Megatest

(declare (uses common))
(declare (uses items))
(declare (uses runconfig))
(declare (uses tests))
(declare (uses server))
(declare (uses mt))
(declare (uses archive))
(declare (uses keys))
;; (declare (uses filedb))

(include "common_records.scm")
(include "key_records.scm")
(include "db_records.scm")
(include "run_records.scm")
(include "test_records.scm")

(define (runs:set-megatest-env-vars run-id #!key (inkeys #f)(inrunname #f)(inkeyvals #f)(intarget #f)(testname #f)(itempath #f))
  (let* ((target    (or intarget 
			(common:args-get-target)
			(get-environment-variable "MT_TARGET")))
	 (keys      (if inkeys    inkeys    (rmt:get-keys)))
	 (keyvals   (if inkeyvals inkeyvals (keys:target->keyval keys target)))
	 (vals      (hash-table-ref/default *env-vars-by-run-id* run-id #f))
	 (link-tree (common:get-linktree))) ;; (configf:lookup *configdat* "setup" "linktree")))
    (if testname (setenv "MT_TEST_NAME" testname))
    (if itempath (setenv "MT_ITEMPATH"  itempath))

    ;; get the info from the db and put it in the cache
    (if link-tree
	(setenv "MT_LINKTREE" link-tree)
	(debug:print-error 0 *default-log-port* "linktree not set, should be set in megatest.config in [setup] section."))

    ;; from the cached data set the vars
    (hash-table-for-each
     vals
     (lambda (key val)
       (debug:print 2 *default-log-port* "setenv " key " " val)
       (safe-setenv key val)))
    (if (not (get-environment-variable "MT_TARGET"))(setenv "MT_TARGET" target))
    ;; we had a case where there was an exception generated by the hash-table-ref
    ;; due to *configdat* being #f Adding a handle and exit
    (let fatal-loop ((count 0))
      (handle-exceptions
	  exn
	  (let ((call-chain (get-call-chain))
		(msg        ((condition-property-accessor 'exn 'message) exn)))
	    (if (< count 5)
		(begin ;; this call is colliding, do some crude stuff to fix it.
		  (debug:print 0 *default-log-port* "ERROR: *configdat* was inaccessible! This should never happen. Retry #" count)
		  (launch:setup force-reread: #t)
		  (fatal-loop (+ count 1)))
		(begin
		  (debug:print 0 *default-log-port* "FATAL: *configdat* was inaccessible! This should never happen. Retried " count " times. Message: " msg)
		  (debug:print 0 *default-log-port* "Call chain:")
		  (with-output-to-port *default-log-port*
		    (lambda ()(pp call-chain)))
		  (exit 1))))
	(alist->env-vars (hash-table-ref/default *configdat* "env-override" '()))))
    ;; Lets use this as an opportunity to put MT_RUNNAME in the environment
    (let ((runname  (if inrunname inrunname (rmt:get-run-name-from-id run-id))))
      (if runname
	  (setenv "MT_RUNNAME" runname)
	  (debug:print-error 0 *default-log-port* "no value for runname for id " run-id)))
    (setenv "MT_RUN_AREA_HOME" *toppath*)
    ;; if a testname and itempath are available set the remaining appropriate variables

;;            
(define (runs:run-tests target runname test-patts user flags #!key (run-count 1)) ;; test-names
  (let* ((keys               (keys:config-get-fields *configdat*))
	 (keyvals            (keys:target->keyval keys target))
	 (run-id             (rmt:register-run keyvals runname "new" "n/a" user (args:get-arg "-contour")))  ;;  test-name)))
	 ;; (deferred          '()) ;; delay running these since they have a waiton clause
	 (runconfigf         (conc  *toppath* "/runconfigs.config"))
         (dbfile             (conc  *toppath* "/megatest.db"))
         (readonly-mode      (not (file-write-access? dbfile)))
	 (test-records       (make-hash-table))
	 ;; need to process runconfigs before generating these lists
	 (all-tests-registry #f)  ;; (tests:get-all)) ;; (tests:get-valid-tests (make-hash-table) test-search-path)) ;; all valid tests to check waiton names
	 (all-test-names     #f)  ;; (hash-table-keys all-tests-registry))
	 (test-names         #f)  ;; Generated by a call to (tests:filter-test-names all-test-names test-patts))
	 (required-tests     #f)  ;; Put fully qualified test/testpath names in this list to be done
	 (task-key           (conc (hash-table->alist flags) " " (get-host-name) " " (current-process-id)))
	 ;; (tdbdat             (tasks:open-db))
	 (config-reruns      (let ((x (configf:lookup *configdat* "setup" "reruns")))
			       (if x (string->number x) #f)))
	 (allowed-tests      #f))

