| ︙ | | | ︙ | |
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
|
(defstruct launch:einf (pid #t)(exit-status #t)(exit-code #t)(rollup-status 0))
;; return (conc status ": " comment) from the final section so that
;; the comment can be set in the step record in launch.scm
;;
(define (launch:load-logpro-dat run-id test-id stepname)
(let ((cname (conc stepname ".dat")))
(if (file-exists? cname)
(let* ((dat (read-config cname #f #f))
(csvr (db:logpro-dat->csv dat stepname))
(csvt (let-values (((fmt-cell fmt-record fmt-csv) (make-format ",")))
(fmt-csv (map list->csv-record csvr))))
(status (configf:lookup dat "final" "exit-status"))
(msg (configf:lookup dat "final" "message")))
(if csvt ;; this if blocked stack dump caused by .dat file from logpro being 0-byte. fixed by upgrading logpro
|
|
|
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
|
(defstruct launch:einf (pid #t)(exit-status #t)(exit-code #t)(rollup-status 0))
;; return (conc status ": " comment) from the final section so that
;; the comment can be set in the step record in launch.scm
;;
(define (launch:load-logpro-dat run-id test-id stepname)
(let ((cname (conc stepname ".dat")))
(if (common:file-exists? cname)
(let* ((dat (read-config cname #f #f))
(csvr (db:logpro-dat->csv dat stepname))
(csvt (let-values (((fmt-cell fmt-record fmt-csv) (make-format ",")))
(fmt-csv (map list->csv-record csvr))))
(status (configf:lookup dat "final" "exit-status"))
(msg (configf:lookup dat "final" "message")))
(if csvt ;; this if blocked stack dump caused by .dat file from logpro being 0-byte. fixed by upgrading logpro
|
| ︙ | | | ︙ | |
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
|
(stepparms (list-ref stepparts 2)) ;; for future use, {VAR=1,2,3}, run step for each
(stepcmd (list-ref stepparts 3))
(script "") ; "#!/bin/bash\n") ;; yep, we depend on bin/bash FIXME!!!\
(logpro-file (conc stepname ".logpro"))
(html-file (conc stepname ".html"))
(dat-file (conc stepname ".dat"))
(tconfig-logpro (configf:lookup testconfig "logpro" stepname))
(logpro-used (file-exists? logpro-file)))
(if (and tconfig-logpro
(not logpro-used)) ;; no logpro file found but have a defn in the testconfig
(begin
(with-output-to-file logpro-file
(lambda ()
(print ";; logpro file extracted from testconfig\n"
";;")
(print tconfig-logpro)))
(set! logpro-used #t)))
;; NB// can safely assume we are in test-area directory
(debug:print 4 *default-log-port* "ezsteps:\n stepname: " stepname " stepinfo: " stepinfo " stepparts: " stepparts
" stepparms: " stepparms " stepcmd: " stepcmd)
;; ;; first source the previous environment
;; (let ((prev-env (conc ".ezsteps/" prevstep (if (string-search (regexp "csh")
;; (get-environment-variable "SHELL")) ".csh" ".sh"))))
;; (if (and prevstep (file-exists? prev-env))
;; (set! script (conc script "source " prev-env))))
;; call the command using mt_ezstep
;; (set! script (conc "mt_ezstep " stepname " " (if prevstep prevstep "x") " " stepcmd))
(debug:print 4 *default-log-port* "script: " script)
(rmt:teststep-set-status! run-id test-id stepname "start" "-" #f #f)
;; now launch the actual process
(call-with-environment-variables
(list (cons "PATH" (conc (get-environment-variable "PATH") ":.")))
