Megatest

               (write-access (file-write-access? mtdbpath))
	       ;(mtdbmodtime  (if mtdbexists (common:lazy-sqlite-db-modification-time mtdbpath)   #f)) ; moving this before db:open-megatest-db is called. if wal mode is on -WAL and -shm file get created with causing the  tmpdbmodtime timestamp always greater than mtdbmodtime
	       ;(tmpdbmodtime (if dbfexists  (common:lazy-sqlite-db-modification-time tmpdbfname) #f)) 
					;if wal mode is on -WAL and -shm file get created when db:open-megatest-db is called. modtimedelta will always be < 10 so db in tmp not get synced
          ;(tmpdbmodtime (if dbfexists (db:get-last-update-time (car tmpdb)) #f))    
          ;(fmt (file-modification-time tmpdbfname))
	       (modtimedelta (and mtdbmodtime tmpdbmodtime (- mtdbmodtime tmpdbmodtime))))

          (when write-access
            (sqlite3:execute (car mtdb) "drop trigger if exists update_tests_trigger")
            (sqlite3:execute (car mtdb) "drop trigger if exists update_runs_trigger"))
          
         ;(print "mtdbmodtime " mtdbmodtime " tmpdbmodtime " tmpdbmodtime " mtdbpath " mtdbpath " " (conc *toppath* "/megatest.db"))
	        ;;(debug:print-info 13 *default-log-port* "db:open-db>> mtdbpath="mtdbpath" mtdbexists="mtdbexists" and write-access="write-access)
          (if (and dbexists (not write-access))
              (begin
                (set! *db-write-access* #f)
                (dbr:dbstruct-read-only-set! dbstruct #t)))
          (dbr:dbstruct-mtdb-set!   dbstruct mtdb)

   ;;  (debug:print 0 *default-log-port* "ERROR: attempt to open database when not on homehost. Exiting. Homehost: " (common:get-homehost))
   ;;  (exit 1))))

;; Open the classic megatest.db file (defaults to open in toppath)
;;
;;   NOTE: returns a dbdat not a dbstruct!
;;

;;(define (db:reopen-megatest-db

(define (db:open-megatest-db #!key (path #f)(name #f))
  (let* ((dbdir        (or path *toppath*))
         (dbpath       (conc  dbdir "/" (or name "megatest.db")))
	 (dbexists     (common:file-exists? dbpath))
	 (db           (db:lock-create-open dbpath
					    (lambda (db)
                                              (db:initialize-main-db db)

	 '("final_logf"     #f)
	 '("logdat"         #f)
	 '("run_duration"   #f)
	 '("comment"        #f)
	 '("event_time"     #f)
	 '("fail_count"     #f)
	 '("pass_count"     #f)
	 '("archived"       #f)
         '("last_update"    #f))
  (list "test_steps"
	 '("id"             #f)
	 '("test_id"        #f)
	 '("stepname"       #f)
	 '("state"          #f)
	 '("status"         #f)
	 '("event_time"     #f)
	 '("comment"        #f)
	 '("logfile"        #f)
         '("last_update"    #f))
   (list "test_data"
	 '("id"             #f)
	 '("test_id"        #f)
	 '("category"       #f)
	 '("variable"       #f)
	 '("value"          #f)
	 '("expected"       #f)
	 '("tol"            #f)
	 '("units"          #f)
	 '("comment"        #f)
	 '("status"         #f)
	 '("type"           #f)
         '("last_update"    #f))))

;; needs db to get keys, this is for syncing all tables
;;
(define (db:sync-main-list dbstruct)
  (let ((keys  (db:get-keys dbstruct)))
    (list
     (list "keys"
	   '("id"        #f)
	   '("fieldname" #f)
	   '("fieldtype" #f))
     (list "metadat" '("var" #f) '("val" #f))
     (append (list "runs" 
		   '("id"  #f))
	     (map (lambda (k)(list k #f))
		  (append keys
			  (list "runname" "state" "status" "owner" "event_time" "comment" "fail_count" "pass_count" "contour" "last_update"))))
     (list "test_meta"
	   '("id"             #f)
	   '("testname"       #f)
	   '("owner"          #f)
	   '("description"    #f)
	   '("reviewed"       #f)
	   '("iterated"       #f)

