! *wdnum* (add1 *wdnum*)) (mutex-unlock! *wdnum*mutex) x))))
    (debug:print-info 3 *default-log-port* "watchdog starting. legacy-sync is " legacy-sync" pid="(current-process-id)" this-wd-num="this-wd-num)
    (if (and legacy-sync (not *time-to-exit*))
	(let* ((dbstruct (db:setup))
	       (mtdb     (dbr:dbstruct-mtdb dbstruct))
	       (mtpath   (db:dbdat-get-path mtdb)))
	  (debug:print-info 0 *default-log-port* "Server running, periodic sync started.")
	  (let loop ()
	    ;; sync for filesystem local db writes

	 (string-split patts ","))
	res)
      #t))

;; (map print (map car (hash-table->alist (read-config "runconfigs.config" #f #t))))
(define (common:get-runconfig-targets #!key (configf #f))
  (let ((targs       (sort (map car (hash-table->alist
				     (or configf ;; NOTE: There is no value in using runconfig:read here.
					 (read-config (conc *toppath* "/runconfigs.config")
						      #f #t)
					 (make-hash-table))))
			   string<?))
	(target-patt (args:get-arg "-target")))
    (if target-patt
	(filter (lambda (x)

(define (calc-allow-system allow-system section sections)
  (if sections
      (and (or (equal? "default" section)
	       (member section sections))
	   allow-system) ;; account for sections and return allow-system as it might be a symbol such as return-strings
      allow-system))
    
;; given a config hash and a section name, apply that section to all matching sections (using wildcard % or regex if /..../)
;; remove the section when done so that there is no downstream clobbering
;;
(define (configf:apply-wildcards ht section-name)
  (if (hash-table-exists? ht section-name)
      (let ((vars (hash-table-ref ht section-name))
            (rx   (regexp (if (string-contains section-name "%")
                              (string-substitute section-name "%" ".*")
                              section-name))))
        (for-each
         (lambda (section)
           (if (and section-name
                    section 
                    (not (string=? section-name section))
                    (string-match rx section))
               (for-each
                (lambda (bundle)
                  (let ((key  (car bundle))
                        (val  (cadr bundle))
                        (meta (if (> (length bundle) 2)(caddr bundle) #f)))
                    (hash-table-set! ht section (config:assoc-safe-add (hash-table-ref ht section) key val metadata: meta))))
                vars)))
         (hash-table-keys ht))))
  ht)

;; read a config file, returns hash table of alists

;; read a config file, returns hash table of alists
;; adds to ht if given (must be #f otherwise)
;; envion-patt is a regex spec that identifies sections that will be eval'd
;; in the environment on the fly
;; sections: #f => get all, else list of sections to gather
;; post-section-procs alist of section-pattern => proc, where: (proc section-name next-section-name ht curr-path)
;; apply-wildcards: #t/#f - apply vars from targets with % wildcards to all matching sections
;;
(define (read-config path ht allow-system #!key (environ-patt #f)(curr-section #f)(sections #f)(settings (make-hash-table))(keep-filenames #f)(post-section-procs '())(apply-wildcards #t))
  (debug:print-info 5 *default-log-port* "read-config " path " allow-system " allow-system " environ-patt " environ-patt " curr-section: " curr-section " sections: " sections " pwd: " (current-directory))
  (debug:print 9 *default-log-port* "START: " path)
  (if (and (not (port? path))
	   (not (file-exists? path))) ;; for case where we are handed a port
      (begin 
	(debug:print-info 1 *default-log-port* "read-config - file not found " path " current path: " (current-directory))
	;; WARNING: This is a risky change but really, we should not return an empty hash table if no file read?
	#f) ;; (if (not ht)(make-hash-table) ht))
      (let ((inp        (if (string? path)
			    (open-input-file path)
			      path)) ;; we can be handed a port
	    (res        (if (not ht)(make-hash-table) ht))
	    (metapath   (if (or (debug:debug-mode 9)
				keep-filenames)
			    path #f))
            (process-wildcards  (lambda (res curr-section-name)
                                  (if (and apply-wildcards
                                           (or (string-contains curr-section-name "%")   ;; wildcard
                                               (string-match "/.*/" curr-section-name))) ;; regex
                                      (begin
                                        (configf:apply-wildcards res curr-section-name)
                                        (hash-table-delete! res curr-section-name))))))  ;; NOTE: if the section is a wild card it will be REMOVED from res 
	(let loop ((inl               (configf:read-line inp res (calc-allow-system allow-system curr-section sections) settings)) ;; (read-line inp))
		   (curr-section-name (if curr-section curr-section "default"))
		   (var-flag #f);; turn on for key-var-pr and cont-ln-rx, turn off elsewhere
		   (lead     #f))
	  (debug:print-info 8 *default-log-port* "curr-section-name: " curr-section-name " var-flag: " var-flag "\n   inl: \"" inl "\"")
	  (if (eof-object? inl) 
	      (begin
                ;; process last section for wildcards
                (process-wildcards res curr-section-name)
		(if (string? path) ;; we received a path, not a port, thus we are responsible for closing it.
		    (close-input-port inp))
		(hash-table-delete! res "") ;; we are using "" as a dumping ground and must remove it before returning the ht
		(debug:print 9 *default-log-port* "END: " path)
		res)
	      (regex-case 
	       inl 

