39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
|
;; Not currently used! But, I think it *should* be used!!!
(define (client:logout serverdat)
(let ((ok (and (socket? serverdat)
(cdb:logout serverdat *toppath* (client:get-signature)))))
ok))
;; Do all the connection work, look up the transport type and set up the
;; connection if required.
;;
;; There are two scenarios.
;; 1. We are a test manager and we received *transport-type* and *runremote* via cmdline
;; 2. We are a run tests, list runs or other interactive process and we must figure out
;; *transport-type* and *runremote* from the monitor.db
;;
;; client:setup
;;
;; lookup_server, need to remove *runremote* stuff
;;
(define (client:setup run-id #!key (remaining-tries 10) (failed-connects 0))
(debug:print 0 "INFO: client:setup remaining-tries=" remaining-tries)
(if (<= remaining-tries 0)
(begin
(debug:print 0 "ERROR: failed to start or connect to server for run-id " run-id)
(exit 1))
(let ((host-info (hash-table-ref/default *runremote* run-id #f)))
(debug:print-info 0 "client:setup host-info=" host-info ", remaining-tries=" remaining-tries)
(if host-info
(let* ((iface (car host-info))
(port (cadr host-info))
(start-res (http-transport:client-connect iface port))
;; (ping-res (server:ping-server run-id iface port))
(ping-res (rmt:login-no-auto-client-setup start-res run-id)))
(if ping-res ;; sucessful login?
(begin
(hash-table-set! *runremote* run-id start-res)
start-res) ;; return the server info
(if (member remaining-tries '(3 4 6))
(begin ;; login failed
(debug:print 25 "INFO: client:setup start-res=" start-res ", run-id=" run-id ", server-dat=" host-info)
|
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
|
|
|
|
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
|
;; Not currently used! But, I think it *should* be used!!!
(define (client:logout serverdat)
(let ((ok (and (socket? serverdat)
(cdb:logout serverdat *toppath* (client:get-signature)))))
ok))
(define (client:connect iface port)
(case (server:get-transport)
((rpc) (rpc:client-connect iface port))
((http) (http:client-connect iface port))
((zmq) (zmq:client-connect iface port))
(else (rpc:client-connect iface port))))
(define (client:login-no-auto-setup server-info run-id)
(case (server:get-transport)
((rpc) (rpc:login-no-auto-client-setup server-info run-id))
((http) (rmt:login-no-auto-client-setup server-info run-id))
(else (rpc:login-no-auto-client-setup server-info run-id))))
(define (client:setup run-id #!key (remaining-tries 10) (failed-connects 0))
(case (server:get-transport)
((rpc) (client:setup-rpc run-id))
((http)(client:setup-http run-id))
(else (client:setup-rpc run-id))))
(define (client:setup-rpc run-id)
(debug:print 0 "INFO: client:setup remaining-tries=" remaining-tries)
(if (<= remaining-tries 0)
(begin
(debug:print 0 "ERROR: failed to start or connect to server for run-id " run-id)
(exit 1))
(let ((host-info (hash-table-ref/default *runremote* run-id #f)))
(debug:print-info 0 "client:setup host-info=" host-info ", remaining-tries=" remaining-tries)
(if host-info
(let* ((iface (car host-info))
(port (cadr host-info))
(start-res (client:connect iface port))
;; (ping-res (server:ping-server run-id iface port))
(ping-res (client:login-no-auto-setup start-res run-id)))
(if ping-res ;; sucessful login?
