Megatest

	 (run-ids      (db:get-run-ids db))) ;; iterate over runs to divy up the calls
    (if (number? ovr-deadtime)(set! deadtime ovr-deadtime))
    (for-each
     (lambda (run-id)

       ;; in RUNNING or REMOTEHOSTSTART for more than 10 minutes
       ;;
       ;; THIS CANNOT WORK. The run_duration is not updated in the central db due to performance concerns.
       ;;                   The testdat.db file must be consulted.
       ;;
       (sqlite3:for-each-row 
	(lambda (test-id)
	  (set! incompleted (cons test-id incompleted)))
	db
	"SELECT id FROM tests WHERE run_id=? AND (strftime('%s','now') - event_time - run_duration) > ? AND state IN ('RUNNING','REMOTEHOSTSTART');"
	run-id deadtime)

    res))

;; this one is a bit broken BUG FIXME
(define (db:delete-test-step-records db test-id #!key (work-area #f))
  ;; Breaking it into two queries for better file access interleaving
  (let* ((tdb (db:open-test-db-by-test-id db test-id work-area: work-area)))
    ;; test db's can go away - must check every time
    (if tdb
    (if (sqlite3:database? tdb)
	(begin
	  (sqlite3:execute tdb "DELETE FROM test_steps;")
	  (sqlite3:execute tdb "DELETE FROM test_data;")
	  (sqlite3:finalize! tdb)))))

;; 
(define (db:delete-test-records db tdb test-id #!key (force #f))

;;======================================================================
;; T E S T   D A T A 
;;======================================================================

(define (db:csv->test-data db test-id csvdata #!key (work-area #f))
  (debug:print 4 "test-id " test-id ", csvdata: " csvdata)
  (let ((tdb     (db:open-test-db-by-test-id db test-id work-area: work-area)))
    (if tdb
    (if (sqlite3:database? tdb)
	(let ((csvlist (csv->list (make-csv-reader
				   (open-input-string csvdata)
				   '((strip-leading-whitespace? #t)
				     (strip-trailing-whitespace? #t)) )))) ;; (csv->list csvdata)))
	  (for-each 
	   (lambda (csvrow)
	     (let* ((padded-row  (take (append csvrow (list #f #f #f #f #f #f #f #f #f)) 9))

				test-id category variable value expected tol units (if comment comment "") status type)))
	   csvlist)
	  (sqlite3:finalize! tdb)))))

;; get a list of test_data records matching categorypatt
(define (db:read-test-data db test-id categorypatt #!key (work-area #f))
  (let ((tdb  (db:open-test-db-by-test-id db test-id work-area: work-area)))
    (if tdb
    (if (sqlite3:database? tdb)
	(let ((res '()))
	  (sqlite3:for-each-row 
	   (lambda (id test_id category variable value expected tol units comment status type)
	     (set! res (cons (vector id test_id category variable value expected tol units comment status type) res)))
	   tdb
	   "SELECT id,test_id,category,variable,value,expected,tol,units,comment,status,type FROM test_data WHERE test_id=? AND category LIKE ? ORDER BY category,variable;" test-id categorypatt)
	  (sqlite3:finalize! tdb)

;; look at the test_data status field, 
;;    if all are pass (any case) and the test status is PASS or NULL or '' then set test status to PASS.
;;    if one or more are fail (any case) then set test status to PASS, non "pass" or "fail" are ignored
(define (db:test-data-rollup db test-id status #!key (work-area #f))
  (let ((tdb (db:open-test-db-by-test-id db test-id work-area: work-area))
	(fail-count 0)
	(pass-count 0))
    (if tdb
    (if (sqlite3:database? tdb)
	(begin
	  (sqlite3:for-each-row
	   (lambda (fcount pcount)
	     (set! fail-count fcount)
	     (set! pass-count pcount))
	   tdb 
	   "SELECT (SELECT count(id) FROM test_data WHERE test_id=? AND status like 'fail') AS fail_count,

(define (db:step-get-time-as-string vec)
  (seconds->time-string (db:step-get-event_time vec)))

;; db-get-test-steps-for-run
(define (db:get-steps-for-test db test-id #!key (work-area #f))
  (let* ((tdb (db:open-test-db-by-test-id db test-id work-area: work-area))
	 (res '()))
    (if tdb
    (if (sqlite3:database? tdb)
	(handle-exceptions
	 exn
	 (debug:print 0 "ERROR: error on access to testdat for test with id " test-id)
	 '()
	 (sqlite3:for-each-row 
	  (lambda (id test-id stepname state status event-time logfile)
	    (set! res (cons (vector id test-id stepname state status event-time (if (string? logfile) logfile "")) res)))

