Megatest

          $(PREFIX)/bin/.$(ARCHSTR)/dboard $(PREFIX)/bin/dashboard $(HELPERS) $(PREFIX)/bin/nbfake \
	  $(PREFIX)/bin/nbfind $(PREFIX)/bin/loadrunner $(PREFIX)/bin/mt_xterm \
          $(PREFIX)/bin/newdashboard $(PREFIX)/bin/mdboard

$(PREFIX)/bin/.$(ARCHSTR) : 
	mkdir -p $(PREFIX)/bin/.$(ARCHSTR)

test: ext-tests/.fslckout
	cd ext-tests;csi -I .. -b -n tests.scm

ext-tests/.fslckout : $(MTQA_FOSSIL)
	mkdir -p ext-tests
	cd ext-tests;fossil open --nested $(MTQA_FOSSIL)

$(MTQA_FOSSIL) :
	fossil clone https://www.kiatoa.com/fossils/megatest_qa $(MTQA_FOSSIL)

clean : 
	rm -f $(OFILES) $(GOFILES) megatest dboard dboard.o megatest.o dashboard.o

#
# run some tests

BINPATH   = $(shell readlink -m $(PWD)/../bin)
MEGATEST  = $(BINPATH)/megatest
DASHBOARD = $(BINPATH)/dashboard
PATH     := $(BINPATH):$(PATH)
RUNNAME  := $(shell date +w%V.%u.%H.%M)
IPADDR   := "-"
RUNID    := 1
SERVER    = 
DEBUG     = 1
LOGGING   = 
ROWS      = 20

OS  = $(shell grep ID /etc/*-release|cut -d= -f2)
FS  = $(shell df -T .|tail -1|awk '{print $$2}')
VER = $(shell fsl info|grep checkout|awk '{print $$2}'|cut -c 1-5)

# The NEWTARGET causes some tests to fail. Do not use until this is fixed.
NEWTARGET  = "$(OS)/$(FS)/$(VER)"
TARGET     = "ubuntu/nfs/none"

all : build unit test1 test2 test3 test4 test5 test6 test7 test8 test9

unit : basicserver.log runs.log misc.log

rel : 
	cd release;dashboard -rows 25 &

## basicserver.log : unittests/basicserver.scm
## 	script -c "./rununittest.sh basicserver $(DEBUG)" basicserver.log

%.log : build unittests/%.scm
	script -c "./rununittest.sh $* $(DEBUG)" $*.log
	if logpro unit.logpro $*.html < $*.log > /dev/null;then echo ALLPASS;else echo ALLFAIL;mv $*.log $*.log.FAIL;fi

server :
	cd fullrun;$(MEGATEST) -server - -debug $(DEBUG) -run-id $(RUNID)

stopserver :
	cd fullrun;$(MEGATEST) -stop-server 0

repl :
	cd fullrun;$(MEGATEST) -:b -repl

test0 : cleanprep
	cd simplerun ; $(MEGATEST) -server - -debug $(DEBUG)

test1 : cleanprep

test2 : fullprep
	cd fullrun;$(MEGATEST) -preclean -runtests ez_pass,runfirst/a/% -reqtarg ubuntu/nfs/none :runname $(RUNNAME) -debug $(DEBUG) $(LOGGING)
	cd fullrun;megatest -preclean -runtests % -target ubuntu/nfs/none :runname $(RUNNAME)_01 -testpatt %/,%/ai -debug $(DEBUG)
	cd fullrun;megatest -preclean -runtests %/,%/ai -target ubuntu/nfs/none :runname $(RUNAME)_02 -debug $(DEBUG)
	cd fullrun;megatest -preclean -runtests runfirst/%,%/ai -target ubuntu/nfs/none :runname $(RUNNAME)_02 -debug $(DEBUG)
	cd fullrun;megatest -runtests %/,%/winter -target ubuntu/nfs/none :runname $(RUNNAME)_03  -debug $(DEBUG)
	sleep 40;cd fullrun;megatest -target ubuntu/nfs/none :runname $(RUNNAME) -set-state-status COMPLETED,FORCED :state COMPLETED :status PASS -testpatt ez_p%s,runfirst/ -debug $(DEBUG) $(LOGGING)


test3 : fullprep test3a test3b

test3a :
	@echo Run runfirst and any waitons.
	cd fullrun;$(MEGATEST) -preclean -runtests runfirst -reqtarg ubuntu/nfs/none :runname $(RUNNAME)_b 

test3b :
	@echo Run all_toplevel and all waitons
	cd fullrun;$(MEGATEST) -preclean -runtests all_toplevel -reqtarg ubuntu/nfs/none :runname $(RUNNAME)_c

test4 : cleanprep
	@echo "WARNING: No longer running fullprep, test converage may be lessened"
	cd fullrun;time $(MEGATEST) -debug $(DEBUG) -run-wait -runtests % -reqtarg ubuntu/nfs/none :runname $(RUNNAME)_b -m "This is a comment specific to a run" -v $(LOGGING)

test4a : cleanprep
	cd fullrun;time $(MEGATEST) -debug $(DEBUG) -preclean -runtests all_toplevel -reqtarg ubuntu/nfs/none :runname $(RUNNAME)_b -m "This is a comment specific to a run" -v $(LOGGING)

# NOTE: Only one instance can be a server
test5 : cleanprep
	rm -f fullrun/a*.log fullrun/logs/*
	@echo "WARNING: No longer running fullprep, test converage may be lessened"
	cd fullrun;sleep 0;$(MEGATEST) -preclean -runtests % -target $(TARGET) :runname $(RUNNAME)_aa -debug $(DEBUG) $(LOGGING) > aa.log 2> aa.log &
	cd fullrun;sleep 0;$(MEGATEST) -preclean -runtests % -target ubuntu/nfs/sleep1 :runname $(RUNNAME)_ae -debug $(DEBUG) $(LOGGING) > ae.log 2> ae.log &	
	cd fullrun;sleep 0;$(MEGATEST) -preclean -runtests % -target ubuntu/nfs/sleep10 :runname $(RUNNAME)_ab -debug $(DEBUG) $(LOGGING) > ab.log 2> ab.log &
	cd fullrun;sleep 5;$(MEGATEST) -preclean -runtests % -target ubuntu/nfs/sleep60 :runname $(RUNNAME)_ac -debug $(DEBUG) $(LOGGING) > ac.log 2> ac.log &
	cd fullrun;sleep 8;$(MEGATEST) -preclean -runtests % -target ubuntu/nfs/sleep240 :runname $(RUNNAME)_ad -debug $(DEBUG) $(LOGGING) > ad.log 2> ad.log &	
#	cd fullrun;sleep 0;$(MEGATEST) -preclean -runtests % -target $(TARGET) :runname $(RUNNAME)_af -debug $(DEBUG) $(LOGGING) > af.log 2> af.log &

# MUST ADD THIS BACK IN ASAP!!!!
	# cd fullrun;sleep 10;$(MEGATEST) -run-wait  -target $(TARGET) :runname % -testpatt % :state RUNNING,LAUNCHED,NOT_STARTED,REMOTEHOSTSTART;echo ALL DONE

test6: fullprep
	cd fullrun;$(MEGATEST) -preclean -runtests runfirst -testpatt %/1 -reqtarg ubuntu/nfs/none :runname $(RUNNAME)_itempatt -v
	cd fullrun;$(MEGATEST) -preclean -runtests runfirst -testpatt %blahha% -reqtarg ubuntu/nfs/none :runname $(RUNNAME)_itempatt -debug 10
	cd fullrun;$(MEGATEST) -rollup :runname newrun -target ubuntu/nfs/none -debug 10

test7: 
	@echo Only a/c testname c should remain. If there is a run a/b/c then there is a cache issue.
	cd simplerun;$(DASHBOARD) &
	(cd simplerun; \
	 $(MEGATEST) -server - -daemonize; \
         $(MEGATEST) -remove-runs -target %/% :runname % -testpatt %; \
         $(MEGATEST) -preclean -runtests %  -target a/b :runname c; sleep 5; \
	 $(MEGATEST) -remove-runs -target a/c :runname c; \
	 $(MEGATEST) -preclean -runtests %  -target a/c :runname c; \
	 $(MEGATEST) -remove-runs -target a/b :runname c -testpatt % ; \
	 $(MEGATEST) -preclean -runtests %  -target a/d :runname c;$(MEGATEST) -list-runs %|egrep ^Run:) > test7.log 2> test7.log 
	logpro test7.logpro test7.html < test7.log
	@echo 
	@echo Run \"firefox test7.html\" to see the results.

# This one failed with v1.55
test8a : 
	cd fullrun;$(MEGATEST) -preclean -runtests priority_10_waiton_1 -target ubuntu/nfs/none :runname $(RUNNAME)_waiton_single

test8 : test8a
	cd fullrun;$(MEGATEST) -preclean -runtests lineitem_fail 1 -target ubuntu/nfs/none :runname $(RUNNAME)_singletest
	cd fullrun;$(MEGATEST) -preclean -runtests runfirst/fall 1 -target ubuntu/nfs/none :runname $(RUNNAME)_singleitem
	cd fullrun;$(MEGATEST) -preclean -runtests test_mt_vars/2 -target ubuntu/nfs/none :runname $(RUNNAME)_singleitem_waiton

# Some simple checks for bootstrapping and run loop logic 

test9 : minsetup test9a test9b test9c test9d test9e

test9a :
	@echo Run super-simple mintest e, no waitons.
	cd mintest;$(DASHBOARD)&
	cd mintest;$(MEGATEST) -preclean -runtests e -target $(VER) -runname $(shell date +%H.%M.%S) -debug $(DEBUG)

test9b :
	@echo Run simple mintest d with one waiton c
	cd mintest;$(MEGATEST) -preclean -runtests d -target $(VER) -runname `date +%H.%M.%S` -debug $(DEBUG)

test9c :
	@echo Run mintest a with full waiton chain a -> b -> c -> d -> e
	cd mintest;$(MEGATEST) -preclean -runtests a -target $(VER) -runname `date +%H.%M.%S` -debug $(DEBUG)

test9d :
	@echo Run an itemized test with no items
	cd mintest;$(MEGATEST) -preclean -runtests g -target $(VER) -runname `date +%H.%M.%S` -debug $(DEBUG)

test9e :
	@echo Run mintest a1 with full waiton chain with d1fail: a1 -> b1 -> c1 -> d1fail -> e1
	cd mintest;$(MEGATEST) -preclean -runtests a1 -target $(VER) -runname `date +%H.%M.%S` -debug $(DEBUG)

test10 :
	@echo Run a bunch of different targets simultaneously
	(cd fullrun;$(MEGATEST) -server - ;sleep 2)&
	for targ in mint/btrfs/mintdir sunos/sshfs/loc; do \
	   (cd fullrun;$(MEGATEST) -preclean -runtests priority_10_waiton_1 -target $$targ :runname $(RUNNAME) &); done
	for sys in ubuntu suse redhat debian;do \
	  for fs in afs nfs zfs; do \
	     for dpath in none tmp; do \
	        (cd fullrun;$(MEGATEST) -preclean -runtests priority_10_waiton_1 -target $$sys/$$fs/$$dpath :runname $(RUNNAME) &);\
	     done;done;done

test11 :
	 cd fullrun;time (for a in 1 2 3 4 5 6 7 8 9 10  1 2 3 4 5 6 7 8 9 10  1 2 3 4 5 6 7 8 9 10  1 2 3 4 5 6 7 8 9 10 ;do   (megatest -test-paths -target %/%/% > /dev/null ) & done; wait; )

build : ../*.scm
	cd ..;make -j && make install
	touch build

cleanstart :
	if killall mtest -v ;then sleep 5;killall mtest -v -9;fi;true
	killall mtest -v;if [ ! $$? ];then sleep 5;killall mtest -v -9;fi

minsetup : build
	mkdir -p mintest/runs mintest/links
	cd mintest;$(MEGATEST) -stop-server 0
	cd mintest;$(MEGATEST) -server - -debug $(DEBUG) > server.log 2> server.log & 
	sleep 3
	cd mintest;$(DASHBOARD) -rows 18 &

cleanprep : ../*.scm Makefile */*.config build
	mkdir -p fullrun/tmp/mt_runs fullrun/tmp/mt_links /tmp/$(USER)/adisk1
	rm -f */logging.db
	touch cleanprep

fullprep : cleanprep
	cd fullrun;$(MEGATEST) -remove-runs :runname $(RUNNAME)% -target %/%/% -testpatt %/%
	cd fullrun;$(BINPATH)/dashboard -rows 15 &

dashboard : cleanprep
	cd fullrun && $(BINPATH)/dashboard -rows $(ROWS) &

newdashboard : cleanprep
	cd fullrun && $(BINPATH)/newdashboard &

mdboard : cleanprep
	cd fullrun && $(BINPATH)/mdboard &

remove :
	cd fullrun;$(MEGATEST) -remove-runs :runname $(RUN)  -testpatt % -itempatt % :sysname % :fsname % :datapath %

clean  : 
	rm cleanprep

kill :
	killall -v mtest main.sh dboard || true
	rm -rf /tmp/.$(USER)-portlogger.db *run/db/* */megatest.db */logging.db */monitor.db fullrun/tmp/mt_*/* fullrun/tmp/mt_*/.db* fullrun/logs/*.log fullrun/*.log || true
	killall -v mtest dboard || true

hardkill : kill
	sleep 2;killall -v mtest main.sh dboard -9

listservers :
	cd fullrun;$(MEGATEST) -list-servers

runforever :
	while(ls); do runname=`date +%F-%R:%S`;(cd fullrun;$(MEGATEST) -runall -target ubuntu/nfs/none :runname $$runname;/home/matt/data/megatest/megatest -runall -target ubuntu/nfs/none :runname $$runname;/home/matt/data/megatest/megatest -runall -target ubuntu/nfs/none :runname $$runname);done

[ezsteps]
delay    sleep $SPEED;echo "Delayed $SPEED seconds"

# lookup table for waitons
#
[std]
genlib    setup
test1     genlib
aggregate test1
test2     aggregate
results   test2

# simple removes the challenging "aggregate" dependency between test1 and test2.
# and the itempatt irregularity from genlib -> test1
#
[simple]
test1     setup
test2     test1
results   test2

[test_meta]
author matt
owner  matt
description This is a common testconfig shared by all the tests

[logpro]
delay ;; Delay step logpro
  (expect:required in "LogFileBody" > 0 "Delayed message" #/Delayed \d+ seconds/)

reviewed 09/10/2011, by Matt

[requirements]
mode itemwait

[itemstable]
VIEW   layout layout layout schematic schematic schematic
CELL   ntran  ptran  diode  ntran     ptran     diode

[fields]
# this field changes the dep tree 
DEPS  TEXT

# this field changes the test run time; 0 .. N or random
SPEED TEXT

[dashboard]
pre-command  xterm -geometry 180x20 -e "
post-command |& tee results.log ;echo Press any key to continue;bash -c 'read -n 1 -s'" &
testsort -event_time

[misc]
home #{shell readlink -f $MT_RUN_AREA_HOME}
parent #{shell readlink -f $MT_RUN_AREA_HOME/..}

[setup]
linktree #{get misc parent}/links
max_concurrent_jobs 100000
# It is possible (but not recommended) to override the rsync command used
# to populate the test directories. For test development the following 
# example can be useful
#
testcopycmd cp --remove-destination -rsv TEST_SRC_PATH/. TEST_TARG_PATH/. >> TEST_TARG_PATH/mt_launch.log 2>> TEST_TARG_PATH/mt_launch.log

# or for hard links

# testcopycmd cp --remove-destination -rlv TEST_SRC_PATH/. TEST_TARG_PATH/.

# override the logview command
#
logviewer (%MTCMD%) 2> /dev/null > /dev/null

# override the html viewer launch command
#
# htmlviewercmd firefox -new-window 
htmlviewercmd arora

[env-override]
# MT_XTERM_CMD overrides the terminal command
# MT_XTERM_CMD xterm -bg lightgreen -fg black

## disks are:
## name host:/path/to/area
## -or-
## name /path/to/area
[disks]
disk0 #{get misc parent}/runs

#======================================================================
# Machine flavors
#
#   These specify lists of hosts or scripts to use or call for various
#   flavors of task.
#
#======================================================================

[flavors]

plain hosts: xena, phoebe
strong command: NBFAKE_HOST=zeus nbfake
arm hosts: cubian

# Uncomment these to emulate a job queue with a long time (look in bin/sleeprunner for the time)
[jobtools]
launcher nbfake
maxload 2.0

[default]

# [DEPS/SPEED]

[simple/0]

