Megatest

    ;; TESTS
    test-set-state-status-by-id
    delete-test-records
    delete-old-deleted-test-records
    test-set-state-status
    test-set-top-process-pid
    roll-up-pass-fail-counts
    set-state-status-and-roll-up-items
    update-pass-fail-counts
    top-test-set-per-pf-counts ;; (db:top-test-set-per-pf-counts (db:get-db *db* 5) 5 "runfirst")

    ;; RUNS
    register-run
    set-tests-state-status
    delete-run

	    ;; TESTS
	    ((test-set-state-status-by-id)     (apply db:test-set-state-status-by-id dbstruct params))
	    ((delete-test-records)             (apply db:delete-test-records dbstruct params))
	    ((delete-old-deleted-test-records) (apply db:delete-old-deleted-test-records dbstruct params))
	    ((test-set-state-status)           (apply db:test-set-state-status dbstruct params))
	    ((test-set-top-process-pid)        (apply db:test-set-top-process-pid dbstruct params))
	    ((roll-up-pass-fail-counts)        (apply db:roll-up-pass-fail-counts dbstruct params))
	    ((set-state-status-and-roll-up-items)        (apply db:set-state-status-and-roll-up-items dbstruct params))
	    ;; ((update-pass-fail-counts)         (apply db:general-call dbstruct 'update-pass-fail-counts params))
	    ((top-test-set-per-pf-counts)      (apply db:top-test-set-per-pf-counts dbstruct params))
	    ((test-set-archive-block-id)       (apply db:test-set-archive-block-id dbstruct params))

	    ;; RUNS
	    ((register-run)                 (apply db:register-run dbstruct params))
	    ((set-tests-state-status)       (apply db:set-tests-state-status dbstruct params))

      (apply iup:hbox
	     (iup:label "STATE:" #:size "30x")
	     (let* ((btns  (map (lambda (state)
				  (let ((btn (iup:button state
							 #:expand "HORIZONTAL" #:size "50x" #:font "Courier New, -10"
							 #:action (lambda (x)
								    ;; (rmt:test-set-state-status-by-id run-id test-id state #f #f)
								    (rmt:roll-up-pass-fail-counts run-id test-id #f state #f #f) ;; test-name passed in as test-id is respected
								    (rmt:set-state-status-and-roll-up-items run-id test-id #f state #f #f) ;; test-name passed in as test-id is respected
								    (db:test-set-state! testdat state)))))
				    btn))
				(map cadr *common:std-states*)))) ;; (list "COMPLETED" "NOT_STARTED" "RUNNING" "REMOTEHOSTSTART" "LAUNCHED" "KILLED" "KILLREQ"))))
	       (vector-set! *state-status* 0
			    (lambda (state color)
			      (for-each 
			       (lambda (btn)

														  (begin
														    (iup:attribute-set! wtxtbox "VALUE" c)
														    (if (not *dashboard-comment-share-slot*)
															(set! *dashboard-comment-share-slot* wtxtbox)))
														  ))))
									  (begin
									    ;; (rmt:test-set-state-status-by-id run-id test-id #f status #f)
									    (rmt:roll-up-pass-fail-counts run-id test-id #f #f status #f) ;; test-name passed in as test-id is respected
									    (rmt:set-state-status-and-roll-up-items run-id test-id #f #f status #f) ;; test-name passed in as test-id is respected
									    (db:test-set-status! testdat status))))))))
				    btn))
				(map cadr *common:std-statuses*)))) ;; (list  "PASS" "WARN" "FAIL" "CHECK" "n/a" "WAIVED" "SKIP"))))
	       (vector-set! *state-status* 1
			    (lambda (status color)
			      (for-each 
			       (lambda (btn)

                                                (car all-curr-statuses))))
                    ;; (print "Setting toplevel to: " newstate "/" newstatus)
                    (db:test-set-state-status-by-id dbstruct run-id tl-test-id newstate newstatus #f))))))
          ;;(mutex-unlock! *db-transaction-mutex*)
	  )
      tr-res)))

(define db:roll-up-pass-fail-counts db:set-state-status-and-roll-up-items)

