Index: Makefile ================================================================== --- Makefile +++ Makefile @@ -131,10 +131,14 @@ chmod a+x $@ $(PREFIX)/bin/nbfake : utils/nbfake $(INSTALL) $< $@ chmod a+x $@ + +$(PREFIX)/bin/remrun : utils/remrun + $(INSTALL) $< $@ + chmod a+x $@ $(PREFIX)/bin/viewscreen : utils/viewscreen $(INSTALL) $< $@ chmod a+x $@ @@ -169,11 +173,11 @@ $(INSTALL) dboard $(PREFIX)/bin/.$(ARCHSTR)/dboard install : $(PREFIX)/bin/.$(ARCHSTR) $(PREFIX)/bin/.$(ARCHSTR)/mtest $(PREFIX)/bin/megatest \ $(PREFIX)/bin/.$(ARCHSTR)/dboard $(PREFIX)/bin/dashboard $(HELPERS) $(PREFIX)/bin/nbfake \ $(PREFIX)/bin/nbfind $(PREFIX)/bin/loadrunner $(PREFIX)/bin/viewscreen $(PREFIX)/bin/mt_xterm \ - $(PREFIX)/share/docs/megatest_manual.html + $(PREFIX)/share/docs/megatest_manual.html $(PREFIX)/bin/remrun $(PREFIX)/bin/.$(ARCHSTR) : mkdir -p $(PREFIX)/bin/.$(ARCHSTR) test: tests/tests.scm @@ -211,11 +215,11 @@ # chicken-install -prefix deploytarg -deploy $$i;done # deploytarg/libsqlite3.so : # CSC_OPTIONS="-Ideploytarg -Ldeploytarg" $CHICKEN_INSTALL -prefix deploytarg -deploy sqlite3 -deploy : deploytarg/mtest deploytarg/dboard $(DEPLOYHELPERS) deploytarg/nbfake deploytarg/viewsceen deploytarg/nbfind deploytarg/apropos.so +deploy : deploytarg/mtest deploytarg/dboard $(DEPLOYHELPERS) deploytarg/nbfake deploytarg/remrun deploytarg/viewsceen deploytarg/nbfind deploytarg/apropos.so # deploytarg/libiupcd.so : $(CKPATH)/lib/libiupcd.so # for i in iup im cd av call sqlite; do \ # cp $(CKPATH)/lib/lib$$i* deploytarg/ ; \ # done Index: NOTES ================================================================== --- NOTES +++ NOTES @@ -1,13 +1,19 @@ +===================================================================== +NOTES from looking at branch v1.62-rpc +===================================================================== + +*last-db-access* or *db-last-access* ==> which is it to be? +seen in singletest: ERROR: Unrecognised arguments: :first_err This is the first error ====================================================================== New way of launching needed to accomodate different target hosttypes for items ====================================================================== [flavors] -general ssh #{getbgesthost general} +general ssh #{getbesthost general} nbgeneral nbjob run JOBCOMMAND -log $MT_LINKTREE/$MT_TARGET/$MT_RUNNAME.$MT_TESTNAME-$MT_ITEM_PATH.lgo [hosts] general cubian xena Index: common.scm ================================================================== --- common.scm +++ common.scm @@ -131,28 +131,37 @@ (define *toptest-paths* (make-hash-table)) ;; cache toptest path settings here (define *test-paths* (make-hash-table)) ;; cache test-id to test run paths here (define *test-ids* (make-hash-table)) ;; cache run-id, testname, and item-path => test-id (define *test-info* (make-hash-table)) ;; cache the test info records, update the state, status, run_duration etc. from testdat.db -(define *run-info-cache* (make-hash-table)) ;; run info is stable, no need to reget +(define *run-info-cache* (make-hash-table)) ;; run info is stable, no need to reget (define *launch-setup-mutex* (make-mutex)) ;; need to be able to call launch:setup often so mutex it and re-call the real deal only if *toppath* not set (define *homehost-mutex* (make-mutex)) +;; launching and hosts +(defstruct host + (reachable #f) + (last-update 0) + (last-used 0) + (last-cpuload 1)) + +(define *host-loads* (make-hash-table)) + ;; cache environment vars for each run here (define *env-vars-by-run-id* (make-hash-table)) ;; Testconfig and runconfig caches. -(define *testconfigs* (make-hash-table)) ;; test-name => testconfig -(define *runconfigs* (make-hash-table)) ;; target => runconfig +(define *testconfigs* (make-hash-table)) ;; test-name => testconfig +(define *runconfigs* (make-hash-table)) ;; target => runconfig ;; This is a cache of pre-reqs met, don't re-calc in cases where called with same params less than ;; five seconds ago (define *pre-reqs-met-cache* (make-hash-table)) ;; cache of verbosity given string ;; -(define *verbosity-cache* (make-hash-table)) +(define *verbosity-cache* (make-hash-table)) (define (common:clear-caches) (set! *target* (make-hash-table)) (set! *keys* (make-hash-table)) (set! *keyvals* (make-hash-table)) @@ -1073,10 +1082,112 @@ (with-input-from-pipe (conc "ssh " remote-host " cat /proc/loadavg") (lambda ()(list (read)(read)(read))))) (with-input-from-file "/proc/loadavg" (lambda ()(list (read)(read)(read)))))) + +;; get normalized cpu load by reading from /proc/loadavg and /proc/cpuinfo return all three values and the number of real cpus and the number of threads +;; returns list (normalized-proc-load normalized-core-load 1m 5m 15m ncores nthreads) +;; +(define (common:get-normalized-cpu-load remote-host) + (let ((data (if remote-host + (with-input-from-pipe + (conc "ssh " remote-host " cat /proc/loadavg;cat /proc/cpuinfo;echo end") + read-lines) + (append + (with-input-from-file "/proc/loadavg" + read-lines) + (with-input-from-file "/proc/cpuinfo" + read-lines) + (list "end")))) + (load-rx (regexp "^([\\d\\.]+)\\s+([\\d\\.]+)\\s+([\\d\\.]+)\\s+.*$")) + (proc-rx (regexp "^processor\\s+:\\s+(\\d+)\\s*$")) + (core-rx (regexp "^core id\\s+:\\s+(\\d+)\\s*$")) + (phys-rx (regexp "^physical id\\s+:\\s+(\\d+)\\s*$")) + (max-num (lambda (p n)(max (string->number p) n)))) + ;; (print "data=" data) + (if (null? data) ;; something went wrong + #f + (let loop ((hed (car data)) + (tal (cdr data)) + (loads #f) + (proc-num 0) ;; processor includes threads + (phys-num 0) ;; physical chip on motherboard + (core-num 0)) ;; core + ;; (print hed ", " loads ", " proc-num ", " phys-num ", " core-num) + (if (null? tal) ;; have all our data, calculate normalized load and return result + (let* ((act-proc (+ proc-num 1)) + (act-phys (+ phys-num 1)) + (act-core (+ core-num 1)) + (adj-proc-load (/ (car loads) act-proc)) + (adj-core-load (/ (car loads) act-core))) + (append (list (cons 'adj-proc-load adj-proc-load) + (cons 'adj-core-load adj-core-load)) + (list (cons '1m-load (car loads)) + (cons '5m-load (cadr loads)) + (cons '15m-load (caddr loads))) + (list (cons 'proc act-proc) + (cons 'core act-core) + (cons 'phys act-phys)))) + (regex-case + hed + (load-rx ( x l1 l5 l15 ) (loop (car tal)(cdr tal)(map string->number (list l1 l5 l15)) proc-num phys-num core-num)) + (proc-rx ( x p ) (loop (car tal)(cdr tal) loads (max-num p proc-num) phys-num core-num)) + (phys-rx ( x p ) (loop (car tal)(cdr tal) loads proc-num (max-num p phys-num) core-num)) + (core-rx ( x c ) (loop (car tal)(cdr tal) loads proc-num phys-num (max-num c core-num))) + (else + (begin + ;; (print "NO MATCH: " hed) + (loop (car tal)(cdr tal) loads proc-num phys-num core-num))))))))) + +(define (common:unix-ping hostname) + (let ((res (system (conc "ping -c 1 " hostname " > /dev/null")))) + (eq? res 0))) + +;; ideally put all this info into the db, no need to preserve it across moving homehost +;; +(define (common:get-least-loaded-host hosts-raw) + (let* ((hosts (filter (lambda (x) + (string-match (regexp "^\\S+$") x)) + hosts-raw))) + (if (null? hosts) + #f + ;; + ;; stategy: + ;; sort by last-used and normalized-load + ;; if last-updated > 15 seconds then re-update + ;; take the host with the lowest load with the lowest last-used (i.e. not used for longest time) + ;; + (let ((best-host #f) + (curr-time (current-seconds))) + (for-each + (lambda (hostname) + (let* ((rec (let ((h (hash-table-ref/default *host-loads* hostname #f))) + (if h + h + (let ((h (make-host))) + (hash-table-set! *host-loads* hostname h) + h)))) + ;; if host hasn't been pinged in 15 sec update it's data + (ping-good (if (< (- curr-time (host-last-update rec)) 15) + (host-reachable rec) + (or (host-reachable rec) + (begin + (host-reachable-set! rec (common:unix-ping hostname)) + (host-last-update-set! rec curr-time) + (host-last-cpuload-set! rec (common:get-normalized-cpu-load hostname)) + (host-reachable rec)))))) + (cond + ((not best-host) + (set! best-host hostname)) + ((and ping-good + (< (alist-ref 'adj-core-load (host-last-cpuload rec)) + (alist-ref 'adj-core-load + (host-last-cpuload (hash-table-ref *host-loads* best-host))))) + (set! best-host hostname))))) + hosts) + best-host)))) (define (common:wait-for-cpuload maxload numcpus waitdelay #!key (count 1000) (msg #f)(remote-host #f)) (let* ((loadavg (common:get-cpu-load remote-host)) (first (car loadavg)) (next (cadr loadavg)) @@ -1575,28 +1686,30 @@ ;;====================================================================== ;; T E S T L A U N C H I N G P E R I T E M W I T H H O S T T Y P E S ;;====================================================================== ;; -;; [host-types] -;; general ssh #{getbgesthost general} -;; nbgeneral nbjob run JOBCOMMAND -log $MT_LINKTREE/$MT_TARGET/$MT_RUNNAME.