Megatest

    delete-run
    lock/unlock-run
    update-run-event_time
    mark-incomplete
    set-state-status-and-roll-up-run
    ;; STEPS
    teststep-set-status!

    delete-steps-for-test
    ;; TEST DATA
    test-data-rollup
    csv->test-data

    ;; MISC
    sync-inmem->db

                   ((update-run-event_time)        (apply db:update-run-event_time dbstruct params))
                   ((update-run-stats)             (apply db:update-run-stats dbstruct params))
                   ((set-var)                      (apply db:set-var dbstruct params))
                   ((del-var)                      (apply db:del-var dbstruct params))

                   ;; STEPS
                   ((teststep-set-status!)         (apply db:teststep-set-status! dbstruct params))
                   ((delete-steps-for-test!)        (apply db:delete-steps-for-test! dbstruct params))

                   
                   ;; TEST DATA
                   ((test-data-rollup)             (apply db:test-data-rollup dbstruct params))
                   ((csv->test-data)               (apply db:csv->test-data dbstruct params))

                   ;; MISC
                   ((sync-inmem->db)               (let ((run-id (car params)))
                                                     (db:sync-touched dbstruct run-id force-sync: #t)))

           (else (car argv))))
         (fullpath (realpath this-script)))
    fullpath))
(define *common:this-exe-fullpath* (common:get-this-exe-fullpath))
(define *common:this-exe-dir*      (pathname-directory *common:this-exe-fullpath*))
(define *common:this-exe-name*     (pathname-strip-directory *common:this-exe-fullpath*))

(define *common:logpro-exit-code->status-sym-alist*
  '( ( 0 . pass )
     ( 1 . fail )
     ( 2 . warn )
     ( 3 . check )
     ( 4 . waived )
     ( 5 . abort )
     ( 6 . skip )))

(define (common:logpro-exit-code->status-sym exit-code)
  (or (alist-ref exit-code *common:logpro-exit-code->status-sym-alist*) 'fail))

(define (common:worse-status-sym ss1 ss2)
  (let loop ((status-syms-remaining '(abort fail check skip warn waived pass)))
    (cond
     ((null? status-syms-remaining)
      'fail)
     ((eq? (car status-syms-remaining) ss1)
      ss1)
     ((eq? (car status-syms-remaining) ss2)
      ss2)
     (else
      (loop (cdr status-syms-remaining))))))

(define (common:steps-can-proceed-given-status-sym status-sym)
  (if (member status-sym '(warn waived pass))
      #t
      #f))

(define (status-sym->string status-sym)
  (case status-sym
      ((pass) "PASS")
    ((fail) "FAIL")
    ((warn) "WARN")
    ((check) "CHECK")
    ((waived) "WAIVED")
    ((abort) "ABORT")
    ((skip) "SKIP")
    (else "FAIL")))

(define (common:logpro-exit-code->test-status exit-code)
  (status-sym->string (common:logpro-exit-code->status-sym exit-code)))

(defstruct remote
  (hh-dat            (common:get-homehost)) ;; homehost record ( addr . hhflag )
  (server-url        (if *toppath* (server:check-if-running *toppath*))) ;; (server:check-if-running *toppath*) #f))
  (last-server-check 0)  ;; last time we checked to see if the server was alive
  (conndat           #f)
  (transport         *transport-type*)

                                         (iup:attribute-set! steps-matrix "BGCOLOR0:7" "149 208 252")
                                         (iup:attribute-set! steps-matrix "0:9" "rerun & continue")
					 (iup:attribute-set! steps-matrix "ALIGNMENT1" "ALEFT")
					 ;; (iup:attribute-set! steps-matrix "FIXTOTEXT" "C1")
					 (iup:attribute-set! steps-matrix "RESIZEMATRIX" "YES")
					 (let ((proc
						(lambda (testdat)
						  (dcommon:populate-steps teststeps steps-matrix))))
						  (dcommon:populate-steps teststeps steps-matrix run-id test-id))))
					   (hash-table-set! widgets "StepsMatrix" proc)
					   (proc testdat))
					 steps-matrix)
				       ;; populate the Test Data panel
				       (iup:frame
					#:title "Test Data"
					(let ((test-data

