Megatest

	 (handler   (make-busy-timeout (if (args:get-arg "-override-timeout")
					   (string->number (args:get-arg "-override-timeout"))
					   136000)))) ;; 136000))) ;; 136000 = 2.2 minutes
    (debug:print-info 11 "open-db, dbpath=" dbpath " argv=" (argv))
    (sqlite3:set-busy-handler! db handler)
    (if (not dbexists)
	(db:initialize db))
    ;; (db:set-sync db)
    db))

;; keeping it around for debugging purposes only
(define (open-run-close-no-exception-handling  proc idb . params)
  (debug:print-info 11 "open-run-close-no-exception-handling START given a db=" (if idb "yes " "no ") ", params=" params)
  (let* ((db   (if idb 
		   (if (procedure? idb)

(define *last-global-delta-printed* 0)

(define (open-run-close-measure  proc idb . params)
  (debug:print-info 11 "open-run-close-measure START, idb=" idb ", params=" params)
  (let* ((start-ms (current-milliseconds))
	 (db       (if idb idb (open-db)))
         (throttle (string->number (config-lookup *configdat* "setup" "throttle"))))
    ;; (db:set-sync db)
    (set! res      (apply proc db params))
    (if (not idb)(sqlite3:finalize! db))
    ;; scale by 10, average with current value.
    (set! *global-delta* (/ (+ *global-delta* (* (- (current-milliseconds) start-ms)
						 (if throttle throttle 0.01)))
			    2))
    (if (> (abs (- *last-global-delta-printed* *global-delta*)) 0.08) ;; don't print all the time, only if it changes a bit

	;; (test-name sqlitespeed) (runscript runscript.rb) (db-host localhost) (run-id 1))
	(let* ((testpath  (assoc/default 'testpath  cmdinfo))  ;; How is testpath different from work-area ??
	       (top-path  (assoc/default 'toppath   cmdinfo))
	       (work-area (assoc/default 'work-area cmdinfo))
	       (test-name (assoc/default 'test-name cmdinfo))
	       (runscript (assoc/default 'runscript cmdinfo))
	       (ezsteps   (assoc/default 'ezsteps   cmdinfo))
	       (runremote (assoc/default 'runremote cmdinfo))
	       (run-id    (assoc/default 'run-id    cmdinfo))
	       (test-id   (assoc/default 'test-id   cmdinfo))
	       (target    (assoc/default 'target    cmdinfo))
	       (itemdat   (assoc/default 'itemdat   cmdinfo))
	       (env-ovrd  (assoc/default 'env-ovrd  cmdinfo))
	       (set-vars  (assoc/default 'set-vars  cmdinfo)) ;; pre-overrides from -setvar
	       (runname   (assoc/default 'runname   cmdinfo))
	       (megatest  (assoc/default 'megatest  cmdinfo))
	       (mt-bindir-path (assoc/default 'mt-bindir-path cmdinfo))
	       (fullrunscript (if (not runscript)
                                  #f
                                  (if (substring-index "/" runscript)
                                      runscript ;; use unadultered if contains slashes
                                      (let ((fulln (conc testpath "/" runscript)))
	                                  (if (and (file-exists? fulln)
                                                   (file-execute-access? fulln))
                                              fulln
                                              runscript))))) ;; assume it is on the path
	       (rollup-status 0))

	  (debug:print 2 "Exectuing " test-name " (id: " test-id ") on " (get-host-name))
	  ;; Setup the *runremote* global var
	  (if *runremote* (debug:print 2 "ERROR: I'm not expecting *runremote* to be set at this time"))
	  (set! *runremote* runremote)
	  ;; apply pre-overrides before other variables. The pre-override vars must not
	  ;; clobbers things from the official sources such as megatest.config and runconfigs.config
	  (if (string? set-vars)
	      (let ((varpairs (string-split set-vars ",")))
		(debug:print 4 "varpairs: " varpairs)
		(map (lambda (varpair)
		       (let ((varval (string-split varpair "=")))

	  (set! work-area (car dat))
	  (set! toptest-work-area (cadr dat))
	  (debug:print-info 2 "Using work area " work-area))
	(begin
	  (set! work-area (conc test-path "/tmp_run"))
	  (create-directory work-area #t)
	  (debug:print 0 "WARNING: No disk work area specified - running in the test directory under tmp_run")))
    (set! cmdparms (base64:base64-encode 
		    (with-output-to-string
					   (lambda () ;; (list 'hosts     hosts)
					     (write (list (list 'testpath  test-path)
				     (list 'runremote *runremote*)
							  (list 'toppath   *toppath*)
							  (list 'work-area work-area)
							  (list 'test-name test-name) 
							  (list 'runscript runscript) 
							  (list 'run-id    run-id   )
							  (list 'test-id   test-id  )
							  (list 'itemdat   itemdat  )

