Megatest

    (8 "RUNNING")
    ))

(define *common:std-statuses*
  '(;; (0 "DELETED")
    (1 "n/a")
    (2 "PASS")

    (3 "SKIP")
    (4 "WARN")
    (5 "WAIVED")
    (6 "CHECK")
    (7 "STUCK/DEAD")
    (8 "FAIL")
    (9 "ABORT")))

(define *common:ended-states*       ;; states which indicate the test is stopped and will not proceed
  '("COMPLETED" "ARCHIVED" "KILLED" "KILLREQ" "STUCK" "INCOMPLETE"))

(define (common:args-get-testpatt rconf)
  (let* (;; (tagexpr       (args:get-arg "-tagexpr"))
         ;; (tags-testpatt (if tagexpr (string-join (runs:get-tests-matching-tags tagexpr) ",") #f))
         (testpatt-key  (if (args:get-arg "--modepatt") (args:get-arg "--modepatt") "TESTPATT"))
         (args-testpatt (or (args:get-arg "-testpatt") (args:get-arg "-runtests") "%"))
         (rtestpatt     (if rconf (runconfigs-get rconf testpatt-key) #f)))
    (cond
     ((args:get-arg "--modepatt") ;; modepatt is a forced setting, when set it MUST refer to an existing PATT in the runconfig
      (if rconf
	  (runconfigs-get rconf testpatt-key)
	  #f))     ;; We do NOT fall back to "%"
     ;; (tags-testpatt
     ;;  (debug:print-info 0 *default-log-port* "-tagexpr "tagexpr" selects testpatt "tags-testpatt)
     ;;  tags-testpatt)
     ((and (equal? args-testpatt "%") rtestpatt)
      (debug:print-info 0 *default-log-port* "testpatt defined in "testpatt-key" from runconfigs: " rtestpatt)
      rtestpatt)
     (else args-testpatt))))

(define (common:directory-exists? path-string)
  ;;;; TODO: catch permission denied exceptions and emit appropriate warnings, eg:  system error while trying to access file: "/nfs/pdx/disks/icf_env_disk001/bjbarcla/gwa/issues/mtdev/randy-slow/reproduce/q...
  (common:false-on-exception (lambda () (directory-exists? path-string))
                             message: (conc "Unable to access path: " path-string)
                             ))

;; does the directory exist and do we have write access?
;;
;;    returns the directory or #f
;;
(define (common:directory-writable? path-string)
  (handle-exceptions
   exn
   #f
   (if (and (directory-exists? path-string)
            (file-write-access? path-string))
       path-string
       #f)))

(define (common:get-linktree)
  (or (getenv "MT_LINKTREE")
      (or (and *configdat*
	       (configf:lookup *configdat* "setup" "linktree"))
	  (if *toppath*
	      (conc *toppath* "/lt")

	    target)
	(if target
	    (begin
	      (debug:print-error 0 *default-log-port* "Invalid target, spaces or blanks not allowed \"" target "\", target should be: " (string-intersperse keys "/") ", have " tlist " for elements")
	      (if exit-if-bad (exit 1))
	      #f)
	    #f))))

;; looking only (at least for now) at the MT_ variables craft the full testname
;;
(define (common:get-full-test-name)
  (if (getenv "MT_TEST_NAME")
      (if (and (getenv "MT_ITEMPATH")
               (not (equal? (getenv "MT_ITEMPATH") "")))
          (getenv "MT_TEST_NAME")
          (conc (getenv "MT_TEST_NAME") "/" (getenv "MT_ITEMPATH")))
      #f))

;; logic for getting homehost. Returns (host . at-home)
;; IF *toppath* is not set, wait up to five seconds trying every two seconds
;; (this is to accomodate the watchdog)
;;
(define (common:get-homehost #!key (trynum 5))
  ;; called often especially at start up. use mutex to eliminate collisions

    (if hh
	(cdr hh)
	#f)))

;; do we honor the caches of the config files?
;;
(define (common:use-cache?)
  (let ((res #t)) ;; priority by order of evaluation
    (if *configdat*
	(if (equal? (configf:lookup *configdat* "setup" "use-cache") "no")
	    (set! res #f)
	    (if (equal? (configf:lookup *configdat* "setup" "use-cache") "yes")
		(set! res #t))))
    (if (args:get-arg "-no-cache")(set! res #f)) ;; overrides setting in "setup"
    (if (getenv "MT_USE_CACHE")
	(if (equal? (getenv "MT_USE_CACHE") "yes")
	    (set! res #t)
	    (if (equal? (getenv "MT_USE_CACHE") "no")
		(set! res #f))))    ;; overrides -no-cache switch
    res))
  
;; force use of server?
;;
(define (common:force-server?)
  (let* ((force-setting (configf:lookup *configdat* "server" "force"))
	 (force-type    (if force-setting (string->symbol force-setting) #f))
	 (force-result  (case force-type
			  ((#f)     #f)
			  ((always) #t)
			  ((test)   (if (args:get-arg "-execute") ;; we are in a test
					#t
					#f))
			  (else
			   (debug:print 0 *default-log-port* "ERROR: Bad server force setting " force-setting ", forcing server.")
			   #t)))) ;; default to requiring server
    (if force-result
	(begin
	  (debug:print-info 0 *default-log-port* "forcing use of server, force setting is \"" force-setting "\".")
	  #t)
	#f)))








;;======================================================================
;; M I S C   L I S T S
;;======================================================================

;; items in lista are matched value and position in listb
;; return the remaining items in listb or #f
;;

								 (proc (cdr dat)))
							     (if (string-match patt curr-section-name)
								 (proc curr-section-name section-name res path))))
							 post-section-procs)
                                                        ;; after gathering the vars for a section and if apply-wildcards is true and if there is a wildcard in the section name process wildcards
                                                        ;; NOTE: we are processing the curr-section-name, NOT section-name.
                                                        (process-wildcards res curr-section-name)
							(if (not (hash-table-ref/default res section-name #f))(hash-table-set! res section-name '())) ;; ensure that mere mention of a section is not lost
							(loop (configf:read-line inp res (calc-allow-system allow-system curr-section-name sections) settings)
							      ;; if we have the sections list then force all settings into "" and delete it later?
							      ;; (if (or (not sections) 
							      ;;	      (member section-name sections))
							      ;;	  section-name "") ;; stick everything into "". NOPE: We need new strategy. Put stuff in correct sections and then delete all sections later.
							      section-name
							      #f #f)))

  ;; runs
  ((allruns         '())                 : list)        ;; list of dboard:rundat records
  ((allruns-by-id    (make-hash-table))  : hash-table)  ;; hash of run-id -> dboard:rundat records
  ((done-runs       '())                 : list)        ;; list of runs already drawn
  ((not-done-runs   '())                 : list)        ;; list of runs not yet drawn
  (header            #f)                                ;; header for decoding the run records
  (keys              #f)                                ;; keys for this run (i.e. target components)
  ((numruns          (string->number (or (args:get-arg "-cols")
					 (configf:lookup *configdat* "dashboard" "cols")
					 "8")))                 : number)      ;; 
  ((tot-runs          0)                 : number)
  ((last-data-update  0)                 : number)      ;; last time the data in allruns was updated
  ((last-runs-update  0)                 : number)      ;; last time we pulled the runs info to update the tree
  (runs-mutex         (make-mutex))                     ;; use to prevent parallel access to draw objects
  ((run-update-times  (make-hash-table)) : hash-table)  ;; update times indexed by run-id
  ((last-test-dat      (make-hash-table)) : hash-table)  ;; cache last tests dat by run-id
  ((run-db-paths      (make-hash-table)) : hash-table)  ;; cache the paths to the run db files

  ;; Runs view
  ((buttondat         (make-hash-table)) : hash-table)  ;;     
  ((item-test-names  '())                : list)        ;; list of itemized tests
  ((run-keys          (make-hash-table)) : hash-table)
  (runs-matrix        #f)                               ;; used in newdashboard
  ((start-run-offset   0)                : number)      ;; left-right slider value
  ((start-test-offset  0)                : number)      ;; up-down slider value
  ((runs-btn-height    (or (configf:lookup *configdat* "dashboard" "btn-height") "x16")) : string)  ;; was 12
  ((runs-btn-fontsz    (or (configf:lookup *configdat* "dashboard" "btn-fontsz") "10")) : string)   ;; was 8
  ((runs-cell-width    (or (configf:lookup *configdat* "dashboard" "cell-width") "50")) : string)   ;; was 50
  ((all-test-names     '())              : list)
  
  ;; Canvas and drawing data
  (cnv                #f)
  (cnv-obj            #f)
  (drawing            #f)
  ((run-start-row     0)                 : number)

			    "190 190 190"
			    ))
    (dboard:tabdat-filters-changed-set! tabdat #t)))

(define (update-search commondat tabdat x val)
  (hash-table-set! (dboard:tabdat-searchpatts tabdat) x val)
  (dboard:tabdat-filters-changed-set! tabdat #t)
  (mark-for-update tabdat)
  (set-bg-on-filter commondat tabdat))