[std/0]

[include #{getenv MT_RUN_AREA_HOME}/common.testconfig]

[requirements]
waiton #{get #{getenv DEPS} aggregate}

[include #{getenv MT_RUN_AREA_HOME}/common.testconfig]

[itemstable]
VIEWTYPE layout schematic

[requirements]
waiton #{get #{getenv DEPS} genlib}
# itemmap /.*

[include #{getenv MT_RUN_AREA_HOME}/common.testconfig]

[requirements]
waiton #{get #{getenv DEPS} results}

[include #{getenv MT_RUN_AREA_HOME}/common.testconfig]

[include #{getenv MT_RUN_AREA_HOME}/common.testconfig]

[include #{getenv MT_RUN_AREA_HOME}/common_itemstable.testconfig]

[requirements]
waiton #{get #{getenv DEPS} test1}

# itemmap maps these items back to previous test
# NB// mapping is in reverse - NOT forwards!
#
itemmap /.*

[include #{getenv MT_RUN_AREA_HOME}/common.testconfig]

[include #{getenv MT_RUN_AREA_HOME}/common_itemstable.testconfig]

[requirements]
waiton #{get #{getenv DEPS} test2}

[ezsteps]
delay    sleep $SPEED;echo "Delayed $SPEED seconds"

[requirements]
#{getenv WAITON_#{getenv MT_TEST_NAME}}

[test_meta]
author matt
owner  matt
description This is a common testconfig shared by all the tests

[logpro]
delay ;; Delay step logpro
  (expect:required in "LogFileBody" > 0 "Delayed message" #/Delayed \d+ seconds/)

reviewed 09/10/2011, by Matt

[itemstable]
VIEW   layout layout layout schematic schematic schematic
CELL   ntran  ptran  diode  ntran     ptran     diode

[fields]
# this field changes the dep tree 
DEPS  TEXT

# this field changes the test run time; 0 .. N or random
SPEED TEXT

[dashboard]
pre-command  xterm -geometry 180x20 -e "
post-command |& tee results.log ;echo Press any key to continue;bash -c 'read -n 1 -s'" &
testsort -event_time

[misc]
home #{shell readlink -f $MT_RUN_AREA_HOME}
parent #{shell readlink -f $MT_RUN_AREA_HOME/..}

[setup]
linktree #{get misc parent}/links
max_concurrent_jobs 100000
# It is possible (but not recommended) to override the rsync command used
# to populate the test directories. For test development the following 
# example can be useful
#
testcopycmd cp --remove-destination -rsv TEST_SRC_PATH/. TEST_TARG_PATH/. >> TEST_TARG_PATH/mt_launch.log 2>> TEST_TARG_PATH/mt_launch.log

# or for hard links

# testcopycmd cp --remove-destination -rlv TEST_SRC_PATH/. TEST_TARG_PATH/.

# override the logview command
#
logviewer (%MTCMD%) 2> /dev/null > /dev/null

# override the html viewer launch command
#
# htmlviewercmd firefox -new-window 
htmlviewercmd arora

[env-override]
# MT_XTERM_CMD overrides the terminal command
# MT_XTERM_CMD xterm -bg lightgreen -fg black

## disks are:
## name host:/path/to/area
## -or-
## name /path/to/area
[disks]
disk0 #{get misc parent}/runs

#======================================================================
# Machine flavors
#
#   These specify lists of hosts or scripts to use or call for various
#   flavors of task.
#
#======================================================================

[flavors]

plain hosts: xena, phoebe
strong command: NBFAKE_HOST=zeus nbfake
arm hosts: cubian

# Uncomment these to emulate a job queue with a long time (look in bin/sleeprunner for the time)
[jobtools]
launcher nbfake
maxload 2.0

[default]
WAITON_setup
WAITON_genlib    waiton setup
WAITON_test1     waiton genlib
WAITON_aggregate waiton test1
WAITON_test2     waiton aggregate

# [DEPS/SPEED]

[std/0]

[include #{getenv MT_RUN_AREA_HOME}/common.testconfig]

[include #{getenv MT_RUN_AREA_HOME}/common.testconfig]

[itemstable]
VIEWTYPE layout schematic

[include #{getenv MT_RUN_AREA_HOME}/common.testconfig]

[include #{getenv MT_RUN_AREA_HOME}/common.testconfig]

[include #{getenv MT_RUN_AREA_HOME}/common.testconfig]

[include #{getenv MT_RUN_AREA_HOME}/common_itemstable.testconfig]

[include #{getenv MT_RUN_AREA_HOME}/common.testconfig]

[include #{getenv MT_RUN_AREA_HOME}/common_itemstable.testconfig]

[fields]
SYSTEM TEXT
RELEASE TEXT

[setup]
# Adjust max_concurrent_jobs to limit how much you load your machines
# max_concurrent_jobs 150
max_concurrent_jobs 1000

# This is your link path, you can move it but it is generally better to keep it stable
linktree #{shell readlink -f #{getenv MT_RUN_AREA_HOME}/../simplelinks}

[include testqa/configs/megatest.abc.config]

# timeout 0.025

[jobtools]
maxload 4
launcher nbfake

[server]
# timeout 0.01
# homehost xena
# homehost 143.182.225.38

# force server
server-query-threshold 0


[jobtools]
# launcher nbq -P ch_vp -C SLES11_EM64T_4G -Q /ciaf/fdk
launcher nbfake
maxload 4

# launcher bsub -q priority -o $MT_TEST_RUN_DIR/openlava.log 

BINDIR    = $(PWD)/../../../bin
PATH     := $(BINDIR):$(PATH)
MEGATEST  = $(BINDIR)/megatest
DASHBOARD = $(BINDIR)/dashboard
NEWDASHBOARD = $(BINDIR)/newdashboard
RUNNAME   = a
NUMTESTS  = 20

all :
	$(MEGATEST) -remove-runs -target a/b :runname c -testpatt %/%
	$(MEGATEST) -runtests % -target a/b :runname c

bigbig :
	for tn in a b c d;do \
	   ($(MEGATEST) -runtests % -target a/b :runname $tn & ) ; \
	done

waitonpatt :
	megatest -remove-runs -runname waitonpatt -target a/b -testpatt %
	NUMTESTS=15 megatest -run -target a/b -runname waitonpatt -testpatt bigrun3/%8

waitonall :
	megatest -remove-runs -runname waitonall -target a/b -testpatt %
	NUMTESTS=20 megatest -run -target a/b -runname waitonall -testpatt alltop

bigrun :
	NUMTESTS=$(NUMTESTS) $(MEGATEST) -runtests bigrun -target a/bigrun :runname a$(shell date +%V)

bigrun2 :
	NUMTESTS=$(NUMTESTS) $(MEGATEST) -runtests bigrun2 -target a/bigrun2 :runname a$(shell date +%V)

bigrun3 :
	NUMTESTS=$(NUMTESTS) $(MEGATEST) -runtests bigrun3 -target a/bigrun3 :runname $(RUNNAME)

dashboard : 
	mkdir -p ../simpleruns
	$(DASHBOARD) -rows 20 &

newdashboard :
	$(NEWDASHBOARD) &

compile :
	(cd ../../..;make -j && make install)

clean :
	rm -rf ../simple*/*/* megatest.db db/* ../simple*/.db/* logs/* monitor.db

set NUMTESTS to set the number of tests that will be run. A small number (say 20) illustrates itemwait well.

# Valid values for state and status for steps, NB// It is not recommended you use this
[validvalues]
state start end completed

# Job tools are more advanced ways to control how your jobs are launched
[jobtools]
# useshell yes

[include megatest.def.config]

# You can override environment variables for all your tests here
[env-override]
EXAMPLE_VAR example value

# As you run more tests you may need to add additional disks, the names are arbitrary but must be unique
[disks]
disk0 #{scheme (nice-path "#{getenv MT_RUN_AREA_HOME}/../simpleruns")}

[setup]
testcopycmd cp --remove-destination -rlv TEST_SRC_PATH/. TEST_TARG_PATH/. >> TEST_TARG_PATH/mt_launch.log 2>> TEST_TARG_PATH/mt_launch.log
# launchwait no

# All these are overridden in ../fdk.config
# [jobtools]
# launcher nbfake
# launcher bsub -q priority -o $MT_TEST_RUN_DIR/openlava.log 

[include ../fdk.config]

[default]
ALLTESTS see this variable

# Your variables here are grouped by targets [SYSTEM/RELEASE]
[SYSTEM_val/RELEASE_val]
ANOTHERVAR only defined if target is SYSTEM_val/RELEASE_val

#!/bin/bash

(cd ../../..;make && make install) || exit 1
export PATH=$PWD/../../../bin:$PATH

for i in a b c d e f;do
  # g h i j k l m n o p q r s t u v w x y z;do
  megatest -runtests % -target a/b :runname $i &
done

echo "" > num-running.log
while true; do
  foo=`megatest -list-runs % | grep RUNNING | wc -l`
  echo "Num running at `date` $foo"
  echo "$foo at `date`" >> num-running.log
  # to make the test go at a reasonable clip only gather this info ever minute
  sleep 1m
done

# Add additional steps here. Format is "stepname script"
[vars]
step1var step1.sh

[ezsteps]
step1 megatest -list-runs $MT_RUNNAME -target $MT_TARGET -itempatt %

# Test requirements are specified here
[requirements]
waiton setup bigrun bigrun3 bigrun2
priority 0

# test_meta is a section for storing additional data on your test
[test_meta]
author matt
owner  matt
description An example test
tags tagone,tagtwo
reviewed never

#!/bin/bash
if [ $NUMBER -lt 10 ];then 
   sleep 20
   sleep `echo 4 * $NUMBER | bc`
else
   sleep 130
fi

if [[ $RANDOM -lt 10000 ]];then
  exit 1
else
  exit 0
fi

# Add additional steps here. Format is "stepname script"
[vars]
step1var step1.sh

[ezsteps]
step1 #{get vars step1var}

# Test requirements are specified here
[requirements]
waiton setup
priority 0

# Iteration for your tests are controlled by the items section
[items]
NUMBER #{scheme (string-intersperse (map number->string (sort (let loop ((a 0)(res '()))(if (<= a (or (any->number (get-environment-variable "NUMTESTS")) 2500))(loop (+ a 1)(cons a res)) res)) <)) " ")}

# test_meta is a section for storing additional data on your test
[test_meta]
author matt
owner  matt
description An example test
tags tagone,tagtwo
reviewed never

#!/bin/sh
# prev_test=`$MT_MEGATEST -test-paths -target $MT_TARGET :runname $MT_RUNNAME -testpatt bigrun/$NUMBER`
# if [ -e $prev_test/testconfig ]; then
#   exit 0
# else
#   exit 1
# fi

exit 0

# Add additional steps here. Format is "stepname script"
[ezsteps]
step1 step1.sh

# Test requirements are specified here
[requirements]
waiton bigrun
priority 0
mode itemwait
itemmap .*/

# Iteration for your tests are controlled by the items section
[items]
NUMBER #{scheme (string-intersperse (map (lambda (x)(conc "blah/" x)) \
                                         (map number->string (sort (let loop ((a 0)(res '())) \
                                                                        (if (<= a (or (any->number (get-environment-variable "NUMTESTS")) 2500)) \
                                                                            (loop (+ a 1)(cons a res)) res)) <))) " ")}


# test_meta is a section for storing additional data on your test
[test_meta]
author matt
owner  matt
description An example test
tags tagone,tagtwo
reviewed never

#!/bin/sh
# prev_test=`$MT_MEGATEST -test-paths -target $MT_TARGET :runname $MT_RUNNAME -testpatt bigrun/$NUMBER`
# if [ -e $prev_test/testconfig ]; then
#   exit 0
# else
#   exit 1
# fi

exit 0

# Add additional steps here. Format is "stepname script"
[ezsteps]
step1 step1.sh

# Test requirements are specified here
[requirements]
waiton bigrun2
priority 0
mode itemwait
# pattern replacement
#
# Remove everything up to the last /
# itemmap .*/
#
# Replace foo/ with bar/
# itemmap foo/ bar/
# 
itemmap .*/

# Iteration for your tests are controlled by the items section
[items]
NUMBER #{scheme (string-intersperse (map (lambda (x)(conc "blah/" x)) \
                                         (map number->string (sort (let loop ((a 0)(res '())) \
                                                                        (if (<= a (or (any->number (get-environment-variable "NUMTESTS")) 2500)) \
                                                                            (loop (+ a 1)(cons a res)) res)) <))) " ")}

# test_meta is a section for storing additional data on your test
[test_meta]
author matt
owner  matt
description An example test
tags tagone,tagtwo
reviewed never

setenv PATH `readlink -f ../bin`:$PATH

export PATH=$(readlink -f ../bin):$PATH

[fields]
YEAR    TEXT
WEEKNUM TEXT
DAY     TEXT

[setup]
# Adjust max_concurrent_jobs to limit how much you load your machines
max_concurrent_jobs 50

# This is your link path, you can move it but it is generally better to keep it stable
linktree #{shell readlink -f #{getenv MT_RUN_AREA_HOME}/fslsynclinks}

# Job tools are more advanced ways to control how your jobs are launched
[jobtools]
useshell yes
launcher nbfind

# As you run more tests you may need to add additional disks, the names are arbitrary but must be unique
[disks]
disk0 #{shell readlink -f #{getenv MT_RUN_AREA_HOME}/fslsyncruns}

[default]
WORKAREA /tmp/#{getenv USER}/fslsync
FSLSAREA /tmp/#{getenv USER}/fsls
AREANAMES code data
SITENAMES #{shell cat $MT_RUN_AREA_HOME/sites.dat}

site1

;; You should have at least one expect:required. This ensures that your process ran
(expect:required in "LogFileBody" > 0 "done" #/done/)

;; You may need ignores to suppress false error or warning hits from the later expects
;; NOTE: Order is important here!
(expect:ignore   in "LogFileBody"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:warning  in "LogFileBody"  = 0 "Any warning" #/warn/)
(expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/error/)) ;; but disallow any other errors

#!/usr/bin/env bash

# Create needed directories both local and remote

# Remote
ssh $SITENAME mkdir -vp $WORKAREA/$SITENAME/$AREANAME

# Local
mkdir -vp $WORKAREA/$SITENAME/$AREANAME

echo done

;; You should have at least one expect:required. This ensures that your process ran
(expect:required in "LogFileBody" > 0 "done" #/done/)

;; You may need ignores to suppress false error or warning hits from the later expects
;; NOTE: Order is important here!
(expect:ignore   in "LogFileBody"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:warning  in "LogFileBody"  = 0 "Any warning" #/warn/)
(expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/error/)) ;; but disallow any other errors

#!/usr/bin/env bash

# Copy any non-existant files to the cache before doing the rsync 
# in the hopes of saving some time.

echo done

# Add additional steps here. Format is "stepname script"
[ezsteps]
mkdirs     mkdirs.sh
seedcache  seedcache.sh

# Test requirements are specified here
[requirements]
priority 0

# Iteration for your tests are controlled by the items section
[items]
AREANAME #{getenv AREANAMES}
SITENAME #{getenv SITENAMES}

# test_meta is a section for storing additional data on your test
[test_meta]
author matt
owner  matt
description Setup needed directories and seed the caches
tags tagone,tagtwo
reviewed never

;; You should have at least one expect:required. This ensures that your process ran
(expect:required in "LogFileBody" > 0 "done" #/done/)

;; You may need ignores to suppress false error or warning hits from the later expects
;; NOTE: Order is important here!
(expect:ignore   in "LogFileBody"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:warning  in "LogFileBody"  = 0 "Any warning" #/warn/)
(expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/error/)) ;; but disallow any other errors

#!/usr/bin/env bash

# Get the list of fossils from the cache

FILES=$(ls $FSLSAREA/$AREANAME|grep fossil)

# Do the remote sync from CACHE to FOSSILS
ssh $SITENAME /bin/bash <<EOF
for f in $FILES;do
    FOSSLF=$FSLSAREA/$AREANAME/\$f
    CACHEF=$WORKAREA/$SITENAME/
    if [ ! -e \$FOSSLF ];then
	cp \$CACHEF \$FOSSLF
	chmod ug+rw \$FOSSLF
    elif [ \$CACHEF -nt \$FOSSLF ];then
	fossil pull -R \$FOSSLF \$CACHEF
    fi
done
EOF 

