Megatest

(declare (uses db))
(declare (uses tests))
(declare (uses tasks)) ;; tasks are where stuff is maintained about what is running.
(declare (uses server))
;; (declare (uses daemon))
(declare (uses portlogger))
(declare (uses rmt))
(declare (uses dbfile))
(declare (uses commonmod))

(include "common_records.scm")
(include "db_records.scm")
(include "js-path.scm")

(import dbfile commonmod)

(require-library stml)
(define (http-transport:make-server-url hostport)
  (if (not hostport)
      #f
      (conc "http://" (car hostport) ":" (cadr hostport))))

				 ;; This is were we set up the database connections
			       (let* (($   (request-vars source: 'both))
				      (dat ($ 'dat))
				      (res #f))
				 (cond
				  ((equal? (uri-path (request-uri (current-request)))
					   '(/ "api"))
				   (send-response body:    (api:process-request *dbstruct-dbs* $) ;; the $ is the request vars proc
						  headers: '((content-type text/plain)))
				   (mutex-lock! *heartbeat-mutex*)
				   (set! *db-last-access* (current-seconds))
				   (mutex-unlock! *heartbeat-mutex*))
				  ((equal? (uri-path (request-uri (current-request))) 
					   '(/ ""))
				   (send-response body: (http-transport:main-page)))

      ;; any error in following steps will result in a retry
      (set! *server-info* (list ipaddrstr portnum))
      (debug:print 0 *default-log-port* "INFO: Trying to start server on " ipaddrstr ":" portnum)
      ;; This starts the spiffy server
      ;; NEED WAY TO SET IP TO #f TO BIND ALL
      ;; (start-server bind-address: ipaddrstr port: portnum)
      (if config-hostname ;; this is a hint to bind directly
	  (start-server port: portnum) ;; bind-address: (if (equal? config-hostname "-")
					;;		ipaddrstr
					;;		config-hostname))
	  (start-server port: portnum))
      (portlogger:open-run-close portlogger:set-port portnum "released")
      (debug:print 1 *default-log-port* "INFO: server has been stopped"))))

;;======================================================================
;; S E R V E R   U T I L I T I E S 
;;======================================================================

                                                (if (debug:debug-mode 1)
                                                    (debug:print-info 0 *default-log-port* "couldn't talk to server, trying again ...")
                                                    (begin
                                                      (debug:print 0 *default-log-port* "WARNING: failure in with-input-from-request to " fullurl ".")
                                                      (debug:print 0 *default-log-port* " message: " msg ", exn=" exn)
                                                      (debug:print 0 *default-log-port* " cmd: " cmd " params: " params " key:" (or server-id "thekey"))
                                                      (debug:print 0 *default-log-port* " call-chain: " call-chain)))
						(set! *runremote* #f)
						(set! runremote #f)
						;; (if runremote
						;;    (remote-conndat-set! runremote #f))
						;; Killing associated server to allow clean retry.")
						;; (tasks:kill-server-run-id run-id)  ;; better to kill the server in the logic that called this routine?
						(mutex-unlock! *http-mutex*)
						;; (signal (make-composite-condition
						;;          (make-property-condition 'commfail 'message "failed to connect to server")))
						;; "communications failed"
						(db:obj->string #f))
					      (with-input-from-request ;; was dat
					       fullurl 
					       (list (cons 'key (or server-id   "thekey"))
						     (cons 'cmd cmd)
						     (cons 'params sparams))
					       read-string))
					  transport: 'http)
					 0)) ;; added this speculatively
			      ;; Shouldn't this be a call to the managed call-all-connections stuff above?
			      (close-all-connections!) ;; BUG? WHY IS THIS HERE? Are we failing to reuse connections?
			      (mutex-unlock! *http-mutex*)
			      ))
	      (time-out     (lambda ()
			      (thread-sleep! 45)
			      (debug:print 0 *default-log-port* "WARNING: send-receive took more than 45 seconds!!")
			      #f))
	      (th1 (make-thread send-recieve "with-input-from-request"))

;;
(define (http-transport:client-connect iface port server-id) 
  (let* ((api-url      (conc "http://" iface ":" port "/api"))
	 (api-uri      (uri-reference (conc "http://" iface ":" port "/api")))
	 (api-req      (make-request method: 'POST uri: api-uri))
	 (server-dat   (vector iface port api-uri api-url api-req (current-seconds) server-id)))
    server-dat))




;; run http-transport:keep-running in a parallel thread to monitor that the db is being 
;; used and to shutdown after sometime if it is not.
;;
(define (http-transport:keep-running) 
  ;; if none running or if > 20 seconds since 
  ;; server last used then start shutdown
  ;; This thread waits for the server to come alive
  (debug:print-info 0 *default-log-port* "Starting the sync-back, keep alive thread in server")
  (let* ((sdat              #f)
	 (no-sync-db        (db:open-no-sync-db))
	 (tmp-area          (common:get-db-tmp-area))
	 (started-file      (conc tmp-area "/.server-started"))
	 (server-start-time (current-seconds))
	 (server-info (let loop ((start-time (current-seconds))
				 (changed    #t)
				 (last-sdat  "not this"))
                        (begin ;; let ((sdat #f))