    ;; check if readonly
    (when readonly-mode
      (debug:print-error 0 *default-log-port* "megatest.db is readonly.  Cannot proceed.")
      (exit 1))

    ;; per user request. If less than 100Meg space on dbdir partition, bail out with error
    ;; this will reduce issues in database corruption
    (common:check-db-dir-and-exit-if-insufficient)

    ;; override the number of reruns from the configs
    (if (and config-reruns
	     (> run-count config-reruns))
	(set! run-count config-reruns))
    
    ;; (if (tasks:need-server run-id)(tasks:start-and-wait-for-server tdbdat run-id 10))

    (let ((sighand (lambda (signum)
		     ;; (signal-mask! signum) ;; to mask or not? seems to cause issues in exiting
		     (set! *time-to-exit* #t)
		     (print "Received signal " signum ", cleaning up before exit. Please wait...")
		     (let ((th1 (make-thread (lambda ()
					       ;; (let ((tdbdat (tasks:open-db)))
						 (rmt:tasks-set-state-given-param-key task-key "killed") ;; )
					       (print "Killed by signal " signum ". Exiting")
					       (thread-sleep! 3)
					       (exit))))
			   (th2 (make-thread (lambda ()
					       (thread-sleep! 5)
					       (debug:print 0 *default-log-port* "Done")
					       (exit 4)))))
		       (thread-start! th2)
		       (thread-start! th1)
		       (thread-join! th2)))))
      (set-signal-handler! signal/int sighand)
      (set-signal-handler! signal/term sighand))

    ;; force the starting of a server
    (debug:print 0 *default-log-port* "waiting on server...")
    (server:start-and-wait *toppath*)
    
    (runs:set-megatest-env-vars run-id inkeys: keys inrunname: runname) ;; these may be needed by the launching process
    (set! runconf (if (file-exists? runconfigf)
		      (setup-env-defaults runconfigf run-id *already-seen-runconfig-info* keyvals target)
		      (begin
			(debug:print 0 *default-log-port* "WARNING: You do not have a run config file: " runconfigf)
			#f)))

    (if (not test-patts) ;; first time in - adjust testpatt
	(set! test-patts (common:args-get-testpatt runconf)))
    (if (args:get-arg "-tagexpr")
	(begin
	  (set! allowed-tests (string-join (runs:get-tests-matching-tags (args:get-arg "-tagexpr")) ","))
	  	  (debug:print-info 0 *default-log-port* "filtering initial test list with tagexpr: " (args:get-arg "-tagexpr") " => " allowed-tests)
		  ));; tests will be ANDed with this list

    ;; register this run in monitor.db
    (rmt:tasks-add "run-tests" user target runname test-patts task-key) ;; params)
    (rmt:tasks-set-state-given-param-key task-key "running")

    ;; Now generate all the tests lists
    (set! all-tests-registry (tests:get-all))   ;; hash of testname => path-to-test

	  ;; on test A but test B reached the point on being registered as NOT_STARTED and test
	  ;; A failed for some reason then on re-run using -keepgoing the run can never complete.
	  ;;
	  ;; (rmt:general-call 'delete-tests-in-state run-id "NOT_STARTED")
	  
