Megatest

(declare (uses tdb))
(declare (uses mt))
(declare (uses api))
(declare (uses tasks)) ;; only used for debugging.
(declare (uses env))
(declare (uses diff-report))
(declare (uses commonmod))
(declare (uses adjutant))
;; (declare (uses ftail))
;; (import ftail)

(import stml2 mutils commonmod adjutant)

;; invoke the imports
;; (declare (uses mtargs.import))
;; (declare (uses mtconfigf.import))
(declare (uses cookie.import))
(declare (uses stml2.import))
(declare (uses pkts.import))
(declare (uses commonmod.import))
(declare (uses adjutant.import))

(define *db* #f) ;; this is only for the repl, do not use in general!!!!

(include "common_records.scm")
(include "key_records.scm")
(include "db_records.scm")
(include "run_records.scm")

  :units                  : name of the units for value, expected_value etc. (optional)
  -load-test-data         : read test specific data for storage in the test_data table
                            from standard in. Each line is comma delimited with four
                            fields category,variable,value,comment

Queries
  -list-runs patt         : list runs matching pattern \"patt\", % is the wildcard
  -fields fieldspec       : fields to include in json dump; runs:id,runame+tests:testname+steps
  -dumpmode MODE          : dump in MODE format instead of sexpr, MODE=json,ini,sexp etc. (add -debug 0,9 to see which file contributes each line)
  -show-keys              : show the keys used in this megatest setup
  -test-files targpatt    : get the most recent test path/file matching targpatt e.g. %/% or '*.log'
                            returns list sorted by age ascending, see examples below
  -test-paths             : get the test paths matching target, runname, item and test
                            patterns.
  -list-disks             : list the disks available for storing runs
  -list-targets           : list the targets in runconfigs.config
  -list-db-targets        : list the target combinations used in the db
  -show-config            : dump the internal representation of the megatest.config file
  -show-runconfig         : dump the internal representation of the runconfigs.config file

  -show-cmdinfo           : dump the command info for a test (run in test environment)
  -section sectionName
  -var varName            : for config and runconfig lookup value for sectionName varName
  -since N                : get list of runs changed since time N (Unix seconds)

  -sort fieldname         : in -list-runs sort tests by this field
  -testdata-csv [categorypatt/]varpatt  : dump testdata for given category

Misc 
  -start-dir path         : switch to this directory before running megatest
  -contour cname          : add a level of hierarcy to the linktree and run paths
  -area-tag tagname       : add a tag to an area while syncing to pgdb
  -run-tag tagname        : add a tag to a run while syncing to pgdb
  -rebuild-db             : bring the database schema up to date
  -cleanup-db             : remove any orphan records, vacuum the db
  -import-megatest.db     : push data from megatest.db to cache db files in /tmp/$USER
  -sync-to-megatest.db    : pull data from cache files in /tmp/$USER to megatest.db
  -sync-to dest           : sync to new postgresql central style database
  -update-meta            : update the tests metadata for all tests
  -setvars VAR1=val1,VAR2=val2 : Add environment variables to a run NB// these are
                                 overwritten by values set in config files.
  -server -|hostname      : start the server (reduces contention on megatest.db), use
                            - to automatically figure out hostname
  -adjutant C,M           : start the server/adjutant with allocated cores C and Mem M (Gig), 
                            use 0,0 to auto use full machine
  -transport http|rpc     : use http or rpc for transport (default is http) 
  -log logfile            : send stdout and stderr to logfile
  -list-servers           : list the servers 
  -kill-servers           : kill all servers
  -repl                   : start a repl (useful for extending megatest)
  -load file.scm          : load and run file.scm
  -mark-incompletes       : find and mark incomplete tests

  -generate-html-structure  : create a top level html veiw to list targets/runs and a Run view within each run directory.  
  -list-run-time          : list time requered to complete runs. It supports following switches
                            -run-patt <patt> -target-patt <patt> -dumpmode <csv,json,plain-text>
  -list-test-time	  : list time requered to complete each test in a run. It following following arguments
                            -runname <patt> -target <patt> -dumpmode <csv,json,plain-text>
  -syscheck               : do some very basic checks; write access and space in tmp, home, runs, links and 
                            is $DISPLAY valid 
  -list-waivers           : dump waivers for specified target, runname, testpatt to stdout

Diff report
  -diff-rep               : generate diff report (must include -src-target, -src-runname, -target, -runname
                                                  and either -diff-email or -diff-html)
  -src-target <target>
  -src-runname <target>
  -diff-email <emails>    : comma separated list of email addresses to send diff report

			;; values and messages
			":category"
			":variable"
			":value"
			":expected"
			":tol"
			":units"

			;; misc
			"-start-dir"
                        "-run-patt"
                        "-target-patt"   
			"-contour"
                        "-area-tag"  
                        "-area"  
			"-run-tag"
			"-server"
			"-adjutant"
			"-transport"
			"-port"
			"-extract-ods"
			"-pathmod"
			"-env2file"
			"-envcap"
			"-envdelta"

