Megatest

Changes On Branch 418b7254b439b51a
Login

Changes In Branch v1.65-test-rundat2 Through [418b7254b4] Excluding Merge-Ins

This is equivalent to a diff from 2769e4b7c9 to 418b7254b4

2021-03-01
17:42
Manually patched in the new view check-in: f5206150ee user: mrwellan tags: v1.6569-new-view
2021-01-26
14:00
Fix for the > crash. Maybe... Leaf check-in: 5a05fc04ff user: matt tags: v1.6569-gt-crash-fix
2021-01-25
12:03
rebased lazy-queue rollup check-in: 07ab120544 user: matt tags: v1.65-lazyqueue-items-rollup
2021-01-15
22:46
begin diet check-in: badd71f3b3 user: matt tags: v1.6569-diet
21:34
eval-string-in-environment if was disabled, re-enabled check-in: 9564772564 user: matt tags: v1.6569-reenable-eval-if
2021-01-08
11:42
enable custom value for max delay between archive time and test last update time Leaf check-in: 86a3d1148e user: pjhatwal tags: v1.6569-refactor
2020-11-25
12:00
Fixed issues in server gating code Leaf check-in: 063273e8cb user: mrwellan tags: v1.6569-server-gate-fix
2020-11-24
22:27
Added support for resetting run - allows to reload tests-paths to add tests to a run part way though. Just run megatest -clean-cache -runname $MT_RUNNAME Leaf check-in: 213021e02d user: mrwellan tags: v1.6596-reload-tests-paths
2020-10-27
23:45
Meld'd across changes from v1.65 as part of careful meld together. Leaf check-in: e6594b0fb0 user: matt tags: v1.65-test-rundat2
2020-10-23
23:03
meld'd in changes from v1.65. Do not use merge. check-in: 418b7254b4 user: matt tags: v1.65-test-rundat2
2020-10-13
16:46
Changed version from 69 to 76. No other changes. Will compile with chicken 13 check-in: 87ca35010f user: mmgraham tags: v1.65, v1.6576
2020-10-12
16:49
Reduced message from failed to info. Reverted a delay which seems to help pass full stack ext-tests. Leaf check-in: 9e35b1252c user: mrwellan tags: v1.65-minor-patch
10:18
Safe vector access in rmt. check-in: 58bb6d997a user: mrwellan tags: v1.65-side2
2020-10-11
22:46
Patched forward adjutant code. check-in: f936717bfa user: matt tags: v1.65-adjutant-again
2020-10-05
22:49
Do not exit on failure to create directory - race conditons on NFS cause false fail scenarios - just keep going and cross your fingers... (cherrypicked from v1.6572) check-in: 05b253a452 user: matt tags: v1.65-sidework
22:46
run duration testdat check-in: 4a0b43f3c6 user: matt tags: v1.65-test-rundat2
2020-09-21
15:36
merged in 1.65-test-rundat branch ==/FAIL/orion,mars/== check-in: cfd25d66e9 user: mmgraham tags: v1.6571, v1.65-failed-testdat
07:00
Added get-testsuite-name all over launch:setup and still not set when needed! This did NOT work. Closed-Leaf check-in: 2efe8ad422 user: mrwellan tags: v1.65-get-testsuitename
2020-09-19
04:21
Start moving test_rundat to no-sync db. ==/20/2/WARN/1203/mars/== check-in: abfabdb839 user: matt tags: v1.65-test-rundat
2020-09-18
17:30
added check for file existence before file delete ==/14/1.9/WARN/orion,mars/== NOTE: This is the last v1.65 before the split off. I.e code from before this point IS in the far future v1.65 branch. Code from this point to that branch might NOT be in the branch. check-in: 2769e4b7c9 user: mmgraham tags: v1.65, v1.6569
12:27
cherry picked 2 fixes, changed version to 1.6569 ==/7.2/2.0/PASS/1201/mars/== check-in: d145d0eb02 user: mmgraham tags: v1.65

Modified Makefile from [0dc94ad098] to [d83b61005f].

91
92
93
94
95
96
97
98

99
100
101
102
103
104
105

dboard : $(OFILES) $(GOFILES) dashboard.scm $(MOFILES) $(MOIMPFILES) megatest-version.scm megatest-fossil-hash.scm
	csc $(CSCOPTS) $(OFILES) dashboard.scm $(GOFILES) $(MOFILES) $(MOIMPFILES) -o dboard

mtut: $(OFILES) $(MOFILES) megatest-fossil-hash.scm mtut.scm megatest-version.scm
	csc $(CSCOPTS) $(OFILES) $(MOFILES) mtut.scm -o mtut

# include makefile.inc


TCMTOBJS = \
	api.o \
	archive.o \
	cgisetup/models/pgdb.o \
	client.o \
	common.o \







|
>







91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106

dboard : $(OFILES) $(GOFILES) dashboard.scm $(MOFILES) $(MOIMPFILES) megatest-version.scm megatest-fossil-hash.scm
	csc $(CSCOPTS) $(OFILES) dashboard.scm $(GOFILES) $(MOFILES) $(MOIMPFILES) -o dboard

mtut: $(OFILES) $(MOFILES) megatest-fossil-hash.scm mtut.scm megatest-version.scm
	csc $(CSCOPTS) $(OFILES) $(MOFILES) mtut.scm -o mtut

include makefile.inc
include chicken.makefile

TCMTOBJS = \
	api.o \
	archive.o \
	cgisetup/models/pgdb.o \
	client.o \
	common.o \

Modified TODO from [da5eae4898] to [dcd0f52bc7].

14
15
16
17
18
19
20







21
22
23
24
25
26
27
# 
#     You should have received a copy of the GNU General Public License
#     along with Megatest.  If not, see <http://www.gnu.org/licenses/>.

TODO
====








WW15
. fill newview matrix with data, filter pipeline gui elements
. improve [script], especially indent handling

WW16
. split db into megatest.db (runs etc.) db/<something>.db
. release basic newview implementation







>
>
>
>
>
>
>







14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
# 
#     You should have received a copy of the GNU General Public License
#     along with Megatest.  If not, see <http://www.gnu.org/licenses/>.

TODO
====

WW38
. Add test_rundat to no-sync ==> correction, put in <testdir>/.meta/test-run.dat
. Add STATE/STATUS transitions to .meta/test-run.dat or similar
. Swizzle update-test-rundat to operate on no-sync
. Swizzle update-run-duration, -uname-host and cpuload-diskfree to no-sync
. On state/status change update tests table with duration

WW15
. fill newview matrix with data, filter pipeline gui elements
. improve [script], especially indent handling

WW16
. split db into megatest.db (runs etc.) db/<something>.db
. release basic newview implementation

Modified api.scm from [4fa67bb6bd] to [cc4c2bfc8f].

152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179


180
181
182
183
184
185
186
    ((not (vector? dat))                    ;; it is an error to not receive a vector
     (vector #f (vector #f "remote must be called with a vector")))
    ((> *api-process-request-count* 20) ;; 20)
     (debug:print 0 *default-log-port* "WARNING: api:execute-requests received an overloaded message.")
     (set! *server-overloaded* #t)
     (vector #f (vector #f 'overloaded))) ;; the inner vector is what gets returned. nope, don't know why. please refactor!
    (else  
     (let* ((cmd-in            (vector-ref dat 0))
            (cmd               (if (symbol? cmd-in)
				   cmd-in
				   (string->symbol cmd-in)))
            (params            (vector-ref dat 1))
            (start-t           (current-milliseconds))
            (readonly-mode     (dbr:dbstruct-read-only dbstruct))
            (readonly-command  (member cmd api:read-only-queries))
            (writecmd-in-readonly-mode (and readonly-mode (not readonly-command)))
            (foo               (begin
                                 (common:telemetry-log (conc "api-in:"(->string cmd))
                                                       payload: `((params . ,params)))
                                 
                                 #t))
            (res    
             (if writecmd-in-readonly-mode
                 (conc "attempt to run write command "cmd" on a read-only database")
                 (case cmd
                   ;;===============================================
                   ;; READ/WRITE QUERIES
                   ;;===============================================



                   ((get-keys-write)                        (db:get-keys dbstruct)) ;; force a dummy "write" query to force server; for debug in -repl
                   
                   ;; SERVERS
                   ((start-server)                    (apply server:kind-run params))
                   ((kill-server)                     (set! *server-run* #f))








|



|





|










>
>







152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
    ((not (vector? dat))                    ;; it is an error to not receive a vector
     (vector #f (vector #f "remote must be called with a vector")))
    ((> *api-process-request-count* 20) ;; 20)
     (debug:print 0 *default-log-port* "WARNING: api:execute-requests received an overloaded message.")
     (set! *server-overloaded* #t)
     (vector #f (vector #f 'overloaded))) ;; the inner vector is what gets returned. nope, don't know why. please refactor!
    (else  
     (let* ((cmd-in            (common:safe-vector-ref dat 0 'nocmd))
            (cmd               (if (symbol? cmd-in)
				   cmd-in
				   (string->symbol cmd-in)))
            (params            (common:safe-vector-ref dat 1 '()))
            (start-t           (current-milliseconds))
            (readonly-mode     (dbr:dbstruct-read-only dbstruct))
            (readonly-command  (member cmd api:read-only-queries))
            (writecmd-in-readonly-mode (and readonly-mode (not readonly-command)))
            (foo               (begin
                                 #;(common:telemetry-log (conc "api-in:"(->string cmd))
                                                       payload: `((params . ,params)))
                                 
                                 #t))
            (res    
             (if writecmd-in-readonly-mode
                 (conc "attempt to run write command "cmd" on a read-only database")
                 (case cmd
                   ;;===============================================
                   ;; READ/WRITE QUERIES
                   ;;===============================================

		   ((nocmd)                         '(#f "All broken!"))

                   ((get-keys-write)                        (db:get-keys dbstruct)) ;; force a dummy "write" query to force server; for debug in -repl
                   
                   ;; SERVERS
                   ((start-server)                    (apply server:kind-run params))
                   ((kill-server)                     (set! *server-run* #f))

357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
       ;; save all stats
       (let ((delta-t (- (current-milliseconds)
			 start-t)))
	 (hash-table-set! *db-api-call-time* cmd
			  (cons delta-t (hash-table-ref/default *db-api-call-time* cmd '()))))
       (if writecmd-in-readonly-mode
           (begin
             (common:telemetry-log (conc "api-out:"(->string cmd))
                                   payload: `((params . ,params)
                                              (ok-res . #t)))
	     (vector #f res))
           (begin
             (common:telemetry-log (conc "api-out:"(->string cmd))
                                   payload: `((params . ,params)
                                              (ok-res . #f)))
             (vector #t res))))))))

;; http-server  send-response
;;                 api:process-request
;;                    db:*
;;
;; NB// Runs on the server as part of the server loop
;;
(define (api:process-request dbstruct $) ;; the $ is the request vars proc
  (set! *api-process-request-count* (+ *api-process-request-count* 1))
  (let* ((cmd     ($ 'cmd))
	 (paramsj ($ 'params))
	 (params  (db:string->obj paramsj transport: 'http)) ;; incoming data from the POST (or is it a GET?)
	 (resdat  (api:execute-requests dbstruct (vector cmd params))) ;; process the request, resdat = #( flag result )
	 (success (vector-ref resdat 0))
	 (res     (vector-ref resdat 1))) ;; (vector flag payload), get the payload, ignore the flag (why?)
    (if (not success)
	(debug:print 0 *default-log-port* "ERROR: success flag is #f for " cmd " with params " params))
    (if (> *api-process-request-count* *max-api-process-requests*)
	(set! *max-api-process-requests* *api-process-request-count*))
    (set! *api-process-request-count* (- *api-process-request-count* 1))
    ;; This can be here but needs controls to ensure it doesn't run more than every 4 seconds
    ;; (rmt:dat->json-str







|




|
















|
|







359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
       ;; save all stats
       (let ((delta-t (- (current-milliseconds)
			 start-t)))
	 (hash-table-set! *db-api-call-time* cmd
			  (cons delta-t (hash-table-ref/default *db-api-call-time* cmd '()))))
       (if writecmd-in-readonly-mode
           (begin
             #;(common:telemetry-log (conc "api-out:"(->string cmd))
                                   payload: `((params . ,params)
                                              (ok-res . #t)))
	     (vector #f res))
           (begin
             #;(common:telemetry-log (conc "api-out:"(->string cmd))
                                   payload: `((params . ,params)
                                              (ok-res . #f)))
             (vector #t res))))))))

;; http-server  send-response
;;                 api:process-request
;;                    db:*
;;
;; NB// Runs on the server as part of the server loop
;;
(define (api:process-request dbstruct $) ;; the $ is the request vars proc
  (set! *api-process-request-count* (+ *api-process-request-count* 1))
  (let* ((cmd     ($ 'cmd))
	 (paramsj ($ 'params))
	 (params  (db:string->obj paramsj transport: 'http)) ;; incoming data from the POST (or is it a GET?)
	 (resdat  (api:execute-requests dbstruct (vector cmd params))) ;; process the request, resdat = #( flag result )
	 (success (common:safe-vector-ref resdat 0 #f))
	 (res     (common:safe-vector-ref resdat 1 #f))) ;; (vector flag payload), get the payload, ignore the flag (why?)
    (if (not success)
	(debug:print 0 *default-log-port* "ERROR: success flag is #f for " cmd " with params " params))
    (if (> *api-process-request-count* *max-api-process-requests*)
	(set! *max-api-process-requests* *api-process-request-count*))
    (set! *api-process-request-count* (- *api-process-request-count* 1))
    ;; This can be here but needs controls to ensure it doesn't run more than every 4 seconds
    ;; (rmt:dat->json-str

Modified chicken.makefile from [4ef647f9d5] to [a0b25b284f].

21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
# Chicken build
#======================================================================

# CHICKEN_BIN_DIR=$(shell dirname $(shell which csi))
# if have csi on path use that, else use default
# CSIPATH=$(shell which csi)
# CKPATH=$(shell dirname $(shell dirname $(CSIPATH)))
sCHICKEN_PREFIX=$(or $(CKPATH),$(PREFIX)/bin/.$(ARCHSTR))

whatever :
	@echo "CHICKEN_PREFIX=$(CHICKEN_PREFIX)"

tgz-$(USER)/postgresql-9.6.4.tar.gz :
	mkdir -p tgz-$(USER)
	wget -c https://ftp.postgresql.org/pub/source/v9.6.4/postgresql-9.6.4.tar.gz







|







21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
# Chicken build
#======================================================================

# CHICKEN_BIN_DIR=$(shell dirname $(shell which csi))
# if have csi on path use that, else use default
# CSIPATH=$(shell which csi)
# CKPATH=$(shell dirname $(shell dirname $(CSIPATH)))
CHICKEN_PREFIX=$(or $(CKPATH),$(PREFIX)/bin/.$(ARCHSTR))

whatever :
	@echo "CHICKEN_PREFIX=$(CHICKEN_PREFIX)"

tgz-$(USER)/postgresql-9.6.4.tar.gz :
	mkdir -p tgz-$(USER)
	wget -c https://ftp.postgresql.org/pub/source/v9.6.4/postgresql-9.6.4.tar.gz
64
65
66
67
68
69
70

71
72
73
74
75
76
77
	cd tgz-$(USER)/nanomsg-1.0.0; mkdir build-$(USER); cd build-$(USER);
	cd tgz-$(USER)/nanomsg-1.0.0/build-$(USER); cmake ../ -DCMAKE_INSTALL_PREFIX=$(CHICKEN_PREFIX)
	cd tgz-$(USER)/nanomsg-1.0.0/build-$(USER); make; make install

$(CHICKEN_PREFIX)/chicken-4.13.0/LICENSE : tgz-$(USER)/chicken-4.13.0.tar.gz
	mkdir -p build-$(USER)/eggs-installed
	cd build-$(USER);tar xf ../tgz-$(USER)/chicken-4.13.0.tar.gz


tgz-$(USER)/opensrc.fossil :
	cd tgz-$(USER); fossil clone http://www.kiatoa.com/fossils/opensrc opensrc.fossil
	mkdir tgz-$(USER)/opensrc
	cd tgz-$(USER)/opensrc; fossil open --nested ../opensrc.fossil; fossil up; fossil uv sync

$(CHICKEN_PREFIX)/lib/libiupweb.so : tgz-$(USER)/opensrc.fossil







>







64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
	cd tgz-$(USER)/nanomsg-1.0.0; mkdir build-$(USER); cd build-$(USER);
	cd tgz-$(USER)/nanomsg-1.0.0/build-$(USER); cmake ../ -DCMAKE_INSTALL_PREFIX=$(CHICKEN_PREFIX)
	cd tgz-$(USER)/nanomsg-1.0.0/build-$(USER); make; make install

$(CHICKEN_PREFIX)/chicken-4.13.0/LICENSE : tgz-$(USER)/chicken-4.13.0.tar.gz
	mkdir -p build-$(USER)/eggs-installed
	cd build-$(USER);tar xf ../tgz-$(USER)/chicken-4.13.0.tar.gz
	if [[ -e $(CHICKEN_PREFIX)/chicken-4.13.0/LICENSE ]];then touch $(CHICKEN_PREFIX)/chicken-4.13.0/LICENSE;fi

tgz-$(USER)/opensrc.fossil :
	cd tgz-$(USER); fossil clone http://www.kiatoa.com/fossils/opensrc opensrc.fossil
	mkdir tgz-$(USER)/opensrc
	cd tgz-$(USER)/opensrc; fossil open --nested ../opensrc.fossil; fossil up; fossil uv sync

