Megatest

rmt.scm at [187be74df3]
Login

File rmt.scm artifact 434920ac36 part of check-in 187be74df3


;;======================================================================
;; Copyright 2006-2013, Matthew Welland.
;; 
;;  This program is made available under the GNU GPL version 2.0 or
;;  greater. See the accompanying file COPYING for details.
;; 
;;  This program is distributed WITHOUT ANY WARRANTY; without even the
;;  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
;;  PURPOSE.
;;======================================================================

(use json format)

(declare (unit rmt))
(declare (uses api))
(declare (uses tdb))
(declare (uses http-transport))
(declare (uses nmsg-transport))

;;
;; THESE ARE ALL CALLED ON THE CLIENT SIDE!!!
;;

;; ;; For debugging add the following to ~/.megatestrc
;;
;; (require-library trace)
;; (import trace)
;; (trace
;; rmt:send-receive
;; api:execute-requests
;; )


;;======================================================================
;;  S U P P O R T   F U N C T I O N S
;;======================================================================

;; NOT USED
;;
(define (rmt:call-transport run-id connection-info cmd jparams)
  (case (server:get-transport)
    ((rpc)  ( rpc-transport:client-api-send-receive run-id connection-info cmd jparams))
    ((http) (http-transport:client-api-send-receive run-id connection-info cmd jparams))
    ((fs)   ( fs-transport:client-api-send-receive run-id connection-info cmd jparams))
    ((zmq)  (zmq-transport:client-api-send-receive run-id connection-info cmd jparams))
    (else   ( rpc-transport:client-api-send-receive run-id connection-info cmd jparams))))

;;
(define (rmt:write-frequency-over-limit? cmd run-id)
  (and (not (member cmd api:read-only-queries))
       (let* ((tmprec (hash-table-ref/default *write-frequency* run-id #f))
	      (record (if tmprec tmprec 
			  (let ((v (vector (current-seconds) 0)))
			    (hash-table-set! *write-frequency* run-id v)
			    v)))
	      (count  (+ 1 (vector-ref record 1)))
	      (start  (vector-ref record 0))
	      (queries-per-second (/ (* count 1.0)
				     (max (- (current-seconds) start) 1))))
	 (vector-set! record 1 count)
	 (if (and (> count 10)
		  (> queries-per-second 10))
	     (begin
	       (debug:print-info 1 "db write rate too high, starting a server, count=" count " start=" start " run-id=" run-id " queries-per-second=" queries-per-second)
	       #t)
	     #f))))

(define (rmt:get-connection-info run-id)
  (let ((cinfo (hash-table-ref/default *runremote* run-id #f)))
    (if cinfo
	cinfo
	;; NB// can cache the answer for server running for 10 seconds ...
	;;  ;; (and (not (rmt:write-frequency-over-limit? cmd run-id))
	(if (tasks:server-running-or-starting? (db:delay-if-busy (tasks:open-db)) run-id)
	    (client:setup run-id)
	    #f))))

