Megatest

;; SQLITE3 HELPERS
;;======================================================================

(define (db:general-sqlite-error-dump exn stmt run-id params)
  (let ((err-status ((condition-property-accessor 'sqlite3 'status #f) exn)))
    ;; check for (exn sqlite3) ((condition-property-accessor 'exn 'message) exn)
    (print "err-status: " err-status)
    (debug:print 0 #f "ERROR:  query " stmt " failed, params: " params ", error: " ((condition-property-accessor 'exn 'message) exn))
    (print-call-chain (current-error-port))))

;; convert to -inline
(define (db:first-result-default db stmt default . params)
  (handle-exceptions
   exn
   (let ((err-status ((condition-property-accessor 'sqlite3 'status #f) exn)))
     ;; check for (exn sqlite3) ((condition-property-accessor 'exn 'message) exn)
     (if (eq? err-status 'done)
	 default
	 (begin
	   (debug:print 0 #f "ERROR:  query " stmt " failed, params: " params ", error: " ((condition-property-accessor 'exn 'message) exn))
	   (print-call-chain (current-error-port))
	   default)))
   (apply sqlite3:first-result db stmt params)))

;; Get/open a database
;;    if run-id => get run specific db
;;    if #f     => get main db

		    (db:get-db dbstruct run-id)
		    dbstruct)) ;; cheat, allow for passing in a dbdat
	 (db    (db:dbdat-get-db dbdat)))
    (db:delay-if-busy dbdat)
    (handle-exceptions
     exn
     (begin
       (debug:print 0 #f "ERROR: sqlite3 issue in db:with-db, dbstruct=" dbstruct ", run-id=" run-id ", proc=" proc ", params=" params " error: " ((condition-property-accessor 'exn 'message) exn))
       (print-call-chain (current-error-port)))
     (let ((res (apply proc db params)))
       (if (vector? dbstruct)(db:done-with dbstruct run-id r/w))
       res))))

;;======================================================================
;; K E E P   F I L E D B   I N   dbstruct

  (let* ((dbdir           (db:get-dbdir))
	 (fname           (if run-id
			      (if (eq? run-id 0) "main.db" (conc run-id ".db"))
			      #f)))
    (handle-exceptions
     exn
     (begin
       (debug:print 0 #f "ERROR: Couldn't create path to " dbdir)
       (exit 1))
     (if (not (directory? dbdir))(create-directory dbdir #t)))
    (if fname
	(conc dbdir "/" fname)
	dbdir)))

(define (db:get-dbdir)

	      (db      (sqlite3:open-database fname)))
	  (sqlite3:set-busy-handler! db (make-busy-timeout 136000))
	  (db:set-sync db) ;; (sqlite3:execute db "PRAGMA synchronous = 0;")
	  (if (not file-exists)(initproc db))
	  ;; (release-dot-lock fname)
	  db)
	(begin
	  (debug:print 2 #f "WARNING: opening db in non-writable dir " fname)
	  (sqlite3:open-database fname))))) ;; )

;; This routine creates the db. It is only called if the db is not already opened
;; 
(define (db:open-rundb dbstruct run-id #!key (attemptnum 0)(do-not-open #f)) ;;  (conc *toppath* "/megatest.db") (car *configinfo*)))
  (let* ((local  (dbr:dbstruct-get-local dbstruct))
	 (rdb    (if local

		 (db           (db:lock-create-open dbpath ;; this is the database physically on disk
						    (lambda (db)
						      (handle-exceptions
						       exn
						       (begin
							 ;; (release-dot-lock dbpath)
							 (if (> attemptnum 2)
							     (debug:print 0 #f "ERROR: tried twice, cannot create/initialize db for run-id " run-id ", at path " dbpath)
							     (db:open-rundb dbstruct run-id attemptnum (+ attemptnum 1))))
						       (db:initialize-run-id-db db)
						       (sqlite3:execute 
							db
							"INSERT OR IGNORE INTO tests (id,run_id,testname,event_time,item_path,state,status) VALUES (?,?,'bogustest',strftime('%s','now'),'nowherepath','DELETED','n/a');"
							(* run-id 30000) ;; allow for up to 30k tests per run
							run-id)

	(rundb  (dbr:dbstruct-get-rundb dbstruct))
	(inmem  (dbr:dbstruct-get-inmem dbstruct))
	(maindb (dbr:dbstruct-get-main  dbstruct))
	(refdb  (dbr:dbstruct-get-refdb dbstruct))
	(olddb  (dbr:dbstruct-get-olddb dbstruct))
	;; (runid  (dbr:dbstruct-get-run-id dbstruct))
	)
    (debug:print-info 4 #f "Syncing for run-id: " run-id)
    ;; (mutex-lock! *http-mutex*)
    (if (eq? run-id 0)
	;; runid equal to 0 is main.db
	(if maindb
	    (if (or (not (number? mtime))
		    (not (number? stime))
		    (> mtime stime)
		    force-sync)
		(begin
		  (db:delay-if-busy maindb)
		  (db:delay-if-busy olddb)
		  (let ((num-synced (db:sync-tables (db:sync-main-list maindb) maindb olddb)))
		    (dbr:dbstruct-set-stime! dbstruct (current-milliseconds))
		    num-synced)
		  0))
	    (begin
	      ;; this can occur when using local access (i.e. not in a server)
	      ;; need a flag to turn it off.
	      ;;
	      (debug:print 3 #f "WARNING: call to sync main.db to megatest.db but main not initialized")
	      0))
	;; any other runid is a run
	(if (or (not (number? mtime))
		(not (number? stime))
		(> mtime stime)
		force-sync)
	    (begin

(define (db:move-and-recreate-db dbdat)
  (let* ((dbpath   (db:dbdat-get-path        dbdat))
	 (dbdir    (pathname-directory       dbpath))
	 (fname    (pathname-strip-directory dbpath))
	 (fnamejnl (conc fname "-journal"))
	 (tmpname  (conc fname "." (current-process-id)))
	 (tmpjnl   (conc fnamejnl "." (current-process-id))))
    (debug:print 0 #f "ERROR: " fname " appears corrupted. Making backup \"old/" fname "\"")
    (system (conc "cd " dbdir ";mkdir -p old;cat " fname " > old/" tmpname))
    (system (conc "rm -f " dbpath))
    (if (file-exists? fnamejnl)
	(begin
	  (debug:print 0 #f "ERROR: " fnamejnl " found, moving it to old dir as " tmpjnl)
	  (system (conc "cd " dbdir ";mkdir -p old;cat " fnamejnl " > old/" tmpjnl))
	  (system (conc "rm -f " dbdir "/" fnamejnl))))
    ;; attempt to recreate database
    (system (conc "cd " dbdir ";sqlite3 old/" tmpname " .dump | sqlite3 " fname))))
    
;; return #f to indicate the dbdat should be closed/reopened
;; else return dbdat
;;
(define (db:repair-db dbdat #!key (numtries 1))
  (let* ((dbpath   (db:dbdat-get-path        dbdat))
	 (dbdir    (pathname-directory       dbpath))
	 (fname    (pathname-strip-directory dbpath)))
    (debug:print-info 0 #f "Checking db " dbpath " for errors.")
    (cond
     ((not (file-write-access? dbdir))
      (debug:print 0 #f "WARNING: can't write to " dbdir ", can't fix " fname)
      #f)

