Megatest

;;======================================================================
;; Copyright 2006-2013, Matthew Welland.
;; 
;;  This program is made available under the GNU GPL version 2.0 or
;;  greater. See the accompanying file COPYING for details.
;; 
;;  This program is distributed WITHOUT ANY WARRANTY; without even the
;;  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
;;  PURPOSE.

(declare (unit db))
(declare (uses common))
(declare (uses keys))
(declare (uses ods))
(declare (uses fs-transport))
(declare (uses client))
(declare (uses mt))

(include "common_records.scm")
(include "db_records.scm")
(include "key_records.scm")
(include "run_records.scm")

;; timestamp type (val1 val2 ...)

  (if (not *toppath*)
      (if (not (setup-for-run))
	  (begin
	    (debug:print 0 "ERROR: Attempted to open db when not in megatest area. Exiting.")
	    (exit))))
  (let* ((dbpath    (conc *toppath* "/megatest.db")) ;; fname)
	 (dbexists  (file-exists? dbpath))
	 (write-access (file-write-access? dbpath))
	 (db        (sqlite3:open-database dbpath)) ;; (never-give-up-open-db dbpath))
	 (handler   (make-busy-timeout (if (args:get-arg "-override-timeout")
					   (string->number (args:get-arg "-override-timeout"))
					   136000)))) ;; 136000))) ;; 136000 = 2.2 minutes
    (if (and dbexists
	     (not write-access))
	(set! *db-write-access* write-access)) ;; only unset so other db's also can use this control
    (debug:print-info 11 "open-db, dbpath=" dbpath " argv=" (argv))
    (sqlite3:set-busy-handler! db handler)
    (if (not dbexists)
	(db:initialize db))
    (db:set-sync db)
    db))

	  (set! *last-global-delta-printed* *global-delta*)))
    (debug:print-info 11 "open-run-close-measure END" )
    res))

(define (db:initialize db)
  (debug:print-info 11 "db:initialize START")
  (let* ((configdat (car *configinfo*))  ;; tut tut, global warning...
	 (keys     (keys:config-get-fields configdat))
	 (havekeys (> (length keys) 0))
	 (keystr   (keys->keystr keys))
	 (fieldstr (keys->key/field keys)))
    (for-each (lambda (key)
		(let ((keyn key))
		  (if (member (string-downcase keyn)
			      (list "runname" "state" "status" "owner" "event_time" "comment" "fail_count"
				    "pass_count"))
		      (begin
			(print "ERROR: your key cannot be named " keyn " as this conflicts with the same named field in the runs table")
			(system (conc "rm -f " dbpath))
			(exit 1)))))
	      keys)
    ;; (sqlite3:execute db "PRAGMA synchronous = OFF;")
    (db:set-sync db)
    (sqlite3:execute db "CREATE TABLE IF NOT EXISTS keys (id INTEGER PRIMARY KEY, fieldname TEXT, fieldtype TEXT, CONSTRAINT keyconstraint UNIQUE (fieldname));")
    (for-each (lambda (key)
		(sqlite3:execute db "INSERT INTO keys (fieldname,fieldtype) VALUES (?,?);" key "TEXT"))
	      keys)
    (sqlite3:execute db (conc 
			 "CREATE TABLE IF NOT EXISTS runs (id INTEGER PRIMARY KEY, " 
			 fieldstr (if havekeys "," "")
			 "runname TEXT,"
			 "state TEXT DEFAULT '',"
			 "status TEXT DEFAULT '',"

  (debug:print-info 11 "db:set-var END " var " " val))

(define (db:del-var db var)
  (debug:print-info 11 "db:del-var START " var)
  (sqlite3:execute db "DELETE FROM metadat WHERE var=?;" var)
  (debug:print-info 11 "db:del-var END " var))

;; use a global for some primitive caching, it is just silly to
;; re-read the db over and over again for the keys since they never
;; change

;; why get the keys from the db? why not get from the *configdat*
;; using keys:config-get-fields?