;; force ALL updates to zero (effectively)
;;
(define (mark-for-update tabdat)
  (dboard:tabdat-last-db-update-set! tabdat (make-hash-table)))

	     ;;        #:value 300

	     ;; Target, testpatt, state and status input boxes
	     ;;
	     (iup:vbox
	      ;; Command to run, placed over the top of the canvas
	      (dcommon:command-action-selector commondat tabdat tab-num: tab-num)
              (dboard:runs-tree-browser commondat tabdat)
	      (dcommon:command-runname-selector commondat tabdat tab-num: tab-num)
	      (dcommon:command-testname-selector commondat tabdat update-keyvals))
	     ;;  key-listboxes))
	     (dcommon:command-tests-tasks-canvas tabdat test-records sorted-testnames tests-draw-state))))
	   (tb (dboard:tabdat-runs-tree tabdat)))
      (dboard:commondat-add-updater 
       commondat 
       (lambda ()
         (if (dashboard:database-changed? commondat tabdat context-key: 'run-control)
             (dashboard:update-tree-selector tabdat)))
       tab-num: tab-num)
      result)))

 ;;(iup:frame
 ;; #:title "Logs" ;; To be replaced with tabs
 ;; (let ((logs-tb (iup:textbox #:expand "YES"
 ;;				   #:multiline "YES")))
 ;;	 (dboard:tabdat-logs-textbox-set! tabdat logs-tb)
 ;;	 logs-tb))

;; browse runs as a tree. Used in both "Runs" tab and
;; in the runs control panel.
;;
(define (dboard:runs-tree-browser commondat tabdat)
  (let* (
	 (txtbox (iup:textbox #:action (lambda (val a b)
					 (debug:catch-and-dump
					  (lambda ()
					    ;; for the Runs view we put the list of keyvals into tabdat target
					    ;; for the Run Controls we put then update the run-command
					    (if b (dboard:tabdat-target-set! tabdat (string-split b "/")))
					    (dashboard:update-run-command tabdat))
					  "command-testname-selector tb action"))
			      #:value (dboard:test-patt->lines
				       (dboard:tabdat-test-patts-use tabdat))
			      #:expand "HORIZONTAL"
			      ;; #:size "10x30"
			      ))
	 (tb
          (iup:treebox
           #:value 0
           #:name "Runs"
           #:expand "YES"
           #:addexpanded "YES"
           #:size "10x"
           #:selection-cb
           (lambda (obj id state)
             (debug:catch-and-dump
              (lambda ()
                (let* ((run-path (tree:node->path obj id))
                       (run-id    (tree-path->run-id tabdat (cdr run-path))))

                        (dboard:tabdat-curr-run-id-set! tabdat run-id)
                        (dboard:tabdat-view-changed-set! tabdat #t))
                      (debug:print-error 5 *default-log-port* "tree-path->run-id returned non-number " run-id))))
              "treebox"))
           ;; (print "path: " (tree:node->path obj id) " run-id: " run-id)
           )))
    (dboard:tabdat-runs-tree-set! tabdat tb)
    (iup:detachbox
     (iup:vbox 
      tb
      txtbox))))

;;======================================================================
;; R U N   C O N T R O L S
;;======================================================================
;;
;; A gui for launching tests
;;

      (dcommon:command-runname-selector commondat tabdat tab-num: tab-num)
      (dcommon:command-testname-selector commondat tabdat update-keyvals))
     (iup:vbox
      (iup:split
       #:orientation "HORIZONTAL"
       #:value 800
      (let* ((cnv-obj (iup:canvas 
		       ;; #:size "250x250" ;; "500x400"
		       #:expand "YES"
		       #:scrollbar "YES"
		       #:posx "0.5"
		       #:posy "0.5"
		       #:action (make-canvas-action
				  (lambda (c xadj yadj)
				    (debug:catch-and-dump

		       )))
	cnv-obj)
      (let* ((hb1 (iup:hbox))
             (graph-cell-table (dboard:tabdat-graph-cell-table tabdat))
             (changed #f)
             (graph-matrix (iup:matrix
                           #:alignment1 "ALEFT"
                           ;; #:expand "YES" ;; "HORIZONTAL"
                           #:scrollbar "YES"
                           #:numcol 10
                           #:numlin 20
                           #:numcol-visible 5 ;; (min 8)
                           #:numlin-visible 1
                           #:click-cb
                           (lambda (obj row col status)
                             (let*
                                 ((graph-cell (conc row ":" col))
                                 (graph-dat   (hash-table-ref/default graph-cell-table graph-cell #f))
                                 (graph-flag  (dboard:graph-dat-flag graph-dat)))

;;
;; General info about the run(s) and megatest area
(define (dashboard:summary commondat tabdat #!key (tab-num #f))
  (let* ((rawconfig        (read-config (conc *toppath* "/megatest.config") #f #f)) ;; changed to #f since I want #{} to be expanded by [system ...] to NOT be expanded. WAS: 'return-string)))
	 (changed          #f))
    (iup:vbox
     (iup:split
      #:value 300
      (iup:frame 
       #:title "General Info"
       (iup:vbox
	(iup:hbox
	 (iup:label "Area Path")
	 (iup:textbox #:value *toppath* #:expand "HORIZONTAL"))
	(iup:hbox 

;; 
(define (dashboard:runs-summary commondat tabdat #!key (tab-num #f))
  (let* ((update-mutex (dboard:commondat-update-mutex commondat))
	 (tb      (iup:treebox
		   #:value 0
		   #:name "Runs"
		   #:expand "YES"
		   #:addexpanded "YES"
		   #:selection-cb
		   (lambda (obj id state)
		     (debug:catch-and-dump
		      (lambda ()
			;; (print "obj: " obj ", id: " id ", state: " state)
			(let* ((run-path (tree:node->path obj id))
			       (run-id   (tree-path->run-id tabdat (cdr run-path))))

      run-matrix)
     (dboard:make-controls commondat tabdat extra-widget: runs-summary-control-panel))))

;;======================================================================
;; R U N S 
;;======================================================================

(define (dboard:squarify toggles size)
  (let loop ((hed (car toggles))
	     (tal (cdr toggles))
	     (cur '())
	     (res '()))
    (let* ((ovrflo (>= (length cur) size))
	   (newcur (if ovrflo
		       (list hed)
		       (cons hed cur)))
	   (newres (if ovrflo
		       (cons cur res)
		       res)))
      (if (null? tal)
	  (if ovrflo
	      newres
	      (cons newcur res))
	  (loop (car tal)(cdr tal) newcur newres)))))

(define (dboard:make-controls commondat tabdat #!key (extra-widget #f) )
  (let ((btn-fontsz  (dboard:tabdat-runs-btn-fontsz tabdat)))
    (iup:hbox
     (iup:vbox
      (iup:frame 
       #:title "filter test and items"
       (iup:vbox

					 #:action (lambda (obj val index lbstate)
						    (set! *tests-sort-reverse* index)
						    (mark-for-update tabdat))))
		(default-cmd (car (list-ref *tests-sort-type-index* *tests-sort-reverse*))))
                
	   (iuplistbox-fill-list sort-lb cmds-list selected-item: default-cmd)
	   
	   ;; (set! hide-empty (iup:button "HideEmpty"
	   ;; 				;; #:expand HORIZONTAL"
	   ;; 				#:expand "NO" #:size "80x15"
	   ;; 				#:action (lambda (obj)
	   ;; 					   (dboard:tabdat-hide-empty-runs-set! tabdat (not (dboard:tabdat-hide-empty-runs tabdat)))
	   ;; 					   (iup:attribute-set! obj "TITLE" (if (dboard:tabdat-hide-empty-runs tabdat) "+HideE" "-HideE"))
	   ;; 					   (mark-for-update tabdat))))
	   (set! hide (iup:button "Hide"
				  #:expand "NO" #:size "40x15" ;; #:expand "HORIZONTAL"
				  #:action (lambda (obj)
					     (dboard:tabdat-hide-not-hide-set! tabdat #t) ;; (not (dboard:tabdat-hide-not-hide tabdat)))
					     ;; (iup:attribute-set! obj "TITLE" (if (dboard:tabdat-hide-not-hide tabdat) "HideTests" "NotHide"))
					     (iup:attribute-set! hide "BGCOLOR" sel-color)
					     (iup:attribute-set! show "BGCOLOR" nonsel-color)

            (iup:hbox)) ;; empty widget

        

        
        )))






     (let* ((status-toggles (map (lambda (status)
				   (iup:toggle (conc status)
					       #:fontsize 8 ;; btn-fontsz ;; "10"
					       ;; #:expand "HORIZONTAL"
					       #:action   (lambda (obj val)
							    (mark-for-update tabdat)
							    (if (eq? val 1)
								(hash-table-set! (dboard:tabdat-status-ignore-hash tabdat) status #t)
								(hash-table-delete! (dboard:tabdat-status-ignore-hash tabdat) status))
							    (set-bg-on-filter commondat tabdat))))
				 (map cadr *common:std-statuses*))) ;; '("PASS" "FAIL" "WARN" "CHECK" "WAIVED" "STUCK/DEAD" "n/a" "SKIP")))