(begin
(hash-table-set! *runremote* run-id start-res)
start-res) ;; return the server info
(if (member remaining-tries '(3 4 6))
(begin ;; login failed
(debug:print 25 "INFO: client:setup start-res=" start-res ", run-id=" run-id ", server-dat=" host-info)
(hash-table-delete! *runremote* run-id)
(open-run-close tasks:server-force-clean-run-record
tasks:open-db
run-id
(car host-info)
(cadr host-info)
" client:setup (host-info=#t)")
(thread-sleep! 5)
(client:setup run-id remaining-tries: 10)) ;; (- remaining-tries 1)))
(begin
(debug:print 25 "INFO: client:setup failed to connect, start-res=" start-res ", run-id=" run-id ", host-info=" host-info)
(thread-sleep! 5)
(client:setup run-id remaining-tries: (- remaining-tries 1))))))
;; YUK: rename server-dat here
(let* ((server-dat (open-run-close tasks:get-server tasks:open-db run-id)))
(debug:print-info 0 "client:setup server-dat=" server-dat ", remaining-tries=" remaining-tries)
(if server-dat
(let* ((iface (tasks:hostinfo-get-interface server-dat))
(port (tasks:hostinfo-get-port server-dat))
(start-res (http-transport:client-connect iface port))
;; (ping-res (server:ping-server run-id iface port))
(ping-res (rmt:login-no-auto-client-setup start-res run-id)))
(if start-res
(begin
(hash-table-set! *runremote* run-id start-res)
start-res)
(if (member remaining-tries '(2 5))
(begin ;; login failed
(debug:print 25 "INFO: client:setup start-res=" start-res ", run-id=" run-id ", server-dat=" server-dat)
(hash-table-delete! *runremote* run-id)
(open-run-close tasks:server-force-clean-run-record
tasks:open-db
run-id
(tasks:hostinfo-get-interface server-dat)
(tasks:hostinfo-get-port server-dat)
" client:setup (server-dat = #t)")
(thread-sleep! 2)
(server:try-running run-id)
(thread-sleep! 10) ;; give server a little time to start up
(client:setup run-id remaining-tries: 10)) ;; (- remaining-tries 1)))
(begin
(debug:print 25 "INFO: client:setup start-res=" start-res ", run-id=" run-id ", server-dat=" server-dat)
(thread-sleep! 5)
(client:setup run-id remaining-tries: (- remaining-tries 1))))))
(begin ;; no server registered
(if (eq? remaining-tries 2)
(begin
;; (open-run-close tasks:server-clean-out-old-records-for-run-id tasks:open-db run-id " client:setup (server-dat=#f)")
(client:setup run-id remaining-tries: 10))
(begin
(thread-sleep! 2)
(debug:print 25 "INFO: client:setup start-res (not defined here), run-id=" run-id ", server-dat=" server-dat)
(if (< (open-run-close tasks:num-in-available-state tasks:open-db run-id) 3)
(begin
;; (open-run-close tasks:server-clean-out-old-records-for-run-id tasks:open-db run-id " client:setup (server-dat=#f)")
(server:try-running run-id)))
(thread-sleep! 10) ;; give server a little time to start up
(client:setup run-id remaining-tries: (- remaining-tries 1)))))))))))
;; Do all the connection work, look up the transport type and set up the
;; connection if required.
;;
;; There are two scenarios.
;; 1. We are a test manager and we received *transport-type* and *runremote* via cmdline
;; 2. We are a run tests, list runs or other interactive process and we must figure out
;; *transport-type* and *runremote* from the monitor.db
;;
;; client:setup
;;
;; lookup_server, need to remove *runremote* stuff
;;
(define (client:setup-http run-id #!key (remaining-tries 10) (failed-connects 0))
(debug:print 0 "INFO: client:setup remaining-tries=" remaining-tries)
(if (<= remaining-tries 0)
(begin
(debug:print 0 "ERROR: failed to start or connect to server for run-id " run-id)
(exit 1))
(let ((host-info (hash-table-ref/default *runremote* run-id #f)))
(debug:print-info 0 "client:setup host-info=" host-info ", remaining-tries=" remaining-tries)
(if host-info
(let* ((iface (car host-info))
(port (cadr host-info))
(start-res (client:connect iface port))
;; (ping-res (server:ping-server run-id iface port))
(ping-res (client:login-no-auto-setup start-res run-id)))
(if ping-res ;; sucessful login?
(begin
(hash-table-set! *runremote* run-id start-res)
start-res) ;; return the server info
(if (member remaining-tries '(3 4 6))
(begin ;; login failed
(debug:print 25 "INFO: client:setup start-res=" start-res ", run-id=" run-id ", server-dat=" host-info)
|