                        "-src-target"
                        "-src-runname"
                        "-diff-email"
			"-sync-to"			
			"-pgsync"
			"-kill-wait"    ;; wait this long before removing test (default is 10 sec)
                        "-diff-html"

			)
 		 (list  "-h" "-help" "--help"
			"-manual"
			"-version"
		        "-force"
		        "-xterm"
		        "-showkeys"

			"-list-disks"
			"-list-targets"
			"-list-db-targets"
			"-show-runconfig"
			"-show-config"
			"-show-cmdinfo"
			"-get-run-status"
			"-list-waivers"

			;; queries
			"-test-paths" ;; get path(s) to a test, ordered by youngest first

			"-runall"    ;; run all tests, respects -testpatt, defaults to %
			"-run"       ;; alias for -runall
			"-remove-runs"

;;(if (not (args:get-arg "-server"))
;;    (thread-start! *watchdog*)) ;; if starting a server; wait till we get to running state before kicking off watchdog
(let* ((no-watchdog-args
       '("-list-runs"
         "-testdata-csv"
         "-list-servers"
         "-server"
	 "-adjutant"
         "-list-disks"
         "-list-targets"
         "-show-runconfig"
         ;;"-list-db-targets"
         "-show-runconfig"
         "-show-config"
         "-show-cmdinfo"

;; Server? Start up here.
;;
(if (args:get-arg "-server")
    (let ((tl        (launch:setup))
          (transport-type (string->symbol (or (args:get-arg "-transport") "http"))))
      (server:launch 0 transport-type)
      (set! *didsomething* #t)))

;; The adjutant is a bit different, it does NOT run (launch:setup) as it is not necessarily tied to
;; a specific Megatest area. Detail are being hashed out and this may change.
;;
(if (args:get-arg "-adjutant")
    (begin
      (adjutant-run)
      (set! *didsomething* #t)))

(if (or (args:get-arg "-list-servers")
        (args:get-arg "-kill-servers"))
    (let ((tl (launch:setup)))
      (if tl ;; all roads from here exit
	  (let* ((servers (server:get-list *toppath*))
		 (fmtstr  "~8a~22a~20a~20a~8a\n"))

	  ;; (system (conc "rm -rf " tempdir))
	  (set! *didsomething* #t)
          (set! *time-to-exit* #t)
          ) ;; end if true branch (end of a let)
        ) ;; end if
    ) ;; end if -list-runs


;; list-waivers
(if (and (args:get-arg "-list-waivers")
	 (launch:setup))
    (let* ((runpatt     (or (args:get-arg "-runname") "%"))
	   (testpatt    (common:args-get-testpatt #f))
	   (keys        (rmt:get-keys)) 
	   (runsdat     (rmt:get-runs-by-patt
			 keys runpatt 
			 (common:args-get-target) #f #f
			 '("id" "runname" "state" "status" "owner" "event_time" "comment") 0))
	   (runs        (db:get-rows runsdat))
	   (header      (db:get-header runsdat))
	   (results     (make-hash-table))  ;; [target] ( (testname/itempath . "comment") ... )
	   (addtest     (lambda (target testname itempath comment)
			  (hash-table-set! results target (cons (cons (conc testname "/" itempath) comment)
								(hash-table-ref/default results target '())))))
	   (last-target #f))
      (for-each
       (lambda (run)
	 (let* ((run-id  (db:get-value-by-header run header "id"))
		(target  (rmt:get-target run-id))
		(runname (db:get-value-by-header run header "runname")) 
		(tests   (rmt:get-tests-for-run
			  run-id testpatt '("COMPLETED") '("WAIVED") #f #f #f 'testname 'asc							     ;; use qryvals if test-spec provided
			  #f #f #f)))
	   (if (not (equal? target last-target))
	       (print "[" target "]"))
	   (set! last-target target)
	   (print "# " runname)
	   (for-each
	    (lambda (testdat)
	      (let* ((testfullname (conc (db:test-get-testname testdat)
					 (if (equal? "" (db:test-get-item-path testdat))
					     ""
					     (conc "/" (db:test-get-item-path testdat)))
					 )))
	      (print testfullname " " (db:test-get-comment testdat))))
	    tests)))
       runs)
      (set! *didsomething* #t)))

      
;;======================================================================
;; full run
;;======================================================================