	    (state-toggles  (map (lambda (state)
				   (iup:toggle (conc state)
					       #:fontsize 8 ;; btn-fontsz
					       ;; #:expand "HORIZONTAL"
					       #:action   (lambda (obj val)
							    (mark-for-update tabdat)
							    (if (eq? val 1)
								(hash-table-set! (dboard:tabdat-state-ignore-hash tabdat) state #t)
								(hash-table-delete! (dboard:tabdat-state-ignore-hash tabdat) state))
							    (set-bg-on-filter commondat tabdat))))
				 (map cadr *common:std-states*))) ;; '("RUNNING" "COMPLETED" "INCOMPLETE" "LAUNCHED" "NOT_STARTED" "KILLED" "DELETED")))
	    (num-toggle-cols (inexact->exact (round (/ (max (length status-toggles)(length state-toggles)) 3)))))
       (iup:vbox
	(iup:hbox
	 (iup:frame
	  #:title "states"
	  (apply
	   iup:hbox
	   (map (lambda (colgrp)
		  (apply iup:vbox colgrp))
		(dboard:squarify state-toggles 3))))
	 (iup:frame
	  #:title "statuses"
	  (apply
	   iup:hbox
	   (map (lambda (colgrp)
		  (apply iup:vbox colgrp))
		(dboard:squarify status-toggles 3)))))
	;; 
	;; (iup:frame 
	;; 	#:title "state/status filter"
	;; 	(iup:vbox
	;; 	 (apply
	;; 	  iup:hbox
	;; 	  (map
	;; 	   (lambda (status-toggle state-toggle)
	;; 	     (iup:vbox
	;; 	      status-toggle
	;; 	      state-toggle))
	;; 	   status-toggles state-toggles))

	;; horizontal slider was here
	
	)))))

(define (dashboard:runs-horizontal-slider tabdat )
  (iup:valuator #:valuechanged_cb (lambda (obj)
				    (let ((val (inexact->exact (round (/ (string->number (iup:attribute obj "VALUE")) 10))))
					  (oldmax   (string->number (iup:attribute obj "MAX")))
					  (maxruns  (dboard:tabdat-tot-runs tabdat)))
				      (dboard:tabdat-start-run-offset-set! tabdat val)
				      (mark-for-update tabdat)
				      (debug:print 6 *default-log-port* "(dboard:tabdat-start-run-offset tabdat) " (dboard:tabdat-start-run-offset tabdat) " maxruns: " maxruns ", val: " val " oldmax: " oldmax)
				      (iup:attribute-set! obj "MAX" (* maxruns 10))))
		#:expand "HORIZONTAL"
		#:max (* 10 (max (hash-table-size (dboard:tabdat-allruns-by-id tabdat)) 10))
		#:min 0
		#:step 0.01))




(define (dashboard:popup-menu  run-id test-id target runname test-name testpatt item-test-path test-info)
  (iup:menu 
   (iup:menu-item
    "Test Control Panel"
    #:action
    (lambda (obj)

			(iup:label) ;; (iup:valuator)
			(apply iup:vbox 
			       (map (lambda (x)		
				      (let ((res (iup:hbox #:expand "HORIZONTAL"
							   (iup:label x #:size (conc 40 btn-height) #:fontsize btn-fontsz #:expand "NO") ;; "HORIZONTAL")
							   (iup:textbox #:size (conc 35 btn-height) #:fontsize btn-fontsz #:value "%" #:expand "NO" ;; "HORIZONTAL"
									#:action (lambda (obj unk val)
										   ;; each field (field name is "x" var) live updates
										   ;; the search filter as it is typed
										   (dboard:tabdat-target-set! runs-dat #f) ;; ensure the fields text boxes are used and not the info from the tree
										   (mark-for-update runs-dat)
										   (update-search commondat runs-dat x val))))))
					(set! i (+ i 1))
					res))
				    keynames)))))
    (let loop ((testnum  0)
	       (res      '()))

    (iup:show
     (iup:dialog 
      #:title (conc "Megatest dashboard " (current-user-name) ":" *toppath*)
      #:menu (dcommon:main-menu)
      (let* ((runs-view (iup:vbox
			 (iup:split
			  #:orientation "VERTICAL" ;; "HORIZONTAL"
			  #:value 100
			  (dboard:runs-tree-browser commondat runs-dat)
			  (iup:split
			   #:value 100
			   ;; left most block, including row names
			   (apply iup:vbox lftlst)
			   ;; right hand block, including cells
			   (iup:vbox
			    #:expand "YES"
			    ;; the header
			    (apply iup:hbox (reverse hdrlst))
			    (apply iup:hbox (reverse bdylst))
			    (dashboard:runs-horizontal-slider runs-dat))))
			 controls
			 ))
	     (views-cfgdat (common:load-views-config))
	     (additional-tabnames '())
	     (tab-start-num       5)   ;; DON'T FORGET TO UPDATE THIS WHEN CHANGING THE STANDARD TABS BELOW
	     ;; (data (dboard:tabdat-init (make-d:data)))
	     (additional-views 	;; process views-dat

					       "tabchangepos"))
			  (dashboard:summary commondat stats-dat tab-num: 0)
			  runs-view
			  (dashboard:runs-summary commondat onerun-dat tab-num: 2)
			  ;; (dashboard:new-view db data new-view-dat tab-num: 3)
			  (dashboard:run-controls commondat runcontrols-dat tab-num: 3)
			  (dashboard:run-times commondat runtimes-dat tab-num: 4)
			  ;; (dashboard:runs-summary commondat onerun-dat tab-num: 4)
			  additional-views)))
	;; (set! (iup:callback tabs tabchange-cb:) (lambda (a b c)(print "SWITCHED TO TAB: " a " " b " " c)))
	(iup:attribute-set! tabs "TABTITLE0" "Summary")
	(iup:attribute-set! tabs "TABTITLE1" "Runs")
	(iup:attribute-set! tabs "TABTITLE2" "Run Summary")
	(iup:attribute-set! tabs "TABTITLE3" "Run Control")
	(iup:attribute-set! tabs "TABTITLE4" "Run Times")

             (sqlite3:set-busy-handler! db (make-busy-timeout 136000))
             (sqlite3:execute db "PRAGMA synchronous = 0;")
             (if (not file-exists)
                 (begin
                   (if (and (configf:lookup *configdat* "setup" "use-wal")
                            (string-match "^/tmp/.*" fname)) ;; this is a file in /tmp
                       (sqlite3:execute db "PRAGMA journal_mode=WAL;")
                       (debug:print 2 *default-log-port* "Creating " fname " in NON-WAL mode."))
                   (initproc db)))
             (if (not readyexists)
                 (begin
                   (common:simple-file-release-lock lockfname)
                   (with-output-to-file
                       readyfname
                     (lambda ()

                                                   (delete-duplicates
                                                    (cons status (map dbr:counts-status state-status-counts)))
                                                   *common:std-statuses* >))
			    (non-completes     (filter (lambda (x)
							 (not (equal? x "COMPLETED")))
						       all-curr-states))
                            (newstate          (cond
						((> running 0)
						 "RUNNING") ;; anything running, call the situation running
						((> bad-not-started 0)  ;; we have an ugly situation, it is completed in the sense we cannot do more.
						 "COMPLETED") 
						((> (length non-completes) 0) ;;
						 (car non-completes))  ;;  (remove (lambda (x)(equal? "COMPLETED" x)) all-curr-states)))
						(else
						 (car all-curr-states))))
			                       ;; (if (> running 0)
                                               ;;     "RUNNING"
                                               ;;     (if (> bad-not-started 0)

;; Section to table
(define (dcommon:section-matrix rawconfig sectionname varcolname valcolname #!key (title #f))
  (let* ((curr-row-num    1)
         (key-vals        (configf:section-vars rawconfig sectionname))
         (section-matrix  (iup:matrix
                           #:alignment1 "ALEFT"
                           ;; #:expand "YES" ;; "HORIZONTAL"
                           #:numcol 1
                           #:numlin (length key-vals)
                           #:numcol-visible 1
                           #:numlin-visible (min 10 (length key-vals))
			   #:scrollbar "YES")))
    (iup:attribute-set! section-matrix "0:0" varcolname)
    (iup:attribute-set! section-matrix "0:1" valcolname)

				      (hash-table-set! tests-draw-state 'scalef (+ scalef
										   (if (> step 0)
										       (* scalef 0.01)
										       (* scalef -0.01))))
				      (if the-cnv
					  (dashboard:draw-tests the-cnv last-xadj last-yadj tests-draw-state sorted-testnames test-records))
				      ))
		       ;; #:size "250x250"
		       #:expand "YES"
		       #:scrollbar "YES"
		       #:posx "0.5"
		       #:posy "0.5"
		       #:button-cb (lambda (obj btn pressed x y status)
				     ;; (print "obj: " obj ", pressed " pressed ", status " status)
					; (print "canvas-origin: " (canvas-origin the-cnv))