	  ;; Now convert anything in allow-auto-rerun to NOT_STARTED
	  ;;
	  (for-each
	   (lambda (state-status)
	     (let* ((ss-lst (string-split-fields "/" state-status #:infix))
		    (state  (if (> (length ss-lst) 0)(car  ss-lst) #f))
		    (status (if (> (length ss-lst) 1)(cadr ss-lst) #f)))
	       (rmt:set-tests-state-status run-id test-names state status "NOT_STARTED" status)))
	   ;; list of state/status pairs separated by spaces
	   (string-split (or (configf:lookup *configdat* "setup" "allow-auto-rerun") "")))))

    ;; Ensure all tests are registered in the test_meta table
    (runs:update-all-test_meta #f)

    ;; now add non-directly referenced dependencies (i.e. waiton)
    ;;======================================================================
    ;; refactoring this block into tests:get-full-data

		  (cons hed reruns)))
	  #f)) ;; #f flags do not loop

     ((and (not (null? fails))(member 'toplevel testmode))
      (if (or (not (null? reg))(not (null? tal)))
	   (list (car newtal)(append (cdr newtal) reg) '() reruns)
	  #f)) 
     ((null? runnables) #f) ;; if we get here and non-completed is null then it is all over.
     (else
      (debug:print 0 *default-log-port* "WARNING: FAILS or incomplete tests maybe preventing completion of this run. Watch for issues with test " hed ", continuing for now")
      ;; (list (runs:queue-next-hed tal reg reglen regfull)
      ;;   	(runs:queue-next-tal tal reg reglen regfull)
      ;;   	(runs:queue-next-reg tal reg reglen regfull)
      ;;   	reruns)
      (list (car newtal)(cdr newtal) reg reruns)))))

      (list (car newtal)(cdr newtal) reg reruns))
     
     ;; This is the final stage, everything is in place so launch the test
     ;;
     ((and have-resources
	   (or (null? prereqs-not-met)
	       (and (member 'toplevel testmode) ;;  'toplevel)
		    (null? non-completed)
		    (not (member 'exclusive testmode)))))
      ;; (hash-table-delete! *max-tries-hash* (db:test-make-full-name test-name item-path))
      ;; we are going to reset all the counters for test retries by setting a new hash table
      ;; this means they will increment only when nothing can be run
      (set! *max-tries-hash* (make-hash-table))
      ;; well, first lets see if cpu load throttling is enabled. If so wait around until the
      ;; average cpu load is under the threshold before continuing
      (if (configf:lookup *configdat* "jobtools" "maxload") ;; only gate if maxload is specified

	(max-concurrent-jobs   (let ((mcj (config-lookup *configdat* "setup"     "max_concurrent_jobs")))
				 (if (and mcj (string->number mcj))
				     (string->number mcj)
				     1))) ;; length of the register queue ahead
	(reglen                (if (number? reglen-in) reglen-in 1))
	(last-time-incomplete  (- (current-seconds) 900)) ;; force at least one clean up cycle
	(last-time-some-running (current-seconds))
	;; (tdbdat                (tasks:open-db))
	(runsdat (make-runs:dat
		  ;; hed: hed
		  ;; tal: tal
		  ;; reg: reg
		  ;; reruns: reruns
		  reglen: reglen
		  regfull: #f ;; regfull

			   waitons:     waitons
			   testmode:    testmode
			   newtal:      newtal
			   itemmaps:    itemmaps
			   ;; prereqs-not-met: prereqs-not-met
			   )))
	(runs:dat-regfull-set! runsdat regfull)

	;; every 15 minutes verify the server is there for this run
	(if (and (common:low-noise-print 240 "try start server"  run-id)
		 (not (server:check-if-running *toppath*)))
	    (server:kind-run *toppath*))
	
	(if (> num-running 0)
	  (set! last-time-some-running (current-seconds)))

      (if (> (current-seconds)(+ last-time-some-running (or (configf:lookup *configdat* "setup" "give-up-waiting") 36000)))
	  (hash-table-set! *max-tries-hash* tfullname (+ (hash-table-ref/default *max-tries-hash* tfullname 0) 1)))
	;; (debug:print 0 *default-log-port* "max-tries-hash: " (hash-table->alist *max-tries-hash*))

