Megatest

Diff
Login

Differences From Artifact [75aee75df2]:

To Artifact [82ef1f6781]:


17
18
19
20
21
22
23

24
25
26
27
28
29
30
(declare (uses db))
(declare (uses common))
(declare (uses items))
(declare (uses runconfig))
(declare (uses tests))
(declare (uses server))
(declare (uses mt))


(include "common_records.scm")
(include "key_records.scm")
(include "db_records.scm")
(include "run_records.scm")
(include "test_records.scm")








>







17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
(declare (uses db))
(declare (uses common))
(declare (uses items))
(declare (uses runconfig))
(declare (uses tests))
(declare (uses server))
(declare (uses mt))
;; (declare (uses filedb))

(include "common_records.scm")
(include "key_records.scm")
(include "db_records.scm")
(include "run_records.scm")
(include "test_records.scm")

54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
	  (toppath     *toppath*)
	  (envdat      keyvals) ;; initial values start with keyvals
	  (runconfig   #f)
	  (serverdat   (if (args:get-arg "-server")
			   *runremote*
			   #f)) ;; to be used later
	  (transport   (or (args:get-arg "-transport") 'http))
	  (db          (if (and mconfig
				(or (args:get-arg "-server")
				    (eq? transport 'fs)))
			   (open-db)
			   #f))
	  (run-id      #f))
    ;; Set all the environment vars we know so far, start with keys
    (for-each (lambda (keyval)
		(setenv (car keyval)(cadr keyval)))
	      keyvals)
    ;; Set up various and sundry known vars here
    (setenv "MT_RUN_AREA_HOME" toppath)







<
<
<
<
<







55
56
57
58
59
60
61





62
63
64
65
66
67
68
	  (toppath     *toppath*)
	  (envdat      keyvals) ;; initial values start with keyvals
	  (runconfig   #f)
	  (serverdat   (if (args:get-arg "-server")
			   *runremote*
			   #f)) ;; to be used later
	  (transport   (or (args:get-arg "-transport") 'http))





	  (run-id      #f))
    ;; Set all the environment vars we know so far, start with keys
    (for-each (lambda (keyval)
		(setenv (car keyval)(cadr keyval)))
	      keyvals)
    ;; Set up various and sundry known vars here
    (setenv "MT_RUN_AREA_HOME" toppath)
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127


128

129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151

152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
	  (debug:print 0 "ERROR: [" (args:get-arg "-reqtarg") "] not found in " runconfigf)
	  (if db (sqlite3:finalize! db))
	  (exit 1)))
    ;; Now have runconfigs data loaded, set environment vars
    (for-each (lambda (section)
		(for-each (lambda (varval)
			    (set! envdat (append envdat (list varval)))
			    (setenv (car varval)(cadr varval)))
			  (configf:get-section runconfig section)))
	      (list "default" target))
    (vector target runname testpatt keys keyvals envdat mconfig runconfig serverdat transport db toppath run-id)))

(define (runs:set-megatest-env-vars run-id #!key (inkeys #f)(inrunname #f)(inkeyvals #f))
  (let* ((target    (or (common:args-get-target)
			(get-environment-variable "MT_TARGET")))
	 (keys      (if inkeys    inkeys    (cdb:remote-run db:get-keys #f)))
	 (keyvals   (if inkeyvals inkeyvals (keys:target->keyval keys target)))
	 (vals      (hash-table-ref/default *env-vars-by-run-id* run-id #f))
	 (link-tree (configf:lookup *configdat* "setup" "linktree")))
    ;; get the info from the db and put it in the cache
    (if link-tree
	(setenv "MT_LINKTREE" link-tree)
	(debug:print 0 "ERROR: linktree not set, should be set in megatest.config in [setup] section."))
    (if (not vals)
	(let ((ht (make-hash-table)))
	  (hash-table-set! *env-vars-by-run-id* run-id ht)
	  (set! vals ht)
	  (for-each
	   (lambda (key)
	     (hash-table-set! vals (car key) (cadr key))) ;; (cdb:remote-run db:get-run-key-val #f run-id (car key))))
	   keyvals)))
    ;; from the cached data set the vars
    (hash-table-for-each
     vals
     (lambda (key val)
       (debug:print 2 "setenv " key " " val)
       (if (and (string? key)
		(string? val))
	   (setenv key val)
	   (debug:print 0 "ERROR: Malformed environment variable definition: var=" var ", val=" val))))
    (if (not (get-environment-variable "MT_TARGET"))(setenv "MT_TARGET" target))
    (alist->env-vars (hash-table-ref/default *configdat* "env-override" '()))
    ;; Lets use this as an opportunity to put MT_RUNNAME in the environment


    (setenv "MT_RUNNAME" (if inrunname inrunname (cdb:remote-run db:get-run-name-from-id #f run-id)))

    (setenv "MT_RUN_AREA_HOME" *toppath*)))

(define (set-item-env-vars itemdat)
  (for-each (lambda (item)
	      (debug:print 2 "setenv " (car item) " " (cadr item))
	      (setenv (car item) (cadr item)))
	    itemdat))

;; Every time can-run-more-tests is called increment the delay
;;
;; NOTE: We run this server-side!! Do not use this global except in the runs:can-run-more-tests routine
;;
(define *last-num-running-tests* 0)
(define *runs:can-run-more-tests-count* 0)
(define (runs:shrink-can-run-more-tests-count) ;; the db is a dummy var so we can use cdb:remote-run
  (set! *runs:can-run-more-tests-count* 0)) ;; (/ *runs:can-run-more-tests-count* 2)))

;; Temporary globals. Move these into the logic or into common
;;
(define *seen-cant-run-tests* (make-hash-table)) ;; use to track tests that we suspect cannot be run
(define (runs:inc-cant-run-tests testname)
  (hash-table-set! *seen-cant-run-tests* testname
		   (+ (hash-table-ref/default *seen-cant-run-tests* testname 0) 1)))

(define (runs:can-keep-running? testname n)
  (< (hash-table-ref/default *seen-cant-run-tests* testname 0) n))

(define *runs:denoise* (make-hash-table)) ;; key => last-time-ran

(define (runs:lownoise key waitval)
  (let ((lasttime (hash-table-ref/default *runs:denoise* key 0))
	(currtime (current-seconds)))
    (if (> (- currtime lasttime) waitval)
	(begin
	  (hash-table-set! *runs:denoise* key currtime)
	  #t)
	#f)))

(define (runs:can-run-more-tests jobgroup max-concurrent-jobs)
  (thread-sleep! (cond
		  ((> *runs:can-run-more-tests-count* 20) 2);; obviously haven't had any work to do for a while
		  (else 0)))
  (let* ((num-running             (cdb:remote-run db:get-count-tests-running #f))
	 (num-running-in-jobgroup (cdb:remote-run db:get-count-tests-running-in-jobgroup #f jobgroup))
	 (job-group-limit         (let ((jobg-count (config-lookup *configdat* "jobgroups" jobgroup)))
				    (if (string? jobg-count)
					(string->number jobg-count)
					jobg-count))))
    (if (> (+ num-running num-running-in-jobgroup) 0)
	(set! *runs:can-run-more-tests-count* (+ *runs:can-run-more-tests-count* 1)))
    (if (not (eq? *last-num-running-tests* num-running))







|







|













|






<
<
|
<



>
>
|
>














|








>














|



|
|







81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116


117

118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
	  (debug:print 0 "ERROR: [" (args:get-arg "-reqtarg") "] not found in " runconfigf)
	  (if db (sqlite3:finalize! db))
	  (exit 1)))
    ;; Now have runconfigs data loaded, set environment vars
    (for-each (lambda (section)
		(for-each (lambda (varval)
			    (set! envdat (append envdat (list varval)))
			    (safe-setenv (car varval)(cadr varval)))
			  (configf:get-section runconfig section)))
	      (list "default" target))
    (vector target runname testpatt keys keyvals envdat mconfig runconfig serverdat transport db toppath run-id)))

(define (runs:set-megatest-env-vars run-id #!key (inkeys #f)(inrunname #f)(inkeyvals #f))
  (let* ((target    (or (common:args-get-target)
			(get-environment-variable "MT_TARGET")))
	 (keys    (if inkeys    inkeys    (rmt:get-keys)))
	 (keyvals   (if inkeyvals inkeyvals (keys:target->keyval keys target)))
	 (vals      (hash-table-ref/default *env-vars-by-run-id* run-id #f))
	 (link-tree (configf:lookup *configdat* "setup" "linktree")))
    ;; get the info from the db and put it in the cache
    (if link-tree
	(setenv "MT_LINKTREE" link-tree)
	(debug:print 0 "ERROR: linktree not set, should be set in megatest.config in [setup] section."))
    (if (not vals)
	(let ((ht (make-hash-table)))
	  (hash-table-set! *env-vars-by-run-id* run-id ht)
	  (set! vals ht)
	  (for-each
	   (lambda (key)
	     (hash-table-set! vals (car key) (cadr key)))
	   keyvals)))
    ;; from the cached data set the vars
    (hash-table-for-each
     vals
     (lambda (key val)
       (debug:print 2 "setenv " key " " val)


       (safe-setenv key val)))

    (if (not (get-environment-variable "MT_TARGET"))(setenv "MT_TARGET" target))
    (alist->env-vars (hash-table-ref/default *configdat* "env-override" '()))
    ;; Lets use this as an opportunity to put MT_RUNNAME in the environment
    (let ((runname  (if inrunname inrunname (rmt:get-run-name-from-id run-id))))
      (if runname
	  (setenv "MT_RUNNAME" runname)
	  (debug:print 0 "ERROR: no value for runname for id " run-id)))
    (setenv "MT_RUN_AREA_HOME" *toppath*)))

(define (set-item-env-vars itemdat)
  (for-each (lambda (item)
	      (debug:print 2 "setenv " (car item) " " (cadr item))
	      (setenv (car item) (cadr item)))
	    itemdat))

;; Every time can-run-more-tests is called increment the delay
;;
;; NOTE: We run this server-side!! Do not use this global except in the runs:can-run-more-tests routine
;;
(define *last-num-running-tests* 0)
(define *runs:can-run-more-tests-count* 0)
(define (runs:shrink-can-run-more-tests-count)
  (set! *runs:can-run-more-tests-count* 0)) ;; (/ *runs:can-run-more-tests-count* 2)))

;; Temporary globals. Move these into the logic or into common
;;
(define *seen-cant-run-tests* (make-hash-table)) ;; use to track tests that we suspect cannot be run
(define (runs:inc-cant-run-tests testname)
  (hash-table-set! *seen-cant-run-tests* testname
		   (+ (hash-table-ref/default *seen-cant-run-tests* testname 0) 1)))

(define (runs:can-keep-running? testname n)
  (< (hash-table-ref/default *seen-cant-run-tests* testname 0) n))

(define *runs:denoise* (make-hash-table)) ;; key => last-time-ran

(define (runs:lownoise key waitval)
  (let ((lasttime (hash-table-ref/default *runs:denoise* key 0))
	(currtime (current-seconds)))
    (if (> (- currtime lasttime) waitval)
	(begin
	  (hash-table-set! *runs:denoise* key currtime)
	  #t)
	#f)))

