Megatest

	$(INSTALL) $< $@
	chmod a+x $@

$(PREFIX)/bin/loadrunner : utils/loadrunner
	$(INSTALL) $< $@
	chmod a+x $@

# $(PREFIX)/bin/refdb : refdb
# 	$(INSTALL) $< $@
# 	chmod a+x $@

deploytarg/nbfake : utils/nbfake
	$(INSTALL) $< $@
	chmod a+x $@

deploytarg/nbfind : utils/nbfind
	$(INSTALL) $< $@
	chmod a+x $@


# install dashboard as dboard so wrapper script can be called dashboard
$(PREFIX)/bin/.$(ARCHSTR)/dboard : dboard $(FILES)
	utils/mk_wrapper $(PREFIX) dboard $(PREFIX)/bin/dashboard
	chmod a+x $(PREFIX)/bin/dashboard
	$(INSTALL) dboard $(PREFIX)/bin/.$(ARCHSTR)/dboard

install : $(PREFIX)/bin/.$(ARCHSTR) $(PREFIX)/bin/.$(ARCHSTR)/mtest $(PREFIX)/bin/megatest \
          $(PREFIX)/bin/.$(ARCHSTR)/dboard $(PREFIX)/bin/dashboard $(HELPERS) $(PREFIX)/bin/nbfake \
	  $(PREFIX)/bin/nbfind $(PREFIX)/bin/loadrunner $(PREFIX)/bin/mt_xterm \
          $(PREFIX)/bin/newdashboard

$(PREFIX)/bin/.$(ARCHSTR) : 
	mkdir -p $(PREFIX)/bin/.$(ARCHSTR)

test: tests/tests.scm
	cd tests;csi -I .. -b -n tests.scm

    get-run-name-from-id
    get-runs
    get-all-run-ids
    get-prev-run-ids
    get-run-ids-matching-target
    get-runs-by-patt
    get-steps-data
    get-steps-for-test
    login
    testmeta-get-record
    have-incompletes?
    synchash-get
    ))

(define api:write-queries

	    ((get-prev-run-ids)             (apply db:get-prev-run-ids dbstruct params))
	    ((get-run-ids-matching-target)  (apply db:get-run-ids-matching-target dbstruct params))
	    ((get-runs-by-patt)             (apply db:get-runs-by-patt dbstruct params))
	    ((get-run-name-from-id)         (apply db:get-run-name-from-id dbstruct params))

	    ;; STEPS
	    ((get-steps-data)               (apply db:get-steps-data dbstruct params))
	    ((get-steps-for-test)           (apply db:get-steps-for-test dbstruct params))

	    ;; MISC
	    ((have-incompletes?)            (apply db:have-incompletes? dbstruct params))
	    ((login)                        (apply db:login dbstruct params))
	    ((general-call)                 (let ((stmtname   (car params))
						  (run-id     (cadr params))
						  (realparams (cddr params)))

	       ;; These next two are intentional bad values to ensure errors if they should not
	       ;; get filled in properly.
	       (logfile       "/this/dir/better/not/exist")
	       (rundir        (if testdat 
				  (db:test-get-rundir testdat)
				  logfile))
	       (testdat-path  (conc rundir "/testdat.db")) ;; this gets recalculated until found 
	       (teststeps     (if testdat (tests:get-compressed-steps dbstruct run-id test-id) '()))
	       (testfullname  (if testdat (db:test-get-fullname testdat) "Gathering data ..."))
	       (testname      (if testdat (db:test-get-testname testdat) "n/a"))
	       (testmeta      (if testdat 
				  (let ((tm (db:testmeta-get-record dbstruct testname)))
				    (if tm tm (make-db:testmeta)))
				  (make-db:testmeta)))

						     exn 
						     (debug:print-info 0 "test db access issue in examine test for run-id " run-id ", test-id " test-id ": " ((condition-property-accessor 'exn 'message) exn))
						     (db:get-test-info-by-id dbstruct run-id test-id )))))
			       ;; (debug:print-info 0 "need-update= " need-update " curr-mod-time = " curr-mod-time)
			       (cond
				((and need-update newtestdat)
				 (set! testdat newtestdat)
				 (set! teststeps    (tests:get-compressed-steps dbstruct run-id test-id))
				 (set! logfile      (conc (db:test-get-rundir testdat) "/" (db:test-get-final_logf testdat)))
				 (set! rundir       ;; (filedb:get-path *fdb* 
				       (db:test-get-rundir testdat)) ;; )
				 (set! testfullname (db:test-get-fullname testdat))
				 ;; (debug:print 0 "INFO: teststeps=" (intersperse teststeps "\n    "))
				 
				 ;; I don't see why this was implemented this way. Please comment it ...

