Megatest

      (debug:print-info 3 *default-log-port* "Sync of newdb to olddb completed in " sync-time " seconds pid="(current-process-id))
      (if (common:low-noise-print 30 "sync new to old")
          (if sync-needed
              (debug:print-info 0 *default-log-port* "Sync of " res " records from newdb to olddb completed in " sync-time " seconds pid="(current-process-id))
              (debug:print-info 0 *default-log-port* "No sync needed, last updated " (- start-time last-update) " seconds ago")))
      res))

;; keeping it around for debugging purposes only
#;(define (open-run-close-no-exception-handling  proc idb . params)
  (debug:print-info 11 *default-log-port* "open-run-close-no-exception-handling START given a db=" (if idb "yes " "no ") ", params=" params)
  (print "I don't work anymore. open-run-close-no-exception-handling needs fixing or removing...")
  (exit)
  (if (or *db-write-access*
	  (not #t)) ;; was: (member proc * db:all-write-procs *)))
      (let* ((db (cond
		  ((pair? idb)                 (db:dbdat-get-db idb))
		  ((sqlite3:database? idb)     idb)
		  ((not idb)                   (debug:print-error 0 *default-log-port* "cannot open-run-close with #f anymore"))
		  ((procedure? idb)            (idb))
		  (else   	               (debug:print-error 0 *default-log-port* "cannot open-run-close with #f anymore"))))
	     (res #f))
	(set! res (apply proc db params))
	(if (not idb)(sqlite3:finalize! dbstruct))
	(debug:print-info 11 *default-log-port* "open-run-close-no-exception-handling END" )
	res)
      #f))

#;(define (open-run-close-exception-handling proc idb . params)
  (handle-exceptions
   exn
   (let ((sleep-time (random 30))
	 (err-status ((condition-property-accessor 'sqlite3 'status #f) exn)))
     (case err-status
       ((busy)
	(thread-sleep! sleep-time))
       (else
	(debug:print 0 *default-log-port* "EXCEPTION: database probably overloaded or unreadable.")
	(debug:print 0 *default-log-port* " message: " ((condition-property-accessor 'exn 'message) exn))
	(debug:print 5 *default-log-port* "exn=" (condition->list exn))
	(debug:print 0 *default-log-port* " status:  " ((condition-property-accessor 'sqlite3 'status) exn))
	(print-call-chain (current-error-port))
	(thread-sleep! sleep-time)
	(debug:print-info 0 *default-log-port* "trying db call one more time....this may never recover, if necessary kill process " (current-process-id) " on host " (get-host-name) " to clean up")))
     (apply open-run-close-exception-handling proc idb params))
   (apply open-run-close-no-exception-handling proc idb params)))

;; (define open-run-close 
#;(define open-run-close open-run-close-exception-handling)
		;;	   open-run-close-no-exception-handling
;;			   open-run-close-exception-handling)
;;)

(define db:trigger-list 
     (list (list "update_runs_trigger"  "CREATE TRIGGER IF NOT EXISTS update_runs_trigger AFTER UPDATE ON runs
                             FOR EACH ROW
                               BEGIN 
                                 UPDATE runs SET last_update=(strftime('%s','now'))
                                   WHERE id=old.id;
                               END;" ) 

	(lambda (id archive-disk-id disk-path last-du last-du-time creation-time)
	  (set! res (vector id archive-disk-id disk-path last-du last-du-time creation-time)))
	db
	"SELECT id,archive_disk_id,disk_path,last_du,last_du_time,creation_time FROM archive_blocks WHERE id=?;"
	archive-block-id)
       res))))

;; (define (db:archive-allocate-testsuite/area-to-block block-id testsuite-name areakey)
;;   (let* ((dbdat        (db:get-db dbstruct #f)) ;; archive tables are in main.db
;; 	 (db           (db:dbdat-get-db dbdat))
;; 	 (res          '())
;; 	 (blocks       '())) ;; a block is an archive chunck that can be added too if there is space
;;     (sqlite3:for-each-row  #f)

;;======================================================================
;; L O G G I N G    D B 
;;======================================================================

(define (open-logging-db)
  (let* ((dbpath    (conc (if *toppath* (conc *toppath* "/") "") "logging.db")) ;; fname)
	 (dbexists  (common:file-exists? dbpath))

	 (begin
	   (debug:print-error 0 *default-log-port* "reception failed. Received \"" msg "\" but cannot translate it.")
           (print-call-chain (current-error-port))
	   msg))) ;; crude reply for when things go awry
    ((zmq nmsg)(with-input-from-string msg (lambda ()(deserialize))))
    (else msg))) ;; rpc

;; ; This is to be the big daddy call NOPE: Replaced by db:set-state-status-and-roll-up-items
;; ;
;; define (db:test-set-state-status dbstruct run-id test-id state status msg)
;;  (let ((dbdat  (db:get-db dbstruct run-id)))
;;    (if (member state '("LAUNCHED" "REMOTEHOSTSTART"))
;; 	(db:general-call dbdat 'set-test-start-time (list test-id)))
;;    ;; (if msg
;;    ;; 	(db:general-call dbdat 'state-status-msg (list state status msg test-id))
;;    ;; 	(db:general-call dbdat 'state-status     (list state status test-id)))
;;    (db:set-state-status-and-roll-up-items dbstruct run-id test-id #f state status msg)
;;    ;; process the test_data table
;;    (if (and test-id state status (equal? status "AUTO")) 
;; 	(db:test-data-rollup dbstruct run-id test-id status))
;;    (mt:process-triggers dbstruct run-id test-id state status)))

