Megatest

tests.o runs.o dashboard.o dashboard-tests.o dashboard-main.o  : run_records.scm
db.o ezsteps.o keys.o launch.o megatest.o monitor.o runs-for-ref.o runs.o tests.o : key_records.scm
tests.o tasks.o dashboard-tasks.o : task_records.scm
runs.o : test_records.scm
megatest.o : megatest-fossil-hash.scm

# Temporary while transitioning to new routine
runs.o : run-tests-queue-classic.scm  run-tests-queue-new.scm

megatest-fossil-hash.scm : $(SRCFILES) megatest.scm *_records.scm
	echo "(define megatest-fossil-hash \"$(MTESTHASH)\")" > megatest-fossil-hash.new
	if ! diff -q megatest-fossil-hash.new megatest-fossil-hash.scm ; then echo copying .new to .scm;cp -f megatest-fossil-hash.new megatest-fossil-hash.scm;fi

$(OFILES) $(GOFILES) : common_records.scm 

     (lambda (count)
       (set! numruns count))
     db
     "SELECT COUNT(id) FROM runs WHERE runname LIKE ? AND state != 'deleted';" runpatt)
    (debug:print-info 11 "db:get-num-runs END " runpatt)
    numruns))






































;; use (get-value-by-header (db:get-header runinfo)(db:get-row runinfo))
(define (db:get-run-info db run-id)
  ;;(if (hash-table-ref/default *run-info-cache* run-id #f)
  ;;    (hash-table-ref *run-info-cache* run-id)
      (let* ((res      #f)
	     (keys      (db:get-keys db))
	     (remfields (list "id" "runname" "state" "status" "owner" "event_time"))

(include "db_records.scm")
(include "run_records.scm")
(include "test_records.scm")

;; This is the Megatest API. All generally "useful" routines will be wrapped or extended
;; here.



















(define (mt:get-tests-for-run run-id testpatt states status #!key (not-in #t) (sort-by #f))
  (let loop ((testsdat (cdb:remote-run db:get-tests-for-run #f run-id testpatt states status 0 500 not-in sort-by))
	     (res      '())
	     (offset   0)
	     (limit    500))
    (let* ((full-list (append res testsdat))

(include "common_records.scm")
(include "key_records.scm")
(include "db_records.scm")
(include "run_records.scm")
(include "test_records.scm")

;; runs:get-runs-by-patt
;; get runs by list of criteria
;; register a test run with the db
;;
;; Use: (db-get-value-by-header (db:get-header runinfo)(db:get-row runinfo))
;;  to extract info from the structure returned
;;
(define (runs:get-runs-by-patt db keys runnamepatt targpatt) ;; test-name)
  (let* ((tmp      (runs:get-std-run-fields keys '("id" "runname" "state" "status" "owner" "event_time")))
	 (keystr   (car tmp))
	 (header   (cadr tmp))
	 (res     '())
	 (key-patt "")
	 (runwildtype (if (substring-index "%" runnamepatt) "like" "glob"))
	 (qry-str  #f)
	 (keyvals  (keys:target->keyval keys targpatt)))
    (for-each (lambda (keyval)
		(let* ((key    (car keyval))
		       (patt   (cadr keyval))
		       (fulkey (conc ":" key))
		       (wildtype (if (substring-index "%" patt) "like" "glob")))
		  (if patt
		      (set! key-patt (conc key-patt " AND " key " " wildtype " '" patt "'"))
		      (begin
			(debug:print 0 "ERROR: searching for runs with no pattern set for " fulkey)
			(exit 6)))))
	      keyvals)
    (set! qry-str (conc "SELECT " keystr " FROM runs WHERE runname " runwildtype " ? " key-patt ";"))
    (debug:print-info 4 "runs:get-runs-by-patt qry=" qry-str " " runnamepatt)
    (sqlite3:for-each-row 
     (lambda (a . r)
       (set! res (cons (list->vector (cons a r)) res)))
     db 
     qry-str
     runnamepatt)
    (vector header res)))

