Megatest

                                type TEXT DEFAULT '',
                              CONSTRAINT test_data_constraint UNIQUE (test_id,category,variable));")
    ;; Must do this *after* running patch db !! No more. 
    (db:set-var db "MEGATEST_VERSION" megatest-version)
    (debug:print-info 11 "db:initialize END")
    ))

;;======================================================================
;; T E S T   S P E C I F I C   D B 
;;======================================================================

;; Create the sqlite db for the individual test(s)
(define (open-test-db work-area) 
  (debug:print-info 11 "open-test-db " work-area)
  (if (and work-area 
	   (directory? work-area)
	   (file-read-access? work-area))
      (let* ((dbpath    (conc work-area "/testdat.db"))
	     (tdb-writeable (file-write-access? dbpath))
	     (dbexists  (file-exists? dbpath))
	     (handler   (make-busy-timeout (if (args:get-arg "-override-timeout")
					       (string->number (args:get-arg "-override-timeout"))
					       136000))))
	(handle-exceptions
	 exn
	 (begin
	   (debug:print 2 "ERROR: problem accessing test db " work-area ", you probably should clean and re-run this test"
			((condition-property-accessor 'exn 'message) exn))
	   (set! db (sqlite3:open-database ":memory:"))) ;; open an in-memory db to allow readonly access 
	 (set! db (sqlite3:open-database dbpath)))
	(if *db-write-access* (sqlite3:set-busy-handler! db handler))
	(if (not dbexists)
	    (begin
	      (sqlite3:execute db "PRAGMA synchronous = FULL;")
	      (debug:print-info 11 "Initialized test database " dbpath)
	      (db:testdb-initialize db)))
	;; (sqlite3:execute db "PRAGMA synchronous = 0;")
	(debug:print-info 11 "open-test-db END (sucessful)" work-area)
	;; now let's test that everything is correct
	(handle-exceptions
	 exn
	 (begin
	   (debug:print 0 "ERROR: problem accessing test db " work-area ", you probably should clean and re-run this test"
			((condition-property-accessor 'exn 'message) exn))
	   #f)
	 ;; Is there a cheaper single line operation that will check for existance of a table
	 ;; and raise an exception ?
	 (sqlite3:execute db "SELECT id FROM test_data LIMIT 1;"))
	db)
      (begin
	(debug:print-info 11 "open-test-db END (unsucessful)" work-area)
	#f)))

;; find and open the testdat.db file for an existing test
(define (db:open-test-db-by-test-id db test-id #!key (work-area #f))
  (let* ((test-path (if work-area
			work-area
			(db:test-get-rundir-from-test-id db test-id))))
    (debug:print 3 "TEST PATH: " test-path)
    (open-test-db test-path)))

(define (db:testdb-initialize db)
  (debug:print 11 "db:testdb-initialize START")
  (for-each
   (lambda (sqlcmd)
     (sqlite3:execute db sqlcmd))
   (list "CREATE TABLE IF NOT EXISTS test_rundat (
              id INTEGER PRIMARY KEY,
              update_time TIMESTAMP,
              cpuload INTEGER DEFAULT -1,
              diskfree INTEGER DEFAULT -1,
              diskusage INTGER DEFAULT -1,
              run_duration INTEGER DEFAULT 0);"
	 "CREATE TABLE IF NOT EXISTS test_data (
              id INTEGER PRIMARY KEY,
              test_id INTEGER,
              category TEXT DEFAULT '',
              variable TEXT,
	      value REAL,
	      expected REAL,
	      tol REAL,
              units TEXT,
              comment TEXT DEFAULT '',
              status TEXT DEFAULT 'n/a',
              type TEXT DEFAULT '',
              CONSTRAINT test_data_constraint UNIQUE (test_id,category,variable));"
	 "CREATE TABLE IF NOT EXISTS test_steps (
              id INTEGER PRIMARY KEY,
              test_id INTEGER, 
              stepname TEXT, 
              state TEXT DEFAULT 'NOT_STARTED', 
              status TEXT DEFAULT 'n/a',
              event_time TIMESTAMP,
              comment TEXT DEFAULT '',
              logfile TEXT DEFAULT '',
              CONSTRAINT test_steps_constraint UNIQUE (test_id,stepname,state));"
	 ;; test_meta can be used for handing commands to the test
	 ;; e.g. KILLREQ
	 ;;      the ackstate is set to 1 once the command has been completed
	 "CREATE TABLE IF NOT EXISTS test_meta (
              id INTEGER PRIMARY KEY,
              var TEXT,
              val TEXT,
              ackstate INTEGER DEFAULT 0,
              CONSTRAINT metadat_constraint UNIQUE (var));"))
  (debug:print 11 "db:testdb-initialize END"))

;;======================================================================
;; L O G G I N G    D B 
;;======================================================================

(define (open-logging-db) ;;  (conc *toppath* "/megatest.db") (car *configinfo*)))
  (let* ((dbpath    (conc (if *toppath* (conc *toppath* "/") "") "logging.db")) ;; fname)
	 (dbexists  (file-exists? dbpath))

     (lambda (a . b) ;; id run-id testname state status event-time host cpuload diskfree uname rundir item-path run-duration final-logf comment)
       (set! res (cons (apply vector a b) res))) ;; id run-id testname state status event-time host cpuload diskfree uname rundir item-path run-duration final-logf comment) res)))
     db 
     qry
     )
    res))

;; this one is a bit broken BUG FIXME
(define (db:delete-test-step-records db test-id #!key (work-area #f))
  ;; Breaking it into two queries for better file access interleaving
  (let* ((tdb (db:open-test-db-by-test-id db test-id work-area: work-area)))
    ;; test db's can go away - must check every time
    (if (sqlite3:database? tdb)
	(begin
	  (sqlite3:execute tdb "DELETE FROM test_steps;")
	  (sqlite3:execute tdb "DELETE FROM test_data;")
	  (sqlite3:finalize! tdb)))))