(define-inline (db:test-get-archived     vec) (vector-ref vec 17))

;; (define-inline (db:test-get-pass_count   vec) (vector-ref vec 15))
;; (define-inline (db:test-get-fail_count   vec) (vector-ref vec 16))
(define-inline (db:test-get-fullname     vec)
  (conc (db:test-get-testname vec) "/" (db:test-get-item-path vec)))

;; replace runs:make-full-test-name with this routine
(define (db:test-make-full-name testname itempath)
  (if (equal? itempath "") testname (conc testname "/" itempath)))

(define-inline (db:test-get-first_err    vec) (printable (vector-ref vec 15)))
(define-inline (db:test-get-first_warn   vec) (printable (vector-ref vec 16)))

(define-inline (db:test-set-cpuload!  vec val)(vector-set! vec 7 val))
(define-inline (db:test-set-diskfree! vec val)(vector-set! vec 8 val))
(define-inline (db:test-set-testname! vec val)(vector-set! vec 2 val))
(define-inline (db:test-set-state!    vec val)(vector-set! vec 3 val))

;; The steps table
(define (make-db:steps-table)(make-vector 5))
(define-inline (tdb:steps-table-get-stepname   vec)    (vector-ref  vec 0))
(define-inline (tdb:steps-table-get-start      vec)    (vector-ref  vec 1))
(define-inline (tdb:steps-table-get-end        vec)    (vector-ref  vec 2))
(define-inline (tdb:steps-table-get-status     vec)    (vector-ref  vec 3))
(define-inline (tdb:steps-table-get-runtime    vec)    (vector-ref  vec 4))
(define-inline (tdb:steps-table-get-log-file   vec)    (vector-ref  vec 5))

(define-inline (tdb:step-stable-set-stepname!  vec val)(vector-set! vec 0 val))
(define-inline (tdb:step-stable-set-start!     vec val)(vector-set! vec 1 val))
(define-inline (tdb:step-stable-set-end!       vec val)(vector-set! vec 2 val))
(define-inline (tdb:step-stable-set-status!    vec val)(vector-set! vec 3 val))
(define-inline (tdb:step-stable-set-runtime!   vec val)(vector-set! vec 4 val))

;; The data structure for handing off requests via wire

		(loop (car tal)
		      (cdr tal))))))))

;;======================================================================
;;  S T E P S
;;======================================================================


























































































(define (dcommon:populate-steps teststeps steps-matrix)
  (let ((max-row 0))
    (if (null? teststeps)
	(iup:attribute-set! steps-matrix "CLEARVALUE" "CONTENTS")
	(let loop ((hed    (car teststeps))
		   (tal    (cdr teststeps))
		   (rownum 1)

					    new-status
					    (args:get-arg "-m") #f)
		    ;; need to update the top test record if PASS or FAIL and this is a subtest
		    ;; NO NEED TO CALL roll-up-pass-fail-counts HERE, THIS IS DONE IN roll-up-pass-fail-counts called by tests:test-set-status!
		    ))
	      ;; for automated creation of the rollup html file this is a good place...
	      (if (not (equal? item-path ""))
		  (tests:summarize-items run-id test-id test-name #f))
	      (tests:summarize-test run-id test-id)) ;; don't force - just update if no
	    (mutex-unlock! m)
	    (debug:print 2 "Output from running " fullrunscript ", pid " (vector-ref exit-info 0) " in work area " 
			 work-area ":\n====\n exit code " (vector-ref exit-info 2) "\n" "====\n")
	    (if (not (vector-ref exit-info 1))
		(exit 4)))))))

;; set up the very basics needed for doing anything here.

		     #t)))))))
      (sqlite3:finalize! lckqry)
      (sqlite3:finalize! mklckqry)
      result)))

(define (lock-queue:release-lock fname test-id #!key (count 10))
  (let* ((dbdat (lock-queue:open-db fname)))
    (tasks:wait-on-journal (lock-queue:db-dat-get-path dbdat) 1200 "lock-queue:release-lock; waiting on journal")
    (handle-exceptions
     exn
     (begin
       (debug:print 0 "WARNING: Failed to release queue lock. Will try again in few seconds")
       (debug:print 0 " message: " ((condition-property-accessor 'exn 'message) exn))
       (thread-sleep! (/ count 10))
       (if (> count 0)

(define (lock-queue:steal-lock dbdat test-id #!key (count 10))
  (debug:print-info 0 "Attempting to steal lock at " (lock-queue:db-dat-get-path dbdat))
  (tasks:wait-on-journal (lock-queue:db-dat-get-path dbdat) 1200 "lock-queue:steal-lock; waiting on journal")
  (handle-exceptions
   exn
   (begin
     (tadebug:print 0 "WARNING: Failed to steal queue lock. Will try again in few seconds")
     (debug:print 0 " message: " ((condition-property-accessor 'exn 'message) exn))
     (thread-sleep! 10)
     (if (> count 0)
	 (lock-queue:steal-lock dbdat test-id count: (- count 1))
	 #f))
   (sqlite3:execute (lock-queue:db-dat-get-db dbdat) "DELETE FROM runlocks WHERE run_lock='locked';"))
  (lock-queue:get-lock dbdat test-it))

