Megatest

   "logs"))

;; Force a megatest cleanup-db if version is changed and skip-version-check not specified
;;
(define (common:exit-on-version-changed)
  (if (common:version-changed?)
      (if (common:on-homehost?)
	  (let* ((mtconf (conc (get-environment-variable "MT_RUN_AREA_HOME") "/megatest.config"))
                (dbfile (conc (get-environment-variable "MT_RUN_AREA_HOME") "/megatest.db"))
                (read-only (not (file-write-access? dbfile)))
                (dbstruct (db:setup)))
	    (debug:print 0 *default-log-port*
			 "WARNING: Version mismatch!\n"
			 "   expected: " (common:version-signature) "\n"
			 "   got:      " (common:get-last-run-version))
            (cond
             ((get-environment-variable "MT_SKIP_DB_MIGRATE") #t)
             ((and (file-exists? mtconf) (file-exists? dbfile) (not read-only)
                   (eq? (current-user-id)(file-owner mtconf))) ;; safe to run -cleanup-db

              (debug:print 0 *default-log-port* "   I see you are the owner of megatest.config, attempting to cleanup and reset to new version")
              (handle-exceptions
               exn
               (begin
                 (debug:print 0 *default-log-port* "Failed to switch versions.")
                 (debug:print 0 *default-log-port* " message: " ((condition-property-accessor 'exn 'message) exn))
                 (print-call-chain (current-error-port))
                 (exit 1))
               (common:cleanup-db dbstruct)))
             ((not (file-exists? mtconf))
              (debug:print 0 *default-log-port* "   megatest.config does not exist in this area.  Cannot proceed with megatest version migration.")
              (exit 1))
             ((not (file-exists? dbfile))
              (debug:print 0 *default-log-port* "   megatest.db does not exist in this area.  Cannot proceed with megatest version migration.")
              (exit 1))
             ((not (eq? (current-user-id)(file-owner mtconf)))
              (debug:print 0 *default-log-port* "   You do not own megatest.db in this area.  Cannot proceed with megatest version migration.")
              (exit 1))
             (read-only
              (debug:print 0 *default-log-port* "   You have read-only access to this area.  Cannot proceed with megatest version migration.")
              (exit 1))
             (else
              (debug:print 0 *default-log-port* " to switch versions you can run: \"megatest -cleanup-db\"")
              (exit 1))))
	  (begin
	    (debug:print 0 *default-log-port* "ERROR: cannot migrate version unless on homehost. Exiting.")
	    (exit 1)))))

;;======================================================================
;; S P A R S E   A R R A Y S
;;======================================================================

    (if val val default)))

(define (assoc/default key lst . default)
  (let ((res (assoc key lst)))
    (if res (cadr res)(if (null? default) #f (car default)))))

(define (common:get-testsuite-name)
  (or (configf:lookup *configdat* "setup" "area-name") ;; megatest is a flexible tool, testsuite is too limiting a description.
      (configf:lookup *configdat* "setup" "testsuite" )
      (if *toppath* 
          (pathname-file *toppath*)
          (pathname-file (current-directory)))))

(define common:get-area-name common:get-testsuite-name)

(define (common:get-db-tmp-area)
  (if *db-cache-path*
      *db-cache-path*
      (let ((dbpath (create-directory (conc "/tmp/" (current-user-name)
					    "/megatest_localdb/"
					    (common:get-testsuite-name) "/"
					    (string-translate *toppath* "/" ".")) #t)))
	(set! *db-cache-path* dbpath)
	dbpath)))

(define (common:get-area-path-signature)
  (message-digest-string (md5-primitive) *toppath*))

(define (common:get-signature str)
  (message-digest-string (md5-primitive) str))

;;======================================================================
;; E X I T   H A N D L I N G
;;======================================================================

(define (common:run-sync?)
    (and (common:on-homehost?)
	 (args:get-arg "-server")))