   (lambda (db)
     (sqlite3:execute 
      db
      "INSERT OR REPLACE into test_steps (test_id,stepname,state,status,event_time,comment,logfile) VALUES(?,?,?,?,?,?,?);"
      test-id teststep-name state-in status-in (current-seconds)
      (if comment comment "")
      (if logfile logfile "")))))
   



(define (db:delete-steps-for-test! dbstruct run-id test-id)
  ;; TODO: figure out why status is the key field rather than state (note:  CONSTRAINT test_steps_constraint UNIQUE (test_id,stepname,state) )
  (db:with-db
   dbstruct
   run-id
   #t
   (lambda (db)
     (sqlite3:execute 
      db
      "UPDATE test_steps set status='DELETED' where test_id=?" ;;  and run_id=? !! - run_id not in table (bummer) TODO: get run_id into schema for test_steps
      test-id))))


;; db-get-test-steps-for-run
(define (db:get-steps-for-test dbstruct run-id test-id)
  (db:with-db
   dbstruct
   run-id
   #f
   (lambda (db)

						 (hash-table-keys tests-info)))))))
     canvas-obj)))

;;======================================================================
;;  S T E P S
;;======================================================================

(define (dcommon:populate-steps teststeps steps-matrix)
  (let ((max-row       0)
	(max-col       9)
        (white         "255 255 255")
        (running-color (car (gutils:get-color-for-state-status "RUNNING" "STARTED")))
        (failcolor     (car (gutils:get-color-for-state-status "COMPLETED" "FAIL"))))
(define (dcommon:populate-steps teststeps steps-matrix run-id test-id)
  (let* ((max-row       0)
	 (max-col       9)
         (white         "255 255 255")
         
         (testinfo      (rmt:get-testinfo-state-status run-id test-id))
         (state         (db:test-get-state testinfo))
         (status        (db:test-get-status testinfo))
         (test-status-color (car (gutils:get-color-for-state-status state status)))
         (running-color (car (gutils:get-color-for-state-status "RUNNING" "STARTED")))
         (failcolor     (car (gutils:get-color-for-state-status "COMPLETED" "FAIL"))))
    (if (null? teststeps)
	(begin
          (iup:attribute-set! steps-matrix "CLEARATTRIB" "CONTENTS")
	(iup:attribute-set! steps-matrix "CLEARVALUE" "CONTENTS")
          (iup:attribute-set! steps-matrix "CLEARVALUE" "CONTENTS"))
	(let loop ((hed    (car teststeps))
		   (tal    (cdr teststeps))
		   (rownum 1)
		   (colnum 1))
	  (if (> rownum max-row)(set! max-row rownum))
	  (let* ((status  (vector-ref hed 3))
                 (val     (vector-ref hed (- colnum 1)))
                 (bgcolor (cond
                           ((member (conc status) '("" "-" "#<unspecified>"))
                            running-color)
                           
                           ((member (conc status) '("0" 0))
                            white)
                           (else test-status-color)))
                           (else failcolor)))
                          ; (else failcolor)))
		 (mtrx-rc (conc rownum ":" colnum)))
            ;;(print "BB> status=>"status"< bgcolor="bgcolor)
	    (iup:attribute-set! steps-matrix  mtrx-rc (if val (conc val) ""))
            (if (< colnum 5)
                (iup:attribute-set! steps-matrix  (conc "BGCOLOR" mtrx-rc) bgcolor))
	    (if (< colnum max-col)
		(loop hed tal rownum (+ colnum 1))