(define *send-receive-mutex* (make-mutex)) ;; should have separate mutex per run-id
(define (rmt:send-receive cmd rid params #!key (attemptnum 1)) ;; start attemptnum at 1 so the modulo below works as expected
  ;; clean out old connections
  (mutex-lock! *db-multi-sync-mutex*)
  (let ((expire-time (- (current-seconds) (server:get-timeout) 10))) ;; don't forget the 10 second margin
    (for-each 
     (lambda (run-id)
       (let ((connection (hash-table-ref/default *runremote* run-id #f)))
         (if (and (vector? connection)
        	  (< (http-transport:server-dat-get-last-access connection) expire-time))
             (begin
               (debug:print-info 0 "Discarding connection to server for run-id " run-id ", too long between accesses")
               ;; SHOULD CLOSE THE CONNECTION HERE
	       (case *transport-type*
		 ((nmsg)(nn-close (http-transport:server-dat-get-socket 
				   (hash-table-ref *runremote* run-id)))))
               (hash-table-delete! *runremote* run-id)))))
     (hash-table-keys *runremote*)))
  (mutex-unlock! *db-multi-sync-mutex*)
  ;; (mutex-lock! *send-receive-mutex*)
  (let* ((run-id          (if rid rid 0))
	 (connection-info (rmt:get-connection-info run-id)))
    ;; the nmsg method does the encoding under the hood (the http method should be changed to do this also)
    (if connection-info
	;; use the server if have connection info
	(let* ((dat     (case *transport-type*
			  ((http)(condition-case
				  (http-transport:client-api-send-receive run-id connection-info cmd params)
				  ((commfail)(vector #f "communications fail"))))
			  ((nmsg)(condition-case
				  (nmsg-transport:client-api-send-receive run-id connection-info cmd params)
				  ((timeout)(vector #f "timeout talking to server"))))
			  (else  (exit))))
	       (success (if (vector? dat) (vector-ref dat 0) #f))
	       (res     (if (vector? dat) (vector-ref dat 1) #f)))
	  (if (vector? connection-info)(http-transport:server-dat-update-last-access connection-info))
	  (if success
	      (begin
		;; (mutex-unlock! *send-receive-mutex*)
		(case *transport-type* 
		  ((http) res) ;; (db:string->obj res))
		  ((nmsg) res))) ;; (vector-ref res 1)))
	      (begin ;; let ((new-connection-info (client:setup run-id)))
		(debug:print 0 "WARNING: Communication failed, trying call to rmt:send-receive again.")
		;; (case *transport-type*
		;;   ((nmsg)(nn-close (http-transport:server-dat-get-socket connection-info))))
		(hash-table-delete! *runremote* run-id) ;; don't keep using the same connection
		;; NOTE: killing server causes this process to block forever. No idea why. Dec 2. 
		;; (if (eq? (modulo attemptnum 5) 0)
		;;     (tasks:kill-server-run-id run-id tag: "api-send-receive-failed"))
		;; (mutex-unlock! *send-receive-mutex*) ;; close the mutex here to allow other threads access to communications
		(tasks:start-and-wait-for-server (tasks:open-db) run-id 15)
		;; (nmsg-transport:client-api-send-receive run-id connection-info cmd param remtries: (- remtries 1))))))

		;; no longer killing the server in http-transport:client-api-send-receive
		;; may kill it here but what are the criteria?
		;; start with three calls then kill server
		;; (if (eq? attemptnum 3)(tasks:kill-server-run-id run-id))
		;; (thread-sleep! 2)
		(rmt:send-receive cmd run-id params attemptnum: (+ attemptnum 1)))))
	;; no connection info? try to start a server
	(if (and (< attemptnum 15)
		 (member cmd api:write-queries))
	    (begin
	      (hash-table-delete! *runremote* run-id)
	      ;; (mutex-unlock! *send-receive-mutex*)
	      (tasks:start-and-wait-for-server (db:delay-if-busy (tasks:open-db)) run-id 10)
	      ;; (client:setup run-id) ;; client setup happens in rmt:get-connection-info
	      (thread-sleep! (random 5)) ;; give some time to settle and minimize collison?
	      (rmt:send-receive cmd rid params attemptnum: (+ attemptnum 1)))
	    (begin
	      ;; (debug:print 0 "ERROR: Communication failed!")
	      ;; (mutex-unlock! *send-receive-mutex*)
	      ;; (exit)
	      (rmt:open-qry-close-locally cmd run-id params)
	      )))))

(define (rmt:update-db-stats run-id rawcmd params duration)
  (mutex-lock! *db-stats-mutex*)
  (handle-exceptions
   exn
   (begin
     (debug:print 0 "WARNING: stats collection failed in update-db-stats")
     (debug:print 0 " message: " ((condition-property-accessor 'exn 'message) exn))
     (print "exn=" (condition->list exn))
     #f) ;; if this fails we don't care, it is just stats
   (let* ((cmd      (conc "run-id=" run-id " " (if (eq? rawcmd 'general-call) (car params) rawcmd)))
	  (stat-vec (hash-table-ref/default *db-stats* cmd #f)))
     (if (not (vector? stat-vec))
	 (let ((newvec (vector 0 0)))
	   (hash-table-set! *db-stats* cmd newvec)
	   (set! stat-vec newvec)))
     (vector-set! stat-vec 0 (+ (vector-ref stat-vec 0) 1))
     (vector-set! stat-vec 1 (+ (vector-ref stat-vec 1) duration))))
  (mutex-unlock! *db-stats-mutex*))


