Megatest

;;
;; (define (db:launch-delay-left dbstruct run-id launch-delay)
  

;;  select end_time-now from
;;      (select testname,item_path,event_time+run_duration as
;;                          end_time,strftime('%s','now') as now from tests where state in
;;      ('RUNNING','REMOTEHOSTSTART','LAUNCED'));
;;      ('RUNNING','REMOTEHOSTSTART','LAUNCHED'));

(define (db:find-and-mark-incomplete dbstruct run-id ovr-deadtime)
  (let* ((incompleted '())
	 (oldlaunched '())
	 (toplevels   '())
	 (deadtime-str (configf:lookup *configdat* "setup" "deadtime")) ;; FIXME suspect test run time & deadtime are not well matched; resulting in COMPLETED/DEAD status of an a-ok running test
	 (deadtime     (if (and deadtime-str

;; 3. create link from run dir to megatest runs area 
;; 4. remotely run the test on allocated host
;;    - could be ssh to host from hosts table (update regularly with load)
;;    - could be netbatch
;;      (launch-test db (cadr status) test-conf))
(define (launch-test test-id run-id run-info keyvals runname test-conf test-name test-path itemdat params)
  (mutex-lock! *launch-setup-mutex*) ;; setting variables and processing the testconfig is NOT thread-safe, reuse the launch-setup mutex
  (BB> "entered launch-test")
  (let* ( ;; (lock-key        (conc "test-" test-id))
	;; (got-lock        (let loop ((lock        (rmt:no-sync-get-lock lock-key))
	;; 			     (expire-time (+ (current-seconds) 15))) ;; give up on getting the lock and steal it after 15 seconds
	;; 		    (if (car lock)
	;; 			#t
	;; 			(if (> (current-seconds) expire-time)
	;; 			    (begin

       (list "MT_RUN_AREA_HOME" *toppath*)
       (list "MT_TEST_NAME" test-name)
       (list "MT_RUNNAME"   runname)
       (list "MT_ITEMPATH"  item-path)
       (list "MT_CONTOUR"   contour)
       )
      itemdat))
    (BB> "set env vars")
    (let* ((tregistry       (tests:get-all)) ;; third param (below) is system-allowed
           ;; for tconfig, why do we allow fallback to test-conf?
	   (tconfig         (or (tests:get-testconfig test-name item-path tregistry #t force-create: #t)
				(begin
                                  (debug:print 0 *default-log-port* "WARNING: falling back to pre-calculated testconfig. This is likely not desired.")
                                  test-conf))) ;; force re-read now that all vars are set
	   (useshell        (let ((ush (config-lookup *configdat* "jobtools"     "useshell")))

	   (cmdparms   #f)
	   (fullcmd    #f) ;; (define a (with-output-to-string (lambda ()(write x))))
	   (mt-bindir-path #f)
	   (testinfo   (rmt:get-test-info-by-id run-id test-id))
	   (mt_target  (string-intersperse (map cadr keyvals) "/"))
	   (debug-param (append (if (args:get-arg "-debug")  (list "-debug" (args:get-arg "-debug")) '())
				(if (args:get-arg "-logging")(list "-logging") '()))))
      (BB> "entered let 1")
      ;; (if hosts (set! hosts (string-split hosts)))
      ;; set the megatest to be called on the remote host
      (if (not remote-megatest)(set! remote-megatest local-megatest)) ;; "megatest"))
      (set! mt-bindir-path (pathname-directory remote-megatest))
      (if launcher (set! launcher (string-split launcher)))
      ;; set up the run work area for this test
      (if (and (args:get-arg "-preclean") ;; user has requested to preclean for this run
	       (not (member (db:test-get-rundir testinfo)(list "n/a" "/tmp/badname")))) ;; n/a is a placeholder and thus not a read dir
	  (begin
	    (debug:print-info 0 *default-log-port* "attempting to preclean directory " (db:test-get-rundir testinfo) " for test " test-name "/" item-path)
	    (runs:remove-test-directory testinfo 'remove-data-only))) ;; remove data only, do not perturb the record
      