# Do the local sync 
for f in $FILES;do
    FOSSLF=$FSLSAREA/$AREANAME/\$f
    CACHEF=$WORKAREA/$SITENAME/
    if [ ! -e \$FOSSLF ];then
	cp \$CACHEF \$FOSSLF
	chmod ug+rw \$FOSSLF
    elif [ \$CACHEF -nt \$FOSSLF ];then
	fossil pull -R \$FOSSLF \$CACHEF
    fi
done

echo done

;; You should have at least one expect:required. This ensures that your process ran
(expect:required in "LogFileBody" > 0 "done" #/done/)

;; You may need ignores to suppress false error or warning hits from the later expects
;; NOTE: Order is important here!
(expect:ignore   in "LogFileBody"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:warning  in "LogFileBody"  = 0 "Any warning" #/warn/)
(expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/error/)) ;; but disallow any other errors

#!/usr/bin/env bash

# Sync to remote cache
rsync -avz $FSLSAREA/$AREANAME/ $SITENAME:$WORKAREA/$SITENAME/$AREANAME/ &
# Sync to local cache
rsync -avz $SITENAME:$FSLSAREA/$AREANAME/ $WORKAREA/$SITENAME/$AREANAME/ &

# Wait until rsyncs complete
wait

echo done

# Add additional steps here. Format is "stepname script"
[ezsteps]
rsync rsync.sh
fsync fsync.sh

# Test requirements are specified here
[requirements]
waiton setup
priority 0

# Iteration for your tests are controlled by the items section
[items]
AREANAME #{getenv AREANAMES}
SITENAME #{getenv SITENAMES}

# test_meta is a section for storing additional data on your test
[test_meta]
author matt
owner  matt
description Sync fossils to remote
tags tagone,tagtwo
reviewed never

TESTSTORUN priority_6 sqlitespeed/ag

[default]
FOOBARBAZZZZ not a useful value
BIGBOB $FOOBARBAZZZZ/bobby
FREDDY $sysname/$fsname
TOMMY  [system pwd]

[/tmp/mrwellan/env/ubuntu/afs]
BOGOUS Bob

[default/ubuntu/nfs]
CURRENT     /blah
ALT_VAR we should not see this one

[ubuntu/nfs/none]
CURRENT     /tmp/nada
UNIQUEVAR   this one should be set

[setup]
# exectutable /path/to/megatest
max_concurrent_jobs 250

linktree #{getenv MT_RUN_AREA_HOME}/tmp/mt_links

[jobtools]
useshell yes
# ## launcher launches jobs, the job is managed on the target host
## by megatest, comment out launcher to run local
# workhosts localhost hermes
# launcher exec nbfake

launcher nbfake
# launcher echo

# launcher nbfind
# launcher nodanggood

## use "xterm -e csi -- " as a launcher to examine the launch environment.
## exit with (exit)
## get a shell with (system "bash")
# launcher xterm -e csi --

[disks]
disk0 #{getenv MT_RUN_AREA_HOME}/tmp/mt_runs

[setup]

[ezsteps]
lookittmp   ls /tmp
lookithome  ls /home

[test_meta]
author matt
owner  bob
description This test runs a single ezstep which is expected to pass, no logpro file.

tags first,single
reviewed 09/10/2011, by Matt

[fields]
sysname TEXT
fsname TEXT
datapath TEXT

# refareas can be searched to find previous runs
# the path points to where megatest.db exists
[refareas]
area1 /tmp/oldarea/megatest

[include ./configs/mt_include_1.config]

[dashboard]
pre-command  xterm -geometry 180x20 -e "
post-command |& tee results.log ;echo Press any key to continue;bash -c 'read -n 1 -s'" &
testsort -event_time

[misc]
home #{shell readlink -f $MT_RUN_AREA_HOME}
parent #{shell readlink -f $MT_RUN_AREA_HOME/..}
testsuite #{shell basename $MT_RUN_AREA_HOME}

[tests-paths]
1 #{get misc parent}/simplerun/tests

[setup]

# turn off faststart, put monitor.db in MT_RUN_AREA_HOME/db
# and set the dbdir to /var/tmp/$USER/mt_db to enable keeping
# the raw db in /var/tmp/$USER
#
faststart  no
monitordir #{getenv MT_RUN_AREA_HOME}/db
dbdir      #{getenv MT_RUN_AREA_HOME}/db

# sync more aggressively to megatest-db
megatest-db yes

# Set launchwait to no to use the more agressive code that does not wait for the launch to complete before proceeding
# this may save a few milliseconds on launching tests
# launchwait no
waivercommentpatt ^WW\d+ [a-z].*
incomplete-timeout 1

# wait for runs to completely complete. yes, anything else is no
run-wait yes

# If set to "default" the old code is used. Otherwise defaults to 200 or uses
# numeric value given.
#
runqueue 20

# Default runtimelim 1d 1h 1m 10s
#
runtimelim 20m

# Deadtime - when to consider tests dead (i.e. haven't heard from them in too long)
# Number in seconds, set to 20 seconds here to trigger a little trouble. Default is
# 1800
#
deadtime 600

# It is possible (but not recommended) to override the rsync command used
# to populate the test directories. For test development the following 
# example can be useful
#
testcopycmd cp --remove-destination -rsv TEST_SRC_PATH/. TEST_TARG_PATH/. >> TEST_TARG_PATH/mt_launch.log 2>> TEST_TARG_PATH/mt_launch.log

# or for hard links

# testcopycmd cp --remove-destination -rlv TEST_SRC_PATH/. TEST_TARG_PATH/.

# FULL or 2, NORMAL or 1, OFF or 0
synchronous 0
# Throttle roughly scales the db access milliseconds to seconds delay
throttle 0.2
# Max retries allows megatest to re-check that a tests status has changed
# as tests can have transient FAIL status occasionally
maxretries 20

# Setup continued.
[setup]

# override the logview command
#
logviewer (%MTCMD%) 2> /dev/null > /dev/null

# override the html viewer launch command
#
# htmlviewercmd firefox -new-window 
htmlviewercmd arora

# -runtests automatically deletes the records for tests with the listed states on starting up a run allowing them to re-run
#     (nb// this is in addition to NOT_STARTED which is automatically re-run)
#
allow-auto-rerun INCOMPLETE ZERO_ITEMS
# could add: STUCK STUCK/DEAD UNKNOWN KILLED KILLREQ PREQ_DISCARD

[validvalues]
state start end 0 1 - 2
status pass fail n/a 0 1 running - 2

# These are set before all tests, override them 
# in the testconfig [pre-launch-env-overrides] section
[env-override]


ALL_TOPLEVEL_TESTS          exit_0 exit_1  ez_exit2_fail  ez_fail        ez_pass              ezlog_fail \
       ezlog_fail_then_pass ezlog_pass     ezlog_warn     lineitem_fail  lineitem_pass        logpro_required_fail \
       manual_example       neverrun       priority_1     priority_10    priority_10_waiton_1 \
       priority_3           priority_4     priority_5     priority_6     priority_7           priority_8 \
       priority_9           runfirst       singletest     singletest2    sqlitespeed          test_mt_vars \
       ez_fail_quick        test1          test2

# This variable is honored by the loadrunner script. The value is in percent
MAX_ALLOWED_LOAD 200

# MT_XTERM_CMD overrides the terminal command
# MT_XTERM_CMD xterm -bg lightgreen -fg black

SPECIAL_ENV_VARS overide them here - should be seen at launch and in the runs
TESTVAR [system readlink -f .]
DEADVAR [system ls]
VARWITHDOLLAR $HOME/.zshrc
WACKYVAR  #{system ls > /dev/null}
WACKYVAR2 #{get validvalues state}
WACKYVAR3 #{getenv USER}
WACKYVAR4 #{scheme (+ 5 6 7)}
WACKYVAR5 #{getenv sysname}/#{getenv fsname}/#{getenv datapath}
WACKYVAR6 #{scheme (args:get-arg "-target")}
PREDICTABLE the_ans
MRAH MT_RUN_AREA_HOME=#{getenv MT_RUN_AREA_HOME}
# The empty var should have a definition with null string
EMPTY_VAR

WRAPPEDVAR This var should have the work blah thrice: \
blah \
blah

MYRUNNAME1 /this/is/#{getenv MT_RUNNAME}/my/runname
MYRUNNAME2 /this/is/[system echo $MT_RUNNAME]/my/runname


# XTERM   [system xterm]
# RUNDEAD [system exit 56]

[server]

# force use of server always
required yes

# Use http instead of direct filesystem access
transport http
# transport fs
# transport nmsg

synchronous 0

# If the server can't be started on this port it will try the next port until
# it succeeds
port 9080

# This server will keep running this number of hours after last access. 
# Three minutes is 0.05 hours
# timeout 0.025
timeout 0.061

# faststart; unless no, start server but proceed with writes until server started
faststart no
# faststart yes

# Start server when average query takes longer than this
# server-query-threshold 55500
server-query-threshold 1000
timeout 0.01

# daemonize yes
# hostname #{scheme (get-host-name)}

## disks are:
## name host:/path/to/area
## -or-
## name /path/to/area
[disks]
disk0 /foobarbazz
disk1 not-a-disk

[include ./configs/mt_include_2.config]

[include #{getenv USER}_testing.config]

[jobgroups]

# NOTE: job groups will falsely count the toplevel test as a job. If possible add N
#       to your jobgroups where N is the number of parallel runs you are likely to see
#      
sqlite3 6
blockz  10
#       to your jobgroups where N is the number of parallel runs you are likely to see
#       

#======================================================================
# Machine flavors
#
#   These specify lists of hosts or scripts to use or call for various
#   flavors of task.
#
#======================================================================

[flavors]

plain hosts: xena, phoebe
strong command: NBFAKE_HOST=zeus nbfake
arm hosts: cubian

[archive]

# where to get bup executable
# bup /path/to/bup

# use machines of these flavor
useflavors plain
targsize 2G

# minimum space required on an archive disk before allowing archiving to start (MB)
minspace 10

[archive-disks]

# Archives will be organised under these paths like this:
#  <testsuite>/<creationdate>
# Within the archive the data is structured like this:
#  <target>/<runname>/<test>/
disk0 /tmp/#{getenv USER}/adisk1

# Uncomment these to emulate a job queue with a long time (look in bin/sleeprunner for the time)
[jobtools]
launcher #{scheme (case (string->symbol (conc (getenv "datapath"))) \
                         ((none) "nbfake") \
                         ((openlava) "bsub -o $MT_LINKTREE/$MT_TARGET/$MT_RUNNAME.$MT_TESTNAME-$MT_ITEM_PATH.log") \
                         ((sleeprunner) "sleeprunner") \
                         (else "nbfake"))}

# launcher bsub -q priority -o $MT_TEST_RUN_DIR/openlava.log 

# launcher #{shell if which bsub > /dev/null;then echo bsub -q priority -o openlava.log;else echo sleeprunner;fi}
# launcher nbfake

[configf:settings trim-trailing-spaces yes]

# Override the rollup for specific tests
[testrollup]
runfirst ls

[test]
# VAL1 has trailing spaces
VAL1 Foo    
VAL2 ==>#{get test VAL1}Bar<== no spaces between Foo and Bar to pass

ltest #{scheme (case (string->symbol (conc (getenv "datapath"))) \
                        ((none) "nbfake") \
                        ((openlava) "bsub -o $MT_LINKTREE/$MT_TARGET/$MT_RUNNAME.$MT_TESTNAME-$MT_ITEM_PATH.log") \
                        (else "sleeprunner"))}

#================================================================
# Flexi-launcher
#================================================================
#
# [host-types]
# general ssh #{getbgesthost general}
# nbgeneral nbjob run JOBCOMMAND -log $MT_LINKTREE/$MT_TARGET/$MT_RUNNAME.$MT_TESTNAME-$MT_ITEM_PATH.lgo
# 
# [hosts]
# general cubian xena
# 
# [launchers]
# envsetup general
# xor/%/n 4C16G
# % nbgeneral
# 
# [jobtools]
# launcher bsub
# # if defined and not "no" flexi-launcher will bypass launcher unless there is no
# # match.
# flexi-launcher yes  

[jobtools]
flexi-launcher yes

[host-types]
general bsub
alt     #{get jobtools launcher}
local   nbfake
remote  #{get jobtools launcher}

[launchers]
runfirst/sum% remote
%             general

(require-library margs)
(load "../../common.scm")
(load "../../common_records.scm")
(load "../../margs.scm")
(load "../../megatest-version.scm")
(load "../../portlogger.scm")
(load "../../tasks.scm")
(load "../../db.scm")
(load "../../configf.scm")
(load "../../keys.scm")
(load "../../tree.scm")
(load "../../multi-dboard.scm")

#!/bin/bash

csi -I ../.. multi-dboard-load-all.scm

TESTSTORUN priority_4 test_mt_vars

#!/bin/bash

for x in `cat all-db-procs.txt`;do
  cat > ~/.megatestrc <<EOF
(require-library trace)
(import trace)
(trace
$x
)
EOF
  fname=`echo "$x" | tr ':!>' '-_g'`
  megatest -runtests sqlitespeed,test2,ez% -target ubuntu/nfs/none :runname $fname > $fname.log
done 

[default]
SOMEVAR This should show up in SOMEVAR3

# target based getting of config file, look at afs.config and nfs.config
[include #{getenv fsname}.config]

[include #{getenv MT_RUN_AREA_HOME}/common_runconfigs.config]

# #{system echo 'VACKYVAR #{shell pwd}' > $MT_RUN_AREA_HOME/configs/$USER.config}
[include ./configs/#{getenv USER}.config]


WACKYVAR0 #{get ubuntu/nfs/none CURRENT}
WACKYVAR1 #{scheme (args:get-arg "-target")}

[default/ubuntu/nfs]
WACKYVAR2 #{runconfigs-get CURRENT}

[ubuntu/nfs/none]
WACKYVAR2 #{runconfigs-get CURRENT}
SOMEVAR2  This should show up in SOMEVAR4 if the target is ubuntu/nfs/none
VARWITHDOLLARSIGNS The$USER/signs/should/be/replaced/with/variable

[default]
SOMEVAR3 #{rget SOMEVAR}
SOMEVAR4 #{rget SOMEVAR2}
SOMEVAR5 #{runconfigs-get SOMEVAR2}

[ubuntu/nfs/all_toplevel]
TESTPATT all_toplevel

[this/a/test]
BLAHFOO 123

[ubuntu/nfs/sleep1]
SLEEPRUNNER 1

[ubuntu/nfs/sleep10]
SLEEPRUNNER 10

[ubuntu/nfs/sleep60]
SLEEPRUNNER 60

[ubuntu/nfs/sleep240]
SLEEPRUNNER 240

;; (c) 2006,2007,2008,2009 Matthew Welland matt@kiatoa.com
;;  
;;   License GPL.

