;; Copyright 2006-2012, Matthew Welland.
;;
;; This program is made available under the GNU GPL version 2.0 or
;; greater. See the accompanying file COPYING for details.
;;
;; This program is distributed WITHOUT ANY WARRANTY; without even the
;; implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
;; PURPOSE.
(require-extension (srfi 18) extras tcp s11n)
(use sqlite3 srfi-1 posix regex regex-case srfi-69 hostinfo md5 message-digest)
(import (prefix sqlite3 sqlite3:))
(use zmq)
(declare (unit server))
(declare (uses common))
(declare (uses db))
(declare (uses tests))
(declare (uses tasks)) ;; tasks are where stuff is maintained about what is running.
(include "common_records.scm")
(include "db_records.scm")
;; Transition to pub --> sub with pull <-- push
;;
;; 1. client sends request to server via push to the pull port
;; 2. server puts request in queue or processes immediately as appropriate
;; 3. server puts responses from completed requests into pub port
;;
;; TODO
;;
;; Done Tested
;; [x] [ ] 1. Add columns pullport pubport to servers table
;; [x] [ ] 2. Add rm of monitor.db if older than 11/12/2012
;; [x] [ ] 3. Add create of pullport and pubport with finding of available ports
;; [x] [ ] 4. Add client compose of request
;; [x] [ ] - name of client: testname/itempath-test_id-hostname
;; [x] [ ] - name of request: callname, params
;; [x] [ ] - request key: f(clientname, callname, params)
;; [x] [ ] 5. Add processing of subscription hits
;; [x] [ ] - done when get key
;; [x] [ ] - return results
;; [x] [ ] 6. Add timeout processing
;; [x] [ ] - after 60 seconds
;; [ ] [ ] i. check server alive, connect to new if necessary
;; [ ] [ ] ii. resend request
;; [ ] [ ] 7. Turn self ping back on
(define (server:make-server-url hostport)
(if (not hostport)
#f
(conc "tcp://" (car hostport) ":" (cadr hostport))))
(define *server-loop-heart-beat* (current-seconds))
(define *heartbeat-mutex* (make-mutex))
;;======================================================================
;; S E R V E R
;;======================================================================
(define-inline (zmqsock:get-pub dat)(vector-ref dat 0))
(define-inline (zmqsock:get-pull dat)(vector-ref dat 1))
(define-inline (zmqsock:set-pub! dat s)(vector-set! dat s 0))
(define-inline (zmqsock:set-pull! dat s)(vector-set! dat s 0))
(define (server:run hostn)
(debug:print 2 "Attempting to start the server ...")
(if (not *toppath*)
(if (not (setup-for-run))
(begin
(debug:print 0 "ERROR: cannot find megatest.config, cannot start server, exiting")
(exit))))
(let* ((zmq-sdat1 #f)
(zmq-sdat2 #f)
(pull-socket #f)
(pub-socket #f)
(p1 #f)
(p2 #f)
(zmq-sockets-dat #f)
(iface (if (string=? "-" hostn)
"*" ;; (get-host-name)
hostn))
(hostname (get-host-name))
(ipaddrstr (let ((ipstr (if (string=? "-" hostn)
(string-intersperse (map number->string (u8vector->list (hostname->ip hostname))) ".")
#f)))
(if ipstr ipstr hostname)))
(last-run 0))
(set! zmq-sockets-dat (server:setup-ports ipaddrstr (if (args:get-arg "-port")
(string->number (args:get-arg "-port"))
(+ 5000 (random 1001)))))
(set! zmq-sdat1 (car zmq-sockets-dat))
(set! pull-socket (cadr zmq-sdat1)) ;; (iface s port)
(set! p1 (caddr zmq-sdat1))
(set! zmq-sdat2 (cadr zmq-sockets-dat))
(set! pub-socket (cadr zmq-sdat2))
(set! p2 (caddr zmq-sdat2))
(set! *cache-on* #t)
;; what to do when we quit
;;
;; (on-exit (lambda ()
;; (if (and *toppath* *server-info*)
;; (open-run-close tasks:server-deregister-self tasks:open-db (car *server-info*))
;; (let loop ()
;; (let ((queue-len 0))
;; (thread-sleep! (random 5))
;; (mutex-lock! *incoming-mutex*)
;; (set! queue-len (length *incoming-data*))
;; (mutex-unlock! *incoming-mutex*)
;; (if (> queue-len 0)
;; (begin
;; (debug:print-info 0 "Queue not flushed, waiting ...")