(define (rmt:print-db-stats)
  (let ((fmtstr "~40a~7-d~9-d~20,2-f")) ;; "~20,2-f"
    (debug:print 18 "DB Stats\n========")
    (debug:print 18 (format #f "~40a~8a~10a~10a" "Cmd" "Count" "TotTime" "Avg"))
    (for-each (lambda (cmd)
		(let ((cmd-dat (hash-table-ref *db-stats* cmd)))
		  (debug:print 18 (format #f fmtstr cmd (vector-ref cmd-dat 0) (vector-ref cmd-dat 1) (/ (vector-ref cmd-dat 1)(vector-ref cmd-dat 0))))))
	      (sort (hash-table-keys *db-stats*)
		    (lambda (a b)
		      (> (vector-ref (hash-table-ref *db-stats* a) 0)
			 (vector-ref (hash-table-ref *db-stats* b) 0)))))))

(define (rmt:get-max-query-average run-id)
  (mutex-lock! *db-stats-mutex*)
  (let* ((runkey (conc "run-id=" run-id " "))
	 (cmds   (filter (lambda (x)
			   (substring-index runkey x))
			 (hash-table-keys *db-stats*)))
	 (res    (if (null? cmds)
		     (cons 'none 0)
		     (let loop ((cmd (car cmds))
				(tal (cdr cmds))
				(max-cmd (car cmds))
				(res 0))
		       (let* ((cmd-dat (hash-table-ref *db-stats* cmd))
			      (tot     (vector-ref cmd-dat 0))
			      (curravg (/ (vector-ref cmd-dat 1) (vector-ref cmd-dat 0))) ;; count is never zero by construction
			      (currmax (max res curravg))
			      (newmax-cmd (if (> curravg res) cmd max-cmd)))
			 (if (null? tal)
			     (if (> tot 10)
				 (cons newmax-cmd currmax)
				 (cons 'none 0))
			     (loop (car tal)(cdr tal) newmax-cmd currmax)))))))
    (mutex-unlock! *db-stats-mutex*)
    res))
	  
(define (rmt:open-qry-close-locally cmd run-id params)
  (let* ((dbstruct-local (if *dbstruct-db*
			     *dbstruct-db*
			     (let* ((dbdir (conc    (configf:lookup *configdat* "setup" "linktree") "/.db"))
				    (db (make-dbr:dbstruct path:  dbdir local: #t)))
			       (set! *dbstruct-db* db)
			       db)))
	 (db-file-path   (db:dbfile-path 0)))
    ;; (read-only      (not (file-read-access? db-file-path)))
    (let* ((start         (current-milliseconds))
	   (resdat        (api:execute-requests dbstruct-local (vector (symbol->string cmd) params)))
	   (res           (vector-ref resdat 1))
	   (duration      (- (current-milliseconds) start)))
      (rmt:update-db-stats run-id cmd params duration)
      ;; mark this run as dirty if this was a write
      (if (not (member cmd api:read-only-queries))
	  (let ((start-time (current-seconds)))
	    (mutex-lock! *db-multi-sync-mutex*)
	    ;; (if (not (hash-table-ref/default *db-local-sync* run-id #f))
	    ;; just set it every time. Is a write more expensive than a read and does it matter?
	    (hash-table-set! *db-local-sync* (or run-id 0) start-time) ;; the oldest "write"
	    (mutex-unlock! *db-multi-sync-mutex*)))
      res)))

(define (rmt:send-receive-no-auto-client-setup connection-info cmd run-id params)
  (let* ((run-id   (if run-id run-id 0))
	 ;; (jparams  (db:obj->string params)) ;; (rmt:dat->json-str params))
	 (res  	   (condition-case
		    (http-transport:client-api-send-receive run-id connection-info cmd params)
		    ((commfail) #f)))) ;; (vector #f "communications fail")))))
    (if (and res (vector-ref res 0))
	res
	#f)))
;; 	(db:string->obj (vector-ref dat 1))
;; 	(begin
;; 	  (debug:print 0 "ERROR: rmt:send-receive-no-auto-client-setup failed, attempting to continue. Got " dat)
;; 	  dat))))

;; Wrap json library for strings (why the ports crap in the first place?)
(define (rmt:dat->json-str dat)
  (with-output-to-string 
    (lambda ()
      (json-write dat))))

(define (rmt:json-str->dat json-str)
  (with-input-from-string json-str
    (lambda ()
      (json-read))))