(lambda () ;; (process-run "/bin/bash" "-c" "exec ls -l /tmp/foobar > /tmp/delme-more.log 2>&1")
(let* ((cmd (conc stepcmd " > " stepname ".log 2>&1")) ;; >outfile 2>&1
(pid (process-run "/bin/bash" (list "-c" cmd))))
(with-output-to-file "Makefile.ezsteps"
(lambda ()
(print stepname ".log :")
(print "\t" cmd)
(if (file-exists? (conc stepname ".logpro"))
(print "\tlogpro " stepname ".logpro " stepname ".html < " stepname ".log"))
(print)
(print stepname " : " stepname ".log")
(print))
#:append)
(rmt:test-set-top-process-pid run-id test-id pid)
|
|
|
|
|
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
|
(stepparms (list-ref stepparts 2)) ;; for future use, {VAR=1,2,3}, run step for each
(stepcmd (list-ref stepparts 3))
(script "") ; "#!/bin/bash\n") ;; yep, we depend on bin/bash FIXME!!!\
(logpro-file (conc stepname ".logpro"))
(html-file (conc stepname ".html"))
(dat-file (conc stepname ".dat"))
(tconfig-logpro (configf:lookup testconfig "logpro" stepname))
(logpro-used (common:file-exists? logpro-file)))
(if (and tconfig-logpro
(not logpro-used)) ;; no logpro file found but have a defn in the testconfig
(begin
(with-output-to-file logpro-file
(lambda ()
(print ";; logpro file extracted from testconfig\n"
";;")
(print tconfig-logpro)))
(set! logpro-used #t)))
;; NB// can safely assume we are in test-area directory
(debug:print 4 *default-log-port* "ezsteps:\n stepname: " stepname " stepinfo: " stepinfo " stepparts: " stepparts
" stepparms: " stepparms " stepcmd: " stepcmd)
;; ;; first source the previous environment
;; (let ((prev-env (conc ".ezsteps/" prevstep (if (string-search (regexp "csh")
;; (get-environment-variable "SHELL")) ".csh" ".sh"))))
;; (if (and prevstep (common:file-exists? prev-env))
;; (set! script (conc script "source " prev-env))))
;; call the command using mt_ezstep
;; (set! script (conc "mt_ezstep " stepname " " (if prevstep prevstep "x") " " stepcmd))
(debug:print 4 *default-log-port* "script: " script)
(rmt:teststep-set-status! run-id test-id stepname "start" "-" #f #f)
;; now launch the actual process
(call-with-environment-variables
(list (cons "PATH" (conc (get-environment-variable "PATH") ":.")))
(lambda () ;; (process-run "/bin/bash" "-c" "exec ls -l /tmp/foobar > /tmp/delme-more.log 2>&1")
(let* ((cmd (conc stepcmd " > " stepname ".log 2>&1")) ;; >outfile 2>&1
(pid (process-run "/bin/bash" (list "-c" cmd))))
(with-output-to-file "Makefile.ezsteps"
(lambda ()
(print stepname ".log :")
(print "\t" cmd)
(if (common:file-exists? (conc stepname ".logpro"))
(print "\tlogpro " stepname ".logpro " stepname ".html < " stepname ".log"))
(print)
(print stepname " : " stepname ".log")
(print))
#:append)
(rmt:test-set-top-process-pid run-id test-id pid)
|
| ︙ | | | ︙ | |
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
|
(let ((exinfo (launch:einf-exit-code exit-info)) ;; (vector-ref exit-info 2))
(logfna (if logpro-used (conc stepname ".html") ""))
(comment #f))
(if logpro-used
(let ((datfile (conc stepname ".dat")))
;; load the .dat file into the test_data table if it exists
(if (file-exists? datfile)
(set! comment (launch:load-logpro-dat run-id test-id stepname)))
(rmt:test-set-log! run-id test-id (conc stepname ".html"))))
(rmt:teststep-set-status! run-id test-id stepname "end" exinfo comment logfna))
;; set the test final status
(let* ((process-exit-status (launch:einf-exit-code exit-info)) ;; (vector-ref exit-info 2))
(this-step-status (cond
((and (eq? process-exit-status 2) logpro-used) 'warn) ;; logpro 2 = warnings
|
|
|
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
|
(let ((exinfo (launch:einf-exit-code exit-info)) ;; (vector-ref exit-info 2))
(logfna (if logpro-used (conc stepname ".html") ""))
(comment #f))
(if logpro-used
(let ((datfile (conc stepname ".dat")))
;; load the .dat file into the test_data table if it exists
(if (common:file-exists? datfile)
