Megatest

;; (include "common.scm")
;; (include "megatest-version.scm")

;; fake out readline usage of toplevel-command
(define (toplevel-command . a) #f)

(use (prefix sqlite3 sqlite3:) srfi-1 posix regex regex-case srfi-69 (prefix base64 base64:)
     readline apropos json http-client directory-utils typed-records
     http-client srfi-18 extras format)

;; Added for csv stuff - will be removed
;;
(use sparse-vectors)




(require-library mutils)

;; (use zmq)

(declare (uses common))
(declare (uses megatest-version))
(declare (uses margs))

  -test-paths             : get the test paths matching target, runname, item and test
                            patterns.
  -list-disks             : list the disks available for storing runs
  -list-targets           : list the targets in runconfigs.config
  -list-db-targets        : list the target combinations used in the db
  -show-config            : dump the internal representation of the megatest.config file
  -show-runconfig         : dump the internal representation of the runconfigs.config file
  -dumpmode MODE          : dump in MODE format instead of sexpr, MODE=json,ini,sexp etc. (add -debug 0,9 to see which file contributes each line)
  -show-cmdinfo           : dump the command info for a test (run in test environment)
  -section sectionName
  -var varName            : for config and runconfig lookup value for sectionName varName
  -since N                : get list of runs changed since time N (Unix seconds)
  -fields fieldspec       : fields to include in json dump; runs:id,runame+tests:testname+steps
  -sort fieldname         : in -list-runs sort tests by this field

         "-server"
         "-list-disks"
         "-list-targets"
         "-show-runconfig"
         ;;"-list-db-targets"
         "-show-runconfig"
         "-show-config"
         "-show-cmdinfo"
	 "-cleanup-db"))
       (no-watchdog-args-vals (filter (lambda (x) x)
                                      (map args:get-arg no-watchdog-args)))
       (start-watchdog (null? no-watchdog-args-vals)))
  ;;(BB> "no-watchdog-args="no-watchdog-args "no-watchdog-args-vals="no-watchdog-args-vals) 
  (if start-watchdog
      (thread-start! *watchdog*)))


;; bracket open-output-file with code to make leading directory if it does not exist and handle exceptions
(define (open-logfile logpath)
  (condition-case
   (let* ((log-dir (or (pathname-directory logpath) ".")))
     (if (not (directory-exists? log-dir))
         (system (conc "mkdir -p " log-dir)))
     (open-output-file logpath))
   (exn ()
        (debug:print-error 0 *default-log-port* "Could not open log file for write: "logpath)
        (define *didsomething* #t)  
        (exit 1))))

;; this segment will run launch:setup only if -log is not set. This is fairly safe as servers are not
;; manually started and thus should never be started in a non-megatest area. Thus no need to handle situation
;; where (launch:setup) returns #f?
;;
(if (or (args:get-arg "-log")(args:get-arg "-server")) ;; redirect the log always when a server
    (handle-exceptions
	exn
	(begin
	  (print "ERROR: Failed to switch to log output. " ((condition-property-accessor 'exn 'message) exn))
	  )
      (let* ((tl   (or (args:get-arg "-log")(launch:setup)))   ;; run launch:setup if -server, ensure we do NOT run launch:setup if -log specified
	     (logf (or (args:get-arg "-log") ;; use -log unless we are a server, then craft a logfile name
		       (conc tl "/logs/server-" (current-process-id) "-" (get-host-name) ".log")))
	     (oup  (open-logfile logf)))
	(if (not (args:get-arg "-log"))
	    (hash-table-set! args:arg-hash "-log" logf)) ;; fake out future queries of -log
	(debug:print-info 0 *default-log-port* "Sending log output to " logf)
	(set! *default-log-port* oup))))

		       (process:children #f))
		      (original-exit exit-code)))))

;; for some switches always print the command to stderr
;;
(if (args:any? "-run" "-runall" "-remove-runs" "-set-state-status")
    (debug:print 0 *default-log-port* (string-intersperse (argv) " ")))

;; some switches imply homehost. Exit here if not on homehost
;;
(let ((homehost-required  (list "-cleanup-db" "-server")))
  (if (apply args:any? homehost-required)
      (if (not (common:on-homehost?))
	  (for-each
	   (lambda (switch)
	     (if (args:get-arg switch)
		 (begin
		   (debug:print 0 *default-log-port* "ERROR: you must be on the homehost to run with " switch
				", you can move homehost by removing the .homehost file but this will disrupt any runs in progress.")
		   (exit 1))))
	   homehost-required))))

;;======================================================================
;; Misc setup stuff
;;======================================================================

(debug:setup)

	  (if (and rundir ;; have all needed variabless
		   (directory-exists? rundir)
		   (file-write-access? rundir))
	      (begin
                (if (not (common:in-running-test?))
                    (configf:write-alist data cfgf))
		;; force re-read of megatest.config - this resolves circular references between megatest.config
		(launch:setup force-reread: #t)
		(launch:cache-config))) ;; we can safely cache megatest.config since we have a valid runconfig
	  data))))