$MT_TESTNAME-$MT_ITEM_PATH.lgo +;; [hosts] +;; arm cubie01 cubie02 +;; x86_64 zeus xena myth01 +;; allhosts #{g hosts arm} #{g hosts x86_64} ;; -;; [hosts] -;; general cubian xena +;; [host-types] +;; general #MTLOWESTLOAD #{g hosts allhosts} +;; arm #MTLOWESTLOAD #{g hosts arm} +;; nbgeneral nbjob run JOBCOMMAND -log $MT_LINKTREE/$MT_TARGET/$MT_RUNNAME.$MT_TESTNAME-$MT_ITEM_PATH.lgo ;; ;; [launchers] ;; envsetup general ;; xor/%/n 4C16G ;; % nbgeneral ;; ;; [jobtools] -;; launcher bsub -;; # if defined and not "no" flexi-launcher will bypass launcher unless there is no -;; # match. +;; # if defined and not "no" flexi-launcher will bypass "launcher" unless no match. ;; flexi-launcher yes - +;; launcher nbfake +;; (define (common:get-launcher configdat testname itempath) (let ((fallback-launcher (configf:lookup configdat "jobtools" "launcher"))) (if (and (configf:lookup configdat "jobtools" "flexi-launcher") ;; overrides launcher (not (equal? (configf:lookup configdat "jobtools" "flexi-launcher") "no"))) (let* ((launchers (hash-table-ref/default configdat "launchers" '()))) @@ -1609,11 +1722,16 @@ (if (tests:match patt testname itempath) (begin (debug:print-info 2 *default-log-port* "Have flexi-launcher match for " testname "/" itempath " = " host-type) (let ((launcher (configf:lookup configdat "host-types" host-type))) (if launcher - launcher + (let* ((launcher-parts (string-split launcher)) + (launcher-exe (car launcher-parts))) + (if (equal? launcher-exe "#MTLOWESTLOAD") ;; this is our special case, we will find the lowest load and craft a nbfake commandline + (let ((targ-host (common:get-least-loaded-host (cdr launcher-parts)))) + (conc "remrun " targ-host)) + launcher)) (begin (debug:print-info 0 *default-log-port* "WARNING: no launcher found for host-type " host-type) (if (null? tal) fallback-launcher (loop (car tal)(cdr tal))))))) Index: configf.scm ================================================================== --- configf.scm +++ configf.scm @@ -57,10 +57,11 @@ ;;====================================================================== ;; Make the regexp's needed globally available ;;====================================================================== (define configf:include-rx (regexp "^\\[include\\s+(.*)\\]\\s*$")) +(define configf:script-rx (regexp "^\\[scriptinc\\s+(.*)\\]\\s*$")) ;; include output from a script (define configf:section-rx (regexp "^\\[(.*)\\]\\s*$")) (define configf:blank-l-rx (regexp "^\\s*$")) (define configf:key-sys-pr (regexp "^(\\S+)\\s+\\[system\\s+(\\S+.*)\\]\\s*$")) (define configf:key-val-pr (regexp "^(\\S+)(\\s+(.*)|())$")) (define configf:key-no-val (regexp "^(\\S+)(\\s*)$")) @@ -68,11 +69,11 @@ (define configf:cont-ln-rx (regexp "^(\\s+)(\\S+.*)$")) (define configf:settings (regexp "^\\[configf:settings\\s+(\\S+)\\s+(\\S+)]\\s*$")) ;; read a line and process any #{ ... } constructs -(define configf:var-expand-regex (regexp "^(.*)#\\{(scheme|system|shell|getenv|get|runconfigs-get|rget)\\s+([^\\}\\{]*)\\}(.*)")) +(define configf:var-expand-regex (regexp "^(.*)#\\{(scheme|system|shell|getenv|get|runconfigs-get|rget|scm|sh|rp|gv|g|mtrah)\\s+([^\\}\\{]*)\\}(.*)")) (define (configf:process-line l ht allow-system #!key (linenum #f)) (let loop ((res l)) (if (string? res) (let ((matchdat (string-search configf:var-expand-regex res))) @@ -83,36 +84,42 @@ (poststr (list-ref matchdat 4)) (result #f) (start-time (current-seconds)) (cmdsym (string->symbol cmdtype)) (fullcmd (case cmdsym - ((scheme)(conc "(lambda (ht)" cmd ")")) - ((system)(conc "(lambda (ht)(system \"" cmd "\"))")) - ((shell) (conc "(lambda (ht)(shell \"" cmd "\"))")) - ((getenv)(conc "(lambda (ht)(get-environment-variable \"" cmd "\"))")) - ((get) + ((scheme scm) (conc "(lambda (ht)" cmd ")")) + ((system) (conc "(lambda (ht)(system \"" cmd "\"))")) + ((shell sh) (conc "(lambda (ht)(string-translate (shell \"" cmd "\") \"\n\" \" \"))")) + ((realpath rp)(conc "(lambda (ht)(common:nice-path \"" cmd "\"))")) + ((getenv gv) (conc "(lambda (ht)(get-environment-variable \"" cmd "\"))")) + ((mtrah) (conc "(lambda (ht)" + " (let ((extra \"" cmd "\"))" + " (conc (or *toppath* (get-environment-variable \"MT_RUN_AREA_HOME\"))" + " (if (string-null? extra) \"\" \"/\")" + " extra)))")) + ((get g) (let* ((parts (string-split cmd)) (sect (car parts)) (var (cadr parts))) (conc "(lambda (ht)(config-lookup ht \"" sect "\" \"" var "\"))"))) - ((runconfigs-get) (conc "(lambda (ht)(runconfigs-get ht \"" cmd "\"))")) - ((rget) (conc "(lambda (ht)(runconfigs-get ht \"" cmd "\"))")) + ((runconfigs-get rget) (conc "(lambda (ht)(runconfigs-get ht \"" cmd "\"))")) + ;; ((rget) (conc "(lambda (ht)(runconfigs-get ht \"" cmd "\"))")) (else "(lambda (ht)(print \"ERROR\") \"ERROR\")")))) ;; (print "fullcmd=" fullcmd) (handle-exceptions exn (begin (debug:print 0 *default-log-port* "WARNING: failed to process config input \"" l "\"") (debug:print 0 *default-log-port* " message: " ((condition-property-accessor 'exn 'message) exn)) ;; (print "exn=" (condition->list exn)) - (set! result (conc "#{( " cmdtype ") " cmd"}"))) + (set! result (conc "#{( " cmdtype ") " cmd "}, full expansion: " fullcmd))) (if (or allow-system - (not (member cmdtype '("system" "shell")))) + (not (member cmdtype '("system" "shell" "sh")))) (with-input-from-string fullcmd (lambda () (set! result ((eval (read)) ht)))) - (set! result (conc "#{(" cmdtype ") " cmd "}")))) + (set! result (conc "#{(" cmdtype ") " cmd "}")))) (case cmdsym ((system shell scheme) (let ((delta (- (current-seconds) start-time))) (if (> delta 2) (debug:print-info 0 *default-log-port* "for line \"" l "\"\n command: " cmd " took " delta " seconds to run with output:\n " result) @@ -182,16 +189,19 @@ ;; post-section-procs alist of section-pattern => proc, where: (proc section-name next-section-name ht curr-path) ;; (define (read-config path ht allow-system #!key (environ-patt #f)(curr-section #f)(sections #f)(settings (make-hash-table))(keep-filenames #f)(post-section-procs '())) (debug:print-info 5 *default-log-port* "read-config " path " allow-system " allow-system " environ-patt " environ-patt " curr-section: " curr-section " sections: " sections " pwd: " (current-directory)) (debug:print 9 *default-log-port* "START: " path) - (if (not (file-exists? path)) + (if (and (not (port? path)) + (not (file-exists? path))) ;; for case where we are handed a port (begin (debug:print-info 1 *default-log-port* "read-config - file not found " path " current path: " (current-directory)) ;; WARNING: This is a risky change but really, we should not return an empty hash table if no file read? #f) ;; (if (not ht)(make-hash-table) ht)) - (let ((inp (open-input-file path)) + (let ((inp (if (string? path) + (open-input-file path) + path)) ;; we can be handed a port (res (if (not ht)(make-hash-table) ht)) (metapath (if (or (debug:debug-mode 9) keep-filenames) path #f))) (let loop ((inl (configf:read-line