(define *wdnum* 0)
(define *wdnum*mutex (make-mutex))
;; currently the primary job of the watchdog is to run the sync back to megatest.db from the db in /tmp
;; if we are on the homehost and we are a server (by definition we are on the homehost if we are a server)
;;


(define (common:readonly-watchdog dbstruct)
  (thread-sleep! 0.05) ;; delay for startup
  (debug:print-info 13 *default-log-port* "common:readonly-watchdog entered.")
  ;; sync megatest.db to /tmp/.../megatst.db
  (let* ((sync-cool-off-duration   3)
        (golden-mtdb     (dbr:dbstruct-mtdb dbstruct))
        (golden-mtpath   (db:dbdat-get-path golden-mtdb))
        (tmp-mtdb        (dbr:dbstruct-tmpdb dbstruct))
        (tmp-mtpath      (db:dbdat-get-path tmp-mtdb)))
    (debug:print-info 0 *default-log-port* "Read-only periodic sync thread started.")
    (let loop ((last-sync-time 0))
      (debug:print-info 13 *default-log-port* "loop top tmp-mtpath="tmp-mtpath" golden-mtpath="golden-mtpath)
      (let* ((duration-since-last-sync (- (current-seconds) last-sync-time)))
        (debug:print-info 13 *default-log-port* "duration-since-last-sync="duration-since-last-sync)
        (if (and (not *time-to-exit*)
                 (< duration-since-last-sync sync-cool-off-duration))
            (thread-sleep! (- sync-cool-off-duration duration-since-last-sync)))
        (if (not *time-to-exit*)
            (let ((golden-mtdb-mtime (file-modification-time golden-mtpath))
                  (tmp-mtdb-mtime    (file-modification-time tmp-mtpath)))
              (if (> golden-mtdb-mtime tmp-mtdb-mtime)
                  (let ((res (db:multi-db-sync dbstruct 'old2new)))
                    (debug:print-info 13 *default-log-port* "rosync called, " res " records transferred.")))
              (loop (current-seconds)))
            #t)))
    (debug:print-info 0 *default-log-port* "Exiting readonly-watchdog timer, *time-to-exit* = " *time-to-exit*" pid="(current-process-id)" mtpath="golden-mtpath)))


        
(define (common:writable-watchdog dbstruct)
  (thread-sleep! 0.05) ;; delay for startup
  (let ((legacy-sync (common:run-sync?))
	(debug-mode  (debug:debug-mode 1))
	(last-time   (current-seconds))
        (this-wd-num     (begin (mutex-lock! *wdnum*mutex) (let ((x *wdnum*)) (set! *wdnum* (add1 *wdnum*)) (mutex-unlock! *wdnum*mutex) x))))
    (debug:print-info 2 *default-log-port* "Periodic sync thread started.")
    (debug:print-info 3 *default-log-port* "watchdog starting. legacy-sync is " legacy-sync" pid="(current-process-id)" this-wd-num="this-wd-num)
    (if (and legacy-sync (not *time-to-exit*))
	(let* (;;(dbstruct (db:setup))
	       (mtdb     (dbr:dbstruct-mtdb dbstruct))
	       (mtpath   (db:dbdat-get-path mtdb)))
	  (debug:print-info 0 *default-log-port* "Server running, periodic sync started.")
	  (let loop ()
	    ;; sync for filesystem local db writes
	    ;;
	    (mutex-lock! *db-multi-sync-mutex*)
	    (let* ((need-sync        (>= *db-last-access* *db-last-sync*)) ;; no sync since last write
		   (sync-in-progress *db-sync-in-progress*)
		   (should-sync      (and (not *time-to-exit*)
                                          (> (- (current-seconds) *db-last-sync*) 5))) ;; sync every five seconds minimum
		   (start-time       (current-seconds))
		   (mt-mod-time      (file-modification-time mtpath))
		   (recently-synced  (< (- start-time mt-mod-time) 4))
		   (will-sync        (and (or need-sync should-sync)
					  (not sync-in-progress)
					  (not recently-synced))))
              (debug:print-info 13 *default-log-port* "WD writable-watchdog top of loop.  need-sync="need-sync" sync-in-progress="sync-in-progress" should-sync="should-sync" start-time="start-time" mt-mod-time="mt-mod-time" recently-synced="recently-synced" will-sync="will-sync)
	      ;; (if recently-synced (debug:print-info 0 *default-log-port* "Skipping sync due to recently-synced flag=" recently-synced))
	      ;; (debug:print-info 0 *default-log-port* "need-sync: " need-sync " sync-in-progress: " sync-in-progress " should-sync: " should-sync " will-sync: " will-sync)
	      (if will-sync (set! *db-sync-in-progress* #t))
	      (mutex-unlock! *db-multi-sync-mutex*)
	      (if will-sync
		  (let ((res (common:sync-to-megatest.db dbstruct))) ;; did we sync any data? If so need to set the db touched flag to keep the server alive
		    (if (> res 0) ;; some records were transferred, keep the db alive