(define (handle-run-requests target runname keys keyvals need-clean)	 
  (if (or (args:get-arg "-kill-rerun") (args:get-arg "-rerun-clean")) ;; first set states/statuses correct
      ;; For rerun-clean do we or do we not support the testpatt?
      (let ((states   (or (configf:lookup *configdat* "validvalues" "cleanrerun-states")
			  "KILLREQ,KILLED,UNKNOWN,INCOMPLETE,STUCK,NOT_STARTED"))
	    (statuses (or (configf:lookup *configdat* "validvalues" "cleanrerun-statuses")
			  "FAIL,INCOMPLETE,ABORT,CHECK,DEAD,PREQ_FAIL,PREQ_DISCARDED")))
	(hash-table-set! args:arg-hash "-preclean" #t)
	(runs:operate-on 'set-state-status
			 target
			 (common:args-get-runname)  ;; (or (args:get-arg "-runname")(args:get-arg ":runname"))
			 ;; "%" ;; (common:args-get-testpatt #f) ;; (args:get-arg "-testpatt")
			 (common:args-get-testpatt #f) ;; (args:get-arg "-testpatt")
			 state:  states
			 ;; status: statuses
			 new-state-status: "NOT_STARTED,n/a")
	(runs:clean-cache target runname *toppath*)
	(runs:operate-on 'set-state-status
			 target
			 (common:args-get-runname)  ;; (or (args:get-arg "-runname")(args:get-arg ":runname"))
			 ;; "%" ;; (common:args-get-testpatt #f) ;; (args:get-arg "-testpatt")
			 (common:args-get-testpatt #f) ;; (args:get-arg "-testpatt")
			 ;; state:  states
			 status: statuses
			 new-state-status: "NOT_STARTED,n/a")))
  ;; RERUN ALL
  (if (args:get-arg "-rerun-all") ;; first set states/statuses correct
      (let* ((rconfig (full-runconfigs-read)))
	(hash-table-set! args:arg-hash "-preclean" #t)
	(runs:operate-on 'set-state-status
			 target
			 (common:args-get-runname)  ;; (or (args:get-arg "-runname")(args:get-arg ":runname"))
			 (common:args-get-testpatt rconfig) ;; (args:get-arg "-testpatt")
			 state:  #f
			 ;; status: statuses
			 new-state-status: "NOT_STARTED,n/a")
	(runs:clean-cache target runname *toppath*)
	(runs:operate-on 'set-state-status
			 target
			 (common:args-get-runname)  ;; (or (args:get-arg "-runname")(args:get-arg ":runname"))
			 (common:args-get-testpatt rconfig) ;; (args:get-arg "-testpatt")
			 ;; state:  states
			 status: #f
			 new-state-status: "NOT_STARTED,n/a")))
  (let* ((config-reruns      (let ((x (configf:lookup *configdat* "setup" "reruns")))
			       (if x (string->number x) #f)))
	 (rerun-cnt (if config-reruns
			config-reruns
			1)))

    (runs:run-tests target
		    runname
		    #f ;; (common:args-get-testpatt #f)
		    ;; (or (args:get-arg "-testpatt")
		    ;;     "%")
		    user
		    args:arg-hash
		    run-count: rerun-cnt)))

;; get lock in db for full run for this directory
;; for all tests with deps
;;   walk tree of tests to find head tasks
;;   add head tasks to task queue
;;   add dependant tasks to task queue 
;;   add remaining tasks to task queue

(if (or (args:get-arg "-runall")
	(args:get-arg "-run")
	(args:get-arg "-rerun-clean")
	(args:get-arg "-rerun-all")
	(args:get-arg "-runtests")
        (args:get-arg "-kill-rerun"))
    (let ((need-clean (or (args:get-arg "-rerun-clean")
                          (args:get-arg "-rerun-all")))
	  (orig-cmdline (string-intersperse (argv) " ")))
      (general-run-call 
       "-runall"
       "run all tests"
       (lambda (target runname keys keyvals)








	 (if (or (string-search "%" target)






		 (string-search "%" runname)) ;; we are being asked to re-run multiple runs
	     (let* ((run-specs (rmt:simple-get-runs runname #f #f target #f))) ;; list of simple-run records
	       (debug:print-info 0 *default-log-port* "Pattern supplied for target or runname with "
				 (length run-specs) " matches round. Running each in turn.")
	       (if (null? run-specs)
		   (debug:print 0 *default-log-port* "WARNING: No runs match target " target " and runname " runname))


	       (for-each (lambda (spec) 
			   (let* ((precmd     (if (args:get-arg "-precmd")(conc (args:get-arg "-precmd") " ") ""))


				  (newcmdline (conc



					       precmd
					       (string-substitute
						(conc "target " target)







						(conc "target " (simple-run-target spec))






						(string-substitute
						 (conc "runname " runname)
						 (conc "runname " (simple-run-runname spec))
						 orig-cmdline)))))
			     (debug:print 0 *default-log-port* "ORIG: " orig-cmdline)
			     (debug:print 0 *default-log-port* "NEW:  " newcmdline)
			     (system newcmdline)))
			 run-specs))





	     (handle-run-requests target runname keys keyvals need-clean))))))

;;======================================================================
;; run one test
;;======================================================================

;; 1. find the config file
;; 2. change to the test directory