inp res (calc-allow-system allow-system curr-section sections) settings)) ;; (read-line inp)) @@ -199,11 +209,12 @@ (var-flag #f);; turn on for key-var-pr and cont-ln-rx, turn off elsewhere (lead #f)) (debug:print-info 8 *default-log-port* "curr-section-name: " curr-section-name " var-flag: " var-flag "\n inl: \"" inl "\"") (if (eof-object? inl) (begin - (close-input-port inp) + (if (string? path) ;; we received a path, not a port, thus we are responsible for closing it. + (close-input-port inp)) (hash-table-delete! res "") ;; we are using "" as a dumping ground and must remove it before returning the ht (debug:print 9 *default-log-port* "END: " path) res) (regex-case inl @@ -229,10 +240,26 @@ (loop (configf:read-line inp res (calc-allow-system allow-system curr-section-name sections) settings) curr-section-name #f #f)) (begin (debug:print '(2 9) #f "INFO: include file " include-file " not found (called from " path ")") (debug:print 2 *default-log-port* " " full-conf) (loop (configf:read-line inp res (calc-allow-system allow-system curr-section-name sections) settings) curr-section-name #f #f))))) + (configf:script-rx ( x include-script );; handle-exceptions + ;; exn + ;; (begin + ;; (debug:print '(0 2 9) #f "INFO: include from script " include-script " failed.") + ;; (loop (configf:read-line inp res (calc-allow-system allow-system curr-section-name sections) settings) curr-section-name #f #f)) + (if (and (file-exists? include-script)(file-execute-access? include-script)) + (let* ((new-inp-port (open-input-pipe include-script))) + (debug:print '(2 9) *default-log-port* "Including from script output: " include-script) + ;; (print "We got here, calling read-config next. Port is: " new-inp-port) + (read-config new-inp-port res allow-system environ-patt: environ-patt curr-section: curr-section-name sections: sections settings: settings keep-filenames: keep-filenames) + (close-input-port new-inp-port) + (loop (configf:read-line inp res (calc-allow-system allow-system curr-section-name sections) settings) curr-section-name #f #f)) + (begin + (debug:print 0 *default-log-port* "Script not found or not exectutable: " include-script) + (loop (configf:read-line inp res (calc-allow-system allow-system curr-section-name sections) settings) curr-section-name #f #f))) + ) ;; ) (configf:section-rx ( x section-name ) (begin ;; call post-section-procs (for-each (lambda (dat) (let ((patt (car dat)) Index: db.scm ================================================================== --- db.scm +++ db.scm @@ -193,11 +193,11 @@ ;; (or (configf:lookup *configdat* "setup" "dbdir") ;; (conc (configf:lookup *configdat* "setup" "linktree") "/.db"))) (define (db:set-sync db) (let ((syncprag (configf:lookup *configdat* "setup" "sychronous"))) - (sqlite3:execute db (conc "PRAGMA synchronous = " (or syncprag 1) ";")))) + (sqlite3:execute db (conc "PRAGMA synchronous = " (or syncprag 0) ";")))) ;; open an sql database inside a file lock ;; returns: db existed-prior-to-opening ;; RA => Returns a db handler; sets the lock if opened in writable mode ;; @@ -211,11 +211,11 @@ (if file-write ;; dir-writable (let (;; (lock (obtain-dot-lock fname 1 5 10)) (db (sqlite3:open-database fname))) (sqlite3:set-busy-handler! db (make-busy-timeout 136000)) ;; (db:set-sync db) - (sqlite3:execute db "PRAGMA synchronous = NORMAL;") + (sqlite3:execute db "PRAGMA synchronous = 0;") (if (not file-exists) (begin (if (string-match "^/tmp/.*" fname) ;; this is a file in /tmp (sqlite3:execute db "PRAGMA journal_mode=WAL;") (print "Creating " fname " in NON-WAL mode.")) @@ -739,11 +739,11 @@ ;; Add db direct ;; (define (db:dispatch-query access-mode rmt-cmd db-cmd . params) (if (eq? access-mode 'cached) - (print "not doing cached calls right now")) + (debug:print 2 *default-log-port* "not doing cached calls right now")) ;; (apply db:call-with-cached-db db-cmd params) (apply rmt-cmd params)) ;;) ;; return the target db handle so it can be used @@ -1497,25 +1497,33 @@ (min-incompleted-ids (map car incompleted)) ;; do 'em all (all-ids (append min-incompleted-ids (map car oldlaunched)))) (if (> (length all-ids) 0) (begin (debug:print 0 *default-log-port* "WARNING: Marking test(s); " (string-intersperse (map conc all-ids) ", ") " as INCOMPLETE") - (sqlite3:execute - db - (conc "UPDATE tests SET state='INCOMPLETE' WHERE id IN (" - (string-intersperse (map conc all-ids) ",") - ");"))))) - - ;; Now do rollups for the toplevel tests - ;; - ;; (db:delay-if-busy dbdat) - (for-each - (lambda (toptest) - (let ((test-name (list-ref toptest 3))) -;; (run-id (list-ref toptest 5))) - (db:top-test-set-per-pf-counts dbstruct run-id test-name))) - toplevels))) + (for-each + (lambda (test-id) + (db:test-set-status-state dbstruct run-id test-id "COMPLETE" "DEAD" "Test failed to complete")) + all-ids)))))) + +;; ALL REPLACED BY THE BLOCK ABOVE +;; +;; (sqlite3:execute +;; db +;; (conc "UPDATE tests SET state='INCOMPLETE' WHERE run_id=? AND id IN (" +;; (string-intersperse (map conc all-ids) ",") +;; ");") +;; run-id)))) +;; +;; ;; Now do rollups for the toplevel tests +;; ;; +;; ;; (db:delay-if-busy dbdat) +;; (for-each +;; (lambda (toptest) +;; (let ((test-name (list-ref toptest 3))) +;; ;; (run-id (list-ref toptest 5))) +;; (db:top-test-set-per-pf-counts dbstruct run-id test-name))) +;; toplevels))) ;; BUG: Probably broken - does not explicitly use run-id in the query ;; (define (db:top-test-set-per-pf-counts dbstruct run-id test-name) (db:general-call (db:get-db dbstruct run-id) 'top-test-set-per-pf-counts (list test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name))) @@ -3054,23 +3062,26 @@ (set! row-ids (cons rid row-ids))) runsqry) (sqlite3:finalize! runsqry) row-ids)) +;; finds latest matching all patts for given run-id +;; (define (db:test-get-paths-matching-keynames-target-new dbstruct run-id keynames target res testpatt statepatt statuspatt runname) (let* ((testqry (tests:match->sqlqry testpatt)) - (tstsqry (conc "SELECT rundir FROM tests WHERE " testqry " AND state LIKE '" statepatt "' AND status LIKE '" statuspatt "' ORDER BY event_time ASC;"))) + (tstsqry (conc "SELECT rundir FROM tests WHERE run_id=? AND " testqry " AND state LIKE '" statepatt "' AND status LIKE '" statuspatt "' ORDER BY event_time ASC;"))) (db:with-db dbstruct run-id #f (lambda (db) (sqlite3:for-each-row (lambda (p) (set! res (cons p res))) db - tstsqry) + tstsqry + run-id) res)))) (define (db:test-toplevel-num-items dbstruct run-id testname) (db:with-db dbstruct @@ -3310,10 +3321,11 @@ '(delete-tests-in-state ;; "DELETE FROM tests WHERE state=?;") ;; DONE "UPDATE tests SET state='DELETED' WHERE state=?") '(tests:test-set-toplog "UPDATE tests SET final_logf=? WHERE run_id=? AND testname=? AND item_path='';") '(update-cpuload-diskfree "UPDATE tests SET cpuload=?,diskfree=? WHERE id=?;") ;; DONE '(update-uname-host "UPDATE tests SET uname=?,host=? WHERE id=?;") ;; DONE + '(update-test-rundat "INSERT INTO test_rundat (test_id,update_time,cpuload,diskfree,diskusage,run_duration) VALUES (?,?,?,?,?,?);") '(update-test-state "UPDATE tests SET state=? WHERE state=? AND run_id=? AND testname=? AND NOT (item_path='' AND testname IN (SELECT DISTINCT testname FROM tests WHERE testname=? AND item_path != ''));") '(update-test-status "UPDATE tests SET status=? WHERE status like ? AND run_id=? AND testname=? AND NOT (item_path='' AND testname IN (SELECT DISTINCT testname FROM tests WHERE testname=? AND item_path != ''));") ;; stuff for roll-up-pass-fail-counts '(update-pass-fail-counts "UPDATE tests SET fail_count=(SELECT count(id) FROM tests WHERE testname=? AND item_path != '' AND status IN ('FAIL','CHECK','INCOMPLETE','ABORT')), Index: docs/manual/megatest_manual.html ================================================================== --- docs/manual/megatest_manual.html +++ docs/manual/megatest_manual.html @@ -1325,11 +1325,105 @@