(define (db:get-keys db)
  (if *db-keys* *db-keys* 
      (let ((res '()))

	(sqlite3:for-each-row 
	 (lambda (key)
	   (set! res (cons key res)))
	 db
	 "SELECT fieldname FROM keys ORDER BY id DESC;")
	(set! *db-keys* res)

	res)))

;; 
(define (db:get-value-by-header row header field)
  (debug:print-info 4 "db:get-value-by-header row: " row " header: " header " field: " field)
  (if (null? header) #f
      (let loop ((hed (car header))
		 (tal (cdr header))
		 (n   0))
	(if (equal? hed field)
	    (vector-ref row n)
	    (if (null? tal) #f (loop (car tal)(cdr tal)(+ n 1)))))))

;;======================================================================
;;  R U N S
;;======================================================================

(define (db:get-run-name-from-id db run-id)
  (let ((res #f))
    (sqlite3:for-each-row
     (lambda (runname)
       (set! res runname))
     db
     "SELECT runname FROM runs WHERE id=?;"
     run-id)
    res))

(define (db:get-run-key-val db run-id key)
  (let ((res #f))
    (sqlite3:for-each-row
     (lambda (val)
       (set! res val))
     db 
     (conc "SELECT " key " FROM runs WHERE id=?;")
     run-id)
    res))

;; keys list to key1,key2,key3 ...
(define (runs:get-std-run-fields keys remfields)
  (let* ((header    (append keys remfields))

	 (keystr    (conc (keys->keystr keys) ","
			  (string-intersperse remfields ","))))
    (list keystr header)))

;; make a query (fieldname like 'patt1' OR fieldname 
(define (db:patt->like fieldname pattstr #!key (comparator " OR "))
  (let ((patts (if (string? pattstr)
		   (string-split pattstr ",")
		   '("%"))))
    (string-intersperse (map (lambda (patt)
			       (let ((wildtype (if (substring-index "%" patt) "LIKE" "GLOB")))
				 (conc fieldname " " wildtype " '" patt "'")))
			     (if (null? patts)
				 '("")
				 patts))
			comparator)))


;; register a test run with the db
(define (db:register-run db keyvals runname state status user)
  (debug:print 3 "runs:register-run runname: " runname " state: " state " status: " status " user: " user)
  (let* ((keys      (map car keyvals))
	 (keystr    (keys->keystr keys))	 
	 (comma     (if (> (length keys) 0) "," ""))
	 (andstr    (if (> (length keys) 0) " AND " ""))
	 (valslots  (keys->valslots keys)) ;; ?,?,? ...

	 (allvals   (append (list runname state status user) (map cadr keyvals)))
	 (qryvals   (append (list runname) (map cadr keyvals)))
	 (key=?str  (string-intersperse (map (lambda (k)(conc k "=?")) keys) " AND ")))
    (debug:print 3 "keys: " keys " allvals: " allvals " keyvals: " keyvals " key=?str is " key=?str)
    (debug:print 2 "NOTE: using target " (string-intersperse (map cadr keyvals) "/") " for this run")
    (if (and runname (null? (filter (lambda (x)(not x)) keyvals))) ;; there must be a better way to "apply and"
	(let ((res #f))
	  (apply sqlite3:execute db (conc "INSERT OR IGNORE INTO runs (runname,state,status,owner,event_time" comma keystr ") VALUES (?,?,?,?,strftime('%s','now')" comma valslots ");")
		 allvals)
	  (apply sqlite3:for-each-row 
	   (lambda (id)
	     (set! res id))
	   db
	   (let ((qry (conc "SELECT id FROM runs WHERE (runname=? " andstr key=?str ");")))
	     ;(debug:print 4 "qry: " qry) 
	     qry)
	   qryvals)
	  (sqlite3:execute db "UPDATE runs SET state=?,status=?,event_time=strftime('%s','now') WHERE id=?;" state status res)
	  res) 
	(begin
	  (debug:print 0 "ERROR: Called without all necessary keys")
	  #f))))


;; replace header and keystr with a call to runs:get-std-run-fields
;;
;; keypatts: ( (KEY1 "abc%def")(KEY2 "%") )
;; runpatts: patt1,patt2 ...
;;
(define (db:get-runs db runpatt count offset keypatts)
  (let* ((res       '())
	 (keys       (db:get-keys db))
	 (runpattstr (db:patt->like "runname" runpatt))
	 (remfields  (list "id" "runname" "state" "status" "owner" "event_time"))
	 (header     (append keys remfields))