;; returns #f if ok to skip the task
;; returns #t if ok to proceed with task
;; otherwise waits
;;
(define (lock-queue:wait-turn fname test-id #!key (count 10)(waiting-msg #f))
  (let* ((dbdat   (lock-queue:open-db fname))
	 (mystart (current-seconds))
	 (db      (lock-queue:db-dat-get-db dbdat)))
    (tasks:wait-on-journal (lock-queue:db-dat-get-path dbdat) 1200 waiting-msg: "lock-queue:wait-turn; waiting on journal file")
    (handle-exceptions
     exn
     (begin
       (debug:print 0 "WARNING: Failed to find out if it is ok to skip the wait queue. Will try again in few seconds")
       (debug:print 0 " message: " ((condition-property-accessor 'exn 'message) exn))
       (print-call-chain (current-error-port))
       (thread-sleep! 10)
       (if (> count 0)
	   (begin
	     (sqlite3:finalize! db)
	     (lock-queue:wait-turn fname test-id count: (- count 1)))
	   (begin
	     (debug:print 0 "Giving up calls to lock-queue:wait-turn for test-id " test-id " at path " fname ", printing call chain")
	     (print-call-chain (current-error-port))
	     #f)))
     ;; (tasks:wait-on-journal (lock-queue:db-dat-get-path dbdat) 1200 waiting-msg: "lock-queue:wait-turn; waiting on journal file")
     (sqlite3:execute
      db
      "INSERT OR REPLACE INTO queue (test_id,start_time,state) VALUES (?,?,'waiting');"
      test-id mystart)
     ;; (thread-sleep! 1) ;; give other tests a chance to register
     (let ((result 
	    (let loop ((younger-waiting (lock-queue:any-younger? dbdat mystart test-id)))
	      (if younger-waiting
		  (begin
		    ;; no need for us to wait. mark in the lock queue db as skipping
		    (lock-queue:set-state dbdat test-id "skipping")
		    #f) ;; let the calling process know that nothing needs to be done

		    (hash-table-delete! *db-local-sync* run-id)))
	      (mutex-unlock! *db-multi-sync-mutex*))
	    (hash-table-keys *db-local-sync*))
	   (if (and debug-mode
		    (> (- start-time last-time) 60))
	       (begin
		 (set! last-time start-time)
		 (debug:print-info 4 "timestamp -> " (seconds->time-string (current-seconds)) ", time since start -> " (seconds->hr-min-sec (- (current-seconds) *time-zero*))))))
	 
	 ;; keep going unless time to exit
	 ;;
	 (if (not *time-to-exit*)
	     (let delay-loop ((count 0))
	       (if (and (not *time-to-exit*)
			(< count 11)) ;; aprox 5-6 seconds

	     (test-data    (hash-table-ref/default testdat test-id #f))
	     (run-id       (db:test-get-run_id test-data))
	     (targ/runname (hash-table-ref/default (dboard:data-get-run-keys *data*) 
						   run-id
						   '()))
	     (target       (if (null? targ/runname) "" (string-intersperse (reverse (cdr (reverse targ/runname))) "/")))
	     (runname      (if (null? targ/runname) "" (car (cdr targ/runname))))
	     (steps-dat    (tests:get-compressed-steps *dbstruct-local* run-id test-id)))
				
	(if test-data
	    (begin
	      ;; 
	      (for-each 
	       (lambda (data)
		 (let ((mat    (car data))

;; If given work area 
;;  1. Find the testdat.db file
;;  2. Open the testdat.db file and do the query
;; If not given the work area
;;  1. Do a remote call to get the test path
;;  2. Continue as above
;; 
;;(define (rmt:get-steps-for-test run-id test-id)
;;  (rmt:send-receive 'get-steps-data run-id (list test-id)))

(define (rmt:teststep-set-status! run-id test-id teststep-name state-in status-in comment logfile)
  (let* ((state     (items:check-valid-items "state" state-in))
	 (status    (items:check-valid-items "status" status-in)))
    (if (or (not state)(not status))
	(debug:print 3 "WARNING: Invalid " (if status "status" "state")
		     " value \"" (if status state-in status-in) "\", update your validvalues section in megatest.config"))
    (rmt:send-receive 'teststep-set-status! run-id (list run-id test-id teststep-name state-in status-in comment logfile))))

(define (rmt:get-steps-for-test run-id test-id)
  (rmt:send-receive 'get-steps-for-test run-id (list run-id test-id)))

;;======================================================================
;;  T E S T   D A T A 
;;======================================================================

(define (rmt:read-test-data run-id test-id categorypatt #!key (work-area #f)) 
  (let ((tdb  (rmt:open-test-db-by-test-id run-id test-id work-area: work-area)))

		      "\n can-run-more:    " can-run-more)

    (cond
     ;; all prereqs met, fire off the test
     ;; or, if it is a 'toplevel test and all prereqs not met are COMPLETED then launch

     ((and (not (member 'toplevel testmode))
	   (member (hash-table-ref/default test-registry (db:test-make-full-name hed item-path) 'n/a)
		   '(DONOTRUN removed CANNOTRUN))) ;; *common:cant-run-states-sym*) ;; '(COMPLETED KILLED WAIVED UNKNOWN INCOMPLETE)) ;; try to catch repeat processing of COMPLETED tests here
      (debug:print-info 1 "Test " hed " set to \"" (hash-table-ref test-registry (db:test-make-full-name hed item-path)) "\". Removing it from the queue")
      (if (or (not (null? tal))
	      (not (null? reg)))
	  (list (runs:queue-next-hed tal reg reglen regfull)
		(runs:queue-next-tal tal reg reglen regfull)
		(runs:queue-next-reg tal reg reglen regfull)
		reruns)
	  (begin