		 (last-update-field (if use-last-update
					(if (number? last-update)
					    "last_update"
					    (car last-update))
					#f))
		 (num-fields (length fields))
		 (field->num (make-hash-table))
		 (num->field (apply vector (map car fields))) ;; BBHERE
		 (full-sel   (conc "SELECT " (string-intersperse (map car fields) ",") 
				   " FROM " tablename (if use-last-update ;; apply last-update criteria
							  (conc " WHERE " last-update-field " >= " last-update-value)
							  "")
				   ";"))
		 (full-ins   (conc "INSERT OR REPLACE INTO " tablename " ( " (string-intersperse (map car fields) ",") " ) "
				   " VALUES ( " (string-intersperse (make-list num-fields "?") ",") " );"))
		 (fromdat    '())
		 (fromdats   '())
		 (totrecords 0)
		 (batch-len  (string->number (or (configf:lookup *configdat* "sync" "batchsize") "100")))
		 (todat      (make-hash-table))
		 (count      0)

                 (delay-handicap  (string->number (or (configf:lookup *configdat* "sync" "delay-handicap") "0")))
                 )

	    ;; set up the field->num table
	    (for-each
	     (lambda (field)
	       (hash-table-set! field->num field count)
	       (set! count (+ count 1)))
	     fields)

	    ;; tack on remaining records in fromdat
	    (if (not (null? fromdat))
		(set! fromdats (cons fromdat fromdats)))

	    (if (common:low-noise-print 120 "sync-records")
		(debug:print-info 4 *default-log-port* "found " totrecords " records to sync"))

	    ;; read the target table; BBHERE
	    (sqlite3:for-each-row
	     (lambda (a . b)
	       (hash-table-set! todat a (apply vector a b)))
	     (db:dbdat-get-db todb)
	     full-sel)

            (when (and delay-handicap (> delay-handicap 0))
              (debug:print-info 0 *default-log-port* "imposing synthetic sync delay of "delay-handicap" seconds since sync/delay-handicap is configured")
              (thread-sleep! delay-handicap)
              (debug:print-info 0 *default-log-port* "synthetic sync delay of "delay-handicap" seconds completed")
              )
            
	    ;; first pass implementation, just insert all changed rows
	    (for-each 
	     (lambda (targdb)
	       (let* ((db     (db:dbdat-get-db targdb))
		      (stmth  (sqlite3:prepare db full-ins)))
		 (db:delay-if-busy targdb) ;; NO WAITING
		 (for-each

                     comment      TEXT      DEFAULT '',
                     event_time   TIMESTAMP DEFAULT (strftime('%s','now')),
                     fail_count   INTEGER   DEFAULT 0,
                     pass_count   INTEGER   DEFAULT 0,
                     archived     INTEGER   DEFAULT 0, -- 0=no, > 1=archive block id where test data can be found
                     last_update  INTEGER DEFAULT (strftime('%s','now')),
                        CONSTRAINT testsconstraint UNIQUE (run_id, testname, item_path));")
	;; deprecated -- (sqlite3:execute db "CREATE INDEX IF NOT EXISTS tests_index ON tests (run_id, testname, item_path, uname);")
        
        (sqlite3:execute db "CREATE INDEX IF NOT EXISTS tests_run_id_index ON tests (run_id);")  ;; new
        (sqlite3:execute db "CREATE INDEX IF NOT EXISTS tests_testname_index ON tests (testname,item_path);") ;; new
        (sqlite3:execute db "CREATE INDEX IF NOT EXISTS tests_state_status_index ON tests (state, status); ") ;; new
        
	(sqlite3:execute db "CREATE TRIGGER  IF NOT EXISTS update_tests_trigger AFTER UPDATE ON tests
                             FOR EACH ROW
                               BEGIN 
                                 UPDATE tests SET last_update=(strftime('%s','now'))
                                   WHERE id=old.id;
                               END;")
	(sqlite3:execute db "CREATE TABLE IF NOT EXISTS test_steps 