	 (keystr     (conc (keys->keystr keys) ","
		           (string-intersperse remfields ",")))
	 (qrystr     (conc "SELECT " keystr " FROM runs WHERE (" runpattstr ") " ;; runname LIKE ? "
		           ;; Generate: " AND x LIKE 'keypatt' ..."
		           (if (null? keypatts) ""
		               (conc " AND "
				     (string-join 
				      (map (lambda (keypatt)
					     (let ((key  (car keypatt))
						   (patt (cadr keypatt)))
					       (db:patt->like key patt)))
					   keypatts)
				      " AND ")))
		           " AND state != 'deleted' ORDER BY event_time DESC "
		           (if (number? count)
		               (conc " LIMIT " count)
		               "")
		           (if (number? offset)
		               (conc " OFFSET " offset)
		               ""))))
    (debug:print-info 11 "db:get-runs START qrystr: " qrystr " keypatts: " keypatts " offset: " offset " limit: " count)
    (sqlite3:for-each-row
     (lambda (a . x)
       (set! res (cons (apply vector a x) res)))
     db
     qrystr
     )
    (debug:print-info 11 "db:get-runs END qrystr: " qrystr " keypatts: " keypatts " offset: " offset " limit: " count)
    (vector header res)))

;; Get all targets from the db
;;
(define (db:get-targets db)
  (let* ((res       '())
	 (keys       (db:get-keys db))
	 (header     keys) ;; (map key:get-fieldname keys))
	 (keystr     (keys->keystr keys))
	 (qrystr     (conc "SELECT " keystr " FROM runs;"))
	 (seen       (make-hash-table)))
    (sqlite3:for-each-row
     (lambda (a . x)
       (let ((targ (cons a x)))
	 (if (not (hash-table-ref/default seen targ #f))
	     (begin
	       (hash-table-set! seen targ #t)
	       (set! res (cons (apply vector targ) res))))))
     db
     qrystr)
    (debug:print-info 11 "db:get-targets END qrystr: " qrystr )
    (vector header res)))

;; just get count of runs
(define (db:get-num-runs db runpatt)
  (let ((numruns 0))
    (debug:print-info 11 "db:get-num-runs START " runpatt)
    (sqlite3:for-each-row 
     (lambda (count)
       (set! numruns count))
     db
     "SELECT COUNT(id) FROM runs WHERE runname LIKE ? AND state != 'deleted';" runpatt)
    (debug:print-info 11 "db:get-num-runs END " runpatt)
    numruns))

;; get some basic run stats
;;
;; ( (runname (( state  count ) ... ))
;;   (   ...  
(define (db:get-run-stats db)
  (let ((totals       (make-hash-table))
	(res          '()))
    (sqlite3:for-each-row
     (lambda (runname state count)
       (let* ((stateparts (string-split state "|"))
	      (newstate   (conc (car stateparts) "\n" (cadr stateparts))))
	 (hash-table-set! totals newstate (+ (hash-table-ref/default totals newstate 0) count))
	 (set! res (cons (list runname newstate count) res))))
     db
    "SELECT runname,t.state||'|'||t.status AS s,count(t.id) FROM runs AS r INNER JOIN tests AS t ON r.id=t.run_id GROUP BY s,runname ORDER BY r.event_time,s DESC;" )
    ;; (set! res (reverse res))
    (for-each (lambda (state)
		(set! res (cons (list "Totals" state (hash-table-ref totals state)) res)))
	      (sort (hash-table-keys totals) string>=))
    res))

;; db:get-runs-by-patt
;; get runs by list of criteria
;; register a test run with the db
;;
;; Use: (db-get-value-by-header (db:get-header runinfo)(db:get-row runinfo))
;;  to extract info from the structure returned
;;
(define (db:get-runs-by-patt db keys runnamepatt targpatt) ;; test-name)
  (let* ((tmp      (runs:get-std-run-fields keys '("id" "runname" "state" "status" "owner" "event_time")))
	 (keystr   (car tmp))
	 (header   (cadr tmp))
	 (res     '())
	 (key-patt "")
	 (runwildtype (if (substring-index "%" runnamepatt) "like" "glob"))
	 (qry-str  #f)
	 (keyvals  (if targpatt (keys:target->keyval keys targpatt) '())))
    (for-each (lambda (keyval)
		(let* ((key    (car keyval))
		       (patt   (cadr keyval))
		       (fulkey (conc ":" key))
		       (wildtype (if (substring-index "%" patt) "like" "glob")))
		  (if patt
		      (set! key-patt (conc key-patt " AND " key " " wildtype " '" patt "'"))
		      (begin
			(debug:print 0 "ERROR: searching for runs with no pattern set for " fulkey)
			(exit 6)))))
	      keyvals)
    (set! qry-str (conc "SELECT " keystr " FROM runs WHERE state != 'deleted' AND runname " runwildtype " ? " key-patt " ORDER BY event_time;"))
    (debug:print-info 4 "runs:get-runs-by-patt qry=" qry-str " " runnamepatt)
    (sqlite3:for-each-row 
     (lambda (a . r)
       (set! res (cons (list->vector (cons a r)) res)))
     db 
     qry-str
     runnamepatt)
    (vector header res)))

