Megatest

# 
#     You should have received a copy of the GNU General Public License
#     along with Megatest.  If not, see <http://www.gnu.org/licenses/>.

TODO
====

WW38
. Add test_rundat to no-sync ==> correction, put in <testdir>/.meta/test-run.dat
. Add STATE/STATUS transitions to .meta/test-run.dat or similar
. Swizzle update-test-rundat to operate on no-sync
. Swizzle update-run-duration, -uname-host and cpuload-diskfree to no-sync
. On state/status change update tests table with duration

WW15
. fill newview matrix with data, filter pipeline gui elements
. improve [script], especially indent handling

WW16
. split db into megatest.db (runs etc.) db/<something>.db
. release basic newview implementation

  (let* ((run-ids (db:get-all-run-ids mtdb)))
    (for-each 
     (lambda (run-id)
       (let ((testrecs (db:get-all-tests-info-by-run-id mtdb run-id)))
	 (db:prep-megatest.db-adj-test-ids (db:dbdat-get-db mtdb) run-id testrecs)))
     run-ids)))

;; Get test data using test_id, run-id is not used
;; Get test data using test_id, run-id is not used - but it will be!
;; 
(define (db:get-test-info-by-id dbstruct run-id test-id)
  (db:with-db
   dbstruct
   #f ;; run-id
   #f
   (lambda (db)

    ;; (tests:set-full-meta-info test-id run-id (calc-minutes) work-area)
    (tests:set-full-meta-info #f test-id run-id (calc-minutes) work-area 10)

    (let loop ((minutes   (calc-minutes))
	       (cpu-load  (alist-ref 'adj-core-load (common:get-normalized-cpu-load #f)))
	       (disk-free (get-df (current-directory)))
               (last-sync (current-seconds)))
      (common:telemetry-log "zombie" (conc "launch:monitor-job - top of loop encountered at "(current-seconds)" with last-sync="last-sync))
      ;; (common:telemetry-log "zombie" (conc "launch:monitor-job -
      ;; top of loop encountered at "(current-seconds)" with
      ;; last-sync="last-sync))
      (let* ((over-time     (> (current-seconds) (+ last-sync update-period)))
             (new-cpu-load  (let* ((load  (alist-ref 'adj-core-load (common:get-normalized-cpu-load #f)))
                                   (delta (abs (- load cpu-load))))
                              (if (> delta 0.1) ;; don't bother updating with small changes
                                  load
                                  #f)))
             (new-disk-free (let* ((df    (if over-time ;; only get df every 30 seconds

             (do-sync       (or new-cpu-load new-disk-free over-time))

             (test-info   (rmt:get-test-info-by-id run-id test-id))
             (state       (db:test-get-state test-info))
             (status      (db:test-get-status test-info))
             (kill-reason  "no kill reason specified")
             (kill-job?    #f))
        (common:telemetry-log "zombie" (conc "launch:monitor-job - decision time encountered at "(current-seconds)" with last-sync="last-sync" do-sync="do-sync" over-time="over-time" update-period="update-period))
        #;(common:telemetry-log "zombie" (conc "launch:monitor-job - decision time encountered at "(current-seconds)" with last-sync="last-sync" do-sync="do-sync" over-time="over-time" update-period="update-period))
        (cond
         ((test-get-kill-request run-id test-id)
          (set! kill-reason "KILLING TEST since received kill request (KILLREQ)")
          (set! kill-job? #t))
         ((and runtlim (> (- (current-seconds) start-seconds) runtlim))
          (set! kill-reason (conc "KILLING TEST DUE TO TIME LIMIT EXCEEDED! Runtime=" (- (current-seconds) start-seconds) " seconds, limit=" runtlim))
          (set! kill-job? #t))

				(db:test-get-host        test-info)
				(begin
				  (debug:print 0 *default-log-port* "ERROR: failed to find a record for test-id " test-id ", exiting.")
				  (exit))))
		 (test-pid  (db:test-get-process_id  test-info)))
	    (cond
             ;; -mrw- I'm removing KILLREQ from this list so that a test in KILLREQ state is treated as a "do not run" flag.
	     ;;((or (member (db:test-get-state test-info) '("INCOMPLETE" "KILLED" "UNKNOWN" "STUCK")) ;; prior run of this test didn't complete, go ahead and try to rerun
	     ;;	  (and (equal? (db:test-get-state test-info) "COMPLETED")                           ;; completed/abort => rerun if asked
	     ;;	       (member (db:test-get-status test-info) '("ABORT"))))
	     ((member (db:test-get-state test-info) '("INCOMPLETE" "KILLED" "UNKNOWN" "STUCK")) ;; prior run of this test didn't complete, go ahead and try to rerun
	      (debug:print 0 *default-log-port* "INFO: test is INCOMPLETE or KILLED, treat this execute call as a rerun request")
	      ;; (tests:test-force-state-status! run-id test-id "REMOTEHOSTSTART" "n/a")