$(CHICKEN_PREFIX)/lib/libiupweb.so : tgz-$(USER)/opensrc.fossil
110
111
112
113
114
115
116
117
118
119
120
121
122
123

124
125
126
127
128







129
130
131

132





133
134
135
136
137
138
139
ALL_CKBIN=chicken chicken-bind chicken-bug chicken-dump			\
chicken-install chicken-profile chicken-sqlite3 chicken-status		\
chicken-uninstall csc csi feathers nanocat sqlite3 vacuumdb logpro	\
refdb

CKBIN_WRAPPERS=$(addprefix $(PREFIX)/bin/,$(ALL_CKBIN))

$(PREFIX)/bin/% : $(CHICKEN_PREFIX)/bin/% $(CHICKEN_PREFIX)/bin/csi $(EGGSTARG2)
	utils/mk_wrapper_tool $(PREFIX) $* $(PREFIX)/bin/$*
	chmod a+x $(PREFIX)/bin/$*

$(PREFIX)/bin :
	mkdir -p $(PREFIX)/bin $(CHICKEN_PREFIX)/bin


chicken : $(PREFIX)/bin $(CHICKEN_PREFIX)/bin/csi  binwrappers
	@echo "Fake target to build prefix chicken"

binwrappers : $(CKBIN_WRAPPERS)








postgresql.done : $(CHICKEN_PREFIX)/bin/pg_config
	CSC_OPTIONS="-I$(CHICKEN_PREFIX)/include -L$(CHICKEN_PREFIX)/lib -L$(CHICKEN_PREFIX)/lib64" $(CHICKEN_PREFIX)/bin/chicken-install postgresql > postgresql.done


nanomsg.done : $(CHICKEN_PREFIX)/lib/libnanomsg.so





	CSC_OPTIONS="-I$(CHICKEN_PREFIX)/include -L$(CHICKEN_PREFIX)/lib -L$(CHICKEN_PREFIX)/lib64" $(CHICKEN_PREFIX)/bin/chicken-install nanomsg > nanomsg.done

iup.done : $(CHICKEN_PREFIX)/lib/libcallback.a
	CSC_OPTIONS="-I$(CHICKEN_PREFIX)/include -L$(CHICKEN_PREFIX)/lib" $(CHICKEN_PREFIX)/bin/chicken-install -D no-library-checks -feature disable-iup-web -feature disable-iup-pplot -feature disable-iup-matrixex iup > iup.done

canvas-draw.done :
	CSC_OPTIONS="-I$(CHICKEN_PREFIX)/include -L$(CHICKEN_PREFIX)/lib" $(CHICKEN_PREFIX)/bin/chicken-install -D no-library-checks canvas-draw > canvas-draw.done







|






>
|




>
>
>
>
>
>
>
|


>
|
>
>
>
>
>







111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
ALL_CKBIN=chicken chicken-bind chicken-bug chicken-dump			\
chicken-install chicken-profile chicken-sqlite3 chicken-status		\
chicken-uninstall csc csi feathers nanocat sqlite3 vacuumdb logpro	\
refdb

CKBIN_WRAPPERS=$(addprefix $(PREFIX)/bin/,$(ALL_CKBIN))

$(PREFIX)/bin/% : $(CHICKEN_PREFIX)/bin/% $(CHICKEN_PREFIX)/bin/csi
	utils/mk_wrapper_tool $(PREFIX) $* $(PREFIX)/bin/$*
	chmod a+x $(PREFIX)/bin/$*

$(PREFIX)/bin :
	mkdir -p $(PREFIX)/bin $(CHICKEN_PREFIX)/bin

# For the future -   binwrappers
chicken : $(PREFIX)/bin $(CHICKEN_PREFIX)/bin/csi  postgresql.done nanomsg.done iup.done canvas-draw.done sqlite3.done sql-de-lite.done dbi.done  $(EGGSTARG2)
	@echo "Fake target to build prefix chicken"

binwrappers : $(CKBIN_WRAPPERS)

# make the dep a dummy if not requiring our own build of postgres
ifeq ($(BUILD_POSTGRES),yes)
PG_DEP=$(CHICKEN_PREFIX)/bin/pg_config
else
PG_DEP=$(CHICKEN_PREFIX)/bin/csi
endif

postgresql.done : $(PG_DEP)
	CSC_OPTIONS="-I$(CHICKEN_PREFIX)/include -L$(CHICKEN_PREFIX)/lib -L$(CHICKEN_PREFIX)/lib64" $(CHICKEN_PREFIX)/bin/chicken-install postgresql > postgresql.done

ifeq ($(BUILD_NANOMSG),yes)
NMSG_DEP=$(CHICKEN_PREFIX)/lib/libnanomsg.so
else
NMSG_DEP=$(CHICKEN_PREFIX)/bin/csi
endif

nanomsg.done : $(NMSG_DEP)
	CSC_OPTIONS="-I$(CHICKEN_PREFIX)/include -L$(CHICKEN_PREFIX)/lib -L$(CHICKEN_PREFIX)/lib64" $(CHICKEN_PREFIX)/bin/chicken-install nanomsg > nanomsg.done

iup.done : $(CHICKEN_PREFIX)/lib/libcallback.a
	CSC_OPTIONS="-I$(CHICKEN_PREFIX)/include -L$(CHICKEN_PREFIX)/lib" $(CHICKEN_PREFIX)/bin/chicken-install -D no-library-checks -feature disable-iup-web -feature disable-iup-pplot -feature disable-iup-matrixex iup > iup.done

canvas-draw.done :
	CSC_OPTIONS="-I$(CHICKEN_PREFIX)/include -L$(CHICKEN_PREFIX)/lib" $(CHICKEN_PREFIX)/bin/chicken-install -D no-library-checks canvas-draw > canvas-draw.done

Modified common.scm from [33c7316880] to [3f88276a39].

486
487
488
489
490
491
492









493
494
495
496
497
498
499
500
        ;;     copy <file>.hrs.gz <file>.days.gz
        (when (>= (age-wks daysfile) 1)
          (copy daysfile wksfile)
          (copy hrsfile daysfile))
        #t)
      #f))
  









        
        
;; Rotate logs, logic: 
;;                 if > 500k and older than 1 week:
;;                     remove previous compressed log and compress this log
;; WARNING: This proc operates assuming that it is in the directory above the
;;          logs directory you wish to log-rotate.
;;







>
>
>
>
>
>
>
>
>
|







486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
        ;;     copy <file>.hrs.gz <file>.days.gz
        (when (>= (age-wks daysfile) 1)
          (copy daysfile wksfile)
          (copy hrsfile daysfile))
        #t)
      #f))
  
(define (common:safe-vector-ref vec indx default)
  (if (vector? vec)
      (handle-exceptions
	  exn
	(begin
	  (debug:print-info 0 *default-log-port* "remote data issue: exn=" exn)
	  default)
	(vector-ref vec indx))
      default))

        
;; Rotate logs, logic: 
;;                 if > 500k and older than 1 week:
;;                     remove previous compressed log and compress this log
;; WARNING: This proc operates assuming that it is in the directory above the
;;          logs directory you wish to log-rotate.
;;
2705
2706
2707
2708
2709
2710
2711





























2712
2713
2714
2715
2716
2717
2718
     ((string? proc)(system proc))
     (proc          (proc)))
    (hash-table-for-each
     vars
     (lambda (var val)
       (setenv var val)))
    vars))































(define (common:run-a-command cmd #!key (with-vars #f) (with-orig-env #f))
  (let* ((pre-cmd  (dtests:get-pre-command))
         (post-cmd (dtests:get-post-command))
         (fullcmd  (if (or pre-cmd post-cmd)
                       (conc pre-cmd cmd post-cmd)







>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>







2714
2715
2716
2717
2718
2719
2720
2721
2722
2723
2724
2725
2726
2727
2728
2729
2730
2731
2732
2733
2734
2735
2736
2737
2738
2739
2740
2741
2742
2743
2744
2745
2746
2747
2748
2749
2750
2751
2752
2753
2754
2755
2756
     ((string? proc)(system proc))
     (proc          (proc)))
    (hash-table-for-each
     vars
     (lambda (var val)
       (setenv var val)))
    vars))

(define (common:propogate-mt-vars-to-subrun proc propogate-vars)
  (let ((vars      (make-hash-table))
        (var-patt  "^MT_.*"))
    (for-each
     (lambda (vardat) ;; each env var
       ;(for-each
      ;(lambda (var-patt)
	  (if (string-match var-patt (car vardat))
	      (let ((var (car vardat))
		    (val (cdr vardat)))
		(hash-table-set! vars var val)
                 (if (member var propogate-vars)
                  (begin
                  (print var "  " (string-substitute "MT_" "PARENT_" var))
                  (setenv (string-substitute "MT_" "PARENT_"  var) val)))
		(unsetenv var))))
;	var-patts))
     (get-environment-variables))
    (cond
     ((string? proc)(system proc))
     (proc          (proc)))
    (hash-table-for-each
     vars
     (lambda (var val)
         (if (member var propogate-vars)
         (unsetenv (string-substitute "MT_" "PARENT_" var)))  
       (setenv var val)))
    vars))


(define (common:run-a-command cmd #!key (with-vars #f) (with-orig-env #f))
  (let* ((pre-cmd  (dtests:get-pre-command))
         (post-cmd (dtests:get-post-command))
         (fullcmd  (if (or pre-cmd post-cmd)
                       (conc pre-cmd cmd post-cmd)

Modified configf.scm from [b115fef76f] to [83ecc5b24c].

779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
    ht))

;; if 
(define (configf:read-alist fname)
  (handle-exceptions
      exn
    (begin
      (debug:print 0 *default-log-port* "read of alist " fname " failed. exn=" exn)
      #f)
    (configf:alist->config
     (with-input-from-file fname read))))

(define (configf:write-alist cdat fname)
  (if (not (common:faux-lock fname))
      (debug:print 0 *default-log-port* "INFO: Could not get lock on " fname))







|







779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
    ht))

;; if 
(define (configf:read-alist fname)
  (handle-exceptions
      exn
    (begin
      (debug:print-info 0 *default-log-port* "unable to read alist " fname ". exn=" exn)
      #f)
    (configf:alist->config
     (with-input-from-file fname read))))

(define (configf:write-alist cdat fname)
  (if (not (common:faux-lock fname))
      (debug:print 0 *default-log-port* "INFO: Could not get lock on " fname))

Modified dashboard.scm from [935bf4d2df] to [627ca6b765].

1898
1899
1900
1901
1902
1903
1904











1905
1906
1907
1908
1909
1910
1911
1912
1913
1914
1915
1916




1917
1918
1919
1920
1921
1922
1923
1924
1925
1926
1927
1928
                        ;;                                             userdata: (conc "run-id: " run-id))))
                        (hash-table-set! (dboard:tabdat-path-run-ids tabdat) run-path run-id)
                        ;; (set! colnum (+ colnum 1))
                        ))))
	      run-ids)))

(define (dashboard:tests-ht->tests-dat tests-ht)











  (reverse
   (sort
    (hash-table-values tests-ht)
    (lambda (a b) 
      (let ((a-test-name  (db:test-get-testname a))
            (a-item-path  (db:test-get-item-path a))
            (b-test-name  (db:test-get-testname b))
            (b-item-path  (db:test-get-item-path b))
            (a-event-time (db:test-get-event_time a))
            (b-event-time (db:test-get-event_time b)))
        (if (not (equal? a-test-name b-test-name))
            (> a-event-time b-event-time)




            (cond
             ((< 0 (string-compare3 a-test-name b-test-name)) #t)
             ((> 0 (string-compare3 a-test-name b-test-name)) #f)
             ((< 0 (string-compare3 a-item-path b-item-path)) #t)
             (else #f))))))))


(define (dashboard:run-id->tests-mindat run-id tabdat runs-hash)
  (let* ((run          (hash-table-ref/default runs-hash run-id #f))
         (key-vals     (rmt:get-key-vals run-id))
         (testnamepatt (or (dboard:tabdat-test-patts tabdat) "%/%"))
         (tests-ht     (dboard:get-tests-for-run-duplicate tabdat run-id run testnamepatt key-vals))







>
>
>
>
>
>
>
>
>
>
>
|
|
|
|
|
|
|
|
|
|
|
|
>
>
>
>
|
|
|
|
|







1898
1899
1900
1901
1902
1903
1904
1905
1906
1907
1908
1909
1910
1911
1912
1913
1914
1915
1916
1917
1918
1919
1920
1921
1922
1923
1924
1925
1926
1927
1928
1929
1930
1931
1932
1933
1934
1935
1936
1937
1938
1939
1940
1941
1942
1943
                        ;;                                             userdata: (conc "run-id: " run-id))))
                        (hash-table-set! (dboard:tabdat-path-run-ids tabdat) run-path run-id)
                        ;; (set! colnum (+ colnum 1))
                        ))))
	      run-ids)))

(define (dashboard:tests-ht->tests-dat tests-ht)
  (let ((oldest-item (make-hash-table))) ;;
    ;; populate the oldest-item table
    (for-each
     (lambda (tdat)
       (let ((tname (db:test-get-testname tdat))
	     (etime (db:test-get-event_time tdat)))
	 (if (hash-table-exists? oldest-item tname)
	     (if (< (hash-table-ref oldest-item tname) etime)
		 (hash-table-set! oldest-item tname etime))
	     (hash-table-set! oldest-item tname etime))))
     (hash-table-values tests-ht))
    (reverse
     (sort
      (hash-table-values tests-ht)
      (lambda (a b) 
	(let ((a-test-name  (db:test-get-testname a))
	      (a-item-path  (db:test-get-item-path a))
	      (b-test-name  (db:test-get-testname b))
	      (b-item-path  (db:test-get-item-path b))
	      (a-event-time (db:test-get-event_time a))
	      (b-event-time (db:test-get-event_time b)))
	  (if (equal? a-test-name b-test-name)
	      (> a-event-time b-event-time)
	      (> (hash-table-ref oldest-item a-test-name)
		 (hash-table-ref oldest-item b-test-name)))))))))
;;	  (if (not (equal? a-test-name b-test-name))
;;	      (> a-event-time b-event-time)
;;	      (cond
;;	       ((< 0 (string-compare3 a-test-name b-test-name)) #t)
;;	       ((> 0 (string-compare3 a-test-name b-test-name)) #f)
;;	       ((< 0 (string-compare3 a-item-path b-item-path)) #t)
;;	       (else #f)))))))))


(define (dashboard:run-id->tests-mindat run-id tabdat runs-hash)
  (let* ((run          (hash-table-ref/default runs-hash run-id #f))
         (key-vals     (rmt:get-key-vals run-id))
         (testnamepatt (or (dboard:tabdat-test-patts tabdat) "%/%"))
         (tests-ht     (dboard:get-tests-for-run-duplicate tabdat run-id run testnamepatt key-vals))
2013
2014
2015
2016
2017
2018
2019


2020
2021
2022
2023
2024
2025
2026

                (if (> max-col (string->number (iup:attribute run-matrix "NUMCOL")))
                    (iup:attribute-set! run-matrix "NUMCOL" max-col ))

                (let ((effective-max-row (if (< max-row max-visible) max-visible max-row)))
                  (if (> effective-max-row (string->number (iup:attribute run-matrix "NUMLIN")))
                      (iup:attribute-set! run-matrix "NUMLIN" effective-max-row )))


                
                ;; Row labels
                (for-each (lambda (ind)
                            (let* ((name (car ind))
                                   (num  (cadr ind))
                                   (key  (conc num ":0")))
                              (if (not (equal? (iup:attribute run-matrix key) name))







>
>







2028
2029
2030
2031
2032
2033
2034
2035
2036
2037
2038
2039
2040
2041
2042
2043

                (if (> max-col (string->number (iup:attribute run-matrix "NUMCOL")))
                    (iup:attribute-set! run-matrix "NUMCOL" max-col ))

                (let ((effective-max-row (if (< max-row max-visible) max-visible max-row)))
                  (if (> effective-max-row (string->number (iup:attribute run-matrix "NUMLIN")))
                      (iup:attribute-set! run-matrix "NUMLIN" effective-max-row )))

		(iup:attribute-set! run-matrix "WIDTHDEF" 16)
                
                ;; Row labels
                (for-each (lambda (ind)
                            (let* ((name (car ind))
                                   (num  (cadr ind))
                                   (key  (conc num ":0")))
                              (if (not (equal? (iup:attribute run-matrix key) name))
2052
2053
2054
2055
2056
2057
2058
2059
2060
2061
2062
2063
2064
2065
2066
2067
2068
2069
2070
2071
2072
2073
2074
2075
                                  (begin
                                    (set! changed #t)
                                    (iup:attribute-set! run-matrix key (cadr value))
                                    (iup:attribute-set! run-matrix (conc "BGCOLOR" key) (car value))))))
                          matrix-content)
                
                ;; Col labels - do after setting Cell contents so they are accounted for in the size calc.
                