;; use (get-value-by-header (db:get-header runinfo)(db:get-row runinfo))
(define (db:get-run-info db run-id)
  ;;(if (hash-table-ref/default *run-info-cache* run-id #f)
  ;;    (hash-table-ref *run-info-cache* run-id)
      (let* ((res      #f)
	     (keys      (db:get-keys db))
	     (remfields (list "id" "runname" "state" "status" "owner" "event_time"))
	     (header    (append keys remfields))

	     (keystr    (conc (keys->keystr keys) ","
			      (string-intersperse remfields ","))))
	(debug:print-info 11 "db:get-run-info run-id: " run-id " header: " header " keystr: " keystr)
	(sqlite3:for-each-row
	 (lambda (a . x)
	   (set! res (apply vector a x)))
	 db
	 (conc "SELECT " keystr " FROM runs WHERE id=? AND state != 'deleted';")
	 run-id)
	(debug:print-info 11 "db:get-run-info run-id: " run-id " header: " header " keystr: " keystr)
	(let ((finalres (vector header res)))
	  ;; (hash-table-set! *run-info-cache* run-id finalres)
	  finalres)))

(define (db:set-comment-for-run db run-id comment)
  (debug:print-info 11 "db:set-comment-for-run START run-id: " run-id " comment: " comment)
  (sqlite3:execute db "UPDATE runs SET comment=? WHERE id=?;" comment run-id)
  (debug:print-info 11 "db:set-comment-for-run END run-id: " run-id " comment: " comment))

;; does not (obviously!) removed dependent data. But why not!!?
(define (db:delete-run db run-id)
  (common:clear-caches) ;; don't trust caches after doing any deletion
  (sqlite3:execute db "UPDATE runs SET state='deleted' WHERE id=?;" run-id))
;;  (sqlite3:execute db "DELETE FROM runs WHERE id=?;" run-id))



(define (db:update-run-event_time db run-id)
  (debug:print-info 11 "db:update-run-event_time START run-id: " run-id)
  (sqlite3:execute db "UPDATE runs SET event_time=strftime('%s','now') WHERE id=?;" run-id)
  (debug:print-info 11 "db:update-run-event_time END run-id: " run-id)) 

(define (db:lock/unlock-run db run-id lock unlock user)

;;======================================================================
;; K E Y S
;;======================================================================

;; get key val pairs for a given run-id
;; ( (FIELDNAME1 keyval1) (FIELDNAME2 keyval2) ... )
(define (db:get-key-val-pairs db run-id)
  (let* ((keys (db:get-keys db))
	 (res  '()))
    (debug:print-info 11 "db:get-key-val-pairs START keys: " keys " run-id: " run-id)
    (for-each 
     (lambda (key)
       (let ((qry (conc "SELECT " key " FROM runs WHERE id=?;")))
	 ;; (debug:print 0 "qry: " qry)
	 (sqlite3:for-each-row 
	  (lambda (key-val)
	    (set! res (cons (list key key-val) res)))
	  db qry run-id)))
     keys)
    (debug:print-info 11 "db:get-key-val-pairs END keys: " keys " run-id: " run-id)
    (reverse res)))

;; get key vals for a given run-id
(define (db:get-key-vals db run-id)
   (let ((mykeyvals (hash-table-ref/default *keyvals* run-id #f)))
    (if mykeyvals 
	mykeyvals
    (let* ((keys (db:get-keys db))
	 (res  '()))
    (debug:print-info 11 "db:get-key-vals START keys: " keys " run-id: " run-id)
    (for-each 
     (lambda (key)
       (let ((qry (conc "SELECT " key " FROM runs WHERE id=?;")))
	 ;; (debug:print 0 "qry: " qry)
	 (sqlite3:for-each-row 
	  (lambda (key-val)
	    (set! res (cons key-val res)))
	  db qry run-id)))
     keys)
    (debug:print-info 11 "db:get-key-vals END keys: " keys " run-id: " run-id)
	  (let ((final-res (reverse res)))
	    (hash-table-set! *keyvals* run-id final-res)
	    final-res)))))

;; The target is keyval1/keyval2..., cached in *target* as it is used often
(define (db:get-target db run-id)
  (let ((mytarg (hash-table-ref/default *target* run-id #f)))
    (if mytarg
	mytarg
  (let* ((keyvals (db:get-key-vals db run-id))
	 (thekey  (string-intersperse (map (lambda (x)(if x x "-na-")) keyvals) "/")))
	  (hash-table-set! *target* run-id thekey)
	  thekey))))

