Megatest

(declare (uses subrunmod))
(declare (uses archivemod))
(declare (uses fsmod))

(use srfi-69)

(module runsmod
	(
	 runs:get-mt-env-alist
	 setup-env-defaults
	 runs:clean-cache
	 rmt:find-and-mark-incomplete
	 launch:setup
	 launch:end-of-run-check
	 launch:test-copy

	 set-item-env-vars
	 runs:set-megatest-env-vars
	 full-runconfigs-read
	 runs:operate-on

	 runs:update-all-test_meta
	 runs:handle-locking
	 ;; runs:rollup-run ;; not ported
	 runs:run-tests
	 runs:remove-all-but-last-n-runs-per-target
	 general-run-call
	 )

(import scheme)
(cond-expand
 (chicken-4
  
  (import chicken
	  ports

	tasksmod
	testsmod
	subrunmod
	archivemod
	fsmod
	)

;; (include "common_records.scm")
;; (include "key_records.scm")
;; (include "db_records.scm")
(include "run_records.scm")
;; (include "test_records.scm")

;; use this struct to facilitate refactoring
;;

	 (lambda ()
	   ;; jobtools maxload is useful for where the full Megatest run is done on one machine
	   (if (and (not (rmt:on-homehost?))
		    maxload) ;; only gate if maxload is specified, NOTE: maxload is normalized, i.e. load=1 means all cpus fully utilized
	       (common:wait-for-normalized-load maxload "Waiting for load to drop before starting more tests" #f))
	   
	   ;; jobtools maxhomehostload is intended to prevent overloading on the homehost which can cause database corruption issues
	   ;; (if maxhomehostload
	   ;;     (common:wait-for-homehost-load
	   ;; 	maxhomehostload
	   ;; 	(conc "Waiting for homehost load to drop below normalized value of " maxhomehostload)))
	   )))
    
 
    
    (if (and (not (null? prereqs-not-met))
	     (runs:lownoise (conc "waiting on tests " prereqs-not-met hed) 60))
	(debug:print-info 2 *default-log-port* "waiting on tests; " (string-intersperse (runs:mixed-list-testname-and-testrec->list-of-strings prereqs-not-met) ", ")))

		(if (member (symbol->string archive-command) '("save-remove"))
                    (begin 
                     (debug:print-info 0 *default-log-port* "remove testdat")
		    (runs:remove-test-directory test-dat 'archive-remove)))))
	    (hash-table-ref test-groups test-base)))))
       (hash-table-keys disk-groups))
    #t))

;;======================================================================
;; Maintenance
;;======================================================================

(define (rmt:find-and-mark-incomplete run-id ovr-deadtime)
  (let* ((cfg-deadtime             (configf:lookup-number *configdat* "setup" "deadtime"))
	 (test-stats-update-period (configf:lookup-number *configdat* "setup" "test-stats-update-period")))
   (rmt:find-and-mark-incomplete-engine run-id ovr-deadtime cfg-deadtime test-stats-update-period)
   ;;call end of eud of run detection for posthook
   (launch:end-of-run-check run-id)))

;;  select end_time-now from
;;      (select testname,item_path,event_time+run_duration as
;;                          end_time,strftime('%s','now') as now from tests where state in
;;      ('RUNNING','REMOTEHOSTSTART','LAUNCHED'));
;;
;; NOT EASY TO MIGRATE TO db{file,mod}
;;
(define (rmt:find-and-mark-incomplete-engine run-id ovr-deadtime cfg-deadtime test-stats-update-period)
  (let* ((incompleted '())
	 (oldlaunched '())
	 (toplevels   '())
          ;; The default running-deadtime is 720 seconds = 12 minutes.
          ;; "(running-deadtime-default (+ server-start-allowance (* 2 launch-monitor-period)))" = 200 + (2 * (200 + 30 + 30))
         (deadtime-trim (or ovr-deadtime cfg-deadtime))
         (server-start-allowance 200)
         (server-overloaded-budget 200)
         (launch-monitor-off-time (or test-stats-update-period 30))
         (launch-monitor-on-time-budget 30)
         (launch-monitor-period (+ launch-monitor-off-time launch-monitor-on-time-budget server-overloaded-budget))
         (remotehoststart-deadtime-default (+ server-start-allowance server-overloaded-budget 30))
         (remotehoststart-deadtime (or deadtime-trim remotehoststart-deadtime-default))
         (running-deadtime-default (+ server-start-allowance (* 2 launch-monitor-period)))
         (running-deadtime (or deadtime-trim running-deadtime-default))) ;; two minutes (30 seconds between updates, this leaves 3x grace period)

    (debug:print-info 4  *default-log-port* "running-deadtime = " running-deadtime)
    (debug:print-info 4  *default-log-port* "deadtime-trim = " deadtime-trim)

    (let* ((dat (rmt:get-toplevels-and-incompletes run-id running-deadtime remotehoststart-deadtime)))
      (set! oldlaunched (list-ref dat 1))
      (set! toplevels   (list-ref dat 2))
      (set! incompleted (list-ref dat 0)))

    (debug:print-info 18 *default-log-port* "Found " (length oldlaunched) " old LAUNCHED items, "
		      (length toplevels) " old LAUNCHED toplevel tests and "
		      (length incompleted) " tests marked RUNNING but apparently dead.")
  
    ;; These are defunct tests, do not do all the overhead of set-state-status. Force them to INCOMPLETE.
    ;;
    ;; (db:delay-if-busy dbdat)
    (let* ((min-incompleted-ids (map car incompleted)) ;; do 'em all
	   (all-ids             (append min-incompleted-ids (map car oldlaunched))))
      (if (> (length all-ids) 0)
	  (begin
	    ;; (launch:is-test-alive "localhost" 435)
	    (debug:print 0 *default-log-port* "WARNING: Marking test(s); " (string-intersperse (map conc all-ids) ", ")
			 " as DEAD")
	    (for-each
             (lambda (test-id)
               (let* ((tinfo   (rmt:get-test-info-by-id run-id test-id))
		      (run-dir (db:test-get-rundir     tinfo))
		      (host    (db:test-get-host       tinfo))
		      (pid     (db:test-get-process_id tinfo))
		      (result (rmt:get-status-from-final-status-file run-dir)))
		 (if (and (list? result) (> (length result) 1) (equal? "PASS" (cadr result)) (equal? "COMPLETED" (car result))) 
		     (begin
		       (debug:print 0 *default-log-port* "INFO: test " test-id " actually passed, so marking PASS not DEAD")
		       (rmt:set-state-status-and-roll-up-items
			run-id test-id 'foo "COMPLETED" "PASS"
			"Test stopped responding but it has PASSED; marking it PASS in the DB."))
		     (let ((is-alive (and (not (eq? pid 0))  ;; 0 is default in re-used field "attemptnum" where pid stored.
					  (commonmod:is-test-alive host pid))))
		       (if is-alive
			   (debug:print 0 *default-log-port* "INFO: test " test-id " on host " host
					" has a process on pid " pid ", NOT setting to DEAD.")
			   (begin
			     (debug:print 0 *default-log-port* "INFO: test " test-id
					  " final state/status is not COMPLETED/PASS. It is " result)
			     (rmt:set-state-status-and-roll-up-items
			      run-id test-id 'foo "COMPLETED" "DEAD"
			      "Test stopped responding while in RUNNING or REMOTEHOSTSTART; presumed dead.")))))))
	     ;; call end of eud of run detection for posthook - from merge, is it needed?
	     ;; (launch:end-of-run-check run-id)
	     all-ids)
	    )))))



)