     ;; handle special cases, megatest.db and monitor.db
     ;; 
     ;;  NOPE: apply this same approach to all db files
     ;;
     (else ;; ((equal? fname "megatest.db") ;; this file can be regenerated if needed
      (handle-exceptions
       exn
       (begin
	 ;; (db:move-and-recreate-db dbdat)
	 (if (> numtries 0)
	     (db:repair-db dbdat numtries: (- numtries 1))
	     #f)
	 (debug:print 0 #f "FATAL: file " dbpath " was found corrupted, an attempt to fix has been made but you must start over.")
	 (debug:print 0 #f
		      "   check the following:\n"
		      "      1. full directories, look in ~/ /tmp and " dbdir "\n"
		      "      2. write access to " dbdir "\n\n"
		      "   if the automatic recovery failed you may be able to recover data by doing \"" 
		      (if (member fname '("megatest.db" "monitor.db"))
			  "megatest -cleanup-db"
			  "megatest -import-megatest.db;megatest -cleanup-db")

;;
(define (db:sync-tables tbls fromdb todb . slave-dbs)
  (mutex-lock! *db-sync-mutex*)
  (handle-exceptions
   exn
   (begin
     (mutex-unlock! *db-sync-mutex*)
     (debug:print 0 #f "EXCEPTION: database probably overloaded or unreadable in db:sync-tables.")
     (print-call-chain (current-error-port))
     (debug:print 0 #f " message: " ((condition-property-accessor 'exn 'message) exn))
     (print "exn=" (condition->list exn))
     (debug:print 0 #f " status:  " ((condition-property-accessor 'sqlite3 'status) exn))
     (debug:print 0 #f " src db:  " (db:dbdat-get-path fromdb))
     (for-each (lambda (dbdat)
		 (let ((dbpath (db:dbdat-get-path dbdat)))
		   (debug:print 0 #f " dbpath:  " dbpath)
		   (if (not (db:repair-db dbdat))
		       (begin
			 (debug:print 0 #f "ERROR: Failed to rebuild " dbpath ", exiting now.")
			 (exit)))))
	       (cons todb slave-dbs))
     
     0)
;;      (if *server-run* ;; we are inside a server, throw a sync-failed error
;; 	 (signal (make-composite-condition
;; 		 (make-property-condition 'sync-failed 'message "db:sync-tables failed in a server context.")))
;; 	 0)) ;; return zero for num synced

	 ;; (set! *time-to-exit* #t) ;; let watch dog know that it is time to die.
	 ;; (tasks:server-set-state! (db:delay-if-busy tdbdat) server-id "shutting-down")
	 ;; (portlogger:open-run-close portlogger:set-port port "released")
	 ;; (exit 1)))
   (cond
    ((not fromdb) (debug:print 3 #f "WARNING: db:sync-tables called with fromdb missing") -1)
    ((not todb)   (debug:print 3 #f "WARNING: db:sync-tables called with todb missing") -2)
    ((not (sqlite3:database? (db:dbdat-get-db fromdb)))
     (debug:print 0 #f "ERROR: db:sync-tables called with fromdb not a database " fromdb) -3)
    ((not (sqlite3:database? (db:dbdat-get-db todb)))
     (debug:print 0 #f "ERROR: db:sync-tables called with todb not a database " todb) -4)
    (else
     (let ((stmts       (make-hash-table)) ;; table-field => stmt
	   (all-stmts   '())              ;; ( ( stmt1 value1 ) ( stml2 value2 ))
	   (numrecs     (make-hash-table))
	   (start-time  (current-milliseconds))
	   (tot-count   0))
       (for-each ;; table

	     full-sel)
	    
	    ;; tack on remaining records in fromdat
	    (if (not (null? fromdat))
		(set! fromdats (cons fromdat fromdats)))

	    (if (common:low-noise-print 120 "sync-records")
		(debug:print-info 4 #f "found " totrecords " records to sync"))

	    ;; read the target table
	    (sqlite3:for-each-row
	     (lambda (a . b)
	       (hash-table-set! todat a (apply vector a b)))
	     (db:dbdat-get-db todb)
	     full-sel)

		  ))
		  fromdats)
		 (sqlite3:finalize! stmth)))
	     (append (list todb) slave-dbs))))
	tbls)
       (let* ((runtime      (- (current-milliseconds) start-time))
	      (should-print (common:low-noise-print 120 "db sync" (> runtime 500)))) ;; low and high sync times treated as separate.
	 (if should-print (debug:print 3 #f "INFO: db sync, total run time " runtime " ms"))
	 (for-each 
	  (lambda (dat)
	    (let ((tblname (car dat))
		  (count   (cdr dat)))
	      (set! tot-count (+ tot-count count))
	      (if (> count 0)
		  (if should-print (debug:print 0 #f (format #f "    ~10a ~5a" tblname count))))))
	  (sort (hash-table->alist numrecs)(lambda (a b)(> (cdr a)(cdr b))))))
       tot-count)))
   (mutex-unlock! *db-sync-mutex*)))

;; options:
;;
;;  'killservers  - kills all servers

	(begin
	  (db:sync-tables (db:sync-main-list mtdb) mtdb (db:get-db dbstruct #f))
	  (for-each 
	   (lambda (run-id)
	     (db:delay-if-busy mtdb)
	     (let ((testrecs (db:get-all-tests-info-by-run-id mtdb run-id))
		   (dbstruct (if toppath (make-dbr:dbstruct path: toppath local: #t) #f)))
	       (debug:print 0 #f "INFO: Propagating " (length testrecs) " records for run-id=" run-id " to run specific db")
	       (db:replace-test-records dbstruct run-id testrecs)
	       (sqlite3:finalize! (db:dbdat-get-db (dbr:dbstruct-get-rundb dbstruct)))))
	   run-ids)))

    ;; now ensure all newdb data are synced to megatest.db
    ;; do not use the run-ids list passed in to the function
    ;;
    (if (member 'new2old options)
	(let* ((maindb      (make-dbr:dbstruct path: toppath local: #t))
	       (src-run-ids (if run-ids run-ids (db:get-all-run-ids (db:dbdat-get-db (db:get-db maindb 0)))))
	       (all-run-ids (sort (delete-duplicates (cons 0 src-run-ids)) <))
	       (count       1)
	       (total       (length all-run-ids))
	       (dead-runs  '()))
	  (for-each
	   (lambda (run-id)
	     (debug:print 0 #f "Processing run " (if (eq? run-id 0) " main.db " run-id) ", " count " of " total)
	     (set! count (+ count 1))
	     (let* ((fromdb (if toppath (make-dbr:dbstruct path: toppath local: #t) #f))
		    (frundb (db:dbdat-get-db (db:get-db fromdb run-id))))
	       ;; (db:delay-if-busy frundb)
	       ;; (db:delay-if-busy mtdb)
	       ;; (db:clean-up frundb)
	       (if (eq? run-id 0)
		   (let ((maindb  (db:dbdat-get-db (db:get-db fromdb #f))))
		     (db:sync-tables (db:sync-main-list dbstruct) (db:get-db fromdb #f) mtdb)
		     (set! dead-runs (db:clean-up-maindb (db:get-db fromdb #f)))
		     ;; 
		     ;; Feb 18, 2016: add field last_update to runs table
		     ;;
		     ;; remove all these some time after september 2016 (added in v1.6031
		     ;;
		     (handle-exceptions
		      exn
		      (if (string-match ".*duplicate.*" ((condition-property-accessor 'exn 'message) exn))
			  (debug:print 0 #f "Column last_update already added to runs table")
			  (db:general-sqlite-error-dump exn "alter table runs ..." run-id "none"))
		      (sqlite3:execute
		       maindb
		       "ALTER TABLE runs ADD COLUMN last_update INTEGER DEFAULT 0"))
		     ;; these schema changes don't need exception handling
		     (sqlite3:execute
		      maindb