(set! comment (launch:load-logpro-dat run-id test-id stepname)))
(rmt:test-set-log! run-id test-id (conc stepname ".html"))))
(rmt:teststep-set-status! run-id test-id stepname "end" exinfo comment logfna))
;; set the test final status
(let* ((process-exit-status (launch:einf-exit-code exit-info)) ;; (vector-ref exit-info 2))
(this-step-status (cond
((and (eq? process-exit-status 2) logpro-used) 'warn) ;; logpro 2 = warnings
|
| ︙ | | | ︙ | |
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
|
(debug:print 0 *default-log-port* "WARNING: no testconfig found for " test-name " in search path:\n "
(string-intersperse (tests:get-tests-search-path *configdat*) "\n "))))
;; after all that, still no testconfig? Time to abort
(if (not testconfig)
(begin
(debug:print-error 0 *default-log-port* "Failed to resolve megatest.config, runconfigs.config and testconfig issues. Giving up now")
(exit 1)))
(if (not (file-exists? ".ezsteps"))(create-directory ".ezsteps"))
;; if ezsteps was defined then we are sure to have at least one step but check anyway
(if (not (> (length ezstepslst) 0))
(debug:print-error 0 *default-log-port* "ezsteps defined but ezstepslst is zero length")
(let loop ((ezstep (car ezstepslst))
(tal (cdr ezstepslst))
(prevstep #f))
;; check exit-info (vector-ref exit-info 1)
(if (launch:einf-exit-status exit-info) ;; (vector-ref exit-info 1)
(let ((logpro-used (launch:runstep ezstep run-id test-id exit-info m tal testconfig))
(stepname (car ezstep)))
;; if logpro-used read in the stepname.dat file
(if (and logpro-used (file-exists? (conc stepname ".dat")))
(launch:load-logpro-dat run-id test-id stepname))
(if (steprun-good? logpro-used (launch:einf-exit-code exit-info))
(if (not (null? tal))
(loop (car tal) (cdr tal) stepname))
(debug:print 4 *default-log-port* "WARNING: step " (car ezstep) " failed. Stopping")))
(debug:print 4 *default-log-port* "WARNING: a prior step failed, stopping at " ezstep)))))))
|
|
|
|
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
|
(debug:print 0 *default-log-port* "WARNING: no testconfig found for " test-name " in search path:\n "
(string-intersperse (tests:get-tests-search-path *configdat*) "\n "))))
;; after all that, still no testconfig? Time to abort
(if (not testconfig)
(begin
(debug:print-error 0 *default-log-port* "Failed to resolve megatest.config, runconfigs.config and testconfig issues. Giving up now")
(exit 1)))
(if (not (common:file-exists? ".ezsteps"))(create-directory ".ezsteps"))
;; if ezsteps was defined then we are sure to have at least one step but check anyway
(if (not (> (length ezstepslst) 0))
(debug:print-error 0 *default-log-port* "ezsteps defined but ezstepslst is zero length")
(let loop ((ezstep (car ezstepslst))
(tal (cdr ezstepslst))
(prevstep #f))
;; check exit-info (vector-ref exit-info 1)
(if (launch:einf-exit-status exit-info) ;; (vector-ref exit-info 1)
(let ((logpro-used (launch:runstep ezstep run-id test-id exit-info m tal testconfig))
(stepname (car ezstep)))
;; if logpro-used read in the stepname.dat file
(if (and logpro-used (common:file-exists? (conc stepname ".dat")))
(launch:load-logpro-dat run-id test-id stepname))
(if (steprun-good? logpro-used (launch:einf-exit-code exit-info))
(if (not (null? tal))
(loop (car tal) (cdr tal) stepname))
(debug:print 4 *default-log-port* "WARNING: step " (car ezstep) " failed. Stopping")))
(debug:print 4 *default-log-port* "WARNING: a prior step failed, stopping at " ezstep)))))))
|
| ︙ | | | ︙ | |
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
|
(keys #f)
(keyvals #f)
(fullrunscript (if (not runscript)
#f
(if (substring-index "/" runscript)
runscript ;; use unadultered if contains slashes
(let ((fulln (conc testpath "/" runscript)))
(if (and (file-exists? fulln)
(file-execute-access? fulln))
fulln
runscript))))) ;; assume it is on the path
) ;; (rollup-status 0)