		(runs:queue-next-tal tal reg reglen regfull)
		(runs:queue-next-reg tal reg reglen regfull)
		reruns)
	  #f))
     
     ;; Register tests 
     ;;
     ((not (hash-table-ref/default test-registry (db:test-make-full-name test-name item-path) #f))
      (debug:print-info 4 "Pre-registering test " test-name "/" item-path " to create placeholder" )
      ;; always do firm registration now in v1.60 and greater ;; (eq? *transport-type* 'fs) ;; no point in parallel registration if use fs
      (let register-loop ((numtries 15))
	(rmt:general-call 'register-test run-id run-id test-name item-path)
	(thread-sleep! 0.5)
	(if (rmt:get-test-id run-id test-name item-path)
	    (hash-table-set! test-registry (db:test-make-full-name test-name item-path) 'done)
	    (if (> numtries 0)
		(register-loop (- numtries 1))
		(debug:print 0 "ERROR: failed to register test " (db:test-make-full-name test-name item-path)))))
      (if (not (eq? (hash-table-ref/default test-registry (db:test-make-full-name test-name "") #f) 'done))
	  (begin
	    (rmt:general-call 'register-test run-id run-id test-name "")
	    (if (rmt:get-test-id run-id test-name "")
		(hash-table-set! test-registry (db:test-make-full-name test-name "") 'done))))
      (runs:shrink-can-run-more-tests-count)   ;; DELAY TWEAKER (still needed?)
      (if (and (null? tal)(null? reg))
	  (list hed tal (append reg (list hed)) reruns)
	  (list (runs:queue-next-hed tal reg reglen regfull)
		(runs:queue-next-tal tal reg reglen regfull)
		;; NB// Here we are building reg as we register tests
		;; if regfull we must pop the front item off reg
		(if regfull
		    (append (cdr reg) (list hed))
		    (append reg (list hed)))
		reruns)))
     
     ;; At this point hed test registration must be completed.
     ;;
     ((eq? (hash-table-ref/default test-registry (db:test-make-full-name test-name item-path) #f)
	   'start)
      (debug:print-info 0 "Waiting on test registration(s): "
			(string-intersperse 
			 (filter (lambda (x)
				   (eq? (hash-table-ref/default test-registry x #f) 'start))
				 (hash-table-keys test-registry))
			 ", "))

     
     ;; This is the final stage, everything is in place so launch the test
     ;;
     ((and have-resources
	   (or (null? prereqs-not-met)
	       (and (eq? testmode 'toplevel)
		    (null? non-completed))))
      ;; (hash-table-delete! *max-tries-hash* (db:test-make-full-name test-name item-path))
      ;; we are going to reset all the counters for test retries by setting a new hash table
      ;; this means they will increment only when nothing can be run
      (set! *max-tries-hash* (make-hash-table))
      ;; well, first lets see if cpu load throttling is enabled. If so wait around until the
      ;; average cpu load is under the threshold before continuing
      (if (configf:lookup *configdat* "jobtools" "maxload") ;; only gate if maxload is specified
	  (common:wait-for-cpuload maxload numcpus waitdelay))
      (run:test run-id run-info keyvals runname test-record flags #f test-registry all-tests-registry)
      (hash-table-set! test-registry (db:test-make-full-name test-name item-path) 'running)
      (runs:shrink-can-run-more-tests-count)  ;; DELAY TWEAKER (still needed?)
      ;; (thread-sleep! *global-delta*)
      (if (or (not (null? tal))(not (null? reg)))
	  (list (runs:queue-next-hed tal reg reglen regfull)
		(runs:queue-next-tal tal reg reglen regfull)
		(runs:queue-next-reg tal reg reglen regfull)
		reruns)

				 " from the launch list as it has prerequistes that are FAIL")
		    (let ((test-id (rmt:get-test-id run-id hed "")))
		      (if test-id (mt:test-set-state-status-by-id run-id test-id "NOT_STARTED" "PREQ_FAIL" "Failed to run due to failed prerequisites")))
		    (runs:shrink-can-run-more-tests-count) ;; DELAY TWEAKER (still needed?)
		    ;; (thread-sleep! *global-delta*)
		    ;; This next is for the items
		    (mt:test-set-state-status-by-testname run-id test-name item-path "NOT_STARTED" "BLOCKED" #f)
		    (hash-table-set! test-registry (db:test-make-full-name test-name item-path) 'removed)
		    (list (runs:queue-next-hed tal reg reglen regfull)
			  (runs:queue-next-tal tal reg reglen regfull)
			  (runs:queue-next-reg tal reg reglen regfull)
			  reruns ;; WAS: (cons hed reruns) ;; but that makes no sense?
			  ))
		  (let ((nth-try (hash-table-ref/default test-registry hed 0)))
		    (cond