;;======================================================================
;;  T E S T S
;;======================================================================

;; states and statuses are lists, turn them into ("PASS","FAIL"...) and use NOT IN
;; i.e. these lists define what to NOT show.
;; states and statuses are required to be lists, empty is ok
;; not-in #t = above behaviour, #f = must match
(define (db:get-tests-for-run db run-id testpatt states statuses offset limit not-in sort-by
			      #!key

			      (qryvals #f)
			      )
  (debug:print-info 11 "db:get-tests-for-run START run-id=" run-id ", testpatt=" testpatt ", states=" states ", statuses=" statuses ", not-in=" not-in ", sort-by=" sort-by)
  (let* ((qryvals         (if qryvals qryvals "id,run_id,testname,state,status,event_time,host,cpuload,diskfree,uname,rundir,item_path,run_duration,final_logf,comment"))
	 (res            '())
	 ;; if states or statuses are null then assume match all when not-in is false
	 (states-qry      (if (null? states) 
			      #f
			      (conc " state "  
				    (if not-in
					" NOT IN ('"
					" IN ('") 
				    (string-intersperse states   "','")
				    "')")))
	 (statuses-qry    (if (null? statuses)
			      #f
			      (conc " status "
				    (if not-in 
					" NOT IN ('"
					" IN ('") 
				    (string-intersperse statuses "','")
				    "')")))
	 (states-statuses-qry 
	                  (cond 
			   ((and states-qry statuses-qry)
			    (conc " AND ( " states-qry " AND " statuses-qry " ) "))
			   (states-qry  
			    (conc " AND " states-qry))
			   (statuses-qry 
			    (conc " AND " statuses-qry))
			   (else "")))
	 (tests-match-qry (tests:match->sqlqry testpatt))
	 (qry             (conc "SELECT " qryvals
				" FROM tests WHERE run_id=? AND state != 'DELETED' "

				states-statuses-qry
				(if tests-match-qry (conc " AND (" tests-match-qry ") ") "")
				(case sort-by
				  ((rundir)     " ORDER BY length(rundir) DESC ")
				  ((event_time) " ORDER BY event_time ASC ")
				  (else         (if (string? sort-by)
						    (conc " ORDER BY " sort-by) 
						    "")))
				(if limit  (conc " LIMIT " limit)   "")
				(if offset (conc " OFFSET " offset) "")
				";"
			 )))
    (debug:print-info 8 "db:get-tests-for-run qry=" qry)
    (sqlite3:for-each-row 
     (lambda (a . b) ;; id run-id testname state status event-time host cpuload diskfree uname rundir item-path run-duration final-logf comment)
       (set! res (cons (apply vector a b) res))) ;; id run-id testname state status event-time host cpuload diskfree uname rundir item-path run-duration final-logf comment) res)))
     db 
     qry
     run-id
     )
    (debug:print-info 11 "db:get-tests-for-run START run-id=" run-id ", testpatt=" testpatt ", states=" states ", statuses=" statuses ", not-in=" not-in ", sort-by=" sort-by)
    res))

;; get a useful subset of the tests data (used in dashboard
;; use db:mintests-get-{id ,run_id,testname ...}
(define (db:get-tests-for-runs-mindata db run-ids testpatt states status not-in)
  (db:get-tests-for-runs db run-ids testpatt states status not-in: not-in qryvals: "id,run_id,testname,state,status,event_time,item_path"))

;; NB // This is get tests for "runs" (note the plural!!)
;;
;; states and statuses are lists, turn them into ("PASS","FAIL"...) and use NOT IN
;; i.e. these lists define what to NOT show.
;; states and statuses are required to be lists, empty is ok
;; not-in #t = above behaviour, #f = must match
;; run-ids is a list of run-ids or a single number or #f for all runs
(define (db:get-tests-for-runs db run-ids testpatt states statuses 
			      #!key (not-in #t)
			      (sort-by #f)
			      (qryvals "id,run_id,testname,state,status,event_time,host,cpuload,diskfree,uname,rundir,item_path,run_duration,final_logf,comment")) ;; 'rundir 'event_time
  (debug:print-info 11 "db:get-tests-for-run START run-ids=" run-ids ", testpatt=" testpatt ", states=" states ", statuses=" statuses ", not-in=" not-in ", sort-by=" sort-by)
  (let* ((res '())
	 ;; if states or statuses are null then assume match all when not-in is false