(define logbody "LogFileBody")

(define pass-specs '( ;; testname num-expected max-runtime
		     ("exit_0"		        1  20)
		     ("ezlog_fail_then_pass"    1  20)
		     ("ezlog_pass"	        1  20)
		     ("ez_pass"		        1  20)
		     ("lineitem_pass"	        1  20)
		     ("priority_1"	        1  20)
		     ("priority_10"	        1  20)
		     ("priority_10_waiton_1"    1  20)
		     ("priority_3"	        1  20)
		     ("priority_4"	        1  20)
		     ;; ("priority_5"	        1  20)
		     ("priority_6"	        1  20)
;;		     ("priority_7"	        1  20)
		     ("priority_8"	        1  20)
		     ("priority_9"	        1  20)
		     ("runfirst"	        7  20)
		     ("singletest"	        1  20)
		     ("singletest2"	        1  20)
		     ("special"		        1  20)
		     ("sqlitespeed"	       10  20)
		     ("test1"		        1  20)
		     ("test2"		        6  20)
		     ("test_mt_vars"	        6  20)
		     ))

(define fail-specs '( ;; testname num-expected max-runtime
		     ("exit_1"		        1  20)
		     ("ez_exit2_fail"           1  20)
		     ("ez_fail"		        1  20)
		     ("ez_fail_quick"	        1  20)
		     ("ezlog_fail"	        1  20)
		     ("lineitem_fail"	        1  20)
		     ("logpro_required_fail"    1  20)
		     ("manual_example"	        1  20)
		     ("neverrun"	        1  20)))
		     
(define warn-specs   '(("ezlog_warn"	        1  20)))

(define nost-specs   '(("wait_no_items1"        1  20)
		       ("wait_no_items2"        1  20)
		       ("wait_no_items3"        1  20)
		       ("wait_no_items4"        1  20)
		       ;; ("no_items"              1  20)
		       ))

(define (check-one-test estate estatus testname count runtime)
   (let* ((rxe      (regexp (conc "^\\s+Test: " testname "(\\(.*|\\s+)\\s+State: " estate "\\s+Status: " estatus "\\s+Runtime:\\s+(\\d+)s")))
	  (msg1     (conc testname " expecting count of " count))
	  (msg2     (conc testname " expecting runtime less than " runtime)))
     (expect:required in logbody = count msg1 rxe)
     ;;(expect:value    in logbody count < msg2 rxe)
     ))

;; Special cases
;;
(expect:ignore   in logbody >= 0  "db_sync test might not have run"  #/Test: db_sync/)
(expect:ignore   in logbody >= 0  "all_toplevel may not yet be done" #/Test: all_toplevel/)
(expect:error    in logbody =  0  "tests left in RUNNING state"      #/State: RUNNING/)
(expect:required in logbody =  1  "priority_2 is KILLED"             #/Test: priority_2\s+State: KILLED\s+Status: KILLED/)
(expect:required in logbody =  1  "priority_5 is either PASS or SKIP" #/Test: priority_5\s+State: COMPLETED\s+Status: (SKIP|PASS)/)
(expect:required in logbody =  1  "priority_7 is either PASS or SKIP" #/Test: priority_7\s+State: COMPLETED\s+Status: (SKIP|PASS)/)
(expect:required in logbody =  1  "testxz has 1 NOT_STARTED test"    #/Test: testxz\s+State: NOT_STARTED/)
(expect:required in logbody =  1  "no items"                         #/Test: no_items\s+State: NOT_STARTED\s+Status: ZERO_ITEMS/)
(expect:warning  in logbody =  1  "dynamic waiton"                   #/Test: dynamic_waiton/)
(expect:required in logbody = 29  "blocktestxz has 29 tests"         #/Test: blocktestxz/)

;; General cases
;;
(for-each 
 (lambda (testdat)
   (apply check-one-test "COMPLETED" "PASS" testdat))
 pass-specs)

(for-each 
 (lambda (testdat)
   (apply check-one-test "COMPLETED" "FAIL" testdat))
 fail-specs)

(for-each 
 (lambda (testdat)
   (apply check-one-test "COMPLETED" "WARN" testdat))
 warn-specs)

(for-each 
 (lambda (testdat)
   (apply check-one-test "NOT_STARTED" "PREQ_DISCARDED" testdat))
 nost-specs)

;; Catch all.
;;
(expect:error    in logbody = 0   "Tests not accounted for"     #/Test: /)


;; ;; define your hooks
;; (hook:first-error   "echo \"Error hook activated: #{escaped errmsg}\"")
;; (hook:first-warning "echo \"Got warning: #{escaped warnmsg}\"")
;; (hook:value "echo \"Value hook activated: expected=#{expected}, measured=#{measured}, tolerance=#{tolerance}, message=#{message}\"")
;; 
;; ;; first ensure your run at least started
;; ;;
;; (trigger "Init"     #/This is a header/)
;; (trigger "InitEnd"  #/^\s*$/)
;; (section "Init" "Init" "InitEnd")
;; 
;; (trigger "Body"     #/^.*$/) ;; anything starts the body
;; ;; (trigger "EndBody"  #/This had better never match/)
;; 
;; (section "Body"     "Body" "EndBody")
;; 
;; (trigger "Blah2"    #/^begin Blah2/)
;; (trigger "Blah2End" #/^end Blah2/)
;; (section "Blah2"    "Blah2" "Blah2End")
;; 
;; (expect:required in "Init"  = 1 "Header"      #/This is a header/)
;; (expect:required in "LogFileBody" > 0 "Something required but not found" #/This is required but not found/)
;; (expect:value    in "LogFileBody" 1.9 0.1 "Output voltage" #/Measured voltage output:\s*([\d\.\+\-e]+)v/)
;; (expect:value    in "LogFileBody" 0.5 0.1 "Output current" #/Measured output current:\s*([\d\.\+\-e]+)mA/)
;; (expect:value    in "LogFileBody" 110e9 2e9 "A big number (first)" #/Freq:\s*([\d\.\+\-e]+)\s+Hz/)
;; (expect:value    in "LogFileBody" 110e9 1e9 "A big number (second), hook not called" #/Freq:\s*([\d\.\+\-e]+)Hz/)
;; (expect:value    in "LogFileBody" 110e9 1e9 "A big number (never activated)" #/Freq:\s*([\d\.\+\-e]+)zH/)
;; 
;; ;; Using match number
;; (expect:value    in "LogFileBody" 1.9 0.1 "Time Voltage" #/out: (\d+)\s+(\d+)/ match: 2)
;; 
;; ;; Comparison instead of tolerance
;; (expect:value    in "LogFileBody" 1.9 >   "Time voltage" #/out: (\d+)\s+(\d+)/ match: 2)
;; 
;; (expect:ignore   in "Blah2" < 99 "FALSE ERROR" #/ERROR/)
;; (expect:ignore   in "Body"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
;; (expect:warning  in "Body"  = 0 "Any warning" #/WARNING/)
;; (expect:error    in "Body"  = 0 "ERROR BLAH"  (list #/ERROR/ #/error/)) ;; but disallow any other errors
;; 
;; ;(expect in "Init"  < 1 "Junk"        #/This is bogus/)

[ezsteps]
calcresults megatest -list-runs $MT_RUNNAME -target $MT_TARGET

[requirements]
waiton  #{getenv ALL_TOPLEVEL_TESTS}

# This is a "toplevel" test, it does not require waitons to be non-FAIL to run
mode toplevel

#!/bin/bash

$MT_MEGATEST -test-status :state $THESTATE :status $THESTATUS -setlog "nada.html"

# By exiting with non-zero we tell Megatest to preseve the state and status
exit 1

[setup]
runscript main.sh

[items]
THESTATE UNKNOWN INCOMPLETE KILLED KILLREQ STUCK BOZZLEBLONKED STUCK/DEAD
THESTATUS PASS FAIL STUCK/DEAD SKIP

[requirements]
waiton sqlitespeed

[test_meta]
author matt
owner  bob
description This test will fail causing the dependent test "testxz"\
 to never run. This triggers the code that must determine\
 that a test will never be run and thus remove it from\
 the queue of tests to be run.

tags first,single
reviewed 1/1/1965

jobgroup blockz

;; (c) 2006,2007,2008,2009 Matthew Welland matt@kiatoa.com
;;  
;;   License GPL.

;; ;; define your hooks
;; (hook:first-error   "echo \"Error hook activated: #{escaped errmsg}\"")
;; (hook:first-warning "echo \"Got warning: #{escaped warnmsg}\"")
;; (hook:value "echo \"Value hook activated: expected=#{expected}, measured=#{measured}, tolerance=#{tolerance}, message=#{message}\"")
;; 
;; ;; first ensure your run at least started
;; ;;
;; (trigger "Init"     #/This is a header/)
;; (trigger "InitEnd"  #/^\s*$/)
;; (section "Init" "Init" "InitEnd")
;; 
;; (trigger "Body"     #/^.*$/) ;; anything starts the body
;; ;; (trigger "EndBody"  #/This had better never match/)
;; 
;; (section "Body"     "Body" "EndBody")
;; 
;; (trigger "Blah2"    #/^begin Blah2/)
;; (trigger "Blah2End" #/^end Blah2/)
;; (section "Blah2"    "Blah2" "Blah2End")
;; 
;; (expect:required in "Init"  = 1 "Header"      #/This is a header/)
;; (expect:required in "LogFileBody" > 0 "Something required but not found" #/This is required but not found/)
;; (expect:value    in "LogFileBody" 1.9 0.1 "Output voltage" #/Measured voltage output:\s*([\d\.\+\-e]+)v/)
;; (expect:value    in "LogFileBody" 0.5 0.1 "Output current" #/Measured output current:\s*([\d\.\+\-e]+)mA/)
;; (expect:value    in "LogFileBody" 110e9 2e9 "A big number (first)" #/Freq:\s*([\d\.\+\-e]+)\s+Hz/)
;; (expect:value    in "LogFileBody" 110e9 1e9 "A big number (second), hook not called" #/Freq:\s*([\d\.\+\-e]+)Hz/)
;; (expect:value    in "LogFileBody" 110e9 1e9 "A big number (never activated)" #/Freq:\s*([\d\.\+\-e]+)zH/)
;; 
;; ;; Using match number
;; (expect:value    in "LogFileBody" 1.9 0.1 "Time Voltage" #/out: (\d+)\s+(\d+)/ match: 2)
;; 
;; ;; Comparison instead of tolerance
;; (expect:value    in "LogFileBody" 1.9 >   "Time voltage" #/out: (\d+)\s+(\d+)/ match: 2)
;; 
;; (expect:ignore   in "Blah2" < 99 "FALSE ERROR" #/ERROR/)
;; (expect:ignore   in "Body"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
;; (expect:warning  in "Body"  = 0 "Any warning" #/WARNING/)
;; (expect:error    in "Body"  = 0 "ERROR BLAH"  (list #/ERROR/ #/error/)) ;; but disallow any other errors
;; 
;; ;(expect in "Init"  < 1 "Junk"        #/This is bogus/)

(use sql-de-lite)

(define megatest.db (conc (get-environment-variable "MT_RUN_AREA_HOME") "/megatest.db"))

(define runsquery "sysname||'/'||fsname||'/'||datapath||'/'||runname||'/'||runs.state||'-'||runs.status") 
(define bigquery
  (conc 
   "SELECT " runsquery "||testname||'/'||item_path||'-'||'-'||tests.state||'-'||tests.status||'-'||runs.id AS outdat FROM runs INNER JOIN tests ON runs.id=tests.run_id WHERE runs.state NOT LIKE 'deleted' AND tests.state NOT LIKE 'deleted' AND testname NOT LIKE 'db_sync' ORDER BY outdat ASC ;"))

(print "Creating file for legacy db")
(with-output-to-file "legacy-db-dump"
  (lambda ()
    (let ((db (open-database megatest.db)))
      (query (for-each-row
	      (lambda (res)
		(print res)))
	     (sql db bigquery))
      (close-database db))))

(define main.db (conc (get-environment-variable "MT_DBDIR") "/main.db"))

(print "Creating file for current db")
(with-output-to-file "current-db-dump"
  (lambda ()
    (let* ((mdb      (open-database main.db))
	   (run-ids  (query fetch-column (sql mdb (conc "select id," runsquery " AS rq from runs ORDER BY rq ASC;"))))
	   (dbdir    (get-environment-variable "MT_DBDIR")))
      (for-each
       (lambda (rid)
	 (let ((dbfile (conc dbdir "/" rid ".db")))
	   (if (file-exists? dbfile)
	       (begin
		 (exec (sql mdb (conc "ATTACH DATABASE '" dbfile "' AS testsdb;")))
		 (query (for-each-row
			 (lambda (res)
			   (print res)))
			(sql mdb bigquery))
		 (exec (sql mdb "DETACH DATABASE testsdb;")))
	       (print "ERROR: No file " dbfile " found"))))
       run-ids)
      (close-database mdb))))
	 
      

(db:dbfile-path #f)

;; (c) 2006,2007,2008,2009 Matthew Welland matt@kiatoa.com
;;  
;;   License GPL.

;; ;; define your hooks
;; (hook:first-error   "echo \"Error hook activated: #{escaped errmsg}\"")
;; (hook:first-warning "echo \"Got warning: #{escaped warnmsg}\"")
;; (hook:value "echo \"Value hook activated: expected=#{expected}, measured=#{measured}, tolerance=#{tolerance}, message=#{message}\"")
;; 
;; ;; first ensure your run at least started
;; ;;
;; (trigger "Init"     #/This is a header/)
;; (trigger "InitEnd"  #/^\s*$/)
;; (section "Init" "Init" "InitEnd")
;; 
;; (trigger "Body"     #/^.*$/) ;; anything starts the body
;; ;; (trigger "EndBody"  #/This had better never match/)
;; 
;; (section "Body"     "Body" "EndBody")
;; 
;; (trigger "Blah2"    #/^begin Blah2/)
;; (trigger "Blah2End" #/^end Blah2/)
;; (section "Blah2"    "Blah2" "Blah2End")
;; 
;; (expect:required in "Init"  = 1 "Header"      #/This is a header/)
;; (expect:required in "LogFileBody" > 0 "Something required but not found" #/This is required but not found/)
;; (expect:value    in "LogFileBody" 1.9 0.1 "Output voltage" #/Measured voltage output:\s*([\d\.\+\-e]+)v/)
;; (expect:value    in "LogFileBody" 0.5 0.1 "Output current" #/Measured output current:\s*([\d\.\+\-e]+)mA/)
;; (expect:value    in "LogFileBody" 110e9 2e9 "A big number (first)" #/Freq:\s*([\d\.\+\-e]+)\s+Hz/)
;; (expect:value    in "LogFileBody" 110e9 1e9 "A big number (second), hook not called" #/Freq:\s*([\d\.\+\-e]+)Hz/)
;; (expect:value    in "LogFileBody" 110e9 1e9 "A big number (never activated)" #/Freq:\s*([\d\.\+\-e]+)zH/)
;; 
;; ;; Using match number
;; (expect:value    in "LogFileBody" 1.9 0.1 "Time Voltage" #/out: (\d+)\s+(\d+)/ match: 2)
;; 
;; ;; Comparison instead of tolerance
;; (expect:value    in "LogFileBody" 1.9 >   "Time voltage" #/out: (\d+)\s+(\d+)/ match: 2)
;; 
;; (expect:ignore   in "Blah2" < 99 "FALSE ERROR" #/ERROR/)
;; (expect:ignore   in "Body"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
;; (expect:warning  in "Body"  = 0 "Any warning" #/WARNING/)
;; (expect:error    in "Body"  = 0 "ERROR BLAH"  (list #/ERROR/ #/error/)) ;; but disallow any other errors
;; 
;; ;(expect in "Init"  < 1 "Junk"        #/This is bogus/)

(expect:error    in "LogFileBody" = 0 "Any diff is failure" #/.+/)

[pre-launch-env-vars]

MT_DBDIR #{scheme (db:dbfile-path #f)}

[ezsteps]
calcresults csi -b dbdelta.scm
showdiff    diff  current-db-dump legacy-db-dump

[requirements]
waiton  #{getenv ALL_TOPLEVEL_TESTS}

# This is a "toplevel" test, it does not require waitons to be non-FAIL to run
mode toplevel

[ezsteps]
listfiles ls

[requirements]
waiton #{scheme (string-intersperse \
                  (tests:filter-test-names \
                      (hash-table-keys (tests:get-all)) \
                      (or (args:get-arg "-runtests") \
                          (args:get-arg "-testpatt") "")) " ")}

[items]

[test_meta]
author matt
owner  bob
description This test runs a single ezstep which is expected to pass \
but there is an items definition with no items. This should evoke an \
error.

tags first,single
reviewed 09/10/2011, by Matt

#!/bin/bash

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 2
  $MT_MEGATEST -step step$i :state end :status 0
done

exit 0

[setup]
runscript main.sh

[test_meta]
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

[triggers]
NOT_STARTED/ xterm -e bash -s -- 
RUNNING/ xterm -e bash -s -- 

#!/bin/bash

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 2
  $MT_MEGATEST -step step$i :state end :status 0
done

exit 1

[setup]
runscript main.sh

[requirements]
priority 9

[test_meta]
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

[setup]

[ezsteps]
exit2       exit 2
lookithome  ls /home

[test_meta]
author matt
owner  bob
description This test runs two steps; the first exits with\
 code 2 (a fail because not using logpro) and the second\
 is a pass

tags first,single
reviewed 09/10/2011, by Matt

[setup]

[requirements]
priority 10

[ezsteps]
lookittmp   sleep 5s;ls /tmp
lookithome  sleep 2;ls /home
# should fail on next step
lookitnada  sleep 3;ls /nada
lookitusr   sleep 2;ls /usr

[test_meta]
author matt
owner  bob
description This test runs a single ezstep which is expected to pass, no logpro file.

tags first,single
reviewed 09/10/2011, by Matt

[requirements]
priority 10

[ezsteps]
# should fail on next step
lookitnada  ls /nada

[triggers]
# run like this: cmd test-id test-rundir trigger
COMPLETED/FAIL xterm;echo

[test_meta]
author matt
owner  bob
description This test runs a single ezstep which fails immediately.

tags first,single
reviewed 09/10/2011, by Matt

[setup]

[ezsteps]
lookittmp   sleep 1;ls /tmp
lookithome  sleep 1;ls /home
isrunname1  sleep 1;echo $MYRUNNAME1 | grep -v '#f' 
isrunname2  sleep 1;echo $MYRUNNAME2 | grep -v '#f' 

[test_meta]
author matt
owner  bob
description This test runs a single ezstep which is expected to pass, no logpro file.

tags first,single
reviewed 09/10/2011, by Matt

../ez_pass_linked/

;; (c) 2006,2007,2008,2009 Matthew Welland matt@kiatoa.com
;;  
;;   License GPL.