;; 
(define (db:delete-test-records db tdb test-id #!key (force #f))
  (if tdb 
      (begin
	(sqlite3:execute tdb "DELETE FROM test_steps;")
	(sqlite3:execute tdb "DELETE FROM test_data;"))
      (db:delete-test-step-records db test-id))
  (if db 
      (begin
	(sqlite3:execute db "DELETE FROM test_steps WHERE test_id=?;" test-id)
	(sqlite3:execute db "DELETE FROM test_data  WHERE test_id=?;" test-id)
	(if force
	    (sqlite3:execute db "DELETE FROM tests WHERE id=?;" test-id)
	    (sqlite3:execute db "UPDATE tests SET state='DELETED',status='n/a',comment='' WHERE id=?;" test-id)))))

    (sqlite3:execute db "UPDATE tests SET state=?,status=? WHERE id=?;" newstate newstatus test-id))
   (else
    (if newstate   (sqlite3:execute db "UPDATE tests SET state=?   WHERE id=?;" newstate   test-id))
    (if newstatus  (sqlite3:execute db "UPDATE tests SET status=?  WHERE id=?;" newstatus  test-id))
    (if newcomment (sqlite3:execute db "UPDATE tests SET comment=? WHERE id=?;" newcomment test-id))))
  (mt:process-triggers test-id newstate newstatus))

(define (db:update-testdat-meta-info db test-id work-area cpuload diskfree minutes)
  (let ((tdb         (db:open-test-db-by-test-id db test-id work-area: work-area)))
    (if (sqlite3:database? tdb)
	(begin
	  (sqlite3:execute tdb "INSERT INTO test_rundat (update_time,cpuload,diskfree,run_duration) VALUES (strftime('%s','now'),?,?,?);"
			   cpuload diskfree minutes)
	  (sqlite3:finalize! tdb))
	(debug:print 2 "Can't update testdat.db for test " test-id " read-only or non-existant"))))
    
;; Never used, but should be?
(define (db:test-set-state-status-by-run-id-testname db run-id test-name item-path status state)
  (sqlite3:execute db "UPDATE tests SET state=?,status=?,event_time=strftime('%s','now') WHERE run_id=? AND testname=? AND item_path=?;" 
 		   state status run-id test-name item-path))

(define (db:get-count-tests-running db)
  (let ((res 0))

       (set! res id)) ;; (vector id run-id testname state status event-time host cpuload diskfree uname rundir item-path run_duration final_logf comment )))
     db 
     "SELECT id FROM tests WHERE run_id=? AND testname=? AND item_path=?;"
     run-id testname item-path)
    res))

(define db:get-test-id db:get-test-id-not-cached)

;; given a test-info record, patch in the latest data from the testdat.db file
;; found in the test run directory
;;
;; NOT USED
;;
(define (db:patch-tdb-data-into-test-info db test-id res #!key (work-area #f))
  (let ((tdb (db:open-test-db-by-test-id db test-id work-area: work-area)))
    ;; get state and status from megatest.db in real time
    ;; other fields that perhaps should be updated:
    ;;   fail_count
    ;;   pass_count
    ;;   final_logf
    (sqlite3:for-each-row
     (lambda (state status final_logf)
       (db:test-set-state!        res state)
       (db:test-set-status!       res status)
       (db:test-set-final_logf!   res final_logf))
     db
     "SELECT state,status,final_logf FROM tests WHERE id=?;"
     test-id)
    (if tdb
	(begin
	  (sqlite3:for-each-row
	   (lambda (update_time cpuload disk_free run_duration)
	     (db:test-set-cpuload!      res cpuload)
	     (db:test-set-diskfree!     res disk_free)
	     (db:test-set-run_duration! res run_duration))
	   tdb
	   "SELECT update_time,cpuload,diskfree,run_duration FROM test_rundat ORDER BY id DESC LIMIT 1;")
	  (sqlite3:finalize! tdb))
	;; if the test db is not found what to do?
	;; 1. set state to DELETED
	;; 2. set status to n/a
	(begin
	  (db:test-set-state!  res "NOT_STARTED")
	  (db:test-set-status! res "n/a")))))

(define *last-test-cache-delete* (current-seconds))

(define (db:clean-all-caches)
  (set! *test-info* (make-hash-table))
  (set! *test-id-cache* (make-hash-table)))


(define (db:get-all-tests-info-by-run-id db run-id)
  (let ((res '()))
    (sqlite3:for-each-row
     (lambda (id run-id testname state status event-time host cpuload diskfree uname rundir item-path run_duration final_logf comment)
       ;;                 0    1       2      3      4        5       6      7        8     9     10      11          12          13       14
       (set! res (cons (vector id run-id testname state status event-time host cpuload diskfree uname rundir item-path run_duration final_logf comment)

(define (db:test-get-paths-matching db keynames target fnamepatt #!key (res '()))
  ;; BUG: Move the values derived from args to parameters and push to megatest.scm
  (let* ((testpatt   (if (args:get-arg "-testpatt")(args:get-arg "-testpatt") "%"))
	 (statepatt  (if (args:get-arg ":state")   (args:get-arg ":state")    "%"))
	 (statuspatt (if (args:get-arg ":status")  (args:get-arg ":status")   "%"))
	 (runname    (if (args:get-arg ":runname") (args:get-arg ":runname")  "%"))
	 (paths-from-db (cdb:remote-run db:test-get-paths-matching-keynames-target-new db keynames target res
					testpatt:   testpatt
					statepatt:  statepatt
					statuspatt: statuspatt
					runname:    runname)))
    (if fnamepatt
	(apply append 
	       (map (lambda (p)
		      (if (directory-exists? p)
			  (glob (conc p "/" fnamepatt))
			  '()))
		    paths-from-db))