(if contour (setenv "MT_CONTOUR" contour))
|
|
|
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
|
(keys #f)
(keyvals #f)
(fullrunscript (if (not runscript)
#f
(if (substring-index "/" runscript)
runscript ;; use unadultered if contains slashes
(let ((fulln (conc testpath "/" runscript)))
(if (and (common:file-exists? fulln)
(file-execute-access? fulln))
fulln
runscript))))) ;; assume it is on the path
) ;; (rollup-status 0)
(if contour (setenv "MT_CONTOUR" contour))
|
| ︙ | | | ︙ | |
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
|
(handle-exceptions
exn
(debug:print 0 *default-log-port* "Failed to create directory " logdir " expect problems, message: " ((condition-property-accessor 'exn 'message) exn))
(create-directory logdir #t)))))
;; NFS might not have propagated the directory meta data to the run host - give it time if needed
(let loop ((count 0))
(if (or (file-exists? top-path)
(> count 10))
(change-directory top-path)
(begin
(debug:print 0 *default-log-port* "INFO: Not starting job yet - directory " top-path " not found")
(thread-sleep! 10)
(loop (+ count 1)))))
(launch:setup) ;; should be properly in the top-path now
|
|
|
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
|
(handle-exceptions
exn
(debug:print 0 *default-log-port* "Failed to create directory " logdir " expect problems, message: " ((condition-property-accessor 'exn 'message) exn))
(create-directory logdir #t)))))
;; NFS might not have propagated the directory meta data to the run host - give it time if needed
(let loop ((count 0))
(if (or (common:file-exists? top-path)
(> count 10))
(change-directory top-path)
(begin
(debug:print 0 *default-log-port* "INFO: Not starting job yet - directory " top-path " not found")
(thread-sleep! 10)
(loop (+ count 1)))))
(launch:setup) ;; should be properly in the top-path now
|
| ︙ | | | ︙ | |
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
|
(debug:print-error 0 *default-log-port* "bad variable spec, " var "=" val))))
(configf:get-section rconfig section)))
(list "default" target)))
;;(bb-check-path msg: "launch:execute post block 1")
;; NFS might not have propagated the directory meta data to the run host - give it time if needed
(let loop ((count 0))
(if (or (file-exists? work-area)
(> count 10))
(change-directory work-area)
(begin
(debug:print 0 *default-log-port* "INFO: Not starting job yet - directory " work-area " not found")
(thread-sleep! 10)
(loop (+ count 1)))))
;;(bb-check-path msg: "launch:execute post block 1.5")
|
|
|
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
|
(debug:print-error 0 *default-log-port* "bad variable spec, " var "=" val))))
(configf:get-section rconfig section)))
(list "default" target)))
;;(bb-check-path msg: "launch:execute post block 1")
;; NFS might not have propagated the directory meta data to the run host - give it time if needed
(let loop ((count 0))
(if (or (common:file-exists? work-area)
(> count 10))
(change-directory work-area)
(begin
(debug:print 0 *default-log-port* "INFO: Not starting job yet - directory " work-area " not found")
(thread-sleep! 10)
(loop (+ count 1)))))
;;(bb-check-path msg: "launch:execute post block 1.5")
|
| ︙ | | | ︙ | |
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
|
(tests:set-full-meta-info #f test-id run-id 0 work-area 10)
;; (thread-sleep! 0.3) ;; NFS slowness has caused grief here
(if (args:get-arg "-xterm")
(set! fullrunscript "xterm")
(if (and fullrunscript
(file-exists? fullrunscript)
(not (file-execute-access? fullrunscript)))
(system (conc "chmod ug+x " fullrunscript))))
;; We are about to actually kick off the test
;; so this is a good place to remove the records for
;; any previous runs
;; (db:test-remove-steps db run-id testname itemdat)
|
|
|
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
|
(tests:set-full-meta-info #f test-id run-id 0 work-area 10)