	     ;; (if (not ever-seen)(set! result (cons waitontest-name result)))))
	     (if (not ever-seen)
		 (set! result (append (if (null? tests)(list waitontest-name) tests) result)))))
	 waitons)
	(delete-duplicates result))))

(define (db:teststep-set-status! db test-id teststep-name state-in status-in comment logfile #!key (work-area #f))
  (debug:print 4 "test-id: " test-id " teststep-name: " teststep-name)
  ;;                 db:open-test-db-by-test-id does cdb:remote-run
  (let* ((tdb       (db:open-test-db-by-test-id db test-id work-area: work-area))
	 (state     (items:check-valid-items "state" state-in))
	 (status    (items:check-valid-items "status" status-in)))
    (if (or (not state)(not status))
	(debug:print 3 "WARNING: Invalid " (if status "status" "state")
		     " value \"" (if status state-in status-in) "\", update your validvalues section in megatest.config"))
    (if tdb
    (if (sqlite3:database? tdb)
	(begin
	  (sqlite3:execute 
	   tdb
	   "INSERT OR REPLACE into test_steps (test_id,stepname,state,status,event_time,comment,logfile) VALUES(?,?,?,?,?,?,?);"
	   test-id teststep-name state-in status-in (current-seconds) (if comment comment "") (if logfile logfile ""))
	  (sqlite3:finalize! tdb)
	  #t)

	 (deferred          '()) ;; delay running these since they have a waiton clause
	 (runconfigf         (conc  *toppath* "/runconfigs.config"))
	 (required-tests    '())
	 (test-records       (make-hash-table))
	 (all-tests-registry (tests:get-all)) ;; (tests:get-valid-tests (make-hash-table) test-search-path)) ;; all valid tests to check waiton names
	 (all-test-names     (hash-table-keys all-tests-registry))
	 (test-names         (tests:filter-test-names all-test-names test-patts)))

    ;; Update the synchronous setting in the db based on the default or what is set by the user
    ;; This is done once here on a call to run tests rather than on every call to open-db
    (cdb:remote-run db:set-sync #f)

    (set-megatest-env-vars run-id inkeys: keys) ;; these may be needed by the launching process
    (if (file-exists? runconfigf)
	(setup-env-defaults runconfigf run-id *already-seen-runconfig-info* keyvals "pre-launch-env-vars")
	(debug:print 0 "WARNING: You do not have a run config file: " runconfigf))
    

    ;; Update central with uname and hostname = #f
    ;; Is this one of the performance problems? This info should come from testdat-meta anyway
    ;; (tests:update-central-meta-info test-id cpuload diskfree minutes #f #f)
  ))
	 
(define (tests:update-testdat-meta-info db test-id work-area cpuload diskfree minutes)
  (let ((tdb         (db:open-test-db-by-test-id db test-id work-area: work-area)))
    (if tdb
    (if (sqlite3:database? tdb)
	(begin
	  (sqlite3:execute tdb "INSERT INTO test_rundat (update_time,cpuload,diskfree,run_duration) VALUES (strftime('%s','now'),?,?,?);"
			   cpuload diskfree minutes)
	  (sqlite3:finalize! tdb))
	(debug:print 2 "Can't update testdat.db for test " test-id " read-only or non-existant"))))
    
(define (tests:testdat-get-testinfo db test-id work-area)
   (let ((tdb         (db:open-test-db-by-test-id db test-id work-area: work-area))
	 (res         '()))
     (if tdb
     (if (sqlite3:database? tdb)
	 (sqlite3:for-each-row
	  (lambda (update-time cpuload diskfree run-duration)
	    (set! res (cons (vector update-time cpuload diskfree run-duration) res)))
	  tdb
	  "SELECT update_time,cpuload,diskfree,run_duration FROM test_rundat ORDER BY update_time ASC;")
	 (sqlite3:finalize! tdb))
     res))

[setup]
testcopycmd cp --remove-destination -rlv TEST_SRC_PATH/. TEST_TARG_PATH/. >> TEST_TARG_PATH/mt_launch.log 2>> TEST_TARG_PATH/mt_launch.log
runqueue 20
transport http
# transport http
launchwait no

[include ../fdk.config]

[server]
port 9080

[setup]
# Set launchwait to no to use the more agressive code that does not wait for the launch to complete before proceeding
# this may save a few milliseconds on launching tests
# launchwait no

# Use http instead of direct filesystem access
# transport http
transport fs
transport http
# transport fs

# If set to "default" the old code is used. Otherwise defaults to 200 or uses
# numeric value given.
#
runqueue 20

# Default runtimelim 1d 1h 1m 10s