	      (debug:print-error 0 *default-log-port* "test state is " (db:test-get-state test-info) ", cannot proceed")
	      (exit))))
	  
	  (debug:print 2 *default-log-port* "Exectuing " test-name " (id: " test-id ") on " (get-host-name))
	  (set! keys       (rmt:get-keys))
	  ;; (runs:set-megatest-env-vars run-id inkeys: keys inkeyvals: keyvals) ;; these may be needed by the launching process
	  ;; one of these is defunct/redundant ...
	  (if (not (launch:setup force-reread: #t))
	      (begin
		(debug:print 0 *default-log-port* "Failed to setup, exiting") 
		;; (sqlite3:finalize! db)
		;; (sqlite3:finalize! tdb)
		(exit 1)))
	  (change-directory *toppath*) 

		  (tests:summarize-items run-id test-id test-name #f))
	      (tests:summarize-test run-id test-id)  ;; don't force - just update if no
	      (rmt:update-run-stats run-id (rmt:get-raw-run-stats run-id)))
	    (mutex-unlock! m)
	    (debug:print 2 *default-log-port* "Output from running " fullrunscript ", pid " (launch:einf-pid exit-info) " in work area " 
			 work-area ":\n====\n exit code " (launch:einf-exit-code exit-info) "\n" "====\n")
	    (if (not (launch:einf-exit-status exit-info))
		(exit 4))))
        )))

(define (launch:cache-config)
  ;; if we have a linktree and -runtests and -target and the directory exists dump the config
  ;; to megatest-(current-seconds).cfg and symlink it to megatest.cfg
  (if (and *configdat* 
	   (or (args:get-arg "-run")
	       (args:get-arg "-runtests")

;;   returns:
;;     *toppath*
;;   side effects:
;;     sets; *configdat*    (megatest.config info)
;;           *runconfigdat* (runconfigs.config info)
;;           *configstatus* (status of the read data)
;;
(define (launch:setup #!key (force-reread #f) (areapath #f))
  (mutex-lock! *launch-setup-mutex*)
  (if (and *toppath*
	   (eq? *configstatus* 'fulldata) (not force-reread)) ;; got it all
      (begin
	(debug:print 2 *default-log-port* "NOTE: skipping launch:setup-body call since we have fulldata")
	(mutex-unlock! *launch-setup-mutex*)
	*toppath*)
      (let ((res (launch:setup-body force-reread: force-reread areapath: areapath)))
	(mutex-unlock! *launch-setup-mutex*)
	res)))

;; return paths depending on what info is available.
;;
(define (launch:get-cache-file-paths areapath toppath target mtconfig)
  (let* ((use-cache (common:use-cache?))
         (runname  (common:args-get-runname))
         (linktree (common:get-linktree))
         (testname (common:get-full-test-name))
         (rundir   (if (and runname target linktree)
                       (common:directory-writable? (conc linktree "/" target "/" runname))
                       #f))
         (testdir  (if (and rundir testname)
                       (common:directory-writable? (conc rundir "/" testname))
                       #f))
         (cachedir (or testdir rundir))
         (mtcachef (and cachedir (conc cachedir "/" ".megatest.cfg-"  megatest-version "-" megatest-fossil-hash)))
         (rccachef (and cachedir (conc cachedir "/" ".runconfigs.cfg-"  megatest-version "-" megatest-fossil-hash))))
    (debug:print-info 6 *default-log-port* 
                      "runname=" runname 
                      "\n  linktree=" linktree
                      "\n  testname=" testname
                      "\n  rundir=" rundir 
                      "\n  testdir=" testdir 
                      "\n  cachedir=" cachedir
                      "\n  mtcachef=" mtcachef
                      "\n  rccachef=" rccachef)
    (cons mtcachef rccachef)))

(define (launch:setup-body #!key (force-reread #f) (areapath #f))
  (if (and (eq? *configstatus* 'fulldata)
	   *toppath*
	   (not force-reread)) ;; no need to reprocess
      *toppath*   ;; return toppath
      (let* ((use-cache (common:use-cache?)) ;; BB- use-cache checks *configdat* for use-cache setting.  We do not have *configdat*.  Bootstrapping problem here.
	     (toppath  (or *toppath* areapath (getenv "MT_RUN_AREA_HOME"))) ;; preserve toppath


	     (target   (common:args-get-target))


	     (sections (if target (list "default" target) #f)) ;; for runconfigs
	     (mtconfig (or (args:get-arg "-config") "megatest.config")) ;; allow overriding megatest.config 



             (cachefiles (launch:get-cache-file-paths areapath toppath target mtconfig))
	     (mtcachef   (car cachefiles)) ;; (and cachedir (conc cachedir "/" ".megatest.cfg-"  megatest-version "-" megatest-fossil-hash)))
	     (rccachef   (cdr cachefiles)) ;; (and cachedir (conc cachedir "/" ".runconfigs.cfg-"  megatest-version "-" megatest-fossil-hash)))


	     ) ;; (cancreate (and cachedir (common:file-exists? cachedir)(file-write-access? cachedir) (not (common:in-running-test?)))))




	(set! *toppath* toppath) ;; This is needed when we are running as a test using CMDINFO as a datasource
        ;;(BB> "launch:setup-body -- cachefiles="cachefiles)
	(cond
	 ;; if mtcachef exists just read it, however we need to assume toppath is available in $MT_RUN_AREA_HOME
	 ((and (not force-reread) mtcachef (common:file-exists? mtcachef) (get-environment-variable "MT_RUN_AREA_HOME") use-cache)
          ;;(BB> "launch:setup-body -- cond branch 1 - use-cache")
          (set! *configdat*    (configf:read-alist mtcachef))
          ;;(BB> "launch:setup-body -- 1 set! *configdat*="*configdat*)
	  (set! *runconfigdat* (configf:read-alist rccachef))
	  (set! *configinfo*   (list *configdat*  (get-environment-variable "MT_RUN_AREA_HOME")))
	  (set! *configstatus* 'fulldata)
	  (set! *toppath*      (get-environment-variable "MT_RUN_AREA_HOME"))
	  *toppath*)
	 ;; we have all the info needed to fully process runconfigs and megatest.config
	 ((and (not force-reread) mtcachef) ;; BB- why are we doing this without asking if caching is desired?
          ;;(BB> "launch:setup-body -- cond branch 2")
	  (let* ((first-pass    (find-and-read-config        ;; NB// sets MT_RUN_AREA_HOME as side effect
				 mtconfig
				 environ-patt: "env-override"
				 given-toppath: toppath
				 pathenvvar: "MT_RUN_AREA_HOME"))
		 (first-rundat  (let ((toppath (if toppath 
						   toppath
						   (car first-pass))))
				  (read-config ;; (conc toppath "/runconfigs.config") ;; this should be converted to runconfig:read but it is non-trivial, leaving it for now.
				   (conc (if (string? toppath)
					     toppath
					     (get-environment-variable "MT_RUN_AREA_HOME"))
					 "/runconfigs.config")
				   *runconfigdat* #t 
				   sections: sections))))
	    (set! *runconfigdat* first-rundat)
	    (if first-pass  ;; 
		(begin
                  ;;(BB> "launch:setup-body -- \"first-pass\"=first-pass")
		  (set! *configdat*  (car first-pass))
                  ;;(BB> "launch:setup-body -- 2 set! *configdat*="*configdat*)
		  (set! *configinfo* first-pass)
		  (set! *toppath*    (or toppath (cadr first-pass))) ;; use the gathered data unless already have it
		  (set! toppath      *toppath*)
		  (if (not *toppath*)
		      (begin
			(debug:print-error 0 *default-log-port* "you are not in a megatest area!")
			(exit 1)))

					given-toppath: toppath
					pathenvvar: "MT_RUN_AREA_HOME"))
			 (runconfigdat (begin     ;; this read of the runconfigs will see any adjustments made by re-reading megatest.config
					 (for-each (lambda (kt)
						     (setenv (car kt) (cadr kt)))
						   key-vals)
					 (read-config (conc toppath "/runconfigs.config") *runconfigdat* #t ;; consider using runconfig:read some day ...
						      sections: sections)))
                         (cachefiles   (launch:get-cache-file-paths areapath toppath target mtconfig))
                         (mtcachef     (car cachefiles))
                         (rccachef     (cdr cachefiles)))
		    (if rccachef (configf:write-alist runconfigdat rccachef))
		    (set! *runconfigdat* runconfigdat)
		    (if mtcachef (configf:write-alist *configdat* mtcachef))
		    (if (and rccachef mtcachef) (set! *configstatus* 'fulldata))))
		;; no configs found? should not happen but let's try to recover gracefully, return an empty hash-table
		(begin (set! *configdat* (make-hash-table))
                       ;;(BB> "launch:setup-body -- 3 set! *configdat*="*configdat*)
                       )
		)))
	 ;; else read what you can and set the flag accordingly
	 (else
          ;;(BB> "launch:setup-body -- cond branch 3 - else")
	  (let* ((cfgdat   (find-and-read-config 
			    (or (args:get-arg "-config") "megatest.config")
			    environ-patt: "env-override"
			    given-toppath: (get-environment-variable "MT_RUN_AREA_HOME")
			    pathenvvar: "MT_RUN_AREA_HOME")))