    ;; convert state to symbol and use that as the hash value
    (for-each (lambda (trec)
		(let ((id (db:test-get-id        trec))
		      (tn (db:test-get-testname  trec))
		      (ip (db:test-get-item-path trec))
		      (st (db:test-get-state     trec)))
		  (if (not (equal? st "DELETED"))
		      (hash-table-set! test-registry (db:test-make-full-name tn ip) (string->symbol st)))))
	      tests-info)
    (set! max-retries (if (and max-retries (string->number max-retries))(string->number max-retries) 100))

    (let loop ((hed         (car sorted-test-names))
	       (tal         (cdr sorted-test-names))
	       (reg         '()) ;; registered, put these at the head of tal 
	       (reruns      '()))

			    (if m (map string->symbol (string-split m)) '(normal))))
	     (itemmap     (configf:lookup tconfig "requirements" "itemmap"))
	     (waitons     (tests:testqueue-get-waitons    test-record))
	     (priority    (tests:testqueue-get-priority   test-record))
	     (itemdat     (tests:testqueue-get-itemdat    test-record)) ;; itemdat can be a string, list or #f
	     (items       (tests:testqueue-get-items      test-record))
	     (item-path   (item-list->path itemdat))
	     (tfullname   (db:test-make-full-name test-name item-path))
	     (newtal      (append tal (list hed)))
	     (regfull     (>= (length reg) reglen))
	     (num-running (rmt:get-count-tests-running-for-run-id run-id)))

	;; every couple minutes verify the server is there for this run
	(if (and (common:low-noise-print 60 "try start server"  run-id)
		 (tasks:need-server run-id))
	    (tasks:start-and-wait-for-server tdbdat run-id 10)) ;; NOTE: delay and wait is done under the hood
	
	(if (> num-running 0)
	  (set! last-time-some-running (current-seconds)))

      (if (> (current-seconds)(+ last-time-some-running 240))
	  (hash-table-set! *max-tries-hash* tfullname (+ (hash-table-ref/default *max-tries-hash* tfullname 0) 1)))
	;; (debug:print 0 "max-tries-hash: " (hash-table->alist *max-tries-hash*))

	;; Ensure all top level tests get registered. This way they show up as "NOT_STARTED" on the dashboard
	;; and it is clear they *should* have run but did not.
	(if (not (hash-table-ref/default test-registry (db:test-make-full-name test-name "") #f))
	    (begin
	      (rmt:general-call 'register-test run-id run-id test-name "")
	      (hash-table-set! test-registry (db:test-make-full-name test-name "") 'done)))
	
	;; Fast skip of tests that are already "COMPLETED" - NO! Cannot do that as the items may not have been expanded yet :(
	;;
	(if (member (hash-table-ref/default test-registry tfullname #f) 
		    '(DONOTRUN removed)) ;; *common:cant-run-states-sym*) ;; '(COMPLETED KILLED WAIVED UNKNOWN INCOMPLETE))
	    (begin
	      (if (runs:lownoise (conc "been marked do not run " tfullname) 60)

	  (for-each
	   (lambda (my-itemdat)
	     (let* ((new-test-record (let ((newrec (make-tests:testqueue)))
				       (vector-copy! test-record newrec)
				       newrec))
		    (my-item-path (item-list->path my-itemdat)))
	       (if (tests:match test-patts hed my-item-path required: required-tests) ;; (patt-list-match my-item-path item-patts)           ;; yes, we want to process this item, NOTE: Should not need this check here!
		   (let ((newtestname (db:test-make-full-name hed my-item-path)))    ;; test names are unique on testname/item-path
		     (tests:testqueue-set-items!     new-test-record #f)
		     (tests:testqueue-set-itemdat!   new-test-record my-itemdat)
		     (tests:testqueue-set-item_path! new-test-record my-item-path)
		     (hash-table-set! test-records newtestname new-test-record)
		     (set! tal (append tal (list newtestname))))))) ;; since these are itemized create new test names testname/itempath
	   items)

(define (runs:pretty-string lst)
  (map (lambda (t)
	 (if (not (vector? t))
	     (conc t)
	     (conc (db:test-get-testname t) ":" (db:test-get-state t) "/" (db:test-get-status t))))
       lst))




;; parent-test is there as a placeholder for when parent-tests can be run as a setup step
(define (run:test run-id run-info keyvals runname test-record flags parent-test test-registry all-tests-registry)
  ;; All these vars might be referenced by the testconfig file reader
  (let* ((test-name    (tests:testqueue-get-testname   test-record))
	 (test-waitons (tests:testqueue-get-waitons    test-record))
	 (test-conf    (tests:testqueue-get-testconfig test-record))
	 (itemdat      (tests:testqueue-get-itemdat    test-record))
	 (test-path    (hash-table-ref all-tests-registry test-name)) ;; (conc *toppath* "/tests/" test-name)) ;; could use tests:get-testconfig here ...
	 (force        (hash-table-ref/default flags "-force" #f))
	 (rerun        (hash-table-ref/default flags "-rerun" #f))
	 (keepgoing    (hash-table-ref/default flags "-keepgoing" #f))
	 (incomplete-timeout (string->number (or (configf:lookup *configdat* "setup" "incomplete-timeout") "x")))
	 (item-path     "")
	 (db           #f)
	 (full-test-name #f))