(define (runs:can-run-more-tests run-id jobgroup max-concurrent-jobs)
  (thread-sleep! (cond
		  ((> *runs:can-run-more-tests-count* 20) 2);; obviously haven't had any work to do for a while
		  (else 0)))
  (let* ((num-running             (rmt:get-count-tests-running run-id))
	 (num-running-in-jobgroup (rmt:get-count-tests-running-in-jobgroup run-id jobgroup))
	 (job-group-limit         (let ((jobg-count (config-lookup *configdat* "jobgroups" jobgroup)))
				    (if (string? jobg-count)
					(string->number jobg-count)
					jobg-count))))
    (if (> (+ num-running num-running-in-jobgroup) 0)
	(set! *runs:can-run-more-tests-count* (+ *runs:can-run-more-tests-count* 1)))
    (if (not (eq? *last-num-running-tests* num-running))
195
196
197
198
199
200
201

202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219


220
221



222
223




224



225
226
227
228
229
230
231
				       (>= num-running-in-jobgroup job-group-limit))
				  (if (runs:lownoise (conc "maxjobgroup " jobgroup) 60)
				      (debug:print 1 "WARNING: number of jobs " num-running-in-jobgroup 
						   " in jobgroup \"" jobgroup "\" exceeds limit of " job-group-limit))
				  #t)
				 (else #f))))
	  (list (not can-not-run-more) num-running num-running-in-jobgroup max-concurrent-jobs job-group-limit)))))


;;  test-names: Comma separated patterns same as test-patts but used in selection 
;;              of tests to run. The item portions are not respected.
;;              FIXME: error out if /patt specified
;;            
(define (runs:run-tests target runname test-patts user flags #!key (run-count 3)) ;; test-names
  (common:clear-caches) ;; clear all caches
  (let* ((keys               (keys:config-get-fields *configdat*))
	 (keyvals            (keys:target->keyval keys target))
	 (run-id             (cdb:remote-run db:register-run #f keyvals runname "new" "n/a" user))  ;;  test-name)))
	 (deferred          '()) ;; delay running these since they have a waiton clause
	 (runconfigf         (conc  *toppath* "/runconfigs.config"))
	 (test-records       (make-hash-table))
	 ;; need to process runconfigs before generating these lists
	 (all-tests-registry #f)  ;; (tests:get-all)) ;; (tests:get-valid-tests (make-hash-table) test-search-path)) ;; all valid tests to check waiton names
	 (all-test-names     #f)  ;; (hash-table-keys all-tests-registry))
	 (test-names         #f)  ;; (tests:filter-test-names all-test-names test-patts))
	 (required-tests     #f)) ;;(lset-intersection equal? (string-split test-patts ",") test-names))) ;; test-names)) ;; Added test-names as initial for required-tests but that failed to work



    ;; Update the synchronous setting in the db based on the default or what is set by the user



    ;; This is done once here on a call to run tests rather than on every call to open-db
    (cdb:remote-run db:set-sync #f)








    (runs:set-megatest-env-vars run-id inkeys: keys inrunname: runname) ;; these may be needed by the launching process
    (if (file-exists? runconfigf)
	(setup-env-defaults runconfigf run-id *already-seen-runconfig-info* keyvals target)
	(debug:print 0 "WARNING: You do not have a run config file: " runconfigf))

    ;; Now generate all the tests lists
    (set! all-tests-registry (tests:get-all))







>






<


|







|
>
>

<
>
>
>
|
|
>
>
>
>

>
>
>







192
193
194
195
196
197
198
199
200
201
202
203
204
205

206
207
208
209
210
211
212
213
214
215
216
217
218
219

220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
				       (>= num-running-in-jobgroup job-group-limit))
				  (if (runs:lownoise (conc "maxjobgroup " jobgroup) 60)
				      (debug:print 1 "WARNING: number of jobs " num-running-in-jobgroup 
						   " in jobgroup \"" jobgroup "\" exceeds limit of " job-group-limit))
				  #t)
				 (else #f))))
	  (list (not can-not-run-more) num-running num-running-in-jobgroup max-concurrent-jobs job-group-limit)))))


;;  test-names: Comma separated patterns same as test-patts but used in selection 
;;              of tests to run. The item portions are not respected.
;;              FIXME: error out if /patt specified
;;            
(define (runs:run-tests target runname test-patts user flags #!key (run-count 3)) ;; test-names

  (let* ((keys               (keys:config-get-fields *configdat*))
	 (keyvals            (keys:target->keyval keys target))
	 (run-id             (rmt:register-run keyvals runname "new" "n/a" user))  ;;  test-name)))
	 (deferred          '()) ;; delay running these since they have a waiton clause
	 (runconfigf         (conc  *toppath* "/runconfigs.config"))
	 (test-records       (make-hash-table))
	 ;; need to process runconfigs before generating these lists
	 (all-tests-registry #f)  ;; (tests:get-all)) ;; (tests:get-valid-tests (make-hash-table) test-search-path)) ;; all valid tests to check waiton names
	 (all-test-names     #f)  ;; (hash-table-keys all-tests-registry))
	 (test-names         #f)  ;; (tests:filter-test-names all-test-names test-patts))
	 (required-tests     #f)  ;;(lset-intersection equal? (string-split test-patts ",") test-names))) ;; test-names)) ;; Added test-names as initial for required-tests but that failed to work
	 (task-key           (conc (hash-table->alist flags) " " (get-host-name) " " (current-process-id)))
	 (tasks-db           (tasks:open-db)))


    (set-signal-handler! signal/int
			 (lambda (signum)
			   (signal-mask! signum)
			   (let ((tdb (tasks:open-db)))
			     (tasks:set-state-given-param-key tdb task-key "killed")
			     ;; (sqlite3:interrupt! tdb) ;; seems silly?
			     (sqlite3:finalize! tdb))
			   (print "Killed by signal " signum ". Exiting")
			   (exit)))

    ;; register this run in monitor.db
    (tasks:add tasks-db "run-tests" user target runname test-patts task-key) ;; params)
    (tasks:set-state-given-param-key tasks-db task-key "running")
    (runs:set-megatest-env-vars run-id inkeys: keys inrunname: runname) ;; these may be needed by the launching process
    (if (file-exists? runconfigf)
	(setup-env-defaults runconfigf run-id *already-seen-runconfig-info* keyvals target)
	(debug:print 0 "WARNING: You do not have a run config file: " runconfigf))

    ;; Now generate all the tests lists
    (set! all-tests-registry (tests:get-all))
241
242
243
244
245
246
247



248
249
250
251

252
253





254
255
256
257
258
259
260
    (debug:print-info 0 "all tests:  " (string-intersperse (sort all-test-names string<) " "))
    (debug:print-info 0 "test names: " (string-intersperse (sort test-names string<) " "))

    ;; on the first pass or call to run-tests set FAILS to NOT_STARTED if
    ;; -keepgoing is specified
    (if (eq? *passnum* 0)
	(begin



	  ;; have to delete test records where NOT_STARTED since they can cause -keepgoing to 
	  ;; get stuck due to becoming inaccessible from a failed test. I.e. if test B depends 
	  ;; on test A but test B reached the point on being registered as NOT_STARTED and test
	  ;; A failed for some reason then on re-run using -keepgoing the run can never complete.

	  (cdb:delete-tests-in-state *runremote* run-id "NOT_STARTED")
	  (cdb:remote-run db:set-tests-state-status #f run-id test-names #f "FAIL" "NOT_STARTED" "FAIL")))






    ;; Ensure all tests are registered in the test_meta table
    (runs:update-all-test_meta #f)

    ;; now add non-directly referenced dependencies (i.e. waiton)
    ;;======================================================================
    ;; refactoring this block into tests:get-full-data







>
>
>




>
|
|
>
>
>
>
>







249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
    (debug:print-info 0 "all tests:  " (string-intersperse (sort all-test-names string<) " "))
    (debug:print-info 0 "test names: " (string-intersperse (sort test-names string<) " "))

    ;; on the first pass or call to run-tests set FAILS to NOT_STARTED if
    ;; -keepgoing is specified
    (if (eq? *passnum* 0)
	(begin
	  ;; Is this still necessary? I think not. Unreachable tests are marked as such and 
	  ;; should not cause problems here.
	  ;;
	  ;; have to delete test records where NOT_STARTED since they can cause -keepgoing to 
	  ;; get stuck due to becoming inaccessible from a failed test. I.e. if test B depends 
	  ;; on test A but test B reached the point on being registered as NOT_STARTED and test
	  ;; A failed for some reason then on re-run using -keepgoing the run can never complete.
	  ;;
	  ;; (rmt:general-call 'delete-tests-in-state run-id "NOT_STARTED")
	  
	  ;; Now convert FAIL and anything in allow-auto-rerun to NOT_STARTED
	  ;;
	  (for-each (lambda (state)
		      (rmt:set-tests-state-status run-id test-names state #f "NOT_STARTED" state))
		    (string-split (or (configf:lookup *configdat* "setup" "allow-auto-rerun") "")))))

    ;; Ensure all tests are registered in the test_meta table
    (runs:update-all-test_meta #f)

    ;; now add non-directly referenced dependencies (i.e. waiton)
    ;;======================================================================
    ;; refactoring this block into tests:get-full-data
358
359
360
361
362
363
364

365
366
367
368
369
370
371
372
		  (if (not (hash-table-ref/default flags "-preclean" #f))
		      (hash-table-set! flags "-preclean" #t))
		  (if (not (hash-table-ref/default flags "-rerun" #f))
		      (hash-table-set! flags "-rerun" "STUCK/DEAD,n/a,ZERO_ITEMS"))
		  (runs:run-tests target runname test-patts user flags run-count: (- run-count 1)))))
	  (debug:print-info 0 "No tests to run")))
    (debug:print-info 4 "All done by here")

    ))


;; loop logic. These are used in runs:run-tests-queue to make it a bit more readable.
;;
;; If reg not full and have items in tal then loop with (car tal)(cdr tal) reg reruns
;; If reg is full (i.e. length >= n
;;   loop with (car reg) tal (cdr reg) reruns







>
|







375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
		  (if (not (hash-table-ref/default flags "-preclean" #f))
		      (hash-table-set! flags "-preclean" #t))
		  (if (not (hash-table-ref/default flags "-rerun" #f))
		      (hash-table-set! flags "-rerun" "STUCK/DEAD,n/a,ZERO_ITEMS"))
		  (runs:run-tests target runname test-patts user flags run-count: (- run-count 1)))))
	  (debug:print-info 0 "No tests to run")))
    (debug:print-info 4 "All done by here")
    (tasks:set-state-given-param-key tasks-db task-key "done")
    (sqlite3:finalize! tasks-db)))


;; loop logic. These are used in runs:run-tests-queue to make it a bit more readable.
;;
;; If reg not full and have items in tal then loop with (car tal)(cdr tal) reg reruns
;; If reg is full (i.e. length >= n
;;   loop with (car reg) tal (cdr reg) reruns
404
405
406
407
408
409
410

411
412
413
414
415
416
417
418
	  '()
	  reg)))

(define runs:nothing-left-in-queue-count 0)

(define (runs:expand-items hed tal reg reruns regfull newtal jobgroup max-concurrent-jobs run-id waitons item-path testmode test-record can-run-more items runname tconfig reglen test-registry test-records itemmap)
  (let* ((loop-list       (list hed tal reg reruns))

	 (prereqs-not-met (mt:lazy-get-prereqs-not-met run-id waitons item-path mode: testmode itemmap: itemmap))
	 (fails           (runs:calc-fails prereqs-not-met))
	 (prereq-fails    (runs:calc-prereq-fail prereqs-not-met))
	 (non-completed   (runs:calc-not-completed prereqs-not-met))
	 (runnables       (runs:calc-runnable prereqs-not-met)))
    (debug:print-info 4 "START OF INNER COND #2 "
		      "\n can-run-more:    " can-run-more
		      "\n testname:        " hed







>
|







422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
	  '()
	  reg)))