							(for-each 
							 (lambda (dat)
							   (let ((patt (car dat))
								 (proc (cdr dat)))
							     (if (string-match patt curr-section-name)
								 (proc curr-section-name section-name res path))))
							 post-section-procs)
                                                        ;; after gathering the vars for a section and if apply-wildcards is true and if there is a wildcard in the section name process wildcards
                                                        ;; NOTE: we are processing the curr-section-name, NOT section-name.
                                                        (process-wildcards res curr-section-name)
							(loop (configf:read-line inp res (calc-allow-system allow-system curr-section-name sections) settings)
							      ;; if we have the sections list then force all settings into "" and delete it later?
							      (if (or (not sections) 
								      (member section-name sections))
								  section-name "") ;; stick everything into ""
							      #f #f)))
	       (configf:key-sys-pr ( x key cmd      ) (if (calc-allow-system allow-system curr-section-name sections)

				   ;; (conc ":" (car keyval) " " (cadr keyval)))
				   (cadr keyval))
				 keydat)
			    "/"))
	       (item-path  (db:test-get-item-path testdat))
	       ;; this next block was added to fix a bug where variables were
               ;; needed. Revisit this.
	       (runconfig  (let ((runconfigf (conc  *toppath* "/runconfigs.config"))) ;; no rush but it would be good to convert this call to use runconfig:read
	 		     (if (file-exists? runconfigf)
	 			 (handle-exceptions
                                   exn
                                   #f  ;; do nothing, just keep on trucking ....
                                   (setup-env-defaults runconfigf run-id (make-hash-table) keydat environ-patt: keystring))
	 			 (make-hash-table))))
	       (testconfig    (begin

  ;; Runs view
  ((buttondat         (make-hash-table)) : hash-table)  ;;     
  ((item-test-names  '())                : list)        ;; list of itemized tests
  ((run-keys          (make-hash-table)) : hash-table)
  (runs-matrix        #f)                               ;; used in newdashboard
  ((start-run-offset   0)                : number)      ;; left-right slider value
  ((start-test-offset  0)                : number)      ;; up-down slider value
  ((runs-btn-height    (or (configf:lookup *configdat* "dashboard" "btn-height") "x16")) : string)  ;; was 12
  ((runs-btn-fontsz    (or (configf:lookup *configdat* "dashboard" "btn-fontsz") "10")) : string)   ;; was 8
  ((runs-cell-width    (or (configf:lookup *configdat* "dashboard" "cell-width") "60")) : string)   ;; was 50
  ((all-test-names     '())              : list)
  
  ;; Canvas and drawing data
  (cnv                #f)
  (cnv-obj            #f)

       #:orientation "HORIZONTAL"
       #:value 800
      (let* ((cnv-obj (iup:canvas 
		       ;; #:size "500x400"
		       #:expand "YES"
		       #:scrollbar "YES"
		       #:posx "0.5"
		       ;;#:posy "0.5"
		       #:action (make-canvas-action
				  (lambda (c xadj yadj)
				    (debug:catch-and-dump
				     (lambda ()
				       (if (not (dboard:tabdat-cnv tabdat))
					   (let ((cnv     (dboard:tabdat-cnv tabdat)))
					     (dboard:tabdat-cnv-set! tabdat c)

                                                                   (min (vector-ref (car dat) 2))
                                                                   (max (vector-ref (car dat) 2)))
                                                          (let* ((val    (vector-ref hed 2))
                                                                 (newmin (if (< val min) val min))
                                                                 (newmax (if (> val max) val max))
                                                                 (newres (cons val res)))
                                                            (if (null? tal)
                                                                (values (reverse res) (- newmin 2) (+ newmax 2))
                                                                (loop (car tal)(cdr tal) newres newmin newmax)))))))
                  (if (not (hash-table-exists? graph-matrix-table fieldn))
                      (begin
                        (let* ((graph-color-rgb (vg:generate-color-rgb))
                               (graph-color (vg:iup-color->number graph-color-rgb))
                               (graph-matrix-col (dboard:tabdat-graph-matrix-col tabdat))
                               (graph-matrix-row (dboard:tabdat-graph-matrix-row tabdat))