;; call with state = #f to roll up with out accounting for state/status of this item
;;
;;    (define (db:roll-up-pass-fail-counts dbstruct run-id test-name item-path state status)
;;      (if (not (equal? item-path "")) ;; if asked to do this for a specific item then do an incremental update
;;          (let* ((dbdat         (db:get-db dbstruct run-id))
;;                 (toptestdat    (db:get-test-info dbstruct run-id test-name item-path))
;;                 (currtopstate  (db:test-get-state toptestdat))
;;                 (currtopstatus (db:test-get-status toptestdat))
;;                 (nextss        (common:apply-state-status currtopstate currtopstatus state status))
;;                 (newtopstate   (car nextss))  ;; #f or a symbol
;;                 (newtopstatus  (cdr nextss))) ;; #f or a symbol
;;            (if (not newtopstate) ;; need to calculate it
;;                
;;            ;; We rely on the toplevel to track status as state varies. I.e. preserve an ABORT
;;            
;;                 
;;    	;;	(db    (db:dbdat-get-db dbdat)))
;;    	(db:general-call dbdat 'update-pass-fail-counts (list test-name test-name test-name))
;;    	(db:top-test-set-per-pf-counts dbstruct run-id test-name))))
;;      
;;    ;;     (case (string->symbol status)
;;    ;;       ((RUNNING)  (db:general-call dbdat 'top-test-set-running (list test-name)))
;;    ;;       ((LAUNCHED) (db:general-call dbdat 'top-test-set (list "LAUNCHED" test-name)))
;;    ;;       ((ABORT INCOMPLETE) (db:general-call dbdat 'top-test-set (list status test-name))))
;;        
;;    ;;     (if (or (not state)
;;    ;; 	    (not (equal? item-path "")))
;;    ;; 	;; just do a rollup
;;    ;; 	(begin
;;    ;; 	  (db:top-test-set-per-pf-counts dbdat run-id test-name)
;;    ;; 	  #f)
;;    ;; 	(begin
;;    ;; 	  ;; NOTE: No else clause needed for this case
;;    ;; 	  (case (string->symbol status)
;;    ;; 	    ((RUNNING)  (db:general-call dbdat 'top-test-set-running (list test-name)))
;;    ;; 	    ((LAUNCHED) (db:general-call dbdat 'top-test-set (list "LAUNCHED" test-name)))
;;    ;; 	    ((ABORT INCOMPLETE) (db:general-call dbdat 'top-test-set (list status test-name))))
;;    ;; 	  #f)
;;    ;; 	)))

(define (db:get-all-state-status-counts-for-test db run-id test-name item-path)
  (sqlite3:map-row
   (lambda (state status count)
     (make-dbr:counts state: state status: status count: count))
   db
   "SELECT state,status,count(id) FROM tests WHERE run_id=? AND testname=? AND item_path != '' AND item_path !=? GROUP BY state,status;"
   run-id test-name item-path))

	  "UPDATE tests SET state='DELETED' WHERE state=?")
	'(tests:test-set-toplog   "UPDATE tests SET final_logf=? WHERE run_id=? AND testname=? AND item_path='';")
	'(update-cpuload-diskfree "UPDATE tests SET cpuload=?,diskfree=? WHERE id=?;") ;; DONE
	'(update-uname-host       "UPDATE tests SET uname=?,host=? WHERE id=?;")       ;; DONE
        '(update-test-rundat      "INSERT INTO test_rundat (test_id,update_time,cpuload,diskfree,diskusage,run_duration) VALUES (?,?,?,?,?,?);")
	'(update-test-state       "UPDATE tests SET state=? WHERE state=? AND run_id=? AND testname=? AND NOT (item_path='' AND testname IN (SELECT DISTINCT testname FROM tests WHERE testname=? AND item_path != ''));")
	'(update-test-status      "UPDATE tests SET status=? WHERE status like ? AND run_id=? AND testname=? AND NOT (item_path='' AND testname IN (SELECT DISTINCT testname FROM tests WHERE testname=? AND item_path != ''));")
	;; stuff for roll-up-pass-fail-counts
	;; stuff for set-state-status-and-roll-up-items
	'(update-pass-fail-counts "UPDATE tests 
             SET fail_count=(SELECT count(id) FROM tests WHERE testname=? AND item_path != '' AND status IN ('FAIL','CHECK','INCOMPLETE','ABORT')),
                 pass_count=(SELECT count(id) FROM tests WHERE testname=? AND item_path != '' AND status IN ('PASS','WARN','WAIVED'))
             WHERE testname=? AND item_path='' AND run_id=?;") ;; DONE  ;; BROKEN!!! NEEDS run-id
	'(top-test-set-running  "UPDATE tests SET state='RUNNING' WHERE testname=? AND item_path='' AND run_id=?;") ;; DONE   ;; BROKEN!!! NEEDS run-id