;; define your hooks
(hook:first-error   "echo \"Error hook activated: #{escaped errmsg}\"")
(hook:first-warning "echo \"Got warning: #{escaped warnmsg}\"")
(hook:value "echo \"Value hook activated: expected=#{expected}, measured=#{measured}, tolerance=#{tolerance}, message=#{message}\"")

;; first ensure your run at least started
;;
(trigger "Init"     #/This is a header/)
(trigger "InitEnd"  #/^\s*$/)
(section "Init" "Init" "InitEnd")

(trigger "Body"     #/^.*$/) ;; anything starts the body
;; (trigger "EndBody"  #/This had better never match/)

(section "Body"     "Body" "EndBody")

(trigger "Blah2"    #/^begin Blah2/)
(trigger "Blah2End" #/^end Blah2/)
(section "Blah2"    "Blah2" "Blah2End")

(expect:required in "Init"  = 1 "Header"      #/This is a header/)
(expect:required in "LogFileBody" > 0 "Something required but not found" #/This is required but not found/)
(expect:value    in "LogFileBody" 1.9 0.1 "Output voltage" #/Measured voltage output:\s*([\d\.\+\-e]+)v/)
(expect:value    in "LogFileBody" 0.5 0.1 "Output current" #/Measured output current:\s*([\d\.\+\-e]+)mA/)
(expect:value    in "LogFileBody" 110e9 2e9 "A big number (first)" #/Freq:\s*([\d\.\+\-e]+)\s+Hz/)
(expect:value    in "LogFileBody" 110e9 1e9 "A big number (second), hook not called" #/Freq:\s*([\d\.\+\-e]+)Hz/)
(expect:value    in "LogFileBody" 110e9 1e9 "A big number (never activated)" #/Freq:\s*([\d\.\+\-e]+)zH/)

;; Using match number
(expect:value    in "LogFileBody" 1.9 0.1 "Time Voltage" #/out: (\d+)\s+(\d+)/ match: 2)

;; Comparison instead of tolerance
(expect:value    in "LogFileBody" 1.9 >   "Time voltage" #/out: (\d+)\s+(\d+)/ match: 2)

(expect:ignore   in "Blah2" < 99 "FALSE ERROR" #/ERROR/)
(expect:ignore   in "Body"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:warning  in "Body"  = 0 "Any warning" #/WARNING/)
(expect:error    in "Body"  = 0 "ERROR BLAH"  (list #/ERROR/ #/error/)) ;; but disallow any other errors

;(expect in "Init"  < 1 "Junk"        #/This is bogus/)

;; (c) 2006,2007,2008,2009 Matthew Welland matt@kiatoa.com
;;  
;;   License GPL.


(expect:required in "LogFileBody" > 0 "Must be some files in the dir" #/.*/)

(expect:ignore   in "LogFileBody"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:warning  in "LogFileBody"  = 0 "Any warning" #/WARNING/)
(expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/error/)) ;; but disallow any other errors

;; (c) 2006,2007,2008,2009 Matthew Welland matt@kiatoa.com
;;  
;;   License GPL.

(expect:warning  in "LogFileBody"  = 0 "Any warning" #/WARNING/)
(expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/.*/)) ;; force an error

[setup]

[ezsteps]
lookittmp   ls /tmp
lookithome  ls /home

# logpro_file  input_glob
# matching file(s) will be diff'd with previous run and logpro applied
# if PASS or WARN result from logpro then WAIVER state is set
#
[waivers]
waiver_1 logpro lookittmp.log

[waiver_rules]

# This builtin rule is the default if there is no <waivername>.logpro file
# diff   diff %file1% %file2%

# This builtin rule is applied if a <waivername>.logpro file exists
# logpro diff %file1% %file2% | logpro %waivername%.logpro %waivername%.html

[test_meta]
author matt
owner  bob
description This test runs two ezstep, the first of which is expected to fail using a simple logpro file.

tags first,single
reviewed 09/10/2011, by Matt

(expect:warning  in "Body"  = 0 "Any warning" #/WARNING/)

;; (c) 2006,2007,2008,2009 Matthew Welland matt@kiatoa.com
;;  
;;   License GPL.


(expect:required in "LogFileBody" > 0 "Must be some files in the dir" #/.*/)

(expect:ignore   in "LogFileBody"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:warning  in "LogFileBody"  = 0 "Any warning" #/WARNING/)
(expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/error/)) ;; but disallow any other errors

#!/bin/bash

megatest -step yepstep :state start :status n/a
ls /tmp
megatest -step yepstep :state end :status $?

megatest -load-test-data << EOF
OPER,du,   1.2,  1.2, <   , GBytes  ,System didn't use too much space
EOF

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 2
  $MT_MEGATEST -step step$i :state end :status 0
done

megatest -test-status :state COMPLETED :status AUTO

[setup]

[ezsteps]
firststep main.sh

[test_meta]
author matt
owner  bob
description This test runs a single ezstep which is logpro clean\
 but fails based on -test-data loaded.

tags first,single
reviewed 09/10/2011, by Matt

;; (c) 2006,2007,2008,2009 Matthew Welland matt@kiatoa.com
;;  
;;   License GPL.

;; define your hooks
(hook:first-error   "echo \"Error hook activated: #{escaped errmsg}\"")
(hook:first-warning "echo \"Got warning: #{escaped warnmsg}\"")
(hook:value "echo \"Value hook activated: expected=#{expected}, measured=#{measured}, tolerance=#{tolerance}, message=#{message}\"")

;; first ensure your run at least started
;;
(trigger "Init"     #/This is a header/)
(trigger "InitEnd"  #/^\s*$/)
(section "Init" "Init" "InitEnd")

(trigger "Body"     #/^.*$/) ;; anything starts the body
;; (trigger "EndBody"  #/This had better never match/)

(section "Body"     "Body" "EndBody")

(trigger "Blah2"    #/^begin Blah2/)
(trigger "Blah2End" #/^end Blah2/)
(section "Blah2"    "Blah2" "Blah2End")

(expect:required in "Init"  = 1 "Header"      #/This is a header/)
(expect:required in "LogFileBody" > 0 "Something required but not found" #/This is required but not found/)
(expect:value    in "LogFileBody" 1.9 0.1 "Output voltage" #/Measured voltage output:\s*([\d\.\+\-e]+)v/)
(expect:value    in "LogFileBody" 0.5 0.1 "Output current" #/Measured output current:\s*([\d\.\+\-e]+)mA/)
(expect:value    in "LogFileBody" 110e9 2e9 "A big number (first)" #/Freq:\s*([\d\.\+\-e]+)\s+Hz/)
(expect:value    in "LogFileBody" 110e9 1e9 "A big number (second), hook not called" #/Freq:\s*([\d\.\+\-e]+)Hz/)
(expect:value    in "LogFileBody" 110e9 1e9 "A big number (never activated)" #/Freq:\s*([\d\.\+\-e]+)zH/)

;; Using match number
(expect:value    in "LogFileBody" 1.9 0.1 "Time Voltage" #/out: (\d+)\s+(\d+)/ match: 2)

;; Comparison instead of tolerance
(expect:value    in "LogFileBody" 1.9 >   "Time voltage" #/out: (\d+)\s+(\d+)/ match: 2)

(expect:ignore   in "Blah2" < 99 "FALSE ERROR" #/ERROR/)
(expect:ignore   in "Body"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:warning  in "Body"  = 0 "Any warning" #/WARNING/)
(expect:error    in "Body"  = 0 "ERROR BLAH"  (list #/ERROR/ #/error/)) ;; but disallow any other errors

;(expect in "Init"  < 1 "Junk"        #/This is bogus/)

;; (c) 2006,2007,2008,2009 Matthew Welland matt@kiatoa.com
;;  
;;   License GPL.


(expect:required in "LogFileBody" > 0 "Must be some files in the dir" #/.*/)

(expect:ignore   in "LogFileBody"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:warning  in "LogFileBody"  = 0 "Any warning" #/WARNING/)
(expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/error/)) ;; but disallow any other errors

[setup]

[ezsteps]
lookittmp   ls /tmp
lookithome  ls /home

[test_meta]
author matt
owner  bob
description This test runs a single ezstep which is expected to pass using a simple logpro file.

tags first,single
reviewed 09/10/2011, by Matt

;; (c) 2006,2007,2008,2009 Matthew Welland matt@kiatoa.com
;;  
;;   License GPL.


;; Force a warn for this test
(expect:required in "LogFileBody" > 0 "Must be some files in the dir" #/.*/)

(expect:ignore   in "LogFileBody"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:warning  in "LogFileBody"  = 0 "Any warning" #/warn/)
(expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/error/)) ;; but disallow any other errors

;; (c) 2006,2007,2008,2009 Matthew Welland matt@kiatoa.com
;;  
;;   License GPL.


(expect:warning  in "LogFileBody"  = 0 "Any warning" #/.*/)
;; Can't have a required since it will mask the warns! Could make the warn non-overlapping with the
;; required I suppose...
;; (expect:required in "LogFileBody" > 0 "Must be some files in the dir" #/.*/)

(expect:ignore   in "LogFileBody"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/error/)) ;; but disallow any other errors

[setup]

[ezsteps]
lookittmp   ls /tmp
lookithome  ls $HOME

[test_meta]
author matt
owner  bob
description This test runs two ezsteps the first of which is expected to fail using a simple logpro file.

tags first,single
reviewed 09/10/2011, by Matt

#!/bin/bash

$MT_MEGATEST -load-test-data << EOF
foo,bar,   1.2,  1.9, >
foo,rab, 1.0e9, 10e9, 1e9
foo,bla,   1.2,  1.9, <
foo,bal,   1.2,  1.2, <   ,     ,Check for overload
foo,alb,   1.2,  1.2, <=  , Amps,This is the high power circuit test
foo,abl,   1.2,  1.3, 0.1
foo,bra,   1.2, pass, silly stuff
faz,bar,    10,  8mA,     ,     ,"this is a comment"
EOF

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 2
  $MT_MEGATEST -step step$i :state end :status 0
done

# Needed to force rolling up the results and set the test to COMPLETED
$MT_MEGATEST -test-status :state COMPLETED :status AUTO

[setup]
runscript main.sh

[test_meta]
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

#!/bin/bash

# category variable value expected  tol/comp units comment
$MT_MEGATEST -load-test-data << EOF
foo,       bar,     1.9,  1.8,      >
foo,       rab,   1.0e9,  2e9,      1e9
foo,       bla,     1.2,  1.9,      <
foo,       bal,    -1.1,    0,      <   ,         , Check for overload
foo,       alb,     1.2,  1.2,      <=  ,     Amps, This is the high power circuit test
foo,       abl,     1.2,  1.3,      0.1
foo,       bra,     1.2, pass,      silly stuff
faz,       bar,      10,  8mA,          ,         ,"this is a comment"
EOF

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 2
  $MT_MEGATEST -step step$i :state end :status 0
done
# Needed to force rolling up the results and set the test to COMPLETED
$MT_MEGATEST -test-status :state COMPLETED :status AUTO

[setup]
runscript main.sh

[test_meta]
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

[setup]

[ezsteps]
lookittmp   ls /tmp

[test_meta]
author matt
owner  bob
description This test runs two ezstep, the first of which is expected to fail using a simple logpro file.

[logpro]
lookittmp ;; (c) 2006,2007,2008,2009 Matthew Welland matt@kiatoa.com
  ;;  
  ;;   License GPL.
  ;;
  (expect:required in "LogFileBody" > 0 "A file name that should never exist!" #/This is a awfully stupid file name that should never be found in the temp dir/)
  ;;
  ;; (expect:warning  in "LogFileBody"  = 0 "Any warning" #/WARNING/)
  ;; (expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/.*/)) ;; force an error


tags logpro
reviewed 09/10/2011, by Matt

category, variable, expected,   value,  tol,   units,  comment

#!/bin/bash

if [[ $TARGETDISPLAY = "" || $TARGETHOST = "" || $TARGETDIR = "" || $TARGETUSER = "" ]]; then
    msg="You must set the TARGETDISPLAY, TARGETHOST, TARGETDIR and TARGETUSER variables for manual tests"
    echo $msg
    megatest -test-status :state COMPLETED :status FAIL -m $msg
    exit 1
else
    megatest -step setup :state start :status n/a
    xterm -display $TARGETDISPLAY -e ./setupremote.sh
    megatest -step setup :state end :status $?
fi

#!/bin/bash

megatest -step rsyncto :state start :status n/a
echo "First, lets populate your area with necessary files, you may be prompted for your Unix password several times"
rsync -avz $MT_TEST_RUN_DIR/  $TARGETUSER@$TARGETHOST:$TARGETDIR
megatest -step rsyncto :state end :status n/a

megatest -step runtest :state start :status n/a
remotecmd="cd $TARGETDIR;xterm -display $TARGETDISPLAY"
echo Launching $remotecmd on $TARGETHOST as $TARGETUSER
ssh $TARGETUSER@$TARGETHOST $remotecmd
megatest -step runtest :state end :status $?

megatest -step gatherdata :state start :status n/a
rsync -avz $TARGETUSER@$TARGETHOST:$TARGETDIR/results/ $MT_TEST_RUN_DIR/results/
if [[ -e $MT_TEST_RUN_DIR/results/results.csv ]]; then
    megatest -load-test-data < $MT_TEST_RUN_DIR/results/results.csv
fi

if [[ -e $MT_TEST_RUN_DIR/results/final_results.log && $MT_TEST_RUN_DIR/final_results.logpro ]]; then
    logpro $MT_TEST_RUN_DIR/final_results.logpro $MT_TEST_RUN_DIR/final_results.html < $MT_TEST_RUN_DIR/results/final_results.log
    if [[ $? = 0 ]]; then
	finalstatus=PASS
    else
	finalstatus=FAIL
    fi
    megatest -test-status :state COMPLETED :status $finalstatus -setlog final_results.html
fi

[setup]

[ezsteps]
setup ./runsetupxterm.sh
# launch launchxterm

[test_meta]
author matt
owner  bob
description This test runs a single ezstep which is expected to pass\
 using a simple logpro file.
tags first,single
reviewed 09/10/2011, by Matt

[setup]
runscript idontexist

[ezsteps]
listfiles ls

[items]
FOO

[test_meta]
author matt
owner  bob
description This test runs a single ezstep which is expected to pass \
but there is an items definition with no items. This should evoke an \
error.

tags first,single
reviewed 09/10/2011, by Matt

#!/bin/bash

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 2
  $MT_MEGATEST -step step$i :state end :status 0
done

exit 0

[setup]
runscript main.sh

[requirements]
priority 1

[test_meta]
jobgroup sqlite3
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

[triggers]
COMPLETED/ echo $MT_TEST_NAME > $MT_RUN_AREA_HOME/foo

#!/bin/bash

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 2
  $MT_MEGATEST -step step$i :state end :status 0
done

exit 0

[setup]
runscript main.sh

[requirements]
priority 10

[test_meta]
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

#!/bin/bash

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 2
  $MT_MEGATEST -step step$i :state end :status 0
done

exit 0

[setup]
runscript main.sh

[requirements]
priority 10
waiton priority_1

[test_meta]
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

#!/bin/bash

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 5
  $MT_MEGATEST -step step$i :state end :status 0
done

exit 0

[setup]
runscript main.sh

[requirements]
priority 2
# runtimelim 1d 1h 1m 10s
runtimelim 20s

[test_meta]
jobgroup sqlite3
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

This test used to look for envfile.txt but that file should NOT have been there.

By changing to lookithome.log it is possible that an error is masked.