(define (runs:test-get-full-path test)
  (let* ((testname (db:test-get-testname   test))
	 (itempath (db:test-get-item-path test)))
    (conc testname (if (equal? itempath "") "" (conc "(" itempath ")")))))

;; This is the *new* methodology. One record to inform them and in the chaos, organise them.
;;

		(for-each (lambda (varval)
			    (set! envdat (append envdat (list varval)))
			    (setenv (car varval)(cadr varval)))
			  (configf:get-section runconfig section)))
	      (list "default" target))
    (vector target runname testpatt keys keyvals envdat mconfig runconfig serverdat transport db toppath run-id)))

	 
(define (set-megatest-env-vars run-id #!key (inkeys #f)(inrunname #f)(inkeyvals #f))
  (let* ((target      (or (args:get-arg "-reqtarg")
			  (args:get-arg "-target")
			  (get-environment-variable "MT_TARGET")))
	 (keys    (if inkeys    inkeys    (cdb:remote-run db:get-keys #f)))
	 (keyvals (if inkeyvals inkeyvals (keys:target->keyval keys target)))
	 (vals (hash-table-ref/default *env-vars-by-run-id* run-id #f)))

;; Every time can-run-more-tests is called increment the delay
;;
;; NOTE: We run this server-side!! Do not use this global except in the runs:can-run-more-tests routine
;;
(define *last-num-running-tests* 0)
(define *runs:can-run-more-tests-count* 0)
(define (runs:shrink-can-run-more-tests-count db) ;; the db is just so we can use cdb:remote-run
  (set! *runs:can-run-more-tests-count* 0)) ;; (/ *runs:can-run-more-tests-count* 2)))

(define (runs:can-run-more-tests db jobgroup max-concurrent-jobs)
  (thread-sleep! (cond
		  ((> *runs:can-run-more-tests-count* 20) 2);; obviously haven't had any work to do for a while
		  (else 0)))
  (let* ((num-running             (db:get-count-tests-running db))

				       (>= num-running-in-jobgroup job-group-limit))
				  (debug:print 1 "WARNING: number of jobs " num-running-in-jobgroup 
					       " in " jobgroup " exceeded, will not run " (tests:testqueue-get-testname test-record))
				  #t)
				 (else #f))))
	  (list (not can-not-run-more) num-running num-running-in-jobgroup max-concurrent-jobs job-group-limit)))))

;;======================================================================
;; New methodology. These routines will replace the above in time. For
;; now the code is duplicated. This stuff is initially used in the monitor
;; based code.
;;======================================================================


;; This is a duplicate of run-tests (which has been deprecated). Use this one instead of run tests.
;; keyvals.
;;
;;  test-names: Comma separated patterns same as test-patts but used in selection 
;;              of tests to run. The item portions are not respected.
;;              FIXME: error out if /patt specified
;;            
(define (runs:run-tests target runname test-patts user flags) ;; test-names
  (common:clear-caches) ;; clear all caches
  (let* ((db          #f)
	 (keys        (keys:config-get-fields *configdat*))
	 (keyvals     (keys:target->keyval keys target))
	 (run-id      (cdb:remote-run db:register-run #f keyvals runname "new" "n/a" user))  ;;  test-name)))
	 (deferred    '()) ;; delay running these since they have a waiton clause
	 ;; keepgoing is the defacto modality now, will add hit-n-run a bit later
	 ;; (keepgoing   (hash-table-ref/default flags "-keepgoing" #f))
	 (runconfigf   (conc  *toppath* "/runconfigs.config"))
	 (required-tests '())
	 (test-records (make-hash-table))
	 (all-test-names (tests:get-valid-tests *toppath* "%"))) ;; we need a list of all valid tests to check waiton names

    (set-megatest-env-vars run-id inkeys: keys) ;; these may be needed by the launching process

    (if (file-exists? runconfigf)
	(setup-env-defaults runconfigf run-id *already-seen-runconfig-info* keyvals "pre-launch-env-vars")
	(debug:print 0 "WARNING: You do not have a run config file: " runconfigf))
    
