Index: launch.scm
==================================================================
--- launch.scm
+++ launch.scm
@@ -68,11 +68,14 @@
 	       (csvr (db:logpro-dat->csv dat stepname))
 	       (csvt (let-values (( (fmt-cell fmt-record fmt-csv) (make-format ",")))
 				 (fmt-csv (map list->csv-record csvr))))
 	       (status (configf:lookup dat "final" "exit-status"))
 	       (msg     (configf:lookup dat "final" "message")))
-	  (rmt:csv->test-data run-id test-id csvt)
+          ;;(if csvt  ;; this if blocked stack dump caused by .dat file from logpro being 0-byte.  fixed by upgrading logpro
+              (rmt:csv->test-data run-id test-id csvt)
+            ;;  (BB> "Error: run-id/test-id/stepname="run-id"/"test-id"/"stepname" => bad csvr="csvr)
+            ;;  )
 	  (cond
 	   ((equal? status "PASS") "PASS") ;; skip the message part if status is pass
 	   (status (conc (configf:lookup dat "final" "exit-status") ": " (if msg msg "no message")))
 	   (else #f)))
 	#f)))

Index: tdb.scm
==================================================================
--- tdb.scm
+++ tdb.scm
@@ -209,11 +209,13 @@
 (define (tdb:load-test-data run-id test-id)
   (let loop ((lin (read-line)))
     (if (not (eof-object? lin))
 	(begin
 	  (debug:print 4 *default-log-port* lin)
-	  (rmt:csv->test-data run-id test-id lin)
+          ;;(when lin ;; this when blocked stack dump caused by .dat file from logpro being 0-byte.  fixed by upgrading logpro
+          (rmt:csv->test-data run-id test-id lin)
+          ;;)
 	  (loop (read-line)))))
   ;; roll up the current results.
   ;; FIXME: Add the status too 
   (rmt:test-data-rollup run-id test-id #f))
 
@@ -221,11 +223,13 @@
 (define (tdb:load-logpro-data run-id test-id)
   (let loop ((lin (read-line)))
     (if (not (eof-object? lin))
 	(begin
 	  (debug:print 4 *default-log-port* lin)
-	  (rmt:csv->test-data run-id test-id lin)
+          ;;(when lin  ;; this when blocked stack dump caused by .dat file from logpro being 0-byte.  fixed by upgrading logpro
+          (rmt:csv->test-data run-id test-id lin)
+          ;;)
 	  (loop (read-line)))))
   ;; roll up the current results.
   ;; FIXME: Add the status too 
   (rmt:test-data-rollup run-id test-id #f))
 

Index: utils/installall.sh
==================================================================
--- utils/installall.sh
+++ utils/installall.sh
@@ -12,21 +12,59 @@
 #  PURPOSE.
 
 echo You may need to do the following first:
 echo sudo apt-get install libreadline-dev
 echo sudo apt-get install libwebkitgtk-dev 
-echo sudo apt-get install libpangox-1.0-0 zlib1g-dev libfreetype6-dev
+echo sudo apt-get install libpangox-1.0-0 zlib1g-dev libfreetype6-dev cmake
 echo sudo apt-get install libssl-dev
 echo sudo apt-get install libmotif3 -OR- set KTYPE=26g4
-echo KTYPE can be 26, 26g4, or 32
-echo  
-echo KTYPE=$KTYPE
+echo
+echo Set OPTION to std, currently OPTION=$OPTION
+echo
+echo Additionally, if you want mysql-client, you will need to make sure
+echo mysql_config is in your path
+echo
 echo You are using PREFIX=$PREFIX
 echo You are using proxy="$proxy"
 echo 
 echo "Set additional_libpath to help find gtk or other libraries, don't forget a leading :"
 
+SYSTEM_TYPE=$(lsb_release -irs |tr ' ' '_' |tr '\n' '-')$(uname -i)-$OPTION
+
+# Set up variables
+#
+case $SYSTEM_TYPE in
+Ubuntu-16.04-x86_64-std)
+	KTYPE=32
+	CDVER=5.10
+	IUPVER=3.17
+	IMVER=3.11
+	;;
+Ubuntu-16.04-i686-std)
+	KTYPE=32
+	CDVER=5.10
+	IUPVER=3.17
+	IMVER=3.11
+	;;
+SUSE_LINUX_11-x86_64-std)
+  KTYPE=26g4 
+	CDVER=5.10
+	IUPVER=3.17
+	IMVER=3.11
+  ;;
+CentOS_5.11-x86_64-std)
+  KTYPE=24g3 
+  CDVER=5.4.1
+  IUPVER=3.5
+  IMVER=3.6.3
+  ;; 
+esac
+			   
+echo KTYPE=$KTYPE			  
+echo CDVER=$CDVER
+echo IUPVER=$IUPVER
+echo IMVER=$IMVER	
 # NOTES:
 #
 # Centos with security setup may need to do commands such as following as root:
 #
 # NB// fix the paths first
@@ -87,12 +125,15 @@
 export LD_LIBRARY_PATH=$LIBPATH
 export CHICKEN_INSTALL=$PREFIX/bin/chicken-install
 mkdir -p $PREFIX
 echo "export PATH=$PREFIX/bin:\$PATH" > $PREFIX/setup-chicken4x.sh
 echo "export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:\$LD_LIBRARY_PATH" >> $PREFIX/setup-chicken4x.sh
+echo "export CHICKEN_DOC_PAGER=cat" >> $PREFIX/setup-chicken4x.sh
+
 echo "setenv PATH $PREFIX/bin:\$PATH" > $PREFIX/setup-chicken4x.csh
 echo "setenv LD_LIBRARY_PATH $LD_LIBRARY_PATH:\$LD_LIBRARY_PATH" >> $PREFIX/setup-chicken4x.csh
+echo "setenv CHICKEN_DOC_PAGER cat" >> $PREFIX/setup-chicken4x.csh
 