    ;; setting itemdat to a list if it is #f
    (if (not itemdat)(set! itemdat '()))
    (set! item-path (item-list->path itemdat))
    (set! full-test-name (db:test-make-full-name test-name item-path))
    (debug:print-info 4
		      "\nTESTNAME: " full-test-name 
		      "\n   test-config: " (hash-table->alist test-conf)
		      "\n   itemdat: " itemdat
		      )
    (debug:print 2 "Attempting to launch test " full-test-name)
    (setenv "MT_TEST_NAME" test-name) ;; 

		     (if (not (launch-test test-id run-id run-info keyvals runname test-conf test-name test-path itemdat flags))
			 (begin
			   (print "ERROR: Failed to launch the test. Exiting as soon as possible")
			   (set! *globalexitstatus* 1) ;; 
			   (process-signal (current-process-id) signal/kill))))))))
	((KILLED) 
	 (debug:print 1 "NOTE: " full-test-name " is already running or was explictly killed, use -force to launch it.")
	 (hash-table-set! test-registry (db:test-make-full-name test-name test-path) 'DONOTRUN)) ;; KILLED))
	((LAUNCHED REMOTEHOSTSTART RUNNING)  
	 (debug:print 2 "NOTE: " test-name " is already running"))
	;; (if (> (- (current-seconds)(+ (db:test-get-event_time testdat)
	;; 			       (db:test-get-run_duration testdat)))
	;; 	(or incomplete-timeout
	;; 	    6000)) ;; i.e. no update for more than 6000 seconds
	;;      (begin
	;;        (debug:print 0 "WARNING: Test " test-name " appears to be dead. Forcing it to state INCOMPLETE and status STUCK/DEAD")
	;;        (tests:test-set-status! run-id test-id "INCOMPLETE" "STUCK/DEAD" "" #f))
	;;        ;; (tests:test-set-status! test-id "INCOMPLETE" "STUCK/DEAD" "" #f))
	;;      (debug:print 2 "NOTE: " test-name " is already running")))
	(else      
	 (debug:print 0 "ERROR: Failed to launch test " full-test-name ". Unrecognised state " (test:get-state testdat))
	 (case (string->symbol (test:get-state testdat)) 
	   ((COMPLETED INCOMPLETE)
	    (hash-table-set! test-registry (db:test-make-full-name test-name test-path) 'DONOTRUN))
	   (else
	    (hash-table-set! test-registry (db:test-make-full-name test-name test-path) 'DONOTRUN))))))))

;;======================================================================
;; END OF NEW STUFF
;;======================================================================

(define (get-dir-up-n dir . params) 
  (let ((dparts  (string-split dir "/"))

;;======================================================================
;; Tests
;;======================================================================

(use sqlite3 srfi-1 posix regex regex-case srfi-69 dot-locking tcp directory-utils)
(import (prefix sqlite3 sqlite3:))
(require-library stml)

(declare (unit tests))
(declare (uses lock-queue))
(declare (uses db))
(declare (uses tdb))
(declare (uses common))
;; (declare (uses dcommon)) ;; needed for the steps processing
(declare (uses items))
(declare (uses runconfig))
;; (declare (uses sdb))

(include "common_records.scm")
(include "key_records.scm")
(include "db_records.scm")

			       (status         (vector-ref testrecord 3))
			       (run_duration   (vector-ref testrecord 4))
			       (logf           (vector-ref testrecord 5))
			       (comment        (vector-ref testrecord 6)))
			   (hash-table-set! counts status (+ 1 (hash-table-ref/default counts status 0)))
			   (hash-table-set! statecounts state (+ 1 (hash-table-ref/default statecounts state 0)))
			   (set! outtxt (conc outtxt "<tr>"
					      ;; "<td><a href=\"" itempath "/" logf "\"> " itempath "</a></td>" 
					      "<td><a href=\"" itempath "/test-summary.html\"> " itempath "</a></td>" 
					      "<td>" state    "</td>" 
					      "<td><font color=" (common:get-color-from-status status)
					      ">"   status   "</font></td>"
					      "<td>" (if (equal? comment "")
							 "&nbsp;"
							 comment) "</td>"
							 "</tr>"))))

		  (close-output-port oup)
		  (lock-queue:release-lock outputfilename test-id)
		  (change-directory orig-dir)
		  ;; NB// tests:test-set-toplog! is remote internal...
		  (tests:test-set-toplog! run-id test-name outputfilename)
		  )))))))

