Megatest

Artifact [a6ce176766]
Login

Artifact a6ce176766bc699dab8f876218d577e87bedde7b:


;; Copyright 2006-2012, Matthew Welland.
;; 
;;  This program is made available under the GNU GPL version 2.0 or
;;  greater. See the accompanying file COPYING for details.
;; 
;;  This program is distributed WITHOUT ANY WARRANTY; without even the
;;  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
;;  PURPOSE.

;;  strftime('%m/%d/%Y %H:%M:%S','now','localtime')

(use sqlite3 srfi-1 posix regex regex-case srfi-69 dot-locking format)
(import (prefix sqlite3 sqlite3:))

(declare (unit tasks))
(declare (uses db))
(declare (uses common))

(include "task_records.scm")

;;======================================================================
;; Tasks db
;;======================================================================

;; wait up to aprox n seconds for a journal to go away
;;
(define (tasks:wait-on-journal path n #!key (remove #f))
  (let ((fullpath (conc path "-journal")))
    (let loop ((journal-exists (file-exists? fullpath))
	       (count          n)) ;; wait ten times ...
      (if journal-exists
	  (if (> count 0)
	      (begin
		(thread-sleep! 1)
		(loop (file-exists? fullpath)
		      (- count 1)))
	      (begin
		(if remove (system (conc "rm -rf " path)))
		#f))
	  #t))))

;; If file exists AND
;;    file readable
;;         ==> open it
;; If file exists AND
;;    file NOT readable
;;         ==> open in-mem version
;; If file NOT exists
;;    ==> open in-mem version
;;
(define (tasks:open-db)
  (let* ((linktree     (configf:lookup *configdat* "setup" "linktree"))
	 (dbpath       (conc linktree "/.db/monitor.db"))
	 (avail        (tasks:wait-on-journal dbpath 10)) ;; wait up to about 10 seconds for the journal to go away
	 (exists       (file-exists? dbpath))
	 (write-access (file-write-access? dbpath))
	 (mdb          (cond
			((file-write-access? *toppath*)(sqlite3:open-database dbpath))
			((file-read-access? dbpath)    (sqlite3:open-database dbpath))
			(else (sqlite3:open-database ":memory:")))) ;; (never-give-up-open-db dbpath))
	 (handler      (make-busy-timeout 36000)))
    (if (and exists
	     (not write-access))
	(set! *db-write-access* write-access)) ;; only unset so other db's also can use this control
    (sqlite3:set-busy-handler! mdb handler)
    (sqlite3:execute mdb (conc "PRAGMA synchronous = 0;"))
    (if (or (and (not exists)
		 (file-write-access? *toppath*))
	    (not (file-read-access? dbpath)))
	(begin
	  (sqlite3:execute mdb "CREATE TABLE IF NOT EXISTS tasks_queue (id INTEGER PRIMARY KEY,
                                action TEXT DEFAULT '',
                                owner TEXT,
                                state TEXT DEFAULT 'new',
                                target TEXT DEFAULT '',
                                name TEXT DEFAULT '',
                                testpatt TEXT DEFAULT '',
                                keylock TEXT,
                                params TEXT,
                                creation_time TIMESTAMP,
                                execution_time TIMESTAMP);")
	  (sqlite3:execute mdb "CREATE TABLE IF NOT EXISTS monitors (id INTEGER PRIMARY KEY,
                                pid INTEGER,
                                start_time TIMESTAMP,
                                last_update TIMESTAMP,
                                hostname TEXT,
                                username TEXT,
                               CONSTRAINT monitors_constraint UNIQUE (pid,hostname));")
	  (sqlite3:execute mdb "CREATE TABLE IF NOT EXISTS servers (id INTEGER PRIMARY KEY,
                                  pid INTEGER,
                                  interface TEXT,
                                  hostname TEXT,
                                  port INTEGER,
                                  pubport INTEGER,
                                  start_time TIMESTAMP,
                                  priority INTEGER,
                                  state TEXT,
                                  mt_version TEXT,
                                  heartbeat TIMESTAMP,
                                  transport TEXT,
                                  run_id INTEGER);")
;;                               CONSTRAINT servers_constraint UNIQUE (pid,hostname,port));")
	  (sqlite3:execute mdb "CREATE TABLE IF NOT EXISTS clients (id INTEGER PRIMARY KEY,
                                  server_id INTEGER,
                                  pid INTEGER,
                                  hostname TEXT,
                                  cmdline TEXT,
                                  login_time TIMESTAMP,
                                  logout_time TIMESTAMP DEFAULT -1,
                                CONSTRAINT clients_constraint UNIQUE (pid,hostname));")
                                  
