Megatest

	  #t)
	#f)))

(define (runs:can-run-more-tests run-id jobgroup max-concurrent-jobs)
  (thread-sleep! (cond
        	  ((> *runs:can-run-more-tests-count* 20)
		   (if (runs:lownoise "waiting on tasks" 60)
		       (debug:print-info 2 *default-log-port* "waiting for tasks to complete, sleeping briefly ..."))
		   2);; obviously haven't had any work to do for a while
        	  (else 0)))
  (let* ((num-running             (rmt:get-count-tests-running run-id))
	 (num-running-in-jobgroup (rmt:get-count-tests-running-in-jobgroup run-id jobgroup))
	 (job-group-limit         (let ((jobg-count (config-lookup *configdat* "jobgroups" jobgroup)))
				    (if (string? jobg-count)
					(string->number jobg-count)

    (set! required-tests     (lset-intersection equal? (string-split test-patts ",") all-test-names))
    ;; (set! required-tests     (lset-intersection equal? test-names all-test-names))
    
    ;; look up all tests matching the comma separated list of globs in
    ;; test-patts (using % as wildcard)

    ;; (set! test-names (delete-duplicates (tests:get-valid-tests *toppath* test-patts)))
    (debug:print-info 0 *default-log-port* "tests search path: " (string-intersperse (tests:get-tests-search-path *configdat*) " "))
    (debug:print-info 0 *default-log-port* "all tests:         " (string-intersperse (sort all-test-names string<) " "))
    (debug:print-info 0 *default-log-port* "test names:        " (string-intersperse (sort test-names string<) " "))
    (debug:print-info 0 *default-log-port* "required tests:    " (string-intersperse (sort required-tests string<) " "))

    ;; on the first pass or call to run-tests set FAILS to NOT_STARTED if
    ;; -keepgoing is specified
    (if (eq? *passnum* 0)
	(begin
	  ;; Is this still necessary? I think not. Unreachable tests are marked as such and 
	  ;; should not cause problems here.

    
    (if (not (null? test-names))
	(let loop ((hed (car test-names))   ;; NOTE: This is the main loop that iterates over the test-names
		   (tal (cdr test-names)))         ;; 'return-procs tells the config reader to prep running system but return a proc
	  (change-directory *toppath*) ;; PLEASE OPTIMIZE ME!!! I think this should be a no-op but there are several places where change-directories could be happening.
	  (setenv "MT_TEST_NAME" hed) ;; 
	  (let*-values (((waitons waitors config)(tests:get-waitons hed all-tests-registry)))
	    (debug:print-info 8 *default-log-port* "waitons: " waitons)
	    ;; check for hed in waitons => this would be circular, remove it and issue an
	    ;; error
	    (if (or (member hed waitons)
		    (member hed waitors))
		(begin
		  (debug:print 0 *default-log-port* "ERROR: test " hed " has listed itself as a waiton or waitor, please correct this!")
		  (set! waitons (filter (lambda (x)(not (equal? x hed))) waitons))

		   (let* ((waiton-record   (hash-table-ref/default test-records waiton #f))
			  (waiton-tconfig  (if waiton-record (vector-ref waiton-record 1) #f))
			  (waiton-itemized (and waiton-tconfig
						(or (hash-table-ref/default waiton-tconfig "items" #f)
						    (hash-table-ref/default waiton-tconfig "itemstable" #f))))
			  (itemmaps        (tests:get-itemmaps config))  ;; (configf:lookup config "requirements" "itemmap"))
			  (new-test-patts  (tests:extend-test-patts test-patts hed waiton itemmaps)))
		     (debug:print-info 0 *default-log-port* "Test " waiton " has " (if waiton-record "a" "no") " waiton-record and" (if waiton-itemized " " " no ") "items")
		     ;; need to account for test-patt here, if I am test "a", selected with a test-patt of "hed/b%"
		     ;; and we are waiting on "waiton" we need to add "waiton/,waiton/b%" to test-patt
		     ;; is this satisfied by merely appending "/" to the waiton name added to the list?
		     ;;
		     ;; This approach causes all of the items in an upstream test to be run 

		     ;; if we have this waiton already processed once we can analzye it for extending
		     ;; tests to be run, since we can't properly process waitons unless they have been
		     ;; initially added we add them again to be processed on second round AND add the hed
		     ;; back in to also be processed on second round
		     ;;
		     (if waiton-tconfig
			 (begin
			   (set! test-names (cons waiton test-names)) ;; need to process this one, only add once the waiton tconfig read
			   (if waiton-itemized
			       (begin
				 (debug:print-info 0 *default-log-port* "New test patts: " new-test-patts ", prev test patts: " test-patts)
				 (set! required-tests (cons (conc waiton "/") required-tests))
				 (set! test-patts new-test-patts))
			       (begin
				 (debug:print-info 0 *default-log-port* "Adding non-itemized test " waiton " to required-tests")
				 (set! required-tests (cons waiton required-tests))
				 (set! test-patts new-test-patts))))
			 (begin
			   (debug:print-info 0 *default-log-port* "No testconfig info yet for " waiton ", setting up to re-process it")
			   (set! tal (append (cons waiton tal)(list hed))))) ;; (cons (conc waiton "/") required-tests))
			 