;; (thread-sleep! 0.3) ;; NFS slowness has caused grief here
(if (args:get-arg "-xterm")
(set! fullrunscript "xterm")
(if (and fullrunscript
(common:file-exists? fullrunscript)
(not (file-execute-access? fullrunscript)))
(system (conc "chmod ug+x " fullrunscript))))
;; We are about to actually kick off the test
;; so this is a good place to remove the records for
;; any previous runs
;; (db:test-remove-steps db run-id testname itemdat)
|
| ︙ | | | ︙ | |
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
|
(target (common:args-get-target exit-if-bad: #t))
(runname (or (args:get-arg "-runname")
(args:get-arg ":runname")
(getenv "MT_RUNNAME")))
(fulldir (conc linktree "/"
target "/"
runname)))
(if (and linktree (file-exists? linktree)) ;; can't proceed without linktree
(begin
(debug:print-info 0 *default-log-port* "Have -run with target=" target ", runname=" runname ", fulldir=" fulldir ", testpatt=" (or (args:get-arg "-testpatt") "%"))
(if (not (file-exists? fulldir))
(create-directory fulldir #t)) ;; need to protect with exception handler
(if (and target
runname
(file-exists? fulldir))
(let ((tmpfile (conc fulldir "/.megatest.cfg." (current-seconds)))
(targfile (conc fulldir "/.megatest.cfg-" megatest-version "-" megatest-fossil-hash))
(rconfig (conc fulldir "/.runconfig." megatest-version "-" megatest-fossil-hash)))
(if (file-exists? rconfig) ;; only cache megatest.config AFTER runconfigs has been cached
(begin
(debug:print-info 0 *default-log-port* "Caching megatest.config in " tmpfile)
(if (not (common:in-running-test?))
(configf:write-alist *configdat* tmpfile))
(system (conc "ln -sf " tmpfile " " targfile))))
)))
(debug:print-info 1 *default-log-port* "No linktree yet, no caching configs.")))))
|
|
|
|
|
|
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
|
(target (common:args-get-target exit-if-bad: #t))
(runname (or (args:get-arg "-runname")
(args:get-arg ":runname")
(getenv "MT_RUNNAME")))
(fulldir (conc linktree "/"
target "/"
runname)))
(if (and linktree (common:file-exists? linktree)) ;; can't proceed without linktree
(begin
(debug:print-info 0 *default-log-port* "Have -run with target=" target ", runname=" runname ", fulldir=" fulldir ", testpatt=" (or (args:get-arg "-testpatt") "%"))
(if (not (common:file-exists? fulldir))
(create-directory fulldir #t)) ;; need to protect with exception handler
(if (and target
runname
(common:file-exists? fulldir))
(let ((tmpfile (conc fulldir "/.megatest.cfg." (current-seconds)))
(targfile (conc fulldir "/.megatest.cfg-" megatest-version "-" megatest-fossil-hash))
(rconfig (conc fulldir "/.runconfig." megatest-version "-" megatest-fossil-hash)))
(if (common:file-exists? rconfig) ;; only cache megatest.config AFTER runconfigs has been cached
(begin
(debug:print-info 0 *default-log-port* "Caching megatest.config in " tmpfile)
(if (not (common:in-running-test?))
(configf:write-alist *configdat* tmpfile))
(system (conc "ln -sf " tmpfile " " targfile))))
)))
(debug:print-info 1 *default-log-port* "No linktree yet, no caching configs.")))))
|
| ︙ | | | ︙ | |
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
|
(create-directory linktree #t))))
(handle-exceptions
exn
(begin
(debug:print-error 0 *default-log-port* "Something went wrong when trying to create link to linktree at " *toppath*)
(debug:print 0 *default-log-port* " message: " ((condition-property-accessor 'exn 'message) exn)))
(let ((tlink (conc *toppath* "/lt")))
(if (not (file-exists? tlink))
(create-symbolic-link linktree tlink)))))
(begin
(debug:print-error 0 *default-log-port* "linktree not defined in [setup] section of megatest.config")
)))
(if (and *toppath*
(directory-exists? *toppath*))
(begin
(setenv "MT_RUN_AREA_HOME" *toppath*)
(setenv "MT_TESTSUITENAME" (common:get-testsuite-name)))
(begin
(debug:print-error 0 *default-log-port* "failed to find the top path to your Megatest area.")