;;                          end_time,strftime('%s','now') as now from tests where state in
;;      ('RUNNING','REMOTEHOSTSTART','LAUNCHED'));

(define (db:find-and-mark-incomplete dbstruct run-id ovr-deadtime)
  (let* ((incompleted '())
	 (oldlaunched '())
	 (toplevels   '())
         (deadtime-trim (or ovr-deadtime (configf:lookup-number *configdat* "setup" "deadtime")))
         (server-start-allowance 200)
         (server-overloaded-budget 200)
         (launch-monitor-off-time (or (configf:lookup-number *configdat* "setup" "test-stats-update-period") 30))
         (launch-monitor-on-time-budget 30)
         (launch-monitor-period (+ launch-monitor-off-time launch-monitor-on-time-budget server-overloaded-budget))
         (remotehoststart-deadtime-default (+ server-start-allowance server-overloaded-budget 30))
         (remotehoststart-deadtime (or deadtime-trim remotehoststart-deadtime-default))
         (running-deadtime-default (+ server-start-allowance (* 2 launch-monitor-period)))
         (running-deadtime (or deadtime-trim running-deadtime-default)) ;; two minutes (30 seconds between updates, this leaves 3x grace period)
         )
    (db:with-db 
     dbstruct #f #f
     (lambda (db)


       ;; in RUNNING or REMOTEHOSTSTART for more than 10 minutes
       ;;
       ;; HOWEVER: this code in run:test seems to work fine
       ;;              (> (- (current-seconds)(+ (db:test-get-event_time testdat)
       ;;                     (db:test-get-run_duration testdat)))
       ;;                    600) 
       ;; (db:delay-if-busy dbdat)
       (sqlite3:for-each-row 
        (lambda (test-id run-dir uname testname item-path event-time run-duration)
          (if (and (equal? uname "n/a")
                   (equal? item-path "")) ;; this is a toplevel test
              ;; what to do with toplevel? call rollup?
              (begin
                (set! toplevels   (cons (list test-id run-dir uname testname item-path run-id) toplevels))
                (debug:print-info 0 *default-log-port* "Found old toplevel test in RUNNING state, test-id=" test-id))
              (begin
                (set! incompleted (cons (list test-id run-dir uname testname item-path run-id) incompleted))
                (debug:print-info 0 *default-log-port* "Found old test in RUNNING state, test-id=" test-id" exceeded running-deadtime "running-deadtime" now="(current-seconds)" event-time="event-time" run-duration="run-duration))))
        db
        "SELECT id,rundir,uname,testname,item_path,event_time,run_duration FROM tests WHERE run_id=? AND (strftime('%s','now') - event_time) > (run_duration + ?) AND state IN ('RUNNING');"
        run-id running-deadtime)

       
       (sqlite3:for-each-row 
        (lambda (test-id run-dir uname testname item-path event-time run-duration)
          (if (and (equal? uname "n/a")
                   (equal? item-path "")) ;; this is a toplevel test
              ;; what to do with toplevel? call rollup?
              (begin
                (set! toplevels   (cons (list test-id run-dir uname testname item-path run-id) toplevels))
                (debug:print-info 0 *default-log-port* "Found old toplevel test in RUNNING state, test-id=" test-id))
              (begin
                (debug:print-info 0 *default-log-port* "Found old test in REMOTEHOSTSTART state, test-id=" test-id" exceeded running-deadtime "running-deadtime" now="(current-seconds)" event-time="event-time" run-duration="run-duration)
                (set! incompleted (cons (list test-id run-dir uname testname item-path run-id) incompleted)))))
        db
        "SELECT id,rundir,uname,testname,item_path,event_time,run_duration FROM tests WHERE run_id=? AND (strftime('%s','now') - event_time) > (run_duration + ?) AND state IN ('REMOTEHOSTSTART');"
        run-id remotehoststart-deadtime)