	  ))
    mdb))
    
;;======================================================================
;; Server and client management
;;======================================================================

;; make-vector-record tasks hostinfo id interface port pubport transport pid hostname
(define (tasks:hostinfo-get-id          vec)    (vector-ref  vec 0))
(define (tasks:hostinfo-get-interface   vec)    (vector-ref  vec 1))
(define (tasks:hostinfo-get-port        vec)    (vector-ref  vec 2))
(define (tasks:hostinfo-get-pubport     vec)    (vector-ref  vec 3))
(define (tasks:hostinfo-get-transport   vec)    (vector-ref  vec 4))
(define (tasks:hostinfo-get-pid         vec)    (vector-ref  vec 5))
(define (tasks:hostinfo-get-hostname    vec)    (vector-ref  vec 6))

(define (tasks:server-lock-slot mdb run-id)
  (tasks:server-clean-out-old-records-for-run-id mdb run-id " tasks:server-lock-slot")
  (if (< (tasks:num-in-available-state mdb run-id) 4)
      (begin 
	(tasks:server-set-available mdb run-id)
	(thread-sleep! 2) ;; Try removing this. It may not be needed.
	(tasks:server-am-i-the-server? mdb run-id))
      #f))
	
;; register that this server may come online (first to register goes though with the process)
(define (tasks:server-set-available mdb run-id)
  (sqlite3:execute 
   mdb 
   "INSERT INTO servers (pid,hostname,port,pubport,start_time,      priority,state,mt_version,heartbeat,   interface,transport,run_id)
                   VALUES(?, ?,       ?,   ?, strftime('%s','now'), ?,       ?,    ?,-1,?,        ?,        ?);"
   (current-process-id)       ;; pid
   (get-host-name)            ;; hostname
   -1                         ;; port
   -1                         ;; pubport
   (random 1000)              ;; priority (used a tiebreaker on get-available)
   "available"                ;; state
   (common:version-signature) ;; mt_version
   -1                         ;; interface
   "http"                     ;; transport
   run-id
   ))

(define (tasks:num-in-available-state mdb run-id)
  (let ((res 0))
    (sqlite3:for-each-row
     (lambda (num-in-queue)
       (set! res num-in-queue))
     mdb
     "SELECT count(id) FROM servers WHERE run_id=? AND state = 'available' AND (strftime('%s','now') - start_time) < 30 ;"
     run-id)
    res))

(define (tasks:num-servers-non-zero-running mdb)
  (let ((res 0))
    (sqlite3:for-each-row
     (lambda (num-running)
       (set! res num-running))
     mdb
     "SELECT count(id) FROM servers WHERE run_id != 0 AND state = 'running';")
    res))

(define (tasks:server-clean-out-old-records-for-run-id mdb run-id tag)
  (sqlite3:execute mdb "UPDATE servers SET state=?,heartbeat=strftime('%s','now') WHERE state in ('available','dbprep','shutting-down') AND (strftime('%s','now') - start_time) > 50 AND run_id=?;"
		   (conc "defunct" tag) run-id))

(define (tasks:server-force-clean-running-records-for-run-id mdb run-id tag)
  (sqlite3:execute mdb "UPDATE servers SET state=?,heartbeat=strftime('%s','now') WHERE state = 'running' AND run_id=?;"
		   (conc "defunct" tag) run-id))