(define runs:nothing-left-in-queue-count 0)

(define (runs:expand-items hed tal reg reruns regfull newtal jobgroup max-concurrent-jobs run-id waitons item-path testmode test-record can-run-more items runname tconfig reglen test-registry test-records itemmap)
  (let* ((loop-list       (list hed tal reg reruns))
	 (prereqs-not-met (rmt:get-prereqs-not-met run-id waitons item-path testmode itemmap: itemmap))
	 ;; (prereqs-not-met (mt:lazy-get-prereqs-not-met run-id waitons item-path mode: testmode itemmap: itemmap))
	 (fails           (runs:calc-fails prereqs-not-met))
	 (prereq-fails    (runs:calc-prereq-fail prereqs-not-met))
	 (non-completed   (runs:calc-not-completed prereqs-not-met))
	 (runnables       (runs:calc-runnable prereqs-not-met)))
    (debug:print-info 4 "START OF INNER COND #2 "
		      "\n can-run-more:    " can-run-more
		      "\n testname:        " hed
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
	(setenv "MT_TEST_NAME" test-name) ;; 
	(setenv "MT_RUNNAME"   runname)
	(runs:set-megatest-env-vars run-id inrunname: runname) ;; these may be needed by the launching process
	(let ((items-list (items:get-items-from-config tconfig)))
	  (if (list? items-list)
	      (begin
		(if (null? items-list)
		    (let ((test-id (cdb:remote-run db:get-test-id-cached #f run-id test-name "")))
		      (mt:test-set-state-status-by-id test-id "NOT_STARTED" "ZERO_ITEMS" "Failed to run due to failed prerequisites")))
		(tests:testqueue-set-items! test-record items-list)
		(list hed tal reg reruns))
	      (begin
		(debug:print 0 "ERROR: The proc from reading the items table did not yield a list - please report this")
		(exit 1))))))

     ((and (null? fails)







|
|







481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
	(setenv "MT_TEST_NAME" test-name) ;; 
	(setenv "MT_RUNNAME"   runname)
	(runs:set-megatest-env-vars run-id inrunname: runname) ;; these may be needed by the launching process
	(let ((items-list (items:get-items-from-config tconfig)))
	  (if (list? items-list)
	      (begin
		(if (null? items-list)
		    (let ((test-id (rmt:get-test-id run-id test-name "")))
		      (mt:test-set-state-status-by-id run-id test-id "NOT_STARTED" "ZERO_ITEMS" "Failed to run due to failed prerequisites")))
		(tests:testqueue-set-items! test-record items-list)
		(list hed tal reg reruns))
	      (begin
		(debug:print 0 "ERROR: The proc from reading the items table did not yield a list - please report this")
		(exit 1))))))

     ((and (null? fails)
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515

	(if (and give-up
		 (not (and (null? tal)(null? reg))))
	    (let ((trimmed-tal (mt:discard-blocked-tests run-id hed tal test-records))
		  (trimmed-reg (mt:discard-blocked-tests run-id hed reg test-records)))
	      (debug:print 1 "WARNING: test " hed " has discarded prerequisites, removing it from the queue")

	      (let ((test-id (cdb:remote-run db:get-test-id-cached #f run-id hed "")))
		(mt:test-set-state-status-by-id test-id "NOT_STARTED" "PREQ_DISCARDED" "Failed to run due to discarded prerequisites"))
	      
	      (if (and (null? trimmed-tal)
		       (null? trimmed-reg))
		  #f
		  (list (runs:queue-next-hed trimmed-tal trimmed-reg reglen regfull)
			(runs:queue-next-tal trimmed-tal trimmed-reg reglen regfull)
			(runs:queue-next-reg trimmed-tal trimmed-reg reglen regfull)







|
|







519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534

	(if (and give-up
		 (not (and (null? tal)(null? reg))))
	    (let ((trimmed-tal (mt:discard-blocked-tests run-id hed tal test-records))
		  (trimmed-reg (mt:discard-blocked-tests run-id hed reg test-records)))
	      (debug:print 1 "WARNING: test " hed " has discarded prerequisites, removing it from the queue")

	      (let ((test-id (rmt:get-test-id run-id hed "")))
		(mt:test-set-state-status-by-id run-id test-id "NOT_STARTED" "PREQ_DISCARDED" "Failed to run due to discarded prerequisites"))
	      
	      (if (and (null? trimmed-tal)
		       (null? trimmed-reg))
		  #f
		  (list (runs:queue-next-hed trimmed-tal trimmed-reg reglen regfull)
			(runs:queue-next-tal trimmed-tal trimmed-reg reglen regfull)
			(runs:queue-next-reg trimmed-tal trimmed-reg reglen regfull)
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
	    (runs:inc-cant-run-tests hed)
	    (debug:print-info 1 "no fails in prerequisites for " hed " but also none running, keeping " hed " for now. Try count: " (hash-table-ref/default *seen-cant-run-tests* hed 0))
	    ;; num-retries code was here
	    ;; we use this opportunity to move contents of reg to tal
	    (list (car newtal)(append (cdr newtal) reg) '() reruns)) ;; an issue with prereqs not yet met?
	  (begin
	    (debug:print-info 1 "no fails in prerequisites for " hed " but nothing seen running in a while, dropping test " hed " from the run queue")
	    (let ((test-id (cdb:remote-run db:get-test-id-cached #f run-id hed "")))
	      (mt:test-set-state-status-by-id test-id "NOT_STARTED" "TIMED_OUT" "Nothing seen running in a while."))
	    (list (runs:queue-next-hed tal reg reglen regfull)
		  (runs:queue-next-tal tal reg reglen regfull)
		  (runs:queue-next-reg tal reg reglen regfull)
		  reruns))))

     ((and 
       (or (not (null? fails))
	   (not (null? prereq-fails)))
       (member 'normal testmode))
      (debug:print-info 1 "test "  hed " (mode=" testmode ") has failed prerequisite(s); "
			(string-intersperse (map (lambda (t)(conc (db:test-get-testname t) ":" (db:test-get-state t)"/"(db:test-get-status t))) fails) ", ")
			", removing it from to-do list")
      (let ((test-id (cdb:remote-run db:get-test-id-cached #f run-id hed "")))
	(if (not (null? prereq-fails))
	    (mt:test-set-state-status-by-id test-id "NOT_STARTED" "PREQ_DISCARDED" "Failed to run due to prior failed prerequisites")
	    (mt:test-set-state-status-by-id test-id "NOT_STARTED" "PREQ_FAIL"      "Failed to run due to failed prerequisites")))
      (if (or (not (null? reg))(not (null? tal)))
	  (begin
	    (hash-table-set! test-registry hed 'CANNOTRUN)
	    (list (runs:queue-next-hed tal reg reglen regfull)
		  (runs:queue-next-tal tal reg reglen regfull)
		  (runs:queue-next-reg tal reg reglen regfull)
		  (cons hed reruns)))







|
|












|

|
|







543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
	    (runs:inc-cant-run-tests hed)
	    (debug:print-info 1 "no fails in prerequisites for " hed " but also none running, keeping " hed " for now. Try count: " (hash-table-ref/default *seen-cant-run-tests* hed 0))
	    ;; num-retries code was here
	    ;; we use this opportunity to move contents of reg to tal
	    (list (car newtal)(append (cdr newtal) reg) '() reruns)) ;; an issue with prereqs not yet met?
	  (begin
	    (debug:print-info 1 "no fails in prerequisites for " hed " but nothing seen running in a while, dropping test " hed " from the run queue")
	    (let ((test-id (rmt:get-test-id run-id hed "")))
	      (mt:test-set-state-status-by-id run-id test-id "NOT_STARTED" "TIMED_OUT" "Nothing seen running in a while."))
	    (list (runs:queue-next-hed tal reg reglen regfull)
		  (runs:queue-next-tal tal reg reglen regfull)
		  (runs:queue-next-reg tal reg reglen regfull)
		  reruns))))

     ((and 
       (or (not (null? fails))
	   (not (null? prereq-fails)))
       (member 'normal testmode))
      (debug:print-info 1 "test "  hed " (mode=" testmode ") has failed prerequisite(s); "
			(string-intersperse (map (lambda (t)(conc (db:test-get-testname t) ":" (db:test-get-state t)"/"(db:test-get-status t))) fails) ", ")
			", removing it from to-do list")
      (let ((test-id (rmt:get-test-id run-id hed "")))
	(if (not (null? prereq-fails))
	    (mt:test-set-state-status-by-id run-id test-id "NOT_STARTED" "PREQ_DISCARDED" "Failed to run due to prior failed prerequisites")
	    (mt:test-set-state-status-by-id run-id test-id "NOT_STARTED" "PREQ_FAIL"      "Failed to run due to failed prerequisites")))
      (if (or (not (null? reg))(not (null? tal)))
	  (begin
	    (hash-table-set! test-registry hed 'CANNOTRUN)
	    (list (runs:queue-next-hed tal reg reglen regfull)
		  (runs:queue-next-tal tal reg reglen regfull)
		  (runs:queue-next-reg tal reg reglen regfull)
		  (cons hed reruns)))
582
583
584
585
586
587
588
589
590
591
592
593
594

595
596
597
598
599
600
601
602
	      ((string? t)
	       t)
	      (else 
	       (conc t))))
	   inlst)))

(define (runs:process-expanded-tests hed tal reg reruns reglen regfull test-record runname test-name item-path jobgroup max-concurrent-jobs run-id waitons item-path testmode test-patts required-tests test-registry registry-mutex flags keyvals run-info newtal all-tests-registry itemmap)
  (let* ((run-limits-info         (runs:can-run-more-tests jobgroup max-concurrent-jobs)) ;; look at the test jobgroup and tot jobs running
	 (have-resources          (car run-limits-info))
	 (num-running             (list-ref run-limits-info 1))
	 (num-running-in-jobgroup (list-ref run-limits-info 2)) 
	 (max-concurrent-jobs     (list-ref run-limits-info 3))
	 (job-group-limit         (list-ref run-limits-info 4))

	 (prereqs-not-met         (mt:lazy-get-prereqs-not-met run-id waitons item-path mode: testmode itemmap: itemmap))
	 (fails                   (runs:calc-fails prereqs-not-met))
	 (non-completed           (runs:calc-not-completed prereqs-not-met))
	 (loop-list               (list hed tal reg reruns))
	 ;; configure the load runner
	 (numcpus                 (common:get-num-cpus))
	 (maxload                 (string->number (or (configf:lookup *configdat* "jobtools" "maxload") "3")))
	 (waitdelay               (string->number (or (configf:lookup *configdat* "jobtools" "waitdelay") "60"))))







|





>
|







601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
	      ((string? t)
	       t)
	      (else 
	       (conc t))))
	   inlst)))

(define (runs:process-expanded-tests hed tal reg reruns reglen regfull test-record runname test-name item-path jobgroup max-concurrent-jobs run-id waitons item-path testmode test-patts required-tests test-registry registry-mutex flags keyvals run-info newtal all-tests-registry itemmap)
  (let* ((run-limits-info         (runs:can-run-more-tests run-id jobgroup max-concurrent-jobs)) ;; look at the test jobgroup and tot jobs running
	 (have-resources          (car run-limits-info))
	 (num-running             (list-ref run-limits-info 1))
	 (num-running-in-jobgroup (list-ref run-limits-info 2)) 
	 (max-concurrent-jobs     (list-ref run-limits-info 3))
	 (job-group-limit         (list-ref run-limits-info 4))
	 (prereqs-not-met         (rmt:get-prereqs-not-met run-id waitons item-path testmode itemmap: itemmap))
	 ;; (prereqs-not-met         (mt:lazy-get-prereqs-not-met run-id waitons item-path mode: testmode itemmap: itemmap))
	 (fails                   (runs:calc-fails prereqs-not-met))
	 (non-completed           (runs:calc-not-completed prereqs-not-met))
	 (loop-list               (list hed tal reg reruns))
	 ;; configure the load runner
	 (numcpus                 (common:get-num-cpus))
	 (maxload                 (string->number (or (configf:lookup *configdat* "jobtools" "maxload") "3")))
	 (waitdelay               (string->number (or (configf:lookup *configdat* "jobtools" "waitdelay") "60"))))
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
     