            (if (and cfgdat (list? cfgdat) (> (length cfgdat) 0) (hash-table? (car cfgdat)))
		(let* ((toppath  (or (get-environment-variable "MT_RUN_AREA_HOME")(cadr cfgdat)))
		       (rdat     (read-config (conc toppath  ;; convert this to use runconfig:read!
						    "/runconfigs.config") *runconfigdat* #t sections: sections)))
		  (set! *configinfo*   cfgdat)
		  (set! *configdat*    (car cfgdat))
		  (set! *runconfigdat* rdat)
		  (set! *toppath*      toppath)

	      (setenv "MT_TESTSUITENAME" (common:get-testsuite-name)))
	    (begin
	      (debug:print-error 0 *default-log-port* "failed to find the top path to your Megatest area.")
	      ;;(exit 1)
	      (set! *toppath* #f) ;; force it to be false so we return #f
	      #f
	      ))
        ;; one more attempt to cache the configs for future reading
        (let* ((cachefiles   (launch:get-cache-file-paths areapath toppath target mtconfig))
               (mtcachef     (car cachefiles))
               (rccachef     (cdr cachefiles)))
          (if (and rccachef *runconfigdat*) (configf:write-alist *runconfigdat* rccachef))
          (if (and mtcachef *configdat*)    (configf:write-alist *configdat* mtcachef))
          (if (and rccachef mtcachef *runconfigdat* *configdat*)
              (set! *configstatus* 'fulldata)))

	;; if have -append-config then read and append here
	(let ((cfname (args:get-arg "-append-config")))
	  (if (and cfname
		   (file-read-access? cfname))
	      (read-config cfname *configdat* #t))) ;; values are added to the hash, no need to do anything special.
	*toppath*)))

;; Always use two or four digit decimal
;; 1.01, 1.02...1.10,1.11,1.1101 ... 1.99,2.00..

(declare (unit megatest-version))

(define megatest-version 1.6407)

[contours]
#     mode-patt/tag-expr
quick selector=QUICKPATT/quick
full  areas=fullrun,ext-tests; selector=MAXPATT/
all   areas=fullrun,ext-tests
snazy areas=%; selector=QUICKPATT/

[nopurpose]

  -test-paths             : get the test paths matching target, runname, item and test
                            patterns.
  -list-disks             : list the disks available for storing runs
  -list-targets           : list the targets in runconfigs.config
  -list-db-targets        : list the target combinations used in the db
  -show-config            : dump the internal representation of the megatest.config file
  -show-runconfig         : dump the internal representation of the runconfigs.config file
  -dumpmode MODE          : dump in MODE format instead of sexpr, MODE=json,ini,sexp etc. (add -debug 0,9 to see which file contributes each line)
  -show-cmdinfo           : dump the command info for a test (run in test environment)
  -section sectionName
  -var varName            : for config and runconfig lookup value for sectionName varName
  -since N                : get list of runs changed since time N (Unix seconds)
  -fields fieldspec       : fields to include in json dump; runs:id,runame+tests:testname+steps
  -sort fieldname         : in -list-runs sort tests by this field

         (system (conc "mkdir -p " log-dir)))
     (open-output-file logpath))
   (exn ()
        (debug:print-error 0 *default-log-port* "Could not open log file for write: "logpath)
        (define *didsomething* #t)  
        (exit 1))))

;; this segment will run launch:setup only if -log is not set. This is fairly safe as servers are not
;; manually started and thus should never be started in a non-megatest area. Thus no need to handle situation
;; where (launch:setup) returns #f?
;;
(if (or (args:get-arg "-log")(args:get-arg "-server")) ;; redirect the log always when a server
    (handle-exceptions
	exn
	(begin
	  (print "ERROR: Failed to switch to log output. " ((conition-property-accessor 'exn 'message) exn))
	  )
      (let* ((tl   (or (args:get-arg "-log")(launch:setup)))   ;; run launch:setup if -server, ensure we do NOT run launch:setup if -log specified
	     (logf (or (args:get-arg "-log") ;; use -log unless we are a server, then craft a logfile name
		       (conc tl "/logs/server-" (current-process-id) "-" (get-host-name) ".log")))
	     (oup  (open-logfile logf)))
	(if (not (args:get-arg "-log"))
	    (hash-table-set! args:arg-hash "-log" logf)) ;; fake out future queries of -log
	(debug:print-info 0 *default-log-port* "Sending log output to " logf)
	(set! *default-log-port* oup))))

	  (if (and rundir ;; have all needed variabless
		   (directory-exists? rundir)
		   (file-write-access? rundir))
	      (begin
                (if (not (common:in-running-test?))
                    (configf:write-alist data cfgf))
		;; force re-read of megatest.config - this resolves circular references between megatest.config
		(launch:setup force-reread: #t)
		(launch:cache-config))) ;; we can safely cache megatest.config since we have a valid runconfig
	  data))))

(if (args:get-arg "-show-runconfig")
    (let ((tl (launch:setup)))
      (push-directory *toppath*)
      (let ((data (full-runconfigs-read)))

;; run all tests are are Not COMPLETED and PASS or CHECK
(if (or (args:get-arg "-runall")
	(args:get-arg "-run")
	(args:get-arg "-rerun-clean")
	(args:get-arg "-rerun-all")
	(args:get-arg "-runtests"))
    (let ((need-clean (or (args:get-arg "-rerun-clean")
                          (args:get-arg "-rerun-all"))))
      (general-run-call 
       "-runall"
       "run all tests"
       (lambda (target runname keys keyvals)
         (if (args:get-arg "-rerun-clean") ;; first set states/statuses correct
             (let ((states   (or (configf:lookup *configdat* "validvalues" "cleanrerun-states")
                                 "KILLREQ,KILLED,UNKNOWN,INCOMPLETE,STUCK,NOT_STARTED"))
                   (statuses (or (configf:lookup *configdat* "validvalues" "cleanrerun-statuses")
                                 "FAIL,INCOMPLETE,ABORT,CHECK")))
               (hash-table-set! args:arg-hash "-preclean" #t)
               (runs:operate-on 'set-state-status
                                target
                                (common:args-get-runname)  ;; (or (args:get-arg "-runname")(args:get-arg ":runname"))
                                "%" ;; (common:args-get-testpatt #f) ;; (args:get-arg "-testpatt")
                                state:  states
                                ;; status: statuses
                                new-state-status: "NOT_STARTED,n/a")
               (runs:clean-cache target runname *toppath*)
               (runs:operate-on 'set-state-status
                                target
                                (common:args-get-runname)  ;; (or (args:get-arg "-runname")(args:get-arg ":runname"))
                                "%" ;; (common:args-get-testpatt #f) ;; (args:get-arg "-testpatt")
                                ;; state:  states
                                status: statuses
                                new-state-status: "NOT_STARTED,n/a")))
         ;; RERUN ALL
         (if (args:get-arg "-rerun-all") ;; first set states/statuses correct
             (begin
               (hash-table-set! args:arg-hash "-preclean" #t)
               (runs:operate-on 'set-state-status
                                target
                                (common:args-get-runname)  ;; (or (args:get-arg "-runname")(args:get-arg ":runname"))
                                "%" ;; (common:args-get-testpatt #f) ;; (args:get-arg "-testpatt")
                                state:  #f
                                ;; status: statuses
                                new-state-status: "NOT_STARTED,n/a")
               (runs:clean-cache target runname *toppath*)
               (runs:operate-on 'set-state-status
                                target
                                (common:args-get-runname)  ;; (or (args:get-arg "-runname")(args:get-arg ":runname"))
                                "%" ;; (common:args-get-testpatt #f) ;; (args:get-arg "-testpatt")
                                ;; state:  states
                                status: #f
                                new-state-status: "NOT_STARTED,n/a")))
         (runs:run-tests target
                         runname
                         #f ;; (common:args-get-testpatt #f)
                         ;; (or (args:get-arg "-testpatt")
                         ;;     "%")
                         user
                         args:arg-hash)))))

;;======================================================================
;; run one test
;;======================================================================

;; 1. find the config file
;; 2. change to the test directory

;; (include "common.scm")
;; (include "megatest-version.scm")

;; fake out readline usage of toplevel-command
(define (toplevel-command . a) #f)

(use srfi-1 posix srfi-69 readline ;;  regex regex-case srfi-69 apropos json http-client directory-utils rpc typed-records;; (srfi 18) extras)
     srfi-18 extras format pkts regex regex-case
     (prefix dbi dbi:)) ;;  zmq extras)