		     ;; remove this some time after September 2016 (added in version v1.6031
		     ;;
		     (for-each
		      (lambda (table-name)
			(handle-exceptions
			 exn
			 (if (string-match ".*duplicate.*" ((condition-property-accessor 'exn 'message) exn))
			     (debug:print 0 #f "Column last_update already added to " table-name " table")
			     (db:general-sqlite-error-dump exn "alter table " table-name " ..." #f "none"))
			 (sqlite3:execute
			  frundb
			  (conc "ALTER TABLE " table-name " ADD COLUMN last_update INTEGER DEFAULT 0")))
			(sqlite3:execute
			 frundb
			 (conc "DROP TRIGGER IF EXISTS update_" table-name "_trigger;"))

	   all-run-ids)
	  ;; removed deleted runs
	  (let ((dbdir (tasks:get-task-db-path)))
	    (for-each (lambda (run-id)
			(let ((fullname (conc dbdir "/" run-id ".db")))
			  (if (file-exists? fullname)
			      (begin
				(debug:print 0 #f "Removing database file for deleted run " fullname)
				(delete-file fullname)))))
		      dead-runs))))

    ;; (db:close-all dbstruct)
    ;; (sqlite3:finalize! mdb)
    ))

;; keeping it around for debugging purposes only
(define (open-run-close-no-exception-handling  proc idb . params)
  (debug:print-info 11 #f "open-run-close-no-exception-handling START given a db=" (if idb "yes " "no ") ", params=" params)
  (if (or *db-write-access*
	  (not (member proc *db:all-write-procs*)))
      (let* ((db (cond
		  ((pair? idb)                 (db:dbdat-get-db idb))
		  ((sqlite3:database? idb)     idb)
		  ((not idb)                   (debug:print 0 #f "ERROR: cannot open-run-close with #f anymore"))
		  ((procedure? idb)            (idb))
		  (else   	               (debug:print 0 #f "ERROR: cannot open-run-close with #f anymore"))))
	     (res #f))
	(set! res (apply proc db params))
	(if (not idb)(sqlite3:finalize! dbstruct))
	(debug:print-info 11 #f "open-run-close-no-exception-handling END" )
	res)
      #f))

(define (open-run-close-exception-handling proc idb . params)
  (handle-exceptions
   exn
   (let ((sleep-time (random 30))
	 (err-status ((condition-property-accessor 'sqlite3 'status #f) exn)))
     (case err-status
       ((busy)
	(thread-sleep! sleep-time))
       (else
	(debug:print 0 #f "EXCEPTION: database probably overloaded or unreadable.")
	(debug:print 0 #f " message: " ((condition-property-accessor 'exn 'message) exn))
	(print "exn=" (condition->list exn))
	(debug:print 0 #f " status:  " ((condition-property-accessor 'sqlite3 'status) exn))
	(print-call-chain (current-error-port))
	(thread-sleep! sleep-time)
	(debug:print-info 0 #f "trying db call one more time....this may never recover, if necessary kill process " (current-process-id) " on host " (get-host-name) " to clean up")))
     (apply open-run-close-exception-handling proc idb params))
   (apply open-run-close-no-exception-handling proc idb params)))

;; (define open-run-close 
(define open-run-close open-run-close-exception-handling)
		;;	   open-run-close-no-exception-handling
;;			   open-run-close-exception-handling)

       (sqlite3:execute db "CREATE TABLE IF NOT EXISTS extradat (id INTEGER PRIMARY KEY, run_id INTEGER, key TEXT, val TEXT);")
       (sqlite3:execute db "CREATE TABLE IF NOT EXISTS metadat (id INTEGER PRIMARY KEY, var TEXT, val TEXT,
                                  CONSTRAINT metadat_constraint UNIQUE (var));")
       (sqlite3:execute db "CREATE TABLE IF NOT EXISTS access_log (id INTEGER PRIMARY KEY, user TEXT, accessed TIMESTAMP, args TEXT);")
       ;; Must do this *after* running patch db !! No more. 
       ;; cannot use db:set-var since it will deadlock, hardwire the code here
       (sqlite3:execute db "INSERT OR REPLACE INTO metadat (var,val) VALUES (?,?);" "MEGATEST_VERSION" (common:version-signature))
       (debug:print-info 11 #f "db:initialize END")))))

;;======================================================================
;; R U N   S P E C I F I C   D B 
;;======================================================================

(define (db:initialize-run-id-db db)
  (sqlite3:with-transaction 

    (sqlite3:for-each-row 
     (lambda (test-id run-dir uname testname item-path)
       (if (and (equal? uname "n/a")
		(equal? item-path "")) ;; this is a toplevel test
	   ;; what to do with toplevel? call rollup?
	   (begin
	     (set! toplevels   (cons (list test-id run-dir uname testname item-path run-id) toplevels))
	     (debug:print-info 0 #f "Found old toplevel test in RUNNING state, test-id=" test-id))
	   (set! incompleted (cons (list test-id run-dir uname testname item-path run-id) incompleted))))
     db
     "SELECT id,rundir,uname,testname,item_path FROM tests WHERE run_id=? AND (strftime('%s','now') - event_time) > (run_duration + ?) AND state IN ('RUNNING','REMOTEHOSTSTART');"
     run-id deadtime)

    ;; in LAUNCHED for more than one day. Could be long due to job queues TODO/BUG: Need override for this in config
    ;;
    (db:delay-if-busy dbdat)
    (sqlite3:for-each-row
     (lambda (test-id run-dir uname testname item-path)
       (if (and (equal? uname "n/a")
		(equal? item-path "")) ;; this is a toplevel test
	   ;; what to do with toplevel? call rollup?
	   (set! toplevels   (cons (list test-id run-dir uname testname item-path run-id) toplevels))
	   (set! oldlaunched (cons (list test-id run-dir uname testname item-path run-id) oldlaunched))))
     db
     "SELECT id,rundir,uname,testname,item_path FROM tests WHERE run_id=? AND (strftime('%s','now') - event_time) > 86400 AND state IN ('LAUNCHED');"
     run-id)
    
    (debug:print-info 18 #f "Found " (length oldlaunched) " old LAUNCHED items, " (length toplevels) " old LAUNCHED toplevel tests and " (length incompleted) " tests marked RUNNING but apparently dead.")
    (if (and (null? incompleted)
	     (null? oldlaunched)
	     (null? toplevels))
	#f
	#t)))