;; (loop))))))))
;; The heavy lifting
;;
;; make-vector-record cdb packet client-sig qtype immediate query-sig params qtime
;;
(let loop ((queue-lst '()))
(let* ((rawmsg (receive-message* pull-socket))
(packet (db:string->obj rawmsg))
(qtype (cdb:packet-get-qtype packet)))
(debug:print-info 12 "server=> received packet=" packet)
(if (not (member qtype '(sync ping)))
(begin
(mutex-lock! *heartbeat-mutex*)
(set! *last-db-access* (current-seconds))
(mutex-unlock! *heartbeat-mutex*)))
(if #t ;; (cdb:packet-get-immediate packet) ;; process immediately or put in queue
(begin
(open-run-close db:process-queue #f pub-socket (cons packet queue-lst))
(loop '()))
(loop (cons packet queue-lst)))))))
;; run server:keep-running in a parallel thread to monitor that the db is being
;; used and to shutdown after sometime if it is not.
;;
(define (server:keep-running)
;; if none running or if > 20 seconds since
;; server last used then start shutdown
;; This thread waits for the server to come alive
(let* ((server-info (let loop ()
(let ((sdat #f))
(mutex-lock! *heartbeat-mutex*)
(set! sdat *server-info*)
(mutex-unlock! *heartbeat-mutex*)
(if sdat sdat
(begin
(sleep 4)
(loop))))))
(iface (cadr server-info))
(pullport (caddr server-info))
(pubport (cadddr server-info)) ;; id interface pullport pubport)
(zmq-sockets (server:client-connect iface pullport pubport))
(last-access 0))
(let loop ((count 0))
(thread-sleep! 4) ;; no need to do this very often
;; NB// sync currently does NOT return queue-length
(let ((queue-len (cdb:client-call zmq-sockets 'sync #t 1)))
;; (print "Server running, count is " count)
(if (< count 1) ;; 3x3 = 9 secs aprox
(loop (+ count 1)))
;; NOTE: Get rid of this mechanism! It really is not needed...
(open-run-close tasks:server-update-heartbeat tasks:open-db (car server-info))
;; (if ;; (or (> numrunning 0) ;; stay alive for two days after last access
(mutex-lock! *heartbeat-mutex*)
(set! last-access *last-db-access*)
(mutex-unlock! *heartbeat-mutex*)
(if (> (+ last-access
;; (* 50 60 60) ;; 48 hrs
;; 60 ;; one minute
;; (* 60 60) ;; one hour
(* 45 60) ;; 45 minutes, until the db deletion bug is fixed.
)
(current-seconds))
(begin
(debug:print-info 2 "Server continuing, seconds since last db access: " (- (current-seconds) last-access))
(loop 0))
(begin
(debug:print-info 0 "Starting to shutdown the server.")