	  (debug:print-info 4 *default-log-port* "Exiting loop with...\n  hed=" hed "\n  tal=" tal "\n  reruns=" reruns))
	 )))
    ;; now *if* -run-wait we wait for all tests to be done
    ;; Now wait for any RUNNING tests to complete (if in run-wait mode)
    (thread-sleep! 5) ;; I think there is a race condition here. Let states/statuses settle
    (let wait-loop ((num-running      (rmt:get-count-tests-running-for-run-id run-id))
		    (prev-num-running 0))
      ;; (debug:print-info 13 *default-log-port* "num-running=" num-running ", prev-num-running=" prev-num-running)
      (if (and (or (args:get-arg "-run-wait")
		   (equal? (configf:lookup *configdat* "setup" "run-wait") "yes"))
	       (> num-running 0))
	  (begin
	    ;; Here we mark any old defunct tests as incomplete. Do this every fifteen minutes
	    ;; (debug:print 0 *default-log-port* "Got here eh! num-running=" num-running " (> num-running 0) " (> num-running 0))
	    (if (> (current-seconds)(+ last-time-incomplete 900))

(define (runs:calc-runnable prereqs-not-met)
  (filter 
   (lambda (t)
     (or (not (vector? t))
	 (and (equal? "NOT_STARTED" (db:test-get-state t))
	      (member (db:test-get-status t)
		      '("n/a" "KEEP_TRYING")))
	 (and (equal? "RUNNING" (db:test-get-state t))))) ;; account for a test that is running
   prereqs-not-met))

(define (runs:pretty-string lst)
  (map (lambda (t)
	 (if (not (vector? t))
	     (conc t)
	     (conc (db:test-get-testname t) ":" (db:test-get-state t) "/" (db:test-get-status t))))

			(configf:lookup test-conf "skip" "prevrunning"))
		   ;; run-ids = #f means *all* runs
		   (let ((running-tests (rmt:get-tests-for-runs-mindata #f full-test-name '("RUNNING" "REMOTEHOSTSTART" "LAUNCHED") '() #f)))
		     (if (not (null? running-tests)) ;; have to skip 
			 (set! skip-test "Skipping due to previous tests running"))))
		  ((and skip-check
			(configf:lookup test-conf "skip" "fileexists"))
		   (if (common:file-exists? (configf:lookup test-conf "skip" "fileexists"))
		       (set! skip-test (conc "Skipping due to existance of file " (configf:lookup test-conf "skip" "fileexists")))))

		  ((and skip-check
			(configf:lookup test-conf "skip" "rundelay"))
		   ;; run-ids = #f means *all* runs
		   (let* ((numseconds      (common:hms-string->seconds (configf:lookup test-conf "skip" "rundelay")))
			  (running-tests   (rmt:get-tests-for-runs-mindata #f full-test-name '("RUNNING" "REMOTEHOSTSTART" "LAUNCHED") '() #f))
			  (completed-tests (rmt:get-tests-for-runs-mindata #f full-test-name '("COMPLETED" "INCOMPLETE") '("PASS" "FAIL" "ABORT") #f)) ;; ironically INCOMPLETE is same as COMPLETED in this contex
			  (last-run-times  (map db:mintest-get-event_time completed-tests))

;;    'set-state-status
;;
;; NB// should pass in keys?
;;
(define (runs:operate-on action target runnamepatt testpatt #!key (state #f)(status #f)(new-state-status #f)(mode 'remove-all)(options '()))
  (common:clear-caches) ;; clear all caches
  (let* ((db           #f)
	 ;; (tdbdat       (tasks:open-db))
	 (keys         (rmt:get-keys))
	 (rundat       (mt:get-runs-by-patt keys runnamepatt target))
	 (header       (vector-ref rundat 0))
	 (runs         (vector-ref rundat 1))
	 (states       (if state  (string-split state  ",") '()))
	 (statuses     (if status (string-split status ",") '()))
	 (state-status (if (string? new-state-status) (string-split new-state-status ",") '(#f #f)))
	 (rp-mutex     (make-mutex))
	 (bup-mutex    (make-mutex)))