;;======================================================================
;;
;; A C T U A L   A P I   C A L L S  
;;
;;======================================================================

;;======================================================================
;;  S E R V E R
;;======================================================================

(define (rmt:kill-server run-id)
  (rmt:send-receive 'kill-server run-id (list run-id)))

(define (rmt:start-server run-id)
  (rmt:send-receive 'start-server 0 (list run-id)))

;;======================================================================
;;  M I S C
;;======================================================================

(define (rmt:login run-id)
  (rmt:send-receive 'login run-id (list *toppath* megatest-version run-id *my-client-signature*)))

;; This login does no retries under the hood - it acts a bit like a ping.
;; Deprecated for nmsg-transport.
;;
(define (rmt:login-no-auto-client-setup connection-info run-id)
  (case *transport-type*
    ((http)(rmt:send-receive-no-auto-client-setup connection-info 'login run-id (list *toppath* megatest-version run-id *my-client-signature*)))
    ((nmsg)(nmsg-transport:client-api-send-receive run-id connection-info 'login (list *toppath* megatest-version run-id *my-client-signature*)))))

;; hand off a call to one of the db:queries statements
;; added run-id to make looking up the correct db possible 
;;
(define (rmt:general-call stmtname run-id . params)
  (rmt:send-receive 'general-call run-id (append (list stmtname run-id) params)))

(define (rmt:sync-inmem->db run-id)
  (rmt:send-receive 'sync-inmem->db run-id '()))

(define (rmt:sdb-qry qry val run-id)
  ;; add caching if qry is 'getid or 'getstr
  (rmt:send-receive 'sdb-qry run-id (list qry val)))

;; NOT COMPLETED
(define (rmt:runtests user run-id testpatt params)
  (rmt:send-receive 'runtests run-id testpatt))

;;======================================================================
;;  K E Y S 
;;======================================================================

;; These require run-id because the values come from the run!
;;
(define (rmt:get-key-val-pairs run-id)
  (rmt:send-receive 'get-key-val-pairs run-id (list run-id)))

(define (rmt:get-keys)
  (rmt:send-receive 'get-keys #f '()))

;;======================================================================
;;  T E S T S
;;======================================================================

(define (rmt:get-test-id run-id testname item-path)
  (rmt:send-receive 'get-test-id run-id (list run-id testname item-path)))

(define (rmt:get-test-info-by-id run-id test-id)
  (if (and (number? run-id)(number? test-id))
      (rmt:send-receive 'get-test-info-by-id run-id (list run-id test-id))
      (begin
	(debug:print 0 "WARNING: Bad data handed to rmt:get-test-info-by-id run-id=" run-id ", test-id=" test-id)
	(print-call-chain (current-error-port))
	#f)))

(define (rmt:test-get-rundir-from-test-id run-id test-id)
  (rmt:send-receive 'test-get-rundir-from-test-id run-id (list run-id test-id)))

(define (rmt:open-test-db-by-test-id run-id test-id #!key (work-area #f))
  (let* ((test-path (if (string? work-area)
			work-area
			(rmt:test-get-rundir-from-test-id run-id test-id))))
    (debug:print 3 "TEST PATH: " test-path)
    (open-test-db test-path)))

;; WARNING: This currently bypasses the transaction wrapped writes system
(define (rmt:test-set-state-status-by-id run-id test-id newstate newstatus newcomment)
  (rmt:send-receive 'test-set-state-status-by-id run-id (list run-id test-id newstate newstatus newcomment)))

(define (rmt:set-tests-state-status run-id testnames currstate currstatus newstate newstatus)
  (rmt:send-receive 'set-tests-state-status run-id (list run-id testnames currstate currstatus newstate newstatus)))

(define (rmt:get-tests-for-run run-id testpatt states statuses offset limit not-in sort-by sort-order qryvals)
  (if (number? run-id)
      (rmt:send-receive 'get-tests-for-run run-id (list run-id testpatt states statuses offset limit not-in sort-by sort-order qryvals))
      (begin
	(debug:print "ERROR: rmt:get-tests-for-run called with bad run-id=" run-id)
	(print-call-chain (current-error-port))
	'())))