;; need to delete only *my* server entry (future use)
(set! *time-to-exit* #t)
(open-run-close tasks:server-deregister-self tasks:open-db (get-host-name))
(thread-sleep! 1)
(debug:print-info 0 "Max cached queries was " *max-cache-size*)
(debug:print-info 0 "Server shutdown complete. Exiting")
(exit)))))))
(define (server:find-free-port-and-open iface s port stype #!key (trynum 50))
(let ((s (if s s (make-socket stype)))
(p (if (number? port) port 5555))
(old-handler (current-exception-handler)))
(handle-exceptions
exn
(begin
(print-error-message exn)
(if (< portnum 9000)
(begin
(print "WARNING: failed to start on portnum: " portnum ", trying next port")
(thread-sleep! 0.1)
(open-run-close tasks:remove-server-records tasks:open-db)
(server:try-start-server ipaddrstr (+ portnum 1)))
(print "ERROR: Tried and tried but could not start the server")))
(set! *runremote* (list ipaddrstr portnum))
(open-run-close tasks:remove-server-records tasks:open-db)
(open-run-close tasks:server-register
tasks:open-db
(current-process-id)
ipaddrstr portnum 0 'live)
(print "INFO: Trying to start server on " ipaddrstr ":" portnum)
;; This starts the spiffy server
(start-server port: portnum)
(print "INFO: server has been stopped")))
(define (server:mk-signature)
(message-digest-string (md5-primitive)
(with-output-to-string
(lambda ()
(write (list (current-directory)
(argv)))))))
;;======================================================================
;; S E R V E R U T I L I T I E S
;;======================================================================
;; When using zmq this would send the message back (two step process)
;; with spiffy or rpc this simply returns the return data to be returned
;;
(define (server:reply return-addr query-sig success/fail result)
(debug:print-info 11 "server:reply return-addr=" return-addr ", result=" result)
;; (send-message pubsock target send-more: #t)
;; (send-message pubsock
(db:obj->string (vector success/fail query-sig result)))
;;======================================================================
;; C L I E N T S
;;======================================================================
(define (server:get-client-signature)
(if *my-client-signature* *my-client-signature*
(let ((sig (server:mk-signature)))
(set! *my-client-signature* sig)
*my-client-signature*)))
;;
(define (server:client-socket-connect iface port #!key (context #f)(type 'req)(subscriptions '()))
(debug:print-info 3 "client-connect " iface ":" port ", type=" type ", subscriptions=" subscriptions)
(let ((connect-ok #f)
(zmq-socket (if context
(make-socket type context)
(make-socket type)))
(conurl (server:make-server-url (list iface port))))
(if (socket? zmq-socket)
(begin
;; first apply subscriptions
(for-each (lambda (subscription)
(debug:print 2 "Subscribing to " subscription)
(socket-option-set! zmq-socket 'subscribe subscription))
subscriptions)
(connect-socket zmq-socket conurl)
zmq-socket)
(begin
(debug:print 0 "ERROR: Failed to open socket to " conurl)
#f))))
(define (server:client-login serverdat)
(max-retry-attempts 100)
(cdb:login serverdat *toppath* (server:get-client-signature)))
;; Not currently used! But, I think it *should* be used!!!
(define (server:client-logout serverdat)
(let ((ok (and (socket? serverdat)
(cdb:logout serverdat *toppath* (server:get-client-signature)))))
;; (close-socket serverdat)
ok))
(define (server:client-connect iface pullport pubport)
(let* ((push-socket (server:client-socket-connect iface pullport type: 'push))
(sub-socket (server:client-socket-connect iface pubport
type: 'sub
subscriptions: (list (server:get-client-signature) "all")))
(zmq-sockets (vector push-socket sub-socket))
(login-res #f))
(set! login-res (server:client-login zmq-sockets))
(if (and (not (null? login-res))
(car login-res))
(begin
(debug:print-info 2 "Logged in and connected to " iface ":" pullport "/" pubport ".")
(set! *runremote* zmq-sockets)
zmq-sockets)
(begin
(debug:print-info 2 "Failed to login or connect to " conurl)
(set! *runremote* #f)
#f))))
;; Do all the connection work, start a server if not already running
(define (server:client-setup #!key (numtries 50))
(if (not *toppath*)
(if (not (setup-for-run))
(begin
(debug:print 0 "ERROR: failed to find megatest.config, exiting")
(exit))))
(let ((hostinfo (open-run-close tasks:get-best-server tasks:open-db)))
(if hostinfo
(let ((host (list-ref hostinfo 0))
(iface (list-ref hostinfo 1))
(port (list-ref hostinfo 2))
(pubport (list-ref hostinfo 3))
(pid (list-ref hostinfo 4)))
(debug:print-info 2 "Setting up to connect to " hostinfo)
;; (handle-exceptions
;; exn
;; (begin
;; ;; something went wrong in connecting to the server. In this scenario it is ok
;; ;; to try again
;; (debug:print 0 "ERROR: Failed to open a connection to the server at: " hostinfo)
;; (debug:print 0 " EXCEPTION: " ((condition-property-accessor 'exn 'message) exn))
;; (debug:print 0 " perhaps jobs killed with -9? Removing server records")
;; (open-run-close tasks:server-deregister tasks:open-db host pullport: pullport)
;; (server:client-setup (- numtries 1))
;; #f)
(server:client-connect iface port pubport)) ;; )
(if (> numtries 0)
(let ((exe (car (argv)))
(pid #f))
(debug:print-info 0 "No server available, attempting to start one...")