                (for-each (lambda (ind)
                            (let* ((name (car ind))
                                   (num  (cadr ind))
                                   (key  (conc "0:" num)))
                              (if (not (equal? (iup:attribute run-matrix key) name))
                                  (begin
                                    (set! changed #t)
                                    (iup:attribute-set! run-matrix key name)
                                    (if (<= num max-col)
                                        (iup:attribute-set! run-matrix "FITTOTEXT" (conc "C" num)))))))
                          col-indices)
                
                (if (and (eq? pass-num 0) changed)
                    (loop 1 #t)) ;; force second pass due to column labels changing
                
                ;; (debug:print 0 *default-log-port* "runs-summary-updater, changed: " changed " pass-num: " pass-num)







|







|
|







2069
2070
2071
2072
2073
2074
2075
2076
2077
2078
2079
2080
2081
2082
2083
2084
2085
2086
2087
2088
2089
2090
2091
2092
                                  (begin
                                    (set! changed #t)
                                    (iup:attribute-set! run-matrix key (cadr value))
                                    (iup:attribute-set! run-matrix (conc "BGCOLOR" key) (car value))))))
                          matrix-content)
                
                ;; Col labels - do after setting Cell contents so they are accounted for in the size calc.

                (for-each (lambda (ind)
                            (let* ((name (car ind))
                                   (num  (cadr ind))
                                   (key  (conc "0:" num)))
                              (if (not (equal? (iup:attribute run-matrix key) name))
                                  (begin
                                    (set! changed #t)
                                    (iup:attribute-set! run-matrix key name) ;; (list->string (intersperse (string->list name) #\newline))) ;; name)
				    #;(if (<= num max-col)
                                        (iup:attribute-set! run-matrix "FITTOTEXT" (conc "C" num)))))))
                          col-indices)
                
                (if (and (eq? pass-num 0) changed)
                    (loop 1 #t)) ;; force second pass due to column labels changing
                
                ;; (debug:print 0 *default-log-port* "runs-summary-updater, changed: " changed " pass-num: " pass-num)

Modified db.scm from [fb3a18f52f] to [00e75ddfd8].

1774
1775
1776
1777
1778
1779
1780























1781
1782
1783
1784
1785
1786
1787
	  (debug:print 0 *default-log-port* "ERROR: cannot read " infile)
          (debug:print 0 *default-log-port* "ERROR: run-dir is " run-dir)
          #f
          )
        (with-input-from-file infile read-lines)
	)))
























;;  select end_time-now from
;;      (select testname,item_path,event_time+run_duration as
;;                          end_time,strftime('%s','now') as now from tests where state in
;;      ('RUNNING','REMOTEHOSTSTART','LAUNCHED'));

(define (db:find-and-mark-incomplete dbstruct run-id ovr-deadtime)
  (let* ((incompleted '())







>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>







1774
1775
1776
1777
1778
1779
1780
1781
1782
1783
1784
1785
1786
1787
1788
1789
1790
1791
1792
1793
1794
1795
1796
1797
1798
1799
1800
1801
1802
1803
1804
1805
1806
1807
1808
1809
1810
	  (debug:print 0 *default-log-port* "ERROR: cannot read " infile)
          (debug:print 0 *default-log-port* "ERROR: run-dir is " run-dir)
          #f
          )
        (with-input-from-file infile read-lines)
	)))

;; check duration against test-run.dat file if it exists and update the value in
;; the db if necessary
;;
(define (db:adjust-run-duration dbstruct test-id run-dir event-time run-duration)
  (let* ((datf             (conc run-dir ".mt_data/test-run.dat"))
	 (modt             (if (and (file-exists? datf)
				    (file-read-access? datf))
			       (file-modification-time datf)
			       #f)) ;; (+ event-time run-duration))))
	 (alt-run-duration (if modt
			       (- modt event-time)
			       #f)))
    (if (and alt-run-duration
	     (> alt-run-duration run-duration))
	(begin
	  (debug:print 0 *default-log-port* "Test " test-id " run duration mismatch. Setting to " alt-run-duration)
	  (db:with-db
	   dbstruct #f #f
	   (lambda (db)
	     (sqlite3:execute db "UPDATE tests SET run_duration=? WHERE id=?;" alt-run-duration test-id)
	     #t)))
	#f))) ;; #f = we did NOT adjust the time
	      
;;  select end_time-now from
;;      (select testname,item_path,event_time+run_duration as
;;                          end_time,strftime('%s','now') as now from tests where state in
;;      ('RUNNING','REMOTEHOSTSTART','LAUNCHED'));

(define (db:find-and-mark-incomplete dbstruct run-id ovr-deadtime)
  (let* ((incompleted '())
1826
1827
1828
1829
1830
1831
1832

1833
1834
1835
1836
1837
1838
1839
1840
1841
1842
1843
1844
1845
1846
1847
1848

1849
1850
1851
1852
1853
1854
1855
1856
1857
1858
1859
1860
1861
1862
1863
1864
1865
1866
	 ;; HOWEVER: this code in run:test seems to work fine
	 ;;              (> (- (current-seconds)(+ (db:test-get-event_time testdat)
	 ;;                     (db:test-get-run_duration testdat)))
	 ;;                    600) 
	 ;; (db:delay-if-busy dbdat)
	 (sqlite3:for-each-row 
	  (lambda (test-id run-dir uname testname item-path event-time run-duration)

	    (if (and (equal? uname "n/a")
		     (equal? item-path "")) ;; this is a toplevel test
		;; what to do with toplevel? call rollup?
		(begin
		  (set! toplevels   (cons (list test-id run-dir uname testname item-path run-id) toplevels))
		  (debug:print-info 0 *default-log-port* "Found old toplevel test in RUNNING state, test-id=" test-id))
		(begin
		  (set! incompleted (cons (list test-id run-dir uname testname item-path run-id) incompleted))
		  (debug:print-info 0 *default-log-port* "Found old test in RUNNING state, test-id="
				    test-id" exceeded running-deadtime "running-deadtime" now="(current-seconds)
				    " event-time="event-time" run-duration="run-duration))))
	  stmth1
	  run-id running-deadtime) ;; default time 720 seconds
       
	 (sqlite3:for-each-row 
	  (lambda (test-id run-dir uname testname item-path event-time run-duration)

	    (if (and (equal? uname "n/a")
		     (equal? item-path "")) ;; this is a toplevel test
		;; what to do with toplevel? call rollup?
		(begin
		  (set! toplevels   (cons (list test-id run-dir uname testname item-path run-id) toplevels))
		  (debug:print-info 0 *default-log-port* "Found old toplevel test in RUNNING state, test-id=" test-id))
		(begin
		  (debug:print-info 0 *default-log-port* "Found old test in REMOTEHOSTSTART state, test-id=" test-id
				    " exceeded running-deadtime "running-deadtime" now="(current-seconds)" event-time="event-time
				    " run-duration="run-duration)
		  (set! incompleted (cons (list test-id run-dir uname testname item-path run-id) incompleted)))))
	  stmth2
	  run-id remotehoststart-deadtime) ;; default time 230 seconds
	 
	 ;; in LAUNCHED for more than one day. Could be long due to job queues TODO/BUG: Need override for this in config
	 ;;
	 ;; (db:delay-if-busy dbdat)
	 (sqlite3:for-each-row







>
|
|
|
|
|
|
|
|
|
|
|


|


>
|
|
|
|
|
|
|
|
|
|
|







1849
1850
1851
1852
1853
1854
1855
1856
1857
1858
1859
1860
1861
1862
1863
1864
1865
1866
1867
1868
1869
1870
1871
1872
1873
1874
1875
1876
1877
1878
1879
1880
1881
1882
1883
1884
1885
1886
1887
1888
1889
1890
1891
	 ;; HOWEVER: this code in run:test seems to work fine
	 ;;              (> (- (current-seconds)(+ (db:test-get-event_time testdat)
	 ;;                     (db:test-get-run_duration testdat)))
	 ;;                    600) 
	 ;; (db:delay-if-busy dbdat)
	 (sqlite3:for-each-row 
	  (lambda (test-id run-dir uname testname item-path event-time run-duration)
	    (if (not (db:adjust-run-duration dbstruct test-id run-dir event-time run-duration))
		(if (and (equal? uname "n/a")
			 (equal? item-path "")) ;; this is a toplevel test
		    ;; what to do with toplevel? call rollup?
		    (begin
		      (set! toplevels   (cons (list test-id run-dir uname testname item-path run-id) toplevels))
		      (debug:print-info 0 *default-log-port* "Found old toplevel test in RUNNING state, test-id=" test-id))
		    (begin
		      (set! incompleted (cons (list test-id run-dir uname testname item-path run-id) incompleted))
		      (debug:print-info 0 *default-log-port* "Found old test in RUNNING state, test-id="
					test-id" exceeded running-deadtime "running-deadtime" now="(current-seconds)
					" event-time="event-time" run-duration="run-duration)))))
	  stmth1
	  run-id running-deadtime) ;; default time 720 seconds
	    
	 (sqlite3:for-each-row 
	  (lambda (test-id run-dir uname testname item-path event-time run-duration)
	    (if (not (db:adjust-run-duration dbstruct test-id run-dir event-time run-duration))
		(if (and (equal? uname "n/a")
			 (equal? item-path "")) ;; this is a toplevel test
		    ;; what to do with toplevel? call rollup?
		    (begin
		      (set! toplevels   (cons (list test-id run-dir uname testname item-path run-id) toplevels))
		      (debug:print-info 0 *default-log-port* "Found old toplevel test in RUNNING state, test-id=" test-id))
		    (begin
		      (debug:print-info 0 *default-log-port* "Found old test in REMOTEHOSTSTART state, test-id=" test-id
					" exceeded running-deadtime "running-deadtime" now="(current-seconds)" event-time="event-time
					" run-duration="run-duration)
		      (set! incompleted (cons (list test-id run-dir uname testname item-path run-id) incompleted))))))
	  stmth2
	  run-id remotehoststart-deadtime) ;; default time 230 seconds
	 
	 ;; in LAUNCHED for more than one day. Could be long due to job queues TODO/BUG: Need override for this in config
	 ;;
	 ;; (db:delay-if-busy dbdat)
	 (sqlite3:for-each-row
3213
3214
3215
3216
3217
3218
3219
3220
3221
3222
3223
3224
3225
3226
3227
3228
3229
3230
3231
3232
3233
3234
3235
3236
3237
3238
3239
3240
3241
3242
3243
3244
3245
3246
3247
3248
3249
3250
3251
3252
3253
3254
3255
3256
3257
3258
3259




3260
3261
3262
3263
3264
3265
3266
3267
3268
3269
3270
3271
3272
3273
3274
3275
3276
3277
3278
3279
3280
3281
3282
3283
3284
3285
3286
3287
3288
3289
3290
3291
3292
       (if newstatus  (sqlite3:execute db "UPDATE tests SET status=?  WHERE id=?;" newstatus  test-id))
       (if newcomment (sqlite3:execute db "UPDATE tests SET comment=? WHERE id=?;" newcomment ;; (sdb:qry 'getid newcomment)
				       test-id))))))
  (mt:process-triggers dbstruct run-id test-id newstate newstatus))

;; NEW BEHAVIOR: Count tests running in all runs!
;;
(define (db:get-count-tests-running dbstruct run-id fastmode)
  (let* ((qry (if fastmode
		  "SELECT count(id) FROM tests WHERE state in ('RUNNING','LAUNCHED','REMOTEHOSTSTART') AND NOT (uname = 'n/a' AND item_path = '') LIMIT 1;"
		  "SELECT count(id) FROM tests WHERE state in ('RUNNING','LAUNCHED','REMOTEHOSTSTART') AND NOT (uname = 'n/a' AND item_path = '');")))
  (db:with-db
   dbstruct
   run-id
   #f
   (lambda (db)
     (let* ((stmth (db:get-cache-stmth dbstruct  db qry)))
       (sqlite3:first-result stmth))))))

;; NEW BEHAVIOR: Count tests running in only one run!
;;
(define (db:get-count-tests-actually-running dbstruct run-id)
  (db:with-db
   dbstruct
   run-id
   #f
   (lambda (db)
     (sqlite3:first-result
      db
      ;; WARNING BUG EDIT ME - merged from v1.55 - not sure what is right here ...
      ;; "SELECT count(id) FROM tests WHERE state in ('RUNNING','LAUNCHED','REMOTEHOSTSTART') AND run_id NOT IN (SELECT id FROM runs WHERE state='deleted') AND NOT (uname = 'n/a' AND item_path = '');")
      "SELECT count(id) FROM tests WHERE state in ('RUNNING','REMOTEHOSTSTART','LAUNCHED') AND run_id=?;" 
      run-id)))) ;; NOT IN (SELECT id FROM runs WHERE state='deleted');")

;; NEW BEHAVIOR: Look only at single run with run-id
;; 
;; (define (db:get-running-stats dbstruct run-id)
(define (db:get-count-tests-running-for-run-id dbstruct run-id fastmode)
  (let* ((qry (if fastmode
		  "SELECT count(id) FROM tests WHERE state in ('RUNNING','LAUNCHED','REMOTEHOSTSTART') AND run_id=? LIMIT 1;"
		  "SELECT count(id) FROM tests WHERE state in ('RUNNING','LAUNCHED','REMOTEHOSTSTART') AND run_id=?;")))
    (db:with-db
     dbstruct
     run-id
     #f
     (lambda (db)
       (let* ((stmth (db:get-cache-stmth dbstruct db qry)))




	 (sqlite3:first-result stmth run-id))))))

;; For a given testname how many items are running? Used to determine
;; probability for regenerating html
;;
(define (db:get-count-tests-running-for-testname dbstruct run-id testname)
  (db:with-db
   dbstruct
   run-id
   #f
   (lambda (db)
     (let* ((stmt "SELECT count(id) FROM tests WHERE state in ('RUNNING','LAUNCHED','REMOTEHOSTSTART') AND run_id=? AND NOT (uname = 'n/a' AND item_path = '') AND testname=?;")
	    (stmth (db:get-cache-stmth dbstruct db stmt)))
       (sqlite3:first-result
	stmth run-id testname)))))

(define (db:get-not-completed-cnt dbstruct run-id)
(db:with-db
   dbstruct
   run-id
   #f
   (lambda (db)
      ;(print "SELECT count(id) FROM tests WHERE state not in ('COMPLETED', 'DELETED') AND run_id=" run-id)  
     (sqlite3:first-result
      db
      "SELECT count(id) FROM tests WHERE state not in ('COMPLETED', 'DELETED') AND run_id=?;" run-id))))

(define (db:get-count-tests-running-in-jobgroup dbstruct run-id jobgroup)
  (if (not jobgroup)
      0 ;; 
      (let ((testnames '()))
	;; get the testnames
	(db:with-db







|
<
<
|
|
|
|
|
|
|
|



















|
<
<
|






>
>
>
>
|












|
|


|




|
|
|
|







3238
3239
3240
3241
3242
3243
3244
3245


3246
3247
3248
3249
3250
3251
3252
3253
3254
3255
3256
3257
3258
3259
3260
3261
3262
3263
3264
3265
3266
3267
3268
3269
3270
3271
3272
3273


3274
3275
3276
3277
3278
3279
3280
3281
3282
3283
3284
3285
3286
3287
3288
3289
3290
3291
3292
3293
3294
3295
3296
3297
3298
3299
3300
3301
3302
3303
3304
3305
3306
3307
3308
3309
3310
3311
3312
3313
3314
3315
3316
3317
       (if newstatus  (sqlite3:execute db "UPDATE tests SET status=?  WHERE id=?;" newstatus  test-id))
       (if newcomment (sqlite3:execute db "UPDATE tests SET comment=? WHERE id=?;" newcomment ;; (sdb:qry 'getid newcomment)
				       test-id))))))
  (mt:process-triggers dbstruct run-id test-id newstate newstatus))

;; NEW BEHAVIOR: Count tests running in all runs!
;;
(define (db:get-count-tests-running dbstruct run-id)


  (let* ((qry  "SELECT count(id) FROM tests WHERE state in ('RUNNING','LAUNCHED','REMOTEHOSTSTART') AND NOT (uname = 'n/a' AND item_path = '');"))
    (db:with-db
     dbstruct
     run-id
     #f
     (lambda (db)
       (let* ((stmth (db:get-cache-stmth dbstruct db qry)))
	 (sqlite3:first-result stmth))))))

;; NEW BEHAVIOR: Count tests running in only one run!
;;
(define (db:get-count-tests-actually-running dbstruct run-id)
  (db:with-db
   dbstruct
   run-id
   #f
   (lambda (db)
     (sqlite3:first-result
      db
      ;; WARNING BUG EDIT ME - merged from v1.55 - not sure what is right here ...
      ;; "SELECT count(id) FROM tests WHERE state in ('RUNNING','LAUNCHED','REMOTEHOSTSTART') AND run_id NOT IN (SELECT id FROM runs WHERE state='deleted') AND NOT (uname = 'n/a' AND item_path = '');")
      "SELECT count(id) FROM tests WHERE state in ('RUNNING','REMOTEHOSTSTART','LAUNCHED') AND run_id=?;" 
      run-id)))) ;; NOT IN (SELECT id FROM runs WHERE state='deleted');")