     (lambda (p)
       (set! res (cons p res)))
     db 
     qrystr)
    res))

(define (db:test-get-paths-matching-keynames-target-new db keynames target res 
							#!key
							(testpatt   "%")
							(statepatt  "%")
							(statuspatt "%")
							(runname    "%"))
  (let* ((row-ids '())
	 (keystr (string-intersperse 
		  (map (lambda (key val)
			 (conc key " like '" val "'"))
		       keynames 
		       (string-split target "/"))
		  " AND "))

	      (string-substitute 
	       (regexp "_") "=" msg #t))
	   (lambda ()(deserialize)))
	 (vector #f #f #f))) ;; crude reply for when things go awry
    ((zmq)(with-input-from-string msg (lambda ()(deserialize))))
    (else msg)))

(define (cdb:use-non-blocking-mode proc)
  (set! *client-non-blocking-mode* #t)
  (let ((res (proc)))
    (set! *client-non-blocking-mode* #f)
    res))

;; params = 'target cached remparams
;;
;; make-vector-record cdb packet client-sig qtype immediate query-sig params qtime
;;
;; cdb:client-call is the unified interface to all the transports. It dispatches the
;;                 query to a server routine (e.g. server:client-send-recieve) that 
;;                 transports the data to the server where it is passed to db:process-queue-item
;;                 which either returns the data to the calling server routine or 
;;                 directly calls the returning procedure (e.g. zmq).
;;
(define (cdb:client-call serverdat qtype immediate numretries . params)
  (debug:print-info 11 "cdb:client-call serverdat=" serverdat ", qtype=" qtype ", immediate=" immediate ", numretries=" numretries ", params=" params)
  (case *transport-type* 
    ((fs)
     (let ((packet (vector "na" qtype immediate "na" params 0)))
       (fs:process-queue-item packet)))
    ((http)
     (let* ((client-sig  (client:get-signature))
	    (query-sig   (message-digest-string (md5-primitive) (conc qtype immediate params)))
	    (zdat        (db:obj->string (vector client-sig qtype immediate query-sig params (current-seconds))))) ;; (with-output-to-string (lambda ()(serialize params))))
       (debug:print-info 11 "zdat=" zdat)
       (let* ((res  #f)
	      (rawdat      (http-transport:client-send-receive serverdat zdat))
	      (tmp         #f))
	 (debug:print-info 11 "Sent " zdat ", received " rawdat)
	 (if rawdat
	     (begin
	       (set! tmp (db:string->obj rawdat))
	       (vector-ref tmp 2))
	     (begin
	       (debug:print 0 "ERROR: Communication with the server failed. Exiting if possible")
	       (exit 1))))))
    ((zmq)
     (handle-exceptions
      exn
      (begin
	(debug:print-info 0 "cdb:client-call timeout or error. Trying again in 5 seconds")
	(thread-sleep! 5) 
	(if (> numretries 0)(apply cdb:client-call serverdat qtype immediate (- numretries 1) params)))
      (let* ((push-socket (vector-ref serverdat 0))
	     (sub-socket  (vector-ref serverdat 1))
	     (client-sig  (client:get-signature))
	     (query-sig   (message-digest-string (md5-primitive) (conc qtype immediate params)))
	     (zdat        (db:obj->string (vector client-sig qtype immediate query-sig params (current-seconds)))) ;; (with-output-to-string (lambda ()(serialize params))))
	     (res  #f)
	     (send-receive (lambda ()
			     (debug:print-info 11 "sending message")
			     (send-message push-socket zdat)
			     (debug:print-info 11 "message sent")
			     (let loop ()
			       ;; get the sender info
			       ;; this should match (client:get-signature)
			       ;; we will need to process "all" messages here some day
			       (receive-message* sub-socket)
			       ;; now get the actual message
			       (let ((myres (db:string->obj (receive-message* sub-socket))))
				 (if (equal? query-sig (vector-ref myres 1))
				     (set! res (vector-ref myres 2))
				     (loop)))))))
	;; (timeout (lambda ()
	;;     	(let loop ((n numretries))
	;;     	  (thread-sleep! 15)
	;;     	  (if (not res)
	;;     	      (if (> numretries 0)
	;;     		  (begin
	;;     		    (debug:print 2 "WARNING: no reply to query " params ", trying resend")
	;;     		    (debug:print-info 11 "re-sending message")
	;;     		    (send-message push-socket zdat)
	;;     		    (debug:print-info 11 "message re-sent")
	;;     		    (loop (- n 1)))
	;;     		  ;; (apply cdb:client-call *runremote* qtype immediate (- numretries 1) params))
	;;     		  (begin
	;;     		    (debug:print 0 "ERROR: cdb:client-call timed out " params ", exiting.")
	;;     		    (exit 5))))))))
	(debug:print-info 11 "Starting threads")
	(let ((th1 (make-thread send-receive "send receive"))
	      ;; (th2 (make-thread timeout      "timeout"))
	      )

	  (thread-start! th1)
	  ;; (thread-start! th2)
	  (thread-join!  th1)
	  (debug:print-info 11 "cdb:client-call returning res=" res)
	  res))))))

(define (cdb:set-verbosity serverdat val)
  (cdb:client-call serverdat 'set-verbosity #f *default-numtries* val))

(define (cdb:num-clients serverdat)
  (cdb:client-call serverdat 'numclients #t *default-numtries*))

(define (db:test-set-status-state db test-id status state msg)
  (if (member state '("LAUNCHED" "REMOTEHOSTSTART"))
      (db:general-call db 'set-test-start-time (list test-id)))
  (if msg
      (db:general-call db 'state-status-msg (list state status msg test-id))
      (db:general-call db 'state-status     (list state status test-id))))

(define (cdb:test-rollup-test_data-pass-fail serverdat test-id)
  (cdb:client-call serverdat 'test_data-pf-rollup #t *default-numtries* test-id test-id test-id test-id))