;; (set! pid (process-run exe (list "-server" "-" "-debug" (if (list? *verbosity*)
;; (string-intersperse *verbosity* ",")
;; (conc *verbosity*)))))
(set! pid (process-fork (lambda ()
;; (current-input-port (open-input-file "/dev/null"))
;; (current-output-port (open-output-file "/dev/null"))
;; (current-error-port (open-output-file "/dev/null"))
(server:launch)))) ;; should never get here ....
(let loop ((count 0))
(let ((hostinfo (open-run-close tasks:get-best-server tasks:open-db)))
(if (not hostinfo)
(begin
(debug:print-info 0 "Waiting for server pid=" pid " to start")
(sleep 2) ;; give server time to start
(if (< count 5)
(loop (+ count 1)))))))
;; we are starting a server, do not try again! That can lead to
;; recursively starting many processes!!!
(server:client-setup numtries: 0))
(debug:print-info 1 "Too many attempts, giving up")))))
;; run server:keep-running in a parallel thread to monitor that the db is being
;; used and to shutdown after sometime if it is not.
;;
(define (server:keep-running)
;; if none running or if > 20 seconds since
;; server last used then start shutdown
;; This thread waits for the server to come alive
(let* ((server-info (let loop ()
(let ((sdat #f))
(mutex-lock! *heartbeat-mutex*)
(set! sdat *runremote*)
(mutex-unlock! *heartbeat-mutex*)
(if sdat sdat
(begin
(sleep 4)
(loop))))))
(iface (car server-info))
(port (cadr server-info))
(last-access 0)
(tdb (tasks:open-db))
(spid (tasks:server-get-server-id tdb #f iface port #f)))
(print "Keep-running got server pid " spid ", using iface " iface " and port " port)
(let loop ((count 0))
(thread-sleep! 4) ;; no need to do this very often
;; NB// sync currently does NOT return queue-length
(let () ;; (queue-len (cdb:client-call server-info 'sync #t 1)))
;; (print "Server running, count is " count)
(if (< count 1) ;; 3x3 = 9 secs aprox
(loop (+ count 1)))
;; NOTE: Get rid of this mechanism! It really is not needed...
(tasks:server-update-heartbeat tdb spid)
;; (if ;; (or (> numrunning 0) ;; stay alive for two days after last access
(mutex-lock! *heartbeat-mutex*)
(set! last-access *last-db-access*)
(mutex-unlock! *heartbeat-mutex*)
(if (> (+ last-access
;; (* 50 60 60) ;; 48 hrs
;; 60 ;; one minute
;; (* 60 60) ;; one hour
(* 45 60) ;; 45 minutes, until the db deletion bug is fixed.
)
(current-seconds))
(begin
(debug:print-info 2 "Server continuing, seconds since last db access: " (- (current-seconds) last-access))
(loop 0))
(begin
(debug:print-info 0 "Starting to shutdown the server.")
;; need to delete only *my* server entry (future use)
(set! *time-to-exit* #t)
(tasks:server-deregister-self tdb (get-host-name))
(thread-sleep! 1)
(debug:print-info 0 "Max cached queries was " *max-cache-size*)
(debug:print-info 0 "Server shutdown complete. Exiting")
(exit)))))))
;; all routes though here end in exit ...