;; IDEA: Threadify these - they spend a lot of time waiting ...
;;
(define (rmt:get-tests-for-runs-mindata run-ids testpatt states status not-in)
  (let ((multi-run-mutex (make-mutex))
	(run-id-list (if run-ids
			 run-ids
			 (rmt:get-all-run-ids)))
	(result      '()))
    (if (null? run-id-list)
	'()
	(let loop ((hed     (car run-id-list))
		   (tal     (cdr run-id-list))
		   (threads '()))
	  (if (> (length threads) 5)
	      (loop hed tal (filter (lambda (th)(not (member (thread-state th) '(terminated dead)))) threads))
	      (let* ((newthread (make-thread
				 (lambda ()
				   (let ((res (rmt:send-receive 'get-tests-for-run-mindata hed (list hed testpatt states status not-in))))
				     (if (list? res)
					 (begin
					   (mutex-lock! multi-run-mutex)
					   (set! result (append result res))
					   (mutex-unlock! multi-run-mutex))
					 (debug:print 0 "ERROR: get-tests-for-run-mindata failed for run-id " hed ", testpatt " testpatt ", states " states ", status " status ", not-in " not-in))))
				 (conc "multi-run-thread for run-id " hed)))
		     (newthreads (cons newthread threads)))
		(thread-start! newthread)
		(thread-sleep! 0.5) ;; give that thread some time to start
		(if (null? tal)
		    newthreads
		    (loop (car tal)(cdr tal) newthreads))))))
    result))

;; ;; IDEA: Threadify these - they spend a lot of time waiting ...
;; ;;
;; (define (rmt:get-tests-for-runs-mindata run-ids testpatt states status not-in)
;;   (let ((run-id-list (if run-ids
;; 			 run-ids
;; 			 (rmt:get-all-run-ids))))
;;     (apply append (map (lambda (run-id)
;; 			 (rmt:send-receive 'get-tests-for-run-mindata run-id (list run-ids testpatt states status not-in)))
;; 		       run-id-list))))

(define (rmt:delete-test-records run-id test-id)
  (rmt:send-receive 'delete-test-records run-id (list run-id test-id)))

;; This is not needed as test steps are deleted on test delete call
;;
;; (define (rmt:delete-test-step-records run-id test-id)
;;   (rmt:send-receive 'delete-test-step-records run-id (list run-id test-id)))

(define (rmt:test-set-status-state run-id test-id status state msg)
  (rmt:send-receive 'test-set-status-state run-id (list run-id test-id status state msg)))

(define (rmt:test-toplevel-num-items run-id test-name)
  (rmt:send-receive 'test-toplevel-num-items run-id (list run-id test-name)))

;; (define (rmt:get-previous-test-run-record run-id test-name item-path)
;;   (rmt:send-receive 'get-previous-test-run-record run-id (list run-id test-name item-path)))

(define (rmt:get-matching-previous-test-run-records run-id test-name item-path)
  (rmt:send-receive 'get-matching-previous-test-run-records run-id (list run-id test-name item-path)))

(define (rmt:test-get-logfile-info run-id test-name)
  (rmt:send-receive 'test-get-logfile-info run-id (list run-id test-name)))

(define (rmt:test-get-records-for-index-file run-id test-name)
  (rmt:send-receive 'test-get-records-for-index-file run-id (list run-id test-name)))

(define (rmt:get-testinfo-state-status run-id test-id)
  (rmt:send-receive 'get-testinfo-state-status run-id (list run-id test-id)))

(define (rmt:test-set-log! run-id test-id logf)
  (if (string? logf)(rmt:general-call 'test-set-log run-id logf test-id)))

(define (rmt:test-set-top-process-pid run-id test-id pid)
  (rmt:send-receive 'test-set-top-process-pid run-id (list run-id test-id pid)))

(define (rmt:test-get-top-process-pid run-id test-id)
  (rmt:send-receive 'test-get-top-process-pid run-id (list run-id test-id)))

(define (rmt:get-run-ids-matching-target keynames target res runname testpatt statepatt statuspatt)
  (rmt:send-receive 'get-run-ids-matching-target #f (list keynames target res runname testpatt statepatt statuspatt)))

;; NOTE: This will open and access ALL run databases. 
;;
(define (rmt:test-get-paths-matching-keynames-target-new keynames target res testpatt statepatt statuspatt runname)
  (let ((run-ids (rmt:get-run-ids-matching-target keynames target res runname testpatt statepatt statuspatt)))
    (apply append 
	   (map (lambda (run-id)
		  (rmt:send-receive 'test-get-paths-matching-keynames-target-new run-id (list run-id keynames target res testpatt statepatt statuspatt runname)))
	   run-ids))))