</div>
</div>
</div>
<div id="footnotes"><hr></div>
<div id="footer">
<div id="footer-text">
Version 1.0<br>
Last updated 2016-12-12 13:03:08 PST
</div>
</div>
</body>
</html>

-------------------------
[items]
A a b c
B d e f
-------------------------

Then the config file would effectively appear to contain an items section
exactly like the output from the script. This is useful when dynamically
creating items, itemstables and other config structures. You can see the
expansion of the call by looking in the cached files (look in your linktree
for megatest.config and runconfigs.config cache files and in your test run
areas for the expanded and cached testconfig).

Wildcards and regexes in Targets

-------------------------
[a/2/b]
VAR1 VAL1

[a/%/b]
VAR1 VAL2
-------------------------

Will result in:

-------------------------
[a/2/b]
VAR1 VAL2
-------------------------

Can use either wildcard of "%" or a regular expression:

[/abc.*def/]

Disk Space Checks
^^^^^^^^^^^^^^^^^

Some parameters you can put in the [setup] section of megatest.config:

-------------------

			             mtconfig
				     environ-patt: "env-override"
				     given-toppath: toppath
				     pathenvvar: "MT_RUN_AREA_HOME"))
	     (first-rundat  (let ((toppath (if toppath 
					       toppath
					       (car first-pass))))
			      (read-config ;; (conc toppath "/runconfigs.config") ;; this should be converted to runconfig:read but it is non-trivial, leaving it for now.
			       (conc (if (string? toppath)
					 toppath
					 (get-environment-variable "MT_RUN_AREA_HOME"))
				     "/runconfigs.config")
			       *runconfigdat* #t 
			       sections: sections))))
	(set! *runconfigdat* first-rundat)

				    environ-patt: "env-override"
				    given-toppath: toppath
				    pathenvvar: "MT_RUN_AREA_HOME"))
		     (runconfigdat (begin     ;; this read of the runconfigs will see any adjustments made by re-reading megatest.config
				     (for-each (lambda (kt)
						 (setenv (car kt) (cadr kt)))
					       key-vals)
				     (read-config (conc toppath "/runconfigs.config") *runconfigdat* #t ;; consider using runconfig:read some day ...
						  sections: sections))))
		(if cancreate (configf:write-alist runconfigdat rccachef))
		(set! *runconfigdat* runconfigdat)
		(if cancreate (configf:write-alist *configdat* mtcachef))
		(if cancreate (set! *configstatus* 'fulldata))))
	    ;; no configs found? should not happen but let's try to recover gracefully, return an empty hash-table
	    (set! *configdat* (make-hash-table))
	    )))
     ;; else read what you can and set the flag accordingly
     (else
      (let* ((cfgdat   (find-and-read-config 
			(or (args:get-arg "-config") "megatest.config")
			environ-patt: "env-override"
			given-toppath: (get-environment-variable "MT_RUN_AREA_HOME")
			pathenvvar: "MT_RUN_AREA_HOME")))
	(if cfgdat
	    (let* ((toppath  (or (get-environment-variable "MT_RUN_AREA_HOME")(cadr cfgdat)))
		   (rdat     (read-config (conc toppath  ;; convert this to use runconfig:read!
						"/runconfigs.config") *runconfigdat* #t sections: sections)))
	      (set! *configinfo*   cfgdat)
	      (set! *configdat*    (car cfgdat))
	      (set! *runconfigdat* rdat)
	      (set! *toppath*      toppath)
	      (set! *configstatus* 'partial))
	    (begin

;; Always use two or four digit decimal
;; 1.01, 1.02...1.10,1.11,1.1101 ... 1.99,2.00..