		     ;; NOPE: didn't work. required needs to be plain test names. Try tacking on to test-patts
		     ;;  - doesn't work
		     ;; (set! test-patts (conc test-patts "," waiton "/"))
		     
		     ;; (set! test-names (cons waiton test-names))))) ;; was an append, now a cons
		     )))
	     (delete-duplicates (append waitons waitors)))
	    (let ((remtests (delete-duplicates (append waitons tal))))
	      (if (not (null? remtests))
		  (begin
		    ;; (debug:print-info 0 *default-log-port* "Preprocessing continues for " (string-intersperse remtests ", "))
		    (loop (car remtests)(cdr remtests))))))))

    (if (not (null? required-tests))
	(debug:print-info 1 *default-log-port* "Adding \"" (string-intersperse required-tests " ") "\" to the run queue"))
    ;; NOTE: these are all parent tests, items are not expanded yet.
    (debug:print-info 4 *default-log-port* "test-records=" (hash-table->alist test-records))
    (let ((reglen (configf:lookup *configdat* "setup" "runqueue")))
      (if (> (length (hash-table-keys test-records)) 0)
	  (let* ((keep-going        #t)
		 (run-queue-retries 5)
		 (th1        (make-thread (lambda ()
					    (runs:run-tests-queue run-id runname test-records keyvals flags test-patts required-tests (any->number reglen) all-tests-registry))
					    ;; (handle-exceptions

		(begin
		  (if (not (hash-table-ref/default flags "-preclean" #f))
		      (hash-table-set! flags "-preclean" #t))
		  (if (not (hash-table-ref/default flags "-rerun" #f))
		      (hash-table-set! flags "-rerun" "STUCK/DEAD,n/a,ZERO_ITEMS"))
		  ;; recursive call to self
		  (runs:run-tests target runname test-patts user flags run-count: (- run-count 1)))))
	  (debug:print-info 0 *default-log-port* "No tests to run")))
    (debug:print-info 4 *default-log-port* "All done by here")
    (rmt:tasks-set-state-given-param-key task-key "done")
    ;; (sqlite3:finalize! tasks-db)
    ))


;; loop logic. These are used in runs:run-tests-queue to make it a bit more readable.
;;

					       "  res=" res " run-id=" run-id " waitons=" waitons " hed=" hed " item-path=" item-path " testmode=" testmode " itemmaps=" itemmaps)
				  '()))))
	 ;; (prereqs-not-met (mt:lazy-get-prereqs-not-met run-id waitons item-path mode: testmode itemmap: itemmap))
	 (fails           (runs:calc-fails prereqs-not-met))
	 (prereq-fails    (runs:calc-prereq-fail prereqs-not-met))
	 (non-completed   (runs:calc-not-completed prereqs-not-met))
	 (runnables       (runs:calc-runnable prereqs-not-met)))
    (debug:print-info 4 *default-log-port* "START OF INNER COND #2 "
		      "\n can-run-more:    " can-run-more
		      "\n testname:        " hed
		      "\n prereqs-not-met: " (runs:pretty-string prereqs-not-met)
		      "\n non-completed:   " (runs:pretty-string non-completed) 
		      "\n prereq-fails:    " (runs:pretty-string prereq-fails)
		      "\n fails:           " (runs:pretty-string fails)
		      "\n testmode:        " testmode

    (cond
     ;; all prereqs met, fire off the test
     ;; or, if it is a 'toplevel test and all prereqs not met are COMPLETED then launch

     ((and (not (member 'toplevel testmode))
	   (member (hash-table-ref/default test-registry (db:test-make-full-name hed item-path) 'n/a)
		   '(DONOTRUN removed CANNOTRUN))) ;; *common:cant-run-states-sym*) ;; '(COMPLETED KILLED WAIVED UNKNOWN INCOMPLETE)) ;; try to catch repeat processing of COMPLETED tests here
      (debug:print-info 1 *default-log-port* "Test " hed " set to \"" (hash-table-ref test-registry (db:test-make-full-name hed item-path)) "\". Removing it from the queue")
      (if (or (not (null? tal))
	      (not (null? reg)))
	  (list (runs:queue-next-hed tal reg reglen regfull)
		(runs:queue-next-tal tal reg reglen regfull)
		(runs:queue-next-reg tal reg reglen regfull)
		reruns)
	  (begin
	    (debug:print-info 0 *default-log-port* "Nothing left in the queue!")
	    ;; If get here twice then we know we've tried to expand all items
	    ;; since there must be a logic issue with the handling of loops in the 
	    ;; items expand phase we will brute force an exit here.
	    (if (> runs:nothing-left-in-queue-count 2)
		(begin
		  (debug:print 0 *default-log-port* "WARNING: this condition is triggered when there were no items to expand and nothing to run. Please check your run for completeness")
		  (exit 0))
		(set! runs:nothing-left-in-queue-count (+ runs:nothing-left-in-queue-count 1)))
	    #f)))