    (let* ((write-access-actions '(remove-runs set-state-status archive run-wait))
           (dbfile             (conc  *toppath* "/megatest.db"))
           (readonly-mode      (not (file-write-access? dbfile))))
      (when (and readonly-mode
                 (member action write-access-actions))
        (debug:print-error 0 *default-log-port* "megatest.db is readonly.  Cannot proceed with action ["action"] in which write-access isrequired .")
        (exit 1)))

    
    (debug:print-info 4 *default-log-port* "runs:operate-on => Header: " header " action: " action " new-state-status: " new-state-status)
    (if (> 2 (length state-status))
	(begin
	  (debug:print-error 0 *default-log-port* "the parameter to -set-state-status is a comma delimited string. E.g. COMPLETED,FAIL")
	  (exit)))
    (for-each
     (lambda (run)

		    ;; seek and kill in flight -runtests with % as testpatt here
		    ;; (if (equal? testpatt "%")
		    (tasks:kill-runner target run-name testpatt)
		    
		    ;; (debug:print 0 *default-log-port* "not attempting to kill any run launcher processes as testpatt is " testpatt))
		    (debug:print 1 *default-log-port* "Removing tests for run: " runkey " " (db:get-value-by-header run header "runname")))
		   ((set-state-status)
		    ;; (if (tasks:need-server run-id)(tasks:start-and-wait-for-server tdbdat run-id 10))
		    (debug:print 1 *default-log-port* "Modifying state and staus for tests for run: " runkey " " (db:get-value-by-header run header "runname")))
		   ((print-run)
		    (debug:print 1 *default-log-port* "Printing info for run " runkey ", run=" run ", tests=" tests ", header=" header)
		    action)
		   ((run-wait)
		    (debug:print 1 *default-log-port* "Waiting for run " runkey ", run=" runnamepatt " to complete"))
		   ((archive)

	(if (launch:setup)
	    (begin
	      (full-runconfigs-read) ;; cache the run config
	      (launch:cache-config)) ;; do not cache here - need to be sure runconfigs is processed
	    (begin 
	      (debug:print 0 *default-log-port* "Failed to setup, exiting")
	      (exit 1)))

        
	(set! keys (keys:config-get-fields *configdat*))
	;; have enough to process -target or -reqtarg here
	(if (args:get-arg "-reqtarg")
	    (let* ((runconfigf (conc  *toppath* "/runconfigs.config")) ;; DO NOT EVALUATE ALL 
		   (runconfig  (read-config runconfigf #f #t environ-patt: #f)))
	      (if (hash-table-ref/default runconfig (args:get-arg "-reqtarg") #f)
		  (keys:target-set-args keys (args:get-arg "-reqtarg") args:arg-hash)

	     (conc "INSERT OR REPLACE INTO test_data (test_id,category,variable,value,expected,tol,units,comment) "
		   "SELECT " (db:test-get-id new-testdat) ",category,variable,value,expected,tol,units,comment FROM test_data WHERE test_id=?;")
	     (db:test-get-id testdat))))
	 ))
     prev-tests)))
	 
     
;; clean cache files
(define (runs:clean-cache target runname toppath)
  (if target
      (if runname
	  (let* ((linktree (common:get-linktree)) ;; (if toppath (configf:lookup *configdat* "setup" "linktree")))
		 (runtop   (conc linktree "/" target "/" runname))
		 (files    (if (file-exists? runtop)
			       (append (glob (conc runtop "/.megatest*"))
				       (glob (conc runtop "/.runconfig*")))
			       '())))
	    (if (null? files)
		(debug:print-info 0 *default-log-port* "No cached megatest or runconfigs files found. None removed.")
		(begin
		  (debug:print-info 0 *default-log-port* "Removing cached files:\n    " (string-intersperse files "\n    "))
		  (for-each 
		   (lambda (f)
		     (handle-exceptions
			 exn
			 (debug:print 0 *default-log-port* "WARNING: Failed to remove file " f)
		       (delete-file f)))
		   files))))
	  (debug:print-error 0 *default-log-port* "-clean-cache requires -runname."))
      (debug:print-error 0 *default-log-port* "-clean-cache requires -target or -reqtarg")))