       ;; in LAUNCHED for more than one day. Could be long due to job queues TODO/BUG: Need override for this in config
       ;;
       ;; (db:delay-if-busy dbdat)
       (sqlite3:for-each-row
        (lambda (test-id run-dir uname testname item-path)
          (if (and (equal? uname "n/a")
                   (equal? item-path "")) ;; this is a toplevel test
              ;; what to do with toplevel? call rollup?
              (set! toplevels   (cons (list test-id run-dir uname testname item-path run-id) toplevels))
              (begin
                (debug:print-info 0 *default-log-port* "Found old test in LAUNCHED state, test-id=" test-id" 1 day since event_time marked")
                (set! oldlaunched (cons (list test-id run-dir uname testname item-path run-id) oldlaunched)))))
        db
        "SELECT id,rundir,uname,testname,item_path FROM tests WHERE run_id=? AND (strftime('%s','now') - event_time) > 86400 AND state IN ('LAUNCHED');"
        run-id)
       
       (debug:print-info 18 *default-log-port* "Found " (length oldlaunched) " old LAUNCHED items, " (length toplevels) " old LAUNCHED toplevel tests and " (length incompleted) " tests marked RUNNING but apparently dead.")

       ;; These are defunct tests, do not do all the overhead of set-state-status. Force them to INCOMPLETE.
       ;;
       ;; (db:delay-if-busy dbdat)
       (let* (;; (min-incompleted (filter (lambda (x)
              ;;      		      (let* ((testpath (cadr x))
              ;;      			     (tdatpath (conc testpath "/testdat.db"))
              ;;      			     (dbexists (common:file-exists? tdatpath)))
              ;;      			(or (not dbexists) ;; if no file then something wrong - mark as incomplete
              ;;      			    (> (- (current-seconds)(file-modification-time tdatpath)) 600)))) ;; no change in 10 minutes to testdat.db - she's dead Jim
              ;;      		    incompleted))
              (min-incompleted-ids (map car incompleted)) ;; do 'em all
              (all-ids             (append min-incompleted-ids (map car oldlaunched))))
         (if (> (length all-ids) 0)
             (begin
               (debug:print 0 *default-log-port* "WARNING: Marking test(s); " (string-intersperse (map conc all-ids) ", ") " as DEAD")
               (for-each
                (lambda (test-id)
                  (db:set-state-status-and-roll-up-items dbstruct run-id test-id 'foo "COMPLETED" "DEAD" "Test stopped responding while in RUNNING or REMOTEHOSTSTART; presumed dead."))
                  ;;(db:test-set-state-status dbstruct run-id test-id "COMPLETED" "DEAD" "Test stopped responding while in RUNNING or REMOTEHOSTSTART; presumed dead.")) ;; fix for one aspect of Randy's ticket 1405717332 ;; TODO - fix problem where test goes to COMPLETED/DEAD while in progress, only later to go to COMPLETED/PASS.  ref ticket 220546828
                all-ids))))))))

;; ALL REPLACED BY THE BLOCK ABOVE
;;
;; 	    (sqlite3:execute 
;; 	     db
;; 	     (conc "UPDATE tests SET state='INCOMPLETE' WHERE run_id=? AND id IN (" 

;;       this is inconsistent with get-runs but it makes some sense.
;;
(define (db:get-run-info dbstruct run-id)
  ;;(if (hash-table-ref/default *run-info-cache* run-id #f)
  ;;    (hash-table-ref *run-info-cache* run-id)
  (let* ((res       (vector #f #f #f #f))
	 (keys      (db:get-keys dbstruct))
	 (remfields (list "id" "runname" "state" "status" "owner" "event_time" "comment" "fail_count" "pass_count" "contour" "last_update")) ;;  "area_id"))
	 (header    (append keys remfields))
	 (keystr    (conc (keys->keystr keys) ","
			  (string-intersperse remfields ","))))
    (debug:print-info 11 *default-log-port* "db:get-run-info run-id: " run-id " header: " header " keystr: " keystr)
    
    (db:with-db
     dbstruct #f #f

      db
      "SELECT attemptnum FROM tests WHERE id=?;"
      #f
      test-id))))