#!/bin/bash

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 2
  echo "<html><header>Results$i</header><body>Nothing but faux results here!</body></html>" > results$i.html
  $MT_MEGATEST -step step$i :state end :status 0
done

# get a previous test
export EZFAILPATH=`$MT_MEGATEST -test-files lookithome.log -target $MT_TARGET :runname $MT_RUNNAME -testpatt ez_fail`
if [[ -e $EZFAILPATH ]];then
  echo All good!
else
  echo NOT good!
  exit 1
fi

exit 0

[setup]
runscript main.sh

[requirements]
priority 3


[test_meta]
jobgroup sqlite3
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

#!/bin/bash

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 2
  $MT_MEGATEST -step step$i :state end :status 0
done

exit 0

[setup]
runscript main.sh

[requirements]
priority 4

[test_meta]
jobgroup sqlite3
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

#!/bin/bash

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 2
  $MT_MEGATEST -step step$i :state end :status 0
done

exit 0

[setup]
runscript main.sh

[requirements]
priority 5

[skip]
prevrunning #t

[test_meta]
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

#!/bin/bash

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 2
  $MT_MEGATEST -step step$i :state end :status 0
done

exit 0

[setup]
runscript main.sh

[requirements]
priority 6

[test_meta]
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

#!/bin/bash

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 2
  $MT_MEGATEST -step step$i :state end :status 0
done

exit 0

[setup]
runscript main.sh

[requirements]
priority 7

[skip]
# Run only if this much time since last run of this test
rundelay 10m 5s

[test_meta]
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

#!/bin/bash

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  echo "start step before $i: `date`"
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  echo "start step after $i: `date`"
  sleep 2
  echo "end step before $i: `date`"
  $MT_MEGATEST -step step$i :state end :status 0
  echo "end step after $i: `date`"
done

exit 0

[setup]
runscript main.sh

[requirements]
priority 8

[test_meta]
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

#!/bin/bash

# a bunch of steps in 2 second increments
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17;do
  $MT_MEGATEST -step step$i :state start :status running -setlog results$i.html
  sleep 2
  $MT_MEGATEST -step step$i :state end :status 0
done

exit 0

[setup]
runscript main.sh

[requirements]
priority 9

[test_meta]
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

#!/bin/bash

# (export DISPLAY=:0;xterm) 

# megatest -step wasting_time :state start :status n/a -m "This is a test step comment"
# sleep 20
# megatest -step wasting_time :state end :status $?

touch ../I_was_here
mkdir -p $MT_RUN_AREA_HOME/tmp/$USER/$sysname/$fsname/$datapath/$MT_RUNNAME
echo 1 2 3 4 5 > $MT_RUN_AREA_HOME/tmp/$USER/$sysname/$fsname/$datapath/$MT_RUNNAME/the_ans

$MT_MEGATEST -runstep wasting_time -logpro wasting_time.logpro "sleep 8;echo all done eh?" -m "This is a test step comment"

$MT_MEGATEST -load-test-data << EOF
foo,bar,1.2,1.9,>
foo,rab,1.0e9,10e9,1e9
foo,bla,1.2,1.9,<
foo,bal,1.2,1.2,<,,Check for overload
foo,alb,1.2,1.2,<=,Amps,This is the high power circuit test
foo,abl,1.2,1.3,0.1
foo,bra,1.2,pass,silly stuff
faz,bar,10,8mA,,,"this is a comment"
EOF

$MT_MEGATEST -load-test-data << EOF
cat,  var, val, exp, comp, units, comment, status, type
ameas,iout,1.2,1.9,>,Amps,Comment,,meas
EOF
loadstatus=$?

if [[ `basename $PWD` == "mustfail" ]];then
  $MT_MEGATEST -test-status :state COMPLETED :status FAIL
else
  $MT_MEGATEST -test-status :state COMPLETED :status $loadstatus -m "This is a test level comment" :value 10e6 :expected_value 1.1e6 :tol 100e3 :category nada :variable sillyvar :units mFarks :comment "This is the value/expected comment"
fi

env > envfile.txt

# $MT_MEGATEST -test-status :state COMPLETED :status FAIL

[setup]
runscript main.sh

[pre-launch-env-vars]
# These are set before the test is launched on the originating
# host. This can be used to control remote launch tools, e.g. to
# to choose the target host, select the launch tool etc.
SPECIAL_ENV_VAR override with everything after the first space.

[items]
SEASON summer winter fall spring 

[itemstable]
BLOCK a  b
TOCK  1  2

[test_meta]
author matt
owner  bob
description This test must\
 be run before the other tests

tags first,single
reviewed 1/1/1965

;; put stuff here

;; NOTE: This is not legit logpro code!!! 

;; Test for 0=PASS, 1=WARN, >2 = FAIL

;; (define season (get-environment-variable "SEASON"))
;; 
;; (exit 
;;  (case (string->symbol season)
;;    ((summer) 0)
;;    ((winter) 1)
;;    ((fall)   2)
;;    (else     0)))

#!/bin/bash

# megatest -step wasting_time :state start :status n/a -m "This is a test step comment"
# sleep 20
# megatest -step wasting_time :state end :status $?

$MT_MEGATEST -runstep wasting_time -logpro wasting_time.logpro "sleep 5;echo alldone" -m "This is a test step comment"

$MT_MEGATEST -test-status :state COMPLETED :status $? -m "This is a test level comment" -set-toplog the_top_log.html :first_err "This is the first error"

[setup]
runscript main.sh

[requirements]
diskspace 1M
memory    1G

[pre-launch-env-vars]
# These are set before the test is launched on the originating
# host. This can be used to control remote launch tools, e.g. to
# to choose the target host, select the launch tool etc.
SPECIAL_ENV_VAR override with everything after the first space.

;; put stuff here

;; NOTE: This is not legit logpro code!!! 

;; Test for 0=PASS, 1=WARN, >2 = FAIL

;; (define season (get-environment-variable "SEASON"))
;; 
;; (exit 
;;  (case (string->symbol season)
;;    ((summer) 0)
;;    ((winter) 1)
;;    ((fall)   2)
;;    (else     0)))

#!/bin/bash

# megatest -step wasting_time :state start :status n/a -m "This is a test step comment"
# sleep 20
# megatest -step wasting_time :state end :status $?

$MT_MEGATEST -runstep wasting_time -logpro wasting_time.logpro "sleep 5;echo all done eh?" -m "This is a test step comment"

$MT_MEGATEST -test-status :state COMPLETED :status $? -m "This is a test level comment" -set-toplog the_top_log.html :first_warn "This is the first warning"

[setup]
runscript main.sh

[requirements]
diskspace 1M
memory    1G
waiton singletest

[pre-launch-env-vars]
# These are set before the test is launched on the originating
# host. This can be used to control remote launch tools, e.g. to
# to choose the target host, select the launch tool etc.
SPECIAL_ENV_VAR override with everything after the first space.

;; put stuff here

;; NOTE: This is not legit logpro code!!! 

;; Test for 0=PASS, 1=WARN, >2 = FAIL

;; (define season (get-environment-variable "SEASON"))
;; 
;; (exit 
;;  (case (string->symbol season)
;;    ((summer) 0)
;;    ((winter) 1)
;;    ((fall)   2)
;;    (else     0)))

[ezsteps]
# calcresults megatest -list-runs $MT_RUNNAME -target $MT_TARGET

[requirements]
waiton #{rget TESTSTORUN}

# This is a "toplevel" test, it does not require waitons to be non-FAIL to run
mode toplevel

#! /usr/bin/env ruby

require "#{ENV['MT_RUN_AREA_HOME']}/../resources/ruby/librunscript.rb"

# run_record(stepname, cmd) - will record in db if exit code of script was zero or not
run_and_record('create db',"sqlite3 testing.db << EOF\ncreate table if not exists blah(id INTEGER PRIMARY KEY,name TEXT);\n.q\nEOF","")

if (! File.exists?("../../runfirst/I_was_here"))
    puts "ERROR: This test was started before the prerequisites ran!"
    system "megatest -test-status :state INCOMPLETE :status FAIL"
    exit 1
end

# file_size_checker(stepname, filename, minsize, maxsize) - negative means ignore
# file_size_checker('create db','testing.db',100,-1)

num_records=rand(5) # 0000
record_step("add #{num_records}","start","n/a")
status=false
(0..num_records).each do |i|
  randstring="abc";
  # "a;lskdfja;sdfj;alsdfj;aslfdj;alsfja;lsfdj;alsfja;lsjfd;lasfjl;asdfja;slfj;alsjf;asljf;alsjf;lasdjf;lasjf;lasjf;alsjf;lashflkashflkerhflkdsvnlasldhlfaldf"
  # status=system "sqlite3 testing.db \"insert into blah (name) values ('#{randstring}');\""
  system "megatest -step testing :state wrote_junk :status #{num_records}"
  sleep(5)
  puts "i=#{i}"
end
if status==0
  status='pass'
else
  status='fail'
end

record_step("add #{num_records}","end",status)

[setup]
runscript runscript.rb
tags non important,dumb junk

[requirements]
waiton    runfirst

[items]
MANYITEMS [system (env > envfile.txt;echo aa ab ac ad ae af ag ah ai)]
# BORKED  

[test_meta]
jobgroup sqlite3

(expect:error in "LogFileBody" = 0 "a file that should never exist" #/what a dumb filename this is/)

#!/usr/bin/env bash

! grep ALT_VAR megatest.sh

(expect:error in "LogFileBody" = 0 "a file that should never exist" #/what a dumb filename this is/)

#!/usr/bin/env bash

! grep BOGOUS megatest.sh

(expect:error in "LogFileBody" = 0 "a file that should never exist" #/what a dumb filename this is/)

#!/usr/bin/env bash

grep -e '^export CURRENT' megatest.sh | grep /tmp/nada

(expect:error in "LogFileBody" = 0 "a file that should never exist" #/what a dumb filename this is/)

#!/usr/bin/env bash

if [ x$EMPTY_VAR != "x" ];then
  echo BAD EMPTY VAR!
  exit 1
fi

#!/bin/bash

if env | grep VARWITHDOLLARSIGNS | grep USER;then
    exit 1 # fails!
else
    exit 0 # good!
fi

(expect:error in "LogFileBody" = 0 "a file that should never exist" #/what a dumb filename this is/)

(expect:error in "LogFileBody" = 0 "a file that should never exist" #/what a dumb filename this is/)

#!/bin/bash


# get a previous test
export EZFAILPATH=`$MT_MEGATEST -test-files envfile.txt -target $MT_TARGET :runname $MT_RUNNAME -testpatt runfirst/a%`

echo "Found |$EZFAILPATH|"

if [ -e $EZFAILPATH ];then
  echo All good!
else
  echo NOT good!
  exit 1
fi

export EZFAILPATH2=`$MT_MEGATEST -test-paths -target $MT_TARGET :runname $MT_RUNNAME -testpatt runfirst/a%`

echo "Found |$EZFAILPATH2|"

if [ -e $EZFAILPATH2 ];then
  echo All good!
else
  echo NOT good!
  exit 1
fi


exit 0

(expect:error in "LogFileBody" = 0 "a file that should never exist" #/what a dumb filename this is/)

[setup]

[ezsteps]
lookittmp   ls /tmp
lookithome  ls /home
# $CURRENT should be /tmp/nada
currentisblah currentisblah.sh

# $BOGOUS should NOT be set
bogousnotset bogousnotset.sh

# ALT_VAR should NOT be set
altvarnotset altvarnotset.sh

# EMPTY_VAR should be an empty string
empty_var empty_var.sh

# VACKYVAR should be set to a path
vackyvar vackyvar.sh

# test-path and test-file
test-path test-path-file.sh

# verify that vars with $ signs get expanded
varwithdollar eval_vars.sh

[requirements]
waiton runfirst
priority 0

[items]
NUMNUM [system cat $MT_RUN_AREA_HOME/tmp/$USER/$sysname/$fsname/$datapath/$MT_RUNNAME/$PREDICTABLE]

[test_meta]
author matt
owner  bob
description This test runs a single ezstep which is expected to pass, no logpro file.

tags first,single
reviewed 09/10/2011, by Matt

(expect:error in "LogFileBody" = 0 "a file that should never exist" #/what a dumb filename this is/)

#!/usr/bin/env bash

grep VACKYVAR megatest.sh | grep fullrun

(expect:error in "LogFileBody" = 0 "a file that should never exist" #/what a dumb filename this is/)

# Add additional steps here. Format is "stepname script"
[ezsteps]
listfiles ls

# Test requirements are specified here
[requirements]
waiton blocktestxz

# test_meta is a section for storing additional data on your test
[test_meta]
author mrwellan
owner  mrwellan
description This test should never get run due to blocktestxz failing
tags tagone,tagtwo
reviewed never

[ezsteps]
listfiles ls

[requirements]
waiton no_items

[items]

[test_meta]
author matt
owner  bob
description This test runs a single ezstep which is expected to pass \
but there is an items definition with no items. This should evoke an \
error.

tags first,single
reviewed 09/10/2011, by Matt

[ezsteps]
listfiles ls

[requirements]
waiton wait_no_items1

[items]

[test_meta]
author matt
owner  bob
description This test runs a single ezstep which is expected to pass \
but there is an items definition with no items. This should evoke an \
error.

tags first,single
reviewed 09/10/2011, by Matt

[ezsteps]
listfiles ls

[requirements]
waiton wait_no_items2

[items]

[test_meta]
author matt
owner  bob
description This test runs a single ezstep which is expected to pass \
but there is an items definition with no items. This should evoke an \
error.

tags first,single
reviewed 09/10/2011, by Matt

[ezsteps]
listfiles ls

[requirements]
waiton wait_no_items3

[items]

[test_meta]
author matt
owner  bob
description This test runs a single ezstep which is expected to pass \
but there is an items definition with no items. This should evoke an \
error.

tags first,single
reviewed 09/10/2011, by Matt

../megatest.config

../runconfigs.config

megatest.config
runconfigs.config

((@ (http://www.w3.org/2001/XMLSchema-instance:schemaLocation
      "http://www.gnumeric.org/v9.xsd"))
 (http://www.gnumeric.org/v10.dtd:Version
   (@ (Minor "17") (Major "10") (Full "1.10.17") (Epoch "1")))
 (http://www.gnumeric.org/v10.dtd:Attributes
   (http://www.gnumeric.org/v10.dtd:Attribute
     (http://www.gnumeric.org/v10.dtd:type "4")
     (http://www.gnumeric.org/v10.dtd:name
       "WorkbookView::show_horizontal_scrollbar")
     (http://www.gnumeric.org/v10.dtd:value "TRUE"))
   (http://www.gnumeric.org/v10.dtd:Attribute
     (http://www.gnumeric.org/v10.dtd:type "4")
     (http://www.gnumeric.org/v10.dtd:name
       "WorkbookView::show_vertical_scrollbar")
     (http://www.gnumeric.org/v10.dtd:value "TRUE"))
   (http://www.gnumeric.org/v10.dtd:Attribute
     (http://www.gnumeric.org/v10.dtd:type "4")
     (http://www.gnumeric.org/v10.dtd:name "WorkbookView::show_notebook_tabs")
     (http://www.gnumeric.org/v10.dtd:value "TRUE"))
   (http://www.gnumeric.org/v10.dtd:Attribute
     (http://www.gnumeric.org/v10.dtd:type "4")
     (http://www.gnumeric.org/v10.dtd:name "WorkbookView::do_auto_completion")
     (http://www.gnumeric.org/v10.dtd:value "TRUE"))
   (http://www.gnumeric.org/v10.dtd:Attribute
     (http://www.gnumeric.org/v10.dtd:type "4")
     (http://www.gnumeric.org/v10.dtd:name "WorkbookView::is_protected")
     (http://www.gnumeric.org/v10.dtd:value "FALSE")))
 (urn:oasis:names:tc:opendocument:xmlns:office:1.0:document-meta
   (@ (urn:oasis:names:tc:opendocument:xmlns:office:1.0:version "1.2"))
   (urn:oasis:names:tc:opendocument:xmlns:office:1.0:meta
     (http://purl.org/dc/elements/1.1/:date "2013-07-21T23:45:07Z")
     (urn:oasis:names:tc:opendocument:xmlns:meta:1.0:creation-date
       "2013-07-21T23:42:35Z")))
 (http://www.gnumeric.org/v10.dtd:Calculation
   (@ (MaxIterations "100")
      (ManualRecalc "0")
      (IterationTolerance "0.001")
      (FloatRadix "2")
      (FloatDigits "53")
      (EnableIteration "1")))
 (http://www.gnumeric.org/v10.dtd:SheetNameIndex
   (http://www.gnumeric.org/v10.dtd:SheetName
     (@ (http://www.gnumeric.org/v10.dtd:Rows "65536")
        (http://www.gnumeric.org/v10.dtd:Cols "256"))
     "megatest.config")
   (http://www.gnumeric.org/v10.dtd:SheetName
     (@ (http://www.gnumeric.org/v10.dtd:Rows "65536")
        (http://www.gnumeric.org/v10.dtd:Cols "256"))
     "runconfigs.config"))
 (http://www.gnumeric.org/v10.dtd:Geometry (@ (Width "1440") (Height "647")))
 (http://www.gnumeric.org/v10.dtd:UIData (@ (SelectedTab "0"))))

(*TOP* (*PI* xml "version=\"1.0\" encoding=\"UTF-8\""))