(define (tasks:server-force-clean-run-record mdb run-id iface port tag)
  (sqlite3:execute mdb "UPDATE servers SET state=?,heartbeat=strftime('%s','now') WHERE state = 'running' AND run_id=? AND interface=? AND port=?;"
		   (conc "defunct" tag) run-id iface port))

(define (tasks:server-delete-records-for-this-pid mdb tag)
  (sqlite3:execute mdb "UPDATE servers SET state=?,heartbeat=strftime('%s','now') WHERE hostname=? AND pid=?;"
		   (conc "defunct" tag) (get-host-name) (current-process-id)))

(define (tasks:server-delete-record mdb server-id tag) 
  (sqlite3:execute mdb "UPDATE servers SET state=?,heartbeat=strftime('%s','now') WHERE id=?;"
		   (conc "defunct" tag) server-id)
  ;; use this opportuntity to clean out records over one month old or over 10 minutes old with port = -1 (i.e. a never used placeholder)
  (sqlite3:execute mdb "DELETE FROM servers WHERE state not in ('running','shutting-down','dbprep') AND (strftime('%s','now') - start_time) > 2628000;")
  (sqlite3:execute mdb "DELETE FROM servers WHERE state like 'defunct%' AND port=-1 AND (strftime('%s','now') - start_time) > 600;")
  )

(define (tasks:server-set-state! mdb server-id state)
  (sqlite3:execute mdb "UPDATE servers SET state=?,heartbeat=strftime('%s','now') WHERE id=?;" state server-id))

(define (tasks:server-set-interface-port mdb server-id interface port)
  (sqlite3:execute mdb "UPDATE servers SET interface=?,port=?,heartbeat=strftime('%s','now') WHERE id=?;" interface port server-id))

;; Get random port not used in long time
;;
(define (tasks:server-get-next-port mdb)
  (let* ((lownum        30000)
	(highnum        64000)
	(used-ports     '())
	(get-rand-port  (lambda ()
			  (+ lownum (random (- highnum lownum)))))
	(port-param     (if (and (args:get-arg "-port")
				 (string->number (args:get-arg "-port")))
			    (string->number (args:get-arg "-port"))
			    #f))
	;; (config-port    (if (and (config-lookup  *configdat* "server" "port")
	;; 			 (string->number (config-lookup  *configdat* "server" "port")))
	;; 		    (string->number (config-lookup  *configdat* "server" "port"))
	;; 		    #f))
	)
    (sqlite3:for-each-row
     (lambda (port)
       (set! used-ports (cons port used-ports)))
     mdb
     "SELECT port FROM servers;")
    (cond
     ((and port-param res)   (if (> res port-param) res port-param))
     (port-param             port-param)
     ;; ((and config-port res)  (if (> res config-port) res config-port))
     ;; (config-port            config-port)
     (else
      (let loop ((port     (get-rand-port))
		 (remtries 100))
	(if (member port used-ports)
	    (if (> remtries 0)
		(loop (get-rand-port)(- remtries 1))
		(get-rand-port))
	    port))))))

(define (tasks:server-am-i-the-server? mdb run-id)
  (let* ((all    (tasks:server-get-servers-vying-for-run-id mdb run-id))
	 (first  (if (null? all)
		     (begin (debug:print 0 "ERROR: no servers listed, should be at least one by now.") 
			    (sqlite3:finalize! mdb)
			    (exit 1))
		     (car (db:get-rows all))))
	 (header   (db:get-header all))
	 (id       (db:get-value-by-header first header "id"))
	 (hostname (db:get-value-by-header first header "hostname"))
	 (pid      (db:get-value-by-header first header "pid"))
	 (priority (db:get-value-by-header first header "priority")))
    (debug:print 0 "INFO: am-i-the-server got record " first)
    ;; for now a basic check. add tiebreaking by priority later
    (if (and (equal? hostname (get-host-name))
	     (equal? pid      (current-process-id)))
	id
	#f)))
	     