(declare (uses common))
(declare (uses megatest-version))
(declare (uses margs))
(declare (uses configf))
;; (declare (uses rmt))

(define help (conc "
mtutil, part of the Megatest tool suite, documentation at http://www.kiatoa.com/fossils/megatest
  version " megatest-version "
  license GPL, Copyright Matt Welland 2006-2017

Usage: mtutil action [options]
  -h                         : this help
  -manual                    : show the Megatest user manual
  -version                   : print megatest version (currently " megatest-version ")
			     
Actions:		     
   run                       : initiate runs
   remove                    : remove runs
   rerun                     : register action for processing
   set-ss                    : set state/status
   archive                   : compress and move test data to archive disk
   kill                      : stop tests or entire runs
   db                        : database utilities
   areas, contours, setup    : show areas, contours or setup section from megatest.config

Contour actions:
   process                   : runs import, rungen and dispatch 
			     
Selectors 		     
  -immediate                 : apply this action immediately, default is to queue up actions
  -area areapatt1,area2...   : apply this action only to the specified areas
  -target key1/key2/...      : run for key1, key2, etc.
  -test-patt p1/p2,p3/...    : % is wildcard
  -run-name                  : required, name for this particular test run
  -contour contourname       : run all targets for contourname, requires -run-name, -target
  -state-status c/p,c/f      : Specify a list of state and status patterns
  -tag-expr tag1,tag2%,..    : select tests with tags matching expression
  -mode-patt key             : load testpatt from <key> in runconfigs instead of default TESTPATT
                               if -testpatt and -tagexpr are not specified
  -new state/status          : specify new state/status for set-ss
			     
Misc 			     
  -start-dir path            : switch to this directory before running mtutil
  -set-vars V1=1,V2=2        : Add environment variables to a run NB// these are
                                   overwritten by values set in config files.
  -log logfile               : send stdout and stderr to logfile
  -repl                      : start a repl (useful for extending megatest)
  -load file.scm             : load and run file.scm
  -debug N|N,M,O...          : enable debug messages 0-N or N and M and O ...
			     
Utility			     
 db pgschema                 : emit postgresql schema; do \"mtutil db pgschema | psql -d mydb\"

Examples:

# Start a megatest run in the area \"mytests\"
mtutil run -area mytests -target v1.63/aa3e -mode-patt MYPATT -tag-expr quick

# Start a contour
mtutil run -contour quick -target v1.63/aa3e 

Called as " (string-intersperse (argv) " ") "
Version " megatest-version ", built from " megatest-fossil-hash ))

;;
(if (and (not (null? remargs))
	 (not (or
	       (args:get-arg "-runstep")
	       (args:get-arg "-envcap")
	       (args:get-arg "-envdelta")
	       (member *action* '("db"))   ;; very loose checks on db.
	       (equal? *action* "show")    ;; just keep going if list
	       )))
    (debug:print-error 0 *default-log-port* "Unrecognised arguments: " (string-intersperse (if (list? remargs) remargs (argv))  " ")))

(if (or (args:any? "-h" "help" "-help" "--help")
	(member *action* '("-h" "-help" "--help" "help")))
    (begin
      (print help)

	 (toppath  (configf:lookup mtconf "dyndat" "toppath"))
	 (pdbpath  (or (configf:lookup mtconf "setup"  "pdbpath") pktsdir)))
    (if (not (and  pktsdir toppath pdbpath))
	(begin
	  (print "ERROR: settings are missing in your megatest.config for area management.")
	  (print "  you need to have pktsdir in the [setup] section."))
	(let* ((pdb  (open-queue-db pdbpath "pkts.db"
				    schema: '("CREATE TABLE groups (id INTEGER PRIMARY KEY,groupname TEXT, CONSTRAINT group_constraint UNIQUE (groupname));")))
	       (res  (proc pktsdirs pktsdir pdb)))
	  (dbi:close pdb)
	  res
	  ))))

(define (load-pkts-to-db mtconf)
  (with-queue-db
   mtconf
   (lambda (pktsdirs pktsdir pdb)
     (for-each
      (lambda (pktsdir) ;; look at all
	(if (and (file-exists? pktsdir)
		 (directory? pktsdir)
		 (file-read-access? pktsdir))
	    (let ((pkts (glob (conc pktsdir "/*.pkt"))))
	      (for-each
	       (lambda (pkt)
		 (let* ((uuid    (cadr (string-match ".*/([0-9a-f]+).pkt" pkt)))
			(exists  (lookup-by-uuid pdb uuid #f)))
		   (if (not exists)
		       (let* ((pktdat (string-intersperse
				       (with-input-from-file pkt read-lines)
				       "\n"))
			      (apkt   (pkt->alist pktdat))
			      (ptype  (alist-ref 'T apkt))
			      (parent (alist-ref 'P apkt)))
			 (add-to-queue pdb pktdat uuid (or ptype 'cmd) parent 0)
			 (debug:print 4 *default-log-port* "Added " uuid " of type " ptype " to queue"))
		       (debug:print 4 *default-log-port* "pkt: " uuid " exists, skipping...")
		       )))
	       pkts))))
      (string-split pktsdirs)))))

(define (get-pkt-alists pkts)

  (seconds->local-time (current-seconds)) "%Yw%V.%w-%H%M"))

;; collect, translate, collate and assemble a pkt from the command-line
;;
;; sched => force the run start time to be recorded as sched Unix
;; epoch. This aligns times properly for triggers in some cases.
;;
(define (command-line->pkt action args-alist sched-in #!key (extra-dat '()))
  (let* ((sched     (cond
		     ((vector? sched-in)(local-time->seconds sched-in)) ;; we recieved a time
		     ((number? sched-in) sched-in)
		     (else     (current-seconds))))
	 (args-data (if args-alist
			(if (hash-table? args-alist) ;; seriously?
			    (hash-table->alist args-alist)
			    args-alist)
			(hash-table->alist args:arg-hash))) ;; if no args-alist then we assume this is a call driven directly by commandline
	 (alldat    (apply append (list 'T "cmd"
					'a action
					'U (current-user-name)
					'D sched)
                           extra-dat
			   (map (lambda (x)
				  (let* ((param (car x))
					 (value (cdr x))
					 (pmeta (assoc param *arg-keys*))    ;; translate the card key to a megatest switch or parameter
					 (smeta (assoc param *switch-keys*)) ;; first lookup the key in arg-keys or switch-keys
					 (meta  (if (or pmeta smeta)
						    (cdr (or pmeta smeta))   ;; found it?

			'())
		    (if (or (not action)
			    (equal? action "run"))
			`(("-preclean"  . " ")
			  ("-rerun-all" . " "))      ;; if run we *always* want preclean set, use single space as placeholder
			'())
		    )
		   sched
                   extra-dat: `((a . ,runkey))  ;; we need the run key for marking the run as launched
                   )))
      (with-output-to-file
	  (conc pktsdir "/" uuid ".pkt")
	(lambda ()
	  (print pkt))))))


(define (val-alist->areas val-alist)
  (string-split (or (alist-ref 'areas val-alist) "") ","))

(define (area-allowed? area areas)
  (or (not areas)
      (null? areas)
      (member area areas)))

;; (use trace)(trace create-run-pkt)

;; collect all needed data and create run pkts for contours with changed inputs
;;
(define (generate-run-pkts mtconf toppath)
  (let ((std-runname (conc "sched"  (time->string (seconds->local-time (current-seconds)) "%M%H%d"))))
    (with-queue-db

		     ((scheduled)
		      (if (not (alist-ref 'cron val-alist)) ;; gotta have cron spec
			  (print "ERROR: bad sense spec \"" (string-intersperse sense " ") "\" params: " val-alist)
			  (let* ((run-name (alist-ref 'run-name val-alist))
				 (target   (alist-ref 'target   val-alist))
				 (crontab  (alist-ref 'cron     val-alist))
                                 (areas    (val-alist->areas val-alist))
				 ;; (action   (alist-ref 'action   val-alist))
				 (cron-safe-string (string-translate (string-intersperse (string-split (alist-ref 'cron val-alist)) "-") "*" "X"))
				 (runname  std-runname)) ;; (conc "sched" (time->string (seconds->local-time (current-seconds)) "%M%H%d")))))
			    ;; (print "last-run: " last-run " need-run: " need-run)
			    ;; (if need-run
			    (case (string->symbol action)
			      ((sync sync-prepend)

			       (if (common:extended-cron crontab #f last-run)
				   (push-run-spec torun contour runkey
						  `((message . ,(conc ruletype ":" cron-safe-string))
						    (runname . ,runname)
						    (runtrans . ,runtrans)
						    (action  . ,action)
						    (target  . ,target)))))
                              ((remove)
                               (push-run-spec torun contour runkey
						  `((message . ,(conc ruletype ":" cron-safe-string))
						    (runname . ,runname)
						    (runtrans . ,runtrans)
						    (action  . ,action)
						    (target  . ,target))))
			      (else
			       (print "ERROR: action \"" action "\" has no scheduled handler")
			       )))))