;; NEW BEHAVIOR: Look only at single run with run-id
;; 
;; (define (db:get-running-stats dbstruct run-id)
(define (db:get-count-tests-running-for-run-id dbstruct run-id)


  (let* ((qry "SELECT count(id) FROM tests WHERE state in ('RUNNING','LAUNCHED','REMOTEHOSTSTART') AND run_id=?;"))
    (db:with-db
     dbstruct
     run-id
     #f
     (lambda (db)
       (let* ((stmth (db:get-cache-stmth dbstruct db qry)))
	 (sqlite3:fold-row
	  (lambda (res val) val)
	  0 stmth run-id))))))

;;	 (sqlite3:first-result stmth run-id))))))

;; For a given testname how many items are running? Used to determine
;; probability for regenerating html
;;
(define (db:get-count-tests-running-for-testname dbstruct run-id testname)
  (db:with-db
   dbstruct
   run-id
   #f
   (lambda (db)
     (let* ((stmt "SELECT count(id) FROM tests WHERE state in ('RUNNING','LAUNCHED','REMOTEHOSTSTART') AND run_id=? AND NOT (uname = 'n/a' AND item_path = '') AND testname=?;")
	    (stmth (db:get-cache-stmth dbstruct db stmt)))
       (sqlite3:fold-row
	(lambda (res val) val) 0 stmth run-id testname)))))

(define (db:get-not-completed-cnt dbstruct run-id)
  (db:with-db
   dbstruct
   run-id
   #f
   (lambda (db)
     (let* ((stmt "SELECT count(id) FROM tests WHERE state not in ('COMPLETED', 'DELETED') AND run_id=?;"))
       (sqlite3:fold-row
	(lambda (res val) val)
	0 (db:get-cache-stmth dbstruct db stmt) run-id)))))

(define (db:get-count-tests-running-in-jobgroup dbstruct run-id jobgroup)
  (if (not jobgroup)
      0 ;; 
      (let ((testnames '()))
	;; get the testnames
	(db:with-db
3465
3466
3467
3468
3469
3470
3471
3472
3473
3474
3475
3476
3477
3478
3479
  (let* ((run-ids (db:get-all-run-ids mtdb)))
    (for-each 
     (lambda (run-id)
       (let ((testrecs (db:get-all-tests-info-by-run-id mtdb run-id)))
	 (db:prep-megatest.db-adj-test-ids (db:dbdat-get-db mtdb) run-id testrecs)))
     run-ids)))

;; Get test data using test_id, run-id is not used
;; 
(define (db:get-test-info-by-id dbstruct run-id test-id)
  (db:with-db
   dbstruct
   #f ;; run-id
   #f
   (lambda (db)







|







3490
3491
3492
3493
3494
3495
3496
3497
3498
3499
3500
3501
3502
3503
3504
  (let* ((run-ids (db:get-all-run-ids mtdb)))
    (for-each 
     (lambda (run-id)
       (let ((testrecs (db:get-all-tests-info-by-run-id mtdb run-id)))
	 (db:prep-megatest.db-adj-test-ids (db:dbdat-get-db mtdb) run-id testrecs)))
     run-ids)))

;; Get test data using test_id, run-id is not used - but it will be!
;; 
(define (db:get-test-info-by-id dbstruct run-id test-id)
  (db:with-db
   dbstruct
   #f ;; run-id
   #f
   (lambda (db)

Modified dcommon.scm from [0db7864f6b] to [a84560491e].

951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968

(define (dcommon:y->canvas y scalef yoffset)
  (+ yoffset (* y scalef)))

;; sizex, sizey     - canvas size
;; originx, originy - canvas origin
;;
(define (dcommon:initial-draw-tests cnv xadj yadj sizex sizey sizexmm sizeymm originx originy tests-draw-state sorted-testnames test-records)
  (let* ((dot-data ;; (map cdr (filter
		   ;; 	  (lambda (x)(equal? "node" (car x)))
	  (map string-split (tests:lazy-dot test-records "plain" sizex sizey))) ;; (tests:easy-dot test-records "plain")))
	 (xoffset	 (dcommon:get-xoffset tests-draw-state sizex xadj))
	 (yoffset        (dcommon:get-yoffset tests-draw-state sizey yadj))
	 (no-dot         (configf:lookup *configdat* "setup" "nodot"))
	 (boxh           15)
	 (boxw           10)
	 (margin         5)
	 (tests-info     (hash-table-ref tests-draw-state 'tests-info))







|
|
<
|







951
952
953
954
955
956
957
958
959

960
961
962
963
964
965
966
967

(define (dcommon:y->canvas y scalef yoffset)
  (+ yoffset (* y scalef)))

;; sizex, sizey     - canvas size
;; originx, originy - canvas origin
;;
(define (dcommon:initial-draw-tests cnv xadj yadj sizex sizey sizexmm sizeymm originx originy
				    tests-draw-state sorted-testnames test-records)

  (let* ((dot-data       (tests:lazy-dot test-records "plain" sizex sizey 'munged))
	 (xoffset	 (dcommon:get-xoffset tests-draw-state sizex xadj))
	 (yoffset        (dcommon:get-yoffset tests-draw-state sizey yadj))
	 (no-dot         (configf:lookup *configdat* "setup" "nodot"))
	 (boxh           15)
	 (boxw           10)
	 (margin         5)
	 (tests-info     (hash-table-ref tests-draw-state 'tests-info))

Modified ezsteps.scm from [5de5d166c7] to [ef12da0318].

103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
       (let* ((cmd (conc stepcmd " > " stepname ".log 2>&1")) ;; >outfile 2>&1 
	      (pid #f))
	 (let ((proc (lambda ()
		       (set! pid (process-run "/bin/bash" (list "-c" cmd))))))
	   (if subrun
               (begin
                 (debug:print-info 0 *default-log-port* "Running without MT_.* environment variables.")
                 (common:without-vars proc "^MT_.*"))
	       (proc)))
	 
         (with-output-to-file "Makefile.ezsteps"
           (lambda ()
             (print stepname ".log :")
             (print "\t" cmd)
             (if (common:file-exists? (conc stepname ".logpro"))







|







103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
       (let* ((cmd (conc stepcmd " > " stepname ".log 2>&1")) ;; >outfile 2>&1 
	      (pid #f))
	 (let ((proc (lambda ()
		       (set! pid (process-run "/bin/bash" (list "-c" cmd))))))
	   (if subrun
               (begin
                 (debug:print-info 0 *default-log-port* "Running without MT_.* environment variables.")
                 (common:propogate-mt-vars-to-subrun proc '("MT_TARGET" "MT_LINKTREE" "MT_RUNNAME")))
	       (proc)))
	 
         (with-output-to-file "Makefile.ezsteps"
           (lambda ()
             (print stepname ".log :")
             (print "\t" cmd)
             (if (common:file-exists? (conc stepname ".logpro"))

Modified launch.scm from [d0067277fa] to [04e753db63].

203
204
205
206
207
208
209
210
211
212
213
214
215
216


217
218
219
220
221
222
223
			   (round 
			    (- 
			     (current-seconds) 
			     start-seconds)))))
	 (kill-tries 0))
    ;; (tests:set-full-meta-info #f test-id run-id (calc-minutes) work-area)
    ;; (tests:set-full-meta-info test-id run-id (calc-minutes) work-area)
    (tests:set-full-meta-info #f test-id run-id (calc-minutes) work-area 10)

    (let loop ((minutes   (calc-minutes))
	       (cpu-load  (alist-ref 'adj-core-load (common:get-normalized-cpu-load #f)))
	       (disk-free (get-df (current-directory)))
               (last-sync (current-seconds)))
      (common:telemetry-log "zombie" (conc "launch:monitor-job - top of loop encountered at "(current-seconds)" with last-sync="last-sync))


      (let* ((over-time     (> (current-seconds) (+ last-sync update-period)))
             (new-cpu-load  (let* ((load  (alist-ref 'adj-core-load (common:get-normalized-cpu-load #f)))
                                   (delta (abs (- load cpu-load))))
                              (if (> delta 0.1) ;; don't bother updating with small changes
                                  load
                                  #f)))
             (new-disk-free (let* ((df    (if over-time ;; only get df every 30 seconds







|





|
>
>







203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
			   (round 
			    (- 
			     (current-seconds) 
			     start-seconds)))))
	 (kill-tries 0))
    ;; (tests:set-full-meta-info #f test-id run-id (calc-minutes) work-area)
    ;; (tests:set-full-meta-info test-id run-id (calc-minutes) work-area)
    (tests:set-full-meta-info #f test-id run-id (calc-minutes) work-area 10 update-db: #t)

    (let loop ((minutes   (calc-minutes))
	       (cpu-load  (alist-ref 'adj-core-load (common:get-normalized-cpu-load #f)))
	       (disk-free (get-df (current-directory)))
               (last-sync (current-seconds)))
      ;; (common:telemetry-log "zombie" (conc "launch:monitor-job -
      ;; top of loop encountered at "(current-seconds)" with
      ;; last-sync="last-sync))
      (let* ((over-time     (> (current-seconds) (+ last-sync update-period)))
             (new-cpu-load  (let* ((load  (alist-ref 'adj-core-load (common:get-normalized-cpu-load #f)))
                                   (delta (abs (- load cpu-load))))
                              (if (> delta 0.1) ;; don't bother updating with small changes
                                  load
                                  #f)))
             (new-disk-free (let* ((df    (if over-time ;; only get df every 30 seconds
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
             (do-sync       (or new-cpu-load new-disk-free over-time))

             (test-info   (rmt:get-test-info-by-id run-id test-id))
             (state       (db:test-get-state test-info))
             (status      (db:test-get-status test-info))
             (kill-reason  "no kill reason specified")
             (kill-job?    #f))
        (common:telemetry-log "zombie" (conc "launch:monitor-job - decision time encountered at "(current-seconds)" with last-sync="last-sync" do-sync="do-sync" over-time="over-time" update-period="update-period))
        (cond
         ((test-get-kill-request run-id test-id)
          (set! kill-reason "KILLING TEST since received kill request (KILLREQ)")
          (set! kill-job? #t))
         ((and runtlim (> (- (current-seconds) start-seconds) runtlim))
          (set! kill-reason (conc "KILLING TEST DUE TO TIME LIMIT EXCEEDED! Runtime=" (- (current-seconds) start-seconds) " seconds, limit=" runtlim))
          (set! kill-job? #t))
         ((equal? status "DEAD")
          (tests:update-central-meta-info run-id test-id new-cpu-load new-disk-free (calc-minutes) #f #f)
          (rmt:set-state-status-and-roll-up-items run-id test-id 'foo "RUNNING" "n/a" "was marked dead; really still running.")
          ;;(set! kill-reason "KILLING TEST because it was marked as DEAD by launch:handle-zombie-tests (might indicate really overloaded server or else overzealous setup.deadtime)") ;; MARK RUNNING
          (set! kill-job? #f)))

        (debug:print 4 *default-log-port* "cpu: " new-cpu-load " disk: " new-disk-free " last-sync: " last-sync " do-sync: " do-sync)
        (launch:handle-zombie-tests run-id)
        (when do-sync
          ;;(with-output-to-file (conc (getenv "MT_TEST_RUN_DIR") "/last-loadinfo.log" #:append)
          ;;  (lambda () (pp (list (current-seconds) new-cpu-load new-disk-free (calc-minutes)))))
          (common:telemetry-log "zombie" (conc  "launch:monitor-job - dosync started at "(current-seconds)))
          (tests:update-central-meta-info run-id test-id new-cpu-load new-disk-free (calc-minutes) #f #f)
          (common:telemetry-log "zombie" (conc "launch:monitor-job - dosync finished at "(current-seconds))))
        
	(if kill-job? 
	    (begin
              (debug:print-info 0 *default-log-port* "proceeding to kill test: "kill-reason)
	      (mutex-lock! m)
	      ;; NOTE: The pid can change as different steps are run. Do we need handshaking between this
	      ;;       section and the runit section? Or add a loop that tries three times with a 1/4 second
	      ;;       between tries?







|








|






|
<
<
<
|
<
<







233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256



257


258
259
260
261
262
263
264
             (do-sync       (or new-cpu-load new-disk-free over-time))

             (test-info   (rmt:get-test-info-by-id run-id test-id))
             (state       (db:test-get-state test-info))
             (status      (db:test-get-status test-info))
             (kill-reason  "no kill reason specified")
             (kill-job?    #f))
        #;(common:telemetry-log "zombie" (conc "launch:monitor-job - decision time encountered at "(current-seconds)" with last-sync="last-sync" do-sync="do-sync" over-time="over-time" update-period="update-period))
        (cond
         ((test-get-kill-request run-id test-id)
          (set! kill-reason "KILLING TEST since received kill request (KILLREQ)")
          (set! kill-job? #t))
         ((and runtlim (> (- (current-seconds) start-seconds) runtlim))
          (set! kill-reason (conc "KILLING TEST DUE TO TIME LIMIT EXCEEDED! Runtime=" (- (current-seconds) start-seconds) " seconds, limit=" runtlim))
          (set! kill-job? #t))
         ((equal? status "DEAD")
          (tests:update-central-meta-info run-id test-id new-cpu-load new-disk-free (calc-minutes) #f #f update-db: #t)
          (rmt:set-state-status-and-roll-up-items run-id test-id 'foo "RUNNING" "n/a" "was marked dead; really still running.")
          ;;(set! kill-reason "KILLING TEST because it was marked as DEAD by launch:handle-zombie-tests (might indicate really overloaded server or else overzealous setup.deadtime)") ;; MARK RUNNING
          (set! kill-job? #f)))

        (debug:print 4 *default-log-port* "cpu: " new-cpu-load " disk: " new-disk-free " last-sync: " last-sync " do-sync: " do-sync)
        (launch:handle-zombie-tests run-id)
        (if do-sync ;; save meta data about the running of this test



	    (tests:update-central-meta-info run-id test-id new-cpu-load new-disk-free (calc-minutes) #f #f))


	(if kill-job? 
	    (begin
              (debug:print-info 0 *default-log-port* "proceeding to kill test: "kill-reason)
	      (mutex-lock! m)
	      ;; NOTE: The pid can change as different steps are run. Do we need handshaking between this
	      ;;       section and the runit section? Or add a loop that tries three times with a 1/4 second
	      ;;       between tries?
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
	    (begin
	      (thread-sleep! 3) ;; (+ 3 (random 6))) ;; add some jitter to the call home time to spread out the db accesses
	      (if (hash-table-ref/default misc-flags 'keep-going #f)  ;; keep originals for cpu-load and disk-free unless they change more than the allowed delta
		  (loop (calc-minutes)
                        (or new-cpu-load cpu-load)
                        (or new-disk-free disk-free)
                        (if do-sync (current-seconds) last-sync)))))))
    (tests:update-central-meta-info run-id test-id (get-cpu-load) (get-df (current-directory))(calc-minutes) #f #f))) ;; NOTE: Checking twice for keep-going is intentional


(define (launch:execute encoded-cmd)
  (let* ((cmdinfo    (common:read-encoded-string encoded-cmd))
	 (tconfigreg #f))
    (setenv "MT_CMDINFO" encoded-cmd)
    ;;(bb-check-path msg: "launch:execute incoming")







|







307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
	    (begin
	      (thread-sleep! 3) ;; (+ 3 (random 6))) ;; add some jitter to the call home time to spread out the db accesses
	      (if (hash-table-ref/default misc-flags 'keep-going #f)  ;; keep originals for cpu-load and disk-free unless they change more than the allowed delta
		  (loop (calc-minutes)
                        (or new-cpu-load cpu-load)
                        (or new-disk-free disk-free)
                        (if do-sync (current-seconds) last-sync)))))))
    (tests:update-central-meta-info run-id test-id (get-cpu-load) (get-df (current-directory))(calc-minutes) #f #f update-db: #t))) ;; NOTE: Checking twice for keep-going is intentional


(define (launch:execute encoded-cmd)
  (let* ((cmdinfo    (common:read-encoded-string encoded-cmd))
	 (tconfigreg #f))
    (setenv "MT_CMDINFO" encoded-cmd)
    ;;(bb-check-path msg: "launch:execute incoming")
463
464
465
466
467
468
469



470
471
472
473
474
475
476
				(db:test-get-host        test-info)
				(begin
				  (debug:print 0 *default-log-port* "ERROR: failed to find a record for test-id " test-id ", exiting.")
				  (exit))))
		 (test-pid  (db:test-get-process_id  test-info)))
	    (cond
             ;; -mrw- I'm removing KILLREQ from this list so that a test in KILLREQ state is treated as a "do not run" flag.