Reference

-

Megatest Config File Settings

+

Config File Helpers

+

Various helpers for more advanced config files.

+ + +++++ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
Table 2. Helpers
Helper Purpose Valid values Comments

#{scheme (scheme code…)}

Execute arbitrary scheme code

Any valid scheme

Value returned from the call is converted to a string and processed as part of the config file

#{system command}

Execute program, inserts exit code

Any valid Unix command

Discards the output from the program

#{shell command} or #{sh …}

Execute program, inserts result from stdout

Any valid Unix command

Value returned from the call is converted to a string and processed as part of the config file

#{realpath path} or #{rp …}

Replace with normalized path

Must be a valid path

#{getenv VAR} or #{gv VAR}

Replace with content of env variable

Must be a valid var

#{get s v} or #{g s v}

Replace with variable v from section s

Variable must be defined before use

#{rget v}

Replace with variable v from target or default of runconfigs file

Replace with the path to the megatest testsuite area

+
+
+

Config File Settings

+

Settings in megatest.config

+
+
+

Config File Additional Features

+

Including output from a script as if it was inline to the config file:

+
+
+
[scriptinc myscript.sh]
+
+

If the script outputs:

+
+
+
[items]
+A a b c
+B d e f
+
+

Then the config file would effectively appear to contain an items section +exactly like the output from the script. This is extremely useful when +dynamically creating items, itemstables and other config structures. You can +see the expansion of the call by looking in the cached files (look in your +linktree for megatest.config and runconfigs.config cache files and in your +test run areas for the expanded and cached testconfig).

Disk Space Checks

Some parameters you can put in the [setup] section of megatest.config:

@@ -1448,11 +1542,11 @@

Database settings

- + @@ -1917,11 +2011,11 @@

These routines can be called from the megatest repl.