;; Use: (db:get-value-by-header (car (db:get-rows dat)) (db:get-header dat) "fieldname")
;;  to extract info from the structure returned
;;
(define (tasks:server-get-servers-vying-for-run-id mdb run-id)
   (let* ((header (list "id" "hostname" "pid" "interface" "port" "pubport" "state" "run_id" "priority" "start_time"))
	  (selstr (string-intersperse header ","))
	  (res    '()))
    (sqlite3:for-each-row
     (lambda (a . b)
       (set! res (cons (apply vector a b) res)))
     mdb
     (conc "SELECT " selstr " FROM servers WHERE run_id=? AND state in ('available','running','dbprep') ORDER BY start_time DESC;")
     run-id)
    (vector header res)))

(define (tasks:get-server mdb run-id)
  (let ((res  #f)
	(best #f))
    (sqlite3:for-each-row
     (lambda (id interface port pubport transport pid hostname)
       (set! res (vector id interface port pubport transport pid hostname)))
     mdb
     ;; removed:
     ;; strftime('%s','now')-heartbeat < 10 AND mt_version = ?
     "SELECT id,interface,port,pubport,transport,pid,hostname FROM servers
          WHERE run_id=? AND state='running'
          ORDER BY start_time DESC LIMIT 1;" run-id) ;; (common:version-signature) run-id)
    res))

(define (tasks:server-running-or-starting? mdb run-id)
  (let ((res #f))
    (sqlite3:for-each-row
     (lambda (id)
       (set! res id))
     mdb ;; NEEDS dbprep ADDED
     "SELECT id FROM servers WHERE run_id=? AND (state = 'running' OR (state = 'dbprep' AND  (strftime('%s','now') - start_time) < 60));" run-id)
    res))

(define (tasks:get-all-servers mdb)
  (let ((res '()))
    (sqlite3:for-each-row
     (lambda (id pid hostname interface port pubport start-time priority state mt-version last-update transport run-id)
       ;;                       0  1     2         3      4     5          6        7     8          9          10        11     12
       (set! res (cons (vector id pid hostname interface port pubport start-time priority state mt-version last-update transport run-id) res)))
     mdb
     "SELECT id,pid,hostname,interface,port,pubport,start_time,priority,state,mt_version,strftime('%s','now')-heartbeat AS last_update,transport,run_id FROM servers WHERE state NOT LIKE 'defunct%' ORDER BY start_time DESC;")
    res))

;; no elegance here ...
;;
(define (tasks:kill-server hostname pid)
  (debug:print-info 0 "Attempting to kill server process " pid " on host " hostname)
  (setenv "TARGETHOST" hostname)
  (system (conc "nbfake kill " pid)))
 
;;   (if status ;; #t means alive
;;       (begin
;; 	(if (equal? hostname (get-host-name))
;; 	    (handle-exceptions
;; 	     exn
;; 	     (debug:print-info 0 "server may or may not be dead, check for megatest -server running as pid " pid "\n"
;; 			       "  EXCEPTION: " ((condition-property-accessor 'exn 'message) exn))
;; 	     (debug:print 1 "Sending signal/term to " pid " on " hostname)
;; 	     (process-signal pid signal/term)
;; 	     (thread-sleep! 5) ;; give it five seconds to die peacefully then do a brutal kill
;; 	     ;;(process-signal pid signal/kill)
;; 	     ) ;; local machine, send sig term
;; 	    (begin
;; 	      ;;(debug:print-info 1 "Stopping remote servers not yet supported."))))
;; 	      (debug:print-info 1 "Telling alive server on " hostname ":" port " to commit servercide")
;; 	      (let ((serverdat (list hostname port)))
;; 		(hash-table-set! *runremote* run-id (http-transport:client-connect hostname port))
;; 	      	(cdb:kill-server serverdat pid)))))    ;; remote machine, try telling server to commit suicide
;;       (begin
;; 	(if status 
;; 	    (if (equal? hostname (get-host-name))
;; 		(begin
;; 		  (debug:print-info 1 "Sending signal/term to " pid " on " hostname)
;; 		  (process-signal pid signal/term)  ;; local machine, send sig term
;; 		  (thread-sleep! 5)                 ;; give it five seconds to die peacefully then do a brutal kill
;; 		  (process-signal pid signal/kill)) 
;; 		(debug:print 0 "WARNING: Can't kill frozen server on remote host " hostname))))))