	     ((member (db:test-get-state test-info) '("INCOMPLETE" "KILLED" "UNKNOWN" "STUCK")) ;; prior run of this test didn't complete, go ahead and try to rerun
	      (debug:print 0 *default-log-port* "INFO: test is INCOMPLETE or KILLED, treat this execute call as a rerun request")
	      ;; (tests:test-force-state-status! run-id test-id "REMOTEHOSTSTART" "n/a")

              (rmt:general-call 'set-test-start-time #f test-id)
              (rmt:test-set-state-status run-id test-id "REMOTEHOSTSTART" "n/a" #f)
	      ) ;; prime it for running







>
>
>







460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
				(db:test-get-host        test-info)
				(begin
				  (debug:print 0 *default-log-port* "ERROR: failed to find a record for test-id " test-id ", exiting.")
				  (exit))))
		 (test-pid  (db:test-get-process_id  test-info)))
	    (cond
             ;; -mrw- I'm removing KILLREQ from this list so that a test in KILLREQ state is treated as a "do not run" flag.
	     ;;((or (member (db:test-get-state test-info) '("INCOMPLETE" "KILLED" "UNKNOWN" "STUCK")) ;; prior run of this test didn't complete, go ahead and try to rerun
	     ;;	  (and (equal? (db:test-get-state test-info) "COMPLETED")                           ;; completed/abort => rerun if asked
	     ;;	       (member (db:test-get-status test-info) '("ABORT"))))
	     ((member (db:test-get-state test-info) '("INCOMPLETE" "KILLED" "UNKNOWN" "STUCK")) ;; prior run of this test didn't complete, go ahead and try to rerun
	      (debug:print 0 *default-log-port* "INFO: test is INCOMPLETE or KILLED, treat this execute call as a rerun request")
	      ;; (tests:test-force-state-status! run-id test-id "REMOTEHOSTSTART" "n/a")

              (rmt:general-call 'set-test-start-time #f test-id)
              (rmt:test-set-state-status run-id test-id "REMOTEHOSTSTART" "n/a" #f)
	      ) ;; prime it for running
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
;; 100% COMPLETED/ (PASS,FAIL,ABORT etc.) ==> COMPLETED / X where X is same as itemized rollup
;; > 3 RUNNING with not test_dead do nothing (run should already be RUNNING/ na
;; > 0 RUNNING and test_dead then send KILLREQ ==> COMPLETED
;; 0 RUNNING ==> this is actually the first condition, should not get here

(define (launch:end-of-run-check run-id )
    (let* ((not-completed-cnt (rmt:get-not-completed-cnt run-id))  
           (running-cnt (rmt:get-count-tests-running-for-run-id run-id #f)) ;; fastmode=no
           (all-test-launched (rmt:get-var (conc "lunch-complete-" run-id)))
           (current-state (rmt:get-run-state run-id))
           (current-status (rmt:get-run-status run-id)))
     ;;get-vars run-id to query metadata table to check if all completed. if all-test-launched = yes then only not-completed-cnt = 0 means everyting is completed if no entry found in the table do nothing 
     (debug:print 0 *default-log-port* "Running test cnt :" running-cnt)                      
     (rmt:set-state-status-and-roll-up-run  run-id current-state current-status)
     (runs:update-junit-test-reporter-xml run-id) 







|







729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
;; 100% COMPLETED/ (PASS,FAIL,ABORT etc.) ==> COMPLETED / X where X is same as itemized rollup
;; > 3 RUNNING with not test_dead do nothing (run should already be RUNNING/ na
;; > 0 RUNNING and test_dead then send KILLREQ ==> COMPLETED
;; 0 RUNNING ==> this is actually the first condition, should not get here

(define (launch:end-of-run-check run-id )
    (let* ((not-completed-cnt (rmt:get-not-completed-cnt run-id))  
           (running-cnt (rmt:get-count-tests-running-for-run-id run-id))
           (all-test-launched (rmt:get-var (conc "lunch-complete-" run-id)))
           (current-state (rmt:get-run-state run-id))
           (current-status (rmt:get-run-status run-id)))
     ;;get-vars run-id to query metadata table to check if all completed. if all-test-launched = yes then only not-completed-cnt = 0 means everyting is completed if no entry found in the table do nothing 
     (debug:print 0 *default-log-port* "Running test cnt :" running-cnt)                      
     (rmt:set-state-status-and-roll-up-run  run-id current-state current-status)
     (runs:update-junit-test-reporter-xml run-id) 
769
770
771
772
773
774
775


776
777
778
779
780
781
782
783
                 (item-path (vector-ref running-test 11)))
			       	(debug:print 0 *default-log-port* "test " test-name "/" item-path " not completed")
              (if (not (null? tal))
				  (loop (car tal) (cdr tal)))))))))))        
 
(define (launch:is-test-alive host pid)
  (if (and host pid (not (equal? host "n/a")))


      (let* ((cmd (conc "ssh " host " pstree -A " pid))
	     (output (with-input-from-pipe cmd read-lines)))
	(debug:print 2 *default-log-port* "Running " cmd " received " output)
	(if (eq? (length output) 0)
	   #f
	   #t))
      #t))
 







>
>
|







769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
                 (item-path (vector-ref running-test 11)))
			       	(debug:print 0 *default-log-port* "test " test-name "/" item-path " not completed")
              (if (not (null? tal))
				  (loop (car tal) (cdr tal)))))))))))        
 
(define (launch:is-test-alive host pid)
  (if (and host pid (not (equal? host "n/a")))
      (let* ((is-local (equal? host (get-host-name)))
	     (ssh-cmd   (if is-local " " (conc "ssh " host " ")))
	     (cmd (conc ssh-cmd "pstree -A " pid))
	     (output (with-input-from-pipe cmd read-lines)))
	(debug:print 2 *default-log-port* "Running " cmd " received " output)
	(if (eq? (length output) 0)
	   #f
	   #t))
      #t))
 

Modified megatest.scm from [0e58f17e0f] to [9752b7fe00].

521
522
523
524
525
526
527

528
529
530
531
532
533
534
         "-show-runconfig"
         "-show-config"
         "-show-cmdinfo"
	 "-cleanup-db"))
       (no-watchdog-args-vals (filter (lambda (x) x)
                                      (map args:get-arg no-watchdog-args)))
       (start-watchdog (null? no-watchdog-args-vals)))

  ;;(BB> "no-watchdog-args="no-watchdog-args "no-watchdog-args-vals="no-watchdog-args-vals) 
  (if start-watchdog
      (thread-start! *watchdog*)))


;; bracket open-output-file with code to make leading directory if it does not exist and handle exceptions
(define (open-logfile logpath-in)







>







521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
         "-show-runconfig"
         "-show-config"
         "-show-cmdinfo"
	 "-cleanup-db"))
       (no-watchdog-args-vals (filter (lambda (x) x)
                                      (map args:get-arg no-watchdog-args)))
       (start-watchdog (null? no-watchdog-args-vals)))
       ;;(print  "no-watchdog-args="no-watchdog-args "no-watchdog-args-vals="no-watchdog-args-vals " start-watchdog-specail-arg-val:" start-watchdog-specail-arg-val " start-watchdog:" start-watchdog) 
  ;;(BB> "no-watchdog-args="no-watchdog-args "no-watchdog-args-vals="no-watchdog-args-vals) 
  (if start-watchdog
      (thread-start! *watchdog*)))


;; bracket open-output-file with code to make leading directory if it does not exist and handle exceptions
(define (open-logfile logpath-in)

Modified rmt.scm from [39d97c528a] to [05738b4bdc].

52
53
54
55
56
57
58



















59
60
61
62
63
64
65


66
67
68
69
70
71
72
73
	      cinfo
	      (if (server:check-if-running areapath)
		  (client:setup areapath)
		  #f))))

(define *send-receive-mutex* (make-mutex)) ;; should have separate mutex per run-id




















;; RA => e.g. usage (rmt:send-receive 'get-var #f (list varname))
;;
(define (rmt:send-receive cmd rid params #!key (attemptnum 1)(area-dat #f)) ;; start attemptnum at 1 so the modulo below works as expected

  #;(common:telemetry-log (conc "rmt:"(->string cmd))
                        payload: `((rid . ,rid)
                                   (params . ,params)))


                          
  (if (> attemptnum 2)
      (debug:print 0 *default-log-port* "INFO: attemptnum in rmt:send-receive is " attemptnum))
    
  (cond
   ((> attemptnum 2) (thread-sleep! 0.05))
   ((> attemptnum 10) (thread-sleep! 0.5))
   ((> attemptnum 20) (thread-sleep! 1)))







>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>







>
>
|







52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
	      cinfo
	      (if (server:check-if-running areapath)
		  (client:setup areapath)
		  #f))))

(define *send-receive-mutex* (make-mutex)) ;; should have separate mutex per run-id

(define *rmt-query-last-call-time* 0)
(define *rmt-query-last-rest-time* 0) ;; last time there was at least a 1/2 second rest - giving other processes access to the db

;; NOTE: This query rest algorythm will not adapt to long query times. REDESIGN NEEDED. TODO. FIXME.
;;
(define (rmt:query-rest cmd rid params)
  (let* ((now (current-milliseconds)))
    (cond
     ((> (- now *rmt-query-last-call-time*) 500)  ;; it's been a while since last query - no need to rest
      (set! *rmt-query-last-rest-time*  now)
      (set! *rmt-query-last-call-time*  now))
     ((> (- now *rmt-query-last-rest-time*) 5000) ;; no natural rests have happened
      (debug:print 0 *default-log-port* "query rest needed. blocking for 1/2 second. cmd="cmd", run id="rid", params="params)
      (thread-sleep! 0.5) ;; force a rest of a half second
      (set! *rmt-query-last-rest-time* now)
      (set! *rmt-query-last-call-time* now))
     (else ;; sufficient rests have occurred, just record the last query time
      (set! *rmt-query-last-call-time* now)))))

;; RA => e.g. usage (rmt:send-receive 'get-var #f (list varname))
;;
(define (rmt:send-receive cmd rid params #!key (attemptnum 1)(area-dat #f)) ;; start attemptnum at 1 so the modulo below works as expected

  #;(common:telemetry-log (conc "rmt:"(->string cmd))
                        payload: `((rid . ,rid)
                                   (params . ,params)))
  (if (not (equal? (configf:lookup *configdat* "setup" "query-rest") "no"))
      (rmt:query-rest cmd rid params))
  
  (if (> attemptnum 2)
      (debug:print 0 *default-log-port* "INFO: attemptnum in rmt:send-receive is " attemptnum))
    
  (cond
   ((> attemptnum 2) (thread-sleep! 0.05))
   ((> attemptnum 10) (thread-sleep! 0.5))
   ((> attemptnum 20) (thread-sleep! 1)))
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
				  (vector #t '())) ;; should always get a vector but if something goes wrong return a dummy
				(if (and (vector? v)
					 (> (vector-length v) 1))
				    (let ((newvec (vector (vector-ref v 0)(vector-ref v 1))))
				      newvec)           ;; by copying the vector while inside the error handler we should force the detection of a corrupted record
				    (vector #t '()))))  ;; we could also check that the returned types are valid
			     (vector #t '())))
	 (success        (vector-ref resdat 0))
	 (res            (vector-ref resdat 1))
	 (duration       (- (current-milliseconds) start)))
    (if (and read-only qry-is-write)
        (debug:print 0 *default-log-port* "ERROR: attempt to write to read-only database ignored. cmd=" cmd))
    (if (not success)
	(if (> remretries 0)
	    (begin
	      (debug:print-error 0 *default-log-port* "local query failed. Trying again.")
	      (thread-sleep! (/ (random 5000) 1000)) ;; some random delay 
	      (rmt:open-qry-close-locally cmd run-id params remretries: (- remretries 1)))
	    (begin
	      (debug:print-error 0 *default-log-port* "too many retries in rmt:open-qry-close-locally, giving up")
	      #f))
	(begin
	  ;; (rmt:update-db-stats run-id cmd params duration)
	  ;; mark this run as dirty if this was a write, the watchdog is responsible for syncing it
	  (if qry-is-write
	      (let ((start-time (current-seconds)))
		(mutex-lock! *db-multi-sync-mutex*)
/		(set! *db-last-access* start-time)  ;; THIS IS PROBABLY USELESS? (we are on a client)
                (mutex-unlock! *db-multi-sync-mutex*)))))
    res))

(define (rmt:send-receive-no-auto-client-setup connection-info cmd run-id params)
  (let* ((run-id   (if run-id run-id 0))
	 (res  	   (handle-exceptions
		       exn







|
|


















|







388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
				  (vector #t '())) ;; should always get a vector but if something goes wrong return a dummy
				(if (and (vector? v)
					 (> (vector-length v) 1))
				    (let ((newvec (vector (vector-ref v 0)(vector-ref v 1))))
				      newvec)           ;; by copying the vector while inside the error handler we should force the detection of a corrupted record
				    (vector #t '()))))  ;; we could also check that the returned types are valid
			     (vector #t '())))
	 (success        (common:safe-vector-ref resdat 0 #f)) ;; (vector-ref resdat 0))
	 (res            (common:safe-vector-ref resdat 1 #f)) ;; (vector-ref resdat 1))
	 (duration       (- (current-milliseconds) start)))
    (if (and read-only qry-is-write)
        (debug:print 0 *default-log-port* "ERROR: attempt to write to read-only database ignored. cmd=" cmd))
    (if (not success)
	(if (> remretries 0)
	    (begin
	      (debug:print-error 0 *default-log-port* "local query failed. Trying again.")
	      (thread-sleep! (/ (random 5000) 1000)) ;; some random delay 
	      (rmt:open-qry-close-locally cmd run-id params remretries: (- remretries 1)))
	    (begin
	      (debug:print-error 0 *default-log-port* "too many retries in rmt:open-qry-close-locally, giving up")
	      #f))
	(begin
	  ;; (rmt:update-db-stats run-id cmd params duration)
	  ;; mark this run as dirty if this was a write, the watchdog is responsible for syncing it
	  (if qry-is-write
	      (let ((start-time (current-seconds)))
		(mutex-lock! *db-multi-sync-mutex*)
		(set! *db-last-access* start-time)  ;; THIS IS PROBABLY USELESS? (we are on a client)
                (mutex-unlock! *db-multi-sync-mutex*)))))
    res))

(define (rmt:send-receive-no-auto-client-setup connection-info cmd run-id params)
  (let* ((run-id   (if run-id run-id 0))
	 (res  	   (handle-exceptions
		       exn
523
524
525
526
527
528
529
530
531
532
533
534

















535
536
537
538
539
540
541
;; Just some syntatic sugar
(define (rmt:register-test run-id test-name item-path)
  (rmt:general-call 'register-test run-id run-id test-name item-path))

(define (rmt:get-test-id run-id testname item-path)
  (rmt:send-receive 'get-test-id run-id (list run-id testname item-path)))

;; run-id is NOT used
;;
(define (rmt:get-test-info-by-id run-id test-id)
  (if (number? test-id)
      (rmt:send-receive 'get-test-info-by-id run-id (list run-id test-id))

















      (begin
	(debug:print 0 *default-log-port* "WARNING: Bad data handed to rmt:get-test-info-by-id run-id=" run-id ", test-id=" test-id)
	(print-call-chain (current-error-port))
	#f)))

(define (rmt:test-get-rundir-from-test-id run-id test-id)
  (rmt:send-receive 'test-get-rundir-from-test-id run-id (list run-id test-id)))







|



|
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>







544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
;; Just some syntatic sugar
(define (rmt:register-test run-id test-name item-path)
  (rmt:general-call 'register-test run-id run-id test-name item-path))

(define (rmt:get-test-id run-id testname item-path)
  (rmt:send-receive 'get-test-id run-id (list run-id testname item-path)))

;; run-id is NOT used - but it will be! 
;;
(define (rmt:get-test-info-by-id run-id test-id)
  (if (number? test-id)
      (let* ((testdat  (rmt:send-receive 'get-test-info-by-id run-id (list run-id test-id)))
             (trundir  (vector-ref testdat 10))
	     (trundatf (conc trundir"/.mt_data/test-run.dat")))
	;; now we can update a couple fields from the filesystem
	(handle-exceptions
	    exn
	    (begin
	      (debug:print-info 0 *default-log-port* "Could not update testdat record from "trundatf", exn=" exn)
	      #f)
	  (if (and trundir
		   (file-exists? trundatf))
	      (let* ((duration     (vector-ref testdat 12)) ;; (db:test-get-run_duration testdat))
		     (event-time   (vector-ref testdat 5))   ;; (db:test-get-event_time   testdat))
		     (last-touch   (file-modification-time trundatf))
		     (new-duration (max duration (- last-touch event-time))))
		(vector-set! testdat 12 new-duration))))
	      #;(db:test-set-run_duration! testdat (max duration (- last-touch event-time)))
	testdat)
      (begin
	(debug:print 0 *default-log-port* "WARNING: Bad data handed to rmt:get-test-info-by-id run-id=" run-id ", test-id=" test-id)
	(print-call-chain (current-error-port))
	#f)))

(define (rmt:test-get-rundir-from-test-id run-id test-id)
  (rmt:send-receive 'test-get-rundir-from-test-id run-id (list run-id test-id)))
659
660
661
662
663
664
665
666

667

668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
	   (map (lambda (run-id)
		  (rmt:send-receive 'test-get-paths-matching-keynames-target-new run-id (list run-id keynames target res testpatt statepatt statuspatt runname)))
	   run-ids))))

(define (rmt:get-prereqs-not-met run-id waitons ref-test-name ref-item-path #!key (mode '(normal))(itemmaps #f))
  (rmt:send-receive 'get-prereqs-not-met run-id (list run-id waitons ref-test-name ref-item-path mode itemmaps)))

(define (rmt:get-count-tests-running-for-run-id run-id fastmode)

  (rmt:send-receive 'get-count-tests-running-for-run-id run-id (list run-id fastmode)))


(define (rmt:get-not-completed-cnt run-id)
  (rmt:send-receive 'get-not-completed-cnt run-id (list run-id)))


;; Statistical queries

(define (rmt:get-count-tests-running run-id fastmode)
  (rmt:send-receive 'get-count-tests-running run-id (list run-id fastmode)))

(define (rmt:get-count-tests-running-for-testname run-id testname)
  (rmt:send-receive 'get-count-tests-running-for-testname run-id (list run-id testname)))

(define (rmt:get-count-tests-running-in-jobgroup run-id jobgroup)
  (rmt:send-receive 'get-count-tests-running-in-jobgroup run-id (list run-id jobgroup)))








|
>
|
>







|
|







697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
	   (map (lambda (run-id)
		  (rmt:send-receive 'test-get-paths-matching-keynames-target-new run-id (list run-id keynames target res testpatt statepatt statuspatt runname)))
	   run-ids))))

(define (rmt:get-prereqs-not-met run-id waitons ref-test-name ref-item-path #!key (mode '(normal))(itemmaps #f))
  (rmt:send-receive 'get-prereqs-not-met run-id (list run-id waitons ref-test-name ref-item-path mode itemmaps)))

(define (rmt:get-count-tests-running-for-run-id run-id)
  (if (number? run-id)
      (rmt:send-receive 'get-count-tests-running-for-run-id run-id (list run-id))
      0))

(define (rmt:get-not-completed-cnt run-id)
  (rmt:send-receive 'get-not-completed-cnt run-id (list run-id)))


;; Statistical queries

(define (rmt:get-count-tests-running run-id)
  (rmt:send-receive 'get-count-tests-running run-id (list run-id)))

(define (rmt:get-count-tests-running-for-testname run-id testname)
  (rmt:send-receive 'get-count-tests-running-for-testname run-id (list run-id testname)))

(define (rmt:get-count-tests-running-in-jobgroup run-id jobgroup)
  (rmt:send-receive 'get-count-tests-running-in-jobgroup run-id (list run-id jobgroup)))

Modified runs.scm from [030b929939] to [d0c781d218].