Table 2. Database config settings in [setup] section of megatest.configTable 3. Database config settings in [setup] section of megatest.config
- + @@ -1969,10 +2063,10 @@
Index: docs/manual/reference.txt ================================================================== --- docs/manual/reference.txt +++ docs/manual/reference.txt @@ -1,11 +1,56 @@ Reference --------- -Megatest Config File Settings -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Config File Helpers +~~~~~~~~~~~~~~~~~~~ + +Various helpers for more advanced config files. + +.Helpers +[width="80%",cols="^,2m,2m,2m",frame="topbot",options="header"] +|====================== +|Helper | Purpose | Valid values | Comments +| #{scheme (scheme code...)} | Execute arbitrary scheme code | Any valid scheme | Value returned from the call is converted to a string and processed as part of the config file +| #{system command} | Execute program, inserts exit code | Any valid Unix command | Discards the output from the program +| #{shell command} or #{sh ...} | Execute program, inserts result from stdout | Any valid Unix command | Value returned from the call is converted to a string and processed as part of the config file +| #{realpath path} or #{rp ...} | Replace with normalized path | Must be a valid path | +| #{getenv VAR} or #{gv VAR} | Replace with content of env variable | Must be a valid var | +| #{get s v} or #{g s v} | Replace with variable v from section s | Variable must be defined before use | +| #{rget v} | Replace with variable v from target or default of runconfigs file | | +| #{mtrah} | Replace with the path to the megatest testsuite area | | +|====================== + +Config File Settings +~~~~~~~~~~~~~~~~~~~~ + +Settings in megatest.config + +Config File Additional Features +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Including output from a script as if it was inline to the config file: + +------------------------- +[scriptinc myscript.sh] +------------------------- + +If the script outputs: + +------------------------- +[items] +A a b c +B d e f +------------------------- + +Then the config file would effectively appear to contain an items section +exactly like the output from the script. This is extremely useful when +dynamically creating items, itemstables and other config structures. You can +see the expansion of the call by looking in the cached files (look in your +linktree for megatest.config and runconfigs.config cache files and in your +test run areas for the expanded and cached testconfig). Disk Space Checks ^^^^^^^^^^^^^^^^^ Some parameters you can put in the [setup] section of megatest.config: Index: launch.scm ================================================================== --- launch.scm +++ launch.scm @@ -861,11 +861,11 @@ (if res (cdr res) (begin (if (common:low-noise-print 20 "No valid disks or no disk with enough space") (debug:print-error 0 *default-log-port* "No valid disks found in megatest.config. Please add some to your [disks] section and ensure the directory exists and has enough space!\n You can change minspace in the [setup] section of megatest.config. Current setting is: " minspace)) - (exit 1))))))) + (exit 1))))))) ;; TODO - move the exit to the calling location and return #f ;; Desired directory structure: ;; ;; - - -. ;; | @@ -1053,198 +1053,201 @@ ;; 4. remotely run the test on allocated host ;; - could be ssh to host from hosts table (update regularly with load) ;; - could be netbatch ;; (launch-test db (cadr status) test-conf)) (define (launch-test test-id run-id run-info keyvals runname test-conf test-name test-path itemdat params) - (let loop ((delta (- (current-seconds) *last-launch*)) - (launch-delay (string->number (or (configf:lookup *configdat* "setup" "launch-delay") "5")))) - (if (> launch-delay delta) - (begin - (debug:print-info 0 *default-log-port* "Delaying launch of " test-name " for " (- launch-delay delta) " seconds") - (thread-sleep! (- launch-delay delta)) - (loop (- (current-seconds) *last-launch*) launch-delay)))) - (set! *last-launch* (current-seconds)) - (change-directory *toppath*) - (alist->env-vars ;; consolidate this code with the code in megatest.scm for "-execute" - (list ;; (list "MT_TEST_RUN_DIR" work-area) - (list "MT_RUN_AREA_HOME" *toppath*) - (list "MT_TEST_NAME" test-name) - ;; (list "MT_ITEM_INFO" (conc itemdat)) - (list "MT_RUNNAME" runname) - ;; (list "MT_TARGET" mt_target) - )) - (let* ((tregistry (tests:get-all)) - (item-path (let ((ip (item-list->path itemdat))) - (alist->env-vars (list (list "MT_ITEMPATH" ip))) - ip)) - (tconfig (or (tests:get-testconfig test-name tregistry #t force-create: #t) - test-conf)) ;; force re-read now that all vars are set - (useshell (let ((ush (config-lookup *configdat* "jobtools" "useshell"))) - (if ush - (if (equal? ush "no") ;; must use "no" to NOT use shell - #f - ush) - #t))) ;; default is yes - (runscript (config-lookup tconfig "setup" "runscript")) - (ezsteps (> (length (hash-table-ref/default tconfig "ezsteps" '())) 0)) ;; don't send all the steps, could be big - (diskspace (config-lookup tconfig "requirements" "diskspace")) - (memory (config-lookup tconfig "requirements" "memory")) - (hosts (config-lookup *configdat* "jobtools" "workhosts")) - (remote-megatest (config-lookup *configdat* "setup" "executable")) - (run-time-limit (or (configf:lookup tconfig "requirements" "runtimelim") - (configf:lookup *configdat* "setup" "runtimelim"))) - ;; FIXME SOMEDAY: not good how this is so obtuse, this hack is to - ;; allow running from dashboard. Extract the path - ;; from the called megatest and convert dashboard - ;; or dboard to megatest - (local-megatest (let* ((lm (car (argv))) - (dir (pathname-directory lm)) - (exe (pathname-strip-directory lm))) - (conc (if dir (conc dir "/") "") - (case (string->symbol exe) - ((dboard) "../megatest") - ((mtest) "../megatest") - ((dashboard) "megatest") - (else exe))))) - (launcher (common:get-launcher *configdat* test-name item-path)) ;; (config-lookup *configdat* "jobtools" "launcher")) - (test-sig (conc (common:get-testsuite-name) ":" test-name ":" item-path)) ;; (item-list->path itemdat))) ;; test-path is the full path including the item-path - (work-area #f) - (toptest-work-area #f) ;; for iterated tests the top test contains data relevant for all - (diskpath #f) - (cmdparms #f) - (fullcmd #f) ;; (define a (with-output-to-string (lambda ()(write x)))) - (mt-bindir-path #f) - (testinfo (rmt:get-test-info-by-id run-id test-id)) - (mt_target (string-intersperse (map cadr keyvals) "/")) - (debug-param (append (if (args:get-arg "-debug") (list "-debug" (args:get-arg "-debug")) '()) - (if (args:get-arg "-logging")(list "-logging") '())))) - - (setenv "MT_ITEMPATH" item-path) - (if hosts (set! hosts (string-split hosts))) - ;; set the megatest to be called on the remote host - (if (not remote-megatest)(set! remote-megatest local-megatest)) ;; "megatest")) - (set! mt-bindir-path (pathname-directory remote-megatest)) - (if launcher (set! launcher (string-split launcher))) - ;; set up the run work area for this test - (if (and (args:get-arg "-preclean") ;; user has requested to preclean for this run - (not (member (db:test-get-rundir testinfo)(list "n/a" "/tmp/badname")))) ;; n/a is a placeholder and thus not a read dir - (begin - (debug:print-info 0 *default-log-port* "attempting to preclean directory " (db:test-get-rundir testinfo) " for test " test-name "/" item-path) - (runs:remove-test-directory testinfo 'remove-data-only))) ;; remove data only, do not perturb the record - - ;; prevent overlapping actions - set to LAUNCHED as early as possible - ;; - ;; the following call handles waiver propogation. cannot yet condense into roll-up-pass-fail - (tests:test-set-status! run-id test-id "LAUNCHED" "n/a" #f #f) ;; (if launch-results launch-results "FAILED")) - (rmt:roll-up-pass-fail-counts run-id test-name item-path #f "LAUNCHED" #f) - (set! diskpath (get-best-disk *configdat* tconfig)) - (if diskpath - (let ((dat (create-work-area run-id run-info keyvals test-id test-path diskpath test-name itemdat))) - (set! work-area (car dat)) - (set! toptest-work-area (cadr dat)) - (debug:print-info 2 *default-log-port* "Using work area " work-area)) - (begin - (set! work-area (conc test-path "/tmp_run")) - (create-directory