;;======================================================================
;; Get test paths matching target, runname, testpatt, and itempatt
(if (or (args:get-arg "-test-files")(args:get-arg "-test-paths"))
    ;; if we are in a test use the MT_CMDINFO data
    (if (getenv "MT_CMDINFO")
	(let* ((startingdir (current-directory))
	       (cmdinfo   (read (open-input-string (base64:base64-decode (getenv "MT_CMDINFO")))))
	       (runremote (assoc/default 'runremote cmdinfo))
	       (testpath  (assoc/default 'testpath  cmdinfo))
	       (test-name (assoc/default 'test-name cmdinfo))
	       (runscript (assoc/default 'runscript cmdinfo))
	       (db-host   (assoc/default 'db-host   cmdinfo))
	       (run-id    (assoc/default 'run-id    cmdinfo))
	       (itemdat   (assoc/default 'itemdat   cmdinfo))
	       (db        #f)
	       (state     (args:get-arg ":state"))
	       (status    (args:get-arg ":status"))
	       (target    (args:get-arg "-target"))
	       (toppath   (assoc/default 'toppath   cmdinfo)))
	  (change-directory toppath)
	  (set! *runremote* runremote)
	  (if (not target)
	      (begin
		(debug:print 0 "ERROR: -target is required.")
		(exit 1)))
	  (if (not (setup-for-run))
	      (begin
		(debug:print 0 "Failed to setup, giving up on -test-paths or -test-files, exiting")

;;======================================================================
;; Archive tests matching target, runname, testpatt, and itempatt
(if (args:get-arg "-archive")
    ;; if we are in a test use the MT_CMDINFO data
    (if (getenv "MT_CMDINFO")
	(let* ((startingdir (current-directory))
	       (cmdinfo   (read (open-input-string (base64:base64-decode (getenv "MT_CMDINFO")))))
	       (runremote (assoc/default 'runremote cmdinfo))
	       (testpath  (assoc/default 'testpath  cmdinfo))
	       (test-name (assoc/default 'test-name cmdinfo))
	       (runscript (assoc/default 'runscript cmdinfo))
	       (db-host   (assoc/default 'db-host   cmdinfo))
	       (run-id    (assoc/default 'run-id    cmdinfo))
	       (itemdat   (assoc/default 'itemdat   cmdinfo))
	       (db        #f)
	       (state     (args:get-arg ":state"))
	       (status    (args:get-arg ":status"))
	       (target    (args:get-arg "-target")))
	  (change-directory testpath)
	  (set! *runremote* runremote)
	  (if (not target)
	      (begin
		(debug:print 0 "ERROR: -target is required.")
		(exit 1)))
	  (if (not (setup-for-run))
	      (begin
		(debug:print 0 "Failed to setup, giving up on -archive, exiting")

(if (args:get-arg "-step")
    (if (not (getenv "MT_CMDINFO"))
	(begin
	  (debug:print 0 "ERROR: MT_CMDINFO env var not set, -step must be called *inside* a megatest invoked environment!")
	  (exit 5))
	(let* ((step      (args:get-arg "-step"))
	       (cmdinfo   (read (open-input-string (base64:base64-decode (getenv "MT_CMDINFO")))))
	       (runremote (assoc/default 'runremote cmdinfo))
	       (testpath  (assoc/default 'testpath  cmdinfo))
	       (test-name (assoc/default 'test-name cmdinfo))
	       (runscript (assoc/default 'runscript cmdinfo))
	       (db-host   (assoc/default 'db-host   cmdinfo))
	       (run-id    (assoc/default 'run-id    cmdinfo))
	       (test-id   (assoc/default 'test-id   cmdinfo))
	       (itemdat   (assoc/default 'itemdat   cmdinfo))
	       (db        #f)
	       (state    (args:get-arg ":state"))
	       (status   (args:get-arg ":status"))
	       (logfile  (args:get-arg "-setlog")))
	  (change-directory testpath)
	  (set! *runremote* runremote)
	  (if (not (setup-for-run))
	      (begin
		(debug:print 0 "Failed to setup, exiting")
		(exit 1)))
	  (if (and state status)
	      (open-run-close db:teststep-set-status! db test-id step state status (args:get-arg "-m") logfile)
	      (begin