		    (set! last-time start-time)
		    (debug:print-info 4 *default-log-port* "timestamp -> " (seconds->time-string (current-seconds)) ", time since start -> " (seconds->hr-min-sec (- (current-seconds) *time-zero*))))))
	    
	    ;; keep going unless time to exit
	    ;;
	    (if (not *time-to-exit*)
		(let delay-loop ((count 0))
                  ;;(debug:print-info 13 *default-log-port* "delay-loop top; count="count" pid="(current-process-id)" this-wd-num="this-wd-num" *time-to-exit*="*time-to-exit*)
                                                            
		  (if (and (not *time-to-exit*)
			   (< count 4)) ;; was 11, changing to 4. 
		      (begin
			(thread-sleep! 1)
			(delay-loop (+ count 1))))
		  (if (not *time-to-exit*) (loop))))
	    (if (common:low-noise-print 30)
		(debug:print-info 0 *default-log-port* "Exiting watchdog timer, *time-to-exit* = " *time-to-exit*" pid="(current-process-id)" this-wd-num="this-wd-num)))))))

;; TODO: for multiple areas, we will have multiple watchdogs; and multiple threads to manage
(define (common:watchdog)
  ;;#t)
  (debug:print-info 13 *default-log-port* "common:watchdog entered.")

 (let ((dbstruct (db:setup)))
   (debug:print-info 13 *default-log-port* "after db:setup with dbstruct="dbstruct)
   (cond
    ((dbr:dbstruct-read-only dbstruct)
     (debug:print-info 13 *default-log-port* "loading read-only watchdog")
     (common:readonly-watchdog dbstruct))
    (else
     (debug:print-info 13 *default-log-port* "loading writable-watchdog.")
     (common:writable-watchdog dbstruct))))
 (debug:print-info 13 *default-log-port* "watchdog done.");;)
 )


(define (std-exit-procedure)
  (on-exit (lambda () 0))
  ;;(debug:print-info 13 *default-log-port* "std-exit-procedure called; *time-to-exit*="*time-to-exit*)
  (let ((no-hurry  (if *time-to-exit* ;; hurry up
		       #f
		       (begin
			 (set! *time-to-exit* #t)
			 #t))))
    (debug:print-info 4 *default-log-port* "starting exit process, finalizing databases.")
    (if (and no-hurry (debug:debug-mode 18))

    )

  0)

(define (std-signal-handler signum)
  ;; (signal-mask! signum)
  (set! *time-to-exit* #t)
  ;;(debug:print-info 13 *default-log-port* "got signal "signum)
  (debug:print-error 0 *default-log-port* "Received signal " signum " exiting promptly")
  ;; (std-exit-procedure) ;; shouldn't need this since we are exiting and it will be called anyway
  (exit))

(set-signal-handler! signal/int  std-signal-handler)  ;; ^C
(set-signal-handler! signal/term std-signal-handler)
;; (set-signal-handler! signal/stop std-signal-handler)  ;; ^Z NO, do NOT handle ^Z!