     ;; Register tests 
     ;;
     ((not (hash-table-ref/default test-registry (runs:make-full-test-name test-name item-path) #f))
      (debug:print-info 4 "Pre-registering test " test-name "/" item-path " to create placeholder" )
      (if (eq? *transport-type* 'fs) ;; no point in parallel registration if use fs
	  (begin
	    (cdb:tests-register-test *runremote* run-id test-name item-path)
	    (hash-table-set! test-registry (runs:make-full-test-name test-name item-path) 'done))
	  (let ((th (make-thread (lambda ()
				   (mutex-lock! registry-mutex)
				   (hash-table-set! test-registry (runs:make-full-test-name test-name item-path) 'start)
				   (mutex-unlock! registry-mutex)
				   ;; If haven't done it before register a top level test if this is an itemized test
				   (if (not (eq? (hash-table-ref/default test-registry (runs:make-full-test-name test-name "") #f) 'done))
				       (cdb:tests-register-test *runremote* run-id test-name ""))
				   (cdb:tests-register-test *runremote* run-id test-name item-path)
				   (mutex-lock! registry-mutex)
				   (hash-table-set! test-registry (runs:make-full-test-name test-name item-path) 'done)
				   (mutex-unlock! registry-mutex))
				 (conc test-name "/" item-path))))
	    (thread-start! th)))
      (runs:shrink-can-run-more-tests-count)   ;; DELAY TWEAKER (still needed?)
      (if (and (null? tal)(null? reg))







|







|
|







653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
     
     ;; Register tests 
     ;;
     ((not (hash-table-ref/default test-registry (runs:make-full-test-name test-name item-path) #f))
      (debug:print-info 4 "Pre-registering test " test-name "/" item-path " to create placeholder" )
      (if (eq? *transport-type* 'fs) ;; no point in parallel registration if use fs
	  (begin
	    (rmt:general-call 'register-test run-id run-id test-name item-path)
	    (hash-table-set! test-registry (runs:make-full-test-name test-name item-path) 'done))
	  (let ((th (make-thread (lambda ()
				   (mutex-lock! registry-mutex)
				   (hash-table-set! test-registry (runs:make-full-test-name test-name item-path) 'start)
				   (mutex-unlock! registry-mutex)
				   ;; If haven't done it before register a top level test if this is an itemized test
				   (if (not (eq? (hash-table-ref/default test-registry (runs:make-full-test-name test-name "") #f) 'done))
				       (rmt:general-call 'register-test run-id run-id test-name ""))
				   (rmt:general-call 'register-test run-id run-id test-name item-path)
				   (mutex-lock! registry-mutex)
				   (hash-table-set! test-registry (runs:make-full-test-name test-name item-path) 'done)
				   (mutex-unlock! registry-mutex))
				 (conc test-name "/" item-path))))
	    (thread-start! th)))
      (runs:shrink-can-run-more-tests-count)   ;; DELAY TWEAKER (still needed?)
      (if (and (null? tal)(null? reg))
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
	    (list (car newtal)(cdr newtal) reg reruns))
	  ;; the waiton is FAIL so no point in trying to run hed ever again
	  (if (or (not (null? reg))(not (null? tal)))
	      (if (vector? hed)
		  (begin
		    (debug:print 1 "WARNING: Dropping test " test-name "/" item-path
				 " from the launch list as it has prerequistes that are FAIL")
		    (let ((test-id (cdb:remote-run db:get-test-id-cached #f run-id hed "")))
		      (mt:test-set-state-status-by-id test-id "NOT_STARTED" "PREQ_FAIL" "Failed to run due to failed prerequisites"))
		    (runs:shrink-can-run-more-tests-count) ;; DELAY TWEAKER (still needed?)
		    ;; (thread-sleep! *global-delta*)
		    ;; This next is for the items
		    (mt:test-set-state-status-by-testname run-id test-name item-path "NOT_STARTED" "BLOCKED" #f)
		    (hash-table-set! test-registry (runs:make-full-test-name test-name item-path) 'removed)
		    (list (runs:queue-next-hed tal reg reglen regfull)
			  (runs:queue-next-tal tal reg reglen regfull)







|
|







754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
	    (list (car newtal)(cdr newtal) reg reruns))
	  ;; the waiton is FAIL so no point in trying to run hed ever again
	  (if (or (not (null? reg))(not (null? tal)))
	      (if (vector? hed)
		  (begin
		    (debug:print 1 "WARNING: Dropping test " test-name "/" item-path
				 " from the launch list as it has prerequistes that are FAIL")
		    (let ((test-id (rmt:get-test-id run-id hed "")))
		      (mt:test-set-state-status-by-id run-id test-id "NOT_STARTED" "PREQ_FAIL" "Failed to run due to failed prerequisites"))
		    (runs:shrink-can-run-more-tests-count) ;; DELAY TWEAKER (still needed?)
		    ;; (thread-sleep! *global-delta*)
		    ;; This next is for the items
		    (mt:test-set-state-status-by-testname run-id test-name item-path "NOT_STARTED" "BLOCKED" #f)
		    (hash-table-set! test-registry (runs:make-full-test-name test-name item-path) 'removed)
		    (list (runs:queue-next-hed tal reg reglen regfull)
			  (runs:queue-next-tal tal reg reglen regfull)
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
  ;; NB// Should expand items here and then insert into the run queue.
  (debug:print 5 "test-records: " test-records ", flags: " (hash-table->alist flags))

  ;; Do mark-and-find clean up of db before starting runing of quue
  ;;
  ;; (cdb:remote-run db:find-and-mark-incomplete #f)

  (let ((run-info              (cdb:remote-run db:get-run-info #f run-id))
	(tests-info            (mt:get-tests-for-run run-id #f '() '())) ;;  qryvals: "id,testname,item_path"))
	(sorted-test-names     (tests:sort-by-priority-and-waiton test-records))
	(test-registry         (make-hash-table))
	(registry-mutex        (make-mutex))
	(num-retries           0)
	(max-retries           (config-lookup *configdat* "setup" "maxretries"))
	(max-concurrent-jobs   (let ((mcj (config-lookup *configdat* "setup"     "max_concurrent_jobs")))







|







859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
  ;; NB// Should expand items here and then insert into the run queue.
  (debug:print 5 "test-records: " test-records ", flags: " (hash-table->alist flags))

  ;; Do mark-and-find clean up of db before starting runing of quue
  ;;
  ;; (cdb:remote-run db:find-and-mark-incomplete #f)

  (let ((run-info              (rmt:get-run-info run-id))
	(tests-info            (mt:get-tests-for-run run-id #f '() '())) ;;  qryvals: "id,testname,item_path"))
	(sorted-test-names     (tests:sort-by-priority-and-waiton test-records))
	(test-registry         (make-hash-table))
	(registry-mutex        (make-mutex))
	(num-retries           0)
	(max-retries           (config-lookup *configdat* "setup" "maxretries"))
	(max-concurrent-jobs   (let ((mcj (config-lookup *configdat* "setup"     "max_concurrent_jobs")))
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922

      (if (not (null? reruns))(debug:print-info 4 "reruns=" reruns))

      ;; Here we mark any old defunct tests as incomplete. Do this every fifteen minutes
      (if (> (current-seconds)(+ last-time-incomplete 900))
          (begin
            (set! last-time-incomplete (current-seconds))
            (cdb:remote-run db:find-and-mark-incomplete #f)))

      ;; (print "Top of loop, hed=" hed ", tal=" tal " ,reruns=" reruns)
      (let* ((test-record (hash-table-ref test-records hed))
	     (test-name   (tests:testqueue-get-testname test-record))
	     (tconfig     (tests:testqueue-get-testconfig test-record))
	     (jobgroup    (config-lookup tconfig "test_meta" "jobgroup"))
	     (testmode    (let ((m (config-lookup tconfig "requirements" "mode")))
			    (if m (map string->symbol (string-split m)) '(normal))))
	     (itemmap     (configf:lookup tconfig "requirements" "itemmap"))
	     (waitons     (tests:testqueue-get-waitons    test-record))
	     (priority    (tests:testqueue-get-priority   test-record))
	     (itemdat     (tests:testqueue-get-itemdat    test-record)) ;; itemdat can be a string, list or #f
	     (items       (tests:testqueue-get-items      test-record))
	     (item-path   (item-list->path itemdat))
	     (tfullname   (runs:make-full-test-name test-name item-path))
	     (newtal      (append tal (list hed)))
	     (regfull     (>= (length reg) reglen))
	     (num-running (cdb:remote-run db:get-count-tests-running-for-run-id #f run-id #f)))

      (if (> num-running 0)
	  (set! last-time-some-running (current-seconds)))

      (if (> (current-seconds)(+ last-time-some-running 240))
	  (hash-table-set! *max-tries-hash* tfullname (+ (hash-table-ref/default *max-tries-hash* tfullname 0) 1)))
	;; (debug:print 0 "max-tries-hash: " (hash-table->alist *max-tries-hash*))

	;; Ensure all top level tests get registered. This way they show up as "NOT_STARTED" on the dashboard
	;; and it is clear they *should* have run but did not.
	(if (not (hash-table-ref/default test-registry (runs:make-full-test-name test-name "") #f))
	    (begin
	      (cdb:tests-register-test *runremote* run-id test-name "")
	      (hash-table-set! test-registry (runs:make-full-test-name test-name "") 'done)))
	
	;; Fast skip of tests that are already "COMPLETED" - NO! Cannot do that as the items may not have been expanded yet :(
	;;
	(if (member (hash-table-ref/default test-registry tfullname #f) 
		    '(DONOTRUN removed)) ;; *common:cant-run-states-sym*) ;; '(COMPLETED KILLED WAIVED UNKNOWN INCOMPLETE))
	    (begin







|

















|












|







897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942

      (if (not (null? reruns))(debug:print-info 4 "reruns=" reruns))

      ;; Here we mark any old defunct tests as incomplete. Do this every fifteen minutes
      (if (> (current-seconds)(+ last-time-incomplete 900))
          (begin
            (set! last-time-incomplete (current-seconds))
            (rmt:find-and-mark-incomplete-all-runs)))

      ;; (print "Top of loop, hed=" hed ", tal=" tal " ,reruns=" reruns)
      (let* ((test-record (hash-table-ref test-records hed))
	     (test-name   (tests:testqueue-get-testname test-record))
	     (tconfig     (tests:testqueue-get-testconfig test-record))
	     (jobgroup    (config-lookup tconfig "test_meta" "jobgroup"))
	     (testmode    (let ((m (config-lookup tconfig "requirements" "mode")))
			    (if m (map string->symbol (string-split m)) '(normal))))
	     (itemmap     (configf:lookup tconfig "requirements" "itemmap"))
	     (waitons     (tests:testqueue-get-waitons    test-record))
	     (priority    (tests:testqueue-get-priority   test-record))
	     (itemdat     (tests:testqueue-get-itemdat    test-record)) ;; itemdat can be a string, list or #f
	     (items       (tests:testqueue-get-items      test-record))
	     (item-path   (item-list->path itemdat))
	     (tfullname   (runs:make-full-test-name test-name item-path))
	     (newtal      (append tal (list hed)))
	     (regfull     (>= (length reg) reglen))
	     (num-running (rmt:get-count-tests-running-for-run-id run-id)))