      (debug:print 0 *default-log-port* "Failed to create " started-file ", exn=" exn)
      (with-output-to-file started-file (lambda ()(print (current-process-id)))))

    (let loop ((count         0)
	       (server-state 'available)
	       (bad-sync-count 0)
	       (start-time     (current-milliseconds)))

      ;; Use this opportunity to sync the tmp db to megatest.db
      (if (not server-going) ;; *dbstruct-dbs* 
	  (begin
	    (debug:print 0 *default-log-port* "SERVER: dbprep")
	    (set! *dbstruct-dbs*  (db:setup #t)) ;;  run-id)) FIXME!!!
	    (set! server-going #t)
	    (debug:print 0 *default-log-port* "SERVER: running, megatest version: " (common:get-full-version)) ;; NOTE: the server is NOT yet marked as running in the log. We do that in the keep-running routine.

	    ;; (thread-start! *watchdog*)
          ) 
	  (if (and no-sync-db
		   (common:low-noise-print 5 "sync-all")) ;; cheesy way to reduce frequency of running sync :)
              (begin
                (debug:print 0 *default-log-port* "keep-running calling db:all-db-sync at " (time->string (seconds->local-time) "%H:%M:%S"))
                (db:all-db-sync *dbstruct-dbs*)
                ;; (db:do-sync no-sync-db)
	        ;; (db:run-lock-and-sync *no-sync-db*)
              )
          )
      )
      
      ;; when things go wrong we don't want to be doing the various queries too often
      ;; so we strive to run this stuff only every four seconds or so.
      (let* ((sync-time (- (current-milliseconds) start-time))
	    (rem-time  (quotient (- 4000 sync-time) 1000)))
	(if (and (<= rem-time 4)
		 (>  rem-time 0))

	  (let ((new-iface (car sdat))
		(new-port  (cadr sdat)))
	    (debug:print-info 0 *default-log-port* "WARNING: interface changed, refreshing iface and port info")
	    (set! iface new-iface)
	    (set! port  new-port)
             (if (not *server-id*)
              (set! *server-id* (server:mk-signature)))

	    (debug:print 0 *default-log-port* "SERVER STARTED: " iface ":" port " AT " (current-seconds) " server-id: " *server-id*)
	    (flush-output *default-log-port*)))
      
      ;; Transfer *db-last-access* to last-access to use in checking that we are still alive
      (mutex-lock! *heartbeat-mutex*)
      (set! last-access *db-last-access*)
      (mutex-unlock! *heartbeat-mutex*)
      
      (if (common:low-noise-print 120 (conc "server running on " iface ":" port))
	  (begin
             (if (not *server-id*)
		 (set! *server-id* (server:mk-signature)))
             (debug:print 0 *default-log-port* (current-seconds) (current-directory) (current-process-id) (argv))   
	     (debug:print 0 *default-log-port* "SERVER STARTED: " iface ":" port " AT " (current-seconds) " server-id: " *server-id*)
	     (flush-output *default-log-port*)))
      (if (common:low-noise-print 60 "dbstats")
	  (begin
	    (debug:print 0 *default-log-port* "Server stats:")
	    (db:print-current-query-stats)))
      (let* ((hrs-since-start  (/ (- (current-seconds) server-start-time) 3600)))
	(cond
	 #;((and *server-run*
	       (> (- (current-seconds) server-start-time) 420)) ;; let's try server replacement
	  ;; ((adj-proc-load . 0.056875) (adj-core-load . 0.11375) (1m-load . 0.91) (5m-load . 0.77) (15m-load . 1.0) (proc . 16) (core . 8) (phys . 1))
	  (let* ((loaddat       (common:get-normalized-cpu-load #f))
		 (adj-proc-load (alist-ref 'adj-proc-load loaddat))
		 (adj-core-load (alist-ref 'adj-core-load loaddat))
		 (adj-load      (max adj-proc-load adj-core-load)))
	    (if (< adj-load 2) ;; reduce chance of runaway
		(server:run *toppath*))
	    (db:all-db-sync *dbstruct-dbs*)
	    (thread-sleep! 30)
	    (http-transport:server-shutdown port)))
         ((and *server-run*
	       (> (+ last-access server-timeout)
		  (current-seconds)))
          (if (common:low-noise-print 120 "server continuing")
              (debug:print-info 0 *default-log-port* "Server continuing, seconds since last db access: " (- (current-seconds) last-access))
	      (let ((curr-time (current-seconds)))
		(handle-exceptions
		    exn
		    (debug:print 0 *default-log-port* "ERROR: Failed to change timestamp on log file " server-log-file ". Are you out of space on that disk? exn=" exn)
		    (if (and (< (- (current-seconds) server-start-time) 600) ;; run for ten minutes for experiment, 3600 thereafter
			     (not *server-overloaded*))
			(change-file-times server-log-file curr-time curr-time)
			(if (common:low-noise-print 120 "start new server")
			    (server:kind-run *toppath*) ;; server:kind-run uses [servers] numservers
			)))))
          (loop 0 server-state bad-sync-count (current-milliseconds)))
         (else
          (debug:print-info 0 *default-log-port* "Server timed out. seconds since last db access: " (- (current-seconds) last-access))
          (http-transport:server-shutdown port)))))))

(define (http-transport:server-shutdown port)
  (begin