(http://www.gnumeric.org/v10.dtd:Sheet
  (@ (Visibility "GNM_SHEET_VISIBILITY_VISIBLE")
     (OutlineSymbolsRight "1")
     (OutlineSymbolsBelow "1")
     (HideZero "0")
     (HideRowHeader "0")
     (HideGrid "0")
     (HideColHeader "0")
     (GridColor "0:0:0")
     (DisplayOutlines "1")
     (DisplayFormulas "0"))
  (http://www.gnumeric.org/v10.dtd:MaxCol "5")
  (http://www.gnumeric.org/v10.dtd:MaxRow "7")
  (http://www.gnumeric.org/v10.dtd:Zoom "1")
  (http://www.gnumeric.org/v10.dtd:Names
    (http://www.gnumeric.org/v10.dtd:Name
      (http://www.gnumeric.org/v10.dtd:name "Print_Area")
      (http://www.gnumeric.org/v10.dtd:value "#REF!")
      (http://www.gnumeric.org/v10.dtd:position "A1"))
    (http://www.gnumeric.org/v10.dtd:Name
      (http://www.gnumeric.org/v10.dtd:name "Sheet_Title")
      (http://www.gnumeric.org/v10.dtd:value "\"megatest.config\"")
      (http://www.gnumeric.org/v10.dtd:position "A1")))
  (http://www.gnumeric.org/v10.dtd:PrintInformation
    (http://www.gnumeric.org/v10.dtd:Margins
      (http://www.gnumeric.org/v10.dtd:top (@ (PrefUnit "mm") (Points "120")))
      (http://www.gnumeric.org/v10.dtd:bottom
        (@ (PrefUnit "mm") (Points "120")))
      (http://www.gnumeric.org/v10.dtd:left (@ (PrefUnit "mm") (Points "72")))
      (http://www.gnumeric.org/v10.dtd:right (@ (PrefUnit "mm") (Points "72")))
      (http://www.gnumeric.org/v10.dtd:header
        (@ (PrefUnit "mm") (Points "72")))
      (http://www.gnumeric.org/v10.dtd:footer
        (@ (PrefUnit "mm") (Points "72"))))
    (http://www.gnumeric.org/v10.dtd:Scale
      (@ (type "percentage") (percentage "100")))
    (http://www.gnumeric.org/v10.dtd:vcenter (@ (value "0")))
    (http://www.gnumeric.org/v10.dtd:hcenter (@ (value "0")))
    (http://www.gnumeric.org/v10.dtd:grid (@ (value "0")))
    (http://www.gnumeric.org/v10.dtd:even_if_only_styles (@ (value "0")))
    (http://www.gnumeric.org/v10.dtd:monochrome (@ (value "0")))
    (http://www.gnumeric.org/v10.dtd:draft (@ (value "0")))
    (http://www.gnumeric.org/v10.dtd:titles (@ (value "0")))
    (http://www.gnumeric.org/v10.dtd:do_not_print (@ (value "0")))
    (http://www.gnumeric.org/v10.dtd:print_range (@ (value "0")))
    (http://www.gnumeric.org/v10.dtd:order "d_then_r")
    (http://www.gnumeric.org/v10.dtd:orientation "portrait")
    (http://www.gnumeric.org/v10.dtd:Header
      (@ (Right "") (Middle "&[TAB]") (Left "")))
    (http://www.gnumeric.org/v10.dtd:Footer
      (@ (Right "") (Middle "Page &[PAGE]") (Left "")))
    (http://www.gnumeric.org/v10.dtd:paper "na_letter")
    (http://www.gnumeric.org/v10.dtd:comments "in_place")
    (http://www.gnumeric.org/v10.dtd:errors "as_displayed"))
  (http://www.gnumeric.org/v10.dtd:Styles
    (http://www.gnumeric.org/v10.dtd:StyleRegion
      (@ (startRow "0") (startCol "0") (endRow "65535") (endCol "255"))
      (http://www.gnumeric.org/v10.dtd:Style
        (@ (WrapText "0")
           (VAlign "2")
           (ShrinkToFit "0")
           (Shade "0")
           (Rotation "0")
           (PatternColor "0:0:0")
           (Locked "1")
           (Indent "0")
           (Hidden "0")
           (HAlign "1")
           (Format "General")
           (Fore "0:0:0")
           (Back "FFFF:FFFF:FFFF"))
        (http://www.gnumeric.org/v10.dtd:Font
          (@ (Unit "10")
             (Underline "0")
             (StrikeThrough "0")
             (Script "0")
             (Italic "0")
             (Bold "0"))
          "Sans"))))
  (http://www.gnumeric.org/v10.dtd:Cols
    (@ (DefaultSizePts "48"))
    (http://www.gnumeric.org/v10.dtd:ColInfo
      (@ (Unit "112.5") (No "0") (HardSize "1")))
    (http://www.gnumeric.org/v10.dtd:ColInfo (@ (Unit "48") (No "1")))
    (http://www.gnumeric.org/v10.dtd:ColInfo
      (@ (Unit "63.75") (No "2") (HardSize "1")))
    (http://www.gnumeric.org/v10.dtd:ColInfo (@ (Unit "48") (No "3")))
    (http://www.gnumeric.org/v10.dtd:ColInfo
      (@ (Unit "86.25") (No "4") (HardSize "1")))
    (http://www.gnumeric.org/v10.dtd:ColInfo (@ (Unit "48") (No "5"))))
  (http://www.gnumeric.org/v10.dtd:Rows
    (@ (DefaultSizePts "12.75"))
    (http://www.gnumeric.org/v10.dtd:RowInfo
      (@ (Unit "12.75") (No "0") (Count "8"))))
  (http://www.gnumeric.org/v10.dtd:Selections
    (@ (CursorRow "0") (CursorCol "0"))
    (http://www.gnumeric.org/v10.dtd:Selection
      (@ (startRow "0") (startCol "0") (endRow "0") (endCol "0"))))
  (http://www.gnumeric.org/v10.dtd:SheetLayout (@ (TopLeft "A1")))
  (http://www.gnumeric.org/v10.dtd:Solver
    (@ (ProgramR "0")
       (ProblemType "0")
       (NonNeg "1")
       (ModelType "0")
       (MaxTime "60")
       (MaxIter "1000")
       (Discr "0")
       (AutoScale "0"))))

(http://www.gnumeric.org/v10.dtd:Sheet
  (@ (Visibility "GNM_SHEET_VISIBILITY_VISIBLE")
     (OutlineSymbolsRight "1")
     (OutlineSymbolsBelow "1")
     (HideZero "0")
     (HideRowHeader "0")
     (HideGrid "0")
     (HideColHeader "0")
     (GridColor "0:0:0")
     (DisplayOutlines "1")
     (DisplayFormulas "0"))
  (http://www.gnumeric.org/v10.dtd:MaxCol "3")
  (http://www.gnumeric.org/v10.dtd:MaxRow "7")
  (http://www.gnumeric.org/v10.dtd:Zoom "1")
  (http://www.gnumeric.org/v10.dtd:Names
    (http://www.gnumeric.org/v10.dtd:Name
      (http://www.gnumeric.org/v10.dtd:name "Print_Area")
      (http://www.gnumeric.org/v10.dtd:value "#REF!")
      (http://www.gnumeric.org/v10.dtd:position "A1"))
    (http://www.gnumeric.org/v10.dtd:Name
      (http://www.gnumeric.org/v10.dtd:name "Sheet_Title")
      (http://www.gnumeric.org/v10.dtd:value "\"runconfigs.config\"")
      (http://www.gnumeric.org/v10.dtd:position "A1")))
  (http://www.gnumeric.org/v10.dtd:PrintInformation
    (http://www.gnumeric.org/v10.dtd:Margins
      (http://www.gnumeric.org/v10.dtd:top (@ (PrefUnit "mm") (Points "120")))
      (http://www.gnumeric.org/v10.dtd:bottom
        (@ (PrefUnit "mm") (Points "120")))
      (http://www.gnumeric.org/v10.dtd:left (@ (PrefUnit "mm") (Points "72")))
      (http://www.gnumeric.org/v10.dtd:right (@ (PrefUnit "mm") (Points "72")))
      (http://www.gnumeric.org/v10.dtd:header
        (@ (PrefUnit "mm") (Points "72")))
      (http://www.gnumeric.org/v10.dtd:footer
        (@ (PrefUnit "mm") (Points "72"))))
    (http://www.gnumeric.org/v10.dtd:Scale
      (@ (type "percentage") (percentage "100")))
    (http://www.gnumeric.org/v10.dtd:vcenter (@ (value "0")))
    (http://www.gnumeric.org/v10.dtd:hcenter (@ (value "0")))
    (http://www.gnumeric.org/v10.dtd:grid (@ (value "0")))
    (http://www.gnumeric.org/v10.dtd:even_if_only_styles (@ (value "0")))
    (http://www.gnumeric.org/v10.dtd:monochrome (@ (value "0")))
    (http://www.gnumeric.org/v10.dtd:draft (@ (value "0")))
    (http://www.gnumeric.org/v10.dtd:titles (@ (value "0")))
    (http://www.gnumeric.org/v10.dtd:do_not_print (@ (value "0")))
    (http://www.gnumeric.org/v10.dtd:print_range (@ (value "0")))
    (http://www.gnumeric.org/v10.dtd:order "d_then_r")
    (http://www.gnumeric.org/v10.dtd:orientation "portrait")
    (http://www.gnumeric.org/v10.dtd:Header
      (@ (Right "") (Middle "&[TAB]") (Left "")))
    (http://www.gnumeric.org/v10.dtd:Footer
      (@ (Right "") (Middle "Page &[PAGE]") (Left "")))
    (http://www.gnumeric.org/v10.dtd:paper "na_letter")
    (http://www.gnumeric.org/v10.dtd:comments "in_place")
    (http://www.gnumeric.org/v10.dtd:errors "as_displayed"))
  (http://www.gnumeric.org/v10.dtd:Styles
    (http://www.gnumeric.org/v10.dtd:StyleRegion
      (@ (startRow "0") (startCol "0") (endRow "65535") (endCol "255"))
      (http://www.gnumeric.org/v10.dtd:Style
        (@ (WrapText "0")
           (VAlign "2")
           (ShrinkToFit "0")
           (Shade "0")
           (Rotation "0")
           (PatternColor "0:0:0")
           (Locked "1")
           (Indent "0")
           (Hidden "0")
           (HAlign "1")
           (Format "General")
           (Fore "0:0:0")
           (Back "FFFF:FFFF:FFFF"))
        (http://www.gnumeric.org/v10.dtd:Font
          (@ (Unit "10")
             (Underline "0")
             (StrikeThrough "0")
             (Script "0")
             (Italic "0")
             (Bold "0"))
          "Sans"))))
  (http://www.gnumeric.org/v10.dtd:Cols
    (@ (DefaultSizePts "48"))
    (http://www.gnumeric.org/v10.dtd:ColInfo
      (@ (Unit "108.8") (No "0") (HardSize "1")))
    (http://www.gnumeric.org/v10.dtd:ColInfo
      (@ (Unit "97.5") (No "1") (HardSize "1")))
    (http://www.gnumeric.org/v10.dtd:ColInfo
      (@ (Unit "100.5") (No "2") (HardSize "1") (Count "2"))))
  (http://www.gnumeric.org/v10.dtd:Rows
    (@ (DefaultSizePts "12.75"))
    (http://www.gnumeric.org/v10.dtd:RowInfo
      (@ (Unit "13.5") (No "0") (Count "2")))
    (http://www.gnumeric.org/v10.dtd:RowInfo (@ (Unit "12.75") (No "2")))
    (http://www.gnumeric.org/v10.dtd:RowInfo
      (@ (Unit "13.5") (No "3") (Count "2")))
    (http://www.gnumeric.org/v10.dtd:RowInfo (@ (Unit "12.75") (No "5")))
    (http://www.gnumeric.org/v10.dtd:RowInfo (@ (Unit "13.5") (No "6")))
    (http://www.gnumeric.org/v10.dtd:RowInfo (@ (Unit "12.75") (No "7"))))
  (http://www.gnumeric.org/v10.dtd:Selections
    (@ (CursorRow "7") (CursorCol "3"))
    (http://www.gnumeric.org/v10.dtd:Selection
      (@ (startRow "7") (startCol "3") (endRow "7") (endCol "3"))))
  (http://www.gnumeric.org/v10.dtd:SheetLayout (@ (TopLeft "A1")))
  (http://www.gnumeric.org/v10.dtd:Solver
    (@ (ProgramR "0")
       (ProblemType "0")
       (NonNeg "1")
       (ModelType "0")
       (MaxTime "60")
       (MaxIter "1000")
       (Discr "0")
       (AutoScale "0"))))

CHICKEN_URL http://code.call-cc.org/releases/4.8.0/chicken-4.8.0.4.tar.gz

CHICKEN_URL http://code.call-cc.org/dev-snapshots/2013/01/04/chicken-4.8.1.tar.gz

[fields]
CHICKEN_VERSION TEXT
MEGATEST_VERSION TEXT
IUPMODE TEXT
BUILD_TAG TEXT

[setup]
max_concurrent_jobs 6
linktree #{getenv MT_RUN_AREA_HOME}/links
testcopycmd cp --remove-destination -rsv TEST_SRC_PATH/. TEST_TARG_PATH/. >> TEST_TARG_PATH/mt_launch.log 2>> TEST_TARG_PATH/mt_launch.log

[jobtools]
useshell yes
launcher nbfind

[env-override]
EXAMPLE_VAR example value

[server]
port 9080

[disks]
disk0 #{getenv MT_RUN_AREA_HOME}/runs

[.............]
#
# [CHICKEN_VERSION/MEGATEST_VERSION/IUPMODE/PLATFORM/BUILD_TAG]
#

[default]
ALLTESTS see this variable
PREFIX #{getenv MT_RUN_AREA_HOME}/#{getenv BUILD_TAG}/#{getenv MT_RUNNAME}
DOWNLOADS #{getenv MT_RUN_AREA_HOME}/downloads
IUPLIB 26g4
PLATFORM linux
LOGPRO_VERSION v1.05
BUILDSQLITE yes
SQLITE3_VERSION 3071401
ZEROMQ_VERSION  2.2.0
logpro_VERSION v1.08
stml_VERSION v0.901
megatest_VERSION v1.5511

[include configs/hicken-#{getenv CHICKEN_VERSION}.config]

# Currently must have at least one variable in a section
[4.8.0/trunk/bin/std]
IUP_VERSION na

[4.8.0.4/trunk/src/std]
CHICKEN_URL http://code.call-cc.org/releases/4.8.0/chicken-4.8.0.4.tar.gz
IUP_VERSION na

[4.8.1/trunk/src/std]
IUP_VERSION na

[4.8.0/v1.5508/opt]
IUP_VERSION na
PREFIX /opt/chicken/4.8.0

[4.8.0/trunk/centos5.7vm]
BUILDSQLITE no

;; You should have at least one expect:required. This ensures that your process ran
(expect:required in "LogFileBody" > 0 "Put description here" #/put pattern here/)

;; You may need ignores to suppress false error or warning hits from the later expects
;; NOTE: Order is important here!
(expect:ignore   in "LogFileBody"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:warning  in "LogFileBody"  = 0 "Any warning" #/warn/)
(expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/error/i)) ;; but disallow any other errors

#!/usr/bin/env bash

# Run your step here

source $PREFIX/buildsetup.sh

# Add additional steps here. Format is "stepname script"
[ezsteps]
install install.sh

# Test requirements are specified here
[requirements]
waiton iuplib setup

# Iteration for your tests are controlled by the items section
[items]

# test_meta is a section for storing additional data on your test
[test_meta]
author matt
owner  matt
description Install the canvas-draw egg
tags tagone,tagtwo
reviewed never

;; You should have at least one expect:required. This ensures that your process ran
(expect:required in "LogFileBody" > 0 "Leaving directory ..." #/Leaving directory/)

;; You may need ignores to suppress false error or warning hits from the later expects
;; NOTE: Order is important here!
(expect:ignore   in "LogFileBody"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:ignore   in "LogFileBody"  >= 0 "Ignore HAVE_STRERROR" #/HAVE_STRERROR/)

(expect:warning  in "LogFileBody"  = 0 "Any warning" #/warn/)
(expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/error/i)) ;; but disallow any other errors

#!/usr/bin/env bash

# Run your step here

source $PREFIX/buildsetup.sh

cd chicken-${CHICKEN_VERSION}
make PLATFORM=${PLATFORM} PREFIX=${PREFIX}

;; You should have at least one expect:required. This ensures that your process ran
(expect:required in "LogFileBody" > 0 "README file must be seen" #/README$/)

;; You may need ignores to suppress false error or warning hits from the later expects
;; NOTE: Order is important here!