59
60
61
62
63
64
65
66



























67
68
69
70
71
72
73
  (last-jobs-check-time    0)
  )

(defstruct runs:testdat
  hed tal reg reruns  test-record
  test-name item-path jobgroup
  waitons testmode  newtal itemmaps prereqs-not-met)
  



























;; look in the $MT_RUN_AREA_HOME/.softlocks directory for key-host-pid.softlock files
;;  - remove any that are over 3600 seconds old
;;  - if there are any that are younger than 10 seconds
;;      * sleep 10 seconds
;;      * touch my key-host-pid.softlock file
;;      * return
;;  - if there are no files younger than 10 seconds







|
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>







59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
  (last-jobs-check-time    0)
  )

(defstruct runs:testdat
  hed tal reg reruns  test-record
  test-name item-path jobgroup
  waitons testmode  newtal itemmaps prereqs-not-met)

(module runsmod
    (
     runs:wait-if-seen-recently
     )
  
(import scheme chicken data-structures extras files)
(import posix typed-records srfi-18 srfi-69
	  md5 message-digest
	  regex srfi-1)

(define *last-seen-ht* (make-hash-table))

(define (runs:wait-if-seen-recently wait-until . keys)
  (let* ((full-key   (string-intersperse keys "-"))
	 (last-seen  (hash-table-ref/default *last-seen-ht* full-key 0))
	 (now        (current-seconds))
	 (delta      (- now last-seen))
	 (needed     (if (< delta wait-until)
			 0
			 (- wait-until delta))))
    (if (> needed 0)(thread-sleep! needed))
    (hash-table-set! *last-seen-ht* full-key (current-seconds))
    needed))
)

(import runsmod)
    
;; look in the $MT_RUN_AREA_HOME/.softlocks directory for key-host-pid.softlock files
;;  - remove any that are over 3600 seconds old
;;  - if there are any that are younger than 10 seconds
;;      * sleep 10 seconds
;;      * touch my key-host-pid.softlock file
;;      * return
;;  - if there are no files younger than 10 seconds
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
  ;; Take advantage of a good place to exit if running the one-pass methodology
  (if (and (> (runs:dat-can-run-more-tests-count runsdat) 20)
	   (args:get-arg "-one-pass"))
      (exit 0))

  (if (runs:dat-load-mgmt-function runsdat)((runs:dat-load-mgmt-function runsdat)))

  (let* ((num-running             (rmt:get-count-tests-running run-id #f)) ;; fastmode=no
	 (num-running-in-jobgroup (rmt:get-count-tests-running-in-jobgroup run-id jobgroup))
	 (job-group-limit         (let ((jobg-count (configf:lookup *configdat* "jobgroups" jobgroup)))
				    (if (string? jobg-count)
					(string->number jobg-count)
					jobg-count))))
    (if (> (+ num-running num-running-in-jobgroup) 0)
	(runs:inc-can-run-more-tests-count runsdat)) ;; (set! *runs:can-run-more-tests-count* (+ *runs:can-run-more-tests-count* 1)))







|







346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
  ;; Take advantage of a good place to exit if running the one-pass methodology
  (if (and (> (runs:dat-can-run-more-tests-count runsdat) 20)
	   (args:get-arg "-one-pass"))
      (exit 0))

  (if (runs:dat-load-mgmt-function runsdat)((runs:dat-load-mgmt-function runsdat)))

  (let* ((num-running             (rmt:get-count-tests-running run-id)) 
	 (num-running-in-jobgroup (rmt:get-count-tests-running-in-jobgroup run-id jobgroup))
	 (job-group-limit         (let ((jobg-count (configf:lookup *configdat* "jobgroups" jobgroup)))
				    (if (string? jobg-count)
					(string->number jobg-count)
					jobg-count))))
    (if (> (+ num-running num-running-in-jobgroup) 0)
	(runs:inc-can-run-more-tests-count runsdat)) ;; (set! *runs:can-run-more-tests-count* (+ *runs:can-run-more-tests-count* 1)))
433
434
435
436
437
438
439


440
441
442
443
444
445
446
	      (debug:print-info 0 *default-log-port* "running run-post-hook: \"" run-post-hook "\", log is " actual-logf)
	      (system (conc run-post-hook " >> " actual-logf " 2>&1"))
	      (debug:print-info 0 *default-log-port* "post-hook \"" run-post-hook "\" took " (- (current-seconds) start-time) " seconds to run."))))))

;; return #t when all items in waitors-upon list are represented in test-patt, #f otherwise.
(define (runs:testpatts-mention-waitors-upon? test-patt waitors-upon)
  (null? (tests:filter-test-names-not-matched waitors-upon test-patt)))



;;======================================================================
;; runs:run-tests is called from megatest.scm and itself
;;======================================================================
;;
;;  test-names: Comma separated patterns same as test-patts but used in selection 
;;              of tests to run. The item portions are not respected.







>
>







460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
	      (debug:print-info 0 *default-log-port* "running run-post-hook: \"" run-post-hook "\", log is " actual-logf)
	      (system (conc run-post-hook " >> " actual-logf " 2>&1"))
	      (debug:print-info 0 *default-log-port* "post-hook \"" run-post-hook "\" took " (- (current-seconds) start-time) " seconds to run."))))))

;; return #t when all items in waitors-upon list are represented in test-patt, #f otherwise.
(define (runs:testpatts-mention-waitors-upon? test-patt waitors-upon)
  (null? (tests:filter-test-names-not-matched waitors-upon test-patt)))

(define *find-and-mark-incomplete-last-run* (make-hash-table))

;;======================================================================
;; runs:run-tests is called from megatest.scm and itself
;;======================================================================
;;
;;  test-names: Comma separated patterns same as test-patts but used in selection 
;;              of tests to run. The item portions are not respected.
743
744
745
746
747
748
749
750
751





752
753
754
755
756
757
758
759
					  "runs:run-tests-queue"))
		 (th2        (make-thread (lambda ()			 ;; BBQ: why are we visiting ALL runs here?	    
					    ;; (rmt:find-and-mark-incomplete-all-runs))))) CAN'T INTERRUPT IT ...
					    (let ((run-ids (rmt:get-all-run-ids)))
					      (for-each (lambda (run-id)
							  (if keep-going
							      (handle-exceptions
							       exn
							       (debug:print 0 *default-log-port* "error in calling find-and-mark-incomplete for run-id " run-id ", exn=" exn)





							       (rmt:find-and-mark-incomplete run-id #f)))) ;; ovr-deadtime))) ;; could be root of https://hsdes.intel.com/appstore/article/#/220546828/main -- Title: Megatest jobs show DEAD even though they are still running (1.64/27)
							run-ids)))
					  "runs: mark-incompletes")))
	    ;; (thread-start! th1)
	    (thread-start! th2)
	    ;; (thread-join! th1)
	    ;; just do the main stuff in the main thread
	    (runs:run-tests-queue run-id runname test-records keyvals flags test-patts required-tests







|
|
>
>
>
>
>
|







772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
					  "runs:run-tests-queue"))
		 (th2        (make-thread (lambda ()			 ;; BBQ: why are we visiting ALL runs here?	    
					    ;; (rmt:find-and-mark-incomplete-all-runs))))) CAN'T INTERRUPT IT ...
					    (let ((run-ids (rmt:get-all-run-ids)))
					      (for-each (lambda (run-id)
							  (if keep-going
							      (handle-exceptions
								  exn
								  (debug:print 0 *default-log-port* "error in calling find-and-mark-incomplete for run-id " run-id ", exn=" exn)
								;; lets run this only if a run has been NOT seen for more than 900 seconds
								(if (> (- (current-seconds)(hash-table-ref/default *find-and-mark-incomplete-last-run* run-id 0)) 900)
								    (begin
								      (rmt:find-and-mark-incomplete run-id #f)
								      (hash-table-set! *find-and-mark-incomplete-last-run* run-id (current-seconds)))
								    )))) ;; ovr-deadtime))) ;; could be root of https://hsdes.intel.com/appstore/article/#/220546828/main -- Title: Megatest jobs show DEAD even though they are still running (1.64/27)
							run-ids)))
					  "runs: mark-incompletes")))
	    ;; (thread-start! th1)
	    (thread-start! th2)
	    ;; (thread-join! th1)
	    ;; just do the main stuff in the main thread
	    (runs:run-tests-queue run-id runname test-records keyvals flags test-patts required-tests
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
     ;; If no resources are available just kill time and loop again
     ;;
     ((not have-resources) ;; simply try again after waiting a second
      (if (runs:lownoise "no resources" 60)
	  (debug:print-info 1 *default-log-port* "no resources to run new tests, waiting ..."))
      ;; Have gone back and forth on this but db starvation is an issue.
      ;; wait one second before looking again to run jobs.
      (thread-sleep! 0.25)
      ;; could have done hed tal here but doing car/cdr of newtal to rotate tests
      (list (car newtal)(cdr newtal) reg reruns))
     
     ;; This is the final stage, everything is in place so launch the test
     ;;
     ((and have-resources
	   (or (null? prereqs-not-met)







|







1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
     ;; If no resources are available just kill time and loop again
     ;;
     ((not have-resources) ;; simply try again after waiting a second
      (if (runs:lownoise "no resources" 60)
	  (debug:print-info 1 *default-log-port* "no resources to run new tests, waiting ..."))
      ;; Have gone back and forth on this but db starvation is an issue.
      ;; wait one second before looking again to run jobs.
      (thread-sleep! 1) ;; changed back to 1 from 0.25
      ;; could have done hed tal here but doing car/cdr of newtal to rotate tests
      (list (car newtal)(cdr newtal) reg reruns))
     
     ;; This is the final stage, everything is in place so launch the test
     ;;
     ((and have-resources
	   (or (null? prereqs-not-met)
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
				       ))
				   extras)
				  extras)
				'())))
	     (waitons     (delete-duplicates (append (tests:testqueue-get-waitons test-record) extra-waits) equal?))
	     (newtal      (append tal (list hed)))
	     (regfull     (>= (length reg) reglen))
	     (num-running (rmt:get-count-tests-running-for-run-id run-id #t)) ;; fastmode=yes
	     (testdat     (make-runs:testdat
			   hed: hed
			   tal: tal
			   reg: reg
			   reruns: reruns
			   test-record: test-record
			   test-name:   test-name







|







1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
				       ))
				   extras)
				  extras)
				'())))
	     (waitons     (delete-duplicates (append (tests:testqueue-get-waitons test-record) extra-waits) equal?))
	     (newtal      (append tal (list hed)))
	     (regfull     (>= (length reg) reglen))
	     (num-running (rmt:get-count-tests-running-for-run-id run-id))
	     (testdat     (make-runs:testdat
			   hed: hed
			   tal: tal
			   reg: reg
			   reruns: reruns
			   test-record: test-record
			   test-name:   test-name
1713
1714
1715
1716
1717
1718
1719



1720
1721
1722
1723
1724
1725
1726
				  ;; wait for load here
				  (if (runs:dat-load-mgmt-function runsdat)((runs:dat-load-mgmt-function runsdat)))
				  (loop-can-run-more (runs:can-run-more-tests runsdat run-id jobgroup max-concurrent-jobs)
						     (- remtries 1)))))))
		       )))))

	  ;; I'm not clear on why prereqs are gathered here TODO: verfiy this is needed



	  (runs:testdat-prereqs-not-met-set! testdat (rmt:get-prereqs-not-met run-id waitons hed item-path mode: testmode itemmaps: itemmaps))

	  ;; I'm not clear on why we'd capture running job counts here TODO: verify this is needed
	  (runs:dat-can-run-more-tests-set! runsdat (runs:can-run-more-tests runsdat run-id jobgroup max-concurrent-jobs))

	  (let ((loop-list (runs:process-expanded-tests runsdat testdat))) ;; in process-expanded-tests ultimately run:test -> launch-test -> test actually running
            (if loop-list (apply loop loop-list))))







>
>
>







1747
1748
1749
1750
1751
1752
1753
1754
1755
1756
1757
1758
1759
1760
1761
1762
1763
				  ;; wait for load here
				  (if (runs:dat-load-mgmt-function runsdat)((runs:dat-load-mgmt-function runsdat)))
				  (loop-can-run-more (runs:can-run-more-tests runsdat run-id jobgroup max-concurrent-jobs)
						     (- remtries 1)))))))
		       )))))

	  ;; I'm not clear on why prereqs are gathered here TODO: verfiy this is needed
	  (let ((waited (runs:wait-if-seen-recently 5 "prereqs-not-met" hed item-path))) ;; if we've been down this path in the past 5 seconds - wait out the difference
	    (if (> waited 0)(debug:print 0 *default-log-port* "Waited for prereqs-not-met-"hed"-"item-path" for " waited "seconds.")))
	  