     ;; 
     ((or (null? prereqs-not-met)
	  (and (member 'toplevel testmode)
	       (null? non-completed)))
      (debug:print-info 4 *default-log-port* "runs:expand-items: (or (null? prereqs-not-met) (and (member 'toplevel testmode)(null? non-completed)))")
      (let ((test-name (tests:testqueue-get-testname test-record)))
	(setenv "MT_TEST_NAME" test-name) ;; 
	(setenv "MT_RUNNAME"   runname)
	(runs:set-megatest-env-vars run-id inrunname: runname) ;; these may be needed by the launching process
	(let ((items-list (items:get-items-from-config tconfig)))
	  (if (list? items-list)
	      (begin

     ((and (null? fails)
	   (null? prereq-fails)
	   (null? non-completed))
      (if  (runs:can-keep-running? hed 20)
	  (begin
	    (runs:inc-cant-run-tests hed)
	    (debug:print-info 1 *default-log-port* "no fails in prerequisites for " hed " but also none running, keeping " hed " for now. Try count: " (hash-table-ref/default *seen-cant-run-tests* hed 0))
	    ;; getting here likely means the system is way overloaded, kill a full minute before continuing
	    (thread-sleep! 60)
	    ;; num-retries code was here
	    ;; we use this opportunity to move contents of reg to tal
	    (list (car newtal)(append (cdr newtal) reg) '() reruns)) ;; an issue with prereqs not yet met?
	  (begin
	    (debug:print-info 1 *default-log-port* "no fails in prerequisites for " hed " but nothing seen running in a while, dropping test " hed " from the run queue")
	    (let ((test-id (rmt:get-test-id run-id hed "")))
	      (if test-id (mt:test-set-state-status-by-id run-id test-id "NOT_STARTED" "TIMED_OUT" "Nothing seen running in a while.")))
	    (list (runs:queue-next-hed tal reg reglen regfull)
		  (runs:queue-next-tal tal reg reglen regfull)
		  (runs:queue-next-reg tal reg reglen regfull)
		  reruns))))

     ((and 
       (or (not (null? fails))
	   (not (null? prereq-fails)))
       (member 'normal testmode))
      (debug:print-info 1 *default-log-port* "test "  hed " (mode=" testmode ") has failed prerequisite(s); "
			(string-intersperse (map (lambda (t)(conc (db:test-get-testname t) ":" (db:test-get-state t)"/"(db:test-get-status t))) fails) ", ")
			", removing it from to-do list")
      (let ((test-id (rmt:get-test-id run-id hed "")))
	(if test-id
	    (if (not (null? prereq-fails))
		(mt:test-set-state-status-by-id run-id test-id "NOT_STARTED" "PREQ_DISCARDED" "Failed to run due to prior failed prerequisites")
		(mt:test-set-state-status-by-id run-id test-id "NOT_STARTED" "PREQ_FAIL"      "Failed to run due to failed prerequisites"))))

					    (not (equal? x hed)))
					  (runs:calc-not-completed prereqs-not-met)))
	 (loop-list               (list hed tal reg reruns))
	 ;; configure the load runner
	 (numcpus                 (common:get-num-cpus))
	 (maxload                 (string->number (or (configf:lookup *configdat* "jobtools" "maxload") "3")))
	 (waitdelay               (string->number (or (configf:lookup *configdat* "jobtools" "waitdelay") "60"))))
    (debug:print-info 4 *default-log-port* "have-resources: " have-resources " prereqs-not-met: (" 
		      (string-intersperse 
		       (map (lambda (t)
			      (if (vector? t)
				  (conc (db:test-get-state t) "/" (db:test-get-status t))
				  (conc " WARNING: t is not a vector=" t )))
			    prereqs-not-met)
		       ", ") ") fails: " fails
		       "\nregistered? " (hash-table-ref/default test-registry (db:test-make-full-name test-name item-path) #f))
			    

    
    (if (and (not (null? prereqs-not-met))
	     (runs:lownoise (conc "waiting on tests " prereqs-not-met hed) 60))
	(debug:print-info 2 *default-log-port* "waiting on tests; " (string-intersperse (runs:mixed-list-testname-and-testrec->list-of-strings prereqs-not-met) ", ")))

    ;; Don't know at this time if the test have been launched at some time in the past
    ;; i.e. is this a re-launch?
    (debug:print-info 4 *default-log-port* "run-limits-info = " run-limits-info)
    