;; CHECK - WAS THIS ADDED OR REMOVED? MANUAL MERGE WITH API STUFF!!!
;;
;; get a pretty table to summarize steps
;;
;; (define (dcommon:process-steps-table steps);; db test-id #!key (work-area #f))
(define (tests:process-steps-table steps);; db test-id #!key (work-area #f))
;;  (let ((steps   (db:get-steps-for-test db test-id work-area: work-area)))
    ;; organise the steps for better readability
    (let ((res (make-hash-table)))
      (for-each 
       (lambda (step)
	 (debug:print 6 "step=" step)
	 (let ((record (hash-table-ref/default 
			res 
			(tdb:step-get-stepname step) 
			;;        stepname                start end status Duration  Logfile 
			(vector (tdb:step-get-stepname step) ""   "" ""     ""        ""))))
	   (debug:print 6 "record(before) = " record 
			"\nid:       " (tdb:step-get-id step)
			"\nstepname: " (tdb:step-get-stepname step)
			"\nstate:    " (tdb:step-get-state step)
			"\nstatus:   " (tdb:step-get-status step)
			"\ntime:     " (tdb:step-get-event_time step))
	   (case (string->symbol (tdb:step-get-state step))
	     ((start)(vector-set! record 1 (tdb:step-get-event_time step))
	      (vector-set! record 3 (if (equal? (vector-ref record 3) "")
					(tdb:step-get-status step)))
	      (if (> (string-length (tdb:step-get-logfile step))
		     0)
		  (vector-set! record 5 (tdb:step-get-logfile step))))
	     ((end)  
	      (vector-set! record 2 (any->number (tdb:step-get-event_time step)))
	      (vector-set! record 3 (tdb:step-get-status step))
	      (vector-set! record 4 (let ((startt (any->number (vector-ref record 1)))
					  (endt   (any->number (vector-ref record 2))))
				      (debug:print 4 "record[1]=" (vector-ref record 1) 
						   ", startt=" startt ", endt=" endt
						   ", get-status: " (tdb:step-get-status step))
				      (if (and (number? startt)(number? endt))
					  (seconds->hr-min-sec (- endt startt)) "-1")))
	      (if (> (string-length (tdb:step-get-logfile step))
		     0)
		  (vector-set! record 5 (tdb:step-get-logfile step))))
	     (else
	      (vector-set! record 2 (tdb:step-get-state step))
	      (vector-set! record 3 (tdb:step-get-status step))
	      (vector-set! record 4 (tdb:step-get-event_time step))))
	   (hash-table-set! res (tdb:step-get-stepname step) record)
	   (debug:print 6 "record(after)  = " record 
			"\nid:       " (tdb:step-get-id step)
			"\nstepname: " (tdb:step-get-stepname step)
			"\nstate:    " (tdb:step-get-state step)
			"\nstatus:   " (tdb:step-get-status step)
			"\ntime:     " (tdb:step-get-event_time step))))
       ;; (else   (vector-set! record 1 (tdb:step-get-event_time step)))
       (sort steps (lambda (a b)
		     (cond
		      ((<   (tdb:step-get-event_time a)(tdb:step-get-event_time b)) #t)
		      ((eq? (tdb:step-get-event_time a)(tdb:step-get-event_time b)) 
		       (<   (tdb:step-get-id a)        (tdb:step-get-id b)))
		      (else #f)))))
      res))


;; temporarily passing in dbstruct to support direct access (i.e. bypassing servers)
;;
(define (tests:get-compressed-steps dbstruct run-id test-id)
  (let* ((steps-data  (if dbstruct 
			  (db:get-steps-for-test dbstruct run-id test-id)
			  (rmt:get-steps-for-test run-id test-id))) 
	 (comprsteps  (tests:process-steps-table steps-data))) ;; (open-run-close db:get-steps-table #f test-id work-area: work-area)))
    (map (lambda (x)
	   ;; take advantage of the \n on time->string
	   (vector
	    (vector-ref x 0)
	    (let ((s (vector-ref x 1)))
	      (if (number? s)(seconds->time-string s) s))
	    (let ((s (vector-ref x 2)))
	      (if (number? s)(seconds->time-string s) s))
	    (vector-ref x 3)    ;; status
	    (vector-ref x 4)
	    (vector-ref x 5)))  ;; time delta
	 (sort (hash-table-values comprsteps)
	       (lambda (a b)
		 (let ((time-a (vector-ref a 1))
		       (time-b (vector-ref b 1)))
		   (if (and (number? time-a)(number? time-b))
		       (if (< time-a time-b)
			   #t
			   (if (eq? time-a time-b)
			       (string<? (conc (vector-ref a 2))
					 (conc (vector-ref b 2)))
			       #f))
		       (string<? (conc time-a)(conc time-b)))))))))


;; summarize test
(define (tests:summarize-test run-id test-id)
  (let* ((test-dat  (rmt:get-test-info-by-id run-id test-id))
	 (steps-dat (rmt:get-steps-for-test run-id test-id))
	 (test-name (db:test-get-testname test-dat))
	 (item-path (db:test-get-item-path test-dat))
	 (full-name (db:test-make-full-name test-name item-path))
	 (oup       (open-output-file (conc (db:test-get-rundir test-dat) "/test-summary.html")))
	 (status    (db:test-get-status   test-dat))
	 (color     (common:get-color-from-status status))
	 (logf      (db:test-get-final_logf test-dat))
	 (steps-dat (tests:get-compressed-steps #f run-id test-id)))
    ;; (dcommon:get-compressed-steps #f 1 30045)
    ;; (#("wasting_time" "23:36:13" "23:36:21" "0" "8.0s" "wasting_time.log"))