;;======================================================================
;; Tasks and Task monitors
;;======================================================================


;;======================================================================
;; Tasks
;;======================================================================



;;======================================================================
;; Task Monitors
;;======================================================================

(define (tasks:register-monitor db mdb)
  (let* ((pid (current-process-id))
	 (hostname (get-host-name))
	 (userinfo (user-information (current-user-id)))
	 (username (car userinfo)))
    (print "Register monitor, pid: " pid ", hostname: " hostname ", username: " username)
    (sqlite3:execute mdb "INSERT INTO monitors (pid,start_time,last_update,hostname,username) VALUES (?,strftime('%s','now'),strftime('%s','now'),?,?);"
		     pid hostname username)))

(define (tasks:get-num-alive-monitors mdb)
  (let ((res 0))
    (sqlite3:for-each-row 
     (lambda (count)
       (set! res count))
     mdb
     "SELECT count(id) FROM monitors WHERE last_update < (strftime('%s','now') - 300) AND username=?;"
     (car (user-information (current-user-id))))
    res))

;; register a task
(define (tasks:add mdb action owner target runname testpatt params)
  (sqlite3:execute mdb "INSERT INTO tasks_queue (action,owner,state,target,name,testpatt,params,creation_time,execution_time)
                       VALUES (?,?,'new',?,?,?,?,?,strftime('%s','now'),0);" 
		   action
		   owner
		   target
		   runname
		   test
		   item
		   (if params params "")))

(define (keys:key-vals-hash->target keys key-params)
  (let ((tmp (hash-table-ref/default key-params (vector-ref (car keys) 0) "")))
    (if (> (length keys) 1)
	(for-each (lambda (key)
		    (set! tmp (conc tmp "/" (hash-table-ref/default key-params (vector-ref key 0) ""))))
		  (cdr keys)))
    tmp))
								
;; for use from the gui
(define (tasks:add-from-params mdb action keys key-params var-params)
  (let ((target    (keys:key-vals-hash->target keys key-params))
	(owner     (car (user-information (current-user-id))))
	(runname   (hash-table-ref/default var-params "runname" #f))
	(testpatts (hash-table-ref/default var-params "testpatts" "%"))
	(params    (hash-table-ref/default var-params "params"    "")))
    (tasks:add mdb action owner target runname testpatts params)))

;; return one task from those who are 'new' OR 'waiting' AND more than 10sec old
;;
(define (tasks:snag-a-task mdb)
  (let ((res    #f)
	(keytxt (conc (current-process-id) "-" (get-host-name) "-" (car (user-information (current-user-id))))))

    ;; first randomly set a new to pid-hostname-hostname
    (sqlite3:execute
     mdb 
     "UPDATE tasks_queue SET keylock=? WHERE id IN
        (SELECT id FROM tasks_queue 
           WHERE state='new' OR 
                 (state='waiting' AND (strftime('%s','now')-execution_time) > 10) OR
                 state='reset'
           ORDER BY RANDOM() LIMIT 1);" keytxt)

    (sqlite3:for-each-row
     (lambda (id . rem)
       (set! res (apply vector id rem)))
     mdb
     "SELECT id,action,owner,state,target,name,test,item,params,creation_time,execution_time FROM tasks_queue WHERE keylock=? ORDER BY execution_time ASC LIMIT 1;" keytxt)
    (if res ;; yep, have work to be done
	(begin
	  (sqlite3:execute mdb "UPDATE tasks_queue SET state='inprogress',execution_time=strftime('%s','now') WHERE id=?;"
			   (tasks:task-get-id res))
	  res)
	#f)))