work-area #t) - (debug:print 0 *default-log-port* "WARNING: No disk work area specified - running in the test directory under tmp_run"))) - (set! cmdparms (base64:base64-encode - (z3:encode-buffer - (with-output-to-string - (lambda () ;; (list 'hosts hosts) - (write (list (list 'testpath test-path) - (list 'transport (conc *transport-type*)) - ;; (list 'serverinf *server-info*) - (list 'toppath *toppath*) - (list 'work-area work-area) - (list 'test-name test-name) - (list 'runscript runscript) - (list 'run-id run-id ) - (list 'test-id test-id ) - ;; (list 'item-path item-path ) - (list 'itemdat itemdat ) - (list 'megatest remote-megatest) - (list 'ezsteps ezsteps) - (list 'target mt_target) - (list 'runtlim (if run-time-limit (common:hms-string->seconds run-time-limit) #f)) - (list 'env-ovrd (hash-table-ref/default *configdat* "env-override" '())) - (list 'set-vars (if params (hash-table-ref/default params "-setvars" #f))) - (list 'runname runname) - (list 'mt-bindir-path mt-bindir-path)))))))) - - ;; clean out step records from previous run if they exist - ;; (rmt:delete-test-step-records run-id test-id) - ;; if the dir does not exist we may have a itempath where individual variables are a path, launch anyway - (if (file-exists? work-area) - (change-directory work-area)) ;; so that log files from the launch process don't clutter the test dir - (cond - ((and launcher hosts) ;; must be using ssh hostname - (set! fullcmd (append launcher (car hosts)(list remote-megatest "-m" test-sig "-execute" cmdparms) debug-param))) - ;; (set! fullcmd (append launcher (car hosts)(list remote-megatest test-sig "-execute" cmdparms)))) - (launcher - (set! fullcmd (append launcher (list remote-megatest "-m" test-sig "-execute" cmdparms) debug-param))) - ;; (set! fullcmd (append launcher (list remote-megatest test-sig "-execute" cmdparms)))) - (else - (if (not useshell)(debug:print 0 *default-log-port* "WARNING: internal launching will not work well without \"useshell yes\" in your [jobtools] section")) - (set! fullcmd (append (list remote-megatest "-m" test-sig "-execute" cmdparms) debug-param (list (if useshell "&" "")))))) - ;; (set! fullcmd (list remote-megatest test-sig "-execute" cmdparms (if useshell "&" ""))))) - (if (args:get-arg "-xterm")(set! fullcmd (append fullcmd (list "-xterm")))) - (debug:print 1 *default-log-port* "Launching " work-area) - ;; set pre-launch-env-vars before launching, keep the vars in prevvals and put the envionment back when done - (debug:print 4 *default-log-port* "fullcmd: " fullcmd) - (let* ((commonprevvals (alist->env-vars - (hash-table-ref/default *configdat* "env-override" '()))) - (testprevvals (alist->env-vars - (hash-table-ref/default tconfig "pre-launch-env-overrides" '()))) - (miscprevvals (alist->env-vars ;; consolidate this code with the code in megatest.scm for "-execute" - (append (list (list "MT_TEST_RUN_DIR" work-area) - (list "MT_TEST_NAME" test-name) - (list "MT_ITEM_INFO" (conc itemdat)) - (list "MT_RUNNAME" runname) - (list "MT_TARGET" mt_target) - (list "MT_ITEMPATH" item-path) - ) - itemdat))) - ;; Launchwait defaults to true, must override it to turn off wait - (launchwait (if (equal? (configf:lookup *configdat* "setup" "launchwait") "no") #f #t)) - (launch-results (apply (if launchwait - process:cmd-run-with-stderr->list - process-run) - (if useshell - (let ((cmdstr (string-intersperse fullcmd " "))) - (if launchwait - cmdstr - (conc cmdstr " >> mt_launch.log 2>&1"))) - (car fullcmd)) - (if useshell - '() - (cdr fullcmd))))) - (if (not launchwait) ;; give the OS a little time to allow the process to start - (thread-sleep! 0.01)) - (with-output-to-file "mt_launch.log" - (lambda () - (print "LAUNCHCMD: " (string-intersperse fullcmd " ")) - (if (list? launch-results) - (apply print launch-results) - (print "NOTE: launched \"" fullcmd "\"\n but did not wait for it to proceed. Add the following to megatest.config \n[setup]\nlaunchwait yes\n if you have problems with this")) - #:append)) - (debug:print 2 *default-log-port* "Launching completed, updating db") - (debug:print 2 *default-log-port* "Launch results: " launch-results) - (if (not launch-results) - (begin - (print "ERROR: Failed to run " (string-intersperse fullcmd " ") ", exiting now") - ;; (sqlite3:finalize! db) - ;; good ole "exit" seems not to work - ;; (_exit 9) - ;; but this hack will work! Thanks go to Alan Post of the Chicken email list - ;; NB// Is this still needed? Should be safe to go back to "exit" now? - (process-signal (current-process-id) signal/kill) - )) - (alist->env-vars miscprevvals) - (alist->env-vars testprevvals) - (alist->env-vars commonprevvals) - launch-results)) - (change-directory *toppath*)) + (mutex-lock! *launch-setup-mutex*) ;; setting variables and processing the testconfig is NOT thread-safe, reuse the launch-setup mutex + (let* ((item-path (item-list->path itemdat))) + (let loop ((delta (- (current-seconds) *last-launch*)) + (launch-delay (string->number (or (configf:lookup *configdat* "setup" "launch-delay") "5")))) + (if (> launch-delay delta) + (begin + (debug:print-info 0 *default-log-port* "Delaying launch of " test-name " for " (- launch-delay delta) " seconds") + (thread-sleep! (- launch-delay delta)) + (loop (- (current-seconds) *last-launch*) launch-delay)))) + (change-directory *toppath*) + (alist->env-vars ;; consolidate this code with the code in megatest.scm for "-execute", *maybe* - the longer they are set the longer each launch takes (must be non-overlapping with the vars) + (append + (list + (list "MT_RUN_AREA_HOME" *toppath*) + (list "MT_TEST_NAME" test-name) + (list "MT_RUNNAME" runname) + (list "MT_ITEMPATH" item-path) + ) + itemdat)) + (let* ((tregistry (tests:get-all)) ;; third param (below) is system-allowed + ;; for tconfig, why do we allow fallback to test-conf? + (tconfig (or (tests:get-testconfig test-name tregistry #t force-create: #t) + (begin + (debug:print 0 *default-log-port* "WARNING: falling back to pre-calculated testconfig. This is likely not desired.") + test-conf))) ;; force re-read now that all vars are set + (useshell (let ((ush (config-lookup *configdat* "jobtools" "useshell"))) + (if ush + (if (equal? ush "no") ;; must use "no" to NOT use shell + #f + ush) + #t))) ;; default is yes + (runscript (config-lookup tconfig "setup" "runscript")) + (ezsteps (> (length (hash-table-ref/default tconfig "ezsteps" '())) 0)) ;; don't send all the steps, could be big + ;; (diskspace (config-lookup tconfig "requirements" "diskspace")) + ;; (memory (config-lookup tconfig "requirements" "memory")) + ;; (hosts (config-lookup *configdat* "jobtools" "workhosts")) ;; I'm pretty sure this was never completed + (remote-megatest (config-lookup *configdat* "setup" "executable")) + (run-time-limit (or (configf:lookup tconfig "requirements" "runtimelim") + (configf:lookup *configdat* "setup" "runtimelim"))) + ;; FIXME SOMEDAY: not good how this is so obtuse, this hack is to + ;; allow running from dashboard. Extract the path + ;; from the called megatest and convert dashboard + ;; or dboard to megatest + (local-megatest (let* ((lm (car (argv))) + (dir (pathname-directory lm)) + (exe (pathname-strip-directory lm))) + (conc (if dir (conc dir "/") "") + (case (string->symbol exe) + ((dboard) "../megatest") + ((mtest) "../megatest") + ((dashboard) "megatest") + (else exe))))) + (launcher (common:get-launcher *configdat* test-name item-path)) ;; (config-lookup *configdat* "jobtools" "launcher")) + (test-sig (conc (common:get-testsuite-name) ":" test-name ":" item-path)) ;; (item-list->path itemdat))) ;; test-path is the full path including the item-path + (work-area #f) + (toptest-work-area #f) ;; for iterated tests the top test contains data relevant for all + (diskpath #f) + (cmdparms #f) + (fullcmd #f) ;; (define a (with-output-to-string (lambda ()(write x)))) + (mt-bindir-path #f) + (testinfo (rmt:get-test-info-by-id run-id test-id)) + (mt_target (string-intersperse (map cadr keyvals) "/")) + (debug-param (append (if (args:get-arg "-debug") (list "-debug" (args:get-arg "-debug")) '()) + (if (args:get-arg "-logging")(list "-logging") '())))) + ;; (if hosts (set! hosts (string-split hosts))) + ;; set the megatest to be called on the remote host + (if (not remote-megatest)(set! remote-megatest