(declare (unit megatest-version))

(define megatest-version 1.6307)

	       (sections (if target (list "default" target) #f))
	       (data     (begin
			   (setenv "MT_RUN_AREA_HOME" *toppath*)
			   (if key-vals
			       (for-each (lambda (kt)
					   (setenv (car kt) (cadr kt)))
					 key-vals))
			   ;; (read-config (conc *toppath* "/runconfigs.config") #f #t sections: sections))))
                           (runconfig:read (conc *toppath* "/runconfigs.config") target #f))))
	  (if (and rundir ;; have all needed variabless
		   (directory-exists? rundir)
		   (file-write-access? rundir))
	      (begin
		(configf:write-alist data cfgf)
		;; force re-read of megatest.config - this resolves circular references between megatest.config
		(launch:setup force: #t)

	;; keep this one local
	(cond
	 ((and (args:get-arg "-section")
	       (args:get-arg "-var"))
	  (let ((val (or (configf:lookup data (args:get-arg "-section")(args:get-arg "-var"))
			 (configf:lookup data "default" (args:get-arg "-var")))))
	    (if val (print val))))
	 ((or (not (args:get-arg "-dumpmode"))
              (string=? (args:get-arg "-dumpmode") "ini"))
	  (configf:config->ini data))
	 ((string=? (args:get-arg "-dumpmode") "sexp")
	  (pp (hash-table->alist data)))
	 ((string=? (args:get-arg "-dumpmode") "json")
	  (json-write data))


	 (else
	  (debug:print-error 0 *default-log-port* "-dumpmode of " (args:get-arg "-dumpmode") " not recognised")))
	(set! *didsomething* #t))
      (pop-directory)))

(if (args:get-arg "-show-config")
    (let ((tl   (launch:setup))

;;======================================================================
;; read a config file, loading only the section pertinent
;; to this run field1val/field2val/field3val ...
;;======================================================================

(use format directory-utils)

(declare (unit runconfig))
(declare (uses common))

(include "common_records.scm")

(define (runconfig:read fname target environ-patt)
  (let ((ht (make-hash-table)))
    (hash-table-set! ht target '())
    (read-config fname ht #t environ-patt: environ-patt sections: (if target (list "default" target) #f))))

;; NB// to process a runconfig ensure to use environ-patt with target!
;;
(define (setup-env-defaults fname run-id already-seen keyvals #!key (environ-patt #f)(change-env #t))
  (let* ((keys    (map car keyvals))
	 (thekey  (if keyvals 
		      (string-intersperse (map (lambda (x)(if x x "-na-")) (map cadr keyvals)) "/")
		      (or (common:args-get-target)
			  (get-environment-variable "MT_TARGET")
			  (begin
			    (debug:print-error 0 *default-log-port* "setup-env-defaults called with no run-id or -target or -reqtarg")
			    "nothing matches this I hope"))))
	 ;; Why was system disallowed in the reading of the runconfigs file?
	 ;; NOTE: Should be setting env vars based on (target|default)
	 (confdat   (runconfig:read fname thekey environ-patt))
	 (whatfound (make-hash-table))
	 (finaldat  (make-hash-table))
	 (sections (list "default" thekey)))
    (if (not *target*)(set! *target* thekey)) ;; may save a db access or two but repeats db:get-target code
    (debug:print 4 *default-log-port* "Using key=\"" thekey "\"")

    (if change-env

#! /usr/bin/env bash

# This file installs prerequisites for megatest (chicken, eggs, etc.)
# Before running this script, set PREFIX environment variable
# to chicken install target area.  /opt/chicken is a typical value
# set -x

# Copyright 2007-2014, Matthew Welland.
# 
#  This program is made available under the GNU GPL version 2.0 or
#  greater. See the accompanying file COPYING for details.
# 
#  This program is distributed WITHOUT ANY WARRANTY; without even the
#  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
#  PURPOSE.

if [[ $OPTION=="" ]]; then
    export OPTION=std
fi

echo You may need to do the following first:
echo sudo apt-get install libreadline-dev
echo sudo apt-get install libwebkitgtk-dev 
echo sudo apt-get install libpangox-1.0-0 zlib1g-dev libfreetype6-dev cmake
echo sudo apt-get install libssl-dev  uuid-dev

echo sudo apt-get install libmotif3 -OR- set KTYPE=26g4
echo
echo Set OPTION to std, currently OPTION=$OPTION
echo
echo Additionally, if you want mysql-client, you will need to make sure
echo mysql_config is in your path
echo