 echo PATH=$PATH
 echo LD_LIBRARY_PATH=$LD_LIBRARY_PATH
 
 if ! [[ -e $PREFIX/bin/csi ]]; then
@@ -141,20 +182,34 @@
 for egg in matchable readline apropos base64 regex-literals format "regex-case" "test" \
 	coops trace csv dot-locking posix-utils posix-extras directory-utils hostinfo \
 	tcp rpc csv-xml fmt json md5 awful http-client spiffy uri-common intarweb http-client \
 	spiffy-request-vars s md5 message-digest spiffy-directory-listing ssax sxml-serializer \
 	sxml-modifications logpro z3 call-with-environment-variables \
-	pathname-expand typed-records simple-exceptions numbers crypt parley srfi-42
+	pathname-expand typed-records simple-exceptions numbers crypt parley srfi-42 \
+	alist-lib ansi-escape-sequences args basic-sequences bindings chicken-doc chicken-doc-cmd \
+	cock condition-utils debug define-record-and-printer easyffi easyffi-base \
+	expand-full ezxdisp filepath foof-loop ini-file irc lalr lazy-seq \
+	locale locale-builtin locale-categories locale-components locale-current locale-posix \
+	locale-timezone loops low-level-macros procedural-macros refdb rfc3339 scsh-process \
+	sexp-diff sha1 shell slice srfi-101 srfi-19 srfi-19-core srfi-19-date srfi-19-io \
+	srfi-19-period srfi-19-support srfi-19-time srfi-19-timezone srfi-29 srfi-37 srfi-78 syslog \
+	udp uuid uuid-lib zlib
+
 do
 	echo "Installing $egg"
 	$CHICKEN_INSTALL $PROX -keep-installed $egg
 	#$CHICKEN_INSTALL $PROX $egg
 	if [ $? -ne 0 ]; then
 		echo "$egg failed to install"
 		exit 1
 	fi
 done
+
+if [[ -e `which mysql_config` ]]; then
+  $CHICKEN_INSTALL $PROX -keep-installed mysql-client
+fi
+
 for egg in "sqlite3" sql-de-lite nanomsg
 do
 	echo "Installing $egg"
 	CSC_OPTIONS="-I$PREFIX/include -L$PREFIX/lib -L$PREFIX/lib64"  $CHICKEN_INSTALL $PROX -keep-installed $egg
 	#CSC_OPTIONS="-I$PREFIX/include -L$PREFIX/lib -L$PREFIX/lib64"  $CHICKEN_INSTALL $PROX $egg
@@ -161,28 +216,34 @@
 	if [ $? -ne 0 ]; then
 		echo "$egg failed to install"
 		exit 1
 	fi
 done
+cd $BUILDHOME
+cd `$PREFIX/bin/csi -p '(chicken-home)'`
+curl http://3e8.org/pub/chicken-doc/chicken-doc-repo.tgz | tar zx
+cd $BUILDHOME
+
+
 
 # $CHICKEN_INSTALL $PROX sqlite3
 cd $BUILDHOME
-# IUP versions
-if [[ x$USEOLDIUP == "x" ]];then
-  CDVER=5.10
-  IUPVER=3.17
-  IMVER=3.11
-else
-  CDVER=5.10
-  IUPVER=3.17
-  IMVER=3.11
-fi
-if [[ x$KTYPE == "x24g3" ]];then
-  CDVER=5.4.1
-  IUPVER=3.5
-  IMVER=3.6.3
-fi
+# # IUP versions
+# if [[ x$USEOLDIUP == "x" ]];then
+#   CDVER=5.10
+#   IUPVER=3.17
+#   IMVER=3.11
+# else
+#   CDVER=5.10
+#   IUPVER=3.17
+#   IMVER=3.11
+# fi
+# if [[ x$KTYPE == "x24g3" ]];then
+#   CDVER=5.4.1
+#   IUPVER=3.5
+#   IMVER=3.6.3
+# fi
 
 if [[ `uname -a | grep x86_64` == "" ]]; then 
     export ARCHSIZE=''
 else
     export ARCHSIZE=64_
@@ -210,11 +271,11 @@
     # (cd $DEPLOYTARG;tar xfvz $BUILDHOME/$a)
 done
 cp iup/include/* $PREFIX/include/
 cp iup/*.so $PREFIX/lib/
 cp iup/*.a $PREFIX/lib/
-cp iup/ftgl/lib/Linux26g4_64/* $PREFIX/lib/
+cp iup/ftgl/lib/*/* $PREFIX/lib/
 cd $BUILDHOME
 # ffcall obtained from:
 # cvs -z3 -d:pserver:anonymous@cvs.savannah.gnu.org:/sources/libffcall co ffcall 
 #exit
 if ! [[ -e $PREFIX/include/callback.h ]] ; then
@@ -286,5 +347,7 @@
 echo You may need to add $LD_LIBRARY_PATH to your LD_LIBRARY_PATH variable, a setup-chicken4x.sh 
 echo file can be found in the current directory which should work for setting up to run chicken4x
 
 echo Testing iup
 $PREFIX/bin/csi -b -eval '(use iup)(print "Success")'
+
+