(define (db:lookup-query qry-name)
  (let ((q (alist-ref qry-name db:queries)))
    (if q (car q) #f)))

;; do not run these as part of the transaction
(define db:special-queries   '(rollup-tests-pass-fail
			       ;; db:roll-up-pass-fail-counts  ;; WHY NOT!?
			       ;; db:set-state-status-and-roll-up-items  ;; WHY NOT!?
			       login
			       immediate
			       flush
			       sync
			       set-verbosity
			       killserver
			       ))

		  (debug:print-info 2 *default-log-port* "Test NOT logged as COMPLETED, (state=" (db:test-get-state testinfo) "), updating result, rollup-status is " rollup-status)
		  (tests:test-set-status! test-id 
					  new-state
					  new-status
					  (args:get-arg "-m") #f)
		  ;; need to update the top test record if PASS or FAIL and this is a subtest
		  (if (not (equal? item-path ""))
		      (cdb:roll-up-pass-fail-counts *runremote* run-id test-name item-path new-status))))
		      (cdb:set-state-status-and-roll-up-items *runremote* run-id test-name item-path new-status))))
	    ;; for automated creation of the rollup html file this is a good place...
	    (if (not (equal? item-path ""))
		(tests:summarize-items #f run-id test-id test-name #f)) ;; don't force - just update if no
	    )))
    (pop-directory)
    rollup-status))

    (if (file-exists? cname)
	(let* ((dat  (read-config cname #f #f))
	       (csvr (db:logpro-dat->csv dat stepname))
	       (csvt (let-values (( (fmt-cell fmt-record fmt-csv) (make-format ",")))
				 (fmt-csv (map list->csv-record csvr))))
	       (status (configf:lookup dat "final" "exit-status"))
	       (msg     (configf:lookup dat "final" "message")))
          ;;(if csvt  ;; this if blocked stack dump caused by .dat file from logpro being 0-byte.  fixed by upgrading logpro
          (if csvt  ;; this if blocked stack dump caused by .dat file from logpro being 0-byte.  fixed by upgrading logpro
              (rmt:csv->test-data run-id test-id csvt)
	      (debug:print 0 *default-log-port* "ERROR: no csvdat exists for run-id: " run-id " test-id: " test-id " stepname: " stepname ", check that logpro version is 1.15 or newer"))
            ;;  (BB> "Error: run-id/test-id/stepname="run-id"/"test-id"/"stepname" => bad csvr="csvr)
            ;;  )
	  (cond
	   ((equal? status "PASS") "PASS") ;; skip the message part if status is pass
	   (status (conc (configf:lookup dat "final" "exit-status") ": " (if msg msg "no message")))
	   (else #f)))
	#f)))

  ;; (tests:test-set-status! test-id "RUNNING" "n/a" #f #f)
  ;; Since we should have a clean slate at this time there is no need to do 
  ;; any of the other stuff that tests:test-set-status! does. Let's just 
  ;; force RUNNING/n/a

  ;; (thread-sleep! 0.3)
  ;; (tests:test-force-state-status! run-id test-id "RUNNING" "n/a")
  (rmt:roll-up-pass-fail-counts run-id test-name item-path #f "RUNNING" #f) 
  (rmt:set-state-status-and-roll-up-items run-id test-name item-path #f "RUNNING" #f) 
  ;; (thread-sleep! 0.3) ;; NFS slowness has caused grief here