    ;; look up all tests matching the comma separated list of globs in
    ;; test-patts (using % as wildcard)

    (set! test-names (tests:get-valid-tests *toppath* test-patts))
    (set! test-names (delete-duplicates test-names))

    (debug:print-info 0 "test names " test-names)

    ;; on the first pass or call to run-tests set FAILS to NOT_STARTED if
    ;; -keepgoing is specified
    (if (eq? *passnum* 0)
	(begin
	  ;; have to delete test records where NOT_STARTED since they can cause -keepgoing to 
	  ;; get stuck due to becoming inaccessible from a failed test. I.e. if test B depends 
	  ;; on test A but test B reached the point on being registered as NOT_STARTED and test
	  ;; A failed for some reason then on re-run using -keepgoing the run can never complete.
	  (cdb:delete-tests-in-state *runremote* run-id "NOT_STARTED")
	  (cdb:remote-run db:set-tests-state-status #f run-id test-names #f "FAIL" "NOT_STARTED" "FAIL")))

    ;; from here on out the db will be opened and closed on every call runs:run-tests-queue
    ;; (sqlite3:finalize! db) 
    ;; now add non-directly referenced dependencies (i.e. waiton)
    (if (not (null? test-names))
	(let loop ((hed (car test-names))
		   (tal (cdr test-names)))         ;; 'return-procs tells the config reader to prep running system but return a proc
	  (let* ((config  (tests:get-testconfig hed 'return-procs))
		 (waitons (let ((instr (if config 
					   (config-lookup config "requirements" "waiton")
					   (begin ;; No config means this is a non-existant test
					     (debug:print 0 "ERROR: non-existent required test \"" hed "\"")
					     (if db (sqlite3:finalize! db))
					     (exit 1)))))
			    (debug:print-info 8 "waitons string is " instr)
			    (let ((newwaitons
				   (string-split (cond
						  ((procedure? instr)
						   (let ((res (instr)))
						     (debug:print-info 8 "waiton procedure results in string " res " for test " hed)

(define (runs:queue-next-reg tal reg n regful)
  (if regful
      (cdr reg)
      (if (eq? (length tal) 1)
	  '()
	  reg)))

(include "run-tests-queue-classic.scm")
(include "run-tests-queue-new.scm")

;; parent-test is there as a placeholder for when parent-tests can be run as a setup step
(define (run:test run-id run-info keyvals runname test-record flags parent-test)
  ;; All these vars might be referenced by the testconfig file reader
  (let* ((test-name    (tests:testqueue-get-testname   test-record))
	 (test-waitons (tests:testqueue-get-waitons    test-record))
	 (test-conf    (tests:testqueue-get-testconfig test-record))
	 (itemdat      (tests:testqueue-get-itemdat    test-record))

;;
;; NB// should pass in keys?
;;
(define (runs:operate-on action target runnamepatt testpatt #!key (state #f)(status #f)(new-state-status #f))
  (common:clear-caches) ;; clear all caches
  (let* ((db           #f)
	 (keys         (cdb:remote-run db:get-keys db))
	 (rundat       (cdb:remote-run runs:get-runs-by-patt db keys runnamepatt target))
	 (header       (vector-ref rundat 0))
	 (runs         (vector-ref rundat 1))
	 (states       (if state  (string-split state  ",") '()))
	 (statuses     (if status (string-split status ",") '()))
	 (state-status (if (string? new-state-status) (string-split new-state-status ",") '(#f #f))))
    (debug:print-info 4 "runs:operate-on => Header: " header " action: " action " new-state-status: " new-state-status)
    (if (> 2 (length state-status))

;;======================================================================
;; Lock/unlock runs
;;======================================================================

(define (runs:handle-locking target keys runname lock unlock user)
  (let* ((db       #f)
	 (rundat   (cdb:remote-run runs:get-runs-by-patt db keys runname target))
	 (header   (vector-ref rundat 0))
	 (runs     (vector-ref rundat 1)))
    (for-each (lambda (run)
		(let ((run-id (db:get-value-by-header run header "id")))
		  (if (or lock
			  (and unlock
			       (begin