(set! *toppath* #f) ;; force it to be false so we return #f
#f))
;; one more attempt to cache the configs for future reading
(let* ((cachefiles (launch:get-cache-file-paths areapath toppath target mtconfig))
(mtcachef (car cachefiles))
(rccachef (cdr cachefiles)))
(if (and rccachef *runconfigdat* (not (file-exists? rccachef))) (configf:write-alist *runconfigdat* rccachef))
(if (and mtcachef *configdat* (not (file-exists? mtcachef))) (configf:write-alist *configdat* mtcachef))
(if (and rccachef mtcachef *runconfigdat* *configdat*)
(set! *configstatus* 'fulldata)))
;; if have -append-config then read and append here
(let ((cfname (args:get-arg "-append-config")))
(if (and cfname
(file-read-access? cfname))
|
|
|
|
|
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
|
(create-directory linktree #t))))
(handle-exceptions
exn
(begin
(debug:print-error 0 *default-log-port* "Something went wrong when trying to create link to linktree at " *toppath*)
(debug:print 0 *default-log-port* " message: " ((condition-property-accessor 'exn 'message) exn)))
(let ((tlink (conc *toppath* "/lt")))
(if (not (common:file-exists? tlink))
(create-symbolic-link linktree tlink)))))
(begin
(debug:print-error 0 *default-log-port* "linktree not defined in [setup] section of megatest.config")
)))
(if (and *toppath*
(directory-exists? *toppath*))
(begin
(setenv "MT_RUN_AREA_HOME" *toppath*)
(setenv "MT_TESTSUITENAME" (common:get-testsuite-name)))
(begin
(debug:print-error 0 *default-log-port* "failed to find the top path to your Megatest area.")
(set! *toppath* #f) ;; force it to be false so we return #f
#f))
;; one more attempt to cache the configs for future reading
(let* ((cachefiles (launch:get-cache-file-paths areapath toppath target mtconfig))
(mtcachef (car cachefiles))
(rccachef (cdr cachefiles)))
(if (and rccachef *runconfigdat* (not (common:file-exists? rccachef))) (configf:write-alist *runconfigdat* rccachef))
(if (and mtcachef *configdat* (not (common:file-exists? mtcachef))) (configf:write-alist *configdat* mtcachef))
(if (and rccachef mtcachef *runconfigdat* *configdat*)
(set! *configstatus* 'fulldata)))
;; if have -append-config then read and append here
(let ((cfname (args:get-arg "-append-config")))
(if (and cfname
(file-read-access? cfname))
|
| ︙ | | | ︙ | |
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
|
(handle-exceptions
exn
(begin
(debug:print-error 0 *default-log-port* " Failed to remove symlink " lnkpath ((condition-property-accessor 'exn 'message) exn) ", exiting")
(exit 1))
(delete-file lnkpath)))
(if (not (or (file-exists? lnkpath)
(symbolic-link? lnkpath)))
(handle-exceptions
exn
(begin
(debug:print-error 0 *default-log-port* " Failed to create symlink " lnkpath ((condition-property-accessor 'exn 'message) exn) ", exiting")
(exit 1))
(create-symbolic-link toptest-path lnkpath)))
|
|
|
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
|
(handle-exceptions
exn
(begin
(debug:print-error 0 *default-log-port* " Failed to remove symlink " lnkpath ((condition-property-accessor 'exn 'message) exn) ", exiting")
(exit 1))
(delete-file lnkpath)))
(if (not (or (common:file-exists? lnkpath)
(symbolic-link? lnkpath)))
(handle-exceptions
exn
(begin
(debug:print-error 0 *default-log-port* " Failed to create symlink " lnkpath ((condition-property-accessor 'exn 'message) exn) ", exiting")
(exit 1))
(create-symbolic-link toptest-path lnkpath)))
|
| ︙ | | | ︙ | |
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
|
;; (db:get-path dbstruct
;; (rmt:sdb-qry 'getstr
(db:test-get-rundir testinfo) ;; ) ;; )
#f)))
(hash-table-set! *toptest-paths* testname curr-test-path)
;; NB// Was this for the test or for the parent in an iterated test?
(rmt:general-call 'test-set-rundir-shortdir run-id lnkpath
(if (file-exists? lnkpath)
;; (resolve-pathname lnkpath)
(common:nice-path lnkpath)
lnkpath)
testname "" run-id)
;; (rmt:general-call 'test-set-rundir run-id lnkpath testname "") ;; toptest-path)
(if (or (not curr-test-path)
(not (directory-exists? toptest-path)))
|
|
|
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
|
;; (db:get-path dbstruct
;; (rmt:sdb-qry 'getstr
(db:test-get-rundir testinfo) ;; ) ;; )
#f)))
(hash-table-set! *toptest-paths* testname curr-test-path)
;; NB// Was this for the test or for the parent in an iterated test?