local-megatest)) ;; "megatest")) + (set! mt-bindir-path (pathname-directory remote-megatest)) + (if launcher (set! launcher (string-split launcher))) + ;; set up the run work area for this test + (if (and (args:get-arg "-preclean") ;; user has requested to preclean for this run + (not (member (db:test-get-rundir testinfo)(list "n/a" "/tmp/badname")))) ;; n/a is a placeholder and thus not a read dir + (begin + (debug:print-info 0 *default-log-port* "attempting to preclean directory " (db:test-get-rundir testinfo) " for test " test-name "/" item-path) + (runs:remove-test-directory testinfo 'remove-data-only))) ;; remove data only, do not perturb the record + + ;; prevent overlapping actions - set to LAUNCHED as early as possible + ;; + ;; the following call handles waiver propogation. cannot yet condense into roll-up-pass-fail + (tests:test-set-status! run-id test-id "LAUNCHED" "n/a" #f #f) ;; (if launch-results launch-results "FAILED")) + (rmt:roll-up-pass-fail-counts run-id test-name item-path #f "LAUNCHED" #f) + ;; (pp (hash-table->alist tconfig)) + (set! diskpath (get-best-disk *configdat* tconfig)) + (if diskpath + (let ((dat (create-work-area run-id run-info keyvals test-id test-path diskpath test-name itemdat))) + (set! work-area (car dat)) + (set! toptest-work-area (cadr dat)) + (debug:print-info 2 *default-log-port* "Using work area " work-area)) + (begin + (set! work-area (conc test-path "/tmp_run")) + (create-directory work-area #t) + (debug:print 0 *default-log-port* "WARNING: No disk work area specified - running in the test directory under tmp_run"))) + (set! cmdparms (base64:base64-encode + (z3:encode-buffer + (with-output-to-string + (lambda () ;; (list 'hosts hosts) + (write (list (list 'testpath test-path) + (list 'transport (conc *transport-type*)) + ;; (list 'serverinf *server-info*) + (list 'toppath *toppath*) + (list 'work-area work-area) + (list 'test-name test-name) + (list 'runscript runscript) + (list 'run-id run-id ) + (list 'test-id test-id ) + ;; (list 'item-path item-path ) + (list 'itemdat itemdat ) + (list 'megatest remote-megatest) + (list 'ezsteps ezsteps) + (list 'target mt_target) + (list 'runtlim (if run-time-limit (common:hms-string->seconds run-time-limit) #f)) + (list 'env-ovrd (hash-table-ref/default *configdat* "env-override" '())) + (list 'set-vars (if params (hash-table-ref/default params "-setvars" #f))) + (list 'runname runname) + (list 'mt-bindir-path mt-bindir-path)))))))) + + ;; clean out step records from previous run if they exist + ;; (rmt:delete-test-step-records run-id test-id) + ;; if the dir does not exist we may have a itempath where individual variables are a path, launch anyway + (if (file-exists? work-area) + (change-directory work-area)) ;; so that log files from the launch process don't clutter the test dir + (cond + ;; ((and launcher hosts) ;; must be using ssh hostname + ;; (set! fullcmd (append launcher (car hosts)(list remote-megatest "-m" test-sig "-execute" cmdparms) debug-param))) + ;; (set! fullcmd (append launcher (car hosts)(list remote-megatest test-sig "-execute" cmdparms)))) + (launcher + (set! fullcmd (append launcher (list remote-megatest "-m" test-sig "-execute" cmdparms) debug-param))) + ;; (set! fullcmd (append launcher (list remote-megatest test-sig "-execute" cmdparms)))) + (else + (if (not useshell)(debug:print 0 *default-log-port* "WARNING: internal launching will not work well without \"useshell yes\" in your [jobtools] section")) + (set! fullcmd (append (list remote-megatest "-m" test-sig "-execute" cmdparms) debug-param (list (if useshell "&" "")))))) + ;; (set! fullcmd (list remote-megatest test-sig "-execute" cmdparms (if useshell "&" ""))))) + (if (args:get-arg "-xterm")(set! fullcmd (append fullcmd (list "-xterm")))) + (debug:print 1 *default-log-port* "Launching " work-area) + ;; set pre-launch-env-vars before launching, keep the vars in prevvals and put the envionment back when done + (debug:print 4 *default-log-port* "fullcmd: " fullcmd) + (set! *last-launch* (current-seconds)) ;; all that junk above takes time, set this as late as possible. + (let* ((commonprevvals (alist->env-vars + (hash-table-ref/default *configdat* "env-override" '()))) + (miscprevvals (alist->env-vars ;; consolidate this code with the code in megatest.scm for "-execute" + (append (list (list "MT_TEST_RUN_DIR" work-area) + (list "MT_TEST_NAME" test-name) + (list "MT_ITEM_INFO" (conc itemdat)) + (list "MT_RUNNAME" runname) + (list "MT_TARGET" mt_target) + (list "MT_ITEMPATH" item-path) + ) + itemdat))) + (testprevvals (alist->env-vars + (hash-table-ref/default tconfig "pre-launch-env-overrides" '()))) + ;; Launchwait defaults to true, must override it to turn off wait + (launchwait (if (equal? (configf:lookup *configdat* "setup" "launchwait") "no") #f #t)) + (launch-results (apply (if launchwait + process:cmd-run-with-stderr->list + process-run) + (if useshell + (let ((cmdstr (string-intersperse fullcmd " "))) + (if launchwait + cmdstr + (conc cmdstr " >> mt_launch.log 2>&1"))) + (car fullcmd)) + (if useshell + '() + (cdr fullcmd))))) + (mutex-unlock! *launch-setup-mutex*) ;; yes, really should mutex all the way to here. Need to put this entire process into a fork. + (if (not launchwait) ;; give the OS a little time to allow the process to start + (thread-sleep! 0.01)) + (with-output-to-file "mt_launch.log" + (lambda () + (print "LAUNCHCMD: " (string-intersperse fullcmd " ")) + (if (list? launch-results) + (apply print launch-results) + (print "NOTE: launched \"" fullcmd "\"\n but did not wait for it to proceed. Add the following to megatest.config \n[setup]\nlaunchwait yes\n if you have problems with this")) + #:append)) + (debug:print 2 *default-log-port* "Launching completed, updating db") + (debug:print 2 *default-log-port* "Launch results: " launch-results) + (if (not launch-results) + (begin + (print "ERROR: Failed to run " (string-intersperse fullcmd " ") ", exiting now") + ;; (sqlite3:finalize! db) + ;; good ole "exit" seems not to work + ;; (_exit 9) + ;; but this hack will work! Thanks go to Alan Post of the Chicken email list + ;; NB// Is this still needed? Should be safe to go back to "exit" now? + (process-signal (current-process-id) signal/kill) + )) + (alist->env-vars miscprevvals) + (alist->env-vars testprevvals) + (alist->env-vars commonprevvals) + launch-results)) + (change-directory *toppath*))) ;; recover a test where the top controlling mtest may have died ;; (define (launch:recover-test run-id test-id) ;; this function is called on the test run host via ssh Index: megatest-version.scm ================================================================== --- megatest-version.scm +++ megatest-version.scm @@ -1,7 +1,7 @@ ;; Always use two or four digit decimal ;; 1.01, 1.02...1.10,1.11,1.1101 ... 1.99,2.00.. (declare (unit megatest-version)) -(define megatest-version 1.6208) +(define megatest-version 1.6302) Index: megatest.scm ================================================================== --- megatest.scm +++ megatest.scm @@ -118,11 +118,11 @@ fields category,variable,value,comment Queries -list-runs patt : list runs matching pattern \"patt\", % is the wildcard -show-keys : show the keys used in this megatest setup - -test-files targpatt : get the most recent test path/file matching targpatt e.g. %/%... + -test-files targpatt : get the most recent test path/file matching targpatt e.g. %/% or '*.log' returns list sorted by age ascending, see examples below -test-paths : get the test paths matching target, runname, item and test patterns. -list-disks : list the disks available for storing runs -list-targets : list the targets in runconfigs.config @@ -790,23 +790,24 @@ ;;====================================================================== ;; Weird special calls that need to run *after* the server has started? ;;====================================================================== (if (args:get-arg "-list-targets") - (let ((targets (common:get-runconfig-targets))) - (debug:print 1 *default-log-port* "Found "(length targets) " targets") - (case (string->symbol (or (args:get-arg "-dumpmode") "alist")) - ((alist) - (for-each (lambda (x) - ;; (print "[" x "]")) - (print x)) - targets)) - ((json) - (json-write targets)) - (else - (debug:print-error 0 *default-log-port* "dump