			      (conc " status "
				    (if not-in "NOT" "") 
				    " IN ('" 
				    (string-intersperse statuses "','")
				    "')")))
	 (tests-match-qry (tests:match->sqlqry testpatt))
	 (qry             (conc "SELECT " qryvals 
				" FROM tests WHERE state != 'DELETED' "
				(if run-ids
				    (if (list? run-ids)
					(conc "AND run_id IN (" (string-intersperse (map conc run-ids) ",") ") ")
					(conc "AND run_id=" run-ids " "))
				    " ") ;; #f => run-ids don't filter on run-ids
				(if states-qry   (conc " AND " states-qry)   "")
				(if statuses-qry (conc " AND " statuses-qry) "")
				(if tests-match-qry (conc " AND (" tests-match-qry ") ") "")
				(case sort-by
				  ((rundir)     " ORDER BY length(rundir) DESC;")
				  ((event_time) " ORDER BY event_time ASC;")

	    (sqlite3:execute db "UPDATE tests SET state='DELETED',status='n/a' WHERE id=?;" test-id)))))

(define (db:delete-tests-for-run db run-id)
  (common:clear-caches)
  (sqlite3:execute db "DELETE FROM tests WHERE run_id=?;" run-id))

(define (db:delete-old-deleted-test-records db)
  (common:clear-caches)
  (let ((targtime (- (current-seconds)(* 30 24 60 60)))) ;; one month in the past
    (sqlite3:execute db "DELETE FROM tests WHERE state='DELETED' AND event_time<?;" targtime)))

;; set tests with state currstate and status currstatus to newstate and newstatus
;; use currstate = #f and or currstatus = #f to apply to any state or status respectively
;; WARNING: SQL injection risk. NB// See new but not yet used "faster" version below
;;
(define (db:set-tests-state-status db run-id testnames currstate currstatus newstate newstatus)
  (for-each (lambda (testname)
	      (let ((qry (conc "UPDATE tests SET state=?,status=? WHERE "
			       (if currstate  (conc "state='" currstate "' AND ") "")
			       (if currstatus (conc "status='" currstatus "' AND ") "")
			       " run_id=? AND testname=? AND NOT (item_path='' AND testname in (SELECT DISTINCT testname FROM tests WHERE testname=? AND item_path != ''));")))
		;;(debug:print 0 "QRY: " qry)
		(sqlite3:execute db qry run-id newstate newstatus testname testname)))
	    testnames))


(define (cdb:set-tests-state-status-faster serverdat run-id testnames currstate currstatus newstate newstatus)
  ;; Convert #f to wildcard %
  (if (null? testnames)
      #t
      (let ((currstate  (if currstate currstate "%"))
	    (currstatus (if currstatus currstatus "%")))
	(let loop ((hed (car testnames))
		   (tal (cdr testnames))
		   (thr '()))
	  (let ((th1 (if newstate  (create-thread (cbd:client-call serverdat 'update-test-state  #t *default-numtries* newstate  currstate  run-id testname testname)) #f))
		(th2 (if newstatus (create-thread (cbd:client-call serverdat 'update-test-status #t *default-numtries* newstatus currstatus run-id testname testname)) #f)))
	    (thread-start! th1)
	    (thread-start! th2)
	    (if (null? tal)
		(loop (car tal)(cdr tal)(cons th1 (cons th2 thr)))
		(for-each
		 (lambda (th)
		   (if th (thread-join! th)))
		 thr)))))))

(define (cdb:delete-tests-in-state serverdat run-id state)
  (common:clear-caches)
  (cdb:client-call serverdat 'delete-tests-in-state #t *default-numtries* run-id state))

(define (cdb:tests-update-cpuload-diskfree serverdat test-id cpuload diskfree)
  (cdb:client-call serverdat 'update-cpuload-diskfree #t *default-numtries* cpuload diskfree test-id))

(define (cdb:tests-update-run-duration serverdat test-id minutes)
  (cdb:client-call serverdat 'update-run-duration #t *default-numtries* minutes test-id))

(define (cdb:tests-update-uname-host serverdat test-id uname hostname)
  (cdb:client-call serverdat 'update-uname-host #t *default-numtries* test-id uname hostname))