(define (cdb:pass-fail-counts serverdat test-id fail-count pass-count)
  (cdb:client-call serverdat 'pass-fail-counts #t *default-numtries* fail-count pass-count test-id))

(define (cdb:tests-register-test serverdat run-id test-name item-path)
  (cdb:client-call serverdat 'register-test #t *default-numtries* run-id test-name item-path))

;; more transactioned calls, these for roll-up-pass-fail stuff
(define (cdb:update-pass-fail-counts serverdat run-id test-name)
  (cdb:client-call serverdat 'update-fail-pass-counts #t *default-numtries* run-id test-name run-id test-name run-id test-name))

(define (cdb:top-test-set-running serverdat run-id test-name)
  (cdb:client-call serverdat 'top-test-set-running #t *default-numtries* run-id test-name))

(define (cdb:top-test-set-per-pf-counts serverdat run-id test-name)
  (cdb:client-call serverdat 'top-test-set-per-pf-counts #t *default-numtries* run-id test-name run-id test-name run-id test-name))

;;=


(define (cdb:flush-queue serverdat)
  (cdb:client-call serverdat 'flush #f *default-numtries*))

(define (cdb:kill-server serverdat pid)
  (cdb:client-call serverdat 'killserver #t *default-numtries* pid))

(define (cdb:roll-up-pass-fail-counts serverdat run-id test-name item-path status)
  (cdb:client-call serverdat 'immediate #f *default-numtries* open-run-close db:roll-up-pass-fail-counts #f run-id test-name item-path status))

(define (cdb:get-test-info serverdat run-id test-name item-path)
  (cdb:client-call serverdat 'immediate #f *default-numtries* open-run-close db:get-test-info #f run-id test-name item-path))

(define (cdb:get-test-info-by-id serverdat test-id)
  (let ((test-dat (cdb:client-call serverdat 'immediate #f *default-numtries* open-run-close db:get-test-info-by-id #f test-id)))
    (hash-table-set! *test-info* test-id (vector (current-seconds) test-dat)) ;; cached for use where up-to-date info is not needed
    test-dat))

;; ;; db should be db open proc or #f
;; (define (cdb:remote-run proc db . params)
;;   (if (or *db-write-access*
;; 	  (not (member proc *db:all-write-procs*)))
;;       (apply cdb:client-call *runremote* 'immediate #f *default-numtries* open-run-close proc #f params)
;;       (begin

(define *number-non-write-queries* 0)


;; The queue is a list of vectors where the zeroth slot indicates the type of query to
;; apply and the second slot is the time of the query and the third entry is a list of 
;; values to be applied
;;
(define (db:queue-write-and-wait db qry-sig query params)
  (let ((queue-len  0)
	(res        #f)
	(got-it     #f)
	(qry-pkt    (vector qry-sig query params))
	(start-time (current-milliseconds))
	(timeout    (+ 10 (current-seconds)))) ;; set the time out to 10 secs in future

    ;; Put the item in the queue *incoming-writes* 
    (mutex-lock! *incoming-mutex*)
    (set! *incoming-writes* (cons qry-pkt *incoming-writes*))
    (set! queue-len (length *incoming-writes*))
    (mutex-unlock! *incoming-mutex*)

    (debug:print-info 7 "Current write queue length is " queue-len)

    ;; poll for the write to complete, timeout after 10 seconds
    ;; periodic flushing of the queue is taken care of by 
    ;; db:flush-queue
    (let loop ()
      (thread-sleep! 0.001)
      (mutex-lock! *completed-mutex*)
      (if (hash-table-ref/default *completed-writes* qry-sig #f)
	  (begin
	    (hash-table-delete! *completed-writes* qry-sig)
	    (set! got-it #t)))
      (mutex-unlock! *completed-mutex*)
      (if (and (not got-it)
	       (< (current-seconds) timeout))
	  (begin
	    (thread-sleep! 0.01)
	    (loop))))
    (set! *number-of-writes*   (+ *number-of-writes*   1))
    (set! *writes-total-delay* (+ *writes-total-delay* (- (current-milliseconds) start-time)))
    got-it))

(define (db:general-call db stmtname params)
  (let ((query (let ((q (alist-ref (if (string? stmtname)
				       (string->symbol stmtname)
				       stmtname)
				   db:queries)))
		 (if q (car q) #f))))

			   (hash-table-set! tests-hash full-testname testdat))))
		   results)
		  (if (null? tal)
		      (map cdr (hash-table->alist tests-hash)) ;; return a list of the most recent tests
		      (loop (car tal)(cdr tal))))))))))