;;(rmt:get-test-info-by-id run-id test-id) -> testdat



(define (ezsteps:run-from testdat start-step-name run-one)
  ;;# TODO - recapture item variables, debug repeated step eval; regen logpro from test
  (let* ((do-update-test-state-status #f)
  (let* ((test-run-dir  ;; (filedb:get-path *fdb* 
         (test-run-dir  ;; (filedb:get-path *fdb* 
	  (db:test-get-rundir testdat)) ;; )
	 (testconfig    (read-config (conc test-run-dir "/testconfig") #f #t environ-patt: "pre-launch-env-vars"))
	 (ezstepslst    (hash-table-ref/default testconfig "ezsteps" '()))
	 (run-mutex     (make-mutex))
	 (rollup-status 0)
         (rollup-status-string #f)
         (rollup-status-sym #f)
	 (exit-info     (vector #t #t #t))
	 (test-id       (db:test-get-id testdat))
	 (run-id        (db:test-get-run_id testdat))
	 (test-name     (db:test-get-testname testdat))
	 (test-id       (db:test-get-id        testdat))
	 (run-id        (db:test-get-run_id    testdat))
	 (test-name     (db:test-get-testname  testdat))
         (orig-test-state (db:test-get-state   testdat))
         (orig-test-status (db:test-get-status testdat))
	 (kill-job      #f)) ;; for future use (on re-factoring with launch.scm code

    ;; keep trying till NFS deigns to populate test run dir on this host
    (let loop ((count 5))
      (if (common:file-exists? test-run-dir)
	  (push-directory test-run-dir)
      (if (not (common:file-exists? test-run-dir))
	  ;;(push-directory test-run-dir)
	  (if (> count 0)
	      (begin
		(debug:print 0 *default-log-port* "WARNING: ezsteps attempting to run but test run directory " test-run-dir " is not there. Waiting and trying again " count " more times")
		(sleep 3)
		(loop (- count 1))))))
    
    (debug:print-info 0 *default-log-port* "Running in directory " test-run-dir)
    (if (not (common:file-exists? ".ezsteps"))(create-directory ".ezsteps"))
    ;; if ezsteps was defined then we are sure to have at least one step but check anyway
    
     (if (not (> (length ezstepslst) 0))
    (if (not (> (length ezstepslst) 0))
	(message-window "ERROR: You can only re-run steps defined via ezsteps")
	(begin
	  (let loop ((ezstep   (car ezstepslst))
		     (tal      (cdr ezstepslst))
                     (status-sym-so-far 'pass)
		     (prevstep #f)
		     (runflag  #f)) ;; flag used to skip steps when not starting at the beginning
		     ;;(runflag  #f)
                     (saw-start-step-name #f)) ;; flag used to skip steps when not starting at the beginning
	    (if (vector-ref exit-info 1)
		(let* ((stepname  (car ezstep))  ;; do stuff to run the step
		       (stepinfo  (cadr ezstep))
		       (stepparts (string-match (regexp "^(\\{([^\\}]*)\\}\\s*|)(.*)$") stepinfo))
		       (stepparms (list-ref stepparts 2)) ;; for future use, {VAR=1,2,3}, run step for each 
		       (stepcmd   (list-ref stepparts 3))
		       (script    "") ; "#!/bin/bash\n") ;; yep, we depend on bin/bash FIXME!!!
		(let* ((stepname    (car ezstep))  ;; do stuff to run the step
                       (logpro-used (common:file-exists? (conc test-run-dir "/" stepname ".logpro")))
		       (stepinfo    (cadr ezstep))
		       (stepparts   (string-match (regexp "^(\\{([^\\}]*)\\}\\s*|)(.*)$") stepinfo))
		       (stepparms   (list-ref stepparts 2)) ;; for future use, {VAR=1,2,3}, run step for each 
		       (stepcmd     (list-ref stepparts 3))
		       (script      (conc "mt_ezstep '"test-run-dir"' '"stepname"' '"stepcmd"'")) ;; call the command using mt_ezstep
		       (logpro-used #f))

		  ;; Skip steps until hit start-step-name
                       (saw-start-step-name-next (or saw-start-step-name (equal? stepname start-step-name)))
                       (proceed-with-this-step
                        (or (not start-step-name)
		  ;;
		  (if (and start-step-name
			   (not runflag))
		      (if (equal? stepname start-step-name)
			  (set! runflag #t) ;; and continue
			  (if (not (null? tal))
			      (loop (car tal)(cdr tal) stepname #f))))