(define (rmt:get-run-ids-matching keynames target res)
  (rmt:send-receive #f 'get-run-ids-matching (list keynames target res)))

(define (rmt:get-prereqs-not-met run-id waitons ref-item-path #!key (mode '(normal)))
  (rmt:send-receive 'get-prereqs-not-met run-id (list run-id waitons ref-item-path mode)))

(define (rmt:get-count-tests-running-for-run-id run-id)
  (rmt:send-receive 'get-count-tests-running-for-run-id run-id (list run-id)))

;; Statistical queries

(define (rmt:get-count-tests-running run-id)
  (rmt:send-receive 'get-count-tests-running run-id (list run-id)))

(define (rmt:get-count-tests-running-in-jobgroup run-id jobgroup)
  (rmt:send-receive 'get-count-tests-running-in-jobgroup run-id (list run-id jobgroup)))

(define (rmt:roll-up-pass-fail-counts run-id test-name item-path status)
  (rmt:send-receive 'roll-up-pass-fail-counts run-id (list run-id test-name item-path status)))

(define (rmt:update-pass-fail-counts run-id test-name)
  (rmt:general-call 'update-fail-pass-counts run-id (list run-id test-name run-id test-name run-id test-name)))

;;======================================================================
;;  R U N S
;;======================================================================

(define (rmt:get-run-info run-id)
  (rmt:send-receive 'get-run-info run-id (list run-id)))

;; Use the special run-id == #f scenario here since there is no run yet
(define (rmt:register-run keyvals runname state status user)
  (rmt:send-receive 'register-run #f (list keyvals runname state status user)))
    
(define (rmt:get-run-name-from-id run-id)
  (rmt:send-receive 'get-run-name-from-id run-id (list run-id)))

(define (rmt:delete-run run-id)
  (rmt:send-receive 'delete-run run-id (list run-id)))

(define (rmt:delete-old-deleted-test-records)
  (rmt:send-receive 'delete-old-deleted-test-records #f '()))

(define (rmt:get-runs runpatt count offset keypatts)
  (rmt:send-receive 'get-runs #f (list runpatt count offset keypatts)))

(define (rmt:get-runs runpatt count offset keypatts)
  (rmt:send-receive 'get-runs #f (list runpatt count offset keypatts)))

(define (rmt:get-all-run-ids)
  (rmt:send-receive 'get-all-run-ids #f '()))

(define (rmt:get-prev-run-ids run-id)
  (rmt:send-receive 'get-prev-run-ids #f (list run-id)))

(define (rmt:lock/unlock-run run-id lock unlock user)
  (rmt:send-receive 'lock/unlock-run #f (list run-id lock unlock user)))

;; set/get status
(define (rmt:get-run-status run-id)
  (rmt:send-receive 'get-run-status #f (list run-id)))

(define (rmt:set-run-status run-id run-status #!key (msg #f))
  (rmt:send-receive 'set-run-status #f (list run-id run-status msg)))

(define (rmt:update-run-event_time run-id)
  (rmt:send-receive 'update-run-event_time #f (list run-id)))

(define (rmt:get-runs-by-patt  keys runnamepatt targpatt offset limit)
  (rmt:send-receive 'get-runs-by-patt #f (list keys runnamepatt targpatt offset limit)))

(define (rmt:find-and-mark-incomplete run-id ovr-deadtime)
  (if (rmt:send-receive 'have-incompletes? run-id (list run-id ovr-deadtime))
      (rmt:send-receive 'mark-incomplete run-id (list run-id ovr-deadtime))))

;;======================================================================
;; M U L T I R U N   Q U E R I E S
;;======================================================================

;; Need to move this to multi-run section and make associated changes
(define (rmt:find-and-mark-incomplete-all-runs #!key (ovr-deadtime #f))
  (let ((run-ids (rmt:get-all-run-ids)))
    (for-each (lambda (run-id)
	       (rmt:find-and-mark-incomplete run-id ovr-deadtime))
	     run-ids)))