    (s:output-new
     oup
     (s:html
      (s:title "Summary for " full-name)
      (s:body 
       (s:h2 "Summary for " full-name)
       (s:table 'cellspacing "0" 'border "1"
	(s:tr (s:td "run id")   (s:td (db:test-get-run_id   test-dat))
	      (s:td "test id")  (s:td (db:test-get-id       test-dat)))
	(s:tr (s:td "testname") (s:td test-name)
	      (s:td "itempath") (s:td item-path))
	(s:tr (s:td "state")    (s:td (db:test-get-state    test-dat))
	      (s:td "status")   (s:td (s:a 'href logf (s:font 'color color status))))
	(s:tr (s:td "TestDate") (s:td (seconds->work-week/day-time 
				       (db:test-get-event_time test-dat)))
	      (s:td "Duration") (s:td (seconds->hr-min-sec (db:test-get-run_duration test-dat)))))
       (s:h3 "Log files")
       (s:table
	'cellspacing "0" 'border "1"
	(s:tr (s:td "Final log")(s:td (s:a 'href logf logf))))
       (s:table
	'cellspacing "0" 'border "1"
	(s:tr (s:td "Step Name")(s:td "Start")(s:td "End")(s:td "Status")(s:td "Duration")(s:td "Log File"))
	(map (lambda (step-dat)
	       (s:tr (s:td (tdb:steps-table-get-stepname step-dat))
		     (s:td (tdb:steps-table-get-start    step-dat))
		     (s:td (tdb:steps-table-get-end      step-dat))
		     (s:td (tdb:steps-table-get-status   step-dat))
		     (s:td (tdb:steps-table-get-runtime  step-dat))
		     (s:td (let ((step-log (tdb:steps-table-get-log-file step-dat)))
			     (s:a 'href step-log step-log)))))
	     steps-dat))
	)))
    (close-output-port oup)))
	  
	  
;; MUST BE CALLED local!
;;
(define (tests:test-get-paths-matching keynames target fnamepatt #!key (res '()))
  ;; BUG: Move the values derived from args to parameters and push to megatest.scm
  (let* ((testpatt   (if (args:get-arg "-testpatt")(args:get-arg "-testpatt") "%"))
	 (statepatt  (if (args:get-arg ":state")   (args:get-arg ":state")    "%"))
	 (statuspatt (if (args:get-arg ":status")  (args:get-arg ":status")   "%"))

# override the logview command
#
logviewer (%MTCMD%) 2> /dev/null > /dev/null

# override the html viewer launch command
#
# htmlviewercmd firefox -new-window 
htmlviewercmd arora

# -runtests automatically deletes the records for tests with the listed states on starting up a run allowing them to re-run
#     (nb// this is in addition to NOT_STARTED which is automatically re-run)
#
allow-auto-rerun INCOMPLETE ZERO_ITEMS
# could add: STUCK STUCK/DEAD UNKNOWN KILLED KILLREQ PREQ_DISCARD

(expect:error in "LogFileBody" = 0 "a file that should never exist" #/what a dumb filename this is/)

(expect:error in "LogFileBody" = 0 "a file that should never exist" #/what a dumb filename this is/)

(expect:error in "LogFileBody" = 0 "a file that should never exist" #/what a dumb filename this is/)

(expect:error in "LogFileBody" = 0 "a file that should never exist" #/what a dumb filename this is/)

(expect:error in "LogFileBody" = 0 "a file that should never exist" #/what a dumb filename this is/)

(expect:error in "LogFileBody" = 0 "a file that should never exist" #/what a dumb filename this is/)

(expect:error in "LogFileBody" = 0 "a file that should never exist" #/what a dumb filename this is/)

(expect:error in "LogFileBody" = 0 "a file that should never exist" #/what a dumb filename this is/)

(expect:error in "LogFileBody" = 0 "a file that should never exist" #/what a dumb filename this is/)

$(PREFIX)/lib/nanomsg.so : $(PREFIX)/bin/nanocat
	CSC_OPTIONS="-I$(PREFIX)/include -L$(PREFIX)/lib" $(CHICKEN_INSTALL) $(PROX) nanomsg

#======================================================================
# M A T T S   U T I L S
#======================================================================

# opensrc

opensrc.fossil :
	fossil clone http://www.kiatoa.com/fossils/opensrc opensrc.fossil

opensrc/histstore/histstore.scm : opensrc.fossil
	mkdir -p opensrc
	cd opensrc;fossil open ../opensrc.fossil

opensrc/histstore/hs : opensrc/histstore/histstore.scm chkn eggs $(PREFIX)/lib/sqlite3.so 
	cd opensrc/histstore;$(PREFIX)/bin/csc histstore.scm -o hs

$(PREFIX)/bin/hs : opensrc/histstore/hs 
	cp -f opensrc/histstore/hs $(PREFIX)/bin/hs

# stml
stml.fossil :
	fossil clone http://www.kiatoa.com/fossils/stml stml.fossil

stml/stml.scm : stml.fossil
	mkdir -p stml
	cd stml;fossil open ../stml.fossil

$(PREFIX)/lib/stml.so
	cd stml;chicken-install

#======================================================================
# I U P 
#======================================================================

ffcall.fossil :
	fossil clone http://www.kiatoa.com/fossils/ffcall ffcall.fossil