(define (tasks:reset-stuck-tasks mdb)
  (let ((res '()))
    (sqlite3:for-each-row
     (lambda (id delta)
       (set! res (cons id res)))
     mdb
     "SELECT id,strftime('%s','now')-execution_time AS delta FROM tasks_queue WHERE state='inprogress' AND delta>700 ORDER BY delta DESC LIMIT 2;")
    (sqlite3:execute 
     mdb 
     (conc "UPDATE tasks_queue SET state='reset' WHERE id IN ('" (string-intersperse (map conc res) "','") "');"))))

;; return all tasks in the tasks_queue table
;;
(define (tasks:get-tasks mdb types states)
  (let ((res '()))
    (sqlite3:for-each-row
     (lambda (id . rem)
       (set! res (cons (apply vector id rem) res)))
     mdb
     (conc "SELECT id,action,owner,state,target,name,test,item,params,creation_time,execution_time 
               FROM tasks_queue "
               ;; WHERE  
               ;;   state IN " statesstr " AND 
	       ;;   action IN " actionsstr 
	   " ORDER BY creation_time DESC;"))
    res))

;; remove tasks given by a string of numbers comma separated
(define (tasks:remove-queue-entries mdb task-ids)
  (sqlite3:execute mdb (conc "DELETE FROM tasks_queue WHERE id IN (" task-ids ");")))

;; 
(define (tasks:start-monitor db mdb)
  (if (> (tasks:get-num-alive-monitors mdb) 2) ;; have two running, no need for more
      (debug:print-info 1 "Not starting monitor, already have more than two running")
      (let* ((megatestdb     (conc *toppath* "/megatest.db"))
	     (monitordbf     (conc (configf:lookup *configdat* "setup" "linktree") "/.db/monitor.db"))
	     (last-db-update 0)) ;; (file-modification-time megatestdb)))
	(task:register-monitor mdb)
	(let loop ((count      0)
		   (next-touch 0)) ;; next-touch is the time where we need to update last_update
	  ;; if the db has been modified we'd best look at the task queue
	  (let ((modtime (file-modification-time megatestdbpath )))
	    (if (> modtime last-db-update)
		(tasks:process-queue db mdb last-db-update megatestdb next-touch))
	    ;; WARNING: Possible race conditon here!!
	    ;; should this update be immediately after the task-get-action call above?
	    (if (> (current-seconds) next-touch)
		(begin
		  (tasks:monitors-update mdb)
		  (loop (+ count 1)(+ (current-seconds) 240)))
		(loop (+ count 1) next-touch)))))))
      
(define (tasks:process-queue db mdb)
  (let* ((task   (tasks:snag-a-task mdb))
	 (action (if task (tasks:task-get-action task) #f)))
    (if action (print "tasks:process-queue task: " task))
    (if action
	(case (string->symbol action)
	  ((run)       (tasks:start-run   db mdb task))
	  ((remove)    (tasks:remove-runs db mdb task))
	  ((lock)      (tasks:lock-runs   db mdb task))
	  ;; ((monitor)   (tasks:start-monitor db task))
	  ((rollup)    (tasks:rollup-runs db mdb task))
	  ((updatemeta)(tasks:update-meta db mdb task))
	  ((kill)      (tasks:kill-monitors db mdb task))))))

(define (tasks:get-monitors mdb)
  (let ((res '()))
    (sqlite3:for-each-row
     (lambda (a . rem)
       (set! res (cons (apply vector a rem) res)))
     mdb
     "SELECT id,pid,strftime('%m/%d/%Y %H:%M',datetime(start_time,'unixepoch'),'localtime'),strftime('%m/%d/%Y %H:%M:%S',datetime(last_update,'unixepoch'),'localtime'),hostname,username FROM monitors ORDER BY last_update ASC;")
    (reverse res)
    ))