  ;; if there is a runscript do it first
  (if fullrunscript
      (let ((pid (process-run fullrunscript)))
	(rmt:test-set-top-process-pid run-id test-id pid)
	(let loop ((i 0))

		    (debug:print-info 1 *default-log-port* "Test exited in state=" (db:test-get-state testinfo) ", setting state/status based on exit code of " (launch:einf-exit-status exit-info) " and rollup-status of " (launch:einf-rollup-status exit-info))
		    (tests:test-set-status! run-id 
					    test-id 
					    new-state
					    new-status
					    (args:get-arg "-m") #f)
		    ;; need to update the top test record if PASS or FAIL and this is a subtest
		    ;; NO NEED TO CALL roll-up-pass-fail-counts HERE, THIS IS DONE IN roll-up-pass-fail-counts called by tests:test-set-status!
		    ;; NO NEED TO CALL set-state-status-and-roll-up-items HERE, THIS IS DONE IN set-state-status-and-roll-up-items called by tests:test-set-status!
		    ))
	      ;; for automated creation of the rollup html file this is a good place...
	      (if (not (equal? item-path ""))
		  (tests:summarize-items run-id test-id test-name #f))
	      (tests:summarize-test run-id test-id)  ;; don't force - just update if no
	      (rmt:update-run-stats run-id (rmt:get-raw-run-stats run-id)))
	    (mutex-unlock! m)

	    (debug:print-info 0 *default-log-port* "attempting to preclean directory " (db:test-get-rundir testinfo) " for test " test-name "/" item-path)
	    (runs:remove-test-directory testinfo 'remove-data-only))) ;; remove data only, do not perturb the record
      
      ;; prevent overlapping actions - set to LAUNCHED as early as possible
      ;;
      ;; the following call handles waiver propogation. cannot yet condense into roll-up-pass-fail
      (tests:test-set-status! run-id test-id "LAUNCHED" "n/a" #f #f) ;; (if launch-results launch-results "FAILED"))
      (rmt:roll-up-pass-fail-counts run-id test-name item-path #f "LAUNCHED" #f)
      (rmt:set-state-status-and-roll-up-items run-id test-name item-path #f "LAUNCHED" #f)
      ;; (pp (hash-table->alist tconfig))
      (set! diskpath (get-best-disk *configdat* tconfig))
      (if diskpath
	  (let ((dat  (create-work-area run-id run-info keyvals test-id test-path diskpath test-name itemdat)))
	    (set! work-area (car dat))
	    (set! toptest-work-area (cadr dat))
	    (debug:print-info 2 *default-log-port* "Using work area " work-area))

	;;  (rmt:general-call 'state-status-msg run-id newstate newstatus newcomment test-id))
	;; ((and newstate newstatus)
	;;  (rmt:general-call 'state-status run-id newstate newstatus test-id))
	;; (else
	;;  (if newstate   (rmt:general-call 'set-test-state   run-id newstate   test-id))
	;;  (if newstatus  (rmt:general-call 'set-test-status  run-id newstatus  test-id))
	;;  (if newcomment (rmt:general-call 'set-test-comment run-id newcomment test-id))))
	(rmt:roll-up-pass-fail-counts run-id test-id #f newstate newstatus newcomment)
	(rmt:set-state-status-and-roll-up-items run-id test-id #f newstate newstatus newcomment)
	;; (mt:process-triggers run-id test-id newstate newstatus)
	#t)))

(define (mt:test-set-state-status-by-testname run-id test-name item-path new-state new-status new-comment)
  (let ((test-id (rmt:get-test-id run-id test-name item-path)))
    (rmt:roll-up-pass-fail-counts run-id test-name item-path new-state new-status new-comment)
    (rmt:set-state-status-and-roll-up-items run-id test-name item-path new-state new-status new-comment)
    ;; (mt:process-triggers run-id test-id new-state new-status)
    #t))
	;;(mt:test-set-state-status-by-id run-id test-id new-state new-status new-comment)))