(define db:test-record-fields '("id"           "run_id"        "testname"  "state"      "status"      "event_time"
				"host"         "cpuload"       "diskfree"  "uname"      "rundir"      "item_path"
                                "run_duration" "final_logf"    "comment"   "shortdir"   "attemptnum"  "archived" "last_update"))

;; fields *must* be a non-empty list
;;
(define (db:field->number fieldname fields)
  (if (null? fields)
      #f
      (let loop ((hed  (car fields))

  (db:with-db
   dbstruct
   #f ;; run-id
   #f
   (lambda (db)
     (let ((res #f))
       (sqlite3:for-each-row ;; attemptnum added to hold pid of top process (not Megatest) controlling a test
	(lambda (id run-id testname state status event-time host cpuload diskfree uname rundir-id item-path run_duration final-logf-id comment short-dir-id attemptnum archived last-update)
	  ;;                0    1       2      3      4        5       6      7        8     9     10      11          12          13           14         15          16
	  (set! res (vector id run-id testname state status event-time host cpuload diskfree uname rundir-id item-path run_duration final-logf-id comment short-dir-id attemptnum archived last-update)))
	db
	(conc "SELECT " db:test-record-qry-selector " FROM tests WHERE id=?;")
	test-id)
       res))))

;; Use db:test-get* to access
;; Get test data using test_ids. NB// Only works within a single run!!

 (define (db:get-steps-info-by-id dbstruct  test-step-id)
   (db:with-db
    dbstruct
    #f 
    #f
    (lambda (db)
      (let* ((res (vector #f #f #f #f #f #f #f #f #f)))
        (sqlite3:for-each-row 
       (lambda (id test-id stepname state status event-time logfile comment last-update)
         (set! res (vector id test-id stepname state status event-time (if (string? logfile) logfile "") comment last-update)))
       db
       "SELECT id,test_id,stepname,state,status,event_time,logfile,comment,last_update FROM test_steps WHERE id=? ORDER BY id ASC;" ;; event_time DESC,id ASC;
       test-step-id)
        res))))

(define (db:get-steps-data dbstruct run-id test-id)
  (db:with-db
   dbstruct
   run-id

 (define (db:get-data-info-by-id dbstruct  test-data-id)
   (db:with-db
    dbstruct
    #f 
    #f
    (lambda (db)
      (let* ((res (vector #f #f #f #f #f #f #f #f #f #f #f #f)))
        (sqlite3:for-each-row 
       (lambda (id test-id  category variable value expected tol units comment status type last-update)
         (set! res (vector id test-id  category variable value expected tol units comment status type last-update)))
       db
       "SELECT id,test_id, category, variable, value, expected, tol, units, comment, status, type, last_update FROM test_data WHERE id=? ORDER BY id ASC;" ;; event_time DESC,id ASC;
       test-data-id)
        res))))


;; WARNING: Do NOT call this for the parent test on an iterated test
;; Roll up test_data pass/fail results
;; look at the test_data status field, 

       (sqlite3:for-each-row 
	(lambda (id test_id category variable value expected tol units comment status type)
	  (set! res (cons (vector id test_id category variable value expected tol units comment status type) res)))
	db
	"SELECT id,test_id,category,variable,value,expected,tol,units,comment,status,type FROM test_data WHERE test_id=? AND category LIKE ? ORDER BY category,variable;" test-id categorypatt)
       (reverse res)))))

;; This routine moved from tdb.scm, :read-test-data
;;
(define (db:read-test-data* dbstruct run-id test-id categorypatt varpatt)
  (let* ((res '()))
    (db:with-db
     dbstruct #f #f
     (lambda (db)
       (sqlite3:for-each-row 

			   (db:test-get-testname testdat)
			   test-name))
	 (item-path    (db:test-get-item-path testdat))
         (tl-testdat   (db:get-test-info dbstruct run-id test-name ""))
         (tl-test-id   (if tl-testdat
			   (db:test-get-id tl-testdat)
			   #f)))
    (if (member state '("LAUNCHED" "REMOTEHOSTSTART")) 
	(db:general-call dbstruct 'set-test-start-time (list test-id)))
    (mutex-lock! *db-transaction-mutex*)
    (db:with-db
     dbstruct #f #f
     (lambda (db)
       (let ((tr-res
              (sqlite3:with-transaction