;;  select end_time-now from

    (sqlite3:for-each-row 
     (lambda (test-id run-dir uname testname item-path)
       (if (and (equal? uname "n/a")
		(equal? item-path "")) ;; this is a toplevel test
	   ;; what to do with toplevel? call rollup?
	   (begin
	     (set! toplevels   (cons (list test-id run-dir uname testname item-path run-id) toplevels))
	     (debug:print-info 0 #f "Found old toplevel test in RUNNING state, test-id=" test-id))
	   (set! incompleted (cons (list test-id run-dir uname testname item-path run-id) incompleted))))
     db
     "SELECT id,rundir,uname,testname,item_path FROM tests WHERE run_id=? AND (strftime('%s','now') - event_time) > (run_duration + ?) AND state IN ('RUNNING','REMOTEHOSTSTART');"
     run-id deadtime)

    ;; in LAUNCHED for more than one day. Could be long due to job queues TODO/BUG: Need override for this in config
    ;;
    (db:delay-if-busy dbdat)
    (sqlite3:for-each-row
     (lambda (test-id run-dir uname testname item-path)
       (if (and (equal? uname "n/a")
		(equal? item-path "")) ;; this is a toplevel test
	   ;; what to do with toplevel? call rollup?
	   (set! toplevels   (cons (list test-id run-dir uname testname item-path run-id) toplevels))
	   (set! oldlaunched (cons (list test-id run-dir uname testname item-path run-id) oldlaunched))))
     db
     "SELECT id,rundir,uname,testname,item_path FROM tests WHERE run_id=? AND (strftime('%s','now') - event_time) > 86400 AND state IN ('LAUNCHED');"
     run-id)
    
    (debug:print-info 18 #f "Found " (length oldlaunched) " old LAUNCHED items, " (length toplevels) " old LAUNCHED toplevel tests and " (length incompleted) " tests marked RUNNING but apparently dead.")

    ;; These are defunct tests, do not do all the overhead of set-state-status. Force them to INCOMPLETE.
    ;;
    (db:delay-if-busy dbdat)
    (let* (;; (min-incompleted (filter (lambda (x)
	   ;;      		      (let* ((testpath (cadr x))
	   ;;      			     (tdatpath (conc testpath "/testdat.db"))
	   ;;      			     (dbexists (file-exists? tdatpath)))
	   ;;      			(or (not dbexists) ;; if no file then something wrong - mark as incomplete
	   ;;      			    (> (- (current-seconds)(file-modification-time tdatpath)) 600)))) ;; no change in 10 minutes to testdat.db - she's dead Jim
	   ;;      		    incompleted))
	   (min-incompleted-ids (map car incompleted)) ;; do 'em all
	   (all-ids             (append min-incompleted-ids (map car oldlaunched))))
      (if (> (length all-ids) 0)
	  (begin
	    (debug:print 0 #f "WARNING: Marking test(s); " (string-intersperse (map conc all-ids) ", ") " as INCOMPLETE")
	    (sqlite3:execute 
	     db
	     (conc "UPDATE tests SET state='INCOMPLETE' WHERE id IN (" 
		   (string-intersperse (map conc all-ids) ",")
		   ");")))))

    ;; Now do rollups for the toplevel tests

;;    a. If test dir exists, set the the test to state='UNKNOWN', Set the run to 'unknown'
;;    b. If test dir gone, delete the test record
;; 2. Look at run records
;;    a. If have tests that are not deleted, set state='unknown'
;;    b. ....
;;
(define (db:clean-up dbdat)
  ;; (debug:print 0 #f "WARNING: db clean up not fully ported to v1.60, cleanup action will be on megatest.db")
  (let* ((db         (db:dbdat-get-db dbdat))
	 (count-stmt (sqlite3:prepare db "SELECT (SELECT count(id) FROM tests)+(SELECT count(id) FROM runs);"))
	(statements
	 (map (lambda (stmt)
		(sqlite3:prepare db stmt))
	      (list
	       ;; delete all tests that belong to runs that are 'deleted'

	       "DELETE FROM runs WHERE id NOT IN (SELECT DISTINCT r.id FROM runs AS r INNER JOIN tests AS t ON t.run_id=r.id);"
	       ))))
    (db:delay-if-busy dbdat)
    (sqlite3:with-transaction 
     db
     (lambda ()
       (sqlite3:for-each-row (lambda (tot)
			       (debug:print-info 0 #f "Records count before clean: " tot))
			     count-stmt)
       (map sqlite3:execute statements)
       (sqlite3:for-each-row (lambda (tot)
			       (debug:print-info 0 #f "Records count after  clean: " tot))
			     count-stmt)))
    (map sqlite3:finalize! statements)
    (sqlite3:finalize! count-stmt)
    ;; (db:find-and-mark-incomplete db)
    (db:delay-if-busy dbdat)
    (sqlite3:execute db "VACUUM;")))

;; Clean out old junk and vacuum the database
;;
;; Ultimately do something like this:
;;
;; 1. Look at test records either deleted or part of deleted run:
;;    a. If test dir exists, set the the test to state='UNKNOWN', Set the run to 'unknown'
;;    b. If test dir gone, delete the test record
;; 2. Look at run records
;;    a. If have tests that are not deleted, set state='unknown'
;;    b. ....
;;
(define (db:clean-up-rundb dbdat)
  ;; (debug:print 0 #f "WARNING: db clean up not fully ported to v1.60, cleanup action will be on megatest.db")
  (let* ((db         (db:dbdat-get-db dbdat))
	 (count-stmt (sqlite3:prepare db "SELECT (SELECT count(id) FROM tests);"))
	(statements
	 (map (lambda (stmt)
		(sqlite3:prepare db stmt))
	      (list
	       ;; delete all tests that belong to runs that are 'deleted'
	       ;; (conc "DELETE FROM tests WHERE run_id NOT IN (" (string-intersperse (map conc valid-runs) ",") ");")
	       ;; delete all tests that are 'DELETED'
	       "DELETE FROM tests WHERE state='DELETED';"
	       ))))
    (db:delay-if-busy dbdat)
    (sqlite3:with-transaction 
     db
     (lambda ()
       (sqlite3:for-each-row (lambda (tot)
			       (debug:print-info 0 #f "Records count before clean: " tot))
			     count-stmt)
       (map sqlite3:execute statements)
       (sqlite3:for-each-row (lambda (tot)
			       (debug:print-info 0 #f "Records count after  clean: " tot))
			     count-stmt)))
    (map sqlite3:finalize! statements)
    (sqlite3:finalize! count-stmt)
    ;; (db:find-and-mark-incomplete db)
    (db:delay-if-busy dbdat)
    (sqlite3:execute db "VACUUM;")))