(rmt:general-call 'test-set-rundir-shortdir run-id lnkpath
(if (common:file-exists? lnkpath)
;; (resolve-pathname lnkpath)
(common:nice-path lnkpath)
lnkpath)
testname "" run-id)
;; (rmt:general-call 'test-set-rundir run-id lnkpath testname "") ;; toptest-path)
(if (or (not curr-test-path)
(not (directory-exists? toptest-path)))
|
| ︙ | | | ︙ | |
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
|
;; If there is already a symlink delete it and recreate it.
(handle-exceptions
exn
(begin
(debug:print-error 0 *default-log-port* " Failed to re-create link " lnktarget ((condition-property-accessor 'exn 'message) exn) ", exiting")
(exit))
(if (symbolic-link? lnktarget) (delete-file lnktarget))
(if (not (file-exists? lnktarget)) (create-symbolic-link test-path lnktarget)))))
(if (not (directory? test-path))
(create-directory test-path #t)) ;; this is a hack, I don't know why out of the blue this path does not exist sometimes
(if (and test-src-path (directory? test-path))
(begin
(let* ((ovrcmd (let ((cmd (config-lookup *configdat* "setup" "testcopycmd")))
|
|
|
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
|
;; If there is already a symlink delete it and recreate it.
(handle-exceptions
exn
(begin
(debug:print-error 0 *default-log-port* " Failed to re-create link " lnktarget ((condition-property-accessor 'exn 'message) exn) ", exiting")
(exit))
(if (symbolic-link? lnktarget) (delete-file lnktarget))
(if (not (common:file-exists? lnktarget)) (create-symbolic-link test-path lnktarget)))))
(if (not (directory? test-path))
(create-directory test-path #t)) ;; this is a hack, I don't know why out of the blue this path does not exist sometimes
(if (and test-src-path (directory? test-path))
(begin
(let* ((ovrcmd (let ((cmd (config-lookup *configdat* "setup" "testcopycmd")))
|
| ︙ | | | ︙ | |
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
|
(list 'set-vars (if params (hash-table-ref/default params "-setvars" #f)))
(list 'runname runname)
(list 'mt-bindir-path mt-bindir-path))))))))
;; clean out step records from previous run if they exist
;; (rmt:delete-test-step-records run-id test-id)
;; if the dir does not exist we may have a itempath where individual variables are a path, launch anyway
(if (file-exists? work-area)
(change-directory work-area)) ;; so that log files from the launch process don't clutter the test dir
(cond
;; ((and launcher hosts) ;; must be using ssh hostname
;; (set! fullcmd (append launcher (car hosts)(list remote-megatest "-m" test-sig "-execute" cmdparms) debug-param)))
;; (set! fullcmd (append launcher (car hosts)(list remote-megatest test-sig "-execute" cmdparms))))
(launcher
(set! fullcmd (append launcher (list remote-megatest "-m" test-sig "-execute" cmdparms) debug-param)))
|
|
|
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
|
(list 'set-vars (if params (hash-table-ref/default params "-setvars" #f)))
(list 'runname runname)
(list 'mt-bindir-path mt-bindir-path))))))))
;; clean out step records from previous run if they exist
;; (rmt:delete-test-step-records run-id test-id)
;; if the dir does not exist we may have a itempath where individual variables are a path, launch anyway
(if (common:file-exists? work-area)
(change-directory work-area)) ;; so that log files from the launch process don't clutter the test dir
(cond
;; ((and launcher hosts) ;; must be using ssh hostname
;; (set! fullcmd (append launcher (car hosts)(list remote-megatest "-m" test-sig "-execute" cmdparms) debug-param)))
;; (set! fullcmd (append launcher (car hosts)(list remote-megatest test-sig "-execute" cmdparms))))
(launcher
(set! fullcmd (append launcher (list remote-megatest "-m" test-sig "-execute" cmdparms) debug-param)))
|
| ︙ | | | ︙ | |