(expect:ignore   in "LogFileBody"  >= 0 "Ignore error flagged by finalizer-error-test" #/\w+-error/)

(expect:ignore   in "LogFileBody"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:warning  in "LogFileBody"  = 0 "Any warning" #/warn/)
(expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/error/i)) ;; but disallow any other errors

#!/usr/bin/env bash

# Run your step here

source $PREFIX/buildsetup.sh

if [ ! -e ${DOWNLOADS}/chicken-${CHICKEN_VERSION}.tar.gz ]; then 
  if [ "${CHICKEN_URL}" == "" ]; then
     CHICKEN_URL=http://code.call-cc.org/releases/${CHICKEN_VERSION}/chicken-${CHICKEN_VERSION}.tar.gz
  fi
  echo "Downloading $CHICKEN_URL"
  (cd ${DOWNLOADS};wget ${CHICKEN_URL})
fi 

ls -l ${DOWNLOADS}/chicken-${CHICKEN_VERSION}.tar.gz

tar xfvz ${DOWNLOADS}/chicken-${CHICKEN_VERSION}.tar.gz

ls -l chicken-${CHICKEN_VERSION}

;; You should have at least one expect:required. This ensures that your process ran
(expect:required in "LogFileBody" > 0 "Leaving directory" #/Leaving directory/)

;; You may need ignores to suppress false error or warning hits from the later expects
;; NOTE: Order is important here!

(expect:ignore   in "LogFileBody" >= 0 "Ignore error in some filenames" #/\w+-errors/)

(expect:ignore   in "LogFileBody"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:warning  in "LogFileBody"  = 0 "Any warning" #/warn/)
(expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/error/i)) ;; but disallow any other errors

#!/usr/bin/env bash

# Run your step here

source $PREFIX/buildsetup.sh
# source $PREFIX

cd chicken-${CHICKEN_VERSION}
make PLATFORM=${PLATFORM} PREFIX=${PREFIX} install

ls -l ${PREFIX}/bin

# Add additional steps here. Format is "stepname script"
[ezsteps]
download download.sh
compile compile.sh
install install.sh

# Test requirements are specified here
[requirements]
waiton setup
# priority 10

# Iteration for your tests are controlled by the items section
[items]
# CHICKEN_VERSION 4.8.0

# test_meta is a section for storing additional data on your test
[test_meta]
author matt
owner  matt
description Download and install chicken scheme
tags tagone,tagtwo
reviewed never

;; You should have at least one expect:required. This ensures that your process ran
(expect:required in "LogFileBody" > 0 "Last thing done is chmod ..." #/chmod /)

;; You may need ignores to suppress false error or warning hits from the later expects
;; NOTE: Order is important here!
(expect:ignore   in "LogFileBody" >= 0 "Ignore someword-errors"        #/\w+-error/)
(expect:ignore   in "LogFileBody"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:warning  in "LogFileBody"  = 0 "Any warning" #/warn/)
(expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/error/i)) ;; but disallow any other errors

#!/usr/bin/env bash

# Run your step here

source $PREFIX/buildsetup.sh

$PREFIX/bin/chicken-install $PROX $EGG_NAME

# Add additional steps here. Format is "stepname script"
[ezsteps]
install install.sh

# Test requirements are specified here
[requirements]
waiton chicken setup
priority 9

# Iteration for your tests are controlled by the items section
[items]
EGG_NAME matchable readline apropos base64 regex-literals format regex-case test coops trace csv dot-locking posix-utils posix-extras directory-utils hostinfo tcp-server rpc csv-xml fmt json md5 ssax sxml-serializer sxml-modifications salmonella sql-de-lite postgresql

# test_meta is a section for storing additional data on your test
[test_meta]
author matt
owner  matt
description Download and install eggs with no significant prerequisites
tags tagone,tagtwo
reviewed never

;; You should have at least one expect:required. This ensures that your process ran
(expect:required in "LogFileBody" > 0 "Leaving directory" #/Leaving directory/)

;; You may need ignores to suppress false error or warning hits from the later expects
;; NOTE: Order is important here!
(expect:ignore   in "LogFileBody"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:warning  in "LogFileBody"  = 0 "Any warning" #/warn/)
(expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/error/i)) ;; but disallow any other errors

#!/usr/bin/env bash

# Run your step here

source $PREFIX/buildsetup.sh

cd ffcall
./configure --prefix=${PREFIX} --enable-shared
make

;; You should have at least one expect:required. This ensures that your process ran
(expect:required in "LogFileBody" > 0 "VERSION" #/ VERSION/)

;; You may need ignores to suppress false error or warning hits from the later expects
;; NOTE: Order is important here!
(expect:ignore   in "LogFileBody"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:warning  in "LogFileBody"  = 0 "Any warning" #/warn/)
(expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/error/i)) ;; but disallow any other errors

#!/usr/bin/env bash

# Run your step here

source $PREFIX/buildsetup.sh

if ! [[ -e ${DOWNLOADS}/ffcall.tar.gz ]] ; then
    (cd ${DOWNLOADS};wget http://www.kiatoa.com/matt/iup/ffcall.tar.gz )
fi

tar xfvz ${DOWNLOADS}/ffcall.tar.gz

ls -l ffcall

;; You should have at least one expect:required. This ensures that your process ran
(expect:required in "LogFileBody" > 0 "Leaving directory" #/Leaving directory/)

;; You may need ignores to suppress false error or warning hits from the later expects
;; NOTE: Order is important here!
(expect:ignore   in "LogFileBody"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:warning  in "LogFileBody"  = 0 "Any warning" #/warn/)
(expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/error/i)) ;; but disallow any other errors

#!/usr/bin/env bash

# Run your step here

source $PREFIX/buildsetup.sh

cd ffcall
make install

# Add additional steps here. Format is "stepname script"
[ezsteps]
download download.sh
compile compile.sh
install install.sh

# Test requirements are specified here
[requirements]
waiton setup

# Iteration for your tests are controlled by the items section
[items]

# test_meta is a section for storing additional data on your test
[test_meta]
author matt
owner  matt
description Install the ffcall library
tags tagone,tagtwo
reviewed never

;; You should have at least one expect:required. This ensures that your process ran
(expect:required in "LogFileBody" > 0 "chmod is roughly last thing that happens" #/chmod /)

;; You may need ignores to suppress false error or warning hits from the later expects
;; NOTE: Order is important here!
(expect:ignore   in "LogFileBody"  >= 0 "Ignore setup-error-handling" #/\w+-error/)
(expect:ignore   in "LogFileBody"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:warning  in "LogFileBody"  = 0 "Any warning" #/warn/)
(expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/error/i)) ;; but disallow any other errors

#!/usr/bin/env bash

# Run your step here
source $PREFIX/buildsetup.sh
# source $PREFIX/setup-chicken4x.sh

export CSCLIBS=`echo $LD_LIBRARY_PATH | sed 's/:/ -L/g'`
CSC_OPTIONS="-I$PREFIX/include -L$CSCLIBS" $PREFIX/bin/chicken-install $PROX -D no-library-checks -feature disable-iup-web iup
# CSC_OPTIONS="-I$PREFIX/include -L$CSCLIBS" $CHICKEN_INSTALL $PROX -D no-library-checks -feature disable-iup-web -deploy -prefix $DEPLOYTARG iup
# iup:1.0.2 
CSC_OPTIONS="-I$PREFIX/include -L$CSCLIBS" $PREFIX/bin/chicken-install $PROX -D no-library-checks canvas-draw
# CSC_OPTIONS="-I$PREFIX/include -L$CSCLIBS" $CHICKEN_INSTALL $PROX -D no-library-checks -deploy -prefix $DEPLOYTARG canvas-draw

# Add additional steps here. Format is "stepname script"
[ezsteps]
install install.sh

# Test requirements are specified here
[requirements]
waiton iup#{getenv IUPMODE}lib tougheggs

# Iteration for your tests are controlled by the items section
[items]

# test_meta is a section for storing additional data on your test
[test_meta]
author matt
owner  matt
description Install iup egg
tags tagone,tagtwo
reviewed never

;; You should have at least one expect:required. This ensures that your process ran
(expect:required in "LogFileBody" > 0 "Put description here" #/put pattern here/)

;; You may need ignores to suppress false error or warning hits from the later expects
;; NOTE: Order is important here!
(expect:ignore   in "LogFileBody"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:warning  in "LogFileBody"  = 0 "Any warning" #/warn/)
(expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/error/i)) ;; but disallow any other errors

#!/usr/bin/env bash

# Run your step here

source $PREFIX/buildsetup.sh

;; You should have at least one expect:required. This ensures that your process ran
(expect:required in "LogFileBody" > 0 "README file should show up" #/README/)

;; You may need ignores to suppress false error or warning hits from the later expects
;; NOTE: Order is important here!
(expect:ignore   in "LogFileBody"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:warning  in "LogFileBody"  = 0 "Any warning" #/warn/)
(expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/error/i)) ;; but disallow any other errors

#!/usr/bin/env bash

# Run your step here
source $PREFIX/buildsetup.sh
# source $PREFIX/setup-chicken4x.sh

if [[ `uname -a | grep x86_64` == "" ]]; then 
    export ARCHSIZE=''
else
    export ARCHSIZE=64_
fi
    # export files="cd-5.4.1_Linux${IUPLIB}_lib.tar.gz im-3.6.3_Linux${IUPLIB}_lib.tar.gz iup-3.5_Linux${IUPLIB}_lib.tar.gz"
if [[ x$USEOLDIUP == "x" ]];then
   export files="cd-5.5.1_Linux${IUPLIB}_${ARCHSIZE}lib.tar.gz im-3.8_Linux${IUPLIB}_${ARCHSIZE}lib.tar.gz iup-3.6_Linux${IUPLIB}_${ARCHSIZE}lib.tar.gz"
else
   echo WARNING: Using old IUP libraries
   export files="cd-5.4.1_Linux${IUPLIB}_${ARCHSIZE}lib.tar.gz im-3.6.3_Linux${IUPLIB}_${ARCHSIZE}lib.tar.gz iup-3.5_Linux${IUPLIB}_${ARCHSIZE}lib.tar.gz"
fi

mkdir -p $PREFIX/iuplib
for a in `echo $files` ; do
    if ! [[ -e ${DOWNLOADS}/$a ]] ; then
	(cd ${DOWNLOADS};wget http://www.kiatoa.com/matt/iup/$a)
    fi
    echo Untarring $a into $PREFIX/lib
    (cd $PREFIX/lib;tar xfvz ${DOWNLOADS}/$a;mv include/* ../include)
done

;; You should have at least one expect:required. This ensures that your process ran
(expect:required in "LogFileBody" > 0 "Put description here" #/put pattern here/)

;; You may need ignores to suppress false error or warning hits from the later expects
;; NOTE: Order is important here!
(expect:ignore   in "LogFileBody"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:warning  in "LogFileBody"  = 0 "Any warning" #/warn/)
(expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/error/i)) ;; but disallow any other errors

#!/usr/bin/env bash

# Run your step here
source $PREFIX/buildsetup.sh

# Add additional steps here. Format is "stepname script"
[ezsteps]
download download.sh

# Test requirements are specified here
[requirements]
waiton ffcall setup

# Iteration for your tests are controlled by the items section
[items]

# test_meta is a section for storing additional data on your test
[test_meta]
author matt
owner  matt
description Install the iup library if it is not already installed
tags tagone,tagtwo
reviewed never

;; You should have at least one expect:required. This ensures that your process ran
(expect:required in "LogFileBody" > 0 "Put description here" #/put pattern here/)

;; You may need ignores to suppress false error or warning hits from the later expects
;; NOTE: Order is important here!
(expect:ignore   in "LogFileBody"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:warning  in "LogFileBody"  = 0 "Any warning" #/warn/)
(expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/error/i)) ;; but disallow any other errors

#!/usr/bin/env bash

# Run your step here
source $PREFIX/buildsetup.sh

(expect:ignore in "LogFileBody" >= 0 "Ignore these binary operator errors for now" #/error: missing binary operator/)

(load "compile.logpro")

;; You should have at least one expect:required. This ensures that your process ran
(expect:required in "LogFileBody" > 0 "Completed signature" #/(Dynamic Library.*Done|Leaving directory|Nothing to be done)/)

;; You may need ignores to suppress false error or warning hits from the later expects
;; NOTE: Order is important here!
(expect:ignore   in "LogFileBody" >= 0 "Ignore files with error in name" #/error.[ch]/)
(expect:ignore   in "LogFileBody" >= 0 "Ignore files with errors in name" #/errors.[ch]/)
(expect:ignore   in "LogFileBody" >= 0 "Ignore files with warn in name"  #/warning.[ch]/)

(expect:ignore   in "LogFileBody"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:warning  in "LogFileBody"  = 0 "Any warning" #/warn/)
(expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/error/i)) ;; but disallow any other errors

#!/usr/bin/env bash

# Run your step here

pkg=$1

source $PREFIX/buildsetup.sh

export LUA_SUFFIX=
export LUA_INC=$MT_TEST_RUN_DIR/lua52/include

if [[ $pkg == "lua52" ]]; then
    (cd $pkg/src;make $PLATFORM)
else
    (cd $pkg/src;make)
fi

;; You should have at least one expect:required. This ensures that your process ran
(expect:required in "LogFileBody" > 0 "README file should show up" #/README/)

;; You may need ignores to suppress false error or warning hits from the later expects
;; NOTE: Order is important here!

(expect:ignore   in "LogFileBody" >= 0 "Ignore files with error in name" #/error.[ch]/)
(expect:ignore   in "LogFileBody" >= 0 "Ignore files with errors in name" #/errors.[ch]/)
(expect:ignore   in "LogFileBody" >= 0 "Ignore files with warn in name"  #/warning.[ch]/)

(expect:ignore   in "LogFileBody"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:warning  in "LogFileBody"  = 0 "Any warning" #/warn/)
(expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/error/i)) ;; but disallow any other errors

#!/usr/bin/env bash

# Run your step here
source $PREFIX/buildsetup.sh

mkdir -p $PREFIX/iuplib
for a in cd-5.6.1_Sources.tar.gz  im-3.8.1_Sources.tar.gz  iup-3.8_Sources.tar.gz lua-5.2.1_Sources.tar.gz; do
    if ! [[ -e ${DOWNLOADS}/$a ]] ; then
	(cd ${DOWNLOADS};wget http://www.kiatoa.com/matt/iup/$a)
    fi
    tar xfvz ${DOWNLOADS}/$a
done

find . -type d -exec chmod ug+x {} \;

(load "compile.logpro")

;; You should have at least one expect:required. This ensures that your process ran
(expect:required in "LogFileBody" > 0 "Put description here" #/put pattern here/)

;; You may need ignores to suppress false error or warning hits from the later expects
;; NOTE: Order is important here!
(expect:ignore   in "LogFileBody"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:warning  in "LogFileBody"  = 0 "Any warning" #/warn/)
(expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/error/i)) ;; but disallow any other errors

#!/usr/bin/env bash

# Run your step here
source $PREFIX/buildsetup.sh

# The so files
cp -f im/lib/Linux26g4/*.so $PREFIX/lib
cp -f cd/lib/Linux26g4/*.so $PREFIX/lib
cp -f iup/lib/Linux26g4/*.so $PREFIX/lib

# The development files
mkdir -p $PREFIX/include/im
cp -fR im/include/*.h $PREFIX/include/im
cp -f im/lib/Linux26g4/*.a $PREFIX/lib

mkdir -p $PREFIX/include/cd
cp -f cd/include/*.h $PREFIX/include/cd
cp -f cd/lib/Linux26g4/*.a $PREFIX/lib

mkdir -p /usr/include/iup
cp -f iup/include/*.h $PREFIX/include/iup             
cp -f iup/lib/Linux26g4/*.a $PREFIX/lib     

(expect:ignore in "LogFileBody" >= 0 "Ignore these binary operator errors for now" #/error: missing binary operator/ expires: "10/10/2013")

(load "compile.logpro")

(load "compile.logpro")

# Add additional steps here. Format is "stepname script"
[ezsteps]
download download.sh
lua compile.sh lua52
im compile.sh im
cd compile.sh cd
iup compile.sh iup

# Test requirements are specified here
[requirements]
waiton ffcall setup

# Iteration for your tests are controlled by the items section
[items]

# test_meta is a section for storing additional data on your test
[test_meta]
author matt
owner  matt
description Install the iup library if it is not already installed
tags tagone,tagtwo
reviewed never