;; state is the priority rollup of all states
;; status is the priority rollup of all completed statesfu
;;
;; if test-name is an integer work off that instead of test-name test-path
;;
(define (db:set-state-status-and-roll-up-items dbstruct run-id test-name item-path state status comment)
  ;; establish info on incoming test followed by info on top level test

           (all-curr-statuses    (common:special-sort  ;; worst -> best
                                    (delete-duplicates
                                      (if (and state status (not (member state *common:dont-roll-up-states*)))
                                          (cons status (map dbr:counts-status state-status-counts))
                                          (map dbr:counts-status state-status-counts)))
                                                   *common:std-statuses* >))
           (non-completes        (filter (lambda (x)
							 										 (not (member x (cons "COMPLETED" *common:dont-roll-up-states*))))
						       									all-curr-states))
			     (preq-fails        (filter (lambda (x)
							 								(equal? x "PREQ_FAIL"))
						       							all-curr-statuses))
           (num-non-completes (length non-completes))
 					 (newstate          (cond
															((> running 0)           "RUNNING")            ;; anything running, call the situation running
                              ((> (length preq-fails) 0) "NOT_STARTED")
															((> bad-not-started 0)   "COMPLETED")          ;; we have an ugly situation, it is completed in the sense we cannot do more.
															((> num-non-completes 0) (car non-completes))  ;;  (remove (lambda (x)(equal? "COMPLETED" x)) all-curr-states))) ;; only rollup DELETED if all DELETED
															(else                    (car all-curr-states))))
           (newstatus         (cond
                              ((> (length preq-fails) 0)  "PREQ_FAIL")
                              ((or (> bad-not-started 0)
                                   (and (equal? newstate "NOT_STARTED")
                                      (> num-non-completes 0)))
                                            "STARTED")
                              (else (car all-curr-statuses)))))
 					(debug:print-info 2 *default-log-port*
                                         "\n--> probe db:set-state-status-and-roll-up-items: "
                                         "\n--> state-status-counts: "(map dbr:counts->alist state-status-counts)
                                         "\n--> running:             "running
                                         "\n--> bad-not-started:     "bad-not-started
                                         "\n--> non-non-completes:   "num-non-completes
                                         "\n--> non-completes:       "non-completes
                                         "\n--> all-curr-states:     "all-curr-states
                                         "\n--> all-curr-statuses:     "all-curr-statuses
                                         "\n--> newstate              "newstate
                                         "\n--> newstatus            "newstatus
                                         "\n\n")

                        ;; NB// Pass the db so it is part of the transaction
         (list newstate newstatus)))

(define (db:set-state-status-and-roll-up-run dbstruct run-id curr-state curr-status)
    (mutex-lock! *db-transaction-mutex*)
    (db:with-db
     dbstruct #f #f
     (lambda (db)
       (let ((tr-res
              (sqlite3:with-transaction
               db
               (lambda ()
                   (let* ((state-status-counts  (db:get-all-state-status-counts-for-run dbstruct run-id))
													(state-stauses (db:roll-up-rules state-status-counts #f #f ))
                          (newstate (car state-stauses))
                          (newstatus (cadr state-stauses))) 
                    (if (or (not (eq? newstate curr-state)) (not (eq?  newstatus curr-status)))
                   (db:set-run-state-status dbstruct run-id newstate newstatus )))))))
         (mutex-unlock! *db-transaction-mutex*)
         tr-res))))


(define (db:get-all-state-status-counts-for-run dbstruct run-id)
 (let* ((test-count-recs (db:with-db
                                  dbstruct #f #f
                                  (lambda (db)
                                    (sqlite3:map-row
                                     (lambda (state status count)
                                        (make-dbr:counts state: state status: status count: count))
                                     db
                                     "SELECT state,status,count(id) FROM tests WHERE run_id=?  GROUP BY state,status;"
                                     run-id )))))
   test-count-recs))


;; BBnote: db:get-all-state-status-counts-for-test returns dbr:counts object aggregating state and status of items of a given test, *not including rollup state/status*
;;
;; NOTE: This is called within a transaction
;;
(define (db:get-all-state-status-counts-for-test dbstruct run-id test-name item-path item-state-in item-status-in)
  (let* ((test-info   (db:get-test-info dbstruct run-id test-name item-path))

         (nonmatch-countrec-lambda (lambda (countrec) (not (match-countrec-lambda countrec))))
         
         (unrelated-rec-list   
          (filter nonmatch-countrec-lambda other-items-count-recs)))
    
    (cons updated-count-rec unrelated-rec-list)))

;; (define (db:get-all-item-states db run-id test-name)
;;   (sqlite3:map-row 
;;    (lambda (a) a)
;;    db
;;    "SELECT DISTINCT state FROM tests WHERE item_path != '' AND state != 'DELETED' AND run_id=? AND testname=?"
;;    run-id test-name))
;; 
;; (define (db:get-all-item-statuses db run-id test-name)
;;   (sqlite3:map-row 
;;    (lambda (a) a)
;;    db
;;    "SELECT DISTINCT status FROM tests WHERE item_path != '' AND state != 'DELETED' AND state='COMPLETED' AND run_id=? AND testname=?"
;;    run-id test-name))

(define (db:test-get-logfile-info dbstruct run-id test-name)
  (db:with-db
   dbstruct
   run-id
   #f
   (lambda (db)
     (let ((res #f))