		  (debug:print 4 *default-log-port* "ezsteps:\n stepname: " stepname " stepinfo: " stepinfo " stepparts: " stepparts
			       " stepparms: " stepparms " stepcmd: " stepcmd)
                            (equal? stepname start-step-name)
                            (and saw-start-step-name (not run-one))
                            saw-start-step-name-next
                            (and start-step-name (equal? stepname start-step-name))))
                       )
                  (set! do-update-test-state-status (and proceed-with-this-step (null? tal)))
                  ;;(BB> "stepname="stepname" proceed-with-this-step="proceed-with-this-step " do-update-test-state-status="do-update-test-state-status " orig-test-state="orig-test-state" orig-test-status="orig-test-status)
                  (cond
                   ((and (not proceed-with-this-step) (null? tal))
                    'done)
                   ((not proceed-with-this-step)
                      (loop (car tal)
                            (cdr tal)
                            status-sym-so-far
                            saw-start-step-name-next))
                   (else
		    (debug:print 4 *default-log-port* "ezsteps:\n stepname: " stepname " stepinfo: " stepinfo " stepparts: " stepparts
			         " stepparms: " stepparms " stepcmd: " stepcmd)
		  
		  (if (common:file-exists? (conc stepname ".logpro"))(set! logpro-used #t))
		  
		  ;; call the command using mt_ezstep
		  (set! script (conc "mt_ezstep " stepname " " (if prevstep prevstep "-") " " stepcmd))
		  
		  (debug:print 4 *default-log-port* "script: " script)
		  (rmt:teststep-set-status! run-id test-id stepname "start" "-" #f #f)
		  ;; now launch
		  (let ((pid (process-run script)))
		    (let processloop ((i 0))
		      (let-values (((pid-val exit-status exit-code)(process-wait pid #t)))
				  (mutex-lock! run-mutex)
				  (vector-set! exit-info 0 pid)
				  (vector-set! exit-info 1 exit-status)
				  (vector-set! exit-info 2 exit-code)
				  (mutex-unlock! run-mutex)
				  (if (eq? pid-val 0)
				      (begin
					(thread-sleep! 1)
					(processloop (+ i 1))))
				  ))
		    (let ((exinfo (vector-ref exit-info 2))
			  (logfna (if logpro-used (conc stepname ".html") "")))
		      (rmt:teststep-set-status! run-id test-id stepname "end" exinfo #f logfna))
		    (if logpro-used
			(rmt:test-set-log! run-id test-id (conc stepname ".html")))
		    ;; set the test final status
		    (let* ((this-step-status (cond
					      ((and (eq? (vector-ref exit-info 2) 2) logpro-used) 'warn)
					      ((eq? (vector-ref exit-info 2) 0)                   'pass)
					      (else 'fail)))
		    (debug:print 4 *default-log-port* "script: " script)
		    (rmt:teststep-set-status! run-id test-id stepname "start" "-" #f #f)

		    ;; now launch the script
		    (let ((pid (process-run script)))
		      (let processloop ((i 0))
		        (let-values (((pid-val exit-status exit-code)(process-wait pid #t)))
			  (mutex-lock! run-mutex)
			  (vector-set! exit-info 0 pid)
			  (vector-set! exit-info 1 exit-status)
			  (vector-set! exit-info 2 exit-code)
			  (mutex-unlock! run-mutex)
			  (if (eq? pid-val 0)
			      (begin
			        (thread-sleep! 1)
			        (processloop (+ i 1))))
			  ))
		      (let ((exinfo (vector-ref exit-info 2))
			    (logfna (if logpro-used (conc stepname ".html") "")))
		        (rmt:teststep-set-status! run-id test-id stepname "end" exinfo #f logfna))
                      
		      (if logpro-used
			  (rmt:test-set-log! run-id test-id (conc stepname ".html")))
                      