	  (runs:testdat-prereqs-not-met-set! testdat (rmt:get-prereqs-not-met run-id waitons hed item-path mode: testmode itemmaps: itemmaps))

	  ;; I'm not clear on why we'd capture running job counts here TODO: verify this is needed
	  (runs:dat-can-run-more-tests-set! runsdat (runs:can-run-more-tests runsdat run-id jobgroup max-concurrent-jobs))

	  (let ((loop-list (runs:process-expanded-tests runsdat testdat))) ;; in process-expanded-tests ultimately run:test -> launch-test -> test actually running
            (if loop-list (apply loop loop-list))))
1829
1830
1831
1832
1833
1834
1835
1836
1837
1838
1839
1840
1841
1842
1843
1844

1845
1846
1847
1848
1849
1850

1851
1852
1853
1854
1855
1856
1857
1858
1859
1860
1861
1862
1863
    (rmt:set-var (conc "lunch-complete-" run-id) "yes")  
        
    ;; now *if* -run-wait we wait for all tests to be done
    ;; Now wait for any RUNNING tests to complete (if in run-wait mode)
    ;; (if (runs:dat-load-mgmt-function runsdat)((runs:dat-load-mgmt-function runsdat)))
    (thread-sleep! 10) ;; I think there is a race condition here. Let states/statuses settle
    
    (let wait-loop ((num-running      (rmt:get-count-tests-running-for-run-id run-id #t)) ;; fastmode=yes
		    (prev-num-running 0))
      ;; (debug:print-info 13 *default-log-port* "num-running=" num-running ", prev-num-running=" prev-num-running)
      (if (and (or (args:get-arg "-run-wait")
		   (equal? (configf:lookup *configdat* "setup" "run-wait") "yes"))
	       (> num-running 0))
	  (begin
	    ;; Here we mark any old defunct tests as incomplete. Do this every fifteen minutes
	    ;; (debug:print 0 *default-log-port* "Got here eh! num-running=" num-running " (> num-running 0) " (> num-running 0))

	    (if (> (current-seconds)(+ last-time-incomplete 900))
		(let ((actual-num-running (rmt:get-count-tests-running-for-run-id run-id #f))) ;; fastmode=no
		  (debug:print-info 0 *default-log-port* "Marking stuck tests as INCOMPLETE while waiting for run " run-id
				    ". Running as pid " (current-process-id) " on " (get-host-name))
		  (set! last-time-incomplete (current-seconds)) ;; FIXME, this might be causing slow down - use of set!
		  (rmt:find-and-mark-incomplete run-id #f)

		  (debug:print-info 0 *default-log-port* "run-wait specified, waiting on " actual-num-running
				    " tests in RUNNING, REMOTEHOSTSTART or LAUNCHED state at "
				    (time->string (seconds->local-time (current-seconds))))))
	    ;; (if (runs:dat-load-mgmt-function runsdat)((runs:dat-load-mgmt-function runsdat)))
	    (thread-sleep! 5) ;; (if (>= num-running max-concurrent-jobs) 5 1))
	    (wait-loop (rmt:get-count-tests-running-for-run-id run-id #t) ;; fastmode=yes
		       num-running))))
    ;; LET* ((test-record
    ;; we get here on "drop through". All done!
    ;; this is moved to runs:run-testes since this function is getting called twice to ensure everthing is completed. 
    ;; (debug:print-info 0 *default-log-port* "Calling Post Hook")    
    ;; (runs:run-post-hook run-id)
    (debug:print-info 1 *default-log-port* "All tests launched")))







|








>
|
|


|

>





|







1866
1867
1868
1869
1870
1871
1872
1873
1874
1875
1876
1877
1878
1879
1880
1881
1882
1883
1884
1885
1886
1887
1888
1889
1890
1891
1892
1893
1894
1895
1896
1897
1898
1899
1900
1901
1902
    (rmt:set-var (conc "lunch-complete-" run-id) "yes")  
        
    ;; now *if* -run-wait we wait for all tests to be done
    ;; Now wait for any RUNNING tests to complete (if in run-wait mode)
    ;; (if (runs:dat-load-mgmt-function runsdat)((runs:dat-load-mgmt-function runsdat)))
    (thread-sleep! 10) ;; I think there is a race condition here. Let states/statuses settle
    
    (let wait-loop ((num-running      (rmt:get-count-tests-running-for-run-id run-id))
		    (prev-num-running 0))
      ;; (debug:print-info 13 *default-log-port* "num-running=" num-running ", prev-num-running=" prev-num-running)
      (if (and (or (args:get-arg "-run-wait")
		   (equal? (configf:lookup *configdat* "setup" "run-wait") "yes"))
	       (> num-running 0))
	  (begin
	    ;; Here we mark any old defunct tests as incomplete. Do this every fifteen minutes
	    ;; (debug:print 0 *default-log-port* "Got here eh! num-running=" num-running " (> num-running 0) " (> num-running 0))
	    (if (> (- (current-seconds)(hash-table-ref/default *find-and-mark-incomplete-last-run* run-id 0)) 900)
		;; (begin(if (> (current-seconds)(+ last-time-incomplete 900))
		(let ((actual-num-running (rmt:get-count-tests-running-for-run-id run-id)))
		  (debug:print-info 0 *default-log-port* "Marking stuck tests as INCOMPLETE while waiting for run " run-id
				    ". Running as pid " (current-process-id) " on " (get-host-name))
		  ;; (set! last-time-incomplete (current-seconds)) ;; FIXME, this might be causing slow down - use of set!
		  (rmt:find-and-mark-incomplete run-id #f)
		  (hash-table-set! *find-and-mark-incomplete-last-run* run-id (current-seconds))
		  (debug:print-info 0 *default-log-port* "run-wait specified, waiting on " actual-num-running
				    " tests in RUNNING, REMOTEHOSTSTART or LAUNCHED state at "
				    (time->string (seconds->local-time (current-seconds))))))
	    ;; (if (runs:dat-load-mgmt-function runsdat)((runs:dat-load-mgmt-function runsdat)))
	    (thread-sleep! 5) ;; (if (>= num-running max-concurrent-jobs) 5 1))
	    (wait-loop (rmt:get-count-tests-running-for-run-id run-id)
		       num-running))))
    ;; LET* ((test-record
    ;; we get here on "drop through". All done!
    ;; this is moved to runs:run-testes since this function is getting called twice to ensure everthing is completed. 
    ;; (debug:print-info 0 *default-log-port* "Calling Post Hook")    
    ;; (runs:run-post-hook run-id)
    (debug:print-info 1 *default-log-port* "All tests launched")))

Modified server.scm from [7b2af2dc7e] to [fc85e5121d].

324
325
326
327
328
329
330

331
332
333
334
335
336
337
;; wait for server=start-last to be three seconds old
;;
(define (server:wait-for-server-start-last-flag areapath)
  (let* ((start-flag (conc areapath "/logs/server-start-last"))
	 ;;; THIS INTERACTS WITH [server] timeout. Suggest using 0.1 or above for timeout (6 seconds)
	 (reftime    (configf:lookup-number *configdat* "server" "idletime" default: 4))
	 (server-key (conc (get-host-name) "-" (current-process-id))))

    (if (file-exists? start-flag)
	(let* ((fmodtime (file-modification-time start-flag))
	       (delta    (- (current-seconds) fmodtime))
	       (all-go   (> delta reftime)))
	  (if (and all-go
		   (begin
		     (with-output-to-file start-flag







>







324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
;; wait for server=start-last to be three seconds old
;;
(define (server:wait-for-server-start-last-flag areapath)
  (let* ((start-flag (conc areapath "/logs/server-start-last"))
	 ;;; THIS INTERACTS WITH [server] timeout. Suggest using 0.1 or above for timeout (6 seconds)
	 (reftime    (configf:lookup-number *configdat* "server" "idletime" default: 4))
	 (server-key (conc (get-host-name) "-" (current-process-id))))
    ;; (thread-sleep! (/ (random 500) 1000)) ;; I don't think this made a difference
    (if (file-exists? start-flag)
	(let* ((fmodtime (file-modification-time start-flag))
	       (delta    (- (current-seconds) fmodtime))
	       (all-go   (> delta reftime)))
	  (if (and all-go
		   (begin
		     (with-output-to-file start-flag

Modified tasks.scm from [b621e9649f] to [e136a37772].

441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
;; remove tasks given by a string of numbers comma separated
(define (tasks:remove-queue-entries dbstruct task-ids)
  (db:with-db
   dbstruct #f #t
   (lambda (db)
     (sqlite3:execute db (conc "DELETE FROM tasks_queue WHERE id IN (" task-ids ");")))))

#;(define (tasks:process-queue dbstruct)
  (let* ((task   (tasks:snag-a-task dbstruct))
	 (action (if task (tasks:task-get-action task) #f)))
    (if action (print "tasks:process-queue task: " task))
    (if action
	(case (string->symbol action)
	  ((run)       (tasks:start-run     dbstruct task))
	  ((remove)    (tasks:remove-runs   dbstruct task))
	  ((lock)      (tasks:lock-runs     dbstruct task))
	  ;; ((monitor)   (tasks:start-monitor db task))
	  #;((rollup)    (tasks:rollup-runs   dbstruct task))
	  ((updatemeta)(tasks:update-meta   dbstruct task))
	  #;((kill)      (tasks:kill-monitors dbstruct task))))))

(define (tasks:tasks->text tasks)
  (let ((fmtstr "~10a~10a~10a~12a~20a~12a~12a~10a"))
    (conc (format #f fmtstr "id" "action" "owner" "state" "target" "runname" "testpatts" "params") "\n"
	  (string-intersperse 
	   (map (lambda (task)
		  (format #f fmtstr







|
|
|
|
|
|
|
|
|
|
|
|
|







441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
;; remove tasks given by a string of numbers comma separated
(define (tasks:remove-queue-entries dbstruct task-ids)
  (db:with-db
   dbstruct #f #t
   (lambda (db)
     (sqlite3:execute db (conc "DELETE FROM tasks_queue WHERE id IN (" task-ids ");")))))

;; (define (tasks:process-queue dbstruct)
;;   (let* ((task   (tasks:snag-a-task dbstruct))
;; 	 (action (if task (tasks:task-get-action task) #f)))
;;     (if action (print "tasks:process-queue task: " task))
;;     (if action
;; 	(case (string->symbol action)
;; 	  ((run)       (tasks:start-run     dbstruct task))
;; 	  ((remove)    (tasks:remove-runs   dbstruct task))
;; 	  ((lock)      (tasks:lock-runs     dbstruct task))
;; 	  ;; ((monitor)   (tasks:start-monitor db task))
;; 	  #;((rollup)    (tasks:rollup-runs   dbstruct task))
;; 	  ((updatemeta)(tasks:update-meta   dbstruct task))
;; 	  #;((kill)      (tasks:kill-monitors dbstruct task))))))

(define (tasks:tasks->text tasks)
  (let ((fmtstr "~10a~10a~10a~12a~20a~12a~12a~10a"))
    (conc (format #f fmtstr "id" "action" "owner" "state" "target" "runname" "testpatts" "params") "\n"
	  (string-intersperse 
	   (map (lambda (task)
		  (format #f fmtstr
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821

;; gets mtpg-run-id and syncs the record if different
;;
(define (tasks:run-id->mtpg-run-id dbh cached-info run-id area-info smallest-last-update-time)
  (let* ((runs-ht (hash-table-ref cached-info 'runs))
	 (runinf  (hash-table-ref/default runs-ht run-id #f))
         (area-id (vector-ref area-info 0)))
       (if runinf
	runinf ;; already cached
	(let* ((run-dat    (rmt:get-run-info run-id))               ;; NOTE: get-run-info returns a vector < row header >
	       (run-name   (rmt:get-run-name-from-id run-id))
	       (row        (db:get-rows run-dat))                   ;; yes, this returns a single row
	       (header     (db:get-header run-dat))
	       (state      (db:get-value-by-header row header "state"))
	       (status     (db:get-value-by-header row header "status"))
	       (owner      (db:get-value-by-header row header "owner"))
	       (event-time (db:get-value-by-header row header "event_time"))
	       (comment    (db:get-value-by-header row header "comment"))
	       (fail-count (db:get-value-by-header row header "fail_count"))
	       (pass-count (db:get-value-by-header row header "pass_count"))
         (db-contour (db:get-value-by-header row header "contour"))
	       (contour    (if (args:get-arg "-prepend-contour") 
                                 (if (and db-contour (not (equal? db-contour ""))  (string? db-contour )) 
                                           (begin 
                                            (debug:print-info 1 *default-log-port*  "db-contour") 
 						db-contour)
					    (args:get-arg "-contour"))))
         (run-tag (if (args:get-arg "-run-tag")
                            (args:get-arg "-run-tag")
									""))
         (last-update (db:get-value-by-header row header "last_update"))
	       (keytarg    (if (or (args:get-arg "-prepend-contour") (args:get-arg "-prefix-target"))
	       			(conc "MT_CONTOUR/MT_AREA/" (string-intersperse (rmt:get-keys) "/")) (string-intersperse (rmt:get-keys) "/"))) ;; e.g. version/iteration/platform
	       (target     (if (or (args:get-arg "-prepend-contour") (args:get-arg "-prefix-target")) 
	       			(conc (or (args:get-arg "-prefix-target") (conc contour "/" (common:get-area-name) "/")) (rmt:get-target run-id)) (rmt:get-target run-id)))                 ;; e.g. v1.63/a3e1/ubuntu
	       (spec-id    (pgdb:get-ttype dbh keytarg))
	       (publish-time (if (args:get-arg "-cp-eventtime-to-publishtime")
                            event-time
                           (current-seconds))) 
	       (new-run-id (pgdb:get-run-id dbh spec-id target run-name area-id)))
         (if new-run-id
	         (begin ;; let ((run-record (pgdb:get-run-info dbh new-run-id))
		        (hash-table-set! runs-ht run-id new-run-id)
		;; ensure key fields are up to date
     ;; if last_update == pgdb_last_update do not update smallest-last-update-time  
    (let* ((pgdb-last-update (pgdb:get-run-last-update dbh new-run-id))
           (smallest-time (hash-table-ref/default smallest-last-update-time "smallest-time" #f)))
     (if (and  (> last-update pgdb-last-update) (or (not smallest-time) (< last-update smallest-time)))
        (hash-table-set! smallest-last-update-time "smallest-time" last-update)))
		(pgdb:refresh-run-info
		 dbh
		 new-run-id
		 state status owner event-time comment fail-count pass-count area-id last-update publish-time)
     (debug:print-info 0 *default-log-port* "Working on run-id " run-id " pgdb-id "  new-run-id )
     (if (not (equal? run-tag ""))
      (task:add-run-tag dbh new-run-id run-tag))
		new-run-id) 
      
	      (if (equal? state "deleted")
          (begin 
          (debug:print-info 1 *default-log-port*  "Warning: Run with id " run-id " was created after previous sync and deleted before the sync") #f)
          (if (handle-exceptions
		        exn
		        (begin (print-call-chain)
              (print ((condition-property-accessor 'exn 'message) exn))     
			      #f)
            
            (pgdb:insert-run
		     dbh
		     spec-id target run-name state status owner event-time comment fail-count pass-count  area-id last-update publish-time))
		       (let* ((smallest-time (hash-table-ref/default smallest-last-update-time "smallest-time" #f)))
             (if (or (not smallest-time) (< last-update smallest-time))
        				(hash-table-set! smallest-last-update-time "smallest-time" last-update))
             (tasks:run-id->mtpg-run-id dbh cached-info run-id area-info smallest-last-update-time))
		  #f)))))))

(define (task:add-run-tag dbh run-id tag) 
  (let* ((tag-info (pgdb:get-tag-info-by-name dbh tag)))
   (if (not tag-info)
     (begin   
     (if (handle-exceptions
	   exn







|












|

|
|
|
|
|
|

|
|

|

|


|
|

|
|
|

|
|
|
|
|




|
|
|

|

|
|
|
|
|
|

|
|
|
|
|
|
|
|
|







740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821

;; gets mtpg-run-id and syncs the record if different
;;
(define (tasks:run-id->mtpg-run-id dbh cached-info run-id area-info smallest-last-update-time)
  (let* ((runs-ht (hash-table-ref cached-info 'runs))
	 (runinf  (hash-table-ref/default runs-ht run-id #f))
         (area-id (vector-ref area-info 0)))
    (if runinf
	runinf ;; already cached
	(let* ((run-dat    (rmt:get-run-info run-id))               ;; NOTE: get-run-info returns a vector < row header >
	       (run-name   (rmt:get-run-name-from-id run-id))
	       (row        (db:get-rows run-dat))                   ;; yes, this returns a single row
	       (header     (db:get-header run-dat))
	       (state      (db:get-value-by-header row header "state"))
	       (status     (db:get-value-by-header row header "status"))
	       (owner      (db:get-value-by-header row header "owner"))
	       (event-time (db:get-value-by-header row header "event_time"))
	       (comment    (db:get-value-by-header row header "comment"))
	       (fail-count (db:get-value-by-header row header "fail_count"))
	       (pass-count (db:get-value-by-header row header "pass_count"))
	       (db-contour (db:get-value-by-header row header "contour"))
	       (contour    (if (args:get-arg "-prepend-contour") 
			       (if (and db-contour (not (equal? db-contour ""))  (string? db-contour )) 
				   (begin 
				     (debug:print-info 1 *default-log-port*  "db-contour") 
				     db-contour)
				   (args:get-arg "-contour"))))
	       (run-tag (if (args:get-arg "-run-tag")
                            (args:get-arg "-run-tag")
			    ""))
	       (last-update (db:get-value-by-header row header "last_update"))
	       (keytarg    (if (or (args:get-arg "-prepend-contour") (args:get-arg "-prefix-target"))
			       (conc "MT_CONTOUR/MT_AREA/" (string-intersperse (rmt:get-keys) "/")) (string-intersperse (rmt:get-keys) "/"))) ;; e.g. version/iteration/platform
	       (target     (if (or (args:get-arg "-prepend-contour") (args:get-arg "-prefix-target")) 
			       (conc (or (args:get-arg "-prefix-target") (conc contour "/" (common:get-area-name) "/")) (rmt:get-target run-id)) (rmt:get-target run-id)))                 ;; e.g. v1.63/a3e1/ubuntu
	       (spec-id    (pgdb:get-ttype dbh keytarg))
	       (publish-time (if (args:get-arg "-cp-eventtime-to-publishtime")
				 event-time
				 (current-seconds))) 
	       (new-run-id (pgdb:get-run-id dbh spec-id target run-name area-id)))
	  (if new-run-id
	      (begin ;; let ((run-record (pgdb:get-run-info dbh new-run-id))
		(hash-table-set! runs-ht run-id new-run-id)
		;; ensure key fields are up to date
		;; if last_update == pgdb_last_update do not update smallest-last-update-time  
		(let* ((pgdb-last-update (pgdb:get-run-last-update dbh new-run-id))
		       (smallest-time (hash-table-ref/default smallest-last-update-time "smallest-time" #f)))
		  (if (and  (> last-update pgdb-last-update) (or (not smallest-time) (< last-update smallest-time)))
		      (hash-table-set! smallest-last-update-time "smallest-time" last-update)))
		(pgdb:refresh-run-info
		 dbh
		 new-run-id
		 state status owner event-time comment fail-count pass-count area-id last-update publish-time)
		(debug:print-info 0 *default-log-port* "Working on run-id " run-id " pgdb-id "  new-run-id )
		(if (not (equal? run-tag ""))
		    (task:add-run-tag dbh new-run-id run-tag))
		new-run-id) 
	      