              (rmt:general-call 'set-test-start-time #f test-id)
              (rmt:test-set-state-status run-id test-id "REMOTEHOSTSTART" "n/a" #f)
	      ) ;; prime it for running

         "-show-runconfig"
         "-show-config"
         "-show-cmdinfo"
	 "-cleanup-db"))
       (no-watchdog-args-vals (filter (lambda (x) x)
                                      (map args:get-arg no-watchdog-args)))
       (start-watchdog (null? no-watchdog-args-vals)))
       ;(print  "no-watchdog-args="no-watchdog-args "no-watchdog-args-vals="no-watchdog-args-vals " start-watchdog-specail-arg-val:" start-watchdog-specail-arg-val " start-watchdog:" start-watchdog) 
       ;;(print  "no-watchdog-args="no-watchdog-args "no-watchdog-args-vals="no-watchdog-args-vals " start-watchdog-specail-arg-val:" start-watchdog-specail-arg-val " start-watchdog:" start-watchdog) 
  ;;(BB> "no-watchdog-args="no-watchdog-args "no-watchdog-args-vals="no-watchdog-args-vals) 
  (if start-watchdog
      (thread-start! *watchdog*)))


;; bracket open-output-file with code to make leading directory if it does not exist and handle exceptions
(define (open-logfile logpath-in)

;; Just some syntatic sugar
(define (rmt:register-test run-id test-name item-path)
  (rmt:general-call 'register-test run-id run-id test-name item-path))

(define (rmt:get-test-id run-id testname item-path)
  (rmt:send-receive 'get-test-id run-id (list run-id testname item-path)))

;; run-id is NOT used
;; run-id is NOT used - but it will be! 
;;
(define (rmt:get-test-info-by-id run-id test-id)
  (if (number? test-id)
      (rmt:send-receive 'get-test-info-by-id run-id (list run-id test-id))
      (begin
	(debug:print 0 *default-log-port* "WARNING: Bad data handed to rmt:get-test-info-by-id run-id=" run-id ", test-id=" test-id)
	(print-call-chain (current-error-port))

;; wait for server=start-last to be three seconds old
;;
(define (server:wait-for-server-start-last-flag areapath)
  (let* ((start-flag (conc areapath "/logs/server-start-last"))
	 ;;; THIS INTERACTS WITH [server] timeout. Suggest using 0.1 or above for timeout (6 seconds)
	 (reftime    (configf:lookup-number *configdat* "server" "idletime" default: 4))
	 (server-key (conc (get-host-name) "-" (current-process-id))))
    (thread-sleep! (/ (random 500) 1000))
    ;; (thread-sleep! (/ (random 500) 1000)) ;; I don't think this made a difference
    (if (file-exists? start-flag)
	(let* ((fmodtime (file-modification-time start-flag))
	       (delta    (- (current-seconds) fmodtime))
	       (all-go   (> delta reftime)))
	  (if (and all-go
		   (begin
		     (with-output-to-file start-flag

;; remove tasks given by a string of numbers comma separated
(define (tasks:remove-queue-entries dbstruct task-ids)
  (db:with-db
   dbstruct #f #t
   (lambda (db)
     (sqlite3:execute db (conc "DELETE FROM tasks_queue WHERE id IN (" task-ids ");")))))

;; #;(define (tasks:process-queue dbstruct)
;; (define (tasks:process-queue dbstruct)
;;   (let* ((task   (tasks:snag-a-task dbstruct))
;; 	 (action (if task (tasks:task-get-action task) #f)))
;;     (if action (print "tasks:process-queue task: " task))
;;     (if action
;; 	(case (string->symbol action)
;; 	  ((run)       (tasks:start-run     dbstruct task))
;; 	  ((remove)    (tasks:remove-runs   dbstruct task))