    (cond
     
     ;; Check item path against item-patts, 
     ;;
     ((not (tests:match test-patts (tests:testqueue-get-testname test-record) item-path required: required-tests)) ;; This test/itempath is not to be run
      ;; else the run is stuck, temporarily or permanently
      ;; but should check if it is due to lack of resources vs. prerequisites
      (debug:print-info 1 *default-log-port* "Skipping " (tests:testqueue-get-testname test-record) " " item-path " as it doesn't match " test-patts)
      (if (or (not (null? tal))(not (null? reg)))
	  (list (runs:queue-next-hed tal reg reglen regfull)
		(runs:queue-next-tal tal reg reglen regfull)
		(runs:queue-next-reg tal reg reglen regfull)
		reruns)
	  #f))
     
     ;; Register tests 
     ;;
     ((not (hash-table-ref/default test-registry (db:test-make-full-name test-name item-path) #f))
      (debug:print-info 4 *default-log-port* "Pre-registering test " test-name "/" item-path " to create placeholder" )
      ;; always do firm registration now in v1.60 and greater ;; (eq? *transport-type* 'fs) ;; no point in parallel registration if use fs
      (let register-loop ((numtries 15))
	(rmt:register-test run-id test-name item-path)
	(if (rmt:get-test-id run-id test-name item-path)
	    (hash-table-set! test-registry (db:test-make-full-name test-name item-path) 'done)
	    (if (> numtries 0)
		(begin

		    (append reg (list hed)))
		reruns)))
     
     ;; At this point hed test registration must be completed.
     ;;
     ((eq? (hash-table-ref/default test-registry (db:test-make-full-name test-name item-path) #f)
	   'start)
      (debug:print-info 0 *default-log-port* "Waiting on test registration(s): "
			(string-intersperse 
			 (filter (lambda (x)
				   (eq? (hash-table-ref/default test-registry x #f) 'start))
				 (hash-table-keys test-registry))
			 ", "))
      (thread-sleep! 0.051)
      (list hed tal reg reruns))
     
     ;; If no resources are available just kill time and loop again
     ;;
     ((not have-resources) ;; simply try again after waiting a second
      (if (runs:lownoise "no resources" 60)
	  (debug:print-info 1 *default-log-port* "no resources to run new tests, waiting ..."))
      ;; Have gone back and forth on this but db starvation is an issue.
      ;; wait one second before looking again to run jobs.
      (thread-sleep! 1)
      ;; could have done hed tal here but doing car/cdr of newtal to rotate tests
      (list (car newtal)(cdr newtal) reg reruns))
     
     ;; This is the final stage, everything is in place so launch the test

     (else
      (debug:print 4 *default-log-port* "FAILS: " fails)
      ;; If one or more of the prereqs-not-met are FAIL then we can issue
      ;; a message and drop hed from the items to be processed.
      ;; (runs:mixed-list-testname-and-testrec->list-of-strings prereqs-not-met)
      (if (and (not (null? prereqs-not-met))
	       (runs:lownoise (conc "waiting on tests " prereqs-not-met hed) 60))
	  (debug:print-info 1 *default-log-port* "waiting on tests; " (string-intersperse 
						    (runs:mixed-list-testname-and-testrec->list-of-strings 
						     prereqs-not-met) ", ")))
      (if (or (null? fails)
	      (member 'toplevel testmode))
	  (begin
	    ;; couldn't run, take a breather
	    (if  (runs:lownoise "Waiting for more work to do..." 60)
		 (debug:print-info 0 *default-log-port* "Waiting for more work to do..."))
	    (thread-sleep! 1)
	    (list (car newtal)(cdr newtal) reg reruns))
	  ;; the waiton is FAIL so no point in trying to run hed ever again
	  (if (or (not (null? reg))(not (null? tal)))
	      (if (vector? hed)
		  (begin
		    (debug:print 1 *default-log-port* "WARNING: Dropping test " test-name "/" item-path

    (set! max-retries (if (and max-retries (string->number max-retries))(string->number max-retries) 100))

    (let loop ((hed         (car sorted-test-names))
	       (tal         (cdr sorted-test-names))
	       (reg         '()) ;; registered, put these at the head of tal 
	       (reruns      '()))

      (if (not (null? reruns))(debug:print-info 4 *default-log-port* "reruns=" reruns))

      ;; Here we mark any old defunct tests as incomplete. Do this every fifteen minutes
      ;; moving this to a parallel thread and just run it once.
      ;;
      (if (> (current-seconds)(+ last-time-incomplete 900))
          (begin
            (set! last-time-incomplete (current-seconds))