;; get the previous record for when this test was run where all keys match but runname
;; returns #f if no such test found, returns a single test record if found
;; 
;; Run this at the client end since we have to connect to multiple run-id dbs
;;
(define (rmt:get-previous-test-run-record run-id test-name item-path)
  (let* ((keyvals (rmt:get-key-val-pairs run-id))
	 (keys    (rmt:get-keys))
	 (selstr  (string-intersperse  keys ","))
	 (qrystr  (string-intersperse (map (lambda (x)(conc x "=?")) keys) " AND ")))
    (if (not keyvals)
	#f
	(let ((prev-run-ids (rmt:get-prev-run-ids run-id)))
	  ;; for each run starting with the most recent look to see if there is a matching test
	  ;; if found then return that matching test record
	  (debug:print 4 "selstr: " selstr ", qrystr: " qrystr ", keyvals: " keyvals ", previous run ids found: " prev-run-ids)
	  (if (null? prev-run-ids) #f
	      (let loop ((hed (car prev-run-ids))
			 (tal (cdr prev-run-ids)))
		(let ((results (rmt:get-tests-for-run hed (conc test-name "/" item-path) '() '() #f #f #f #f #f #f)))
		  (debug:print 4 "Got tests for run-id " run-id ", test-name " test-name ", item-path " item-path ": " results)
		  (if (and (null? results)
			   (not (null? tal)))
		      (loop (car tal)(cdr tal))
		      (if (null? results) #f
			  (car results))))))))))

;;======================================================================
;;  S T E P S
;;======================================================================

;; Getting steps is more complicated.
;;
;; If given work area 
;;  1. Find the testdat.db file
;;  2. Open the testdat.db file and do the query
;; If not given the work area
;;  1. Do a remote call to get the test path
;;  2. Continue as above
;; 
(define (rmt:get-steps-for-test run-id test-id)
  (rmt:send-receive 'get-steps-data run-id (list test-id)))

(define (rmt:teststep-set-status! run-id test-id teststep-name state-in status-in comment logfile)
  (let* ((state     (items:check-valid-items "state" state-in))
	 (status    (items:check-valid-items "status" status-in)))
    (if (or (not state)(not status))
	(debug:print 3 "WARNING: Invalid " (if status "status" "state")
		     " value \"" (if status state-in status-in) "\", update your validvalues section in megatest.config"))
    (rmt:send-receive 'teststep-set-status! run-id (list run-id test-id teststep-name state-in status-in comment logfile))))

(define (rmt:get-steps-for-test run-id test-id)
  (rmt:send-receive 'get-steps-for-test run-id (list test-id)))

;;======================================================================
;;  T E S T   D A T A 
;;======================================================================

(define (rmt:read-test-data run-id test-id categorypatt #!key (work-area #f)) 
  (let ((tdb  (rmt:open-test-db-by-test-id run-id test-id work-area: work-area)))
    (if tdb
	(tdb:read-test-data tdb test-id categorypatt)
	'())))

(define (rmt:testmeta-add-record testname)
  (rmt:send-receive 'testmeta-add-record #f (list testname)))

(define (rmt:testmeta-get-record testname)
  (rmt:send-receive 'testmeta-get-record #f (list testname)))

(define (rmt:testmeta-update-field test-name fld val)
  (rmt:send-receive 'testmeta-update-field #f (list test-name fld val)))

(define (rmt:test-data-rollup run-id test-id status)
  (rmt:send-receive 'test-data-rollup run-id (list run-id test-id status)))

(define (rmt:csv->test-data run-id test-id csvdata)
  (rmt:send-receive 'csv->test-data run-id (list run-id test-id csvdata)))

;;======================================================================
;;  T A S K S
;;======================================================================

(define (rmt:tasks-find-task-queue-records target run-name test-patt state-patt action-patt)
  (rmt:send-receive 'find-task-queue-records #f (list target run-name test-patt state-patt action-patt)))

(define (rmt:tasks-add action owner target runname testpatt params)
  (rmt:send-receive 'tasks-add #f (list action owner target runname testpatt params)))

(define (rmt:tasks-set-state-given-param-key param-key new-state)
  (rmt:send-receive 'tasks-set-state-given-param-key #f (list  param-key new-state)))

;;======================================================================
;; A R C H I V E S
;;======================================================================

(define (rmt:archive-get-allocations  testname itempath dneeded)
  (rmt:send-receive 'archive-get-allocations #f (list testname itempath dneeded)))