		      ;; set the test final status
		      (let* ((this-step-status      (cond
                                                     (logpro-used
                                                      (common:logpro-exit-code->status-sym (vector-ref exit-info 2)))
					             ((eq? (vector-ref exit-info 2) 0)
                                                      'pass)
					             (else
			   (overall-status   (cond
					      ((eq? rollup-status 2) 'warn)
					      ((eq? rollup-status 0) 'pass)
					      (else 'fail)))
                                                      'fail)))
			   (next-status      (cond 
					      ((eq? overall-status 'pass) this-step-status)
					      ((eq? overall-status 'warn)
			     (overall-status-sym    (common:worse-status-sym this-step-status status-sym-so-far))
                             (overall-status-string (status-sym->string overall-status-sym)))
					       (if (eq? this-step-status 'fail) 'fail 'warn))
					      (else 'fail))))
		      (debug:print 4 *default-log-port* "Exit value received: " (vector-ref exit-info 2) " logpro-used: " logpro-used 
				   " this-step-status: " this-step-status " overall-status: " overall-status 
				   " next-status: " next-status " rollup-status: " rollup-status)
		        (debug:print 4 *default-log-port* "Exit value received: " (vector-ref exit-info 2) " logpro-used: " logpro-used 
				     " this-step-status: " this-step-status " overall-status: " overall-status-sym) 
		        ;;" next-status: " next-status " rollup-status: " rollup-status)
		      (case next-status
			((warn)
			 (set! rollup-status 2)
                        (set! rollup-status-string overall-status-string)
			 ;; NB// test-set-status! does rdb calls under the hood
			 (tests:test-set-status! run-id test-id "RUNNING" "WARN" 
						 (if (eq? this-step-status 'warn) "Logpro warning found" #f)
						 #f))
			((pass)
			 (tests:test-set-status! run-id test-id "RUNNING" "PASS" #f #f))
			(else ;; 'fail
			 (set! rollup-status 1) ;; force fail
			 (tests:test-set-status! run-id test-id "RUNNING" "FAIL" (conc "Failed at step " stepname) #f)
			 ))))
		  (if (and (steprun-good? logpro-used (vector-ref exit-info 2))
			   (not (null? tal)))
                        (set! rollup-status-sym overall-status-sym)
                        (tests:test-set-status! run-id test-id "RUNNING" overall-status-string #f #f)))

                    (if (and
                         (not run-one)
                         (common:steps-can-proceed-given-status-sym rollup-status-sym)
                         (not (null? tal)))
		      (if (not run-one) ;; if we got here we completed the step, if run-one is true, stop
			  (loop (car tal) (cdr tal) stepname runflag))))
                        (loop (car tal)
                              (cdr tal)
                              rollup-status-sym
                              saw-start-step-name-next)))))
		(debug:print 4 *default-log-port* "WARNING: a prior step failed, stopping at " ezstep)))
	  
	  ;; Once done with step/steps update the test record
	  ;;
	  (let* ((item-path (db:test-get-item-path testdat)) ;; (item-list->path itemdat))
		 (testinfo  (rmt:get-testinfo-state-status run-id test-id))) ;; refresh the testdat, call it iteminfo in case need prev/curr
	    ;; Am I completed?
	    (if (equal? (db:test-get-state testinfo) "RUNNING") ;; (not (equal? (db:test-get-state testinfo) "COMPLETED"))
		(let ((new-state  (if kill-job "KILLED" "COMPLETED") ;; (if (eq? (vector-ref exit-info 2) 0) ;; exited with "good" status
				  ;; "COMPLETED"
				  ;; (db:test-get-state testinfo)))   ;; else preseve the state as set within the test
				  )
		      (new-status (cond
                      (new-status rollup-status-string)
				   ((not (vector-ref exit-info 1)) "FAIL") ;; job failed to run
				   ((eq? rollup-status 0)
				    ;; if the current status is AUTO the defer to the calculated value (i.e. leave this AUTO)
				    (if (equal? (db:test-get-status testinfo) "AUTO") "AUTO" "PASS"))
				   ((eq? rollup-status 1) "FAIL")
				   ((eq? rollup-status 2)
				    ;; if the current status is AUTO the defer to the calculated value but qualify (i.e. make this AUTO-WARN)
				    (if (equal? (db:test-get-status testinfo) "AUTO") "AUTO-WARN" "WARN"))
				   (else "FAIL")))) ;; (db:test-get-status testinfo)))
                      ) ;; (db:test-get-status testinfo)))
		  (debug:print-info 2 *default-log-port* "Test NOT logged as COMPLETED, (state=" (db:test-get-state testinfo) "), updating result, rollup-status is " rollup-status)
		  (tests:test-set-status! run-id test-id 
					  new-state
					  new-status
					  (if do-update-test-state-status new-state orig-test-state)
					  (if do-update-test-state-status new-status orig-test-status)
					  (args:get-arg "-m") #f)
		  ;; need to update the top test record if PASS or FAIL and this is a subtest
		  (if (not (equal? item-path ""))
		  (if (and (not (equal? item-path "")) do-update-test-state-status)
                      (rmt:set-state-status-and-roll-up-items run-id test-name item-path new-state new-status #f))))
	    ;; for automated creation of the rollup html file this is a good place...
	    (if (not (equal? item-path ""))
	      (tests:summarize-items run-id test-id test-name #f)) ;; don't force - just update if no
	    )))
    (pop-directory)
    rollup-status))
    ;;(pop-directory)
    rollup-status-string))