(define (db:process-queue-item db item)
  (let* ((stmt-key       (cdb:packet-get-qtype item))
	 (qry-sig        (cdb:packet-get-query-sig item))
	 (return-address (cdb:packet-get-client-sig item))
	 (params         (cdb:packet-get-params item))
	 (query          (let ((q (alist-ref stmt-key db:queries)))
			   (if q (car q) #f))))
    (debug:print-info 11 "Special queries/requests stmt-key=" stmt-key ", return-address=" return-address ", query=" query ", params=" params)
    (if query
	;; hand queries off to the write queue
	(let ((response (case *transport-type*
			  ((http)
			   (debug:print-info 7 "Queuing item " item " for wrapped write")
			   (db:queue-write-and-wait db qry-sig query params))
			  (else 
			   (apply sqlite3:execute db query params)
			   #t))))
	  (debug:print-info 7 "Received " response " from wrapped write")
	  (server:reply return-address qry-sig response response))
	;; otherwise if appropriate flush the queue (this is a read or complex query)
	(begin
	  (cond
	   ((member stmt-key db:special-queries)
	    (let ((starttime (current-milliseconds)))
	      (debug:print-info 9 "Handling special statement " stmt-key)
	      (case stmt-key
		((immediate)
		 (debug:print 0 "WARNING: Immediate calls are verboten now!")
		 (let* ((proc      (car params))
			(remparams (cdr params))
			;; we are being handed a procedure so call it
			(result (server:reply return-address qry-sig #t (apply proc remparams))))
		   (debug:print-info 11 "Ran (apply " proc " " remparams ")")
		   ;; (set! *total-non-write-delay* (+ *total-non-write-delay* (- (current-milliseconds) starttime))) 
		   ;; (set! *number-non-write-queries* (+ *number-non-write-queries* 1))
		   result))
		((login)
		 (if (< (length params) 3) ;; should get toppath, version and signature
		     (server:reply return-address qry-sig '(#f "login failed due to missing params")) ;; missing params
		     (let ((calling-path (car   params))
			   (calling-vers (cadr  params))
			   (client-key   (caddr params)))
		       (if (and (equal? calling-path *toppath*)
				(equal? megatest-version calling-vers))
			   (begin
			     (hash-table-set! *logged-in-clients* client-key (current-seconds))
			     (server:reply return-address qry-sig #t '(#t "successful login")))      ;; path matches - pass! Should vet the caller at this time ...
			   (server:reply return-address qry-sig #f (list #f (conc "Login failed due to mismatch paths: " calling-path ", " *toppath*)))))))
		((flush sync)
		 (server:reply return-address qry-sig #t 1)) ;; (length data)))
		((set-verbosity)
		 (set! *verbosity* (car params))
		 (server:reply return-address qry-sig #t (list #t *verbosity*)))
		((killserver)
		 (db:sync-to *inmemdb* *db*)
		 (let ((hostname (car  *runremote*))
		       (port     (cadr *runremote*))
		       (pid      (car params))
		       (th1      (make-thread (lambda ()(thread-sleep! 3)(debug:print 0 "Server exiting!")(exit 0)) "Server exit thread")))
		   (debug:print 0 "WARNING: Server on " hostname ":" port " going down by user request!")
		   (debug:print-info 1 "current pid=" (current-process-id))
		   (open-run-close tasks:server-deregister tasks:open-db 
				   hostname
				   port: port)
		   (set! *server-run* #f)
		   (thread-sleep! 3)
		   (if pid 
		       (process-signal pid signal/kill)
		       (thread-start! th1))
		   (server:reply return-address qry-sig #t '(#t "exit process started"))))
		(else ;; not a command, i.e. is a query
		 (debug:print 0 "ERROR: Unrecognised query/command " stmt-key)
		 (server:reply return-address qry-sig #f 'failed)))))
	   (else
	    (debug:print-info 11 "Executing " stmt-key " for " params)
	    (apply sqlite3:execute (hash-table-ref queries stmt-key) params)
	    (server:reply return-address qry-sig #t #t)))))))

(define (db:test-get-records-for-index-file db run-id test-name)
  (let ((res '()))
    (sqlite3:for-each-row 
     (lambda (id itempath state status run_duration logf comment)
       (set! res (cons (vector id itempath state status run_duration logf comment) res)))
     db

    (sqlite3:for-each-row
     (lambda (a . b)
       (set! res (cons (apply vector a b) res)))
     db
     "SELECT id,testname,author,owner,description,reviewed,iterated,avg_runtime,avg_disk,tags,jobgroup FROM test_meta;")
    res))

;;======================================================================
;; T E S T   D A T A 
;;======================================================================

(define (db:csv->test-data db test-id csvdata #!key (work-area #f))
  (debug:print 4 "test-id " test-id ", csvdata: " csvdata)
  (let ((tdb     (db:open-test-db-by-test-id db test-id work-area: work-area)))
    (if (sqlite3:database? tdb)
	(let ((csvlist (csv->list (make-csv-reader
				   (open-input-string csvdata)
				   '((strip-leading-whitespace? #t)
				     (strip-trailing-whitespace? #t)) )))) ;; (csv->list csvdata)))
	  (for-each 
	   (lambda (csvrow)
	     (let* ((padded-row  (take (append csvrow (list #f #f #f #f #f #f #f #f #f)) 9))
		    (category    (list-ref padded-row 0))
		    (variable    (list-ref padded-row 1))
		    (value       (any->number-if-possible (list-ref padded-row 2)))
		    (expected    (any->number-if-possible (list-ref padded-row 3)))
		    (tol         (any->number-if-possible (list-ref padded-row 4))) ;; >, <, >=, <=, or a number
		    (units       (list-ref padded-row 5))
		    (comment     (list-ref padded-row 6))
		    (status      (let ((s (list-ref padded-row 7)))
				   (if (and (string? s)(or (string-match (regexp "^\\s*$") s)
							   (string-match (regexp "^n/a$") s)))
				       #f
				       s))) ;; if specified on the input then use, else calculate
		    (type        (list-ref padded-row 8)))
	       ;; look up expected,tol,units from previous best fit test if they are all either #f or ''
	       (debug:print 4 "BEFORE: category: " category " variable: " variable " value: " value 
			    ", expected: " expected " tol: " tol " units: " units " status: " status " comment: " comment " type: " type)

	       (if (and (or (not expected)(equal? expected ""))
			(or (not tol)     (equal? expected ""))
			(or (not units)   (equal? expected "")))
		   (let-values (((new-expected new-tol new-units)(db:get-prev-tol-for-test db test-id category variable)))
			       (set! expected new-expected)
			       (set! tol      new-tol)
			       (set! units    new-units)))