      (BB> "after launcher set")
      ;; prevent overlapping actions - set to LAUNCHED as early as possible
      ;;
      ;; the following call handles waiver propogation. cannot yet condense into roll-up-pass-fail
      (tests:test-set-status! run-id test-id "LAUNCHED" "n/a" #f #f) ;; (if launch-results launch-results "FAILED"))
      (rmt:set-state-status-and-roll-up-items run-id test-name item-path #f "LAUNCHED" #f)
      ;; (pp (hash-table->alist tconfig))
      (set! diskpath (get-best-disk *configdat* tconfig))
      (BB> "after launch state set")
      (if diskpath
	  (let ((dat  (create-work-area run-id run-info keyvals test-id test-path diskpath test-name itemdat)))
	    (set! work-area (car dat))
	    (set! toptest-work-area (cadr dat))
	    (debug:print-info 2 *default-log-port* "Using work area " work-area))
	  (begin
	    (set! work-area (conc test-path "/tmp_run"))
	    (create-directory work-area #t)
	    (debug:print 0 *default-log-port* "WARNING: No disk work area specified - running in the test directory under tmp_run")))
      (BB> "after disk path set")
      (set! cmdparms (base64:base64-encode 
		      (z3:encode-buffer 
		       (with-output-to-string
			 (lambda () ;; (list 'hosts     hosts)
			   (write (list (list 'testpath  test-path)
					;; (list 'transport (conc *transport-type*))
					;; (list 'serverinf *server-info*)

					(list 'target    mt_target)
					(list 'contour   contour)
					(list 'runtlim   (if run-time-limit (common:hms-string->seconds run-time-limit) #f))
					(list 'env-ovrd  (hash-table-ref/default *configdat* "env-override" '())) 
					(list 'set-vars  (if params (hash-table-ref/default params "-setvars" #f)))
					(list 'runname   runname)
					(list 'mt-bindir-path mt-bindir-path))))))))
      
      (BB> "after cmdparams set")
      ;; clean out step records from previous run if they exist
      ;; (rmt:delete-test-step-records run-id test-id)
      ;; if the dir does not exist we may have a itempath where individual variables are a path, launch anyway
      (if (common:file-exists? work-area)
	  (change-directory work-area)) ;; so that log files from the launch process don't clutter the test dir
      (cond
       ;; ((and launcher hosts) ;; must be using ssh hostname

	(set! fullcmd (append (list remote-megatest "-m" test-sig "-execute" cmdparms) debug-param (list (if useshell "&" ""))))))
      ;; (set! fullcmd (list remote-megatest test-sig "-execute" cmdparms (if useshell "&" "")))))
      (if (args:get-arg "-xterm")(set! fullcmd (append fullcmd (list "-xterm"))))
      (debug:print 1 *default-log-port* "Launching " work-area)
      ;; set pre-launch-env-vars before launching, keep the vars in prevvals and put the envionment back when done
      (debug:print 4 *default-log-port* "fullcmd: " fullcmd)
      (set! *last-launch* (current-seconds)) ;; all that junk above takes time, set this as late as possible.
      (BB> "after set *last-launch*")
      (let* ((commonprevvals (alist->env-vars
      (let* ((commonprevvals (alist->env-vars ;; observed this let can be very slow. (>5 sec)
			      (hash-table-ref/default *configdat* "env-override" '())))
	     (miscprevvals   (alist->env-vars ;; consolidate this code with the code in megatest.scm for "-execute"
			      (append (list (list "MT_TEST_RUN_DIR" work-area)
					    (list "MT_TEST_NAME" test-name)
					    (list "MT_ITEM_INFO" (conc itemdat)) 
					    (list "MT_RUNNAME"   runname)
					    (list "MT_TARGET"    mt_target)

					  (if launchwait
					      cmdstr
					      (conc cmdstr " >> mt_launch.log 2>&1 &")))
					(car fullcmd))
				    (if useshell
					'()
					(cdr fullcmd)))))
        (BB> "let depth 2 entered")
        (mutex-unlock! *launch-setup-mutex*) ;; yes, really should mutex all the way to here. Need to put this entire process into a fork.
	;; (rmt:no-sync-del! lock-key)         ;; release the lock for starting this test
	(if (not launchwait) ;; give the OS a little time to allow the process to start
	    (thread-sleep! 0.01))
	(with-output-to-file "mt_launch.log"
	  (lambda ()
	    (print "LAUNCHCMD: " (string-intersperse fullcmd " "))