	
	;; Fast skip of tests that are already "COMPLETED" - NO! Cannot do that as the items may not have been expanded yet :(
	;;
	(if (member (hash-table-ref/default test-registry tfullname #f) 
		    '(DONOTRUN removed)) ;; *common:cant-run-states-sym*) ;; '(COMPLETED KILLED WAIVED UNKNOWN INCOMPLETE))
	    (begin
	      (if (runs:lownoise (conc "been marked do not run " tfullname) 60)
		  (debug:print-info 0 *default-log-port* "Skipping test " tfullname " as it has been marked do not run due to being completed or not runnable"))
	      (if (or (not (null? tal))(not (null? reg)))
		  (loop (runs:queue-next-hed tal reg reglen regfull)
			(runs:queue-next-tal tal reg reglen regfull)
			(runs:queue-next-reg tal reg reglen regfull)
			reruns))))
		  ;; (loop (car tal)(cdr tal) reg reruns))))

				 waitons))))) ;; could do this more elegantly with a marker....
	  (debug:print 0 *default-log-port* "WARNING: Marking test " tfullname " as not runnable. It is waiting on tests that cannot be run. Giving up now.")
	  (hash-table-set! test-registry tfullname 'removed))

	 ;; items is #f then the test is ok to be handed off to launch (but not before)
	 ;; 
	 ((not items)
	  (debug:print-info 4 *default-log-port* "OUTER COND: (not items)")
	  (if (and (not (tests:match test-patts (tests:testqueue-get-testname test-record) item-path required: required-tests))
		   (not (null? tal)))
	      (loop (car tal)(cdr tal) reg reruns))
	  (let ((loop-list (runs:process-expanded-tests hed tal reg reruns reglen regfull test-record runname test-name item-path jobgroup max-concurrent-jobs run-id waitons item-path testmode test-patts required-tests test-registry registry-mutex flags keyvals run-info newtal all-tests-registry itemmaps)))
	    (if loop-list (apply loop loop-list))))

	 ;; items processed into a list but not came in as a list been processed
	 ;;
	 ((and (list? items)     ;; thus we know our items are already calculated
	       (not   itemdat))  ;; and not yet expanded into the list of things to be done
	  (debug:print-info 4 *default-log-port* "OUTER COND: (and (list? items)(not itemdat))")
	  ;; Must determine if the items list is valid. Discard the test if it is not.
	  (if (and (list? items)
		   (> (length items) 0)
		   (and (list? (car items))
			(> (length (car items)) 0))
		   (debug:debug-mode 1))
	      (debug:print 2 *default-log-port* (map (lambda (row)

		     (tests:testqueue-set-items!     new-test-record #f)
		     (tests:testqueue-set-itemdat!   new-test-record my-itemdat)
		     (tests:testqueue-set-item_path! new-test-record my-item-path)
		     (hash-table-set! test-records newtestname new-test-record)
		     (set! tal (append tal (list newtestname))))))) ;; since these are itemized create new test names testname/itempath
	   items)

	  ;; (debug:print-info 0 *default-log-port* "Test " (tests:testqueue-get-testname test-record) " is itemized but has no items")

	  ;; At this point we have possibly added items to tal but all must be handed off to 
	  ;; INNER COND logic. I think loop without rotating the queue 
	  ;; (loop hed tal reg reruns))
	  ;; (let ((newtal (append tal (list hed))))  ;; We should discard hed as it has been expanded into it's items? Yes, but only if this *is* an itemized test
	  ;; (loop (car newtal)(cdr newtal) reg reruns)
	  (if (null? tal)