(define (ezsteps:spawn-run-from testdat start-step-name run-one)
  (thread-start! 
   (make-thread
    (lambda ()
      (ezsteps:run-from testdat start-step-name run-one))
    (conc "ezstep run single step " start-step-name " run-one="run-one)))

	  ;;  )
	  (cond
	   ((equal? status "PASS") "PASS") ;; skip the message part if status is pass
	   (status (conc (configf:lookup dat "final" "exit-status") ": " (if msg msg "no message")))
	   (else #f)))
	#f)))

(define (launch:runstep ezstep run-id test-id exit-info m tal testconfig)
(define (launch:runstep ezstep run-id test-id exit-info m tal testconfig) ;;; TODO: deprecate me in favor of ezsteps.scm
  (let* ((stepname       (car ezstep))  ;; do stuff to run the step
	 (stepinfo       (cadr ezstep))
	;; (let ((info (cadr ezstep)))
	;; 		   (if (proc? info) "" info)))
	;; (stepproc       (let ((info (cadr ezstep)))
	;; 		   (if (proc? info) info #f)))
	 (stepparts      (string-match (regexp "^(\\{([^\\}\\{]*)\\}\\s*|)(.*)$") stepinfo))

	      ;; (tests:test-force-state-status! run-id test-id "REMOTEHOSTSTART" "n/a")
              (rmt:general-call 'set-test-start-time #f test-id)
	      (rmt:test-set-state-status run-id test-id "REMOTEHOSTSTART" "n/a" #f)
	      )
	     (else ;; (member (db:test-get-state test-info) '("REMOVING" "REMOTEHOSTSTART" "RUNNING" "KILLREQ"))
	      (debug:print-error 0 *default-log-port* "test state is " (db:test-get-state test-info) ", cannot proceed")
	      (exit))))
	  

          ;; cleanup prior execution's steps
          (rmt:delete-steps-for-test! run-id test-id)
          
	  (debug:print 2 *default-log-port* "Executing " test-name " (id: " test-id ") on " (get-host-name))
	  (set! keys       (rmt:get-keys))
	  ;; (runs:set-megatest-env-vars run-id inkeys: keys inkeyvals: keyvals) ;; these may be needed by the launching process
	  ;; one of these is defunct/redundant ...
	  (if (not (launch:setup force-reread: #t))
	      (begin
		(debug:print 0 *default-log-port* "Failed to setup, exiting") 

  (let* ((state     (items:check-valid-items "state" state-in))
	 (status    (items:check-valid-items "status" status-in)))
    (if (or (not state)(not status))
	(debug:print 3 *default-log-port* "WARNING: Invalid " (if status "status" "state")
		     " value \"" (if status state-in status-in) "\", update your validvalues section in megatest.config"))
    (rmt:send-receive 'teststep-set-status! run-id (list run-id test-id teststep-name state-in status-in comment logfile))))