;;    if prereq test with itempath='' is COMPLETED and PASS, WARN, CHECK, or WAIVED then prereq is met
;;    if prereq test with itempath=ref-item-path and COMPLETED with PASS, WARN, CHECK, or WAIVED then prereq is met
;;
;; Note: mode 'normal means that tests must be COMPLETED and ok (i.e. PASS, WARN, CHECK, SKIP or WAIVED)
;;       mode 'toplevel means that tests must be COMPLETED only
;;       mode 'itemmatch or 'itemwait means that tests items must be COMPLETED and (PASS|WARN|WAIVED|CHECK) [[ NB// NOT IMPLEMENTED YET ]]
;;       mode 'exclusive means this test/item cannot run if the same test/item is LAUNCHED,REMOTEHOSTSTART or RUNNING
;;
;; IDEA for consideration:
;;    1. collect all tests "upstream"
;;    2. any NOT completed and good? if yes => return those as prereqs not met, if no => return null list
;; 
;; (define (db:get-prereqs-not-met dbstruct run-id waitons ref-item-path mode)
(define (db:get-prereqs-not-met dbstruct run-id waitons ref-test-name ref-item-path mode itemmaps) ;; #!key (mode '(normal))(itemmap #f))
  ;; BBnote - rollup of an itemized test's overall state/status done in db:set-state-status-and-roll-up-items
  (append
   (if (member 'exclusive mode)
       (let ((running-tests (db:get-tests-for-run dbstruct

   ;;           else if matching waiton item is not both completed and in an ok status, add as unmet prerequisite
   ;;   else
   ;;    if waiton toplevel is not in both completed and ok status, add as unmet prerequisite

   (if (or (not waitons)
	   (null? waitons))
       '()
       (let* ((ref-test-itemized-mode (not (null? (lset-intersection eq? mode '(itemmatch itemwait))))) ;; how is this different from using member?
              (ref-test-toplevel-mode (not (null? (lset-intersection eq? mode '(toplevel)))))
              (ref-test-is-toplevel   (equal? ref-item-path ""))
              (ref-test-is-item       (not ref-test-is-toplevel))
              (unmet-pre-reqs '())
	      (result         '())
              (unmet-prereq-items '())
              )

                  )
	      (for-each ; test expanded from waiton
	       (lambda (waiton-test) 
		 (let* ((waiton-state             (db:test-get-state waiton-test))
			(waiton-status            (db:test-get-status waiton-test))
			(waiton-item-path         (db:test-get-item-path waiton-test)) ;; BB- this is the upstream itempath
			(waiton-test-name         (db:test-get-testname waiton-test))
                        (waiton-is-toplevel       (equal? waiton-item-path ""))
                        (waiton-is-item           (not waiton-is-toplevel))
			(waiton-is-completed      (member waiton-state  *common:ended-states*))
			(waiton-is-running        (member waiton-state  *common:running-states*))
			(waiton-is-killed         (member waiton-state  *common:badly-ended-states*))
			(waiton-is-ok             (member waiton-status *common:well-ended-states*)) 
			;;                                              testname-b    path-a    path-b
			(same-itempath            (db:compare-itempaths ref-test-name waiton-item-path ref-item-path itemmaps)) ;; (equal? ref-item-path waiton-item-path)))
			(real-ref-test-name       (car (string-split ref-test-name "/"))) ;; I THINK ref-test-name SHOULD NEVER HAVE THE ITEM_PATH!
			(test-and-ref-are-same    (equal? real-ref-test-name waiton-test-name)))
		   (debug:print 4 *default-log-port* "waiton-test-name " waiton-test-name " ref-test-name: " ref-test-name " test-and-ref-are-same: " test-and-ref-are-same)
		   (set! ever-seen #t)
                   ;;(BB> "***consider waiton "waiton-test"/"waiton-item-path"***")
                   (cond
                    ;; case 0 - toplevel of an itemized test, at least one item in prereq has completed
                    ((and waiton-is-item ref-test-is-toplevel ref-test-itemized-mode waiton-is-completed)
                     (set! parent-waiton-met #t))