				    (if (string? jobg-count)
					(string->number jobg-count)
					jobg-count))))
    (if (> (+ num-running num-running-in-jobgroup) 0)
	(runs:inc-can-run-more-tests-count runsdat)) ;; (set! *runs:can-run-more-tests-count* (+ *runs:can-run-more-tests-count* 1)))
    (if (not (eq? *last-num-running-tests* num-running))
	(begin
	  (debug:print 2 *default-log-port* "max-concurrent-jobs: " max-concurrent-jobs ", num-running: " num-running)
	  (debug:print 1 *default-log-port* "max-concurrent-jobs: " max-concurrent-jobs ", num-running: " num-running)
	  (set! *last-num-running-tests* num-running)))
    (if (not (eq? 0 *globalexitstatus*))
	(list #f num-running num-running-in-jobgroup max-concurrent-jobs job-group-limit)
	(let ((can-not-run-more (cond
				 ;; if max-concurrent-jobs is set and the number running is greater 
				 ;; than it then cannot run more jobs
				 ((and max-concurrent-jobs (>= num-running max-concurrent-jobs))

                      (or (procedure? items)(eq? items 'have-procedure))))
                  waitons))
         (completed-prereq-items 
          (let ((foo (begin (BB> "hello prereqs: "prereqs) #t))
                (res (filter (lambda (test)
                               (BB> "foo - "test)
                               (and (vector? test)
                                    (equal? "COMPLETED" (db:test-get-state test))
                                    (equal? "COMPLETED" (db:test-get-state test))
                                    (not (equal? "" (db:test-get-item-path test)))))
                             prereqs)))
            res)) 

         )
    (debug:print-info 4 *default-log-port* "START OF INNER COND #2 "

                         (debug:print 0 *default-log-port* "WARNING: this condition is triggered when there were no items to expand and nothing to run. Please check your run for completeness")
                         (exit 0))
                       (set! runs:nothing-left-in-queue-count (+ runs:nothing-left-in-queue-count 1)))
                   #f)))

            ;;; desired result of below cond branch:
            ;;   we want to expand items in our test of interest (hed) in the following cases:
            ;;    case 1 - mode is itemmatch or itemwait: (TODO)
            ;;    case 1 - mode is itemmatch or itemwait: (DONE)
            ;;       - all prereq tests have been expanded
            ;;       - at least one prereq's items have completed
            ;;    case 2 - mode is toplevel   (DONE)
            ;;    case 2 - mode is toplevel   (PARTIAL)
            ;;       - prereqs are completed.
            ;;       - or no prereqs can complete (TODO)
            ;;    case 3 - mode not specified (DONE)
            ;;       - prereqs are completed and passed (we could consider removing "and passed" -- it would change behavior from current)
            
            ;;       - prereqs are completed and passed (we could consider removing "and passed" -- it would change behavior from current)          
                   
            ;; runs:expand-items case: toplevel or else no dangling prerequeistes -- expand items now.
            ((or
              (and have-itemized (null? unexpanded-prereqs) (not (null? completed-prereq-items)))
              (null? prereqs)            ;; nothing is in our way to proceed (need to expand this to an item level check.)
              (and (member 'toplevel testmode)   ;; for toplevel test - proceed (nothing in our way)
                   (null? non-completed)))
             (BB> "cb2")

		  (loop (runs:queue-next-hed tal reg reglen regfull)
			(runs:queue-next-tal tal reg reglen regfull)
			(runs:queue-next-reg tal reg reglen regfull)
			reruns))))
		  ;; (loop (car tal)(cdr tal) reg reruns))))

	(runs:incremental-print-results run-id)
	(debug:print 4 *default-log-port* "TOP OF LOOP => "
	(debug:print 1 *default-log-port* "TOP OF LOOP => "
		     "test-name: " test-name
		     "\n  test-record  " test-record
		     "\n  hed:         " hed
		     "\n  itemdat:     " itemdat
		     "\n  items:       " items
		     "\n  item-path:   " item-path
		     "\n  waitons:     " waitons

					    (not (member waiton reruns)))
				       1
				       #f))
				 waitons))))) ;; could do this more elegantly with a marker....
	  (debug:print 0 *default-log-port* "WARNING: Marking test " tfullname " as not runnable. It is waiting on tests that cannot be run. Giving up now.")
	  (hash-table-set! test-registry tfullname 'removed))