(define (tasks:tasks->text tasks)
  (let ((fmtstr "~10a~10a~10a~12a~20a~12a~12a~10a"))
    (conc (format #f fmtstr "id" "action" "owner" "state" "target" "runname" "testpatts" "params") "\n"
	  (string-intersperse 
	   (map (lambda (task)
		  (format #f fmtstr
			  (tasks:task-get-id     task)
			  (tasks:task-get-action task)
			  (tasks:task-get-owner  task)
			  (tasks:task-get-state  task)
			  (tasks:task-get-target task)
			  (tasks:task-get-name   task)
			  (tasks:task-get-test   task)
			  ;; (tasks:task-get-item   task)
			  (tasks:task-get-params task)))
		tasks) "\n"))))
   
(define (tasks:monitors->text-table monitors)
  (let ((fmtstr "~4a~8a~20a~20a~10a~10a"))
    (conc (format #f fmtstr "id" "pid" "start time" "last update" "hostname" "user") "\n"
	  (string-intersperse 
	   (map (lambda (monitor)
		  (format #f fmtstr
			  (tasks:monitor-get-id          monitor)
			  (tasks:monitor-get-pid         monitor)
			  (tasks:monitor-get-start_time  monitor)
			  (tasks:monitor-get-last_update monitor)
			  (tasks:monitor-get-hostname    monitor)
			  (tasks:monitor-get-username    monitor)))
		monitors)
	   "\n"))))
   
;; update the last_update field with the current time and
;; if any monitors appear dead, remove them
(define (tasks:monitors-update mdb)
  (sqlite3:execute mdb "UPDATE monitors SET last_update=strftime('%s','now') WHERE pid=? AND hostname=?;"
			  (current-process-id)
			  (get-host-name))
  (let ((deadlist '()))
    (sqlite3:for-each-row
     (lambda (id pid host last-update delta)
       (print "Going to delete stale record for monitor with pid " pid " on host " host " last updated " delta " seconds ago")
       (set! deadlist (cons id deadlist)))
     mdb 
     "SELECT id,pid,hostname,last_update,strftime('%s','now')-last_update AS delta FROM monitors WHERE delta > 700;")
    (sqlite3:execute mdb (conc "DELETE FROM monitors WHERE id IN ('" (string-intersperse (map conc deadlist) "','") "');")))
  )

(define (tasks:remove-monitor-record mdb)
  (sqlite3:execute mdb "DELETE FROM monitors WHERE pid=? AND hostname=?;"
		   (current-process-id)
		   (get-host-name)))

(define (tasks:set-state mdb task-id state)
  (sqlite3:execute mdb "UPDATE tasks_queue SET state=? WHERE id=?;" 
		   state 
		   task-id))

;;======================================================================
;; The routines to process tasks
;;======================================================================

;; NOTE: It might be good to add one more layer of checking to ensure
;;       that no task gets run in parallel.

(define (tasks:start-run db mdb task)
  (let ((flags (make-hash-table)))
    (hash-table-set! flags "-rerun" "NOT_STARTED")
    (if (not (string=? (tasks:task-get-params task) ""))
	(hash-table-set! flags "-setvars" (tasks:task-get-params task)))
    (print "Starting run " task)
    ;; sillyness, just call the damn routine with the task vector and be done with it. FIXME SOMEDAY
    (runs:run-tests db
		    (tasks:task-get-target task)
		    (tasks:task-get-name   task)
		    (tasks:task-get-test   task)
		    (tasks:task-get-item   task)
		    (tasks:task-get-owner  task)
		    flags)
    (tasks:set-state mdb (tasks:task-get-id task) "waiting")))

(define (tasks:rollup-runs db mdb task)
  (let* ((flags (make-hash-table)) 
	 (keys  (db:get-keys db))
	 (keyvals (keys:target-keyval keys (tasks:task-get-target task))))
    ;; (hash-table-set! flags "-rerun" "NOT_STARTED")
    (print "Starting rollup " task)
    ;; sillyness, just call the damn routine with the task vector and be done with it. FIXME SOMEDAY
    (runs:rollup-run db
		     keys 
		     keyvals
		     (tasks:task-get-name  task)
		     (tasks:task-get-owner  task))
    (tasks:set-state mdb (tasks:task-get-id task) "waiting")))