	       (debug:print 4 "AFTER:  category: " category " variable: " variable " value: " value 
			    ", expected: " expected " tol: " tol " units: " units " status: " status " comment: " comment)
	       ;; calculate status if NOT specified
	       (if (and (not status)(number? expected)(number? value)) ;; need expected and value to be numbers
		   (if (number? tol) ;; if tol is a number then we do the standard comparison
		       (let* ((max-val (+ expected tol))
			      (min-val (- expected tol))
			      (result  (and (>=  value min-val)(<= value max-val))))
			 (debug:print 4 "max-val: " max-val " min-val: " min-val " result: " result)
			 (set! status (if result "pass" "fail")))
		       (set! status ;; NB// need to assess each one (i.e. not return operator since need to act if not valid op.
			     (case (string->symbol tol) ;; tol should be >, <, >=, <=
			       ((>)  (if (>  value expected) "pass" "fail"))
			       ((<)  (if (<  value expected) "pass" "fail"))
			       ((>=) (if (>= value expected) "pass" "fail"))
			       ((<=) (if (<= value expected) "pass" "fail"))
			       (else (conc "ERROR: bad tol comparator " tol))))))
	       (debug:print 4 "AFTER2: category: " category " variable: " variable " value: " value 
			    ", expected: " expected " tol: " tol " units: " units " status: " status " comment: " comment)
	       (sqlite3:execute tdb "INSERT OR REPLACE INTO test_data (test_id,category,variable,value,expected,tol,units,comment,status,type) VALUES (?,?,?,?,?,?,?,?,?,?);"
				test-id category variable value expected tol units (if comment comment "") status type)))
	   csvlist)
	  (sqlite3:finalize! tdb)))))

;; get a list of test_data records matching categorypatt
(define (db:read-test-data db test-id categorypatt #!key (work-area #f))
  (let ((tdb  (db:open-test-db-by-test-id db test-id work-area: work-area)))
    (if (sqlite3:database? tdb)
	(let ((res '()))
	  (sqlite3:for-each-row 
	   (lambda (id test_id category variable value expected tol units comment status type)
	     (set! res (cons (vector id test_id category variable value expected tol units comment status type) res)))
	   tdb
	   "SELECT id,test_id,category,variable,value,expected,tol,units,comment,status,type FROM test_data WHERE test_id=? AND category LIKE ? ORDER BY category,variable;" test-id categorypatt)
	  (sqlite3:finalize! tdb)
	  (reverse res))
	'())))

;; NOTE: Run this local with #f for db !!!
(define (db:load-test-data db test-id #!key (work-area #f))
  (let loop ((lin (read-line)))
    (if (not (eof-object? lin))
	(begin
	  (debug:print 4 lin)
	  (db:csv->test-data db test-id lin work-area: work-area)
	  (loop (read-line)))))
  ;; roll up the current results.
  ;; FIXME: Add the status to 
  (db:test-data-rollup db test-id #f work-area: work-area))

;; WARNING: Do NOT call this for the parent test on an iterated test
;; Roll up test_data pass/fail results
;; look at the test_data status field, 
;;    if all are pass (any case) and the test status is PASS or NULL or '' then set test status to PASS.
;;    if one or more are fail (any case) then set test status to PASS, non "pass" or "fail" are ignored
(define (db:test-data-rollup db test-id status #!key (work-area #f))
  (let ((tdb (db:open-test-db-by-test-id db test-id work-area: work-area))
	(fail-count 0)
	(pass-count 0))
    (if (sqlite3:database? tdb)
	(begin
	  (sqlite3:for-each-row
	   (lambda (fcount pcount)
	     (set! fail-count fcount)
	     (set! pass-count pcount))
	   tdb 
	   "SELECT (SELECT count(id) FROM test_data WHERE test_id=? AND status like 'fail') AS fail_count,
                   (SELECT count(id) FROM test_data WHERE test_id=? AND status like 'pass') AS pass_count;"
	   test-id test-id)
	  (sqlite3:finalize! tdb)

	  ;; Now rollup the counts to the central megatest.db
	  (cdb:pass-fail-counts *runremote* test-id fail-count pass-count)
	  ;; (sqlite3:execute db "UPDATE tests SET fail_count=?,pass_count=? WHERE id=?;" 
	  ;;                     fail-count pass-count test-id)

	  ;; The flush is not needed with the transaction based write agregation enabled. Remove these commented lines
	  ;; next time you read this!
	  ;;
	  ;; (cdb:flush-queue *runremote*)
	  ;; (thread-sleep! 1) ;; play nice with the queue by ensuring the rollup is at least 10ms later than the set
	  
	  ;; if the test is not FAIL then set status based on the fail and pass counts.
	  (cdb:test-rollup-test_data-pass-fail *runremote* test-id)
	  ;; (sqlite3:execute
	  ;;  db   ;;; NOTE: Should this be WARN,FAIL? A WARN is not a FAIL????? BUG FIXME
	  ;;  "UPDATE tests
	  ;;             SET status=CASE WHEN (SELECT fail_count FROM tests WHERE id=?) > 0 
	  ;;                THEN 'FAIL'
	  ;;             WHEN (SELECT pass_count FROM tests WHERE id=?) > 0 AND 
	  ;;                  (SELECT status FROM tests WHERE id=?) NOT IN ('WARN','FAIL')
	  ;;             THEN 'PASS'
	  ;;             ELSE status
	  ;;         END WHERE id=?;"
	  ;;  test-id test-id test-id test-id)
	  ))))

(define (db:get-prev-tol-for-test db test-id category variable)
  ;; Finish me?
  (values #f #f #f))

;;======================================================================
;; S T E P S 
;;======================================================================

(define (db:step-get-time-as-string vec)
  (seconds->time-string (db:step-get-event_time vec)))

;; db-get-test-steps-for-run
(define (db:get-steps-for-test db test-id #!key (work-area #f))
  (let* ((tdb (db:open-test-db-by-test-id db test-id work-area: work-area))
	 (res '()))
    (if (sqlite3:database? tdb)
	(handle-exceptions
	 exn
	 (begin
	   (debug:print 0 "ERROR: error on access to testdat for test with id " test-id)
	   '())
	 (begin
	   (sqlite3:for-each-row 
	    (lambda (id test-id stepname state status event-time logfile)
	      (set! res (cons (vector id test-id stepname state status event-time (if (string? logfile) logfile "")) res)))
	    tdb
	    "SELECT id,test_id,stepname,state,status,event_time,logfile FROM test_steps WHERE test_id=? ORDER BY id ASC;" ;; event_time DESC,id ASC;
	    test-id)
	   (sqlite3:finalize! tdb)
	   (reverse res)))
	'())))