	      (if (equal? state "deleted")
		  (begin 
		    (debug:print-info 1 *default-log-port*  "Warning: Run with id " run-id " was created after previous sync and deleted before the sync") #f)
		  (if (handle-exceptions
		       exn
		       (begin (print-call-chain)
			      (print ((condition-property-accessor 'exn 'message) exn))     
			      #f)
		       
		       (pgdb:insert-run
			dbh
			spec-id target run-name state status owner event-time comment fail-count pass-count  area-id last-update publish-time))
		      (let* ((smallest-time (hash-table-ref/default smallest-last-update-time "smallest-time" #f)))
			(if (or (not smallest-time) (< last-update smallest-time))
			    (hash-table-set! smallest-last-update-time "smallest-time" last-update))
			(tasks:run-id->mtpg-run-id dbh cached-info run-id area-info smallest-last-update-time))
		      #f)))))))

(define (task:add-run-tag dbh run-id tag) 
  (let* ((tag-info (pgdb:get-tag-info-by-name dbh tag)))
   (if (not tag-info)
     (begin   
     (if (handle-exceptions
	   exn
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
	   (pgdb:insert-area-tag  dbh   (vector-ref tag-info 0)  (vector-ref area-info 0))))))

(define (tasks:sync-run-data dbh cached-info run-ids area-info smallest-last-update-time) 
  (for-each
     (lambda (run-id)
      (debug:print-info 1 *default-log-port*   "Check if run with " run-id " needs to be synced" )
       (tasks:run-id->mtpg-run-id dbh cached-info run-id area-info smallest-last-update-time))
run-ids))


;; get runs changed since last sync
;; (define (tasks:sync-test-data dbh cached-info area-info)
;;   (let* ((

(define (tasks:sync-to-postgres configdat dest)







|







1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
	   (pgdb:insert-area-tag  dbh   (vector-ref tag-info 0)  (vector-ref area-info 0))))))

(define (tasks:sync-run-data dbh cached-info run-ids area-info smallest-last-update-time) 
  (for-each
     (lambda (run-id)
      (debug:print-info 1 *default-log-port*   "Check if run with " run-id " needs to be synced" )
       (tasks:run-id->mtpg-run-id dbh cached-info run-id area-info smallest-last-update-time))
     run-ids))


;; get runs changed since last sync
;; (define (tasks:sync-test-data dbh cached-info area-info)
;;   (let* ((

(define (tasks:sync-to-postgres configdat dest)

Modified tests.scm from [0094b671e6] to [cd66dd6c01].

1699
1700
1701
1702
1703
1704
1705

















1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
1716
1717


1718
1719
1720
1721
1722
1723
1724
1725
1726
1727
1728
	;;     		  (lambda (x)(equal? "node" (car x)))
	;;     		  (map string-split (tests:easy-dot test-records "plain"))))))
	;;   (map car (sort data (lambda (a b)
	;;     		    (> (string->number (caddr a))(string->number (caddr b)))))))
	;; ))
	(sort all-tests sort-fn1)))) ;; avoid dealing with deleted tests, look at the hash table


















(define (tests:easy-dot test-records outtype)
  (let-values (((fd temp-path) (file-mkstemp (conc "/tmp/" (current-user-name) ".XXXXXX"))))
    (let ((all-testnames (hash-table-keys test-records))
	  (temp-port     (open-output-file* fd)))
      ;; (format temp-port "This file is ~A.~%" temp-path)
      (format temp-port "digraph tests {\n")
      (format temp-port "  size=4,8\n")
      ;; (format temp-port "   splines=none\n")
      (for-each
       (lambda (testname)
	 (let* ((testrec (hash-table-ref test-records testname))
		(waitons (or (tests:testqueue-get-waitons testrec) '())))


	   (for-each
	    (lambda (waiton)
	      (format temp-port (conc "   " waiton " -> " testname " [splines=ortho]\n")))
	    waitons)))
       all-testnames)
      (format temp-port "}\n")
      (close-output-port temp-port)
      (with-input-from-pipe
       (conc "env -i PATH=$PATH dot -T" outtype " < " temp-path)
       (lambda ()
	 (let ((res (read-lines)))







>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>











|
>
>



|







1699
1700
1701
1702
1703
1704
1705
1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
1716
1717
1718
1719
1720
1721
1722
1723
1724
1725
1726
1727
1728
1729
1730
1731
1732
1733
1734
1735
1736
1737
1738
1739
1740
1741
1742
1743
1744
1745
1746
1747
	;;     		  (lambda (x)(equal? "node" (car x)))
	;;     		  (map string-split (tests:easy-dot test-records "plain"))))))
	;;   (map car (sort data (lambda (a b)
	;;     		    (> (string->number (caddr a))(string->number (caddr b)))))))
	;; ))
	(sort all-tests sort-fn1)))) ;; avoid dealing with deleted tests, look at the hash table

;; look up all waitons that are related to test "testname"
;;
(define (tests:get-mt-waitons testname flatten)
  (let* ((mt-waitons    (configf:get-section *configdat* "waitons"))
	 (my-waitons    (filter
			 (lambda (x)
			   (string-match (conc "^(" testname "|" testname"/.*)$") (car x)))
			 mt-waitons)))
    (if flatten
	(map (lambda (w)
	       (car (string-split w "/")))
	     (apply append (map (lambda (x)
				  (string-split (cadr x)))
				my-waitons)))
	my-waitons)))

;; NOT USED
(define (tests:easy-dot test-records outtype)
  (let-values (((fd temp-path) (file-mkstemp (conc "/tmp/" (current-user-name) ".XXXXXX"))))
    (let ((all-testnames (hash-table-keys test-records))
	  (temp-port     (open-output-file* fd)))
      ;; (format temp-port "This file is ~A.~%" temp-path)
      (format temp-port "digraph tests {\n")
      (format temp-port "  size=4,8\n")
      ;; (format temp-port "   splines=none\n")
      (for-each
       (lambda (testname)
	 (let* ((testrec (hash-table-ref test-records testname))
		(waitons (or (tests:testqueue-get-waitons testrec) '()))
		(my-mt-waitons (tests:get-mt-waitons testname #t)))
	   ;; (print "my-mt-waitons=" my-mt-waitons)
	   (for-each
	    (lambda (waiton)
	      (format temp-port (conc "   " waiton " -> " testname " [splines=ortho]\n")))
	    (append waitons my-mt-waitons))))
       all-testnames)
      (format temp-port "}\n")
      (close-output-port temp-port)
      (with-input-from-pipe
       (conc "env -i PATH=$PATH dot -T" outtype " < " temp-path)
       (lambda ()
	 (let ((res (read-lines)))
1743
1744
1745
1746
1747
1748
1749


1750
1751
1752
1753
1754
1755
1756

1757
1758
1759
1760
1761
1762
1763
		   (tal (cdr all-testnames))
		   (res (list "digraph tests {"
			      (conc " size=\"" (or sizex 11) "," (or sizey 11) "\";")
			      " ratio=0.95;"
			      )))
	  (let* ((testrec (hash-table-ref test-records hed))
		 (waitons (or (tests:testqueue-get-waitons testrec) '()))


		 (newres  (append res
				  (if (null? waitons)
				      (list (conc "   \"" hed "\" [shape=box];"))
				      (map (lambda (waiton)
					     (conc "   \"" waiton "\" -> \"" hed "\" [shape=box];"))
					   waitons)
				      ))))

	    (if (null? tal)
		(append newres (list "}"))
		(loop (car tal)(cdr tal) newres)
		))))))

;; (tests:run-dot (list "digraph tests {" "a -> b" "}") "plain")








>
>

|



|
<
>







1762
1763
1764
1765
1766
1767
1768
1769
1770
1771
1772
1773
1774
1775
1776

1777
1778
1779
1780
1781
1782
1783
1784
		   (tal (cdr all-testnames))
		   (res (list "digraph tests {"
			      (conc " size=\"" (or sizex 11) "," (or sizey 11) "\";")
			      " ratio=0.95;"
			      )))
	  (let* ((testrec (hash-table-ref test-records hed))
		 (waitons (or (tests:testqueue-get-waitons testrec) '()))
		 (my-mt-waitons (tests:get-mt-waitons hed #t))
		 (all-waitons   (delete-duplicates (append waitons my-mt-waitons)))
		 (newres  (append res
				  (if (null? all-waitons)
				      (list (conc "   \"" hed "\" [shape=box];"))
				      (map (lambda (waiton)
					     (conc "   \"" waiton "\" -> \"" hed "\" [shape=box];"))
					   all-waitons)))))

	    ;; (debug:print 0 *default-log-port* "For test "hed" got "all-waitons)
	    (if (null? tal)
		(append newres (list "}"))
		(loop (car tal)(cdr tal) newres)
		))))))

;; (tests:run-dot (list "digraph tests {" "a -> b" "}") "plain")

1771
1772
1773
1774
1775
1776
1777

1778
1779
1780
1781
1782
1783
1784
1785
1786
1787
1788
1789
1790
1791
1792
1793
1794






1795
1796
1797
1798
1799
1800
1801
		 (lambda ()
		   (read-lines)))))
      (close-input-port inp)
      res)))

;; read data from tmp file or create if not exists
;; if exists regen in background

;;
(define (tests:lazy-dot testrecords  outtype sizex sizey)
  (let ((dfile (conc "/tmp/." (current-user-name) "-" (server:mk-signature) ".dot"))
	(fname (conc "/tmp/." (current-user-name) "-" (server:mk-signature) ".dotdat")))
    (tests:write-dot-file testrecords dfile sizex sizey)
    (if (common:file-exists? fname)
	(let ((res (with-input-from-file fname
		     (lambda ()
		       (read-lines)))))
	  (system (conc "env -i PATH=$PATH dot -T " outtype " < " dfile " > " fname "&"))
	  res)
	(begin
	  (system (conc "env -i PATH=$PATH dot -T " outtype " < " dfile " > " fname))
	  (with-input-from-file fname
	    (lambda ()
	      (read-lines)))))))
	  







;; for each test:
;;   
(define (tests:filter-non-runnable run-id testkeynames testrecordshash)
  (let ((runnables '()))
    (for-each
     (lambda (testkeyname)







>

|



|
|
|
|
|
|
|
|
|
|
|
|
>
>
>
>
>
>







1792
1793
1794
1795
1796
1797
1798
1799
1800
1801
1802
1803
1804
1805
1806
1807
1808
1809
1810
1811
1812
1813
1814
1815
1816
1817
1818
1819
1820
1821
1822
1823
1824
1825
1826
1827
1828
1829
		 (lambda ()
		   (read-lines)))))
      (close-input-port inp)
      res)))

;; read data from tmp file or create if not exists
;; if exists regen in background
;; mode: raw (return data as read) or munged (convert to list of lists and remove " from strings)
;;
(define (tests:lazy-dot testrecords  outtype sizex sizey mode)
  (let ((dfile (conc "/tmp/." (current-user-name) "-" (server:mk-signature) ".dot"))
	(fname (conc "/tmp/." (current-user-name) "-" (server:mk-signature) ".dotdat")))
    (tests:write-dot-file testrecords dfile sizex sizey)
    (let ((data (if (common:file-exists? fname)
		    (let ((res (with-input-from-file fname
				 (lambda ()
				   (read-lines)))))
		      (system (conc "env -i PATH=$PATH dot -T " outtype " < " dfile " > " fname "&"))
		      res)
		    (begin
		      (system (conc "env -i PATH=$PATH dot -T " outtype " < " dfile " > " fname))
		      (with-input-from-file fname
			(lambda ()
			  (read-lines)))))))
      (if (eq? mode 'raw)
	  data
	  (map (lambda (inl)
		 (map (lambda (s)
			(string-substitute "\"" "" s #t))
		      (string-split inl)))
	       data)))))

;; for each test:
;;   
(define (tests:filter-non-runnable run-id testkeynames testrecordshash)
  (let ((runnables '()))
    (for-each
     (lambda (testkeyname)
1942
1943
1944
1945
1946
1947
1948

1949




















1950


1951
1952
1953
1954
1955
1956
1957
1958
1959
1960
1961
1962
1963

1964
1965
1966
1967
1968
1969
1970
1971
1972
1973
	 (lambda (count)
	   (set! res count))
	 tdb
	 "SELECT count(id) FROM test_rundat;")
	res))
  0)


(define (tests:update-central-meta-info run-id test-id cpuload diskfree minutes uname hostname)




















  (rmt:general-call 'update-test-rundat run-id test-id (current-seconds) (or cpuload -1)(or diskfree -1) -1 (or minutes -1))


  (if (and cpuload diskfree)
      (rmt:general-call 'update-cpuload-diskfree run-id cpuload diskfree test-id))
  (if minutes 
      (rmt:general-call 'update-run-duration run-id minutes test-id))
  (if (and uname hostname)
      (rmt:general-call 'update-uname-host run-id uname hostname test-id)))
  
;; This one is for running with no db access (i.e. via rmt: internally)
(define (tests:set-full-meta-info db test-id run-id minutes work-area remtries)
;; (define (tests:set-full-meta-info test-id run-id minutes work-area)
;;  (let ((remtries 10))
  (let* ((cpuload  (get-cpu-load))
	 (diskfree (get-df (current-directory)))

	 (uname    (get-uname "-srvpio"))
	 (hostname (get-host-name)))
    (tests:update-central-meta-info run-id test-id cpuload diskfree minutes uname hostname)))
    
;; (define (tests:set-partial-meta-info test-id run-id minutes work-area)
#;(define (tests:set-partial-meta-info test-id run-id minutes work-area remtries)
  (let* ((cpuload  (get-cpu-load))
	 (diskfree (get-df (current-directory)))
	 (remtries 10))
    (handle-exceptions







>
|
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
|
>
>
|
|
|
|
|
|


|




>


|







1970
1971
1972
1973
1974
1975
1976
1977
1978
1979
1980
1981
1982
1983
1984
1985
1986
1987
1988
1989
1990
1991
1992
1993
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
	 (lambda (count)
	   (set! res count))
	 tdb
	 "SELECT count(id) FROM test_rundat;")
	res))
  0)

;; 
(define (tests:update-central-meta-info run-id test-id cpuload diskfree minutes uname hostname #!key (update-db #f)(tmpfree #f))
  (if (get-environment-variable "MT_TEST_RUN_DIR")
      (let* ((dest-dir (conc (get-environment-variable "MT_TEST_RUN_DIR") "/.mt_data"))
	     (or-dash  (lambda (instr)
			 (cond
			  ((not instr) "") ;; #f -> blank, indicates value unchanged since last measurement taken
			  ((string? instr)(if (string-search " " instr) (conc "\"" instr "\"") instr))
			  (else instr))))
	     (file-new (not (directory-exists? dest-dir))))
	(if file-new (create-directory dest-dir #t))
	(let* ((outp (open-output-file (conc dest-dir "/test-run.dat") #:append)))
	  (with-output-to-port outp
	    (lambda ()
	      (if file-new
		  (print "epoch_time,run_id,test_id,cpuload,diskfree,tmpfree,run_minutes,hostname,uname"))
	      (print (current-seconds) "," (or-dash run-id)   "," (or-dash test-id)  ","
		     (or-dash cpuload) "," (or-dash diskfree) "," (or-dash tmpfree)  ","
		     (or-dash minutes) "," (or-dash hostname) ","
		     (or-dash uname)))) ;; put uname last as it has spaces in it
	  (close-output-port outp)))
      (begin
	(rmt:general-call 'update-test-rundat run-id test-id (current-seconds) (or cpuload -1)(or diskfree -1) -1 (or minutes -1))))
  (if update-db
      (begin
	(if (and cpuload diskfree)
	    (rmt:general-call 'update-cpuload-diskfree run-id cpuload diskfree test-id))
	(if minutes 
	    (rmt:general-call 'update-run-duration run-id minutes test-id))
	(if (and uname hostname)
	    (rmt:general-call 'update-uname-host run-id uname hostname test-id)))))
  
;; This one is for running with no db access (i.e. via rmt: internally)
(define (tests:set-full-meta-info db test-id run-id minutes work-area remtries #!key (update-db #f))
;; (define (tests:set-full-meta-info test-id run-id minutes work-area)
;;  (let ((remtries 10))
  (let* ((cpuload  (get-cpu-load))
	 (diskfree (get-df (current-directory)))
	 (tmpfree  (get-df "/tmp"))
	 (uname    (get-uname "-srvpio"))
	 (hostname (get-host-name)))
    (tests:update-central-meta-info run-id test-id cpuload diskfree minutes uname hostname update-db: update-db tmpfree: tmpfree)))
    
;; (define (tests:set-partial-meta-info test-id run-id minutes work-area)
#;(define (tests:set-partial-meta-info test-id run-id minutes work-area remtries)
  (let* ((cpuload  (get-cpu-load))
	 (diskfree (get-df (current-directory)))
	 (remtries 10))
    (handle-exceptions