	(args:get-arg "-summarize-items"))
    (if (not (getenv "MT_CMDINFO"))
	(begin
	  (debug:print 0 "ERROR: MT_CMDINFO env var not set, commands -test-status, -runstep and -setlog must be called *inside* a megatest environment!")
	  (exit 5))
	(let* ((startingdir (current-directory))
	       (cmdinfo   (read (open-input-string (base64:base64-decode (getenv "MT_CMDINFO")))))
	       (runremote (assoc/default 'runremote cmdinfo))
	       (testpath  (assoc/default 'testpath  cmdinfo))
	       (test-name (assoc/default 'test-name cmdinfo))
	       (runscript (assoc/default 'runscript cmdinfo))
	       (db-host   (assoc/default 'db-host   cmdinfo))
	       (run-id    (assoc/default 'run-id    cmdinfo))
	       (test-id   (assoc/default 'test-id   cmdinfo))
	       (itemdat   (assoc/default 'itemdat   cmdinfo))
	       (db        #f)
	       (state     (args:get-arg ":state"))
	       (status    (args:get-arg ":status")))
	  (change-directory testpath)
	  (set! *runremote* runremote)
	  (if (not (setup-for-run))
	      (begin
		(debug:print 0 "Failed to setup, exiting")
		(exit 1)))

	  ;; can setup as client for server mode now
	  (server:client-setup)

#! /usr/bin/env bash

# set -x

# Copyright 2007-2010, Matthew Welland.
# 
#  This program is made available under the GNU GPL version 2.0 or
#  greater. See the accompanying file COPYING for details.
# 
#  This program is distributed WITHOUT ANY WARRANTY; without even the

echo PATH=$PATH
echo LD_LIBRARY_PATH=$LD_LIBRARY_PATH

if ! [[ -e $PREFIX/bin/csi ]]; then
    tar xfvz chicken-${CHICKEN_VERSION}.tar.gz
    cd chicken-${CHICKEN_VERSION}
    # make PLATFORM=linux PREFIX=$PREFIX spotless
    make PLATFORM=linux PREFIX=$PREFIX
    make PLATFORM=linux PREFIX=$PREFIX install
    cd $BUILDHOME
fi

# Some eggs are quoted since they are reserved to Bash
# for f in matchable readline apropos base64 regex-literals format "regex-case" "test" coops trace csv dot-locking posix-utils posix-extras directory-utils hostinfo tcp rpc csv-xml fmt json md5; do

#======================================================================
# Note uuid needed only for zmq 2.x series
#======================================================================

# http://download.zeromq.org/zeromq-3.2.1-rc2.tar.gz
# zpatchlev=-rc2
# http://download.zeromq.org/zeromq-2.2.0.tar.gz


if [[ -e /usr/lib/libzmq.so ]]; then
  echo "Using system installed zmq library"
  $CHICKEN_INSTALL zmq
else
ZEROMQ=zeromq-2.2.0
# ZEROMQ=zeromq-3.2.2

# wget http://www.kernel.org/pub/linux/utils/util-linux/v2.22/util-linux-2.22.tar.gz
UTIL_LINUX=2.21
# UTIL_LINUX=2.20.1
if ! [[ -e util-linux-${UTIL_LINUX}.tar.gz ]] ; then
    # wget http://www.kiatoa.com/matt/util-linux-2.20.1.tar.gz
    wget http://www.kernel.org/pub/linux/utils/util-linux/v${UTIL_LINUX}/util-linux-${UTIL_LINUX}.tar.gz

    # --disable-shared CPPFLAGS="-fPIC 
    # LDFLAGS="-L/usr/lib64 -L$PREFIX/lib" ./configure --enable-static --prefix=$PREFIX 
    make
    make install
    CSC_OPTIONS="-I$PREFIX/include -L$CSCLIBS" $CHICKEN_INSTALL $PROX zmq
    # CSC_OPTIONS="-I$PREFIX/include -L$CSCLIBS" $CHICKEN_INSTALL $PROX -deploy -prefix $DEPLOYTARG zmq
fi
fi # if zmq is in /usr/lib

cd $BUILDHOME  

## WEBKIT=WebKit-r131972
## if  ! [[ -e ${WEBKIT}.tar.bz2 ]] ; then
##    #    http://builds.nightly.webkit.org/files/trunk/src/WebKit-r131972.tar.bz2
##    wget http://builds.nightly.webkit.org/files/trunk/src/${WEBKIT}.tar.bz2