      (if (> num-running 0)
	  (set! last-time-some-running (current-seconds)))

      (if (> (current-seconds)(+ last-time-some-running 240))
	  (hash-table-set! *max-tries-hash* tfullname (+ (hash-table-ref/default *max-tries-hash* tfullname 0) 1)))
	;; (debug:print 0 "max-tries-hash: " (hash-table->alist *max-tries-hash*))

	;; Ensure all top level tests get registered. This way they show up as "NOT_STARTED" on the dashboard
	;; and it is clear they *should* have run but did not.
	(if (not (hash-table-ref/default test-registry (runs:make-full-test-name test-name "") #f))
	    (begin
	      (rmt:general-call 'register-test run-id run-id test-name "")
	      (hash-table-set! test-registry (runs:make-full-test-name test-name "") 'done)))
	
	;; Fast skip of tests that are already "COMPLETED" - NO! Cannot do that as the items may not have been expanded yet :(
	;;
	(if (member (hash-table-ref/default test-registry tfullname #f) 
		    '(DONOTRUN removed)) ;; *common:cant-run-states-sym*) ;; '(COMPLETED KILLED WAIVED UNKNOWN INCOMPLETE))
	    (begin
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
	      #f
	      (loop (car tal)(cdr tal) reg reruns)))
	    
	 ;; if items is a proc then need to run items:get-items-from-config, get the list and loop 
	 ;;    - but only do that if resources exist to kick off the job
	 ;; EXPAND ITEMS
	 ((or (procedure? items)(eq? items 'have-procedure))
	  (let ((can-run-more    (runs:can-run-more-tests jobgroup max-concurrent-jobs)))
	    (if (and (list? can-run-more)
		     (car can-run-more))
		(let ((loop-list (runs:expand-items hed tal reg reruns regfull newtal jobgroup max-concurrent-jobs run-id waitons item-path testmode test-record can-run-more items runname tconfig reglen test-registry test-records itemmap)))
		  (if loop-list
		      (apply loop loop-list)))
		;; if can't run more just loop with next possible test
		(loop (car newtal)(cdr newtal) reg reruns))))







|







1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
	      #f
	      (loop (car tal)(cdr tal) reg reruns)))
	    
	 ;; if items is a proc then need to run items:get-items-from-config, get the list and loop 
	 ;;    - but only do that if resources exist to kick off the job
	 ;; EXPAND ITEMS
	 ((or (procedure? items)(eq? items 'have-procedure))
	  (let ((can-run-more    (runs:can-run-more-tests run-id jobgroup max-concurrent-jobs)))
	    (if (and (list? can-run-more)
		     (car can-run-more))
		(let ((loop-list (runs:expand-items hed tal reg reruns regfull newtal jobgroup max-concurrent-jobs run-id waitons item-path testmode test-record can-run-more items runname tconfig reglen test-registry test-records itemmap)))
		  (if loop-list
		      (apply loop loop-list)))
		;; if can't run more just loop with next possible test
		(loop (car newtal)(cdr newtal) reg reruns))))
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088

1089
1090
1091
1092
1093
1094
1095
	 ((not (null? reg)) ;; could we get here with leftovers?
	  (debug:print-info 0 "Have leftovers!")
	  (loop (car reg)(cdr reg) '() reruns))
	 (else
	  (debug:print-info 4 "Exiting loop with...\n  hed=" hed "\n  tal=" tal "\n  reruns=" reruns))
	 )))
    ;; now *if* -run-wait we wait for all tests to be done
    
    ;; if run-wait mode then wait 15 seconds for db to stabilize
    (if (or (args:get-arg "-run-wait")
	    (equal? (configf:lookup *configdat* "setup" "run-wait") "yes"))
	(thread-sleep! 15))
    ;; Now wait for any RUNNING tests to complete (if in run-wait mode)
    (let wait-loop ((num-running      (cdb:remote-run db:get-count-tests-running-for-run-id #f run-id #f))
		    (prev-num-running 0))
      ;; (debug:print 0 "num-running=" num-running ", prev-num-running=" prev-num-running)
      (if (and (or (args:get-arg "-run-wait")
		   (equal? (configf:lookup *configdat* "setup" "run-wait") "yes"))
	       (> num-running 0))
	  (begin
	    ;; Here we mark any old defunct tests as incomplete. Do this every fifteen minutes
	    ;; (debug:print 0 "Got here eh! num-running=" num-running " (> num-running 0) " (> num-running 0))
	    (if (> (current-seconds)(+ last-time-incomplete 900))
		(begin
		  (debug:print-info 0 "Marking stuck tests as INCOMPLETE while waiting for run " run-id ". Running as pid " (current-process-id) " on " (get-host-name))
		  (set! last-time-incomplete (current-seconds))
		  (cdb:remote-run db:find-and-mark-incomplete #f)))
	    (if (not (eq? num-running prev-num-running))
		(debug:print-info 0 "run-wait specified, waiting on " num-running " tests in RUNNING, REMOTEHOSTSTART or LAUNCHED state at " (time->string (seconds->local-time (current-seconds)))))
	    (thread-sleep! 15)
	    (wait-loop (cdb:remote-run db:get-count-tests-running-for-run-id #f run-id #f) num-running))))

    ;; LET* ((test-record
    ;; we get here on "drop through". All done!
    (debug:print-info 1 "All tests launched")))

(define (runs:calc-fails prereqs-not-met)
  (filter (lambda (test)
	    (and (vector? test) ;; not (string? test))







<
<
<
<
<

|












|



|
>







1078
1079
1080
1081
1082
1083
1084





1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
	 ((not (null? reg)) ;; could we get here with leftovers?
	  (debug:print-info 0 "Have leftovers!")
	  (loop (car reg)(cdr reg) '() reruns))
	 (else
	  (debug:print-info 4 "Exiting loop with...\n  hed=" hed "\n  tal=" tal "\n  reruns=" reruns))
	 )))
    ;; now *if* -run-wait we wait for all tests to be done





    ;; Now wait for any RUNNING tests to complete (if in run-wait mode)
    (let wait-loop ((num-running      (rmt:get-count-tests-running-for-run-id run-id))
		    (prev-num-running 0))
      ;; (debug:print 0 "num-running=" num-running ", prev-num-running=" prev-num-running)
      (if (and (or (args:get-arg "-run-wait")
		   (equal? (configf:lookup *configdat* "setup" "run-wait") "yes"))
	       (> num-running 0))
	  (begin
	    ;; Here we mark any old defunct tests as incomplete. Do this every fifteen minutes
	    ;; (debug:print 0 "Got here eh! num-running=" num-running " (> num-running 0) " (> num-running 0))
	    (if (> (current-seconds)(+ last-time-incomplete 900))
		(begin
		  (debug:print-info 0 "Marking stuck tests as INCOMPLETE while waiting for run " run-id ". Running as pid " (current-process-id) " on " (get-host-name))
		  (set! last-time-incomplete (current-seconds))
		  (rmt:find-and-mark-incomplete run-id #f)))
	    (if (not (eq? num-running prev-num-running))
		(debug:print-info 0 "run-wait specified, waiting on " num-running " tests in RUNNING, REMOTEHOSTSTART or LAUNCHED state at " (time->string (seconds->local-time (current-seconds)))))
	    (thread-sleep! 15)
	    ;; (wait-loop (rmt:get-count-tests-running-for-run-id run-id) num-running))))
	    (wait-loop (rmt:get-count-tests-running-for-run-id run-id) num-running))))
    ;; LET* ((test-record
    ;; we get here on "drop through". All done!
    (debug:print-info 1 "All tests launched")))

(define (runs:calc-fails prereqs-not-met)
  (filter (lambda (test)
	    (and (vector? test) ;; not (string? test))
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
    (if (not (hash-table-ref/default *test-meta-updated* test-name #f))
        (begin
	   (hash-table-set! *test-meta-updated* test-name #t)
           (runs:update-test_meta test-name test-conf)))
    
    ;; itemdat => ((ripeness "overripe") (temperature "cool") (season "summer"))
    (let* ((new-test-path (string-intersperse (cons test-path (map cadr itemdat)) "/"))
	   (test-id       (cdb:remote-run db:get-test-id-cached #f  run-id test-name item-path))
	   (testdat       (if test-id (cdb:get-test-info-by-id *runremote* test-id) #f)))
      (if (not testdat)
	  (let loop ()
	    ;; ensure that the path exists before registering the test
	    ;; NOPE: Cannot! Don't know yet which disk area will be assigned....
	    ;; (system (conc "mkdir -p " new-test-path))
	    ;;
	    ;; (open-run-close tests:register-test db run-id test-name item-path)
	    ;;
	    ;; NB// for the above line. I want the test to be registered long before this routine gets called!
	    ;;
	    (if (not test-id)(set! test-id (cdb:remote-run db:get-test-id-cached #f run-id test-name item-path)))
	    (if (not test-id)
		(begin
		  (debug:print 2 "WARN: Test not pre-created? test-name=" test-name ", item-path=" item-path ", run-id=" run-id)
		  (cdb:tests-register-test *runremote* run-id test-name item-path)
		  (set! test-id (cdb:remote-run db:get-test-id-cached #f run-id test-name item-path))))
	    (debug:print-info 4 "test-id=" test-id ", run-id=" run-id ", test-name=" test-name ", item-path=\"" item-path "\"")
	    (set! testdat (cdb:get-test-info-by-id *runremote* test-id))
	    (if (not testdat)
		(begin
		  (debug:print-info 0 "WARNING: server is overloaded, trying again in one second")
		  (thread-sleep! 1)
		  (loop)))))
      (if (not testdat) ;; should NOT happen
	  (debug:print 0 "ERROR: failed to get test record for test-id " test-id))







|
|










|



|
|

|







1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
    (if (not (hash-table-ref/default *test-meta-updated* test-name #f))
        (begin
	   (hash-table-set! *test-meta-updated* test-name #t)
           (runs:update-test_meta test-name test-conf)))
    
    ;; itemdat => ((ripeness "overripe") (temperature "cool") (season "summer"))
    (let* ((new-test-path (string-intersperse (cons test-path (map cadr itemdat)) "/"))
	   (test-id       (rmt:get-test-id run-id test-name item-path))
	   (testdat       (if test-id (rmt:get-test-info-by-id run-id test-id) #f)))
      (if (not testdat)
	  (let loop ()
	    ;; ensure that the path exists before registering the test
	    ;; NOPE: Cannot! Don't know yet which disk area will be assigned....
	    ;; (system (conc "mkdir -p " new-test-path))
	    ;;
	    ;; (open-run-close tests:register-test db run-id test-name item-path)
	    ;;
	    ;; NB// for the above line. I want the test to be registered long before this routine gets called!
	    ;;
	    (if (not test-id)(set! test-id (rmt:get-test-id run-id test-name item-path)))
	    (if (not test-id)
		(begin
		  (debug:print 2 "WARN: Test not pre-created? test-name=" test-name ", item-path=" item-path ", run-id=" run-id)
		  (rmt:general-call 'register-test run-id run-id test-name item-path)
		  (set! test-id (rmt:get-test-id run-id test-name item-path))))
	    (debug:print-info 4 "test-id=" test-id ", run-id=" run-id ", test-name=" test-name ", item-path=\"" item-path "\"")
	    (set! testdat (rmt:get-test-info-by-id run-id test-id))
	    (if (not testdat)
		(begin
		  (debug:print-info 0 "WARNING: server is overloaded, trying again in one second")
		  (thread-sleep! 1)
		  (loop)))))
      (if (not testdat) ;; should NOT happen
	  (debug:print 0 "ERROR: failed to get test record for test-id " test-id))
1271
1272
1273
1274
1275
1276
1277

