Megatest

    ))

;;======================================================================
;; T E S T   S P E C I F I C   D B 
;;======================================================================

;; Create the sqlite db for the individual test(s)
(define (open-test-db work-area) 
  (debug:print-info 11 "open-test-db " work-area)
  (if (and work-area 
	   (directory? work-area)
	   (file-read-access? work-area))
      (let* ((dbpath    (conc work-area "/testdat.db"))
	     (dbexists  (file-exists? dbpath))
	     (handler   (make-busy-timeout (if (args:get-arg "-override-timeout")
					       (string->number (args:get-arg "-override-timeout"))
					       136000))))
	(handle-exceptions
	 exn
	 (begin
	   (debug:print 0 "ERROR: problem accessing test db " work-area ", you probably should clean and re-run this test"
			((condition-property-accessor 'exn 'message) exn))
	   #f)
	 (set! db (sqlite3:open-database dbpath)))
	(sqlite3:set-busy-handler! db handler)
	(if (not dbexists)
	    (begin
	      (sqlite3:execute db "PRAGMA synchronous = FULL;")
	      (debug:print-info 11 "Initialized test database " dbpath)
	      (db:testdb-initialize db)))
	;; (sqlite3:execute db "PRAGMA synchronous = 0;")
	(debug:print-info 11 "open-test-db END (sucessful)" work-area)
	;; now let's test that everything is correct
	(handle-exceptions
	 exn
	 (begin
	   (debug:print 0 "ERROR: problem accessing test db " work-area ", you probably should clean and re-run this test"
			((condition-property-accessor 'exn 'message) exn))
	   #f)
	 ;; Is there a cheaper single line operation that will check for existance of a table
	 ;; and raise an exception ?
	 (sqlite3:execute db "SELECT id FROM test_data LIMIT 1;"))
	db)
      (begin
	(debug:print-info 11 "open-test-db END (unsucessful)" work-area)
	#f)))

;; find and open the testdat.db file for an existing test
(define (db:open-test-db-by-test-id db test-id #!key (work-area #f))
  (let* ((test-path (if work-area
			work-area
			(cdb:remote-run db:test-get-rundir-from-test-id db test-id))))
    (debug:print 3 "TEST PATH: " test-path)
    (open-test-db test-path)))

(define (db:testdb-initialize db)
  (debug:print 11 "db:testdb-initialize START")
  (for-each
   (lambda (sqlcmd)

     db 
     qry
     )
    (debug:print-info 11 "db:get-tests-for-run START run-ids=" run-ids ", testpatt=" testpatt ", states=" states ", statuses=" statuses ", not-in=" not-in ", sort-by=" sort-by)
    res))

;; this one is a bit broken BUG FIXME
(define (db:delete-test-step-records db test-id #!key (work-area #f))
  ;; Breaking it into two queries for better file access interleaving
  (let* ((tdb (db:open-test-db-by-test-id db test-id work-area: work-area)))
    ;; test db's can go away - must check every time
    (if tdb
	(begin
	  (sqlite3:execute tdb "DELETE FROM test_steps;")
	  (sqlite3:execute tdb "DELETE FROM test_data;")
	  (sqlite3:finalize! tdb)))))

     run-id testname item-path)
    res))

(define db:get-test-id db:get-test-id-not-cached)

;; given a test-info record, patch in the latest data from the testdat.db file
;; found in the test run directory
;;
;; NOT USED
;;
(define (db:patch-tdb-data-into-test-info db test-id res #!key (work-area #f))
  (let ((tdb (db:open-test-db-by-test-id db test-id work-area: work-area)))
    ;; get state and status from megatest.db in real time
    ;; other fields that perhaps should be updated:
    ;;   fail_count
    ;;   pass_count
    ;;   final_logf
    (sqlite3:for-each-row
     (lambda (state status final_logf)

	 (debug:print-info 11 "Sent " zdat ", received " rawdat)
	 (set! tmp (db:string->obj rawdat))
	 (vector-ref tmp 2))))
    ((zmq)
     (handle-exceptions
      exn
      (begin
	(debug:print-info 0 "cdb:client-call timeout or error. Trying again in 5 seconds")
	(thread-sleep! 5) 
	(if (> numretries 0)(apply cdb:client-call serverdat qtype immediate (- numretries 1) params)))
      (let* ((push-socket (vector-ref serverdat 0))
	     (sub-socket  (vector-ref serverdat 1))
	     (client-sig  (client:get-signature))
	     (query-sig   (message-digest-string (md5-primitive) (conc qtype immediate params)))
	     (zdat        (db:obj->string (vector client-sig qtype immediate query-sig params (current-seconds)))) ;; (with-output-to-string (lambda ()(serialize params))))