;; Clean out old junk and vacuum the database
;;
;; Ultimately do something like this:
;;
;; 1. Look at test records either deleted or part of deleted run:
;;    a. If test dir exists, set the the test to state='UNKNOWN', Set the run to 'unknown'
;;    b. If test dir gone, delete the test record
;; 2. Look at run records
;;    a. If have tests that are not deleted, set state='unknown'
;;    b. ....
;;
(define (db:clean-up-maindb dbdat)
  ;; (debug:print 0 #f "WARNING: db clean up not fully ported to v1.60, cleanup action will be on megatest.db")
  (let* ((db         (db:dbdat-get-db dbdat))
	 (count-stmt (sqlite3:prepare db "SELECT (SELECT count(id) FROM runs);"))
	 (statements
	  (map (lambda (stmt)
		 (sqlite3:prepare db stmt))
	       (list
		;; delete all tests that belong to runs that are 'deleted'

       db
       "SELECT id FROM runs WHERE state='deleted';")
    (db:delay-if-busy dbdat)
    (sqlite3:with-transaction 
     db
     (lambda ()
       (sqlite3:for-each-row (lambda (tot)
			       (debug:print-info 0 #f "Records count before clean: " tot))
			     count-stmt)
       (map sqlite3:execute statements)
       (sqlite3:for-each-row (lambda (tot)
			       (debug:print-info 0 #f "Records count after  clean: " tot))
			     count-stmt)))
    (map sqlite3:finalize! statements)
    (sqlite3:finalize! count-stmt)
    ;; (db:find-and-mark-incomplete db)
    (db:delay-if-busy dbdat)
    (sqlite3:execute db "VACUUM;")
    dead-runs))

;;
;; scale by 10, average with current value.
;;     (set! *global-delta* (/ (+ *global-delta* (* (- (current-milliseconds) start-ms)
;; 						 (if throttle throttle 0.01)))
;; 			    2))
;;     (if (> (abs (- *last-global-delta-printed* *global-delta*)) 0.08) ;; don't print all the time, only if it changes a bit
;; 	(begin
;; 	  (debug:print-info 4 #f "launch throttle factor=" *global-delta*)
;; 	  (set! *last-global-delta-printed* *global-delta*)))

(define (db:set-var dbstruct var val)
  (let* ((dbdat (db:get-db dbstruct #f))
	 (db    (db:dbdat-get-db dbdat)))
    (sqlite3:execute db "INSERT OR REPLACE INTO metadat (var,val) VALUES (?,?);" var val)))

	 (keystr    (keys->keystr keys))	 
	 (comma     (if (> (length keys) 0) "," ""))
	 (andstr    (if (> (length keys) 0) " AND " ""))
	 (valslots  (keys->valslots keys)) ;; ?,?,? ...
	 (allvals   (append (list runname state status user) (map cadr keyvals)))
	 (qryvals   (append (list runname) (map cadr keyvals)))
	 (key=?str  (string-intersperse (map (lambda (k)(conc k "=?")) keys) " AND ")))
    (debug:print 3 #f "keys: " keys " allvals: " allvals " keyvals: " keyvals " key=?str is " key=?str)
    (debug:print 2 #f "NOTE: using target " (string-intersperse (map cadr keyvals) "/") " for this run")
    (if (and runname (null? (filter (lambda (x)(not x)) keyvals))) ;; there must be a better way to "apply and"
	(let ((res #f))
	  (db:delay-if-busy dbdat)
	  (apply sqlite3:execute db (conc "INSERT OR IGNORE INTO runs (runname,state,status,owner,event_time" comma keystr ") VALUES (?,?,?,?,strftime('%s','now')" comma valslots ");")
		 allvals)
	  (db:delay-if-busy dbdat)
	  (apply sqlite3:for-each-row 
		 (lambda (id)
		   (set! res id))
		 db
		 (let ((qry (conc "SELECT id FROM runs WHERE (runname=? " andstr key=?str ");")))
					;(debug:print 4 #f "qry: " qry) 
		   qry)
		 qryvals)
	  (db:delay-if-busy dbdat)
	  (sqlite3:execute db "UPDATE runs SET state=?,status=?,event_time=strftime('%s','now') WHERE id=? AND state='deleted';" state status res)
	  res) 
	(begin
	  (debug:print 0 #f "ERROR: Called without all necessary keys")
	  #f))))

;; replace header and keystr with a call to runs:get-std-run-fields
;;
;; keypatts: ( (KEY1 "abc%def")(KEY2 "%") )
;; runpatts: patt1,patt2 ...
;;

			   " AND state != 'deleted' ORDER BY event_time DESC "
			   (if (number? count)
			       (conc " LIMIT " count)
			       "")
			   (if (number? offset)
			       (conc " OFFSET " offset)
			       ""))))
    (debug:print-info 11 #f "db:get-runs START qrystr: " qrystr " keypatts: " keypatts " offset: " offset " limit: " count)
    (db:with-db dbstruct #f #f
		(lambda (db)		
		  (sqlite3:for-each-row
		   (lambda (a . x)
		     (set! res (cons (apply vector a x) res)))
		   db
		   qrystr
		   )))
    (debug:print-info 11 #f "db:get-runs END qrystr: " qrystr " keypatts: " keypatts " offset: " offset " limit: " count)
    (vector header res)))

;; TODO: Switch this to use max(update_time) from each run db? Then if using a server there is no disk traffic (using inmem db)
;;
(define (db:get-changed-run-ids since-time)
  (let* ((dbdir      (db:dbfile-path #f)) ;; (configf:lookup *configdat* "setup" "dbdir"))
	 (alldbs     (glob (conc dbdir "/[0-9]*.db")))
	 (changed    (filter (lambda (dbfile)
			       (> (file-modification-time dbfile) since-time))
			     alldbs)))
    (delete-duplicates
     (map (lambda (dbfile)
	    (let* ((res (string-match ".*\\/(\\d)*\\.db" dbfile)))
	      (if res
		  (string->number (cadr res))
		  (begin
		    (debug:print 2 #f "WARNING: Failed to process " dbfile " for run-id")
		    0))))
	  changed))))

;; Get all targets from the db
;;
(define (db:get-targets dbstruct)
  (let* ((res       '())

	  (let ((targ (cons a x)))
	    (if (not (hash-table-ref/default seen targ #f))
		(begin
		  (hash-table-set! seen targ #t)
		  (set! res (cons (apply vector targ) res))))))
	db
	qrystr)
       (debug:print-info 11 #f "db:get-targets END qrystr: " qrystr )
       (vector header res)))))

;; just get count of runs
(define (db:get-num-runs dbstruct runpatt)
  (db:with-db
   dbstruct
   #f
   #f
   (lambda (db)
     (let ((numruns 0))
       (debug:print-info 11 #f "db:get-num-runs START " runpatt)
       (sqlite3:for-each-row 
	(lambda (count)
	  (set! numruns count))
	db
	"SELECT COUNT(id) FROM runs WHERE runname LIKE ? AND state != 'deleted';" runpatt)
       (debug:print-info 11 #f "db:get-num-runs END " runpatt)
       numruns))))

;; (sqlite3#fold-row proc3670 init3671 db-or-stmt3672 . params3673)>
;; 
(define (db:get-raw-run-stats dbstruct run-id)
  (db:with-db
   dbstruct

