Megatest

              ;;      			(or (not dbexists) ;; if no file then something wrong - mark as incomplete
              ;;      			    (> (- (current-seconds)(file-modification-time tdatpath)) 600)))) ;; no change in 10 minutes to testdat.db - she's dead Jim
              ;;      		    incompleted))
              (min-incompleted-ids (map car incompleted)) ;; do 'em all
              (all-ids             (append min-incompleted-ids (map car oldlaunched))))
         (if (> (length all-ids) 0)
             (begin
               (debug:print 0 *default-log-port* "WARNING: Marking test(s); " (string-intersperse (map conc all-ids) ", ") " as DEAD")
               (for-each
                (lambda (test-id)
                  (db:set-state-status-and-roll-up-items dbstruct run-id test-id 'foo "COMPLETED" "DEAD" "Test stopped responding while in RUNNING or REMOTEHOSTSTART; presumed dead."))
                  ;;(db:test-set-state-status dbstruct run-id test-id "COMPLETED" "DEAD" "Test stopped responding while in RUNNING or REMOTEHOSTSTART; presumed dead.")) ;; fix for one aspect of Randy's ticket 1405717332 ;; TODO - fix problem where test goes to COMPLETED/DEAD while in progress, only later to go to COMPLETED/PASS.  ref ticket 220546828
                all-ids))))))))

;; ALL REPLACED BY THE BLOCK ABOVE
;;
;; 	    (sqlite3:execute 
;; 	     db
;; 	     (conc "UPDATE tests SET state='INCOMPLETE' WHERE run_id=? AND id IN (" 

                                              (get-df (current-directory))
                                              disk-free))
                                   (delta (abs (- df disk-free))))
                              (if (and (> df 0)
                                       (> (/ delta df) 0.1)) ;; (> delta 200) ;; ignore changes under 200 Meg
                                  df
                                  #f)))
             (do-sync       (or new-cpu-load new-disk-free over-time))

             (test-info   (rmt:get-test-info-by-id run-id test-id))
             (state       (db:test-get-state test-info))
             (status      (db:test-get-status test-info))
             (kill-reason  "no kill reason specified")
             (kill-job?    #f))

        (cond
         ((test-get-kill-request run-id test-id)
          (set! kill-reason "KILLING TEST since received kill request (KILLREQ)")
          (set! kill-job? #t))
         ((and runtlim (> (- (current-seconds) start-seconds) runtlim))



          (set! kill-reason (conc "KILLING TEST DUE TO TIME LIMIT EXCEEDED! Runtime=" run-seconds " seconds, limit=" runtlim))
          (set! kill-job? #t))
         ((equal? status "DEAD")
          (set! kill-reason "KILLING TEST because it was marked as DEAD by launch:handle-zombie-tests")
          (set! kill-job? #t)))

        (debug:print 4 *default-log-port* "cpu: " new-cpu-load " disk: " new-disk-free " last-sync: " last-sync " do-sync: " do-sync)
        (launch:handle-zombie-tests run-id)
        (if do-sync
            (tests:update-central-meta-info run-id test-id new-cpu-load new-disk-free (calc-minutes) #f #f))
        
	(if kill-job? 
	    (begin
              (debug:print-info 0 *default-log-port* "proceeding to kill test: "kill-reason)
	      (mutex-lock! m)
	      ;; NOTE: The pid can change as different steps are run. Do we need handshaking between this
	      ;;       section and the runit section? Or add a loop that tries three times with a 1/4 second
	      ;;       between tries?
	      (let* ((pid1 (launch:einf-pid exit-info)) ;; (vector-ref exit-info 0))
		     (pid2 (rmt:test-get-top-process-pid run-id test-id))
		     (pids (delete-duplicates (filter number? (list pid1 pid2)))))

				 (handle-exceptions
				  exn
				  #f
				  (process-signal pid-num signal/kill)))
			       (process:get-sub-pids pid))))
		       ;;    (debug:print-info 0 *default-log-port* "not killing process " pid " as it is not alive"))))
		       pids)
		      (tests:test-set-status! run-id test-id "KILLED"  "KILLED" (conc (args:get-arg "-m")" "kill-reason) #f))
		    (begin
		      (debug:print-error 0 *default-log-port* "Nothing to kill, pid1=" pid1 ", pid2=" pid2)
		      (tests:test-set-status! run-id test-id "KILLED"  "FAILED TO KILL" (conc (args:get-arg "-m")" "kill-reason) #f)
		      )))
	      (mutex-unlock! m)
	      ;; no point in sticking around. Exit now.
	      (exit)))
	(if (hash-table-ref/default misc-flags 'keep-going #f)
	    (begin
	      (thread-sleep! 3) ;; (+ 3 (random 6))) ;; add some jitter to the call home time to spread out the db accesses

	      ;; (tests:test-force-state-status! run-id test-id "REMOTEHOSTSTART" "n/a")
	      (rmt:test-set-state-status run-id test-id "REMOTEHOSTSTART" "n/a" #f)
	      )
	     (else ;; (member (db:test-get-state test-info) '("REMOVING" "REMOTEHOSTSTART" "RUNNING" "KILLREQ"))
	      (debug:print-error 0 *default-log-port* "test state is " (db:test-get-state test-info) ", cannot proceed")
	      (exit))))
	  
	  (debug:print 2 *default-log-port* "Executing " test-name " (id: " test-id ") on " (get-host-name))
	  (set! keys       (rmt:get-keys))
	  ;; (runs:set-megatest-env-vars run-id inkeys: keys inkeyvals: keyvals) ;; these may be needed by the launching process
	  ;; one of these is defunct/redundant ...
	  (if (not (launch:setup force-reread: #t))
	      (begin
		(debug:print 0 *default-log-port* "Failed to setup, exiting") 
		;; (sqlite3:finalize! db)

	  (list lnkpathf lnkpath ))
	(if (and test-src-path (> remtries 0))
	    (begin
	      (debug:print-error 0 *default-log-port* "Failed to create work area at " test-path " with link at " lnktarget ", remaining attempts " remtries)
	      ;; 
	      (create-work-area run-id run-info keyvals test-id test-src-path disk-path testname itemdat remtries: (- remtries 1)))
	    (list #f #f)))))


(define (launch:handle-zombie-tests run-id)
  (let* ((key (conc "zombiescan-runid-"run-id))
         (now (current-seconds))
         (threshold (- (current-seconds)  (* 2 (or (configf:lookup-number *configdat* "setup" "deadtime") 120))))
         (val (rmt:get-var key))
         (do-scan?
          (cond
           ((not val)
            #t)
           ((< val threshold)
            #t)
           (else #f))))
    (when do-scan?
      (debug:print 1 *default-log-port* "INFO: search and mark zombie tests")
      (rmt:set-var key (current-seconds))
      (rmt:find-and-mark-incomplete run-id #f))))





;; 1. look though disks list for disk with most space
;; 2. create run dir on disk, path name is meaningful
;; 3. create link from run dir to megatest runs area 
;; 4. remotely run the test on allocated host
;;    - could be ssh to host from hosts table (update regularly with load)
;;    - could be netbatch