1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297

1298
1299
1300
1301
1302
1303

1304
1305
1306
1307
1308
1309
1310
1311
1312
	       (let ((skip-test   #f)
		     (skip-check  (configf:get-section test-conf "skip")))
		 (cond 
		  ;; Have to check for skip conditions. This one skips if there are same-named tests
		  ;; currently running
		  ((and skip-check
			(configf:lookup test-conf "skip" "prevrunning"))

		   (let ((running-tests (cdb:remote-run db:get-tests-for-runs-mindata #f #f full-test-name '("RUNNING" "REMOTEHOSTSTART" "LAUNCHED") '() #f)))
		     (if (not (null? running-tests)) ;; have to skip 
			 (set! skip-test "Skipping due to previous tests running"))))
		  ((and skip-check
			(configf:lookup test-conf "skip" "fileexists"))
		   (if (file-exists? (configf:lookup test-conf "skip" "fileexists"))
		       (set! skip-test (conc "Skipping due to existance of file " (configf:lookup test-conf "skip" "fileexists"))))))
		 (if skip-test
		     (begin
		       (mt:test-set-state-status-by-id test-id "COMPLETED" "SKIP" skip-test)
		       (debug:print-info 1 "SKIPPING Test " full-test-name " due to " skip-test))
		     (if (not (launch-test test-id run-id run-info keyvals runname test-conf test-name test-path itemdat flags))
			 (begin
			   (print "ERROR: Failed to launch the test. Exiting as soon as possible")
			   (set! *globalexitstatus* 1) ;; 
			   (process-signal (current-process-id) signal/kill))))))))
	((KILLED) 
	 (debug:print 1 "NOTE: " full-test-name " is already running or was explictly killed, use -force to launch it.")
	 (hash-table-set! test-registry (runs:make-full-test-name test-name test-path) 'DONOTRUN)) ;; KILLED))
	((LAUNCHED REMOTEHOSTSTART RUNNING)  

	 (if (> (- (current-seconds)(+ (db:test-get-event_time testdat)
				       (db:test-get-run_duration testdat)))
		(or incomplete-timeout
		    6000)) ;; i.e. no update for more than 6000 seconds
	     (begin
	       (debug:print 0 "WARNING: Test " test-name " appears to be dead. Forcing it to state INCOMPLETE and status STUCK/DEAD")

	       (tests:test-set-status! test-id "INCOMPLETE" "STUCK/DEAD" "" #f))
	     (debug:print 2 "NOTE: " test-name " is already running")))
	(else      
	 (debug:print 0 "ERROR: Failed to launch test " full-test-name ". Unrecognised state " (test:get-state testdat))
	 (case (string->symbol (test:get-state testdat)) 
	   ((COMPLETED INCOMPLETE)
	    (hash-table-set! test-registry (runs:make-full-test-name test-name test-path) 'DONOTRUN))
	   (else
	    (hash-table-set! test-registry (runs:make-full-test-name test-name test-path) 'DONOTRUN))))))))







>
|








|










>
|
|
|
|
|
|
>
|
|







1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
	       (let ((skip-test   #f)
		     (skip-check  (configf:get-section test-conf "skip")))
		 (cond 
		  ;; Have to check for skip conditions. This one skips if there are same-named tests
		  ;; currently running
		  ((and skip-check
			(configf:lookup test-conf "skip" "prevrunning"))
		   ;; run-ids = #f means *all* runs
		   (let ((running-tests (rmt:get-tests-for-runs-mindata #f full-test-name '("RUNNING" "REMOTEHOSTSTART" "LAUNCHED") '() #f)))
		     (if (not (null? running-tests)) ;; have to skip 
			 (set! skip-test "Skipping due to previous tests running"))))
		  ((and skip-check
			(configf:lookup test-conf "skip" "fileexists"))
		   (if (file-exists? (configf:lookup test-conf "skip" "fileexists"))
		       (set! skip-test (conc "Skipping due to existance of file " (configf:lookup test-conf "skip" "fileexists"))))))
		 (if skip-test
		     (begin
		       (mt:test-set-state-status-by-id run-id test-id "COMPLETED" "SKIP" skip-test)
		       (debug:print-info 1 "SKIPPING Test " full-test-name " due to " skip-test))
		     (if (not (launch-test test-id run-id run-info keyvals runname test-conf test-name test-path itemdat flags))
			 (begin
			   (print "ERROR: Failed to launch the test. Exiting as soon as possible")
			   (set! *globalexitstatus* 1) ;; 
			   (process-signal (current-process-id) signal/kill))))))))
	((KILLED) 
	 (debug:print 1 "NOTE: " full-test-name " is already running or was explictly killed, use -force to launch it.")
	 (hash-table-set! test-registry (runs:make-full-test-name test-name test-path) 'DONOTRUN)) ;; KILLED))
	((LAUNCHED REMOTEHOSTSTART RUNNING)  
	 (debug:print 2 "NOTE: " test-name " is already running"))
	;; (if (> (- (current-seconds)(+ (db:test-get-event_time testdat)
	;; 			       (db:test-get-run_duration testdat)))
	;; 	(or incomplete-timeout
	;; 	    6000)) ;; i.e. no update for more than 6000 seconds
	;;      (begin
	;;        (debug:print 0 "WARNING: Test " test-name " appears to be dead. Forcing it to state INCOMPLETE and status STUCK/DEAD")
	;;        (tests:test-set-status! run-id test-id "INCOMPLETE" "STUCK/DEAD" "" #f))
	;;        ;; (tests:test-set-status! test-id "INCOMPLETE" "STUCK/DEAD" "" #f))
	;;      (debug:print 2 "NOTE: " test-name " is already running")))
	(else      
	 (debug:print 0 "ERROR: Failed to launch test " full-test-name ". Unrecognised state " (test:get-state testdat))
	 (case (string->symbol (test:get-state testdat)) 
	   ((COMPLETED INCOMPLETE)
	    (hash-table-set! test-registry (runs:make-full-test-name test-name test-path) 'DONOTRUN))
	   (else
	    (hash-table-set! test-registry (runs:make-full-test-name test-name test-path) 'DONOTRUN))))))))
1356
1357
1358
1359
1360
1361
1362

1363
1364
1365
1366
1367
1368
1369
1370
;;    'set-state-status
;;
;; NB// should pass in keys?
;;
(define (runs:operate-on action target runnamepatt testpatt #!key (state #f)(status #f)(new-state-status #f)(remove-data-only #f))
  (common:clear-caches) ;; clear all caches
  (let* ((db           #f)

	 (keys         (cdb:remote-run db:get-keys db))
	 (rundat       (mt:get-runs-by-patt keys runnamepatt target))
	 (header       (vector-ref rundat 0))
	 (runs         (vector-ref rundat 1))
	 (states       (if state  (string-split state  ",") '()))
	 (statuses     (if status (string-split status ",") '()))
	 (state-status (if (string? new-state-status) (string-split new-state-status ",") '(#f #f))))
    (debug:print-info 4 "runs:operate-on => Header: " header " action: " action " new-state-status: " new-state-status)







>
|







1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
;;    'set-state-status
;;
;; NB// should pass in keys?
;;
(define (runs:operate-on action target runnamepatt testpatt #!key (state #f)(status #f)(new-state-status #f)(remove-data-only #f))
  (common:clear-caches) ;; clear all caches
  (let* ((db           #f)
	 (tasks-db     (tasks:open-db))
	 (keys         (rmt:get-keys))
	 (rundat       (mt:get-runs-by-patt keys runnamepatt target))
	 (header       (vector-ref rundat 0))
	 (runs         (vector-ref rundat 1))
	 (states       (if state  (string-split state  ",") '()))
	 (statuses     (if status (string-split status ",") '()))
	 (state-status (if (string? new-state-status) (string-split new-state-status ",") '(#f #f))))
    (debug:print-info 4 "runs:operate-on => Header: " header " action: " action " new-state-status: " new-state-status)
1382
1383
1384
1385
1386
1387
1388

1389
1390
1391
1392
1393
1394
1395
1396
1397




1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408


1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426



1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
						    testpatt states statuses
						    not-in:  #f
						    sort-by: (case action
							       ((remove-runs) 'rundir)
							       (else          'event_time))))))
	 (let* ((run-id    (db:get-value-by-header run header "id"))
		(run-state (db:get-value-by-header run header "state"))

		(tests     (if (not (equal? run-state "locked"))
			       (proc-get-tests run-id)
			       '()))
		(lasttpath "/does/not/exist/I/hope"))
	   (debug:print-info 4 "runs:operate-on run=" run ", header=" header)
	   (if (not (null? tests))
	       (begin
		 (case action
		   ((remove-runs)




		    (debug:print 1 "Removing tests for run: " runkey " " (db:get-value-by-header run header "runname")))
		   ((set-state-status)
		    (debug:print 1 "Modifying state and staus for tests for run: " runkey " " (db:get-value-by-header run header "runname")))
		   ((print-run)
		    (debug:print 1 "Printing info for run " runkey ", run=" run ", tests=" tests ", header=" header)
		    action)
		   ((run-wait)
		    (debug:print 1 "Waiting for run " runkey ", run=" runnamepatt " to complete"))
		   (else
		    (debug:print-info 0 "action not recognised " action)))
		 (let ((sorted-tests     (sort tests (lambda (a b)(let ((dira (db:test-get-rundir a))


									(dirb (db:test-get-rundir b)))
								    (if (and (string? dira)(string? dirb))
									(> (string-length dira)(string-length dirb))
									#f)))))
		       (toplevel-retries (make-hash-table)) ;; try three times to loop through and remove top level tests
		       (test-retry-time  (make-hash-table))
		       (allow-run-time   10)) ;; seconds to allow for killing tests before just brutally killing 'em
		   (let loop ((test (car sorted-tests))
			      (tal  (cdr sorted-tests)))
		     (let* ((test-id       (db:test-get-id test))
			    (new-test-dat  (cdb:get-test-info-by-id *runremote* test-id)))
		       (if (not new-test-dat)
			   (begin
			     (debug:print 0 "ERROR: We have a test-id of " test-id " but no record was found. NOTE: No locking of records is done between processes, do not simultaneously remove the same run from two processes!")
			     (if (not (null? tal))
				 (loop (car tal)(cdr tal))))
			   (let* ((item-path     (db:test-get-item-path new-test-dat))
				  (test-name     (db:test-get-testname new-test-dat))



				  (test-state    (db:test-get-state new-test-dat))
				  (test-fulln    (db:test-get-fullname new-test-dat))
				  (uname         (db:test-get-uname    new-test-dat))
				  (toplevel-with-children (and (db:test-get-is-toplevel test)
							       (> (cdb:remote-run db:test-toplevel-num-items db run-id test-name) 0))))
			     (case action
			       ((remove-runs)
				;; if the test is a toplevel-with-children issue an error and do not remove
				(if toplevel-with-children
				    (begin
				      (debug:print 0 "WARNING: skipping removal of " test-fulln " with run-id " run-id " as it has sub tests")
				      (hash-table-set! toplevel-retries test-fulln (+ (hash-table-ref/default toplevel-retries test-fulln 0) 1))