;; speed up for common cases with a little logic
(define (db:test-set-state-status-by-id db test-id newstate newstatus newcomment)
  (cond
   ((and newstate newstatus newcomment)
    (sqlite3:execute db "UPDATE tests SET state=?,status=?,comment=? WHERE id=?;" newstate newstatus newcomment test-id))
   ((and newstate newstatus)
    (sqlite3:execute db "UPDATE tests SET state=?,status=? WHERE id=?;" newstate newstatus test-id))
   (else
    (if newstate   (sqlite3:execute db "UPDATE tests SET state=?   WHERE id=?;" newstate   test-id))
    (if newstatus  (sqlite3:execute db "UPDATE tests SET status=?  WHERE id=?;" newstatus  test-id))
    (if newcomment (sqlite3:execute db "UPDATE tests SET comment=? WHERE id=?;" newcomment test-id)))))

(define (db:test-set-state-status-by-run-id-testname db run-id test-name item-path status state)
  (sqlite3:execute db "UPDATE tests SET state=?,status=?,event_time=strftime('%s','now') WHERE run_id=? AND testname=? AND item_path=?;" 
		   state status run-id test-name item-path))

(define (db:get-count-tests-running db)
  (let ((res 0))
    (sqlite3:for-each-row
     (lambda (count)
       (set! res count))
     db
     "SELECT count(id) FROM tests WHERE state in ('RUNNING','LAUNCHED','REMOTEHOSTSTART');")
    res))

(define (db:get-running-stats db)
  (let ((res '()))
    (sqlite3:for-each-row
     (lambda (state count)
       (set! res (cons (list state count) res)))
     db
     "SELECT state,count(id) FROM tests GROUP BY state ORDER BY id DESC;")
    res))

(define (db:get-count-tests-running-in-jobgroup db jobgroup)
  (if (not jobgroup)
      0 ;; 
      (let ((res 0))
	(sqlite3:for-each-row
	 (lambda (count)

	    (query-sig   (message-digest-string (md5-primitive) (conc qtype immediate params)))
	    (zdat        (db:obj->string (vector client-sig qtype immediate query-sig params (current-seconds))))) ;; (with-output-to-string (lambda ()(serialize params))))
       (debug:print-info 11 "zdat=" zdat)
       (let* ((res  #f)
	      (rawdat      (http-transport:client-send-receive serverdat zdat))
	      (tmp         #f))
	 (debug:print-info 11 "Sent " zdat ", received " rawdat)
	 (if rawdat
	     (begin
	       (set! tmp (db:string->obj rawdat))
	       (vector-ref tmp 2))
	     (begin
	       (debug:print 0 "ERROR: Communication with the server failed. Exiting if possible")
	       (exit 1))))))
    ((zmq)
     (handle-exceptions
      exn
      (begin
	(debug:print-info 0 "cdb:client-call timeout or error. Trying again in 5 seconds")
	(thread-sleep! 5) 
	(if (> numretries 0)(apply cdb:client-call serverdat qtype immediate (- numretries 1) params)))

(define (cdb:tests-register-test serverdat run-id test-name item-path)
  (cdb:client-call serverdat 'register-test #t *default-numtries* run-id test-name item-path))

(define (cdb:flush-queue serverdat)
  (cdb:client-call serverdat 'flush #f *default-numtries*))

(define (cdb:kill-server serverdat pid)
  (cdb:client-call serverdat 'killserver #t *default-numtries* pid))

(define (cdb:roll-up-pass-fail-counts serverdat run-id test-name item-path status)
  (cdb:client-call serverdat 'immediate #f *default-numtries* open-run-close db:roll-up-pass-fail-counts #f run-id test-name item-path status))

(define (cdb:get-test-info serverdat run-id test-name item-path)
  (cdb:client-call serverdat 'immediate #f *default-numtries* open-run-close db:get-test-info #f run-id test-name item-path))

	'(test-set-rundir-by-test-id "UPDATE tests SET rundir=? WHERE id=?")
	'(test-set-rundir         "UPDATE tests SET rundir=? WHERE run_id=? AND testname=? AND item_path=?;")
	'(delete-tests-in-state   "DELETE FROM tests WHERE state=? AND run_id=?;")
	'(tests:test-set-toplog   "UPDATE tests SET final_logf=? WHERE run_id=? AND testname=? AND item_path='';")
	'(update-cpuload-diskfree "UPDATE tests SET cpuload=?,diskfree=? WHERE id=?;")
	'(update-run-duration     "UPDATE tests SET run_duration=? WHERE id=?;")
	'(update-uname-host       "UPDATE tests SET uname=?,host=? WHERE id=?;")
	'(update-test-state       "UPDATE tests SET state=? WHERE state=? AND run_id=? AND testname=? AND NOT (item_path='' AND testname IN (SELECT DISTINCT testname FROM tests WHERE testname=? AND item_path != ''));")
	'(update-test-status      "UPDATE tests SET status=? WHERE status like ? AND run_id=? AND testname=? AND NOT (item_path='' AND testname IN (SELECT DISTINCT testname FROM tests WHERE testname=? AND item_path != ''));")
    ))