;; get a pretty table to summarize steps
;;
(define (db:get-steps-table db test-id #!key (work-area #f))
  (let ((steps   (db:get-steps-for-test db test-id work-area: work-area)))
    ;; organise the steps for better readability
    (let ((res (make-hash-table)))
      (for-each 
       (lambda (step)
	 (debug:print 6 "step=" step)
	 (let ((record (hash-table-ref/default 
			res 
			(db:step-get-stepname step) 
			;;        stepname                start end status Duration  Logfile 
			(vector (db:step-get-stepname step) ""   "" ""     ""        ""))))
	   (debug:print 6 "record(before) = " record 
			"\nid:       " (db:step-get-id step)
			"\nstepname: " (db:step-get-stepname step)
			"\nstate:    " (db:step-get-state step)
			"\nstatus:   " (db:step-get-status step)
			"\ntime:     " (db:step-get-event_time step))
	   (case (string->symbol (db:step-get-state step))
	     ((start)(vector-set! record 1 (db:step-get-event_time step))
	      (vector-set! record 3 (if (equal? (vector-ref record 3) "")
					(db:step-get-status step)))
	      (if (> (string-length (db:step-get-logfile step))
		     0)
		  (vector-set! record 5 (db:step-get-logfile step))))
	     ((end)  
	      (vector-set! record 2 (any->number (db:step-get-event_time step)))
	      (vector-set! record 3 (db:step-get-status step))
	      (vector-set! record 4 (let ((startt (any->number (vector-ref record 1)))
					  (endt   (any->number (vector-ref record 2))))
				      (debug:print 4 "record[1]=" (vector-ref record 1) 
						   ", startt=" startt ", endt=" endt
						   ", get-status: " (db:step-get-status step))
				      (if (and (number? startt)(number? endt))
					  (seconds->hr-min-sec (- endt startt)) "-1")))
	      (if (> (string-length (db:step-get-logfile step))
		     0)
		  (vector-set! record 5 (db:step-get-logfile step))))
	     (else
	      (vector-set! record 2 (db:step-get-state step))
	      (vector-set! record 3 (db:step-get-status step))
	      (vector-set! record 4 (db:step-get-event_time step))))
	   (hash-table-set! res (db:step-get-stepname step) record)
	   (debug:print 6 "record(after)  = " record 
			"\nid:       " (db:step-get-id step)
			"\nstepname: " (db:step-get-stepname step)
			"\nstate:    " (db:step-get-state step)
			"\nstatus:   " (db:step-get-status step)
			"\ntime:     " (db:step-get-event_time step))))
       ;; (else   (vector-set! record 1 (db:step-get-event_time step)))
       (sort steps (lambda (a b)
		     (cond
		      ((<   (db:step-get-event_time a)(db:step-get-event_time b)) #t)
		      ((eq? (db:step-get-event_time a)(db:step-get-event_time b)) 
		       (<   (db:step-get-id a)        (db:step-get-id b)))
		      (else #f)))))
      res)))

;; get a pretty table to summarize steps
;;
(define (db:get-steps-table-list db test-id #!key (work-area #f))
  (let ((steps   (db:get-steps-for-test db test-id work-area: work-area)))
    ;; organise the steps for better readability
    (let ((res (make-hash-table)))
      (for-each 
       (lambda (step)
	 (debug:print 6 "step=" step)
	 (let ((record (hash-table-ref/default 
			res 
			(db:step-get-stepname step) 
			;;        stepname                start end status    
			(vector (db:step-get-stepname step) ""   "" ""     "" ""))))
	   (debug:print 6 "record(before) = " record 
			"\nid:       " (db:step-get-id step)
			"\nstepname: " (db:step-get-stepname step)
			"\nstate:    " (db:step-get-state step)
			"\nstatus:   " (db:step-get-status step)
			"\ntime:     " (db:step-get-event_time step))
	   (case (string->symbol (db:step-get-state step))
	     ((start)(vector-set! record 1 (db:step-get-event_time step))
	      (vector-set! record 3 (if (equal? (vector-ref record 3) "")
					(db:step-get-status step)))
	      (if (> (string-length (db:step-get-logfile step))
		     0)
		  (vector-set! record 5 (db:step-get-logfile step))))
	     ((end)  
	      (vector-set! record 2 (any->number (db:step-get-event_time step)))
	      (vector-set! record 3 (db:step-get-status step))
	      (vector-set! record 4 (let ((startt (any->number (vector-ref record 1)))
					  (endt   (any->number (vector-ref record 2))))
				      (debug:print 4 "record[1]=" (vector-ref record 1) 
						   ", startt=" startt ", endt=" endt
						   ", get-status: " (db:step-get-status step))
				      (if (and (number? startt)(number? endt))
					  (seconds->hr-min-sec (- endt startt)) "-1")))
	      (if (> (string-length (db:step-get-logfile step))
		     0)
		  (vector-set! record 5 (db:step-get-logfile step))))
	     (else
	      (vector-set! record 2 (db:step-get-state step))
	      (vector-set! record 3 (db:step-get-status step))
	      (vector-set! record 4 (db:step-get-event_time step))))
	   (hash-table-set! res (db:step-get-stepname step) record)
	   (debug:print 6 "record(after)  = " record 
			"\nid:       " (db:step-get-id step)
			"\nstepname: " (db:step-get-stepname step)
			"\nstate:    " (db:step-get-state step)
			"\nstatus:   " (db:step-get-status step)
			"\ntime:     " (db:step-get-event_time step))))
       ;; (else   (vector-set! record 1 (db:step-get-event_time step)))
       (sort steps (lambda (a b)
		     (cond
		      ((<   (db:step-get-event_time a)(db:step-get-event_time b)) #t)
		      ((eq? (db:step-get-event_time a)(db:step-get-event_time b)) 
		       (<   (db:step-get-id a)        (db:step-get-id b)))
		      (else #f)))))
      res)))