>









>
>
>
>










|
>
>
|









|







>
>
>




|







1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
						    testpatt states statuses
						    not-in:  #f
						    sort-by: (case action
							       ((remove-runs) 'rundir)
							       (else          'event_time))))))
	 (let* ((run-id    (db:get-value-by-header run header "id"))
		(run-state (db:get-value-by-header run header "state"))
		(run-name  (db:get-value-by-header run header "runname"))
		(tests     (if (not (equal? run-state "locked"))
			       (proc-get-tests run-id)
			       '()))
		(lasttpath "/does/not/exist/I/hope"))
	   (debug:print-info 4 "runs:operate-on run=" run ", header=" header)
	   (if (not (null? tests))
	       (begin
		 (case action
		   ((remove-runs)
		    ;; seek and kill in flight -runtests with % as testpatt here
		    (if (equal? testpatt "%")
			(tasks:kill-runner tasks-db target run-name)
			(debug:print 0 "not attempting to kill any run launcher processes as testpatt is " testpatt))
		    (debug:print 1 "Removing tests for run: " runkey " " (db:get-value-by-header run header "runname")))
		   ((set-state-status)
		    (debug:print 1 "Modifying state and staus for tests for run: " runkey " " (db:get-value-by-header run header "runname")))
		   ((print-run)
		    (debug:print 1 "Printing info for run " runkey ", run=" run ", tests=" tests ", header=" header)
		    action)
		   ((run-wait)
		    (debug:print 1 "Waiting for run " runkey ", run=" runnamepatt " to complete"))
		   (else
		    (debug:print-info 0 "action not recognised " action)))
		 (let ((sorted-tests     (sort tests (lambda (a b)(let ((dira ;; (rmt:sdb-qry 'getstr 
									 (db:test-get-rundir a)) ;; )  ;; (filedb:get-path *fdb* (db:test-get-rundir a)))
									(dirb ;; (rmt:sdb-qry 'getstr 
									 (db:test-get-rundir b))) ;; ) ;; ((filedb:get-path *fdb* (db:test-get-rundir b))))
								    (if (and (string? dira)(string? dirb))
									(> (string-length dira)(string-length dirb))
									#f)))))
		       (toplevel-retries (make-hash-table)) ;; try three times to loop through and remove top level tests
		       (test-retry-time  (make-hash-table))
		       (allow-run-time   10)) ;; seconds to allow for killing tests before just brutally killing 'em
		   (let loop ((test (car sorted-tests))
			      (tal  (cdr sorted-tests)))
		     (let* ((test-id       (db:test-get-id test))
			    (new-test-dat  (rmt:get-test-info-by-id run-id test-id)))
		       (if (not new-test-dat)
			   (begin
			     (debug:print 0 "ERROR: We have a test-id of " test-id " but no record was found. NOTE: No locking of records is done between processes, do not simultaneously remove the same run from two processes!")
			     (if (not (null? tal))
				 (loop (car tal)(cdr tal))))
			   (let* ((item-path     (db:test-get-item-path new-test-dat))
				  (test-name     (db:test-get-testname new-test-dat))
				  (run-dir       ;;(filedb:get-path *fdb*
				   ;; (rmt:sdb-qry 'getid 
				   (db:test-get-rundir new-test-dat)) ;; )    ;; run dir is from the link tree
				  (test-state    (db:test-get-state new-test-dat))
				  (test-fulln    (db:test-get-fullname new-test-dat))
				  (uname         (db:test-get-uname    new-test-dat))
				  (toplevel-with-children (and (db:test-get-is-toplevel test)
							       (> (rmt:test-toplevel-num-items run-id test-name) 0))))
			     (case action
			       ((remove-runs)
				;; if the test is a toplevel-with-children issue an error and do not remove
				(if toplevel-with-children
				    (begin
				      (debug:print 0 "WARNING: skipping removal of " test-fulln " with run-id " run-id " as it has sub tests")
				      (hash-table-set! toplevel-retries test-fulln (+ (hash-table-ref/default toplevel-retries test-fulln 0) 1))
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505

1506
1507
1508
1509
1510
1511
1512
1513
1514

1515
1516
1517
1518
1519
1520
1521
						  (hash-table-set! test-retry-time test-fulln (current-seconds))))
					    (if (> (- (current-seconds)(hash-table-ref test-retry-time test-fulln)) allow-run-time)
						;; This test is not in a correct state for cleaning up. Let's try some graceful shutdown steps first
						;; Set the test to "KILLREQ" and wait five seconds then try again. Repeat up to five times then give
						;; up and blow it away.
						(begin
						  (debug:print 0 "WARNING: could not gracefully remove test " test-fulln ", tried to kill it to no avail. Forcing state to FAILEDKILL and continuing")
						  (mt:test-set-state-status-by-id (db:test-get-id test) "FAILEDKILL" "n/a" #f)
						  (thread-sleep! 1))
						(begin
						  (mt:test-set-state-status-by-id (db:test-get-id test) "KILLREQ" "n/a" #f)
						  (thread-sleep! 1)))
					    ;; NOTE: This is suboptimal as the testdata will be used later and the state/status may have changed ...
					    (if (null? tal)
						(loop new-test-dat tal)
						(loop (car tal)(append tal (list new-test-dat)))))
					  (begin
					    (runs:remove-test-directory db new-test-dat remove-data-only)
					    (if (not (null? tal))
						(loop (car tal)(cdr tal))))))))
			       ((set-state-status)
				(debug:print-info 2 "new state " (car state-status) ", new status " (cadr state-status))
				(mt:test-set-state-status-by-id (db:test-get-id test) (car state-status)(cadr state-status) #f)
				(if (not (null? tal))
				    (loop (car tal)(cdr tal))))
			       ((run-wait)
				(debug:print-info 2 "still waiting, " (length tests) " tests still running")
				(thread-sleep! 10)
				(let ((new-tests (proc-get-tests run-id)))
				  (if (null? new-tests)
				      (debug:print-info 1 "Run completed according to zero tests matching provided criteria.")
				      (loop (car new-tests)(cdr new-tests))))))))
		       )))))
	   ;; remove the run if zero tests remain
	   (if (eq? action 'remove-runs)
	       (let ((remtests (mt:get-tests-for-run (db:get-value-by-header run header "id") #f '("DELETED") '("n/a") not-in: #t)))
		 (if (null? remtests) ;; no more tests remaining
		     (let* ((dparts  (string-split lasttpath "/"))
			    (runpath (conc "/" (string-intersperse 
						(take dparts (- (length dparts) 1))
						"/"))))
		       (debug:print 1 "Removing run: " runkey " " (db:get-value-by-header run header "runname") " and related record")
		       (cdb:remote-run db:delete-run db run-id)
		       ;; This is a pretty good place to purge old DELETED tests
		       (cdb:remote-run db:delete-tests-for-run db run-id)
		       (cdb:remote-run db:delete-old-deleted-test-records db)
		       (cdb:remote-run db:set-var db "DELETED_TESTS" (current-seconds))
		       ;; need to figure out the path to the run dir and remove it if empty
		       ;;    (if (null? (glob (conc runpath "/*")))
		       ;;        (begin
		       ;; 	 (debug:print 1 "Removing run dir " runpath)
		       ;; 	 (system (conc "rmdir -p " runpath))))
		       )))))
	 ))
     runs))

  #t)

(define (runs:remove-test-directory db test remove-data-only)
  (let* ((run-dir       (db:test-get-rundir test))    ;; run dir is from the link tree
	 (real-dir      (if (file-exists? run-dir)
			    (resolve-pathname run-dir)
			    #f)))
    (if (not remove-data-only)
	(mt:test-set-state-status-by-id (db:test-get-id test) "REMOVING" "LOCKED" #f))

    (debug:print-info 1 "Attempting to remove " (if real-dir (conc " dir " real-dir " and ") "") " link " run-dir)
    (if (and real-dir 
	     (> (string-length real-dir) 5)
	     (file-exists? real-dir)) ;; bad heuristic but should prevent /tmp /home etc.
	(begin ;; let* ((realpath (resolve-pathname run-dir)))
	  (debug:print-info 1 "Recursively removing " real-dir)
	  (if (file-exists? real-dir)







|


|











|



















|
<
<
|
|







|
>







|
|
>







1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
1523


1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
						  (hash-table-set! test-retry-time test-fulln (current-seconds))))
					    (if (> (- (current-seconds)(hash-table-ref test-retry-time test-fulln)) allow-run-time)
						;; This test is not in a correct state for cleaning up. Let's try some graceful shutdown steps first
						;; Set the test to "KILLREQ" and wait five seconds then try again. Repeat up to five times then give
						;; up and blow it away.
						(begin
						  (debug:print 0 "WARNING: could not gracefully remove test " test-fulln ", tried to kill it to no avail. Forcing state to FAILEDKILL and continuing")
					    (mt:test-set-state-status-by-id run-id (db:test-get-id test) "FAILEDKILL" "n/a" #f)
						  (thread-sleep! 1))
						(begin
					    (mt:test-set-state-status-by-id run-id (db:test-get-id test) "KILLREQ" "n/a" #f)
						  (thread-sleep! 1)))
					    ;; NOTE: This is suboptimal as the testdata will be used later and the state/status may have changed ...
					    (if (null? tal)
						(loop new-test-dat tal)
						(loop (car tal)(append tal (list new-test-dat)))))
					  (begin
					    (runs:remove-test-directory db new-test-dat remove-data-only)
					    (if (not (null? tal))
						(loop (car tal)(cdr tal))))))))
			       ((set-state-status)
				(debug:print-info 2 "new state " (car state-status) ", new status " (cadr state-status))
				(mt:test-set-state-status-by-id run-id (db:test-get-id test) (car state-status)(cadr state-status) #f)
				(if (not (null? tal))
				    (loop (car tal)(cdr tal))))
			       ((run-wait)
				(debug:print-info 2 "still waiting, " (length tests) " tests still running")
				(thread-sleep! 10)
				(let ((new-tests (proc-get-tests run-id)))
				  (if (null? new-tests)
				      (debug:print-info 1 "Run completed according to zero tests matching provided criteria.")
				      (loop (car new-tests)(cdr new-tests))))))))
		       )))))
	   ;; remove the run if zero tests remain
	   (if (eq? action 'remove-runs)
	       (let ((remtests (mt:get-tests-for-run (db:get-value-by-header run header "id") #f '("DELETED") '("n/a") not-in: #t)))
		 (if (null? remtests) ;; no more tests remaining
		     (let* ((dparts  (string-split lasttpath "/"))
			    (runpath (conc "/" (string-intersperse 
						(take dparts (- (length dparts) 1))
						"/"))))
		       (debug:print 1 "Removing run: " runkey " " (db:get-value-by-header run header "runname") " and related record")
		       (rmt:delete-run run-id)


		       (rmt:delete-old-deleted-test-records)
		       ;; (cdb:remote-run db:set-var db "DELETED_TESTS" (current-seconds))
		       ;; need to figure out the path to the run dir and remove it if empty
		       ;;    (if (null? (glob (conc runpath "/*")))
		       ;;        (begin
		       ;; 	 (debug:print 1 "Removing run dir " runpath)
		       ;; 	 (system (conc "rmdir -p " runpath))))
		       )))))
	 ))
     runs)
    (sqlite3:finalize! tasks-db))
  #t)