         ; BB - a possibility for preqfail propagation
         ;; ((and (not items) (string? item-path) (not (equal? item-path ""))
         ;;       (lset-intersection testmode '(itemmatch itemwait)))

         ;;  )

	 ;; items is #f then the test is ok to be handed off to launch (but not before)
	 ;; 
	 ((not items)
	  (debug:print-info 4 *default-log-port* "OUTER COND: (not items)")
	  (if (and (not (tests:match test-patts (tests:testqueue-get-testname test-record) item-path required: required-tests))
		   (not (null? tal)))
	      (loop (car tal)(cdr tal) reg reruns))

	    ;; (wait-loop (rmt:get-count-tests-running-for-run-id run-id) num-running))))
	    (wait-loop (rmt:get-count-tests-running-for-run-id run-id) num-running))))
    ;; LET* ((test-record
    ;; we get here on "drop through". All done!
    (runs:run-post-hook run-id)
    (debug:print-info 1 *default-log-port* "All tests launched")))

(define (runs:calc-fails prereqs-not-met)
(define (runs:calc-fails prereqs-not-met) ;; BB is this redundant with runs:runable-tests ?
  (filter (lambda (test)
            (or
	    (and (vector? test) ;; not (string? test))
		 (member (db:test-get-state test) '("INCOMPLETE" "COMPLETED"))
		 (not (member (db:test-get-status test)
			      '("PASS" "WARN" "CHECK" "WAIVED" "SKIP")))))
             (and (vector? test) ;; not (string? test))
                  (member (db:test-get-status test) '("TEN_STRIKES" "BLOCKED" "PREQ_FAIL" "ZERO_ITEMS" "PREQ_DISCARDED" "TIMED_OUT" "KILLED")))
             (and (vector? test) ;; not (string? test))
                  (member (db:test-get-state test) '("INCOMPLETE" "COMPLETED"))
                  (not (member (db:test-get-status test)
                               '("PASS" "WARN" "CHECK" "WAIVED" "SKIP"))))))
	  prereqs-not-met))

(define (runs:calc-prereq-fail prereqs-not-met)
  (filter (lambda (test)
	    (and (vector? test) ;; not (string? test))
		 (equal? (db:test-get-state test) "NOT_STARTED")
		 (not (member (db:test-get-status test)
                 (not (member (db:test-get-status test)
			      '("n/a" "KEEP_TRYING")))))
	  prereqs-not-met))

(define (runs:calc-not-completed prereqs-not-met) ;; filter out tests which have reached a ground state -- they are done one way or another.
  (filter 
   (lambda (t)
     (or (not (vector? t))
         (not (and (equal? (db:test-get-state t) "NOT_STARTED") (equal? (db:test-get-status t) "PREQ_FAIL")))
         (not (member (db:test-get-status t) '("TEN_STRIKES" "BLOCKED" "PREQ_FAIL" "ZERO_ITEMS" "PREQ_DISCARDED" "TIMED_OUT" "KILLED")))
	 (not (member (db:test-get-state t) '("INCOMPLETE" "COMPLETED")))))
   prereqs-not-met))

;; (define (runs:calc-not-completed prereqs-not-met)
;;   (filter
;;    (lambda (t)
;;      (or (not (vector? t))
;; 	 (not (equal? "COMPLETED" (db:test-get-state t)))))
;;    prereqs-not-met))

(define (runs:calc-runnable prereqs-not-met)
  (filter 
   (lambda (t)
     (or (not (vector? t))
	 (and (equal? "NOT_STARTED" (db:test-get-state t))
	      (member (db:test-get-status t)
		      '("n/a" "KEEP_TRYING")))
	 (and (equal? "RUNNING" (db:test-get-state t))))) ;; account for a test that is running
	 (and (member (db:test-get-state t) '("RUNNING" "LAUNCHED" "REMOTEHOSTSTART" ))))) ;; account for a test that is running
   prereqs-not-met))

(define (runs:pretty-string lst)
  (map (lambda (t)
	 (if (not (vector? t))
	     (conc t)
	     (conc (db:test-get-testname t)"/"(db:test-get-item-path t) ":" (db:test-get-state t) "/" (db:test-get-status t))))