		(let* ((key    (car keyval))
		       (patt   (cadr keyval))
		       (fulkey (conc ":" key))
		       (wildtype (if (substring-index "%" patt) "like" "glob")))
		  (if patt
		      (set! key-patt (conc key-patt " AND " key " " wildtype " '" patt "'"))
		      (begin
			(debug:print 0 #f "ERROR: searching for runs with no pattern set for " fulkey)
			(exit 6)))))
	      keyvals)
    (set! qry-str (conc "SELECT " keystr " FROM runs WHERE state != 'deleted' AND runname " runwildtype " ? " key-patt " ORDER BY event_time "
			(if limit  (conc " LIMIT " limit)   "")
			(if offset (conc " OFFSET " offset) "")
			";"))
    (debug:print-info 4 #f "runs:get-runs-by-patt qry=" qry-str " " runnamepatt)
    (db:with-db dbstruct #f #f ;; reads db, does not write to it.
		(lambda (db)
		  (sqlite3:for-each-row
		   (lambda (a . r)
		     (set! res (cons (list->vector (cons a r)) res)))
		   db
		   qry-str

	 (db        (db:dbdat-get-db dbdat))
	 (res       (vector #f #f #f #f))
	 (keys      (db:get-keys dbstruct))
	 (remfields (list "id" "runname" "state" "status" "owner" "event_time"))
	 (header    (append keys remfields))
	 (keystr    (conc (keys->keystr keys) ","
			  (string-intersperse remfields ","))))
    (debug:print-info 11 #f "db:get-run-info run-id: " run-id " header: " header " keystr: " keystr)
    (db:delay-if-busy dbdat)
    (sqlite3:for-each-row
     (lambda (a . x)
       (set! res (apply vector a x)))
     db 
     (conc "SELECT " keystr " FROM runs WHERE id=? AND state != 'deleted';")
     run-id)
    (debug:print-info 11 #f "db:get-run-info run-id: " run-id " header: " header " keystr: " keystr)
    (let ((finalres (vector header res)))
      ;; (hash-table-set! *run-info-cache* run-id finalres)
      finalres)))

(define (db:set-comment-for-run dbstruct run-id comment)
  (db:with-db
   dbstruct

     (let ((newlockval (if lock "locked"
			   (if unlock
			       "unlocked"
			       "locked")))) ;; semi-failsafe
       (sqlite3:execute db "UPDATE runs SET state=? WHERE id=?;" newlockval run-id)
       (sqlite3:execute db "INSERT INTO access_log (user,accessed,args) VALUES(?,strftime('%s','now'),?);"
			user (conc newlockval " " run-id))
       (debug:print-info 1 #f "" newlockval " run number " run-id)))))

(define (db:set-run-status dbstruct run-id status msg)
  (let* ((dbdat (db:get-db dbstruct #f))
	 (db    (db:dbdat-get-db dbdat)))
    (db:delay-if-busy dbdat)
    (if msg
	(sqlite3:execute db "UPDATE runs SET status=?,comment=? WHERE id=?;" status msg run-id)

;; not-in #t = above behaviour, #f = must match
;; mode:
;;  'dashboard - use state = 'COMPLETED' AND status in ( statuses ) OR state in ( states )
;;
(define (db:get-tests-for-run dbstruct run-id testpatt states statuses offset limit not-in sort-by sort-order qryvals last-update mode)
  (if (not (number? run-id))
      (begin ;; no need to treat this as an error by default
	(debug:print 4 #f "WARNING: call to db:get-tests-for-run with bad run-id=" run-id)
	;; (print-call-chain (current-error-port))
	'())
      (let* ((qryvalstr       (case qryvals
				((shortlist) "id,run_id,testname,item_path,state,status")
				((#f)        db:test-record-qry-selector) ;; "id,run_id,testname,state,status,event_time,host,cpuload,diskfree,uname,rundir,item_path,run_duration,final_logf,comment")
				(else        qryvals)))
	     (res            '())

							 (conc " ORDER BY " sort-by " ")
							 " ")))
				    (if sort-order sort-order " ")
				    (if limit  (conc " LIMIT " limit)   " ")
				    (if offset (conc " OFFSET " offset) " ")
				    ";"
				    )))
	(debug:print-info 8 #f "db:get-tests-for-run run-id=" run-id ", qry=" qry)
	(db:with-db dbstruct run-id #f
		    (lambda (db)
		      (sqlite3:for-each-row 
		       (lambda (a . b) ;; id run-id testname state status event-time host cpuload diskfree uname rundir item-path run-duration final-logf comment)
			 (set! res (cons (apply vector a b) res))) ;; id run-id testname state status event-time host cpuload diskfree uname rundir item-path run-duration final-logf comment) res)))
		       db
		       qry

	  -1 "-" "-"))

(define (db:get-tests-for-run-state-status dbstruct run-id testpatt)
  (let* ((res            '())
	 (tests-match-qry (tests:match->sqlqry testpatt))
	 (qry             (conc "SELECT id,testname,item_path,state,status FROM tests WHERE run_id=? " 
				(if tests-match-qry (conc " AND (" tests-match-qry ") ") ""))))
    (debug:print-info 8 #f "db:get-tests-for-run qry=" qry)
    (db:with-db dbstruct run-id #f
		(lambda (db)
		  (sqlite3:for-each-row
		   (lambda (id testname item-path state status)
		     ;;                      id,run_id,testname,state,status,event_time,host,cpuload,diskfree,uname,rundir,item_path,run_duration,final_logf,comment
		     (set! res (cons (vector id run-id testname state status -1         ""     -1      -1       ""    "-"  item-path -1           "-"         "-") res)))
		   db 

		   test-id)))
    res))

;; get a useful subset of the tests data (used in dashboard
;; use db:mintest-get-{id ,run_id,testname ...}
;; 
(define (db:get-tests-for-runs-mindata dbstruct run-ids testpatt states statuses not-in)
  (debug:print 0 #f "ERROR: BROKN!")
  ;; (db:get-tests-for-runs dbstruct run-ids testpatt states statuses not-in: not-in qryvals: "id,run_id,testname,state,status,event_time,item_path"))
)

;; get a useful subset of the tests data (used in dashboard
;;
(define (db:get-tests-for-run-mindata dbstruct run-id testpatt states statuses not-in)
  (db:get-tests-for-run dbstruct run-id testpatt states statuses #f #f not-in #f #f "id,run_id,testname,state,status,event_time,item_path" #f))

     run-ids)))

;; set tests with state currstate and status currstatus to newstate and newstatus
;; use currstate = #f and or currstatus = #f to apply to any state or status respectively
;; WARNING: SQL injection risk. NB// See new but not yet used "faster" version below
;;
;;  AND NOT (item_path='' AND testname in (SELECT DISTINCT testname FROM tests WHERE testname=? AND item_path != ''));")))
;;  (debug:print 0 #f "QRY: " qry)
;;  (db:delay-if-busy)
;;
;; NB// This call only operates on toplevel tests. Consider replacing it with more general call
;;
(define (db:set-tests-state-status dbstruct run-id testnames currstate currstatus newstate newstatus)
  (for-each (lambda (testname)
	      (let ((qry (conc "UPDATE tests SET state=?,status=? WHERE "

(define (db:replace-test-records dbstruct run-id testrecs)
  (db:with-db dbstruct run-id #t 
	      (lambda (db)
		(let* ((qmarks (string-intersperse (make-list (length db:test-record-fields) "?") ","))
		       (qrystr (conc "INSERT OR REPLACE INTO tests (" db:test-record-qry-selector ") VALUES (" qmarks ");"))
		       (qry    (sqlite3:prepare db qrystr)))
		  (debug:print 0 #f "INFO: migrating test records for run with id " run-id)
		  (sqlite3:with-transaction
		   db
		   (lambda ()
		     (for-each 
		      (lambda (rec)
			;; (debug:print 0 #f "INFO: Inserting values: " (string-intersperse (map conc (vector->list rec)) ",") "\n")
			(apply sqlite3:execute qry (vector->list rec)))
		      testrecs)))
		  (sqlite3:finalize! qry)))))