CentOS_5.11-x86_64-std)
  KTYPE=24g3 
  CDVER=5.4.1
  IUPVER=3.5
  IMVER=3.6.3
  ;; 
esac

echo KTYPE=$KTYPE			  
echo CDVER=$CDVER
echo IUPVER=$IUPVER
echo IMVER=$IMVER	
# NOTES:
#
# Centos with security setup may need to do commands such as following as root:

	if ! [[ -e $PREFIX/bin/sqlite3 ]] ; then
	    if [[ -e tgz/sqlite-autoconf-$SQLITE3_VERSION.tar.gz ]]; then
		tar xfz tgz/sqlite-autoconf-$SQLITE3_VERSION.tar.gz 
		(cd sqlite-autoconf-$SQLITE3_VERSION;./configure --prefix=$PREFIX;make;make install)
	    fi
	fi
fi



cd $BUILDHOME
for egg in "sqlite3" sql-de-lite # nanomsg
do
	echo "Installing $egg"
	CSC_OPTIONS="-I$PREFIX/include -L$PREFIX/lib -L$PREFIX/lib64"  $CHICKEN_INSTALL $PROX -keep-installed $egg
	#CSC_OPTIONS="-I$PREFIX/include -L$PREFIX/lib -L$PREFIX/lib64"  $CHICKEN_INSTALL $PROX $egg
	if [ $? -ne 0 ]; then
		echo "$egg failed to install"
		exit 1
	fi
done

# Some eggs are quoted since they are reserved to Bash
# for f in matchable readline apropos base64 regex-literals format "regex-case" "test" coops trace csv dot-locking posix-utils posix-extras directory-utils hostinfo tcp rpc csv-xml fmt json md5; do
# $CHICKEN_INSTALL $PROX -keep-installed matchable readline apropos base64 regex-literals format "regex-case" "test" coops trace csv dot-locking posix-utils posix-extras directory-utils hostinfo tcp rpc csv-xml fmt json md5 awful http-client spiffy uri-common intarweb http-client spiffy-request-vars md5 message-digest http-client spiffy-directory-listing
for egg in matchable readline apropos base64 regex-literals format "regex-case" "test" \
	coops trace csv dot-locking posix-utils posix-extras directory-utils hostinfo \
	tcp rpc csv-xml fmt json md5 awful http-client spiffy uri-common intarweb http-client \
	spiffy-request-vars s md5 message-digest spiffy-directory-listing ssax sxml-serializer \
	sxml-modifications logpro z3 call-with-environment-variables \
	pathname-expand typed-records simple-exceptions numbers crypt parley srfi-42 \
	alist-lib ansi-escape-sequences args basic-sequences bindings chicken-doc chicken-doc-cmd \
	cock condition-utils debug define-record-and-printer easyffi easyffi-base \
	expand-full ezxdisp filepath foof-loop ini-file irc lalr lazy-seq \
	locale locale-builtin locale-categories locale-components locale-current locale-posix \
	locale-timezone loops low-level-macros procedural-macros refdb rfc3339 scsh-process \
	sexp-diff sha1 shell slice srfi-101 srfi-19 srfi-19-core srfi-19-date srfi-19-io \
	srfi-19-period srfi-19-support srfi-19-time srfi-19-timezone srfi-29 srfi-37 srfi-78 syslog \
	udp uuid uuid-lib zlib

do
	echo "Installing $egg"
	$CHICKEN_INSTALL $PROX -keep-installed $egg
	#$CHICKEN_INSTALL $PROX $egg
	if [ $? -ne 0 ]; then
		echo "$egg failed to install"
		exit 1
	fi
done

if [[ -e `which mysql_config` ]]; then
  $CHICKEN_INSTALL $PROX -keep-installed mysql-client
fi











cd $BUILDHOME
cd `$PREFIX/bin/csi -p '(chicken-home)'`
curl http://3e8.org/pub/chicken-doc/chicken-doc-repo.tgz | tar zx
cd $BUILDHOME

# CSC_OPTIONS="-I$PREFIX/include -L$CSCLIBS" $CHICKEN_INSTALL $PROX -D no-library-checks -feature disable-iup-web -deploy -prefix $DEPLOYTARG iup
# iup:1.0.2 
CSC_OPTIONS="-I$PREFIX/include -L$PREFIX/lib" $CHICKEN_INSTALL $PROX -D no-library-checks canvas-draw
# CSC_OPTIONS="-I$PREFIX/include -L$CSCLIBS" $CHICKEN_INSTALL $PROX -D no-library-checks -deploy -prefix $DEPLOYTARG canvas-draw

cd $BUILDHOME  

# install ducttape
cd ../ducttape
$CHICKEN_INSTALL

cd $BUILDHOME
echo You may need to add $LD_LIBRARY_PATH to your LD_LIBRARY_PATH variable, a setup-chicken4x.sh 
echo file can be found in the current directory which should work for setting up to run chicken4x


echo Testing iup
$PREFIX/bin/csi -b -eval '(use iup)(print "Success")'