		     ((script)
		      ;; syntax is a little different here. It is a list of commands to run, "scriptname = extra_parameters;scriptname = ..."
		      ;; where scriptname may be repeated multiple times. The script must return unix-epoch of last change, new-target-name and new-run-name

						      (runtrans . ,runtrans)
						      (target  . ,runkey)))))
			     (print "Got datetime=" datetime " node=" node))))
		       val-alist))
		     
		     ((file file-or) ;; one or more files must be newer than the reference
		      (let* ((file-globs  (alist-ref 'glob val-alist))
                             (areas       (val-alist->areas val-alist))
			     (youngestdat (common:get-youngest (common:bash-glob file-globs)))
			     (youngestmod (car youngestdat)))
			;; (print "youngestmod: " youngestmod " starttimes: " starttimes)
			(if (null? starttimes) ;; this target has never been run
			    (push-run-spec torun contour runkey
					   `((message . "file:neverrun")
					     (action  . ,action)

	 
	 ;; now have to run populated
	 (for-each
	  (lambda (contour)
	    (print "contour: " contour)
	    (let* ((val       (or (configf:lookup mtconf "contours" contour) ""))
		   (val-alist (val->alist val))
		   (areas     (val-alist->areas val-alist))
		   (selector  (alist-ref 'selector val-alist))
		   (mode-tag  (and selector (string-split-fields "/" selector #:infix)))
		   (mode-patt (and mode-tag (if (eq? (length mode-tag) 2)(cadr mode-tag) #f)))
		   (tag-expr  (and mode-tag (if (null? mode-tag) #f (car mode-tag)))))
	      (for-each
	       (lambda (runkeydatset)
		 ;; (print "runkeydatset: ")(pp runkeydatset)
		 (let ((runkey     (car runkeydatset))
		       (runkeydats (cadr runkeydatset)))
		   (for-each
		    (lambda (runkeydat)
		      (for-each
		       (lambda (area)
                         (if (area-allowed? area areas) ;; is this area to be handled (from areas=a,b,c ...)
                             (let ((runname (alist-ref 'runname runkeydat))
                                   (runtrans (alist-ref 'runtrans runkeydat))
                                   (reason  (alist-ref 'message runkeydat))
                                   (sched   (alist-ref 'sched   runkeydat))
                                   (action  (alist-ref 'action  runkeydat))
                                   (dbdest  (alist-ref 'dbdest  runkeydat))
                                   (append  (alist-ref 'append  runkeydat))
                                   (target  (or (alist-ref 'target  runkeydat) runkey))) ;; override with target if forced
                               (print "Have: runkey=" runkey " contour=" contour " area=" area " action=" action " tag-expr=" tag-expr " mode-patt=" mode-patt " target=" target)
                               (if (case (or (and action (string->symbol action)) 'noaction)  ;; ensure we have the needed data to run this action
                                     ((noaction) #f)
                                     ((run)      (and runname reason))
				 ((sync sync-prepend)     (and reason dbdest))
                                     (else       #f))
                                   ;; instead of unwrapping the runkeydat alist, pass it directly to create-run-pkt
                                   (create-run-pkt mtconf action area runkey runname mode-patt tag-expr pktsdir reason contour sched dbdest append runtrans) 
                                   (print "ERROR: Missing info to make a " action " call: runkey=" runkey " contour=" contour " area=" area  " tag-expr=" tag-expr " mode-patt=" mode-patt " dbdest=" dbdest)
                                   ))
                             (print "NOTE: skipping " runkeydat " for area, not in " areas)))
		       all-areas))
		    runkeydats)))
	       (let ((res (configf:get-section torun contour))) ;; each contour / target
		 ;; (print "res=" res)
		 res))))
	  (hash-table-keys torun)))))))

(let ((debugcontrolf (conc (get-environment-variable "HOME") "/.mtutilrc")))
  (if (file-exists? debugcontrolf)
      (load debugcontrolf)))

(if *action*
    (case (string->symbol *action*)
      ((run remove rerun set-ss archive kill list)
       (let* ((mtconfdat (simple-setup (args:get-arg "-start-dir")))
	      (mtconf    (car mtconfdat))
	      (pktsdirs  (configf:lookup mtconf "setup" "pktsdirs"))
	      (pktsdir   (if pktsdirs (car (string-split pktsdirs " ")) #f))
	      (adjargs   (hash-table-copy args:arg-hash)))
	 ;; (for-each
	 ;;  (lambda (key)

			 (load-pkts-to-db mtconf)
			 (generate-run-pkts mtconf toppath)
			 (load-pkts-to-db mtconf)
			 (dispatch-commands mtconf toppath)))
	   ((import)   (load-pkts-to-db mtconf)) ;; import pkts
	   ((rungen)   (generate-run-pkts mtconf toppath))
	   ((dispatch) (dispatch-commands mtconf toppath)))))
      ;; misc
      ((show)
       (if (> (length remargs) 0)
	   (let* ((mtconfdat (simple-setup (args:get-arg "-start-dir")))
		  (mtconf    (car mtconfdat))
		  (sect-dat (configf:get-section mtconf (car remargs))))
	     (if sect-dat
		 (for-each
		  (lambda (entry)
		    (if (> (length entry) 1)
			(print (car entry) "   " (cadr entry))
			(print (car entry))))
		  sect-dat)
		 (print "No section \"" (car remargs) "\" found")))
	   (print "ERROR: list requires section parameter; areas, setup or contours")))
      ((gendot)
       (let* ((mtconfdat (simple-setup (args:get-arg "-start-dir")))
	      (mtconf    (car mtconfdat)))
	 (with-queue-db
	  mtconf
	  (lambda (pktsdirs pktsdir conn)
	    (make-report "out.dot" conn '())))))
      ((db)
       (if (null? remargs)
	   (print "ERROR: missing sub command for db command")
	   (let ((subcmd (car remargs)))
	     (case (string->symbol subcmd)
	       ((pgschema)
		(let* ((install-home (common:get-install-area))

      ;; (import (prefix sqlite3 sqlite3:)) ;; doesn't work ...
      
      (install-history-file (get-environment-variable "HOME") ".mtutil_history") ;;  [homedir] [filename] [nlines])
      (current-input-port (make-readline-port "mtutil> "))
      (if (args:get-arg "-repl")
	  (repl)
	  (load (args:get-arg "-load")))))

#|
(define mtconf (car (simple-setup #f)))
(define dat (with-queue-db mtconf (lambda (conn)(get-pkts conn '()))))
(pp (pkts#flatten-all dat '((cmd . ((parent . P)(url . M)))(runtype . ((parent . P)))) 'id 'group-id 'uuid 'parent 'pkt-type 'pkt 'processed))
|#

# To get emacs font highlighing in the various megatest configs do this:
#
# Install emacs-goodies-el:
#    sudo apt install emacs-goodies-el
# Add to your ~/.emacs file:
#    (add-to-list 'auto-mode-alist '("config\\'" . conf-space-mode))
#

# example of a cron entry to run sync using db spec pgdb, with pgdb setting in file local.config
#
[a/b/c]
all:scheduled:sync          cron=  0/5 * * * *;dbdest=pgdb;appendconf=/mfs/matt/.sysmaint/local.config
#  quick:scheduled:sync        cron=  0/5 * * * *;dbdest=pgdb;appendconf=/mfs/matt/.sysmaint/local.config
# fast:scheduled:sync-prepend cron=  0/1 * * * *;dbdest=pgdb;appendconf=/mfs/matt/.sysmaint/local.config

[scriptinc ./gentargets.sh #{getenv USER}]
# [v1.23/45/67]

# tip will be replaced with hashkey?

# [%/%/%] doesn't work

[/.*/]

# [v1.63/tip/dev]
# file:   files changes since last run trigger new run
# script: script is called with unix seconds as last parameter (other parameters are preserved)
#
# contour:sensetype:action params            data
# commented out for debug
# quick:file:run             runtrans=auto;         glob=/home/matt/data/megatest/*.scm
# snazy:file:run             runtrans=corporate-ww; glob=/home/matt/data/megatest/*.scm
short:file:run             runtrans=short;        glob=/home/matt/data/megatest/*.scm

# script returns change-time (unix epoch), new-target-name, run-name
#
# quick:script:run           checkfossil = http://www.kiatoa.com/fossils/megatest v1.63;\
#                            checkfossil = http://www.kiatoa.com/fossils/megatest_qa trunk

# # fossil based trigger
# #
# quick:fossil:run           http://www.kiatoa.com/fossils/megatest=v1.63;\
#                            http://www.kiatoa.com/fossils/megatest_qa=trunk;\
# 		           http://www.kiatoa.com/fossils/megatest=v1.64