;; map a test-id into the proper range
;;
(define (db:adj-test-id mtdb min-test-id test-id)

	   (db:dbdat-get-db mtdb)
	   "SELECT id FROM tests WHERE id=?;"
	   new-id)
	  ;; if test-id-found then need to try again
	  (if test-id-found
	      (loop (+ new-id 1))
	      (begin
		(debug:print-info 0 #f "New test id " new-id " selected for test with id " test-id)
		(sqlite3:execute mtdb "UPDATE tests SET id=? WHERE id=?;" new-id test-id)))))))

;; move test ids into the 30k * run_id range
;;
(define (db:prep-megatest.db-adj-test-ids mtdb run-id testrecs)
  (debug:print-info 0 #f "Adjusting test ids in megatest.db for run " run-id)
  (let ((min-test-id (* run-id 30000)))
    (for-each 
     (lambda (testrec)
       (let* ((test-id (vector-ref testrec (db:field->number "id" db:test-record-fields))))
	 (db:adj-test-id (db:dbdat-get-db mtdb) min-test-id test-id)))
     testrecs)))
	

;; foo,alb,   1.2,  1.2, <=  , Amps,This is the high power circuit test
;; foo,abl,   1.2,  1.3, 0.1
;; foo,bra,   1.2, pass, silly stuff
;; faz,bar,    10,  8mA,     ,     ,"this is a comment"
;; EOF

(define (db:csv->test-data dbstruct run-id test-id csvdata)
  (debug:print 4 #f "test-id " test-id ", csvdata: " csvdata)
  (let* ((dbdat   (db:get-db dbstruct run-id))
	 (db      (db:dbdat-get-db dbdat))
	 (csvlist (csv->list (make-csv-reader
			      (open-input-string csvdata)
			      '((strip-leading-whitespace? #t)
				(strip-trailing-whitespace? #t)))))) ;; (csv->list csvdata)))
    (for-each

	      (status      (let ((s (list-ref padded-row 7)))
			     (if (and (string? s)(or (string-match (regexp "^\\s*$") s)
						     (string-match (regexp "^n/a$") s)))
				 #f
				 s))) ;; if specified on the input then use, else calculate
	      (type        (list-ref padded-row 8)))
	 ;; look up expected,tol,units from previous best fit test if they are all either #f or ''
	 (debug:print 4 #f "BEFORE: category: " category " variable: " variable " value: " value 
		      ", expected: " expected " tol: " tol " units: " units " status: " status " comment: " comment " type: " type)
	 
	 (if (and (or (not expected)(equal? expected ""))
		  (or (not tol)     (equal? expected ""))
		  (or (not units)   (equal? expected "")))
	     (let-values (((new-expected new-tol new-units)(tdb:get-prev-tol-for-test #f test-id category variable)))
			 (set! expected new-expected)
			 (set! tol      new-tol)
			 (set! units    new-units)))
	 
	 (debug:print 4 #f "AFTER:  category: " category " variable: " variable " value: " value 
		      ", expected: " expected " tol: " tol " units: " units " status: " status " comment: " comment)
	 ;; calculate status if NOT specified
	 (if (and (not status)(number? expected)(number? value)) ;; need expected and value to be numbers
	     (if (number? tol) ;; if tol is a number then we do the standard comparison
		 (let* ((max-val (+ expected tol))
			(min-val (- expected tol))
			(result  (and (>=  value min-val)(<= value max-val))))
		   (debug:print 4 #f "max-val: " max-val " min-val: " min-val " result: " result)
		   (set! status (if result "pass" "fail")))
		 (set! status ;; NB// need to assess each one (i.e. not return operator since need to act if not valid op.
		       (case (string->symbol tol) ;; tol should be >, <, >=, <=
			 ((>)  (if (>  value expected) "pass" "fail"))
			 ((<)  (if (<  value expected) "pass" "fail"))
			 ((>=) (if (>= value expected) "pass" "fail"))
			 ((<=) (if (<= value expected) "pass" "fail"))
			 (else (conc "ERROR: bad tol comparator " tol))))))
	 (debug:print 4 #f "AFTER2: category: " category " variable: " variable " value: " value 
		      ", expected: " expected " tol: " tol " units: " units " status: " status " comment: " comment)
	 (db:delay-if-busy dbdat)
	 (sqlite3:execute db "INSERT OR REPLACE INTO test_data (test_id,category,variable,value,expected,tol,units,comment,status,type) VALUES (?,?,?,?,?,?,?,?,?,?);"
			  test-id category variable value expected tol units (if comment comment "") status type)))
     csvlist)))

;; This routine moved from tdb.scm, tdb:read-test-data

		  (map (lambda (key val)
			 (conc key " like '" val "'"))
		       keynames 
		       (string-split target "/"))
		  " AND "))
	 ;; (testqry (tests:match->sqlqry testpatt))
	 (runsqry (sqlite3:prepare db (conc "SELECT id FROM runs WHERE " keystr " AND runname LIKE '" runname "';"))))
    ;; (debug:print 8 #f "db:test-get-paths-matching-keynames-target-new\n  runsqry=" runsqry "\n  tstsqry=" testqry)
    (sqlite3:for-each-row
     (lambda (rid)
       (set! row-ids (cons rid row-ids)))
     runsqry)
    (sqlite3:finalize! runsqry)
    row-ids))

	 (with-input-from-string 
	     (z3:decode-buffer
	      (base64:base64-decode
	       (string-substitute 
		(regexp "_") "=" msg #t)))
	   (lambda ()(deserialize)))
	 (begin
	   (debug:print 0 #f "ERROR: reception failed. Received " msg " but cannot translate it.")
	   msg))) ;; crude reply for when things go awry
    ((zmq nmsg)(with-input-from-string msg (lambda ()(deserialize))))
    (else msg)))

(define (db:test-set-status-state dbstruct run-id test-id status state msg)
  (let ((dbdat  (db:get-db dbstruct run-id)))
    (if (member state '("LAUNCHED" "REMOTEHOSTSTART"))

       (sqlite3:for-each-row 
	(lambda (path final_logf)
	  ;; (let ((path       (sdb:qry 'getstr path-id))
	  ;;       (final_logf (sdb:qry 'getstr final_logf-id)))
	  (set! logf final_logf)
	  (set! res (list path final_logf))
	  (if (directory? path)
	      (debug:print 2 #f "Found path: " path)
	      (debug:print 2 #f "No such path: " path))) ;; )
	db
	"SELECT rundir,final_logf FROM tests WHERE testname=? AND item_path='';"
	test-name)
       res))))

;;======================================================================
;; A G R E G A T E D   T R A N S A C T I O N   D B   W R I T E S 