(if (args:get-arg "-show-runconfig")
    (let ((tl (launch:setup)))
      (push-directory *toppath*)
      (let ((data (full-runconfigs-read)))

;; run all tests are are Not COMPLETED and PASS or CHECK
(if (or (args:get-arg "-runall")
	(args:get-arg "-run")
	(args:get-arg "-rerun-clean")
	(args:get-arg "-rerun-all")
	(args:get-arg "-runtests"))
    (let ((need-clean (or (args:get-arg "-rerun-clean")
                          (args:get-arg "-rerun-all"))))
      (general-run-call 
       "-runall"
       "run all tests"
       (lambda (target runname keys keyvals)
         (if (args:get-arg "-rerun-clean") ;; first set states/statuses correct
             (let ((states   (or (configf:lookup *configdat* "validvalues" "cleanrerun-states")
                                 "KILLREQ,KILLED,UNKNOWN,INCOMPLETE,STUCK,NOT_STARTED"))
                   (statuses (or (configf:lookup *configdat* "validvalues" "cleanrerun-statuses")
                                 "FAIL,INCOMPLETE,ABORT,CHECK")))
               (hash-table-set! args:arg-hash "-preclean" #t)
               (runs:operate-on 'set-state-status
                                target
                                (common:args-get-runname)  ;; (or (args:get-arg "-runname")(args:get-arg ":runname"))
                                "%" ;; (common:args-get-testpatt #f) ;; (args:get-arg "-testpatt")
                                state:  states
                                ;; status: statuses
                                new-state-status: "NOT_STARTED,n/a")
               (runs:clean-cache target runname *toppath*)
               (runs:operate-on 'set-state-status
                                target
                                (common:args-get-runname)  ;; (or (args:get-arg "-runname")(args:get-arg ":runname"))
                                "%" ;; (common:args-get-testpatt #f) ;; (args:get-arg "-testpatt")
                                ;; state:  states
                                status: statuses
                                new-state-status: "NOT_STARTED,n/a")))
         ;; RERUN ALL
         (if (args:get-arg "-rerun-all") ;; first set states/statuses correct
             (begin
               (hash-table-set! args:arg-hash "-preclean" #t)
               (runs:operate-on 'set-state-status
                                target
                                (common:args-get-runname)  ;; (or (args:get-arg "-runname")(args:get-arg ":runname"))
                                "%" ;; (common:args-get-testpatt #f) ;; (args:get-arg "-testpatt")
                                state:  #f
                                ;; status: statuses
                                new-state-status: "NOT_STARTED,n/a")
               (runs:clean-cache target runname *toppath*)
               (runs:operate-on 'set-state-status
                                target
                                (common:args-get-runname)  ;; (or (args:get-arg "-runname")(args:get-arg ":runname"))
                                "%" ;; (common:args-get-testpatt #f) ;; (args:get-arg "-testpatt")
                                ;; state:  states
                                status: #f
                                new-state-status: "NOT_STARTED,n/a")))
         (runs:run-tests target
                         runname
                         #f ;; (common:args-get-testpatt #f)
                         ;; (or (args:get-arg "-testpatt")
                         ;;     "%")
                         user
                         args:arg-hash)))))

;;======================================================================
;; run one test
;;======================================================================

;; 1. find the config file
;; 2. change to the test directory

(if (args:get-arg "-cleanup-db")
    (begin
      (if (not (launch:setup))
	  (begin
	    (debug:print 0 *default-log-port* "Failed to setup, exiting") 
	    (exit 1)))
      (let ((dbstruct (db:setup #f areapath: *toppath*)))
        (common:cleanup-db dbstruct))
      (set! *didsomething* #t)))

(if (args:get-arg "-mark-incompletes")
    (begin
      (if (not (launch:setup))
	  (begin

(if (or (getenv "MT_RUNSCRIPT")
	(args:get-arg "-repl")
	(args:get-arg "-load"))
    (let* ((toppath (launch:setup))
	   (dbstruct (if (and toppath
                              (common:on-homehost?))
                         (db:setup #t)
                         #f))) ;; make-dbr:dbstruct path: toppath local: (args:get-arg "-local")) #f)))
      (if *toppath*
	  (cond
	   ((getenv "MT_RUNSCRIPT")
	    ;; How to run megatest scripts
	    ;;
	    ;; #!/bin/bash

;; ;; ;; redo me        (db:close-all dbstruct)
;; ;; ;; redo me        (list "uname" "rundir" "final_logf" "comment"))
;; ;; ;; redo me       (set! *didsomething* #t)))

(if (args:get-arg "-import-megatest.db")
    (begin
      (db:multi-db-sync 
       (db:setup #f)
       'killservers
       'dejunk
       'adj-testids
       'old2new
       ;; 'new2old
       )
      (set! *didsomething* #t)))

(if (args:get-arg "-sync-to-megatest.db")
    (begin
      (db:multi-db-sync 
       (db:setup #f)
       'new2old
       )
      (set! *didsomething* #t)))

(if (args:get-arg "-sync-to")
    (let ((toppath (launch:setup)))
      (tasks:sync-to-postgres *configdat* (args:get-arg "-sync-to"))