(define (rmt:delete-steps-for-test! run-id test-id)
  (rmt:send-receive 'delete-steps-for-test! run-id (list run-id test-id)))

(define (rmt:get-steps-for-test run-id test-id)
  (rmt:send-receive 'get-steps-for-test run-id (list run-id test-id)))

(define (rmt:get-steps-info-by-id test-step-id)
  (rmt:send-receive 'get-steps-info-by-id #f (list test-step-id)))

;;======================================================================

#     but WITHOUT ANY WARRANTY; without even the implied warranty of
#     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#     GNU General Public License for more details.
# 
#     You should have received a copy of the GNU General Public License
#     along with Megatest.  If not, see <http://www.gnu.org/licenses/>.

usage="mt_ezstep stepname prevstepname command [args ...]"
usage="mt_ezstep stepname command [args ...]"

if [[ "$MT_CMDINFO" == "" ]];then
  if [[ -e megatest.sh ]];then
    source megatest.sh
  else
    echo "ERROR: $0 should be run within a megatest test environment"
    echo "Usage: $usage"
    exit
  fi
fi

# Purpose: This is for the [ezsteps] secton in your testconfig file.
#   DO NOT USE IN YOUR SCRIPTS!
#
# Call like this:
# mt_ezstep stepname prevstepname command ....
# 
if [[ "x$1" == "x" ]];then
  echo "Usage: $usage"
  exit
fi

# Since the user may not have . on the path and since we are likely to want to 
# run test scripts in the current directory add the current dir to the path
export PATH=$PATH:$PWD

testrundir=$1; shift
stepname=$1;shift
prevstepname=$1;shift


command=$*

allstatus=99
runstatus=99
logpropstatus=99

# prev_env=".ezsteps/${prevstepname}.sh"
# echo "prev_env=$prev_env"
# if [[ -e "${prev_env}" ]];then
#     source $prev_env
# fi

# source the environment from the previous step if it exists
cd $testrundir
#if [[ "$MT_CMDINFO" == "" ]];then
  if [[ -e megatest.sh ]];then
    source megatest.sh
  else
    echo "ERROR: $0 should be run within a megatest test environment"
    echo "Usage: $usage"
    exit
  fi
#fi



# if a logpro file exists then use it otherwise just run the command, nb// was using 2>&1
if [[ -e ${stepname}.logpro ]];then
   # could do:
   $command 2>&1| tee ${stepname}.log | logpro ${stepname}.logpro ${stepname}.html &> /dev/null
   logprostatus=$?
   # $command 2>&1| logpro ${stepname}.logpro ${stepname}.html &> ${stepname}.log 
   # allstatus=(${PIPESTATUS[0]} ${PIPESTATUS[1]}) 
   allstatus=(${PIPESTATUS[0]} ${PIPESTATUS[1]})
   runstatus=${allstatus[0]}
   # logprostatus=${allstatus[1]}
else
   $command &> ${stepname}.log
   eval $command 2>&1 ${stepname}.log
   runstatus=$?
   logpro ${stepname}.logpro ${stepname}.html &> /dev/null < ${stepname}.log
   logprostatus=$runstatus
   logprostatus=$?
fi

# If the test exits with non-zero, we will record FAIL even if logpro
# says it is a PASS

if [[ $runstatus -ne 0 ]]; then
   if [[ $runstatus == 0 ]]; then
    exitstatus=$runstatus
elif [[ $logprostatus -eq 0 ]]; then
    exitstatus=$logprostatus
       exitstatus=$logprostatus
elif [[ $logprostatus -eq 2 ]]; then
    exitstatus=2
   else
elif [[ $logprostatus -eq 1 ]]; then
    exitstatus=1
else 
    exitstatus=0
       exitstatus=$runstatus
   fi
else
   eval $command &> ${stepname}.log
   exitstatus=$?
fi

# $MT_MEGATEST -env2file .ezsteps/${stepname}
exit $exitstatus