	  (apply sqlite3:for-each-row
		 (lambda (id)
		   (set! prev-run-ids (cons id prev-run-ids)))
		 db
		 (conc "SELECT id FROM runs WHERE " qrystr " AND id != ?;") (append keyvals (list run-id)))
	  ;; collect all matching tests for the runs then
	  ;; extract the most recent test and return that.
	  (debug:print 4 #f "selstr: " selstr ", qrystr: " qrystr ", keyvals: " keyvals 
		       ", previous run ids found: " prev-run-ids)
	  (if (null? prev-run-ids) '()  ;; no previous runs? return null
	      (let loop ((hed (car prev-run-ids))
			 (tal (cdr prev-run-ids)))
		(let ((results (db:get-tests-for-run dbstruct hed (conc test-name "/" item-path) '() '() #f #f #f #f #f #f #f 'normal)))
		  (debug:print 4 #f "Got tests for run-id " run-id ", test-name " test-name 
			       ", item-path " item-path " results: " (intersperse results "\n"))
		  ;; Keep only the youngest of any test/item combination
		  (for-each 
		   (lambda (testdat)
		     (let* ((full-testname (conc (db:test-get-testname testdat) "/" (db:test-get-item-path testdat)))
			    (stored-test   (hash-table-ref/default tests-hash full-testname #f)))
		       (if (or (not stored-test)

      (if dbdat
	  (let* ((dbpath (db:dbdat-get-path dbdat))
		 (db     (db:dbdat-get-db   dbdat)) ;; we'll return this so (db:delay--if-busy can be called inline
		 (dbfj   (conc dbpath "-journal")))
	    (if (handle-exceptions
		 exn
		 (begin
		   (debug:print-info 0 #f "WARNING: failed to test for existance of " dbfj)
		   (thread-sleep! 1)
		   (db:delay-if-busy count (- count 1)))
		 (file-exists? dbfj))
		(case count
		  ((6)
		   (thread-sleep! 0.2)
		   (db:delay-if-busy count: 5))

		  ((2)
		   (thread-sleep! 3.2)
		   (db:delay-if-busy count: 1))
		  ((1)
		   (thread-sleep! 6.4)
		   (db:delay-if-busy count: 0))
		  (else
		   (debug:print-info 0 #f "delaying db access due to high database load.")
		   (thread-sleep! 12.8))))
	    db)
	  "bogus result from db:delay-if-busy")))

(define (db:test-get-records-for-index-file dbstruct run-id test-name)
  (let ((res '()))
    (db:with-db

;; A routine to map itempaths using a itemmap
;; patha and pathb must be strings or this will fail
;;
;; path-b is waiting on path-a
;;
(define (db:compare-itempaths test-b-name path-a path-b itemmaps )
  (debug:print-info 6 #f "ITEMMAPS: " itemmaps)
  (let* ((itemmap    (tests:lookup-itemmap itemmaps test-b-name)))
    (if itemmap
	(let ((path-b-mapped (db:multi-pattern-apply path-b itemmap)))
	  (debug:print-info 6 #f "ITEMMAP is " itemmap ", path: " path-b ", mapped path: " path-b-mapped)
	  (equal? path-a path-b-mapped))
	(equal? path-b path-a))))

;; A routine to convert test/itempath using a itemmap
;; NOTE: to process only an itempath (i.e. no prepended testname)
;;       just call db:multi-pattern-apply
;;
(define (db:convert-test-itempath path-in itemmap)
  (debug:print-info 6 #f "ITEMMAP is " itemmap)
  (let* ((path-parts  (string-split path-in "/"))
	 (test-name   (if (null? path-parts) "" (car path-parts)))
	 (item-path   (string-intersperse (if (null? path-parts) '() (cdr path-parts)) "/")))
    (conc test-name "/" 
	  (db:multi-pattern-apply item-path itemmap))))

;; patterns are:

		   (res item-path))
	  (let* ((parts (string-split hed))
		 (patt  (car parts))
		 (repl  (if (> (length parts) 1)(cadr parts) ""))
		 (newr  (if (and patt repl)
			    (string-substitute patt repl res)
			    (begin
			      (debug:print 0 #f "WARNING: itemmap has problem \"" itemmap "\", patt: " patt ", repl: " repl)
			      res))))
	    (if (null? tal)
		newr
		(loop (car tal)(cdr tal) newr)))))))

;; the new prereqs calculation, looks also at itempath if specified
;; all prereqs must be met

              tm.tags,r.owner,t.comment,
              author,
              tm.owner,reviewed,
              diskfree,uname,rundir,
              host,cpuload
            FROM tests AS t JOIN runs AS r ON t.run_id=r.id JOIN test_meta AS tm ON tm.testname=t.testname
            WHERE runname LIKE ? AND " keyqry ";")))
    (debug:print 2 #f "Using " tempdir " for constructing the ods file. keyqry: " keyqry " keystr: " keysstr " with keys: " (map cadr keypatt-alist)
		 "\n      mainqry: " mainqry)
    ;; "Expected Value"
    ;; "Value Found"
    ;; "Tolerance"
    (apply sqlite3:for-each-row
	   (lambda (test-id . b)
	     (set! test-ids (cons test-id test-ids))   ;; test-id is now testname

								      (append res (list (vector-ref vb (+ i 2))))))))
					       (runname   (vector-ref vb 1))
					       (testname  (vector-ref vb (+  2 numkeys)))
					       (item-path (vector-ref vb (+  3 numkeys)))
					       (final-log (vector-ref vb (+  7 numkeys)))
					       (run-dir   (vector-ref vb (+ 18 numkeys)))
					       (log-fpath (conc run-dir "/"  final-log))) ;; (string-intersperse keyvals "/") "/" testname "/" item-path "/"
					  (debug:print 4 #f "log: " log-fpath " exists: " (file-exists? log-fpath))
					  (vector-set! vb (+ 7 numkeys) (if (file-exists? log-fpath)
									    (let ((newpath (conc pathmod "/"
												 (string-intersperse keyvals "/")
												 "/" runname "/" testname "/"
												 (if (string=? item-path "") "" (conc "/" item-path))
												 final-log)))
									      ;; for now throw away newpath and use the log-fpath conc'd with pathmod
									      (set! newpath (conc pathmod log-fpath))
									      (if windows (string-translate newpath "/" "\\") newpath))
									    (if (debug:debug-mode 1)
										(conc final-log " not-found")
										"")))
					  (vector->list vb))
					b)))))
	   db
	   mainqry
	   runspatt (map cadr keypatt-alist))
    (debug:print 2 #f "Found " (length test-ids) " records")
    (set! results (list (cons "Runs" results)))
    ;; now, for each test, collect the test_data info and add a new sheet
    (for-each
     (lambda (test-id)
       (let ((test-data (list testdata-header))
	     (curr-test-name #f))
	 (sqlite3:for-each-row

    (system (conc "mkdir -p " tempdir))
    ;; (pp results)
    (ods:list->ods 
     tempdir
     (if (string-match (regexp "^[/~]+.*") outputfile) ;; full path?
	 outputfile
	 (begin
	   (debug:print 0 #f "WARNING: path given, " outputfile " is relative, prefixing with current directory")
	   (conc (current-directory) "/" outputfile)))
     results)
    ;; brutal clean up
    (system "rm -rf tempdir")))

;; (db:extract-ods-file db "outputfile.ods" '(("sysname" "%")("fsname" "%")("datapath" "%")) "%")