# field          allowed values
# -----          --------------
# minute         0-59
# hour           0-23
# day of month   1-31
# month          1-12 (or names, future development)

	  exn
	  (let ((call-chain (get-call-chain))
		(msg        ((condition-property-accessor 'exn 'message) exn)))
	    (if (< count 5)
		(begin ;; this call is colliding, do some crude stuff to fix it.
		  (debug:print 0 *default-log-port* "ERROR: *configdat* was inaccessible! This should never happen. Retry #" count)
		  (launch:setup force-reread: #t)
		  (fatal-loop (+ count 1))) 
		(begin
		  (debug:print 0 *default-log-port* "FATAL: *configdat* was inaccessible! This should never happen. Retried " count " times. Message: " msg)
		  (debug:print 0 *default-log-port* "Call chain:")
		  (with-output-to-port *default-log-port*

                    (lambda ()
                      (print "*configdat* is >>"*configdat*"<<")
                      (pp *configdat*)
                      (pp call-chain)))
                  
		  (exit 1))))
          ;;(bb-check-path msg: "runs:set-megatest-env-vars block 1.5")
          (when (or (not *configdat*) (not (hash-table? *configdat*)))
              (debug:print 0 *default-log-port* "WARNING: *configdat* was inaccessible! This should never happen.  Brute force reread.")
              ;;(BB> "ERROR: *configdat* was inaccessible! This should never happen.  Brute force reread.")
              (thread-sleep! 2) ;; assuming nfs lag.
              (launch:setup force-reread: #t))
          (alist->env-vars (hash-table-ref/default *configdat* "env-override" '())))) ;;;; environment is tainted HERE in this let block.
    ;;(bb-check-path msg: "runs:set-megatest-env-vars block 2")
    ;; Lets use this as an opportunity to put MT_RUNNAME in the environment
    (let ((runname  (if inrunname inrunname (rmt:get-run-name-from-id run-id))))
      (if runname
	  (setenv "MT_RUNNAME" runname)
	  (debug:print-error 0 *default-log-port* "no value for runname for id " run-id)))

				  (if (runs:lownoise (conc "maxjobgroup " jobgroup) 60)
				      (debug:print 1 *default-log-port* "WARNING: number of jobs " num-running-in-jobgroup 
						   " in jobgroup \"" jobgroup "\" exceeds limit of " job-group-limit))
				  #t)
				 (else #f))))
	  (list (not can-not-run-more) num-running num-running-in-jobgroup max-concurrent-jobs job-group-limit)))))

(define (runs:run-pre-hook run-id)
    (let* ((run-pre-hook   (configf:lookup *configdat* "runs" "pre-hook"))
           (existing-tests (if run-pre-hook
                               (rmt:get-tests-for-run run-id "%" '() '() ;; run-id testpatt states statuses
                                                      #f #f ;; offset limit
                                                      #f ;; not-in
                                                      #f ;; sort-by
                                                      #f ;; sort-order
                                                      #f ;; get full data (not 'shortlist)
                                                      0 ;; (runs:gendat-inc-results-last-update *runs:general-data*) ;; last update time
                                                      'dashboard)
                               '()))
           (log-dir         (conc *toppath* "/logs"))
           (log-file        (conc "pre-hook-" (string-translate (getenv "MT_TARGET") "/" "-") "-" (getenv "MT_RUNNAME") ".log"))
           (full-log-fname  (conc log-dir "/" log-file)))
      (if run-pre-hook
          (if (null? existing-tests)
              (let* ((use-log-dir (if (not (directory-exists? log-dir))
                                      (handle-exceptions
                                       exn
                                       (begin
                                         (debug:print 0 *default-log-port* "WARNING: Failed to create " log-dir)
                                         #f)
                                       (create-directory log-dir #t)
                                       #t)
                                      #t))
                     (start-time   (current-seconds))
                     (actual-logf  (if use-log-dir full-log-fname log-file)))
                (handle-exceptions
                 exn
                 (begin
                   (print-call-chain *default-log-port*)
                   (debug:print 0 *default-log-port* "Message: " ((condition-property-accessor 'exn 'message) exn))
                   (debug:print 0 *default-log-port* "ERROR: failed to run pre-hook " run-pre-hook ", check the log " log-file))
                 (debug:print-info 0 *default-log-port* "running run-pre-hook: \"" run-pre-hook "\", log is " actual-logf)
                 (system (conc run-pre-hook " >> " actual-logf " 2>&1"))
                 (debug:print-info 0 *default-log-port* "pre-hook \"" run-pre-hook "\" took " (- (current-seconds) start-time) " seconds to run.")))
              (debug:print 0 *default-log-port* "Skipping pre-hook call \"" run-pre-hook "\" as there are existing tests for this run.")))))
    
;;  test-names: Comma separated patterns same as test-patts but used in selection 
;;              of tests to run. The item portions are not respected.
;;              FIXME: error out if /patt specified
;;            
(define (runs:run-tests target runname test-patts user flags #!key (run-count 1)) ;; test-names
  (let* ((keys               (keys:config-get-fields *configdat*))
	 (keyvals            (keys:target->keyval keys target))

		      (setup-env-defaults runconfigf run-id *already-seen-runconfig-info* keyvals target)
		      (begin
			(debug:print 0 *default-log-port* "WARNING: You do not have a run config file: " runconfigf)
			#f)))

    (if (not test-patts) ;; first time in - adjust testpatt
	(set! test-patts (common:args-get-testpatt runconf)))
    ;; if test-patts is #f at this point there is something wrong and we need to bail out
    (if (not test-patts)
	(begin
	  (debug:print 0 *default-log-port* "WARNING: there is no test pattern for this run. Exiting now.")
	  (exit 0)))
    
    (if (args:get-arg "-tagexpr")
	(begin
	  (set! allowed-tests (string-join (runs:get-tests-matching-tags (args:get-arg "-tagexpr")) ","))
	  	  (debug:print-info 0 *default-log-port* "filtering initial test list with tagexpr: " (args:get-arg "-tagexpr") " => " allowed-tests)
		  ));; tests will be ANDed with this list

    ;; register this run in monitor.db

	       (rmt:set-tests-state-status run-id test-names state status "NOT_STARTED" status)))
	   ;; list of state/status pairs separated by spaces
	   (string-split (or (configf:lookup *configdat* "setup" "allow-auto-rerun") "")))))

    ;; Ensure all tests are registered in the test_meta table
    (runs:update-all-test_meta #f)

    ;; run the run prehook if there are no tests yet run for this run:
    ;;
    (runs:run-pre-hook run-id)
    
    ;; now add non-directly referenced dependencies (i.e. waiton)
    ;;======================================================================
    ;; refactoring this block into tests:get-full-data
    ;;
    ;; What happended, this code is now duplicated in tests!?
    ;;
    ;;======================================================================

    (let* ((write-access-actions '(remove-runs set-state-status archive run-wait))
           (dbfile             (conc  *toppath* "/megatest.db"))
           (readonly-mode      (not (file-write-access? dbfile))))
      (when (and readonly-mode
                 (member action write-access-actions))
        (debug:print-error 0 *default-log-port* "megatest.db is readonly.  Cannot proceed with action ["action"] in which write-access isrequired .")
        (exit 1)))

    
    (debug:print-info 4 *default-log-port* "runs:operate-on => Header: " header " action: " action " new-state-status: " new-state-status)
    (if (> 2 (length state-status))
	(begin
	  (debug:print-error 0 *default-log-port* "the parameter to -set-state-status is a comma delimited string. E.g. COMPLETED,FAIL")
	  (exit)))
    (for-each

  (equal? (configf:lookup *configdat* "server" "required") "yes"))

;; no elegance here ...
;;
(define (tasks:kill-server hostname pid #!key (kill-switch ""))
  (debug:print-info 0 *default-log-port* "Attempting to kill server process " pid " on host " hostname)
  (setenv "TARGETHOST" hostname)
  (let ((logdir (if (directory-exists? "logs")
                    "logs/"
                    "")))
    (setenv "TARGETHOST_LOGF" (conc logdir "server-kills.log"))
    (system (conc "nbfake kill "kill-switch" "pid))
    
    (unsetenv "TARGETHOST_LOGF")
    (unsetenv "TARGETHOST")))
 
;;======================================================================
;; M O N I T O R S
;;======================================================================

(define (tasks:remove-monitor-record mdb)
  (sqlite3:execute mdb "DELETE FROM monitors WHERE pid=? AND hostname=?;"

	   (getenv "MT_TARGET")
	   (getenv "MT_RUNNAME")
	   (getenv "MT_TEST_NAME")
	   (getenv "MT_ITEMPATH"))
      (conc (getenv "MT_LINKTREE")  "/"
	    (getenv "MT_TARGET")    "/"
	    (getenv "MT_RUNNAME")   "/"
	    (getenv "MT_TEST_NAME")
	    (if (and (getenv "MT_ITEMPATH")
                     (not (string=? "" (getenv "MT_ITEMPATH"))))
		(conc "/" (getenv "MT_ITEMPATH"))
                ""))
      #f))

;; if .testconfig exists in test directory read and return it
;; else if have cached copy in *testconfigs* return it IFF there is a section "have fulldata"
;; else read the testconfig file
;;   if have path to test directory save the config as .testconfig and return it
;;