			       ;; this should match (client:get-signature)
			       ;; we will need to process "all" messages here some day
			       (receive-message* sub-socket)
			       ;; now get the actual message
			       (let ((myres (db:string->obj (receive-message* sub-socket))))
				 (if (equal? query-sig (vector-ref myres 1))
				     (set! res (vector-ref myres 2))
				     (loop)))))))
	    ;; (timeout (lambda ()
	    ;;     	(let loop ((n numretries))
	    ;;     	  (thread-sleep! 15)
	    ;;     	  (if (not res)
	    ;;     	      (if (> numretries 0)
	    ;;     		  (begin
	    ;;     		    (debug:print 2 "WARNING: no reply to query " params ", trying resend")
	    ;;     		    (debug:print-info 11 "re-sending message")
	    ;;     		    (send-message push-socket zdat)
	    ;;     		    (debug:print-info 11 "message re-sent")
	    ;;     		    (loop (- n 1)))
	    ;;     		  ;; (apply cdb:client-call *runremote* qtype immediate (- numretries 1) params))
	    ;;     		  (begin
	    ;;     		    (debug:print 0 "ERROR: cdb:client-call timed out " params ", exiting.")
	    ;;     		    (exit 5))))))))
	(debug:print-info 11 "Starting threads")
	(let ((th1 (make-thread send-receive "send receive"))
	      ;; (th2 (make-thread timeout      "timeout"))
	      )
	  (thread-start! th1)
	  ;; (thread-start! th2)
	  (thread-join!  th1)
	  (debug:print-info 11 "cdb:client-call returning res=" res)
	  res))))))
  
(define (cdb:set-verbosity serverdat val)
  (cdb:client-call serverdat 'set-verbosity #f *default-numtries* val))

       (set! res (cons (vector id itempath state status run_duration logf comment) res)))
     db
     "SELECT id,item_path,state,status,run_duration,final_logf,comment FROM tests WHERE run_id=? AND testname=? AND item_path != '';"
     run-id test-name)
    res))

;; Rollup the pass/fail counts from itemized tests into fail_count and pass_count
;; NOTE: Is this duplicating (db:test-data-rollup db test-id status) ????
(define (db:roll-up-pass-fail-counts db run-id test-name item-path status)
  ;; (cdb:flush-queue *runremote*)
  (if (and (not (equal? item-path ""))
	   (member status '("PASS" "WARN" "FAIL" "WAIVED" "RUNNING" "CHECK" "SKIP")))
      (begin
	(sqlite3:execute 
	 db

(define (db:testmeta-update-field db testname field value)
  (sqlite3:execute db (conc "UPDATE test_meta SET " field "=? WHERE testname=?;") value testname))

;;======================================================================
;; T E S T   D A T A 
;;======================================================================

(define (db:csv->test-data db test-id csvdata #!key (work-area #f))
  (debug:print 4 "test-id " test-id ", csvdata: " csvdata)
  (let ((tdb     (db:open-test-db-by-test-id db test-id work-area: work-area)))
    (if tdb
	(let ((csvlist (csv->list (make-csv-reader
				   (open-input-string csvdata)
				   '((strip-leading-whitespace? #t)
				     (strip-trailing-whitespace? #t)) )))) ;; (csv->list csvdata)))
	  (for-each 
	   (lambda (csvrow)

			       ((<)  (if (<  value expected) "pass" "fail"))
			       ((>=) (if (>= value expected) "pass" "fail"))
			       ((<=) (if (<= value expected) "pass" "fail"))
			       (else (conc "ERROR: bad tol comparator " tol))))))
	       (debug:print 4 "AFTER2: category: " category " variable: " variable " value: " value 
			    ", expected: " expected " tol: " tol " units: " units " status: " status " comment: " comment)
	       (sqlite3:execute tdb "INSERT OR REPLACE INTO test_data (test_id,category,variable,value,expected,tol,units,comment,status,type) VALUES (?,?,?,?,?,?,?,?,?,?);"
				test-id category variable value expected tol units (if comment comment "") status type)))
	   csvlist)
	  (sqlite3:finalize! tdb)))))