(define (mt:lazy-read-test-config test-name)
  (let ((tconf (hash-table-ref/default *testconfigs* test-name #f)))
    (if tconf

  (rmt:send-receive 'get-count-tests-running-for-testname run-id (list run-id testname)))

(define (rmt:get-count-tests-running-in-jobgroup run-id jobgroup)
  (rmt:send-receive 'get-count-tests-running-in-jobgroup run-id (list run-id jobgroup)))

;; state and status are extra hints not usually used in the calculation
;;
(define (rmt:roll-up-pass-fail-counts run-id test-name item-path state status comment)
  (rmt:send-receive 'roll-up-pass-fail-counts run-id (list run-id test-name item-path state status comment)))
(define (rmt:set-state-status-and-roll-up-items run-id test-name item-path state status comment)
  (rmt:send-receive 'set-state-status-and-roll-up-items run-id (list run-id test-name item-path state status comment)))

(define (rmt:update-pass-fail-counts run-id test-name)
  (rmt:general-call 'update-pass-fail-counts run-id test-name test-name test-name))

(define (rmt:top-test-set-per-pf-counts run-id test-name)
  (rmt:send-receive 'top-test-set-per-pf-counts run-id (list run-id test-name)))

		     (else
		      (if (runs:lownoise (conc "FAILED prerequitests and we tried" hed) 60)
			  (debug:print 0 *default-log-port* "WARNING: test " hed " has FAILED prerequitests and we've tried at least 10 times to run it. Giving up now."))
		      ;; (debug:print 0 *default-log-port* "         prereqs: " prereqs-not-met)
		      (hash-table-set! test-registry hed 'removed)
		      (mt:test-set-state-status-by-testname run-id test-name item-path "NOT_STARTED" "TEN_STRIKES" #f)
		      ;; I'm unclear on if this roll up is needed - it may be the root cause of the "all set to FAIL" bug.
		      (rmt:roll-up-pass-fail-counts run-id test-name item-path #f "FAIL" #f) ;; treat as FAIL
		      (rmt:set-state-status-and-roll-up-items run-id test-name item-path #f "FAIL" #f) ;; treat as FAIL
		      (list (if (null? tal)(car newtal)(car tal))
			    tal
			    reg
			    reruns)))))
	      ;; can't drop this - maybe running? Just keep trying
	      (let ((runable-tests (runs:runable-tests prereqs-not-met)))
		(if (null? runable-tests)

			   type     )))
	    ;; This was run remote, don't think that makes sense. Perhaps not, but that is the easiest path for the moment.
	    (rmt:csv->test-data run-id test-id
				dat))))
      
    ;; need to update the top test record if PASS or FAIL and this is a subtest
    (if (not (equal? item-path ""))
	(rmt:roll-up-pass-fail-counts run-id test-name item-path state status #f))
	(rmt:set-state-status-and-roll-up-items run-id test-name item-path state status #f))

    (if (or (and (string? comment)
		 (string-match (regexp "\\S+") comment))
	    waived)
	(let ((cmt  (if waived waived comment)))
	  (rmt:general-call 'set-test-comment run-id cmt test-id)))))

	    force)
	(let ((my-start-time (current-seconds))
	      (lockf         (conc outputfilename ".lock")))
	  (let loop ((have-lock  (common:simple-file-lock lockf)))
	    (if have-lock
		(let ((script (configf:lookup *configdat* "testrollup" test-name)))
		  (print "Obtained lock for " outputfilename)
		  (rmt:roll-up-pass-fail-counts run-id test-name "" #f #f #f)
		  (rmt:set-state-status-and-roll-up-items run-id test-name "" #f #f #f)
		  (if script
		      (system (conc script " > " outputfilename " & "))
		      (tests:generate-html-summary-for-iterated-test run-id test-id test-name outputfilename))
		  (common:simple-file-release-lock lockf)
		  (change-directory orig-dir)
		  ;; NB// tests:test-set-toplog! is remote internal...
		  (tests:test-set-toplog! run-id test-name outputfilename))