(define (db:get-compressed-steps test-id #!key (work-area #f)(tdb #f))
  (if (or (not work-area)
	  (file-exists? (conc work-area "/testdat.db")))
      (let* ((comprsteps (open-run-close db:get-steps-table tdb test-id work-area: work-area)))
	(map (lambda (x)
	       ;; take advantage of the \n on time->string
	       (vector
		(vector-ref x 0)
		(let ((s (vector-ref x 1)))
		  (if (number? s)(seconds->time-string s) s))
		(let ((s (vector-ref x 2)))
		  (if (number? s)(seconds->time-string s) s))
		(vector-ref x 3)    ;; status
		(vector-ref x 4)
		(vector-ref x 5)))  ;; time delta
	     (sort (hash-table-values comprsteps)
		   (lambda (a b)
		     (let ((time-a (vector-ref a 1))
			   (time-b (vector-ref b 1)))
		       (if (and (number? time-a)(number? time-b))
			   (if (< time-a time-b)
			       #t
			       (if (eq? time-a time-b)
				   (string<? (conc (vector-ref a 2))
					     (conc (vector-ref b 2)))
				   #f))
			   (string<? (conc time-a)(conc time-b))))))))
      '()))

;;======================================================================
;; M I S C   M A N A G E M E N T   I T E M S 
;;======================================================================

;; the new prereqs calculation, looks also at itempath if specified
;; all prereqs must be met:
;;    if prereq test with itempath='' is COMPLETED and PASS, WARN, CHECK, or WAIVED then prereq is met
;;    if prereq test with itempath=ref-item-path and COMPLETED with PASS, WARN, CHECK, or WAIVED then prereq is met
;;
;; Note: mode 'normal means that tests must be COMPLETED and ok (i.e. PASS, WARN, CHECK, SKIP or WAIVED)
;;       mode 'toplevel means that tests must be COMPLETED only
;;       mode 'itemmatch or 'itemwait means that tests items must be COMPLETED and (PASS|WARN|WAIVED|CHECK) [[ NB// NOT IMPLEMENTED YET ]]
;; 
(define (db:get-prereqs-not-met run-id waitons ref-item-path #!key (mode 'normal))
  (if (or (not waitons)
	  (null? waitons))
      '()
      (let* ((unmet-pre-reqs '())
	     (result         '()))
	(for-each 
	 (lambda (waitontest-name)
	   ;; by getting the tests with matching name we are looking only at the matching test 
	   ;; and related sub items
	   ;; next should be using mt:get-tests-for-run?
	   (let ((tests             (cdb:remote-run db:get-tests-for-run-state-status #f run-id waitontest-name)) ;; (mt:get-tests-for-run run-id waitontest-name '() '()))
		 (ever-seen         #f)
		 (parent-waiton-met #f)
		 (item-waiton-met   #f))
	     (for-each 
	      (lambda (test)
		;; (if (equal? waitontest-name (db:test-get-testname test)) ;; by defintion this had better be true ...
		(let* ((state             (db:test-get-state test))

	     ;; if the test is not found then clearly the waiton is not met...
	     ;; (if (not ever-seen)(set! result (cons waitontest-name result)))))
	     (if (not ever-seen)
		 (set! result (append (if (null? tests)(list waitontest-name) tests) result)))))
	 waitons)
	(delete-duplicates result))))

(define (db:teststep-set-status! db test-id teststep-name state-in status-in comment logfile #!key (work-area #f))
  ;;                 db:open-test-db-by-test-id does cdb:remote-run
  (let* ((tdb       (db:open-test-db-by-test-id db test-id work-area: work-area))
	 (state     (items:check-valid-items "state" state-in))
	 (status    (items:check-valid-items "status" status-in)))
    (if (or (not state)(not status))
	(debug:print 3 "WARNING: Invalid " (if status "status" "state")
		     " value \"" (if status state-in status-in) "\", update your validvalues section in megatest.config"))
    (if (sqlite3:database? tdb)
	(begin
	  (sqlite3:execute 
	   tdb
	   "INSERT OR REPLACE into test_steps (test_id,stepname,state,status,event_time,comment,logfile) VALUES(?,?,?,?,?,?,?);"
	   test-id teststep-name state-in status-in (current-seconds) (if comment comment "") (if logfile logfile ""))
	  (sqlite3:finalize! tdb)
	  #t)
	#f)))

;;======================================================================
;; Extract ods file from the db
;;======================================================================

;; runspatt is a comma delimited list of run patterns
;; keypatt-alist must contain *all* keys with an associated pattern: '( ("KEY1" "%") .. )
(define (db:extract-ods-file db outputfile keypatt-alist runspatt pathmod)

    ;; brutal clean up
    (system "rm -rf tempdir")))

;; (db:extract-ods-file db "outputfile.ods" '(("sysname" "%")("fsname" "%")("datapath" "%")) "%")

;; This is a list of all procs that write to the db
;;
(define *db:all-write-procs*
  (list 
   db:set-var 
   db:del-var
   db:register-run
   db:set-comment-for-run
   db:delete-run
   db:update-run-event_time
   db:lock/unlock-run 
   db:delete-test-step-records
   db:delete-test-records
   db:delete-tests-for-run
   db:delete-old-deleted-test-records
   db:set-tests-state-status
   db:test-set-state-status-by-id
   db:test-set-state-status-by-run-id-testname
   db:testmeta-add-record
   db:csv->test-data
   db:test-data-rollup
   db:teststep-set-status! ))