(define (server:launch)
(if (not *toppath*)
(if (not (setup-for-run))
(begin
(debug:print 0 "ERROR: cannot find megatest.config, exiting")
(exit))))
(debug:print-info 2 "Starting the standalone server")
(let ((hostinfo (open-run-close tasks:get-best-server tasks:open-db)))
(debug:print 11 "server:launch hostinfo=" hostinfo)
(if hostinfo
(debug:print-info 2 "NOT starting new server, one is already running on " (car hostinfo) ":" (cadr hostinfo))
(if *toppath*
(let* (;; (th1 (make-thread (lambda ()
;; (let ((server-info #f))
;; ;; wait for the server to be online and available
;; (let loop ()
;; (debug:print-info 2 "Waiting for the server to come online before starting heartbeat")
;; (thread-sleep! 2)
;; (mutex-lock! *heartbeat-mutex*)
;; (set! server-info *server-info* )
;; (mutex-unlock! *heartbeat-mutex*)
;; (if (not server-info)(loop)))
;; (debug:print 2 "Server alive, starting self-ping")
;; (server:self-ping server-info)
;; ))
;; "Self ping"))
(th2 (make-thread (lambda ()
(server:run
(if (args:get-arg "-server")
(args:get-arg "-server")
"-"))) "Server run"))
(th3 (make-thread (lambda ()(server:keep-running)) "Keep running"))
)
(set! *client-non-blocking-mode* #t)
;; (thread-start! th1)
(thread-start! th2)
(thread-start! th3)
(set! *didsomething* #t)
;; (thread-join! th3)
(thread-join! th2)
)
(debug:print 0 "ERROR: Failed to setup for megatest")))
(exit)))
(define (server:client-signal-handler signum)
(handle-exceptions
exn
(debug:print " ... exiting ...")
(let ((th1 (make-thread (lambda ()
(if (not *received-response*)
(receive-message* *runremote*))) ;; flush out last call if applicable
"eat response"))
(th2 (make-thread (lambda ()
(debug:print 0 "ERROR: Received ^C, attempting clean exit. Please be patient and wait a few seconds before hitting ^C again.")
(thread-sleep! 3) ;; give the flush three seconds to do it's stuff
(debug:print 0 " Done.")
(exit 4))
"exit on ^C timer")))
(thread-start! th2)
(thread-start! th1)
(thread-join! th2))))
(define (server:client-launch)
(set-signal-handler! signal/int server:client-signal-handler)
(if (server:client-setup)
(debug:print-info 2 "connected as client")
(begin
(debug:print 0 "ERROR: Failed to connect as client")
(exit))))
;;======================================================================
;; Defunct functions
;;======================================================================
;; ping a server and return number of clients or #f (if no response)
;; NOT IN USE!
(define (server:ping host port #!key (secs 10)(return-socket #f))
(cdb:use-non-blocking-mode
(lambda ()
(let* ((res #f)
(th1 (make-thread
(lambda ()
(let* ((zmq-context (make-context 1))
(zmq-socket (server:client-connect host port context: zmq-context)))
(if zmq-socket
(if (server:client-login zmq-socket)
(let ((numclients (cdb:num-clients zmq-socket)))
(if (not return-socket)
(begin
(server:client-logout zmq-socket)
(close-socket zmq-socket)))
(set! res (list #t numclients (if return-socket zmq-socket #f))))
(begin
;; (close-socket zmq-socket)
(set! res (list #f "CAN'T LOGIN" #f))))
(set! res (list #f "CAN'T CONNECT" #f)))))
"Ping: th1"))
(th2 (make-thread
(lambda ()
(let loop ((count 1))
(debug:print-info 1 "Ping " count " server on " host " at port " port)
(thread-sleep! 2)
(if (< count (/ secs 2))
(loop (+ count 1))))
;; (thread-terminate! th1)
(set! res (list #f "TIMED OUT" #f)))
"Ping: th2")))
(thread-start! th2)
(thread-start! th1)
(handle-exceptions
exn
(set! res (list #f "TIMED OUT" #f))
(thread-join! th1 secs))
res))))
;; (define (server:self-ping server-info)
;; ;; server-info: server-id interface pullport pubport
;; (let ((iface (list-ref server-info 1))
;; (pullport (list-ref server-info 2))
;; (pubport (list-ref server-info 3)))
;; (server:client-connect iface pullport pubport)
;; (let loop ()
;; (thread-sleep! 2)
;; (cdb:client-call *runremote* 'ping #t)
;; (debug:print 4 "server:self-ping - I'm alive on " iface ":" pullport "/" pubport "!")
;; (mutex-lock! *heartbeat-mutex*)
;; (set! *server-loop-heart-beat* (current-seconds))
;; (mutex-unlock! *heartbeat-mutex*)
;; (loop))))
(define (server:reply pubsock target query-sig success/fail result)
(debug:print-info 11 "server:reply target=" target ", result=" result)
(send-message pubsock target send-more: #t)
(send-message pubsock (db:obj->string (vector success/fail query-sig result))))