(define (runs:remove-test-directory db test remove-data-only)
  (let* ((run-dir       (db:test-get-rundir test))    ;; run dir is from the link tree
	 (real-dir      (if (file-exists? run-dir)
			    (resolve-pathname run-dir)
			    #f)))
    (if remove-data-only
	(mt:test-set-state-status-by-id (db:test-get-run_id test)(db:test-get-id test) "CLEANING" "LOCKED" #f)
	(mt:test-set-state-status-by-id (db:test-get-run_id test)(db:test-get-id test) "REMOVING" "LOCKED" #f))
    (debug:print-info 1 "Attempting to remove " (if real-dir (conc " dir " real-dir " and ") "") " link " run-dir)
    (if (and real-dir 
	     (> (string-length real-dir) 5)
	     (file-exists? real-dir)) ;; bad heuristic but should prevent /tmp /home etc.
	(begin ;; let* ((realpath (resolve-pathname run-dir)))
	  (debug:print-info 1 "Recursively removing " real-dir)
	  (if (file-exists? real-dir)
1534
1535
1536
1537
1538
1539
1540
1541

1542
1543
1544
1545
1546

1547
1548
1549
1550
1551
1552
1553
1554
	(if (directory? run-dir)
	    (if (> (directory-fold (lambda (f x)(+ 1 x)) 0 run-dir) 0)
		(debug:print 0 "WARNING: refusing to remove " run-dir " as it is not empty")
		(handle-exceptions
		 exn
		 (debug:print 0 "ERROR:  Failed to remove directory " run-dir ((condition-property-accessor 'exn 'message) exn) ", attempting to continue")
		 (delete-directory run-dir)))
	    (if run-dir

		(debug:print 0 "WARNING: not removing " run-dir " as it either doesn't exist or is not a symlink")
		(debug:print 0 "NOTE: the run dir for this test is undefined. Test may have already been deleted."))
	    ))
    ;; Only delete the records *after* removing the directory. If things fail we have a record 
    (if (not remove-data-only)

	(cdb:remote-run db:delete-test-records db #f (db:test-get-id test)))))

;;======================================================================
;; Routines for manipulating runs
;;======================================================================

;; Since many calls to a run require pretty much the same setup 
;; this wrapper is used to reduce the replication of code







|
>




|
>
|







1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1579
1580
1581
1582
1583
1584
1585
1586
	(if (directory? run-dir)
	    (if (> (directory-fold (lambda (f x)(+ 1 x)) 0 run-dir) 0)
		(debug:print 0 "WARNING: refusing to remove " run-dir " as it is not empty")
		(handle-exceptions
		 exn
		 (debug:print 0 "ERROR:  Failed to remove directory " run-dir ((condition-property-accessor 'exn 'message) exn) ", attempting to continue")
		 (delete-directory run-dir)))
	    (if (and run-dir
		     (not (member run-dir (list "n/a" "/tmp/badname"))))
		(debug:print 0 "WARNING: not removing " run-dir " as it either doesn't exist or is not a symlink")
		(debug:print 0 "NOTE: the run dir for this test is undefined. Test may have already been deleted."))
	    ))
    ;; Only delete the records *after* removing the directory. If things fail we have a record 
    (if remove-data-only
	(mt:test-set-state-status-by-id (db:test-get-run_id test)(db:test-get-id test) "NOT_STARTED" "n/a" #f)
	(rmt:delete-test-records (db:test-get-run_id test) (db:test-get-id test)))))

;;======================================================================
;; Routines for manipulating runs
;;======================================================================

;; Since many calls to a run require pretty much the same setup 
;; this wrapper is used to reduce the replication of code
1608
1609
1610
1611
1612
1613
1614
1615
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
1629
1630
1631
1632
1633
1634
1635
1636
1637
1638
1639
1640
1641
1642
1643
1644
1645
1646
1647
1648
1649
1650
1651


1652
1653
1654

1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
1672
1673
1674
1675
1676
1677
1678
1679
1680
1681
1682
1683
1684
    (for-each (lambda (run)
		(let ((run-id (db:get-value-by-header run header "id")))
		  (if (or lock
			  (and unlock
			       (begin
				 (print "Do you really wish to unlock run " run-id "?\n   y/n: ")
				 (equal? "y" (read-line)))))
		      (cdb:remote-run db:lock/unlock-run db run-id lock unlock user)
		      (debug:print-info 0 "Skipping lock/unlock on " run-id))))
	      runs)))
;;======================================================================
;; Rollup runs
;;======================================================================

;; Update the test_meta table for this test
(define (runs:update-test_meta test-name test-conf)
  (let ((currrecord (cdb:remote-run db:testmeta-get-record #f test-name)))
    (if (not currrecord)
	(begin
	  (set! currrecord (make-vector 11 #f))
	  (cdb:remote-run db:testmeta-add-record #f test-name)))
    (for-each 
     (lambda (key)
       (let* ((idx (cadr key))
	      (fld (car  key))
	      (val (config-lookup test-conf "test_meta" fld)))
	 ;; (debug:print 5 "idx: " idx " fld: " fld " val: " val)
	 (if (and val (not (equal? (vector-ref currrecord idx) val)))
	     (begin
	       (print "Updating " test-name " " fld " to " val)
	       (cdb:remote-run db:testmeta-update-field #f test-name fld val)))))
     '(("author" 2)("owner" 3)("description" 4)("reviewed" 5)("tags" 9)("jobgroup" 10)))))

;; Update test_meta for all tests
(define (runs:update-all-test_meta db)
  (let ((test-names (tests:get-all))) ;; (tests:get-valid-tests)))
    (for-each 
     (lambda (test-name)
       (let* ((test-conf    (mt:lazy-read-test-config test-name)))
	 ;; use the cdb:remote-run instead of passing in db
	 (if test-conf (runs:update-test_meta test-name test-conf))))
     (hash-table-keys test-names))))

;; This could probably be refactored into one complex query ...


(define (runs:rollup-run keys runname user keyvals)
  (debug:print 4 "runs:rollup-run, keys: " keys " -runname " runname " user: " user)
  (let* ((db              #f)

	 (new-run-id      (cdb:remote-run db:register-run #f keyvals runname "new" "n/a" user))
	 (prev-tests      (cdb:remote-run test:get-matching-previous-test-run-records db new-run-id "%" "%"))
	 (curr-tests      (mt:get-tests-for-run new-run-id "%/%" '() '()))
	 (curr-tests-hash (make-hash-table)))
    (cdb:remote-run db:update-run-event_time db new-run-id)
    ;; index the already saved tests by testname and itemdat in curr-tests-hash
    (for-each
     (lambda (testdat)
       (let* ((testname  (db:test-get-testname testdat))
	      (item-path (db:test-get-item-path testdat))
	      (full-name (conc testname "/" item-path)))
	 (hash-table-set! curr-tests-hash full-name testdat)))
     curr-tests)
    ;; NOPE: Non-optimal approach. Try this instead.
    ;;   1. tests are received in a list, most recent first
    ;;   2. replace the rollup test with the new *always*
    (for-each 
     (lambda (testdat)
       (let* ((testname  (db:test-get-testname testdat))
	      (item-path (db:test-get-item-path testdat))
	      (full-name (conc testname "/" item-path))
	      (prev-test-dat (hash-table-ref/default curr-tests-hash full-name #f))
	      (test-steps    (cdb:remote-run db:get-steps-for-test db (db:test-get-id testdat)))
	      (new-test-record #f))
	 ;; replace these with insert ... select
	 (apply sqlite3:execute 
		db 
		(conc "INSERT OR REPLACE INTO tests (run_id,testname,state,status,event_time,host,cpuload,diskfree,uname,rundir,item_path,run_duration,final_logf,comment) "
		      "VALUES (?,?,?,?,?,?,?,?,?,?,?,?,?,?);")
		new-run-id (cddr (vector->list testdat)))







|








|



|









|








<




>
>



>
|
|


|

















|







1640
1641
1642
1643
1644
1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
1672
1673
1674
1675
1676
1677
1678

1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1696
1697
1698
1699
1700
1701
1702
1703
1704
1705
1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
1716
1717
1718
    (for-each (lambda (run)
		(let ((run-id (db:get-value-by-header run header "id")))
		  (if (or lock
			  (and unlock
			       (begin
				 (print "Do you really wish to unlock run " run-id "?\n   y/n: ")
				 (equal? "y" (read-line)))))
		      (rmt:lock/unlock-run run-id lock unlock user)
		      (debug:print-info 0 "Skipping lock/unlock on " run-id))))
	      runs)))
;;======================================================================
;; Rollup runs
;;======================================================================

;; Update the test_meta table for this test
(define (runs:update-test_meta test-name test-conf)
  (let ((currrecord (rmt:testmeta-get-record test-name)))
    (if (not currrecord)
	(begin
	  (set! currrecord (make-vector 11 #f))
	  (rmt:testmeta-add-record test-name)))
    (for-each 
     (lambda (key)
       (let* ((idx (cadr key))
	      (fld (car  key))
	      (val (config-lookup test-conf "test_meta" fld)))
	 ;; (debug:print 5 "idx: " idx " fld: " fld " val: " val)
	 (if (and val (not (equal? (vector-ref currrecord idx) val)))
	     (begin
	       (print "Updating " test-name " " fld " to " val)
	       (rmt:testmeta-update-field test-name fld val)))))
     '(("author" 2)("owner" 3)("description" 4)("reviewed" 5)("tags" 9)("jobgroup" 10)))))

;; Update test_meta for all tests
(define (runs:update-all-test_meta db)
  (let ((test-names (tests:get-all))) ;; (tests:get-valid-tests)))
    (for-each 
     (lambda (test-name)
       (let* ((test-conf    (mt:lazy-read-test-config test-name)))

	 (if test-conf (runs:update-test_meta test-name test-conf))))
     (hash-table-keys test-names))))

;; This could probably be refactored into one complex query ...
;; NOT PORTED - DO NOT USE YET
;;
(define (runs:rollup-run keys runname user keyvals)
  (debug:print 4 "runs:rollup-run, keys: " keys " -runname " runname " user: " user)
  (let* ((db              #f)
	 ;; register run operates on the main db
	 (new-run-id      (rmt:register-run keyvals runname "new" "n/a" user))
	 (prev-tests      (rmt:get-matching-previous-test-run-records new-run-id "%" "%"))
	 (curr-tests      (mt:get-tests-for-run new-run-id "%/%" '() '()))
	 (curr-tests-hash (make-hash-table)))
    (rmt:update-run-event_time new-run-id)
    ;; index the already saved tests by testname and itemdat in curr-tests-hash
    (for-each
     (lambda (testdat)
       (let* ((testname  (db:test-get-testname testdat))
	      (item-path (db:test-get-item-path testdat))
	      (full-name (conc testname "/" item-path)))
	 (hash-table-set! curr-tests-hash full-name testdat)))
     curr-tests)
    ;; NOPE: Non-optimal approach. Try this instead.
    ;;   1. tests are received in a list, most recent first
    ;;   2. replace the rollup test with the new *always*
    (for-each 
     (lambda (testdat)
       (let* ((testname  (db:test-get-testname testdat))
	      (item-path (db:test-get-item-path testdat))
	      (full-name (conc testname "/" item-path))
	      (prev-test-dat (hash-table-ref/default curr-tests-hash full-name #f))
	      (test-steps    (rmt:get-steps-for-test (db:test-get-id testdat)))
	      (new-test-record #f))
	 ;; replace these with insert ... select
	 (apply sqlite3:execute 
		db 
		(conc "INSERT OR REPLACE INTO tests (run_id,testname,state,status,event_time,host,cpuload,diskfree,uname,rundir,item_path,run_duration,final_logf,comment) "
		      "VALUES (?,?,?,?,?,?,?,?,?,?,?,?,?,?);")
		new-run-id (cddr (vector->list testdat)))