	 ;; this case should not happen, added to help catch any bugs
	 ((and (list? items) itemdat)
	  (debug:print 0 *default-log-port* "ERROR: Should not have a list of items in a test and the itemspath set - please report this")
	  (exit 1))
	 ((not (null? reruns))
	  (let* ((newlst (tests:filter-non-runnable run-id tal test-records)) ;; i.e. not FAIL, WAIVED, INCOMPLETE, PASS, KILLED,
		 (junked (lset-difference equal? tal newlst)))
	    (debug:print-info 4 *default-log-port* "full drop through, if reruns is less than 100 we will force retry them, reruns=" reruns ", tal=" tal)
	    (if (< num-retries max-retries)
		(set! newlst (append reruns newlst)))
	    (set! num-retries (+ num-retries 1))
	    ;; (thread-sleep! (+ 1 *global-delta*))
	    (if (not (null? newlst))
		;; since reruns have been tacked on to newlst create new reruns from junked
		(loop (car newlst)(cdr newlst) reg (delete-duplicates junked)))))
	 ((not (null? tal))
	  (debug:print-info 4 *default-log-port* "I'm pretty sure I shouldn't get here."))
	 ((not (null? reg)) ;; could we get here with leftovers?
	  (debug:print-info 0 *default-log-port* "Have leftovers!")
	  (loop (car reg)(cdr reg) '() reruns))
	 (else
	  (debug:print-info 4 *default-log-port* "Exiting loop with...\n  hed=" hed "\n  tal=" tal "\n  reruns=" reruns))
	 )))
    ;; now *if* -run-wait we wait for all tests to be done
    ;; Now wait for any RUNNING tests to complete (if in run-wait mode)
    (thread-sleep! 5) ;; I think there is a race condition here. Let states/statuses settle
    (let wait-loop ((num-running      (rmt:get-count-tests-running-for-run-id run-id))
		    (prev-num-running 0))
      ;; (debug:print 0 *default-log-port* "num-running=" num-running ", prev-num-running=" prev-num-running)
      (if (and (or (args:get-arg "-run-wait")
		   (equal? (configf:lookup *configdat* "setup" "run-wait") "yes"))
	       (> num-running 0))
	  (begin
	    ;; Here we mark any old defunct tests as incomplete. Do this every fifteen minutes
	    ;; (debug:print 0 *default-log-port* "Got here eh! num-running=" num-running " (> num-running 0) " (> num-running 0))
	    (if (> (current-seconds)(+ last-time-incomplete 900))
		(begin
		  (debug:print-info 0 *default-log-port* "Marking stuck tests as INCOMPLETE while waiting for run " run-id ". Running as pid " (current-process-id) " on " (get-host-name))
		  (set! last-time-incomplete (current-seconds))
		  (rmt:find-and-mark-incomplete run-id #f)))
	    (if (not (eq? num-running prev-num-running))
		(debug:print-info 0 *default-log-port* "run-wait specified, waiting on " num-running " tests in RUNNING, REMOTEHOSTSTART or LAUNCHED state at " (time->string (seconds->local-time (current-seconds)))))
	    (thread-sleep! 5)
	    ;; (wait-loop (rmt:get-count-tests-running-for-run-id run-id) num-running))))
	    (wait-loop (rmt:get-count-tests-running-for-run-id run-id) num-running))))
    ;; LET* ((test-record
    ;; we get here on "drop through". All done!
    (debug:print-info 1 *default-log-port* "All tests launched")))

(define (runs:calc-fails prereqs-not-met)
  (filter (lambda (test)
	    (and (vector? test) ;; not (string? test))
		 (member (db:test-get-state test) '("INCOMPLETE" "COMPLETED"))
		 (not (member (db:test-get-status test)
			      '("PASS" "WARN" "CHECK" "WAIVED" "SKIP")))))

	 (db           #f)
	 (full-test-name #f))

    ;; setting itemdat to a list if it is #f
    (if (not itemdat)(set! itemdat '()))
    (set! item-path (item-list->path itemdat))
    (set! full-test-name (db:test-make-full-name test-name item-path))
    (debug:print-info 4 *default-log-port*
		      "\nTESTNAME: " full-test-name 
		      "\n   test-config: " (hash-table->alist test-conf)
		      "\n   itemdat: " itemdat
		      )
    (debug:print 2 *default-log-port* "Attempting to launch test " full-test-name)
    ;; (setenv "MT_TEST_NAME" test-name) ;; 
    ;; (setenv "MT_ITEMPATH"  item-path)

	    ;;
	    (if (not test-id)(set! test-id (rmt:get-test-id run-id test-name item-path)))
	    (if (not test-id)
		(begin
		  (debug:print 2 *default-log-port* "WARN: Test not pre-created? test-name=" test-name ", item-path=" item-path ", run-id=" run-id)
		  (rmt:register-test run-id test-name item-path)
		  (set! test-id (rmt:get-test-id run-id test-name item-path))))
	    (debug:print-info 4 *default-log-port* "test-id=" test-id ", run-id=" run-id ", test-name=" test-name ", item-path=\"" item-path "\"")
	    (set! testdat (rmt:get-test-info-by-id run-id test-id))
	    (if (not testdat)
		(begin
		  (debug:print-info 0 *default-log-port* "WARNING: server is overloaded, trying again in one second")
		  (thread-sleep! 1)
		  (loop)))))
      (if (not testdat) ;; should NOT happen
	  (debug:print 0 *default-log-port* "ERROR: failed to get test record for test-id " test-id))
      (set! test-id (db:test-get-id testdat))
      (if (file-exists? test-path)
	  (change-directory test-path)