;; do not run these as part of the transaction
(define db:special-queries   '(rollup-tests-pass-fail
			       db:roll-up-pass-fail-counts
                               login
                               immediate

			     (hash-table-set! *logged-in-clients* client-key (current-seconds))
			     (server:reply return-address qry-sig #t '(#t "successful login")))      ;; path matches - pass! Should vet the caller at this time ...
			   (server:reply return-address qry-sig #f (list #f (conc "Login failed due to mismatch paths: " calling-path ", " *toppath*)))))))
		((flush sync)
		 (server:reply return-address qry-sig #t 1)) ;; (length data)))
		((set-verbosity)
		 (set! *verbosity* (car params))
		 (server:reply return-address qry-sig #t (list #t *verbosity*)))
		((killserver)
		 (let ((hostname (car  *runremote*))
		       (port     (cadr *runremote*))
		       (pid      (car params)))
		   (debug:print 0 "WARNING: Server on " hostname ":" port " going down by user request!")
		   (debug:print-info 1 "current pid=" (current-process-id))
		   (open-run-close tasks:server-deregister tasks:open-db 

				   hostname
				   port: port)
		   (set! *server-run* #f)
		   (thread-sleep! 3)
		   (process-signal pid signal/kill)
		   (server:reply return-address qry-sig #t '(#t "exit process started"))))
		(else ;; not a command, i.e. is a query
		 (debug:print 0 "ERROR: Unrecognised query/command " stmt-key)
		 (server:reply return-address qry-sig #f 'failed)))))
	   (else
	    (debug:print-info 11 "Executing " stmt-key " for " params)
	    (apply sqlite3:execute (hash-table-ref queries stmt-key) params)
	    (server:reply return-address qry-sig #t #t)))))))

      '()
      (let* ((unmet-pre-reqs '())
	     (result         '()))
	(for-each 
	 (lambda (waitontest-name)
	   ;; by getting the tests with matching name we are looking only at the matching test 
	   ;; and related sub items
	   (let ((tests             (mt:get-tests-for-run run-id waitontest-name '() '()))
		 (ever-seen         #f)
		 (parent-waiton-met #f)
		 (item-waiton-met   #f))
	     (for-each 
	      (lambda (test)
		;; (if (equal? waitontest-name (db:test-get-testname test)) ;; by defintion this had better be true ...
		(let* ((state             (db:test-get-state test))
		       (status            (db:test-get-status test))
		       (item-path         (db:test-get-item-path test))
		       (is-completed      (equal? state "COMPLETED"))
		       (is-killed         (equal? state "KILLED"))
		       (is-ok             (member status '("PASS" "WARN" "CHECK" "WAIVED" "SKIP")))
		       (same-itempath     (equal? ref-item-path item-path)))
		  (set! ever-seen #t)
		  (cond
		   ;; case 1, non-item (parent test) is 
		   ((and (equal? item-path "") ;; this is the parent test
			 is-completed
			 (or is-ok (member mode '(toplevel itemmatch))))
		    (set! parent-waiton-met #t))
		   ;; Special case for toplevel and KILLED
		   ((and (equal? item-path "") ;; this is the parent test
			 is-killed
			 (eq? mode 'toplevel))
		    (set! parent-waiton-met #t))
		   ((or (and (not same-itempath)
			     (eq? mode 'itemmatch))  ;; in itemmatch mode we look only at the same itempath
			(and same-itempath
			     is-completed
			     (or is-ok 
				 (eq? mode 'toplevel)              ;; toplevel does not block on FAIL
				 (and is-ok (eq? mode 'itemmatch)) ;; itemmatch blocks on not ok
				 )))
		    (set! item-waiton-met #t)))))
	      tests)
             ;; both requirements, parent and item-waiton must be met to NOT add item to
             ;; prereq's not met list
	     (if (not (or parent-waiton-met item-waiton-met))
		 (set! result (append (if (null? tests) (list waitontest-name) tests) result)))
	     ;; if the test is not found then clearly the waiton is not met...
	     ;; (if (not ever-seen)(set! result (cons waitontest-name result)))))
	     (if (not ever-seen)
		 (set! result (append (if (null? tests)(list waitontest-name) tests) result)))))
	 waitons)