			      (file-modification-time fname))))
	      (if (> curmod last-mod)
		  (list curmod fname)
		  res)))
	  '(0 "n/a")
	  all-files)))

;; use bash to expand a glob. Does NOT handle paths with spaces!
;;
(define (common:bash-glob instr)
  (string-split
   (with-input-from-pipe
       (conc "/bin/bash -c \"echo " instr "\"")
     read-line)))
  
;;======================================================================
;; T A R G E T S  ,   S T A T E ,   S T A T U S ,   
;;                    R U N N A M E    A N D   T E S T P A T T
;;======================================================================

;; (map print (map car (hash-table->alist (read-config "runconfigs.config" #f #t))))
;;

(define (common:args-get-runname)
  (let ((res (or (args:get-arg "-runname")
		 (args:get-arg ":runname")
		 (getenv "MT_RUNNAME"))))
    ;; (if res (set-environment-variable "MT_RUNNAME" res)) ;; not sure if this is a good idea. side effect and all ...
    res))

(define (common:args-get-target #!key (split #f)(exit-if-bad #f))
  (let* ((keys    (if (hash-table? *configdat*) (keys:config-get-fields *configdat*) '()))
	 (numkeys (length keys))
	 (target  (or (args:get-arg "-reqtarg")
		      (args:get-arg "-target")
		      (getenv "MT_TARGET")))
	 (tlist   (if target (string-split target "/" #t) '()))
	 (valid   (if target
		      (or (null? keys) ;; probably don't know our keys yet
			  (and (not (null? tlist))
			       (eq? numkeys (length tlist))
			       (null? (filter string-null? tlist))))
		      #f)))
    (if valid
	(if split
	    tlist
	    target)
	(if target
	    (begin
	      (debug:print-error 0 *default-log-port* "Invalid target, spaces or blanks not allowed \"" target "\", target should be: " (string-intersperse keys "/") ", have " tlist " for elements")
	      (if exit-if-bad (exit 1))
	      #f)
	    #f))))

;; logic for getting homehost. Returns (host . at-home)
;; IF *toppath* is not set, wait up to five seconds trying every two seconds
;; (this is to accomodate the watchdog)
;;

	  "%m"))
    ((1 2 3) 1)
    ((4 5 6) 2)
    ((7 8 9) 3)
    ((10 11 12) 4)
    (else #f)))

;; basic ISO8601 format (e.g. "2017-02-28 06:02:54") date time => Unix epoch
;;
(define (common:date-time->seconds datetime)
  (local-time->seconds (string->time datetime "%Y-%m-%d %H:%M:%S")))

;; given span of seconds tstart to tend
;; find start time to mark and mark delta
;;
(define (common:find-start-mark-and-mark-delta tstart tend)
  (let* ((deltat   (- (max tend (+ tend 10)) tstart)) ;; can't handle runs of less than 4 seconds. Pad it to 10 seconds ...
	 (result   #f)
	 (min      60)

;;
(define (common:cron-event cron-str now-seconds-in last-done) ;; ref-seconds = #f is NOW. 
  (let* ((cron-items     (map string->number (string-split cron-str)))
	 (now-seconds    (or now-seconds-in (current-seconds)))
	 (now-time       (seconds->local-time now-seconds))
	 (last-done-time (seconds->local-time last-done))
	 (all-times      (make-hash-table)))
    ;; (print "cron-items: " cron-items "(length cron-items): " (length cron-items))
    (if (not (eq? (length cron-items) 5)) ;; don't even try to figure out junk strings
	#f
	(match-let (((     cmin chour cdayofmonth cmonth    cdayofweek)
		     cron-items)
		    ;; 0     1    2        3         4    5      6
		    ((nsec nmin nhour ndayofmonth nmonth nyr ndayofweek n7 n8 n9)
		     (vector->list now-time))