	    ((member (test:get-state testdat) '("DELETED" "NOT_STARTED" "INCOMPLETE"))(set! runflag #t))
	    ;; not -rerun and PASS, WARN or CHECK, do no run
	    ((and (or (not rerun)
		      keepgoing)
		  ;; Require to force re-run for COMPLETED or *anything* + PASS,WARN or CHECK
		  (or (member (test:get-status testdat) '("PASS" "WARN" "CHECK" "SKIP" "WAIVED"))
		      (member (test:get-state  testdat) '("COMPLETED")))) 
	     (debug:print-info 2 *default-log-port* "running test " test-name "/" item-path " suppressed as it is " (test:get-state testdat) " and " (test:get-status testdat))
	     (hash-table-set! test-registry full-test-name 'DONOTRUN) ;; COMPLETED)
	     (set! runflag #f))
	    ;; -rerun and status is one of the specifed, run it
	    ((and rerun
		  (let* ((rerunlst   (string-split rerun ","))
			 (must-rerun (member (test:get-status testdat) rerunlst)))
		    (debug:print-info 3 *default-log-port* "-rerun list: " rerun ", test-status: " (test:get-status testdat)", must-rerun: " must-rerun)
		    must-rerun))
	     (debug:print-info 2 *default-log-port* "Rerun forced for test " test-name "/" item-path)
	     (set! runflag #t))
	    ;; -keepgoing, do not rerun FAIL
	    ((and keepgoing
		  (member (test:get-status testdat) '("FAIL")))
	     (set! runflag #f))
	    ((and (not rerun)
		  (member (test:get-status testdat) '("FAIL" "n/a")))

		     (if (or (not (null? running-tests)) ;; have to skip if test is running
			     (> numseconds time-since-last))
			 (set! skip-test (conc "Skipping due to previous test run less than " (configf:lookup test-conf "skip" "rundelay") " ago"))))))
		 
		 (if skip-test
		     (begin
		       (mt:test-set-state-status-by-id run-id test-id "COMPLETED" "SKIP" skip-test)
		       (debug:print-info 1 *default-log-port* "SKIPPING Test " full-test-name " due to " skip-test))
		     (if (not (launch-test test-id run-id run-info keyvals runname test-conf test-name test-path itemdat flags))
			 (begin
			   (print "ERROR: Failed to launch the test. Exiting as soon as possible")
			   (set! *globalexitstatus* 1) ;; 
			   (process-signal (current-process-id) signal/kill))))))))
	((KILLED) 
	 (debug:print 1 *default-log-port* "NOTE: " full-test-name " is already running or was explictly killed, use -force to launch it.")

	 (header       (vector-ref rundat 0))
	 (runs         (vector-ref rundat 1))
	 (states       (if state  (string-split state  ",") '()))
	 (statuses     (if status (string-split status ",") '()))
	 (state-status (if (string? new-state-status) (string-split new-state-status ",") '(#f #f)))
	 (rp-mutex     (make-mutex))
	 (bup-mutex    (make-mutex)))
    (debug:print-info 4 *default-log-port* "runs:operate-on => Header: " header " action: " action " new-state-status: " new-state-status)
    (if (> 2 (length state-status))
	(begin
	  (debug:print 0 *default-log-port* "ERROR: the parameter to -set-state-status is a comma delimited string. E.g. COMPLETED,FAIL")
	  (exit)))
    (for-each
     (lambda (run)
       (let ((runkey (string-intersperse (map (lambda (k)

		(run-state (db:get-value-by-header run header "state"))
		(run-name  (db:get-value-by-header run header "runname"))
		(tests     (if (not (equal? run-state "locked"))
			       (proc-get-tests run-id)
			       '()))
		(lasttpath "/does/not/exist/I/hope")
		(worker-thread #f))
	   (debug:print-info 4 *default-log-port* "runs:operate-on run=" run ", header=" header)
	   (if (not (null? tests))
	       (begin
		 (case action
		   ((remove-runs)
		    (if (tasks:need-server run-id)(tasks:start-and-wait-for-server tdbdat run-id 10))
		    ;; seek and kill in flight -runtests with % as testpatt here
		    ;; (if (equal? testpatt "%")

							 ((restore)(archive:bup-restore (args:get-arg "-archive") run-id run-name tests rp-mutex bup-mutex))
							 (else 
							  (debug:print 0 *default-log-port* "ERROR: unrecognised sub command to -archive. Run \"megatest\" to see help")
							  (exit))))
						     "archive-bup-thread"))
		    (thread-start! worker-thread))
		   (else
		    (debug:print-info 0 *default-log-port* "action not recognised " action)))
		 
		 ;; actions that operate on one test at a time can be handled below
		 ;;
		 (let ((sorted-tests     (filter 
					  vector?
					  (sort tests (lambda (a b)(let ((dira ;; (rmt:sdb-qry 'getstr 
									  (db:test-get-rundir a)) ;; )  ;; (filedb:get-path *fdb* (db:test-get-rundir a)))

				      (hash-table-set! toplevel-retries test-fulln (+ (hash-table-ref/default toplevel-retries test-fulln 0) 1))
				      (if (> (hash-table-ref toplevel-retries test-fulln) 3)
					  (if (not (null? tal))
					      (loop (car tal)(cdr tal))) ;; no else clause - drop it if no more in queue and > 3 tries
					  (let ((newtal (append tal (list test))))
					    (loop (car newtal)(cdr newtal))))) ;; loop with test still in queue
				    (begin
				      (debug:print-info 0 *default-log-port* "test: " test-name " itest-state: " test-state)
				      (if (member test-state (list "RUNNING" "LAUNCHED" "REMOTEHOSTSTART" "KILLREQ"))
					  (begin
					    (if (not (hash-table-ref/default test-retry-time test-fulln #f))
						(begin
						  ;; want to set to REMOVING BUT CANNOT do it here?
						  (hash-table-set! test-retry-time test-fulln (current-seconds))))
					    (if (> (- (current-seconds)(hash-table-ref test-retry-time test-fulln)) allow-run-time)