output format " (args:get-arg "-dumpmode") " not supported for -list-targets"))) - (set! *didsomething* #t))) + (if (launch:setup) + (let ((targets (common:get-runconfig-targets))) + (debug:print 1 *default-log-port* "Found "(length targets) " targets") + (case (string->symbol (or (args:get-arg "-dumpmode") "alist")) + ((alist) + (for-each (lambda (x) + ;; (print "[" x "]")) + (print x)) + targets)) + ((json) + (json-write targets)) + (else + (debug:print-error 0 *default-log-port* "dump output format " (args:get-arg "-dumpmode") " not supported for -list-targets"))) + (set! *didsomething* #t)))) ;; cache the runconfigs in $MT_LINKTREE/$MT_TARGET/$MT_RUNNAME/.runconfig ;; (define (full-runconfigs-read) ;; in the envprocessing branch the below code replaces the further below code @@ -1018,29 +1019,30 @@ ;; "%")) (keys (rmt:get-keys)) ;; (db:get-keys dbstruct)) ;; (runsdat (db:get-runs dbstruct runpatt #f #f '())) ;; (runsdat (rmt:get-runs-by-patt keys (or runpatt "%") (common:args-get-target) ;; (db:get-runs-by-patt dbstruct keys (or runpatt "%") (common:args-get-target) ;; #f #f '("id" "runname" "state" "status" "owner" "event_time" "comment") 0)) - (runsdat (db:dispatch-query access-mode rmt:get-runs-by-patt db:get-runs-by-patt keys (or runpatt "%") - (common:args-get-target) #f #f '("id" "runname" "state" "status" "owner" "event_time" "comment") 0)) + (runsdat (rmt:get-runs-by-patt keys (or runpatt "%") + (common:args-get-target) #f #f '("id" "runname" "state" "status" "owner" "event_time" "comment") 0)) (runstmp (db:get-rows runsdat)) (header (db:get-header runsdat)) ;; this is "-since" support. This looks at last mod times of .db files ;; and collects those modified since the -since time. - (runs (if (and (not (null? runstmp)) - (args:get-arg "-since")) - (let ((changed-ids (db:get-changed-run-ids (string->number (args:get-arg "-since"))))) - (let loop ((hed (car runstmp)) - (tal (cdr runstmp)) - (res '())) - (let ((new-res (if (member (db:get-value-by-header hed header "id") changed-ids) - (cons hed res) - res))) - (if (null? tal) - (reverse new-res) - (loop (car tal)(cdr tal) new-res))))) - runstmp)) + (runs runstmp) + ;; (if (and (not (null? runstmp)) + ;; (args:get-arg "-since")) + ;; (let ((changed-ids (db:get-changed-run-ids (string->number (args:get-arg "-since"))))) + ;; (let loop ((hed (car runstmp)) + ;; (tal (cdr runstmp)) + ;; (res '())) + ;; (let ((new-res (if (member (db:get-value-by-header hed header "id") changed-ids) + ;; (cons hed res) + ;; res))) + ;; (if (null? tal) + ;; (reverse new-res) + ;; (loop (car tal)(cdr tal) new-res))))) + ;; runstmp)) (db-targets (args:get-arg "-list-db-targets")) (seen (make-hash-table)) (dmode (let ((d (args:get-arg "-dumpmode"))) (if d (string->symbol d) #f))) (data (make-hash-table)) @@ -1527,11 +1529,12 @@ (let* ((keys (rmt:get-keys)) ;; db:test-get-paths must not be run remote (paths (tests:test-get-paths-matching keys target (args:get-arg "-test-files")))) (set! *didsomething* #t) (for-each (lambda (path) - (print path)) + (if (file-exists? path) + (print path))) paths))) ;; else do a general-run-call (general-run-call "-test-files" "Get paths to test" @@ -1825,11 +1828,12 @@ (begin (if (not (launch:setup)) (begin (debug:print 0 *default-log-port* "Failed to setup, exiting") (exit 1))) - (common:cleanup-db) + (let ((dbstruct (db:setup *toppath*))) + (common:cleanup-db dbstruct)) (set! *didsomething* #t))) (if (args:get-arg "-mark-incompletes") (begin (if (not (launch:setup)) Index: rmt.scm ================================================================== --- rmt.scm +++ rmt.scm @@ -588,12 +588,12 @@ (define (rmt:get-runs-by-patt keys runnamepatt targpatt offset limit fields last-runs-update) ;; fields of #f uses default (rmt:send-receive 'get-runs-by-patt #f (list keys runnamepatt targpatt offset limit fields last-runs-update))) (define (rmt:find-and-mark-incomplete run-id ovr-deadtime) - (if (rmt:send-receive 'have-incompletes? run-id (list run-id ovr-deadtime)) - (rmt:send-receive 'mark-incomplete run-id (list run-id ovr-deadtime)))) + ;; (if (rmt:send-receive 'have-incompletes? run-id (list run-id ovr-deadtime)) + (rmt:send-receive 'mark-incomplete run-id (list run-id ovr-deadtime))) ;; ) (define (rmt:get-main-run-stats run-id) (rmt:send-receive 'get-main-run-stats #f (list run-id))) (define (rmt:get-var varname) Index: tasks.scm ================================================================== --- tasks.scm +++ tasks.scm @@ -323,12 +323,12 @@ (res '())) (sqlite3:for-each-row (lambda (a . b) (set! res (cons (apply vector a b) res))) mdb - (conc "SELECT " selstr " FROM servers WHERE run_id=? AND state in ('available','running','dbprep') ORDER BY start_time DESC;") - run-id) + (conc "SELECT " selstr " FROM servers WHERE state in ('available','running','dbprep') ORDER BY start_time DESC;") + ) (vector header res))) (define (tasks:get-server mdb run-id #!key (retries 10)) (let ((res #f) (best #f)) Index: tests.scm ================================================================== --- tests.scm +++ tests.scm @@ -920,24 +920,30 @@ ;; MUST BE CALLED local! ;; (define (tests:test-get-paths-matching keynames target fnamepatt #!key (res '())) ;; BUG: Move the values derived from args to parameters and push to megatest.scm - (let* ((testpatt (if (args:get-arg "-testpatt")(args:get-arg "-testpatt") "%")) - (statepatt (if (args:get-arg ":state") (args:get-arg ":state") "%")) - (statuspatt (if (args:get-arg ":status") (args:get-arg ":status") "%")) - (runname (if (args:get-arg ":runname") (args:get-arg ":runname") "%")) + (let* ((testpatt (or (args:get-arg "-testpatt")(args:get-arg "-testpatt") "%")) + (statepatt (or (args:get-arg "-state") (args:get-arg ":state") "%")) + (statuspatt (or (args:get-arg "-status") (args:get-arg ":status") "%")) + (runname (or (args:get-arg "-runname") (args:get-arg ":runname") "%")) (paths-from-db (rmt:test-get-paths-matching-keynames-target-new keynames target res testpatt statepatt statuspatt runname))) (if fnamepatt (apply append (map (lambda (p) (if (directory-exists? p) - (glob (conc p "/" fnamepatt)) + (let ((glob-query (conc p "/" fnamepatt))) + (handle-exceptions + exn + (with-input-from-pipe + (conc "echo " glob-query) + read-lines) ;; we aren't going to try too hard. If glob breaks it is likely because someone tried to do */*/*.log or similar + (glob glob-query))) '())) paths-from-db)) paths-from-db))) @@ -1332,10 +1338,11 @@ "SELECT count(id) FROM test_rundat;") res)) 0) (define (tests:update-central-meta-info run-id test-id cpuload diskfree minutes uname hostname) + (rmt:general-call 'update-test-rundat run-id test-id (current-seconds) (or cpuload -1)(or diskfree -1) -1 (or minutes -1)) (if (and cpuload diskfree) (rmt:general-call 'update-cpuload-diskfree run-id cpuload diskfree test-id)) (if minutes (rmt:general-call 'update-run-duration run-id minutes test-id)) (if (and uname hostname) Index: tests/fullrun/tests/all_toplevel/testconfig ================================================================== --- tests/fullrun/tests/all_toplevel/testconfig +++ tests/fullrun/tests/all_toplevel/testconfig @@ -1,8 +1,8 @@ [ezsteps] calcresults megatest -list-runs $MT_RUNNAME -target $MT_TARGET -check_triggers cat $MT_RUN_AREA_HOME/triggers_$MT_RUN_NAME.dat +check_triggers cat $MT_RUN_AREA_HOME/triggers_$MT_RUNNAME.dat [logpro] check_triggers ;; (expect:error in "LogFileBody" = 0 "No errors" #/error/i) ADDED utils/remrun Index: utils/remrun ================================================================== --- /dev/null +++ utils/remrun @@ -0,0 +1,28 @@ +#!/bin/bash +############################################################################### +# +# remrun - same behavior as nbfake but first param is a hosthane +# (capture command output in a logfile) +# +# remrun behavior can be changed by setting the following env var: +# NBFAKE_LOG Logfile for nbfake output +# +############################################################################### + +if [[ -z "$@" ]]; then + cat <<__EOF + +remrun usage: + +remrun hostname + +remrun behavior can be changed by setting the following env vars: + NBFAKE_LOG Logfile for remrun output + +__EOF + exit +fi + +export NBFAKE_HOST=$1 +shift +exec nbfake $*
Table 3. API Keys Related CallsTable 4. API Keys Related Calls