		    ((and waiton-is-completed
			  (or waiton-is-ok 
			      (member 'toplevel mode))              ;; toplevel does not block on FAIL
			  (and waiton-is-ok (member 'itemmatch mode) ;; itemmatch blocks on not ok ;; TODO: THIS IS PROBABLY A BUG.  ITEMMATCH AND ITEMWAIT ARE SYNONYMS!! WHAT HAPPENED OT ITEMWAIT???
                               ))
                     ;;(BB> "cond4")
		     (set! item-waiton-met #t))

                    ((and waiton-is-completed waiton-is-ok same-itempath)
                     ;;(BB> "cond5")
                     (set! item-waiton-met #t))
		    ((and waiton-is-completed waiton-is-ok test-and-ref-are-same) ;; probably from [waitons] table
		     (set! item-waiton-met #t))
                    (else
                     #t
                     ;;(BB> "condelse")
                     ))))
               waiton-tests)
	      ;; both requirements, parent and item-waiton must be met to NOT add item to
	      ;; prereq's not met list

                (set! result (append (if (null? waiton-tests) (list waitontest-name) waiton-tests) result))) ;; appends the string if the full record is not available
	      ;; if the test is not found then clearly the waiton is not met...
	      ;; (if (not ever-seen)(set! result (cons waitontest-name result)))))
               ((not ever-seen)
                (set! result (append (if (null? waiton-tests)(list waitontest-name) waiton-tests) result))))))
	  waitons)
	 (delete-duplicates result)))))
;;======================================================================
;; To sync individual run
;;======================================================================
(define (db:get-run-record-ids dbstruct target run keynames test-patt)
(let ((backcons (lambda (lst item)(cons item lst))))
    (db:with-db
     dbstruct #f #f 
     (lambda (db)
        (let* ((keystr (string-intersperse 
		     (map (lambda (key val)
			    (conc key " like '" val "'"))
			  keynames 
			  (string-split target "/"))
		     " AND "))
         (run-qry (conc "SELECT id FROM runs  WHERE " keystr  " and runname='" run"'"))
         (test-qry (conc "SELECT id FROM tests WHERE run_id in (" run-qry ") and testname like '" test-patt "'")))
         ;(print run-qry)
       `((runs       . ,(fold-row backcons '() db run-qry))
	 			(tests      . ,(fold-row backcons '() db test-qry))
	 			(test_steps . ,(fold-row backcons '() db (conc "SELECT id FROM test_steps WHERE test_id in (" test-qry ")")))
	 			(test_data  . ,(fold-row backcons '() db (conc "SELECT id FROM test_data  WHERE test_id in (" test-qry ")" )))
	 ))))))

;;======================================================================
;; Just for sync, procedures to make sync easy
;;======================================================================

;; get an alist of record ids changed since time since-time
;;   '((runs . (1 2 3 ...))(steps . (5 6 7 ...) ...))
;;
(define (db:get-changed-record-ids dbstruct since-time)
  ;; no transaction, allow the db to be accessed between the big queries
  (let ((backcons (lambda (lst item)(cons item lst))))
    (db:with-db
     dbstruct #f #f 
     (lambda (db)
       `((runs       . ,(fold-row backcons '() db "SELECT id FROM runs  WHERE last_update>=?" since-time))
	 (tests      . ,(fold-row backcons '() db "SELECT id FROM tests WHERE last_update>=?" since-time))
	 (test_steps . ,(fold-row backcons '() db "SELECT id FROM test_steps WHERE last_update>=?" since-time))
	 (test_data  . ,(fold-row backcons '() db "SELECT id FROM test_data  WHERE last_update>=?" since-time))
	 ;; (test_meta  . ,(fold-row backcons '() db "SELECT id FROM test_meta  WHERE last_update>?" since-time))
	 (run_stats  . ,(fold-row backcons '() db "SELECT id FROM run_stats  WHERE last_update>=?" since-time))
	 )))))

;;======================================================================
;; Extract ods file from the db
;;======================================================================

;; NOT REWRITTEN YET!!!!!