						(loop (car tal)(append tal (list new-test-dat)))))
					  (begin
					    (runs:remove-test-directory new-test-dat mode) ;; 'remove-all)
					    (if (not (null? tal))
						(loop (car tal)(cdr tal)))))))
				(rmt:update-run-stats run-id (rmt:get-raw-run-stats run-id)))
			       ((set-state-status)
				(debug:print-info 2 *default-log-port* "new state " (car state-status) ", new status " (cadr state-status))
				(mt:test-set-state-status-by-id run-id (db:test-get-id test) (car state-status)(cadr state-status) #f)
				(if (not (null? tal))
				    (loop (car tal)(cdr tal))))
			       ((run-wait)
				(debug:print-info 2 *default-log-port* "still waiting, " (length tests) " tests still running")
				(thread-sleep! 10)
				(let ((new-tests (proc-get-tests run-id)))
				  (if (null? new-tests)
				      (debug:print-info 1 *default-log-port* "Run completed according to zero tests matching provided criteria.")
				      (loop (car new-tests)(cdr new-tests)))))
			       ((archive)
				(if (and run-dir (not toplevel-with-children))
				    (let ((ddir (conc run-dir "/")))
				      (case (string->symbol (args:get-arg "-archive"))
					((save save-remove keep-html)
					 (if (file-exists? ddir)
					     (debug:print-info 0 *default-log-port* "Estimating disk space usage for " test-fulln ": " (common:get-disk-space-used ddir)))))))
				(if (not (null? tal))
				    (loop (car tal)(cdr tal))))
			       )))
		       )
		     (if worker-thread (thread-join! worker-thread))))))
	   ;; remove the run if zero tests remain
	   (if (eq? action 'remove-runs)

			    ;; (resolve-pathname run-dir)
			    (common:nice-path run-dir)
			    #f)))
    (case mode
      ((remove-data-only)(mt:test-set-state-status-by-id (db:test-get-run_id test)(db:test-get-id test) "CLEANING" "LOCKED" #f))
      ((remove-all)      (mt:test-set-state-status-by-id (db:test-get-run_id test)(db:test-get-id test) "REMOVING" "LOCKED" #f))
      ((archive-remove)  (mt:test-set-state-status-by-id (db:test-get-run_id test)(db:test-get-id test) "ARCHIVE_REMOVING" #f #f)))
    (debug:print-info 1 *default-log-port* "Attempting to remove " (if real-dir (conc " dir " real-dir " and ") "") " link " run-dir)
    (if (and real-dir 
	     (> (string-length real-dir) 5)
	     (file-exists? real-dir)) ;; bad heuristic but should prevent /tmp /home etc.
	(begin ;; let* ((realpath (resolve-pathname run-dir)))
	  (debug:print-info 1 *default-log-port* "Recursively removing " real-dir)
	  (if (file-exists? real-dir)
	      (runs:safe-delete-test-dir real-dir)
	      (debug:print 0 *default-log-port* "WARNING: test dir " real-dir " appears to not exist or is not readable")))
	(if real-dir 
	    (debug:print 0 *default-log-port* "WARNING: directory " real-dir " does not exist")
	    (debug:print 0 *default-log-port* "WARNING: no real directory corrosponding to link " run-dir ", nothing done")))
    (if (symbolic-link? run-dir)
	(begin
	  (debug:print-info 1 *default-log-port* "Removing symlink " run-dir)
	  (handle-exceptions
	   exn
	   (debug:print 0 *default-log-port* "ERROR:  Failed to remove symlink " run-dir ((condition-property-accessor 'exn 'message) exn) ", attempting to continue")
	   (delete-file run-dir)))
	(if (directory? run-dir)
	    (if (> (directory-fold (lambda (f x)(+ 1 x)) 0 run-dir) 0)
		(debug:print 0 *default-log-port* "WARNING: refusing to remove " run-dir " as it is not empty")

		(let ((run-id (db:get-value-by-header run header "id")))
		  (if (or lock
			  (and unlock
			       (begin
				 (print "Do you really wish to unlock run " run-id "?\n   y/n: ")
				 (equal? "y" (read-line)))))
		      (rmt:lock/unlock-run run-id lock unlock user)
		      (debug:print-info 0 *default-log-port* "Skipping lock/unlock on " run-id))))
	      runs)))
;;======================================================================
;; Rollup runs
;;======================================================================

;; Update the test_meta table for this test
(define (runs:update-test_meta test-name test-conf)