;; get a list of test_data records matching categorypatt
(define (db:read-test-data db test-id categorypatt #!key (work-area #f))
  (let ((tdb  (db:open-test-db-by-test-id db test-id work-area: work-area)))
    (if tdb
	(let ((res '()))
	  (sqlite3:for-each-row 
	   (lambda (id test_id category variable value expected tol units comment status type)
	     (set! res (cons (vector id test_id category variable value expected tol units comment status type) res)))
	   tdb
	   "SELECT id,test_id,category,variable,value,expected,tol,units,comment,status,type FROM test_data WHERE test_id=? AND category LIKE ? ORDER BY category,variable;" test-id categorypatt)
	  (sqlite3:finalize! tdb)
	  (reverse res))
	'())))

;; NOTE: Run this local with #f for db !!!
(define (db:load-test-data db test-id #!key (work-area #f))
  (let loop ((lin (read-line)))
    (if (not (eof-object? lin))
	(begin
	  (debug:print 4 lin)
	  (db:csv->test-data db test-id lin work-area: work-area)
	  (loop (read-line)))))
  ;; roll up the current results.
  ;; FIXME: Add the status to 
  (db:test-data-rollup db test-id #f work-area: work-area))

;; WARNING: Do NOT call this for the parent test on an iterated test
;; Roll up test_data pass/fail results
;; look at the test_data status field, 
;;    if all are pass (any case) and the test status is PASS or NULL or '' then set test status to PASS.
;;    if one or more are fail (any case) then set test status to PASS, non "pass" or "fail" are ignored
(define (db:test-data-rollup db test-id status #!key (work-area #f))
  (let ((tdb (db:open-test-db-by-test-id db test-id work-area: work-area))
	(fail-count 0)
	(pass-count 0))
    (if tdb
	(begin
	  (sqlite3:for-each-row
	   (lambda (fcount pcount)
	     (set! fail-count fcount)

;; S T E P S 
;;======================================================================

(define (db:step-get-time-as-string vec)
  (seconds->time-string (db:step-get-event_time vec)))

;; db-get-test-steps-for-run
(define (db:get-steps-for-test db test-id #!key (work-area #f))
  (let* ((tdb (db:open-test-db-by-test-id db test-id work-area: work-area))
	 (res '()))
    (if tdb
	(begin
	  (sqlite3:for-each-row 
	   (lambda (id test-id stepname state status event-time logfile)
	     (set! res (cons (vector id test-id stepname state status event-time (if (string? logfile) logfile "")) res)))
	   tdb
	   "SELECT id,test_id,stepname,state,status,event_time,logfile FROM test_steps WHERE test_id=? ORDER BY id ASC;" ;; event_time DESC,id ASC;
	   test-id)
	  (sqlite3:finalize! tdb)
	  (reverse res))
	'())))

;; get a pretty table to summarize steps
;;
(define (db:get-steps-table db test-id #!key (work-area #f))
  (let ((steps   (db:get-steps-for-test db test-id work-area: work-area)))
    ;; organise the steps for better readability
    (let ((res (make-hash-table)))
      (for-each 
       (lambda (step)
	 (debug:print 6 "step=" step)
	 (let ((record (hash-table-ref/default 
			res 

		      ((eq? (db:step-get-event_time a)(db:step-get-event_time b)) 
		       (<   (db:step-get-id a)        (db:step-get-id b)))
		      (else #f)))))
      res)))

;; get a pretty table to summarize steps
;;
(define (db:get-steps-table-list db test-id #!key (work-area #f))
  (let ((steps   (db:get-steps-for-test db test-id work-area: work-area)))
    ;; organise the steps for better readability
    (let ((res (make-hash-table)))
      (for-each 
       (lambda (step)
	 (debug:print 6 "step=" step)
	 (let ((record (hash-table-ref/default 
			res 

	     ;; if the test is not found then clearly the waiton is not met...
	     ;; (if (not ever-seen)(set! result (cons waitontest-name result)))))
	     (if (not ever-seen)
		 (set! result (append (if (null? tests)(list waitontest-name) tests) result)))))
	 waitons)
	(delete-duplicates result))))

(define (db:teststep-set-status! db test-id teststep-name state-in status-in comment logfile #!key (work-area #f))
  (debug:print 4 "test-id: " test-id " teststep-name: " teststep-name)
  ;;                 db:open-test-db-by-test-id does cdb:remote-run
  (let* ((tdb       (db:open-test-db-by-test-id db test-id work-area: work-area))
	 (state     (items:check-valid-items "state" state-in))
	 (status    (items:check-valid-items "status" status-in)))
    (if (or (not state)(not status))
	(debug:print 3 "WARNING: Invalid " (if status "status" "state")
		     " value \"" (if status state-in status-in) "\", update your validvalues section in megatest.config"))
    (if tdb
	(begin